How to get the history(datapoints) of 32 waveform-charts which are in one cluster?

Thanks in advance. I would like to handle up to 32 waveform-charts by using a cluster. My problem is that the datapoints of their history has to be saved if a particular event occures. How can I get the character-node for the history of a waveform-chart inside the cluster?

I'm not certain what you are asking, but here's a suggestion. On the front panel, you can pop-up (right-click) on a waveform chart within a cluster and create a property-node (for the history), which can be manipulated as you desire on the diagram.

Similar Messages

Dynamically how to get the meta data of an ui element which is custom one

Hi All ,
In SRM , I want to know the meta data declarations of an UI element in my webdynpro component ..How to know this ..Can anyone help me in this ..I want to know the meta data of an ui element .
Sandeep

You really aren't supposed to read the properties of active UI elements directly. Instead they should be bound to context attributes and then you read these attributes via normal context APIs. If you absolutely needed such access because this is a standard SAP WD, then consider that the WDDOMODIFYVIEW is the only part of th event loop where you are allowed access to the View and its UI elements.

I have an Apple I Phone 4S which is great but, can someone help me how to get the photos and videos to my PC which runs on MS XP. I would like to be able to edit and copy to a DVD.

I have an Apple I Phone 4S which is great but, can someone help me how to get the photos and videos to my PC which runs on MS XP. I would like to be able to edit and copy photos and videos to a DVD.

Connect your iPhone to your computer. Tp your pc should recognize your iPhone as a camera. Use what ever application you have on the pc to transfer files from a camera to your computer.

How to get the history data from r3?

Hi Experts,
I have loaded stock data for jan through the flat file load.
The stock consists for 2,9,16,23,30 th dates of Jan.
Remaining dates stock came from R3.
so problem is stock seems double(Not exactly) for one site(Plant).
i checked in BI and i dont see any stock data for 31st Jan but it is there in R3.
So how to get the data for 31st jan from R3 it is using the 2LIS_03_BX Extractor (Tables - MSEG,BSEG).
i am really stuck up here please help me out..
Thanks in advance,
Regards,
<BMP>

You can get it from LBWE transaction in R/3 side:
for example see below:
Sales and Distribution (SD)          : application 11, 13, 08 (in LBWE T-code)
Materials Management (MM)        : application 03, 02
Logistics Execution (LE)               : application 12
Quality Management                  : application 05
Plant Maintenance (PM)              : application 04, 17
Customer Service (CS)               : application 18
Project System (PS)                   : application 20
SAP Retail                                    : application 40,43,44,45

How to get the selected node value of a tree which is build on java code

Hi Experts,
How can i get the selected node value if I build the tree programatically.
I am using the following code in selectionListener but it is throwing error.
RichTreeTable treeTable = (RichTreeTable)getQaReasontreeTable();
CollectionModel _tableModel =
(CollectionModel)treeTable.getValue();
RowKeySet _selectedRowData = treeTable.getSelectedRowKeys();
Iterator rksIterator = _selectedRowData.iterator();
String selectedQaCode ="";
while (rksIterator.hasNext()) {
List key = (List)rksIterator.next();
JUCtrlHierBinding treeTableBinding =
(JUCtrlHierBinding)((CollectionModel)treeTable.getValue()).getWrappedData();
JUCtrlHierNodeBinding nodeBinding =
treeTableBinding.findNodeByKeyPath(key);
String nodeStuctureDefname =
nodeBinding.getHierTypeBinding().getStructureDefName();
selectedQaCode = selectedQaCode + nodeBinding.getAttribute(0);
where I am using following link to create a tree with java code.
http://one-size-doesnt-fit-all.blogspot.com/2007/05/back-to-programming-programmatic-adf.html
Please help me in resolving this issue.
Regards
Gayaz

Hi,
you should also move
JUCtrlHierBinding treeTableBinding =
(JUCtrlHierBinding)((CollectionModel)treeTable.getValue()).getWrappedData();
out of the while loop as this is not necessary to be repeated for each key in the set
Frank

How to update the absolute time value in waveform chart for labview 6i?

Hey there,
I'm developing a control system using labview 6i on win 2000 os.I'm receiving the sensor data every minute and i want to display the data on a waveform chart with absolute time scale on x-axes. I'm using the property nodes for the offset, multiplier and maximum values putting them outside the while loop and giving them input using get date/time in seconds function. the problem is that the time doesn't gets updated w/ refernce to the computer time and after a certain period the time shown on x-axes lags by several hours. any advise?

Posting an example ussually help us nail these types of issues fast.
I am therfore forced to guess.
Do you have your code written such that the scale operations occur before the loop?
The next thing I have to suspect (not being able to see your code) is if your dt is correct. If your dt is larger than what the chart is set for, then the time will fall behind.
I have included an image showing how the chart can be used to show multiple sample rate plots such that the t0 of the readings are used to control how the readings are displayed. This example uses waveform data types (I believe they were available back in 6i). It should serve as a guide to do what you want.
I suggest you start by recreating the demo and play with it until you have what
you will need in your app.
The beauty of this method is it lets you use the chart to plot signals acquired at different frequecies and plot them all together.
reply to this answer if you have questions,
Ben
Ben Rayner
Certified LabVIEW Developer
www.DSAutomation.com
Ben Rayner
I am currently active on.. MainStream Preppers
Rayner's Ridge is under construction
Attachments:
Wform_demo.bmp ‏427 KB

Getting the right nvidia drivers?/gnome3 problems (which are realated)

I am having trouble getting the correct drivers for my graphics card, and problems with gnome3. before I wright anymore I would like to say that I have seen and heard about "the arch way" and that moderators can be unnecessarily rude sometimes, I hope that these things aren't true and that you are a nice group of people. (Which is what I have seen so-far
I have a dell optiplex gx620 with a ******* graphics card
I went through the beginners guide on the arch wiki it told me to install several different drivers, I installed this driver: xf86-video-nouveau (along with gnome3)
I changed my .xinitrc and typed in startx
gnome3 put me into failsafe mode
I tried the nouveau-dri drivers
when I had rebooted and ran startx it gave me the error that it had crashed so I went back into text mode the text on the screen said something about eth0 not being connected, so I ran dhcpdc etho0 and then tried startx again, and it didn't fail.
why would being connected to the internet have anything to do with gnome3 working or not? (I realize that this is a gnome problem, but if anybody could help then it would be great)
it was still in fallback mode.
my question is, how do I get gnome3 to work?
thank you in advance
-Jared

According to this link:
http://www.dell.com/downloads/global/pr … 620_en.pdf
You have either an Intel integrated graphics solution or ATI. Neither should have Nouveau. It is very, very likely you have a dedicated GPU card. But, to help, the model and make of the graphics solution will really be needed.

How to get the data from 2 out ports (tables) of BAPI into one table

I have a BAPI that has two out ports (header and detail). How do I display this data in one table.
Thanks,
Subba

Hi,
you have the Union operator to merge multiple datasets into one dataset
regards Tobias

How to get the value of a variable in FOX?

Hi,
In the FOX program how to get the value of a variable defined in planning area?
can anyone give me some sample code?
thanks

Adding to the last reply,
you can use VARI(variable) to get the count of the values.
In the latest version of BPS, you may also use the following new foreach construct:
FOREACH var IN VARIABLE variable_id.
Regards - Ravi

How to get the customize url of an portlet using PLSQL

How to get the customize url of an portlet using PLSQL.

Are you trying to call the portlet Customization form directly from the browser?

How to get the co-ordinates(X-axis and y-axis) for irregular static map

hi all,
i am trying to get the co-ordinates like latitude and longitude which are used in google map in an irrregular Static Maps,and i also want to know how can i Get perfect location Depending on Coordinates which i given using Page items.
can any help me pls
I AM USING APEX 4.1.1
thanks,
Pavan
Edited by: Pavan on May 29, 2012 7:58 AM

hi VC,
Thanks for your reply,,
I Just want to Develop a static map that is not using any Google api or Google Maps,Its like Google maps but not totally a Map which resembles Google map. But i want to have an access of coordinates in an static regular Map where with the help of coordinates we can find any point on that static map's .
Thanks & Regards:
Pavan

How to get the Objects which are used in the webi Report.

Hi Expert,
I am trying to get the list of WebI reports and Objects which are present in the report at BO 4.0.
I can able to get details for only the list of reports and universes.
Could any one help me to get those details.
Regards,
Murali S

With 4.0, there is no longer a way to do this using just the .NET SDK because the ReportEngine SDK no longer exists for .NET. Instead, you'll have to look at using the RESTful Web Services SDK for Webi which runs in the Web Application Container Server on your report server (NOT on the web server!)
RESTful web services are platform-independent and don't require the installation of any SDK files. Everything is done through standard HTTP Get, Put, and Post commands and the results are returned in either XML or JSON format. You don't mention which service pack of 4.0 you're on, but the RESTful web services have evolved over the course of the 4.0 service packs, so more recent is definitely better.
You can find the documentation for this in the "Development Information" section at help.sap.com/bobip40. There is also a "space" on SCN for this at http://scn.sap.com/community/restful-sdk and there are some links on this page for various resources and sample code.
-Dell

How can I get the history of the subprogram i.e Procedure ........?

How can I get the history of the subprogram i.e Procedure ........?

annu_rajput wrote:
I mean I want to see .
When procedure was created.?
what was the original code ..?
what are the modification done since ..?
who has modified it ......?This is not a task for Oracle. This is a task for a version control system.
You can see when a procedure has been created in ALL_OBJECTS (CREATED and LAST_DDL_TIME columns) but even using flashback queries on this table you don't expect to go back for long.
Definitely you cannot see who has modified it. You can only see the procedure owner.
Again, Oracle is NOT a version control system. You are on the wrong way.
Regards.
Al

I'm an admin. How do I get the history of standard users on my computer.

I'm an admin. How do I get the history of a standard user on my computer if they have a password, namely my son?

Specific tracking requires additional software, from OS X server to 3rd party tools.
Look at Safari history for the easiest clues.
>His account has a password that I don't know. Can't get in without a password.
Now it sounds like a con. If you're the admin, you can can get in at that level. Reset it if you need to.

How to get the original version of Web report in BW ?

Hello Friends ,
I have transported one Web report from BW development to BW Production System.
But unfortunately , the desired result not me met .
So I have been asked to keep the original version of the Web report.
As the new version of Web report has replaced the previous one ,
So could anybody tell me how to get the original version of Web report in BW ?
Many thanks in advance !!!!!!!!

Hi,
You can use the Transaction STMS choose the option "Import Overview" . In the GOTO tab select "History" and choose "Import History".
Here you can find the history of requests imported to the prod system.
Regards,
K.Manikandan.

How to get the history(datapoints) of 32 waveform-charts which are in one cluster?

Similar Messages

Maybe you are looking for