How to migrate from ascii to unicode (MaxDB 7.5)? loadercli: ERR -25347

Hi,
I use MaxDB 7.5.00.26. (Ok, I know that I should switch to 7.6, however, it is not possilble for some customer restriction for now, but should be possible quite soon).
We'd like to migrate a db from ascii to unicode. Based on the infos in the thread "Error at copying database using dumps via loadercli: error -25364" I tried the following:
Export sourcedb
1. Export catalog and data
C:\> loadercli -d db_asc -u dba,dba
loadercli> export db catalog outstream file 'C:\tmp1\20080702a_dbAsc.catalog' ddl
OK
loadercli> export db data outstream file 'C:\tmp1\20080702b_dbAsc.data' pages
OK
loadercli> exit
Import targetdb
1. Create a new empty DB with '_UNICODE=yes'
2. Set 'columncompression' to 'no'
C:\> dbmcli -d db_uni -u dba,dba param_directput columncompression no
ERR
-24979,ERR_XPNOTFOUND: parameter not found
Couldn't find this parameter e.g. in dbmgui (parameters general, extended and support)
3. Import catalog and data
C:\> loadercli -d db_uni -u dba,dba
loadercli> import db catalog instream file 'C:\tmp1\20080702a_dbAsc.catalog' ddl
OK
loadercli> import db data instream file 'C:\tmp1\20080702b_dbAsc.data' pages
ERR -25347
Encoding type of source and target database do not match: source = ASCII, target
= UNICODE.
loadercli> exit
What is wrong? Is a migration from ascii to unicode to be done somehow else?
Can I migrate a db from 7.5.00.26 to 7.6.03.15 in the same way or should it be done in another way.
It would be greate if you point me to a post etc. where these two migrations are explained in detail.
Thanks in advance - kind regards
Michael

Hi,
I can neither find "USEUNICODECOLUMNCOMPRESSION" nor "COLUMNCOMPRESSION". Could it be that there do exist from MaxDB version 7.6 on and not in 7.5?
Kind regards,
Michael
The complete parameter list (created by "dbmcli -d db_uni -u dbm,dbm param_directgetall > maxdb_params.txt") is:
OK
KERNELVERSION                         KERNEL    7.5.0    BUILD 026-123-094-430
INSTANCE_TYPE                         OLTP
MCOD                                  NO
RESTART_SHUTDOWN                      MANUAL
_SERVERDB_FOR_SAP                     YES
_UNICODE                              YES
DEFAULT_CODE                          ASCII
DATE_TIME_FORMAT                      INTERNAL
CONTROLUSERID                         DBM
CONTROLPASSWORD                       
MAXLOGVOLUMES                         2
MAXDATAVOLUMES                        11
LOG_VOLUME_NAME_001                   LOG_001
LOG_VOLUME_TYPE_001                   F
LOG_VOLUME_SIZE_001                   131072
DATA_VOLUME_NAME_0001                 DAT_0001
DATA_VOLUME_TYPE_0001                 F
DATA_VOLUME_SIZE_0001                 262144
DATA_VOLUME_MODE_0001                 NORMAL
DATA_VOLUME_GROUPS                    1
LOG_BACKUP_TO_PIPE                    NO
MAXBACKUPDEVS                         2
BACKUP_BLOCK_CNT                      8
LOG_MIRRORED                          NO
MAXVOLUMES                            14
_MULT_IO_BLOCK_CNT                    4
_DELAY_LOGWRITER                      0
LOG_IO_QUEUE                          50
_RESTART_TIME                         600
MAXCPU                                1
MAXUSERTASKS                          50
_TRANS_RGNS                           8
_TAB_RGNS                             8
_OMS_REGIONS                          0
_OMS_RGNS                             25
OMS_HEAP_LIMIT                        0
OMS_HEAP_COUNT                        1
OMS_HEAP_BLOCKSIZE                    10000
OMS_HEAP_THRESHOLD                    100
OMS_VERS_THRESHOLD                    2097152
HEAP_CHECK_LEVEL                      0
_ROW_RGNS                             8
_MIN_SERVER_DESC                      16
MAXSERVERTASKS                        21
_MAXTRANS                             292
MAXLOCKS                              2920
_LOCK_SUPPLY_BLOCK                    100
DEADLOCK_DETECTION                    4
SESSION_TIMEOUT                       900
OMS_STREAM_TIMEOUT                    30
REQUEST_TIMEOUT                       5000
_USE_ASYNC_IO                         YES
_IOPROCS_PER_DEV                      1
_IOPROCS_FOR_PRIO                     1
_USE_IOPROCS_ONLY                     NO
_IOPROCS_SWITCH                       2
LRU_FOR_SCAN                          NO
_PAGE_SIZE                            8192
_PACKET_SIZE                          36864
_MINREPLY_SIZE                        4096
_MBLOCK_DATA_SIZE                     32768
_MBLOCK_QUAL_SIZE                     16384
_MBLOCK_STACK_SIZE                    16384
_MBLOCK_STRAT_SIZE                    8192
_WORKSTACK_SIZE                       8192
_WORKDATA_SIZE                        8192
_CAT_CACHE_MINSIZE                    262144
CAT_CACHE_SUPPLY                      3264
INIT_ALLOCATORSIZE                    221184
ALLOW_MULTIPLE_SERVERTASK_UKTS        NO
_TASKCLUSTER_01                       tw;al;ut;2000*sv,100*bup;10*ev,10*gc;
_TASKCLUSTER_02                       ti,100*dw;30000*us;
_TASKCLUSTER_03                       compress
_MP_RGN_QUEUE                         YES
_MP_RGN_DIRTY_READ                    NO
_MP_RGN_BUSY_WAIT                     NO
_MP_DISP_LOOPS                        1
_MP_DISP_PRIO                         NO
XP_MP_RGN_LOOP                        0
MP_RGN_LOOP                           0
_MP_RGN_PRIO                          NO
MAXRGN_REQUEST                        300
_PRIO_BASE_U2U                        100
_PRIO_BASE_IOC                        80
_PRIO_BASE_RAV                        80
_PRIO_BASE_REX                        40
_PRIO_BASE_COM                        10
_PRIO_FACTOR                          80
_DELAY_COMMIT                         NO
_SVP_1_CONV_FLUSH                     NO
_MAXGARBAGE_COLL                      0
_MAXTASK_STACK                        1024
MAX_SERVERTASK_STACK                  100
MAX_SPECIALTASK_STACK                 100
_DW_IO_AREA_SIZE                      50
_DW_IO_AREA_FLUSH                     50
FBM_VOLUME_COMPRESSION                50
FBM_VOLUME_BALANCE                    10
_FBM_LOW_IO_RATE                      10
CACHE_SIZE                            10000
_DW_LRU_TAIL_FLUSH                    25
XP_DATA_CACHE_RGNS                    0
_DATA_CACHE_RGNS                      8
XP_CONVERTER_REGIONS                  0
CONVERTER_REGIONS                     8
XP_MAXPAGER                           0
MAXPAGER                              11
SEQUENCE_CACHE                        1
_IDXFILE_LIST_SIZE                    2048
_SERVER_DESC_CACHE                    74
_SERVER_CMD_CACHE                     22
VOLUMENO_BIT_COUNT                    8
OPTIM_MAX_MERGE                       500
OPTIM_INV_ONLY                        YES
OPTIM_CACHE                           NO
OPTIM_JOIN_FETCH                      0
JOIN_SEARCH_LEVEL                     0
JOIN_MAXTAB_LEVEL4                    16
JOIN_MAXTAB_LEVEL9                    5
_READAHEAD_BLOBS                      25
RUNDIRECTORY                          E:\_mp\u_v_dbs\EVERW_T3
_KERNELDIAGFILE                       knldiag
KERNELDIAGSIZE                        800
_EVENTFILE                            knldiag.evt
_EVENTSIZE                            0
_MAXEVENTTASKS                        1
_MAXEVENTS                            100
_KERNELTRACEFILE                      knltrace
TRACE_PAGES_TI                        2
TRACE_PAGES_GC                        0
TRACE_PAGES_LW                        5
TRACE_PAGES_PG                        3
TRACE_PAGES_US                        10
TRACE_PAGES_UT                        5
TRACE_PAGES_SV                        5
TRACE_PAGES_EV                        2
TRACE_PAGES_BUP                       0
KERNELTRACESIZE                       653
EXTERNAL_DUMP_REQUEST                 NO
_AK_DUMP_ALLOWED                      YES
_KERNELDUMPFILE                       knldump
_RTEDUMPFILE                          rtedump
_UTILITY_PROTFILE                     dbm.utl
UTILITY_PROTSIZE                      100
_BACKUP_HISTFILE                      dbm.knl
_BACKUP_MED_DEF                       dbm.mdf
_MAX_MESSAGE_FILES                    0
_EVENT_ALIVE_CYCLE                    0
_SHAREDDYNDATA                        10280
_SHAREDDYNPOOL                        3658
USE_MEM_ENHANCE                       NO
MEM_ENHANCE_LIMIT                     0
__PARAM_CHANGED___                    0
__PARAM_VERIFIED__                    2008-07-02 21:10:19
DIAG_HISTORY_NUM                      2
DIAG_HISTORY_PATH                     E:\_mp\u_v_dbs\EVERW_T3\DIAGHISTORY
_DIAG_SEM                             1
SHOW_MAX_STACK_USE                    NO
LOG_SEGMENT_SIZE                      43690
SUPPRESS_CORE                         YES
FORMATTING_MODE                       PARALLEL
FORMAT_DATAVOLUME                     YES
HIRES_TIMER_TYPE                      CPU
LOAD_BALANCING_CHK                    0
LOAD_BALANCING_DIF                    10
LOAD_BALANCING_EQ                     5
HS_STORAGE_DLL                        libhsscopy
HS_SYNC_INTERVAL                      50
USE_OPEN_DIRECT                       NO
SYMBOL_DEMANGLING                     NO
EXPAND_COM_TRACE                      NO
OPTIMIZE_OPERATOR_JOIN_COSTFUNC       YES
OPTIMIZE_JOIN_PARALLEL_SERVERS        0
OPTIMIZE_JOIN_OPERATOR_SORT           YES
OPTIMIZE_JOIN_OUTER                   YES
JOIN_OPERATOR_IMPLEMENTATION          YES
JOIN_TABLEBUFFER                      128
OPTIMIZE_FETCH_REVERSE                YES
SET_VOLUME_LOCK                       YES
SHAREDSQL                             NO
SHAREDSQL_EXPECTEDSTATEMENTCOUNT      1500
SHAREDSQL_COMMANDCACHESIZE            32768
MEMORY_ALLOCATION_LIMIT               0
USE_SYSTEM_PAGE_CACHE                 YES
USE_COROUTINES                        YES
MIN_RETENTION_TIME                    60
MAX_RETENTION_TIME                    480
MAX_SINGLE_HASHTABLE_SIZE             512
MAX_HASHTABLE_MEMORY                  5120
HASHED_RESULTSET                      NO
HASHED_RESULTSET_CACHESIZE            262144
AUTO_RECREATE_BAD_INDEXES             NO
LOCAL_REDO_LOG_BUFFER_SIZE            0
FORBID_LOAD_BALANCING                 NO

Similar Messages

  • HT1444 how to migrate from yosemite beta to full vesion

    Hi
    how to migrate from yosemite beta to full vesion

    When I look in "about this mac" - it says Yosemite 10.10. Do I really need to download it again?
    I found on a blog that someone contacted the Apple service:
    “simply install the final version of the software you are testing when it appears in Software Update” – that means the final version of the beta software you are given to test is what will be made public. So we’re on the same build as what is now in the App Store.
    My compute OSX is 10.10 but build is (14A388b) while some say that app store version is (build 14A389).
    Does it really make a difference? If I don't download it will it continue to update?

  • How to migrate from exchange 2007 to 2013 step by step tutorials please

    Hi
    I am running Windows Server 2008 standard, with exchange 2007 SP2 on it.
    We have 800 mailbox in total
    Our domain controllers are
     Win2012 R2 and I would like to upgrade to Exchange 2013 on Windows server 2012 R2.
    I am running a VM, on VMware environment, so my Windows 2012 R2 is a VM.
    Is there a website or document that explains in detail, step by step how to upgrade from 2007 to 2013.
    I currently only have 1 exchange server 2007, with all the roles on the one server.  I would like to keep that same as
    well with exchange 2013.
    Thanks

    Exchange server deployment assistant is always a good service provider to achieve this task as it simply ask few questions about your current environment and proceed further accordingly.
    You can refer to this blog explained by technet team that will assist you further to gather more information in depth : http://blogs.technet.com/b/meamcs/archive/2013/07/25/part-1-step-by-step-exchange-2007-to-2013-migration.aspx
    Moreover, to avoid the interruptions and proceed a hassle-free migration from exchange 2007 to 2013, this application (http://www.exchangemigrationtool.com/) could also be a good approach to accomplish
    migration task in more secure way.

  • How to Migrate from SAP BO XI 3.1 system to SAP BI 4.1

    Hello Gurus,
    I got a new project and I have to start Upgrade and Migration from BO XIR3.1 to BI 4.1. Please help me out here. More detail are given below. Appreciated in advance.
    1.1    Technical Scope
    Installation of only a production SAP BI 4.1 environment.
    Repository is currently on DB2 but will be on SQL Server for the BI 4.1 implementation.
    All VMware machines: The new architecture calls for 12 VM servers.
    Row-level Security in the universe for authorization of content and Enterprise for Authentication (no SSO). Matrix security model with custom level groups which gives Basic, Intermediate, and Advanced level users to pre-defined folders and content.
    Migrate content (objects, universe and instances) from SAP BO XI 3.1 to SAP BO BI 4.1 for the technical upgrade, the details are below:
    Universes will stay in the UNV format and will not be converted to UNX.
    Only WebI Documents
    All Controlled Folders - (~5600 documents)
    174 Total objects in Public Documents folders (All documents to upgrade & remediate)
    5,433 Total WebI reports in Corporate and other folders (All documents to upgrade, & remediate)
    User Folders – (~6,000 documents)
    6000 + Webi documents accessed in 2013 ( All 6000 + documents to upgrade, NO remediation)
    Inbox – None will migrate
    Total Documents to remediate: up to 5,607
    Migrate all universes and connections
    Migrate all Xcelsius and agnostic documents with no remediation.
    The estimated report count for remediation by complexity, Low-1525, Medium-150 and High-50.
    Assumes a 10% report remediation effort described earlier sections
    Report remediation: should it exceed the base assumptions made in this document, will be implemented as a Change Order. Effort for such change will be mutually agreed between parties. Price to project is determined using this effort and blended rates.
    Testing:
    Conduct planning and inventory analysis; Reusable templates for Migration Plan, Validation.
    Perform migration
    Use the Right Sized Testing framework to plan and conduct testing
    Use the automated Reports Compare tools to compare large volumes of excel / xml data
    Templates based remediation– ensures quality control
    Thanking you best regards.
    AK.
    Message was edited by: Simone Caneparo
    reduced title length

    Hello Mark,
    Thanks for your help. Appreciated.
    Do you know or some one know, how to create at report for Audit purpose of BO 3.1 Universes's Connection, Database type, Network Layer and so on... I want to pull all info in to Webi report which are you seeing in the pictures.
    Please see the attached file.

  • How to migrate from a standard store setup in a splitted store (msg - idx) setup

    How can I migrate from a standard store setup in a splitted setup described in
    https://wikis.oracle.com/display/CommSuite/Best+Practices+for+Messaging+Server+and+ZFS
    can a 'reconstruct' run do the migration or have I do a
    imsbackup - imsrestore ?

    If your new setup would use the same filesystem layout as the old one (i.e. directory paths to the files would be the same when your migration is complete) you can just copy the existing store into the new structure, rename the old store directory into some other name, and mount the new hierarchy instead of it (zfs set mountpoint=...). The CommSuite Wiki also includes pages on more complex migrations, such as splitting the user populace into several stores (on different storage) and/or separate mailhosts. That generally requires that you lock the user in LDAP (perhaps deferring his incoming mail for later processing into the new location), migrate his mailbox, rewrite the pointers from LDAP, reenable account. The devil is in the details, for both methods. For the latter, see Wiki; for the former I'll elaborate a bit here
    1) To avoid any surprises, you should stop the messaging services before making the filesystem switch, finalize the data migration (probably with prepared data already mostly correct in the new hierarchy before you shut down the server, just resync'ing the recent changes into new structure), make the switch and reenable the server. If this is a lightly-used server which can tolerate some downtime - good for you If it is a production server, you should schedule some time when it is not very used so you can shut it down, and try to be fast - so perhaps practice on a test system or a clone first.
    I'd strongly recommend taking this adventure in small reversible steps, using snapshots and backups, and renaming old files and directories instead of removing them - until you're sure it all works, at least.
    2) If your current setup already includes a message store on ZFS, and it is large enough for size to be a problem, you can save some time and space by tricks that lead to direct re-use of existing files as if they are the dataset with a prepopulated message store.
    * If this is a single dataset with lots of irrelevant data (i.e. one dataset for the messaging local zone root with everything in it, from OS to mailboxes) you can try zfs-cloning a snapshot of the existing filesystem and moving the message files to that clone's root (eradicating all irrelevant directories and files on the clone). Likewise, you'd remove the mailbox files on the original system (when the time is right, and after sync-ing).
    * If this is already a dedicated store dataset which contains the directories like dbdata/    mboxlist/  partition/ session/   and which you want to split further to store just some files (indices, databases) separately, you might find it easier to just make new filesystem datasets with proper recordsizes and relocate these files there, and move the partition/primary to the remaining dataset's root, as above. In our setups, the other directories only take up a few megabytes and are not worth the hassle of cloning - which you can also do for larger setups (i.e. make 4 clones and make different data at each one's root). Either way, when you're done, you can and should make sure that these datasets can mount properly into the hierarchy, yielding the pathnames you need.
    3) You might also look into separating the various log-file directories into datasets, perhaps with gzip-9 compression. In fact, to reduce needed IOPS and disk space at expense of available CPU-time, you might use lightweight compression (lzjb) on all messaging data, and gzip on WORM data sets - local zone, but not global OS, roots; logs; etc. Structured databases might better be left without compression, especially if you use reduced record sizes - they might just not compress enough to make a difference, just burning CPU cycles. Though you could look into "zle" compression which would eliminate strings of null bytes only - there's lots of these in fresh database files.
    4) If you need to recompress the data as suggested in point (3), or if you migrate from some other storage to ZFS, rsync may be your friend (at least, if your systems don't rely on ZFS/NFSv4 ACLs - in that case you're limited to Solaris tar or cpio, or perhaps to very recent rsync versions which claim ACL support). Namely, I'd suggest "rsync -acvPHK --delete-after $SRC/ $DST/" with maybe some more flags added for your needs. This would retain the hardlink structure which Messaging server uses a lot, and with "-c" it verifies file contents to make sure you've copied everything over (i.e. if a file changes without touching the timestamp).
    Also, if you were busy preparing the new data hierarchy with a running server, you'd need to rsync old data to new while the services are down. Note that reading and comparing the two structures can take considerable time - translating to downtime for the services.
    Note that if you migrate from ZFS to ZFS (splitting as described in (2)), you might benefit from "zfs diff" if your ZFS version supports it - this *should* report all ofjects that changes since the named snapshot, and you can try to parse and feed this to rsync or some other migration tool.
    Hope this helps and you don't nuke your system,
    //Jim Klimov

  • How to migrate from Oracle 7.3.2 to Oracle 9i (SE)?

    Hi there,
    Can I have some advise on the migration of Oracle Database
    version 7.3.2 to Oracle 9i (SE)?
    How do I do that? Any document?
    Thanks in advance.
    Reagrds,
    Jacky

    I don't have any documents, but this would be my "best guess".
    1) patch from 7.3.2 to 7.3.4 (Oracle 8i upgrade I believe only
    supports oracle 7.3.4 upwards)
    2) Migrate from 7.3.4 to 8.1.7
    3) Migrate from 8.1.7 to 9.0.X
    I'm not sure what paths the 9i migration path supports, but I'd
    doubt they go back to Oracle 7

  • How to migrate from oracle forms 6i....

    Hi......
    i'm currently using Forms 6i having abt 150 forms nad 2oo reports, now i want to migrate all my forms and reports to oracle 10g/11i.
    Which will be the better option to migrate 10g/11i???
    which will be easier to migrate 10g/11i ??
    Is there any complication in migrating from 6i to 10g/11i??
    Will there be any dataloss if i migrate ??
    can i install oracle forms and reports 6i ,10g and 11i in single system ??
    thanks in Advance,
    Regards,
    santosh.Minupurey

    Are you currently deployed on the web or as c/s. Generally speaking for upgrading Forms its a case of open in the builder, regenerate and run. For c/s to web there may be some extra steps to do but generally speaking most Forms will run out of the box.
    CHeck out otn.oracle.com/formsupgrade
    There is also a batch option to help you and there are of course Oracle partners who can help as well.
    Regards
    Grant

  • How to migrate from sql server to oracle

    Hi ,
    My requirement is we are planning to migrate the sql server data to oracle.
    what is the way to do migration from sql server to oracle. Please let me know if any tools are there for migration.Previous we used sql developer( which is provided by oracle i.e. freeware )
    tool but it was created only table structures not ported any data.

    Hi,
    Oracle sql developer is a great tool for migration from sql server to oracle..
    Refer the link,
    http://www.oracle.com/technetwork/database/migration/sqlserver-095136.html

  • How to map from cid to unicode

    Hello.
    I'm now trying to convert cid to unicode by using the toUnicode cmap.
    The toUnicode cmap I extracted is as follows:
    /CIDInit /ProcSet findresource begin
    12 dict begin
    begincmap
    /CIDSystemInfo
    << /Registry (Adobe)
    /Ordering (UCS) /Supplement 0 >> def
    /CMapName /Adobe-Identity-UCS def
    /CMapType 2 def
    1 begincodespacerange
    <0000> <FFFF>
    endcodespacerange
    35 beginbfchar
    <0F3B> <7528>
    <0CA1> <8AAD>
    <0F62> <5229>
    <034B> <3042>
    <034D> <3044>
    <0358> <304F>
    <027B> <3002>
    <027C> <FF0C>
    <035D> <3054>
    <035E> <3055>
    <0360> <3057>
    <0369> <3060>
    <0370> <3067>
    <0372> <3069>
    <0373> <306A>
    <0294> <30FC>
    <0374> <306B>
    <0378> <306F>
    <0388> <307F>
    <0394> <308B>
    <03A5> <30A9>
    <02CE> <FF0A>
    <03AF> <30B3>
    <03B5> <30B9>
    <03B9> <30BD>
    <03BB> <30BF>
    <03BF> <30C3>
    <03C4> <30C8>
    <03CD> <30D1>
    <03D1> <30D5>
    <03D2> <30D6>
    <03DA> <30DE>
    <03E8> <30EC>
    <03EF> <30F3>
    <08BC> <8A66>
    endbfchar
    endcmap CMapName currentdict /CMap defineresource pop end end
    I think that the mapping process needs "beginbfrange" and "endbfrange."
    But, the above cmap does not include them.
    There should be a way to map from cid to unicode, because the Preview(Mac application) can search the same text.
    Please let me know my lack of understanding on toUnicode cmap.

    You might want to lookup ToUnicode maps in the standard. ISO 32000-1:2008 says in section 9.10.3 "ToUnicode CMaps":
    The CMap defined in the ToUnicode entry of the font dictionary shall follow the syntax for CMaps introduced in 9.7.5, "CMaps" and fully documented in Adobe Technical Note #5014, Adobe CMap and CIDFont Files Specification. Additional guidance regarding the CMap defined in this entry is provided in Adobe Technical Note #5411, ToUnicode Mapping File Tutorial. This CMap differs from an ordinary one in these ways:
    The only pertinent entry in the CMap stream dictionary (see Table 120) is UseCMap, which may be used if the CMap is based on another ToUnicode CMap.
    The CMap file shall contain begincodespacerange and endcodespacerange operators that are consistent with the encoding that the font uses. In particular, for a simple font, the codespace shall be one byte long.
    It shall use the beginbfchar, endbfchar, beginbfrange, and endbfrange operators to define the mapping from character codes to Unicode character sequences expressed in UTF-16BE encoding.

  • How to migrating from Business Objects to OBIEE

    Hi,
    I have one query is it possible migrating from Business objects to OBIEE ? if, yes could you tell me any one regarding this requirement.
    Advance Thanks.

    Hi,
    I don't have any documentation link , we need to design rpd based on BO Universe and BO reports functionality.
    first observe what are the physical tables used in universe those physical tables improted into physical layer of obiee rpd give physical joins. In BMM layer design hierarchies, calculations and outerjoins all these things done in BMM layer thats it.
    Regards,
    Naresh

  • How to :Migration from existing 595 into new 595 in RAC?

    Hi all,
    This is the bit complicated task for me(i.e) first let me explain our environment
    We are having 595 two instances (RAC) and 8300 is our storage due to the position we are not able to enhance the memory and CPU in this existing 595 Server.So what we are planning to make another 595 servers with some high configuration?
    Since this is new area for me dont know any idea of how to migrate these into new 595 Servers.
    fy.i storage will not get any change it will be as it is.
    I need any docs or anyone pls share their ideas and steps how they did(suppose if anyone did this already)
    Waiting For your reply.
    Thanks & Regards
    M.Murali..

    If your objective is to replace the exiting 595's with new one's then follow the steps below :-
    1. configure both the new servers (595) for RAC installation - follow the pre-install steps required for installing clusterware etc. e.g. storage, network, ssh etc..
    2. add both the new servers as a "node3" and "node4" into the existing 2-node cluster - follow the "node add" procedure in the documentation
    3. turn-off the first 2 nodes on old servers (node1 and node2)
    4. test your application with only the nodes...
    5. remove the old nodes using "node delete" procedure given in the documentation
    reference - http://download.oracle.com/docs/cd/B19306_01/rac.102/b14197/adddelunix.htm#BEICADHD
    - Siba
    http://dbathoughts.blogspot.com

  • How to migrate  from R/3 4.6 Oracle 9.2 /HPux to SQL on NT platform

    Hello all:
    I am very new to SAP and need to know where to start with this project.
    We are migrating from HP/UX Oracle 9.2 database SAP R3 4.6c to NT based SQL server. After Migration we will be upgrading to ECC5 or 6.
    Can you please tell me where to start. If possibile please be as specific as you can.
    Regards,
    Kourosh

    Check <a href="https://websmp209.sap-ag.de/osdbmigration">OS-DB-Migration Site in SAP Service Marketplace</a>
    Here (Goto Media Library) you'll also find the actual <a href="https://websmp209.sap-ag.de/~sapidb/011000358700002608772002E.pdf">SAP OS/DB Migration Check Planning Guide</a>
    After checking out the ressources mentioned above you can't be more specific...

  • How to migrate from 3GS to 4GS

    I bought the new iPhone 4GS and it is scheduled to arrive tomorrow. I currently have the 3GS and I want to make sure I migrate properly to my new phone.
    Do I have to deauthorize the old iPhone before synching for the first time my 4GS?
    FYI, I have:
    1) Updated my iMac to the latest firmware 10.7.2
    2) Updated iTunes to the latest firmware 10.5
    3) I understand that the 4GS will arrive with IOS 5
    4) Done regular backups on my 3GS and will do the last one when my 4GS arrives
    I read that iTunes does take care of all the guess work... meaning, all I have to do is connect my new phone when arrives and, other than clicking on a few "accept", "yes", etc, nothing else needs to be done. Since I recently migrated from PC environment, I am a bit hesitant to believe that everything will be trouble free...
    Comments, instructions...?

    "...I've done this few times now..."
    Great; however, I thought I ask since *technically* no one has done this specific migration yet.
    I hope apple techs that have work on it chime in with some tips

  • How to migrate from Dbase Database to Oracle 11gRelease2 database

    Hi,
    I have a Dbase database and i need to migrate to Oracle 11g Release2 database.
    Please suggest as to how to proceed for the same.
    Thanks,
    Gaurav

    GauravJ wrote:
    Hi,
    I have a Dbase database and i need to migrate to Oracle 11g Release2 database.
    Please suggest as to how to proceed for the same.
    Thanks,
    Gauravhttp://search.cpan.org/dist/CAM-DBF/lib/CAM/DBF.pm
    PERL can access both DBs simultaneously.
    so all you have to do is write some custom code to SELECT from DBASE DB & INSERT into Oracle DB

  • How to migrate from SAP content server to OPENTEXT?

    We have been using SAP content server as our storage for archived data for years.
    Now we plan to start using OPENTEXT to admin our archived data.
    How can we use OPENTEXT together with existing SAP content server?
    My idea is to treat content server as any other media as as DVD, WORM, etc.
    However, I do not see that OPENTEXT can be configured to admin content server .
    If so, how to transfer whatever on the content server to IXOS?
    We are at Opentext 9.5.x
    Please share your experience. Thanks!

    hi,
    Please refere SNote 1043676.
    Also, need to understand the following,
    How to move an entire content repository from one content server to another
    Sometimes you may need to move a content repository - but not necessarily all the content repositories from one content server to another. This can be done without much drama. Here is a means that I've used in the past:
    Use report RSCMSEX to export the repository from the source content server.
    Create a repository of the same name on the target content server.
    Use Report RSCMSIM to import the repository into the target content server.
    Delete the repository from the source content server (if desired!).
    The SAP progrm sapkprotp controls the import and export. The ABAP reports allow you to specify the RFC destinations where sapkrpotp runs.
    For lager repositories
    The programs  listed above cannot deal with the whole content repository at the same time. For a slower migration, try using the program RSIRPIRL. This approach allows you to do the migation on a live system.
    Create the new content repository on your new content server.
    Create the new content category.
    If using distribution, distribute the new documents to the new category. otherwise change redirected category for DMS_C1_ST
    Relocate using the program.
    benaakraja

Maybe you are looking for

  • Should i use display port or dvi?

    I've just purchased a NEC 232WMI display.  This is a 23" display with 1980 by 1020 resolutions, and has displayport, DVI and VGA inputs, as well as USB and audio.  It supports Displayport v1.1a. I've got a 2006 MacBook with mini-DVI output, and a mid

  • Open PDF files with lightning speeds !

    To open PDF files very fast do this: Go to Adobe Acrobat installation directory : eg: C:\Program Files\Adobe\Acrobat 7.0\Reader\ Cut everything from the "plug_ins" directory & paste it into the "Optional" one, this will stop all unnecessary plugins f

  • I have No Music on my iPhone 4S and my "Other" capacity is 6 gigs ... What is that and how can i get rid of it?

    Other is taking up 6 gigs of space

  • Customization of filter view in obiee 10g

    Hi, I have a report with chart view and filter view. We have some implicit filters in the report(static filters). Is it possible to hide the static filers and display only the selected prompt values(explicit filters/dynamic filters) in the filter vie

  • Losing session state after error page

    Hi there, I'm kinda new to all this so please bear with me. I've created a little app in HTML DB using the Oracle 10g XE database. The app is now in production and working ok. I do however have one issue that I am unable to resolve. The problem is th