How to know the table name of an InfoCub if we know cube technical name?

How to know the table name of an ODS if we know the ODS technical name?
Thanks
Message was edited by: Kevin Smith

hi kevin
if the ODS is a standard ODS then you check the following way in SE16
(for custom ODS objects)
/BIC/A<ODS technical name>00 (Active Data Table)
/BIC/A<ODS technical name>40 (Activation Queue)
/BIC/B<10 digit number> (Change Log Table)
(for SAP defined ODS Objects)
/BI0/A<ODS technical name>00 (Active Data Table)
/BI0/A<ODS technical name>40 (Activation Queue)
/BI0/B<10 digit number> (Change Log Table)
and for Transactional ODS Object you will have only the active data Table. So you need to check with /BIC/A<ODS technical name>00 for the custom ODS objects and /BI0/A<ODS technical name>00 for SAP defined ODS objects.
hope this helps.
regards
vijaykumar

Similar Messages

How to know the tables for a datasource like 2lis_17_order

Hi,
How to know the tables for a data source like 2lis_17_order, i have checked in Extract structure of that data source, only fields are visible but how will i know that these fields are getting extracted from so and so tables?
pls respond. thanks in advance

Hi,
Go to RSO2 at source system, Enter data source and click on display.
if its table based then you can see table name there it self.
if its view based then notedown the view name and go to SE11, provide view and click on display. see joined table names there.
Thanks

How to let sql server 2008 know the table created at front end in c#

How to let sql server 2008 know the table created at front end in c#

The best solution is to create table type and pass the DataTable as table-valued parameter. I have an article on my web site about this:
http://www.sommarskog.se/arrays-in-sql-2008.html
The full article is a bit of overkill for what you are doing right now, but just the few first pages should get you going.
Erland Sommarskog, SQL Server MVP, [email protected]

How to see the Table Names & Field Names by other than F1 help

Hi Experts
   How to see the Table Names & Field Names by other than F1 help, & How to see the List of MM Table Names.
Rgds

The only option to see the active table/ field name is through F1 --> Technical Information. Apart from this, you can use any 3rd part application like GUIex (INbuilt in SAP ECC 6.0 ... can be activated by clicking on the tri-color button on the top right), but you need technical knowledge to understand the information. As far consolidated list of MM tables is concerned, SAP don;t provide you the same at one place, it experience and knowledge which help you in this regard. For your immediate reference MM tables are as under :
EBAN - Purchase Requisition
EBKN - Purchase Requisition Account Assignment
EBUB   - Index for Stock Transport Requisitions for Materi
EINA    - Purchasing Info Record: General Data
EINE     - Purchasing Info Record: Purchasing Organization D
EIPA     - Order Price History: Info Record
EKAB   - Release Documentation
EKAN   - Vendor Address: Purchasing Document
EKBE    - History per Purchasing Document
EKBEH - Removed PO History Records
EKBZ    - History per Purchasing Document: Delivery Costs
EKBZH - History per Purchasing Document: Delivery Costs
EKEH    - Scheduling Agreement Release Documentation
EKEK    - Header Data for Scheduling Agreement Releases
EKES     - Vendor Confirmations
EKET     - Scheduling Agreement Schedule Lines
EKETH   - Scheduling Agreement Schedules: History Tables
EKKI      - Purchasing Condition Index
EKKN    - Account Assignment in Purchasing Document
EKKO    - Purchasing Document Header
EKPA     - Partner Roles in Purchasing
EKPB     - "Material Provided" Item in Purchasing Document
EKPO    - Purchasing Document Item
EKPV    - Shipping-Specific Data on Stock Tfr. for Purch. D
EKRS    - ERS Procedure: Goods (Merchandise) Movements to b
EKUB    - Index for Stock Transport Orders for Material
EORD    - Purchasing Source List
EQUK    - Quota File: Header

I want to know the table name and field name of this description

i want to know the table name and field names of this description
supplieriddomain

Hi SV,
Try this:
1) Go to SE15 (Repository info system)
2) Expand ABAP Dictionary
3) Expand Fields
4) Click on Table Fields
5) Enter the field name you want to search in field name or use wild cards with keywords in short decription field (like supplier ) and Execute.
OR
If it's a screen field, do a F1 on the field and click on Technical information on the help window popped up from Menu..this will tell you the field name along with structure or table name.
Hope this helps you.
Regards,
Vivek

I want to know the table name and field names of this descriptions

i want to know the table name and field names of this descriptions
FPAApprover.UniqueName,FPAApprover.PasswordAdapter

Hi Ramana,
Go to the system table DD03T , use the table contents..
In the field ' DDTEXT ' , give your keywords...
for ex : say Unique name... as UniqueName* in field DDTEXT
Execute.. u will find the entries....
May be ur problem will be solved...
Thank u...
Reward if useful and close the thread..
Rajiv

I like to know the table name where all the Interface name ( Data Type and

Dear Friends,
I like to know the table name where all the Interface name ( Data Type and Message Type in IR ) is stored.
Thanks.

Hi,
Please find the repository APIs in the SE24 class builder that can be used for accessing repository objects from the ABAP stack of SAP XI. Check CL_SRAPI* in the SE24 transactions for digging further.
location of interface objects
CL_SRAPI_DATA_TYPE---data type
CL_SRAPI_DATA_TYPE_ENH---data type enhancement
CL_SRAPI_FAULT_MESSAEG_TYPE--fault message type
CL_SRAPI_MESSAGE_TYPE--message type
CL_SRAPI_INTEGRATION_SCENARIO--integration scenario
have a look at the table SXMSPMAST, SXMSCLUP & SXMSCLUR
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/4fbe7b8e-0a01-0010-b69b-b7e717378f22#search=%22SXMSPMAST%20%2B%20XI%22
That document has references to lot of tables maybe it can be of use to u.
Look at the below thread for SXMB_MONI tables and Function module:
In Which Database Table the Messages are Stored in XI
Message Monitoring --> corresponding tables?
Edited by: Dharamveer Gaur on Oct 8, 2008 10:40 AM

How can i know the table fragments

Hi
How can i know the table is fragmented.
Thank you

If you're in 10g you could try use the Segment Advisor to identify various issues etc with your table. This will also provide recommendations on how to improve things.
(below script shamelessly stolen from the brilliant Oracle Base website)
-- segment_adv_table.sql
-- Use Segment Advisor to analyse a table.
-- Original Version
-- http://www.oracle-base.com/articles/10g/SpaceObjectTransactionManagement10g.php
-- owner is SCOTT
-- table is EMP
-- do a search/replace to change these 2 values and re-run it ;)
DECLARE
l_object_id NUMBER;
BEGIN
-- Create a segment advisor task for the SCOTT.EMP table.
DBMS_ADVISOR.create_task (
advisor_name => 'Segment Advisor',
task_name => 'EMP_SEGMENT_ADVISOR',
task_desc => 'Segment Advisor For EMP');
DBMS_ADVISOR.create_object (
task_name => 'EMP_SEGMENT_ADVISOR',
object_type => 'TABLE',
attr1 => 'SCOTT',
attr2 => 'EMP',
attr3 => NULL,
attr4 => 'null',
attr5 => NULL,
object_id => l_object_id);
DBMS_ADVISOR.set_task_parameter (
task_name => 'EMP_SEGMENT_ADVISOR',
parameter => 'RECOMMEND_ALL',
value => 'TRUE');
DBMS_ADVISOR.execute_task(task_name => 'EMP_SEGMENT_ADVISOR');
END;
-- Display the findings.
SET LINESIZE 250
COLUMN task_name FORMAT A20
COLUMN object_type FORMAT A20
COLUMN schema FORMAT A20
COLUMN object_name FORMAT A30
COLUMN object_name FORMAT A30
COLUMN message FORMAT A40
COLUMN more_info FORMAT A40
SELECT f.task_name,
f.impact,
o.type AS object_type,
o.attr1 AS schema,
o.attr2 AS object_name,
f.message,
f.more_info
FROM dba_advisor_findings f
JOIN dba_advisor_objects o ON f.object_id = o.object_id AND f.task_name = o.task_name
WHERE f.task_name IN ('EMP_SEGMENT_ADVISOR', 'USERS_SEGMENT_ADVISOR')
ORDER BY f.task_name, f.impact DESC;

Want to know the tables of a particualr transaction code

Hi,
whatz the technique of knowing the tables of a particular transaction code.
I have got a tcode - va01.
Want to know the tables of this transaction code.
How...?

Hi,
If you want know about transaction code table details
1. Enter Tcode 'ST05' (SQL Trace on), You can find how many tables are involved in the tcode
2. Goto SE93, enter VA01 and find the program name, Go to object browse (se80) and enter program name and find out how many tables are invloved (Another way go to search- Give search term 'Tables' -> there u can find the tables involved.
Regards
Bhupal Reddy

How to use the table maintenance events for validating the input entries..?

Hi,
I have created a Z table with 6 fields in which all are KEY fields. All are of CHAR type. I have created the Table Maintenance Generator for the same. While maintaining the entries in the table, even though I maintain a blank entry for a field it is saving the entry. But, I don't want that way. All the fields are mandatory in my table. One should enter all the fields. Otherwise it should not allow to save the entry. So, I think it can be done using the Table Maintenance Events. can someone tell me how to use the Table Maintenance Events. and which event to use for my reuqirement and what is the logic to be written.
Or Is there any other way to solve my problem.
Please share your inputs. Thanks in advance.
Best regards,
paddu.

In the table maintenance generator, Environment --> Modifications --> Events then a screen will be appear here,we need to create the Events.In the EVENTS screen, press new Entries, there give 01(Before Saving the Data in the Database) and give a name(This will become a PERFORM), then click the Editor pushbutton, this will be there at the right side of the entry, then a popup will be appear, you can create an include program, there inside of the include program write ur code.
Here is documentation for Event 01(Before Saving the Data in the Database )
Event 01: Before Saving the Data in the Database
Use
This event occurs before new, changed or deleted entries are written to the database. Other activities can be performed, for example:
hidden entry processing
fill hidden fields
flag data to be written to hidden tables after the database change.
To have the changes saved by the central maintenance dialog routines, SY-SUBRC must be set to 0 at the end of the routine.
Realization
This event has no standard routine. The following global data is available for the realization of the user routine:
internal table TOTAL
field symbols
field symbols <ACTION> and <ACTION_TEXT>
<STATUS>-UPD_FLAG
If internal table data are to be changed before saving, t he changes should be made in both the internal table TOTAL and in the internal table EXTRACT.
FORM abc.
DATA: F_INDEX LIKE SY-TABIX. "Index to note the lines found
LOOP AT TOTAL.
IF <ACTION> = desired constant.
READ TABLE EXTRACT WITH KEY <vim_xtotal_key>.
IF SY-SUBRC EQ 0.
F_INDEX = SY-TABIX.
ELSE.
CLEAR F_INDX.
ENDIF.
(make desired changes to the line TOTAL)
MODIFY TOTAL.
CHECK F_INDX GT 0.
EXTRACT = TOTAL.
MODIFY EXTRACT INDEX F_INDX.
ENDIF.
ENDLOOP.
SY-SUBRC = 0.
ENDFORM.
Regards,
Joy.

Need to know the table for sales org and sales area of role Sold-to in CRM

Dear Sir,
Our server is CRM 5.0, I would like to download the data from CRM , however, I would like to know the table name which keep the sales org and sales area of role Sold-to in T-code : BP . However, we can't find the actualty table.
Please kindly advise.
Thank you
Lek

Hi Vimol,
You can get Org details in various tables like Sales Org, Division, Distribution Channel in following tables with help of PARTNER_GUID.
Sales :
CRMM_BUT_LNK0010
CRMM_BUT_LNK0011
Shipping:
CRMM_BUT_LNK0020
CRMM_BUT_LNK0021
Billing :
CRMM_BUT_LNK0030
CRMM_BUT_LNK0031
Organization :
CRMM_BUT_LNK0140
CRMM_BUT_LNK0141
I think, for you Organization related table CRMM_BUT_LNK0141 would be useful.
From this table you will get Sales Org, Division, Distribution Channel.
And in order to get Sales Office of BP, you will get it from table CRMM_BUT_SET0140 where you can put set_guid fetched from CRMM_BUT_LNK0141
Hope this helps....Please reward points if useful.
Regards,
Shailesh Jadhav

How to view the table at the application level

Dear All,
How to view the table in the Data Dictionary at the application level, If a table is created at the database level by using CREATE statement.
code/
create table zmard as select * from sapone.mard where 1 = 2
/code
I would like to view the table above, which is created at the Oracle database level in the Data Dictionary.
can anyone guess the solution.
Best wishes
Mahesh

Hi
U should create a program using SQL native in order to select and show the data.
By SE11 or directly in the program u can define a structure like your table:
DATA: BEGIN OF W_ZMARD,
              FIELD,
          END     OF W_ZMARD.
EXEC.
   OPEN CURSO FOR SELECT * FROM ZMARD
ENDEXEC.
DO.
EXEC.
     FETCH NEXT CURSOR INTO :W_ZMARD
ENDEXEC.
IF SY-SUBRC <> 0.
     EXIT.
ENDIF.
WRITE: / W_ZMARD-FIELD,
ENDDO.
EXEC.
CLOSE CURSOR
ENDEXEC.
I don't know if it's possible to create a view in SE11, because it's needs a table just defined in SE11, u can create a new view ZMARD based on MARD but I don't believe it'll use your table.
Max

How to make the 'TABLE' ui element to stretch to a determined height?

Hi, dear all:
I have one problem, i don't know how to resolve it. Can anybody help me, thanks in advance.
The requirement is :
In the View, i have 2 UI elements, one table and one Format-text.
The "TABLE" will be used to display the records of one DB which has 100 records in total. The "Format-Text" will be used to display some comment which is determined before. "TABLE" is placed above of the "Format-Text".
Take it simple, i provide the height of the "Format-Text" UI element is 100px.
Okay. Now, we need the height of our webdynpro should be stretched to 100% vertically of our monitor. That is too say:
      (1). If the height of our monitor is '500px', the "TABLE" ui element should be streched to 400px vertically (500px - 100px)
             If the 400px can not hold the '100 rows', then the 'TABLE' can be scrolled.
      (2). If the height of our monitor is '1000px', the "TABLE" ui element should be streched to 900px vertically (1000px - 100px)
             If the 900px is higher than "100 rows", then the left height should be placed with 'Empty rows' of table.
Can anybody be familiar with these requirement?
Please help me, thanks very very much!
Best wishes.

Ya..Thanks very much for your reply...
It seems one good solution, especially for the "2nd case" (if the height of total records of DB is larger than the height of the table UI element , now we can use one "Scrollable transparent container " to encapsule the "Table UI element" ). Ya, you also mentioned that : it will bring the adverse reaction that i will loose the "Header" of "Table" while scrolling. Thanks for your consideration of the dimensions of this problem.
However, About the the "1st case"(If the height of total records of DB is short than the height of the table UI element..). I should add "Empty rows" to the "Table" dynamically, even i also can not know how many rows should i add...
first i can measure the height of the "Monitor"; Second i cannot know the height of "one row" of "Table".
These are really disaster, blizzard...
Thanks very much for your kindly suggestion.
And can you also do me a favor to check the following another problem?Thanks hospitable expert.
How to integrate 2 windows or applications in WD4A?
Thanks & Regards.

How to capture the table update

How to capture the table update.Suppose I delete a enrtry from the table or mofying any entry in a table is there way to capture that update in SAP?

hi ,
follow these steps:
1. After you selecte the search help for New Responislbe person, domodify gets triggered.
2. In the wddomodify, get the value of New Responsible person by reading the attribute binded to it.
3. Now if Value entered is not initial, write a selecte query to fetch the name based on pernr no.
4. Finally bind the name fetched with the attribute binded to New Responsible person name.
Wdomodify :
************* *Read the New REsponsible person Pernr* ***********
DATA lo_nd_cn_sflight TYPE REF TO if_wd_context_node.
DATA lo_el_cn_sflight TYPE REF TO if_wd_context_element.
DATA ls_cn_sflight TYPE wd_this->element_cn_sflight.
DATA lv_carrid LIKE ls_cn_sflight-carrid.
* navigate from <CONTEXT> to <CN_SFLIGHT> via lead selection
lo_nd_cn_sflight = wd_context->get_child_node( name = wd_this->wdctx_cn_sflight ).
* get element via lead selection
lo_el_cn_sflight = lo_nd_cn_sflight->get_element( ).
* get single attribute
lo_el_cn_sflight->get_attribute(
    EXPORTING
      name = `PERNR`
    IMPORTING
      value = lv_carrid ).
****** *Check whethre a value has been entered in PERNR* *************
if lv_carrid is not initial.
*************Select Name based on pernr entered* ***********
select ename from pa001 into lv_ename where pernr = lv_carrid.
*******Set the Name atttribute with the ename value fetched* *****
lo_el_cn_sflight->set_attribute(
      name = `NAME`
      value = lv_cename ).
endif.

Please help me to know the tables which contain details of APD and Open hub destination

Hi experts,
I need to know the list of APDs that have been created in our system. So can you please let me know the table name (if there is any) which contains the name of the APD and as well as the status (active / inactive) of the APD.
Thanks ,
Shalini

Hi Shalini,
Go to RSANWB T-code and select any analysis process. Then press the "monitor" button. On the monitor screen, you can see the selection criteria in a table on the right. Now double-click on the table and a popup will come up where you can set the selection criteria. in particular, you can set the time frame and the analysis process selection.
Hope it 'll help you..........
Regards,
Mukesh

How to know the table name of an InfoCub if we know cube technical name?

Similar Messages

Maybe you are looking for