How to get the Checked box which are clicked

for(int k=0;.....
jsp code
<input type=checkbox name=checkbox value='<%=k%>' >
how to get the particular Checkbox which are checked???

String[] checkedValues = request.getParameterValues("checkbox");You'll get an array filled with the values only for the checked boxes. In other words, if no boxes are checked, checkedValues will be null or checkedValues.length == 0, not sure, going from memory.
Hope this helps!
Patrick

Similar Messages

How to get a check box on the selection screen

Hi all
can any body tell me how to get a check box on the selection screen

parameter: pa_check as checkbox.
To define the input field of a parameter as a checkbox, you use the following syntax:
PARAMETERS <p> ...... AS CHECKBOX ......
Parameter <p> is created with type C and length 1. In this case, you may not use the additions TYPE and LIKE. Valid values for <p> are ' ' and 'X'. These values are assigned to the parameter when the user clicks the checkbox on the selection screen.
If you use the TYPE addition to refer to a data type in the ABAP Dictionary of type CHAR and length 1 for which 'X' and ' ' are defined as valid values in the domain, the parameter automatically appears as a checkbox on the selection screen.
REPORT DEMO.
PARAMETERS: A AS CHECKBOX,
B AS CHECKBOX DEFAULT 'X'.

How to get the last wbs which is displayed in transaction code cj03?

Dear Experts,
   I want to get the last wbs which are displayed in transaction code cj03, i have written below program,but i found it is incorrect. because the sort of wbs in cj03 is not equal to table prps. the last wbs in cj03 is not equal to table prps.
who can tell me how to get last wbs which is displayed in cj03?
SELECT
     PRPS~STUFE
     PRPS~POSID
     PROJ~POST1
     INTO CORRESPONDING FIELDS OF TABLE WA_PRPS_TEMP FROM PRPS INNER JOIN PROJ ON PROJPSPNR = PRPSPSPHI
     WHERE PROJ~PSPID EQ P_PROJECT.
WA_TLINE = LINES( WA_PRPS_TEMP ).
READ TABLE WA_PRPS_TEMP INDEX WA_TLINE.
IF WA_PRPS_TEMP-POSID = P_lastWBS.
    P_LAST = 1
endif.
Best Regards,
Merry

Hi Merry ,
The WBS elements are stored in the table PRPS , so please try using the conversion exit and use the data in internal format then use it in the IF condition.
Check the FM CONVERSION_EXIT_ABPSN_INPUT and CONVERSION_EXIT_ABPSN_OUTPUT
Regards,
Arun

How to name the Check Box as "Want Free Gift" using PARAMETERS statements

Hi all,
I am new to check boxes. I have a existing report where I have to add a check box to the selection screen.
So i said
PARAMETERS: p_cncldc AS CHECKBOX.
everythibng is fine and I get the check box on the selection screen. when i execute the report i get the name of check box as p_cncldc. but i want the name of the check box as "Want Free Gift".
How to name the check box as "Want Free Gift".
if i am saying
PARAMTERS: Want Free Gift AS CHECKBOX. it says a syntax error saying it canot be more that 8 chars.
Some one please help. I am new to Check boxes
Regards,
Jessica Sam
Edited by: jessica sam on Mar 31, 2009 10:37 PM

Text on the Right hand side of check box.
selection-screen begin of block b1.
selection-screen begin of line.
parameters: w_check as checkbox.
selection-screen: comment 4(30) TEST .
selection-screen end of line.
selection-screen end of block b1.
INITIALIZATION.
test = 'Want Free Gift AS CHECKBOX'.
Text on the Left hand side of check box.
selection-screen begin of block b1.
selection-screen begin of line.
selection-screen: comment 2(30) TEST .
parameters: w_check as checkbox.
selection-screen end of line.
selection-screen end of block b1.
INITIALIZATION.
test = 'Want Free Gift AS CHECKBOX'.
OR:
GOTO(Menubar)>Text Elements>Selection Texts
Regards,
Gurpreet

How to activate the Check box in Purchase Order after Goods Receipt

Hi All,
How to activate the check box after Goods receipt of Purchase order in Item view (Goods Receipt is completed).
Where t make the settings in SPRO.
Regards,
Shailendra Hadkar

Hi
SPRO - SAP IMG- Material management - Inventory management and physical inventory - Goods receipt - create purchase order automatically - activate auto Po creation for movement type.
Then activate the auto PO creation in Vendor master - Purchasing view
Check it out.
Regards,
raman

How to get the form name which is used in standard tcode like me23n in sap

how to get the form name which is used in standard tcode like me23n in sap
Moderator message: four out of four threads locked, please read and understand the following before posting further:
[Rules of engagement|http://wiki.sdn.sap.com/wiki/display/HOME/RulesofEngagement]
[Asking Good Questions in the Forums to get Good Answers|Asking Good Questions in the SCN Discussion Spaces will help you get Good Answers]
Edited by: Thomas Zloch on Nov 18, 2011 1:32 PM

how to get the form name which is used in standard tcode like me23n in sap
Moderator message: four out of four threads locked, please read and understand the following before posting further:
[Rules of engagement|http://wiki.sdn.sap.com/wiki/display/HOME/RulesofEngagement]
[Asking Good Questions in the Forums to get Good Answers|Asking Good Questions in the SCN Discussion Spaces will help you get Good Answers]
Edited by: Thomas Zloch on Nov 18, 2011 1:32 PM

How to create the Check box and Text Area inside the Assignment block

Dear all,
        I am new to web UI development. my requirement is to create the Check box and Text box in the Assignment block. Can anyone help me to do this requirement.
Thanks & Regards,
Ashok.

Hi,
Please place the below code in the GET_P methods of the fields.
For Text Area
CASE iv_property.
    WHEN if_bsp_wd_model_setter_getter=>fp_fieldtype.
      rv_value = cl_bsp_dlc_view_descriptor=>field_type_textarea.
ENDCASE.
For Check Box
CASE iv_property.
    WHEN if_bsp_wd_model_setter_getter=>fp_fieldtype.
      rv_value = cl_bsp_dlc_view_descriptor=>field_type_checkbox.
ENDCASE.
Regards,
Lakshmi.Y

How to pass the check box values from one view to another view

Hi Experts,
I have a selection screen view which consists of check boxes.
WBS System status.
Release                      Completed                  Closed as 3 check boxes.
Note : The above ones are check boxes.
Based on the selection made by the user, those values needs to be passed to second view which retrieves the data and
displays the data accordingly.
At the same time if the user does not make any selection, then WBS System status should contain Released, Completed and Closed values and that needs to be sent to Second view.
Kindly advise.
Regards,
Chitrasen

hi ,
make a attribute of type WDY_BOOLEAN to achieve this functionality
u need to follow these steps :
1 in side ur component controller , under the ATTRIBUTES tab , make 3 attributes say attr1 , attr2 and attr3 of type WDY_BOOLEAN
2 create a context node , cn_check and 3 context attribute ca_check1 , ca_check2 and ca_check3 in ur first view for
release , complete and close check boxes
3 inside the DOINIT of ur 1st view , set the attributes attr1 , attr2 and attr3 to blank
wd_comp_controller->attr1 = ' '
wd_comp_controller->attr2 = ' '
wd_comp_controller->attr3 = ' '
4 inside the method , where u r validating , if the check boxes are checked or not , read the attributes ca_check1 , ca_check2 and
ca_check3
DATA lo_nd_cn_check TYPE REF TO if_wd_context_node.
    DATA lo_el_cn_check TYPE REF TO if_wd_context_element.
    DATA ls_cn_check TYPE wd_this->element_cn_check.
    DATA lv_ca_check1 LIKE ls_cn_check-ca_check1.
*   navigate from <CONTEXT> to <CN_CHECK> via lead selection
    lo_nd_cn_check = wd_context->get_child_node( name = wd_this->wdctx_cn_check ).
*   get element via lead selection
    lo_el_cn_check = lo_nd_cn_check->get_element( ).
*   get single attribute
    lo_el_cn_check->get_attribute(
      EXPORTING
        name = `CA_CHECK`
      IMPORTING
        value = lv_ca_check1 ).
IF lv_ca_check1 EQ 'X' .
wd_comp_controller->attr1 = ' X'
wd_comp_controller->attr2 = 'X '
wd_comp_controller->attr3 = ' X'

Help requested: How to pass the (check box) selected rows data to other scr

Hi friends, Here is a situation where I have to pick only those records data which i select by checking the check boxes and carry on to next screen where I have to display them and do some processing on such selected rows of data. Can any one suggest me how to code this. Thanks in advance.

Hi Subbarao,
One way is to check if the field is selected by checking if the field value = 'X'.
If it is a table control we will have to loop and find out which all records are selected..it is notable that the check box field will mostly be of single character and contain 'X' if it is checked and space if not checked
Based on the structure where the check box is held we may have to implement various logic to retrieve whether the field is checked or not....for instance we can move data to another internal table for which the checkbox is checked and can retrieve it from the next screen
Pls check,revert and reward if helpful
Regards
Byju

How to get the PDF data which i have send to Spool

Dear Freinds,
               My requirement is to display the output which iam getting from a custom report(ZSALARY) in the form of PDF . So now i wanted to display the ALV output on to my desktop (as of now) in PDF format.
i have done the below coding please correct me why iam not getting the same data which is coming out of my report in the PDF, iam passing the same internal table.
IF NOT it_final[] IS INITIAL.       -
>IT_FINAL is my main internal table in the report ZSALARY
      DATA : count TYPE syprcop,
         days TYPE sypexpi,
         params TYPE pri_params,
         valid TYPE c,
      pdf_table TYPE rcl_bag_tline,
      spoolid TYPE rspoid,
      pdf_fsize TYPE i.
        CALL FUNCTION 'GET_PRINT_PARAMETERS'
          EXPORTING
            destination    = 'LP01'
            copies         = count
            list_name      = 'ZSALARY'   -
tHIS IS MY REPORT NAME
            list_text      = 'ZSSPOOL'
            immediately    = ' '
            release        = 'X'
            new_list_id    = 'X'
            expiration     = days
            line_size      = 90
            line_count     = 65
            layout         = 'X_PAPER'
            sap_cover_page = 'X'
            receiver       = 'SAP*'
            department     = 'System'
            no_dialog      = 'X'
          IMPORTING
            out_parameters = params
            valid          = valid.
        NEW-PAGE PRINT ON PARAMETERS params NO DIALOG.
        WRITE : 'hi this is the test for spool'.
        NEW-PAGE PRINT OFF.
        COMMIT WORK.
        WRITE : / 'The Spool no is ', sy-spono. "system variable for spool no
        spoolid = sy-spono   .       -
At this point i can see the spool no.
        CALL FUNCTION 'CONVERT_ABAPSPOOLJOB_2_PDF'
          EXPORTING
            src_spoolid   = spoolid
            no_dialog     = 'X'
          IMPORTING
            pdf_bytecount = pdf_fsize
          TABLES
            pdf           = pdf_table
          EXCEPTIONS
            OTHERS        = 0.
        CHECK sy-subrc = 0.
        CALL FUNCTION 'GUI_DOWNLOAD'
          EXPORTING
            bin_filesize = pdf_fsize
            filename                = 'C:\Documents and Settings\Administrator\Desktop\test.pdf'
            filetype                = 'BIN'
          TABLES
            data_tab                = it_final
          EXCEPTIONS
            file_write_error        = 1
            no_batch                = 2
            gui_refuse_filetransfer = 3
            invalid_type            = 4
            OTHERS                  = 5.
      ENDIF.
if i go and on my desktop it is saying the below error "ADOBE READER COUDNT OPEN 'test.pdf'
because it is either not supported file type or because the file has been damaged.
my aim is to get the data which is there in IT_final in the PDF .....please correct me the parameters which i have given wrong. my doubt is in GUI_download fM in the tables should i pass it_final or
the pdf_table coming from'CONVERT_ABAPSPOOLJOB_2_PDF'...... i tried this option iam able to open and it is just giving message which i kept before this FM i.e WRITE : 'hi this is the test for spool'.
what i should to get my internal table data.
Pls help.
regards
srinivas.

Dear Karthik,
          Thank you for giving me the link there by iam able to get the ouput download int he pdf
as below code , but now a small problem for me .......i have 10 fileds in the Report ouput ....but however in the pdf output i can see only 8 fields and the two fields got truncated . Could you please tell me what
i have to change in my below code so that i can get all the values
IF NOT it_final[] IS INITIAL.
data : it_tsp01 type standard table of tsp01,
       l_wa_tsp01 type tsp01.
        CALL FUNCTION 'GET_PRINT_PARAMETERS'
          EXPORTING
            destination    = 'LP01'
            copies         = count
            list_name      = 'ZHR_BON'
            list_text      = 'ZSSPOOL'
            immediately    = ' '
            release        = 'X'
            new_list_id    = 'X'
            expiration     = days
            line_size      = 90
            line_count     = 65
            layout         = 'X_PAPER'
            sap_cover_page = 'X'
            receiver       = 'SAP*'
            department     = 'System'
            no_dialog      = 'X'
          IMPORTING
            out_parameters = params
            valid          = valid.
SUBMIT (sy-repid) TO SAP-SPOOL
                 SPOOL PARAMETERS mstr_print_parms
                 WITHOUT SPOOL DYNPRO
                WITH pnppernr = p0001-pernr
                 AND RETURN.
CALL FUNCTION 'CONVERT_ABAPSPOOLJOB_2_PDF'
          EXPORTING
            src_spoolid   = spoolid
             no_dialog     = 'X'
             DST_DEVICE = params-PDEST
           IMPORTING
           pdf_bytecount = pdf_fsize
          TABLES
            pdf           = pdf_table
          EXCEPTIONS
            OTHERS        = 0.
        CHECK sy-subrc = 0.
        CALL FUNCTION 'GUI_DOWNLOAD'
          EXPORTING
            bin_filesize            = pdf_fsize
            filename                = 'C:\Documents and Settings\Administrator\Desktop\test.pdf'
            filetype                = 'BIN'
          TABLES
            data_tab                = pdf_table    "it_final
          EXCEPTIONS
            file_write_error        = 1
            no_batch                = 2
            gui_refuse_filetransfer = 3
            invalid_type            = 4
            OTHERS                  = 5.
      ENDIF.
Please tell me how i can get the all the fields which are there in my normal alv output ......
Case 1) .i wanted all the 10 fields in PDF to be displayed without truncated , I have checked in Spool ........ i found all the fields are there .....but however when i check the downloaed PDF i can see some fields are getting truncated.
Case 2) However if on the ALV output if the user hides 2 fields out of 10 fields then only 8 feilds which are appearing on the output before sending the Spool should only be displayed in PDF as well -
> for this scenario what i have to do.
Thanks Once again.
regars
srini.

How to change the check box with the push button in itrator table rows

Hi all,
I want to change the check box of the itrator table rows with push button/ some thing better as to give
the table view more good look and user friendly.
Does any one has tried any other option in table view in place of check box
Thanks
Bhagat

There are various objects which you can create via iterators. Please see the application SBSPEXT_TABLE for more details.
DATA: lo_text      TYPE REF TO cl_htmlb_textview,
        lo_ddlb      TYPE REF TO cl_htmlb_dropdownlistbox,
        lo_input     TYPE REF TO cl_htmlb_inputfield,
        lo_button    TYPE REF TO cl_htmlb_button,
        lo_chk_bx    TYPE REF TO cl_htmlb_checkbox.
row_ref = p_row_data_ref.
CASE p_column_key.
    WHEN 'EFF_DATE'. " Input field
      CREATE OBJECT lo_input.
      lo_input->id       = p_cell_id.
      lo_input->type     = 'DATE'.
      lo_input->showhelp = 'TRUE'.
      lo_input->width    = '60'.
      lo_input->invalid = 'true'.
      p_class            = `ao`.
      lo_input->value     = get_column_value( p_column_key ).
      p_replacement_bee = lo_input.
    WHEN   'NEW_LOC'. " Drop down list box
      CREATE OBJECT lo_ddlb.
      GET REFERENCE OF gt_persa INTO lo_ddlb->table.
      lo_ddlb->id                = p_cell_id.
      lo_ddlb->nameofkeycolumn   = 'NAME'.
      lo_ddlb->nameofvaluecolumn = 'VALUE'.
      lo_ddlb->selection         = get_column_value( p_column_key ).
      lo_ddlb->selection = 'DUMMY'.
      p_replacement_bee          = lo_ddlb.
    WHEN 'MON' . " Check box
      CREATE OBJECT lo_chk_bx.
      lo_chk_bx->id = p_cell_id.
      lo_chk_bx->checked = get_column_value( p_column_key ).
      p_replacement_bee = lo_chk_bx.
    WHEN 'NEW_MGR_SRCH'. " Button
      CREATE OBJECT lo_button.
      lo_button->id            = p_cell_id.
      lo_button->text          = 'Search Mgr'.
      lo_button->onclientclick = 'script'.
      p_replacement_bee = lo_button.
    WHEN OTHERS. " Text
      CREATE OBJECT lo_text.
      lo_text->id       = p_cell_id.
      lo_text->wrapping = 'FALSE'.
      lo_text->text     = get_column_value( p_column_key ).
      lo_text->design   = 'STANDARD'.
      lo_text->textcolor = 'POSITIVE'.
      p_replacement_bee = lo_text.
ENDCASE.
Thanks
A

How to read the check box value in alv report

hi experts,
i m working on one alv report where i m using the check box for field selection in alv display.
but i don't know how to read the only selected fields.
wa_fieldcat-fieldname = 'BOX'.
wa_fieldcat-tabname = 'IT_HEADER'.
wa_fieldcat-seltext_m = 'Box'.
wa_fieldcat-checkbox = 'X'.
wa_fieldcat-input = 'X'.
wa_fieldcat-edit = 'X'.
APPEND wa_fieldcat TO i_fieldcat.
CLEAR wa_fieldcat.
wa_fieldcat-fieldname = 'AUFNR'.
wa_fieldcat-tabname = 'IT_HEADER'.
wa_fieldcat-seltext_m = 'Sales Doc'.
wa_fieldcat-hotspot = 'X'.
APPEND wa_fieldcat TO i_fieldcat.
CLEAR wa_fieldcat.
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
   EXPORTING
     i_callback_program                = v_repid
     I_CALLBACK_PF_STATUS_SET          = 'SET_PF_STATUS'
     i_callback_user_command           = 'USER_COMMAND'
     i_callback_top_of_page            = 'TOP_OF_PAGE'
     it_fieldcat                       = i_fieldcat[]
     i_save                            = 'A'
     it_events                         = v_events
    TABLES
      t_outtab                          = it_header
EXCEPTIONS
PROGRAM_ERROR                     = 1
OTHERS                            = 2
*&      Form USER_COMMAND
      text
     -->R_UCOMM    text
     -->,          text
     -->RS_SLEFIELDtext
FORM user_command USING r_ucomm LIKE sy-ucomm
rs_selfield TYPE slis_selfield.
CASE r_ucomm.
when '&RELEAS'.
endcase
endform.
i gone through some already posted que for same problem i tried options like
loop at it_header.
endloop.
but i m getting box field empty.
is there i missed something? plz sugeest.. if u have any other solution plz post...

Have this code in your user command fm:
* For capturing changed data
CALL FUNCTION 'GET_GLOBALS_FROM_SLVC_FULLSCR'
    IMPORTING
      e_grid = w_grid.
CALL METHOD w_grid->check_changed_data
    IMPORTING
      e_valid = w_valid.
IF w_valid = 'X'.
loop at itab where mark = 'X'.
endloop.
ENDIF.
Regards,
Ravi

How to get dynamic check box value in NW Mobile 7.1

Hi,
i have 5 rows it contains dropdown and checkbox in a row.when i click update button i need the values of checkbox.How to get?
Regards,
Kanagaraj.

Hi Vidyadhar,
I have dropdown in first page.based ondropdown value selected navigating to next page.In that i am using row repeater it has label,checkbox and dropdown.here i need to know whether the check box is checked or not while clicking update button.
Drow down value also not able to get.
How to get Checkbox and dropdown values?
can u provide some sample codes??
Regards,
Kanagaraj.

How to use the check box?

How is the check box to be used? If I have 10,000 songs in my itunes library and have 1,000 of them checked, how can I place all 1,000 checked songs into a new playlist that I have created just for them. They are not located together in my library so I can't just hold down the SHIFT key and highlight them all for movement. Also, I would rather not have to hold down the CONTROL key and then search through 10,000 songs for the 1,000 I have checked. So what is the secret to accomplishing this?
Can you sort your library by whether a songs is checked or not? If I could sort them all together as a group, then I could use the SHIFT key to highlight and move them all.
Am I missing something here? How can you select and sort songs by whether they are checked or not in your library?
Thanks so much for any help you can provide.

If only the 1,000 songs you want are currently checked, create a Smart Playlist to collect them.
How to Create a Smart Playlist
- File=>New Smart Playlist
- Playlist is 'whatever playlist you want to use'
- Match only checked songs
Note: There is no way to select the Main Library. If you're working with the Library as a base, you'll need un-check the 'Match the following rule' and check 'Limit to' and put a high enough number to capture all the songs.
Several ways to creatively manage the issue.
You may wish to create a Static Playlist once you are done, and drag those songs into it for more permanence.
Post back if you have more questions.

How to find the check box selected while using Class in ALV grid display

hi,
I am displaying the ALV report using Class
For Example: CALL METHOD MYGRID->SET_TABLE_FOR_FIRST_DISPLAY EXPORTING I_STRUCTURE_NAME = 'ACC1'
                                                         IS_VARIANT = GS_VARIANT
                                                         I_SAVE = 'A' "XSAVE
                                                         IS_LAYOUT = LOUT
                                                 CHANGING IT_FIELDCATALOG = IT_FIELD
                                                           IT_OUTTAB = ACC_NO[].
In output i am getting 10 customer with check box, how do i find that customer number is selected.

HI,
Once user selects a check box, he would CLICK on a button ( say PROCESS )inorder to do the processing for the selected records. So in the PAI, under the EVENT ( OK CODE ) of the Button ( say PROCESS ), write the following code.
CALL METHOD MYGRID->check_changed_data.
Now,
Loop at acc_no where check = `X`.
Do the processing.
endloop.
Best regards,
Prashant

How to get the Checked box which are clicked

Similar Messages

Maybe you are looking for