How to restrict the change access in CRM for OLTP orders
Hi Guru's,
Please let me know how to restrict the change access in CRM for the orders that are created in ECC. The ECC orders will only for display in CRM but not for change,
We have the orders that are created in ECC, it will flows to CRM and should restrict the access to get in to the change mode in CRM but as of now CRM system is allowing change mode for ECC orders and ending up with errors.
Is there any additional middleware parameter that needs to be added to SMOFPARSFA table to get this functionality! Please advice! Thank your for your help.
Regards
Suneel
Hi.
You can use the PFCG role to control if the user is able to create, change, delete or only display a business transaction type.
Regards.
Similar Messages
-
How to run the setup tables in CRM for 0CRM_LEAD_I datasource.
Hi all,
How to run the setup tables in CRM for 0CRM_LEAD_I datasource.
what is the tcode and steps to follow.
Thankyou.you dont have to do set up tables for 0CRM_LEAD_I.
run the init infopack in BW and then subsequent delta's -
How to restrict the changes in Relesed PO?.
Hi all,
How to restrict the users to make a changes in the Released PO?. User should make the changes only if it is unreleased by the respective codes.
1. Is there any user parameters like functional authorisation?
2. I have already suggested two solutions to the clients that
1. To restrict the authorisation of TCodes ME22n at the user level, but it's not a suitable solution, if user want to make any changes before releasing, then system is not allow to do the changes.
2. I have made release indicator as a 1 - not changeable if it is released, in release strategy settings. But the system is not allowing the all the users including release codes to make the changes?.
If there is any solution, please reply immediately.
with regards,
Raja.hi,
if u set release indicator 1, after release is taken place, for any changes, u need to revoke the release. and then change the PO.
even u cant directly block the changes to already released PO, because, in future if at all qty or some changes is required to change, it should allow u to change! -
What are the Corresponding fields in CRM for sales order in ECC
HI! Experts,
While creating a standard sales order in CRM I want to poulate these fields in ECC Sales order, these fields are
VBKD-BSARK - Purchase order type
VBAK-BNAME - Name: user ordered
VBKD-IHREZ - Web Confirmation Number
VBAK-TELF1 - Telephone number
Or the other way round I want to know what are the corresponding fields in CRM for these fields so that when I pass the data in crmd_order in those fields it gets populated in the above mentioned fields.
Thanks and Regards
MayankMayank,
May I suggest you to create an Order in R/3 with these fields and check that back in CRM. This is not as easy as it may sound. It is possible that some of these fields are "determined" by the system - for example the "Sold-To"'s first telephone number maintained in VBAK-TELF1. So, though it becomes a part of the Order header in R/3, CRM, generally doesn't duplicate them in the transaction but allows to refer back to the master data from the transaction!
Check the following fields in CRM and see if you find the data you require.
VBKD-BSARK - Purchase order type There is a field in CRM that "holds" this value. ACTIVITY CATEGORY. This can be found in the ACTIVITY_H set of the transaction. Filed name CATEGORY. Problem with this is, - "Category Type" of a CRM Activity to be mapped to PO type? Didn't workout good for us since the master data for both vary widely. So, we used custom Header Extension data for this (EEWB). So, you have to work
VBAK-BNAME - Name: user ordered Is usually CREATED_BY in the CRM Order Header (CRMD_ORDERADM_H). But this fills up the VBAK_ERNAM bit not the BNAME.See the next item, that may give a clue if this is related to the next item.
VBAK-TELF1 - Telephone number is usually "determined". Usually the Sold-To's first telephone number maintained in the Business Partner "Communication" section for that Sold-To.
VBKD-IHREZ - Web Confirmation Number Actually it is Customer's or vendor's internal reference as per standard use. Looks like your customer is using it for custom purposes. Well, if you maintain the relationship "Is Correwspondence Recipient for" with the Sold-To partner in CRM, and maintain the details of this Person, then this will be transferred to R/3.
Hint: Once you have the R/3 order in CRM, try using the Report program (SE38) CRM_ORDER_READ in CRM. This is a good tool to "dissect and see" and order in CRM. The program needs only the Transaction Number as the input.
Easwar Ram
http://www.parxlns.com -
How to restrict the changes in VA02?
Hi all,
while PO is created the SO is generating in the (Through ORDERS message type) in the same client . Now i have to restrict this SO from changes by users through VA02, but the changes should be acceptable if they changed the PO in me22n (ORDCHG message type is configured properly).
Please give the solution ASAP ?
Thanks,
Vamshi.Vamshi,
do changes in mv45afzz in form userexit_field_modification.
like :
IF sy-tcode = 'VA02'.
IF message type= 'ORDCHG'.
Error message.
MODIFY SCREEN.
ENDIF.
ENDIF.
Amit. -
How to restrict manual changing of free goods in sales order
Hi ,
Goodmorning ,
We have some requirement : In sales order free goods quantity determination by system should not be allowed to change manually , where can we do this ?
Looking for your inputs
Thanks and regards
VenkatAs per SAP Standard, when the main Item quantity is changed, the Free Goods are redetermined. In this case any manual changes to Free Goods Quantities are lost.
But your requirement is for restricting the Chages of the Quantity of Free Goods Correct?
I believe there is no SAP standard solution for this. You will have to apply a User Exit, which will check the Item category of each LIne item & if it is free goods (TANN) then changes are not permitted.
Hope this helps.
Thanks,
Jignesh Mehta -
How to get the Change Document Header details for a given date
Hi All,
Can anyone help me on this Change Document Header details(CDHDR).
Better way to pull the information of Change Document Header details(CDHDR). No Index is maintained for the tables.
So please suggest better Optimising techniques to get the Change Document Header details(CDHDR).
Using this Function module : CHANGEDOCUMENT_READ_HEADERS how to import the DATE_OF_CHANGE.
Thanks in advance
Regards
ChakriHI,
Go through the documenattion of the FM u can get the details.. and also where used list
Regards,
Nagaraj -
How to restrict the Usage of Rejection Store for an User?
Hi!
I am a QM User. without QAD Knowledge store & Production persons moves the Components to Rejection stores thro' Mvt 311. The rejection Components are getting accumulated and we are questionable for the same.
So Can anybody resolve the problem to restrict the Rejection storage location for an user or any other solution is highly appreciated.
Pls. help me.
Thanks & Regards,
SuryaHi
Avoid particular storage location from QC
this is possible through autherization object M_MSEG_LGO
Go to SPRO->mat mgt->Inventory mgt& physical inventory->Autherisation Manegement>Autherizarion check for storage location-->for you plant & Storage loaction click on Autherization.
When the indicator is set you must have authorization for the authorization object Goods movements: storage location ( M_MSEG_LGO) in order to enter a goods movement in the storage location using a particular movement type.
In M_MSEG_LGO
The authorization object contains four fields:
1.Activity: defines whether the user:
may enter goods movements (Activity=1)
may change goods movements (Activity=2)
may display goods movements (Activity=3)
2.Movement type: defines the movement types you can use to to maintain goods movements.
3.Storage location: defines which storage locations in which plant you may maintain.
4.Plant: defines which plants the user may maintain.
here you can Quarentive Quality people from these storage loactioon.
Regards
Sujit -
How to restrict the Qty & Val in MIRO for Customs
Hi Xperts
I have a reqmnt.
I have found in case of Import procurement process , we are not using GR based IV Indicator in the PO.Also we need to perform MIRO for Customs prior to GR.
1. Hence users need to manually enter the qty/val for all the duties during MIRO(Custom). I have also chkd that users can enter more than the PO-Qty & more then PO-Condition Value as well during that.
2. Also user can do MIRO(for Custom) multiple times as they wish, though MIRO(Custom) has already been completed for that item.
Ho to restrict the above in AP?Plz suggest.
Rgds
SoumickYou requirement can be achieved by enhancement in MIRO.
Check these exits related to MIRO
Enhancement/ Business Add-in Description
Enhancement
LMR1M001 User exits in Logistics Invoice Verification
LMR1M002 Account grouping for GR/IR account maintenance
LMR1M003 Number assignment in Logistics Invoice Verification
LMR1M004 Logistics Invoice Verification: item text for follow-on docs
LMR1M005 Logistics Inv. Verification: Release Parked Doc. for Posting
LMR1M006 Logistics Invoice Verification: Process XML Invoice
MRMH0001 Logistics Invoice Verification: ERS procedure
MRMH0002 Logistics Invoice Verification: EDI inbound
MRMH0003 Logistics Invoice Verification: Revaluation/RAP
MRMN0001 Message output and creation: Logistics Invoice Verification
Business Add-in
INVOICE_UPDATE Business Add-In: Logistics Invoice Verification
refer below link
Code To Find BAdi - ABAP Development - SCN Wiki -
How to find the material received in warehouse for work order through table
Dear All ,
I am creating alerting system We have requrirement that if the notification or work order is pending for 10 days then alert to be sent to planner and 20 days to his senior and 30n days to his senior
We have created FM for this every day program will run and check open work orders and notification pending for some days
Now my question in the FM I want to add fields for material receipt
Idea is say for refuebsihment order pending material is received in warehouse now when this is received alert to be send in the work order planner that material is arrived
From which tables I can track this and how to know for the alerting system that material is arrived in warehouse so alert to be send
please reply
Regards
pratap
Edited by: Pratap bhikai Ingole on Jun 5, 2010 9:20 AMHi ,
With reference to your second point , if your looking for some alret then whenever you have goods receipt or goods issue of stock material you can have a mail triggerred through workflow .. in our project what we did was , we had a user status ALMR - All Material received and this is SET by a Z programme which checks whether all stock materials or non stock materials against the order have been received and sets the user status and this programme is run as a batch job with 30min frequency ....
regrds
pushpa -
How to Set the APPR status in Background for service orders
Hi Friends,
could anybody please ,let me know how to set the APPR satus for the seleted service orders( IW32) in background?
Regards,
Xavier.P.Hi,
Thanks for the reply and you are correct, I am using BADI and I am calling this BAPI inside the method.
Now I am trying to execute this BAPI from SE38 and I am getting the error message, "Error in processing ,Function was not executed". I am able to see this message in the return parameter of the BAPI (Error type - 'E'). And it is giving dump after the call to BAPI_TRANSACTION_COMMIT.
I am using conversion routine 'CONVERSION_EXIT_ABPSN_INPUT' before passing the WBS element to the BAPI.
Please help in this regard.
Regards,
V Kumar
Edited by: V Kumar on Jun 26, 2009 1:42 PM -
SAP how to determine the account in Goods receipt for purchase order?
We know when we make a Goods receipt for purchase order,we will use the account in GBB and BSX define in OBYC. But where can we find the rule? I mean why system can find the account in GBB and BSX , not the other TEcode?
HI
This is again based on the movement type which SAP has created a link internally.
So if you see when a document is posted it basically derives the GL accounts based on the Movement type,Valuation class,valaution area and so on.
Good luck
Hari -
How to restrict the all access ? Single user mode....
I am doing export/import of schema objects from Windows to Oracle. How to make sure when I do the export in the migration database no one else is modifying the data. Is there any single user mode so that I can be sure of only one connection while exporting?
Oracle 10g R2 on Windows Server.
Thank you,
SmithPerhaps you are not familiar with the concept of multi-version read consistency.
No one can see that which is not committed and reads can never be blocked.
If you want a system where no one can see things kill their sessions and do a STARTUP RESTRICT. -
How to restrict the user in MIRO for not modifying price
Hi All
My requirement is How to restrict the users in MIRO screen for not modifying Material Prices of only the for specific ROH types .
For example :
Valuation class RM description
3021 RM - A
3022 RM - B
3024 RM - C
when ever we procure the above Raw materials A,B and C and
the Quantity of each Raw material @ 10 units and value @ 1 INR for each unit
RM - A procured qty 10 @1 total price is INR 10
RM - B procured qty 10 @1 total price is INR 10
RM - C procured qty 10 @1 total price is INR 10
total price of PO is INR 30
when we received invoice material prices are assume it INR 1 is excess for each material.Now the invoice price for each RM has become INR 11.
in MIRO we want restrict the user to change the price from INR 10 to 11.
suggest the best possible ways to restrict in MIRO screen
Thanks & Regards
MalaDear:
Take help of ABABPER fo implement exit using INVOICE_UPDATE or MRMH0003 Logistics Invoice Verification: Revaluation/RAP exit. If this does not help then seek help of MM functional who will help you to find exit for the required task.
rEGARDS -
How to restrict the user from making any changes in Sales order- item level
Hi to all
How to restrict the users from making any changes in sales order at item level if the same sales order is released by senior user through status profile.
Regards
Anish Parikh
Edited by: anish parikh on Jan 24, 2008 5:16 AMHi Anish,
This can be achieved through the roles and authorization.
This can be done through the basis team. they can create user profiles and roles.
For the roles they assign some transaction codes so that they can view the only assigned tr. codes.
Like that ur requirement can be done.
Also u can prevent the user to change any fields in the sales order screen (VA02). for that please modify the authorisations.
Hope i answers.
Reward points if useful.
Edited by: kaleeswaran bhoopathy on Jan 24, 2008 9:57 AM
Maybe you are looking for
-
How many machines can I install the $79.99 version on?
How many machines can I install the $79.99 version on?
-
I have been using the latest version of FCP up to yesterday when I upgraded to V6. Renders that were taking 11 minutes last week are now taking over an hour! Has the code been optimized for Intel? Are us G5 users screwed?
-
Performance bottleneck with 2.2.1 and 2008 R2 os VM's
Hi, I have DL370 g6 with Oracle vm server 2.2.1 installed *72 GB of Memory and 2 dual + quad core processor* All VM's are installed on local disk ( 6 300 GB in Raid 5 )* I have 2 nic connected to siwtch for lan traffic We have 10 VM's with 2008 R2 OS
-
Could not start NetSupport Manager Client For MacOS X because the license e
"Could not start NetSupport Manager Client For MacOS X because the license file has expired." I have a suspicion the above is a result of an old version of a program from a previous version of MACOS having been migrated, even from a PPC machine (PB17
-
Can't Run Java Programs -- java.lang.NoClassDefFoundError Error
I am running 10.4.11. For some reason I can no longer run Java programs. (I could in the past) For example. I create a simple Hello World program as follows and save it as Hello.java: class HelloWorld public static void main (String args[]) System.ou