How to mounted oracle database automatically in oracle version 8.1.7?

i want to know,how to mounted oracle database automatically in oracle version 8.1.7?

Does this mean you are not using the WIndows operating system, or you doi not want to do this 'manually' using some point and click method?
If this means, "do it automatically for reboots" and you are using the Windows OS, you need to set up a service and set it to automatic at reboot. Or, again in a Windows environment but at commnand line, use "net start {service name}" - as described in the manual.

Similar Messages

How to mount Oracle 11g software on Vmware.

Hello All,
I am new to this forum and also I am learning Oracle DBA 11G on my own to enhance my skills and move further.
I have a question for which I am looking an answer from the experts here in this forum.
Question: I have installed Vmware and Linux 4 on my system, please advise how can I now install the Oracle 11G software so that I can start with creation of Database?
Please respond to my query so that my interest into the subject remains intact and I can get a good start in it.
Thanks in advance.
Heyat Afroz.

955385 wrote:
Hello All,
I am new to this forum and also I am learning Oracle DBA 11G on my own to enhance my skills and move further.
I have a question for which I am looking an answer from the experts here in this forum.
Question: I have installed Vmware and Linux 4 on my system, please advise how can I now install the Oracle 11G software so that I can start with creation of Database?
Please respond to my query so that my interest into the subject remains intact and I can get a good start in it.
Thanks in advance.
Heyat Afroz.Probably what you are looking for is that you need to install the Guest Additions so that your vm can mount a directory from the host os. Then place your oracle installtion files on that share directory.

How to truncate / drop database automatic?

Using: 10gR2 and "imp" and "exp" for Import/Export.
Hi.
We have a problem. We have two databases. One to test/develope and one live database.
The test/developers one was created with a full dump after settin up the developer server.
Now we want to actualize the test/developer server with the live database.
The best way would be a normal import from a full dump file which overwrites all existing data.
Now we try it with "ignore=y" (it runs longer than 6h) and it seems to append all not existing data in the test/database from the full-dump (of the live server).
Is it the only way (to have a full clone) to drop/truncate the old DB and import than the data?
Can we automate the truncating/droping before import?
It would be to much work every time to delete the whole database, create it, create tablespaces, import the dump-file and so on.
What is the easiest way to do that?
Or is there no need to drop/truncate?
Thanks for your help!

The problem is, that importing the live database in the test system doesn´t update (because all tables, many rows, ... already exists) the database when ignore=n is set.
If we set ignore=y we get several of messages (and it runs up on 6h for a whole import), because many many rows exists (there are several foreign keys and constraints).
Then only the rest (newest) rows will append.
So if we want to import all new (fresh) from the live system (because direct overwriting does not work), we want to truncate/drop the database to get all fresh in (but does not recreate the whole database).
But I don´t know if there is a automaticated solution to truncate the whole database (and does not do it for each table by hand).
System privileges are not the problem, we have to import with sys as sysdba privileges.

How to find Oracle version

Hello friends,
I am new to sql. Can anyone let me know the query as to how we can find the version of the oracel installed on the system.
Thanks and Regards,
shekar.

select * from v$version;

Can't mount oracle database on linux system

This is same as previous posting just added
e-mail and username info fo forum posting.
I am not able to mount an Oracle database.
I am new to Oracle and am working on an Oracle8i installation on an
Intel Linux Suse 6.3 platform. I am using only one harddrive and am
not using the 4 mount points as mentioned for efficiecy purposes in
the Oracle documentation..I am using the installation cd from Oracle8i
for Linux Starter Kit by Oracle Press. If anyone has this book they
can refer to pages 41-44 for the examples I followed.
As sysdba in sqplplus using the STARTUP command I can not Mount the
database -step 2 of the 3 stage process (Start, Mount and Open the
database) of opening an Oracle database.
I show the errors I encountered when I did the first 2 of the 3 steps
in the step-by-step mode (STARTUP NOMOUNT pfile=, ALTER DATABASE
MOUNT) in the sqlplus session and alert log respectively with startup
nomount and alter database mount for this sqlplus session.
Additionally I show the init.ora file lines referring to control file
which seem to be referred to by the sqlplus error messages and the
alert.log file. Perhaps some can give me some advice as what I can try
to fix this problem.
At the end of this e-mail I added several questions I had in regard to the control
files. Any help is appreciated.
Well, here are the sqlplus session results and its alert.log file:
Oracle sqlplus session usr/oracle as sysdba
oracle@CHESTNUT:~ > sqlplus
SQL*Plus: Release 8.1.6.0.0 - Production on Mon Mar 19 20:47:49 2001
(c) Copyright 1999 Oracle Corporation. All rights reserved.
Enter user-name: usr/oracle as sysdba
Connected to an idle instance.
SQL> startup nomount pfile=/usr/oracle/dbs/init.ora ;
ORACLE instance started.
Total System Global Area 24989680 bytes
Fixed Size 69616 bytes
Variable Size 24637440 bytes
Database Buffers 204800 bytes
Redo Buffers 77824 bytes
SQL> alter database mount ;
alter database mount
ERROR at line 1:
ORA-00205: error in identifying controlfile, check alert log for more
info
SQL> shutdown immediate ;
ORA-01507: database not mounted
ORACLE instance shut down.
SQL> exit
Disconnected
oracle@CHESTNUT:~ >
alert.log file for above session
Mon Mar 19 20:48:38 2001
Starting ORACLE instance (normal)
LICENSE_MAX_SESSION = 0
LICENSE_SESSIONS_WARNING = 0
LICENSE_MAX_USERS = 0
Starting up ORACLE RDBMS Version: 8.1.6.1.0.
System parameters with non-default values:
processes = 50
shared_pool_size = 3500000
control_files = ora_control1, ora_control2
db_block_buffers = 100
log_buffer = 32768
log_checkpoint_interval = 10000
db_files = 80
db_file_multiblock_read_count= 8
global_names = TRUE
db_name = DEFAULT
parallel_max_servers = 5
max_dump_file_size = 10240
PMON started with pid=2
Load Indicator not supported by OS !
DBW0 started with pid=3
LGWR started with pid=4
CKPT started with pid=5
SMON started with pid=6
RECO started with pid=7
Mon Mar 19 20:48:58 2001
alter database mount
Mon Mar 19 20:48:58 2001
ORA-00202: controlfile: 'ora_control1'
ORA-27037: unable to obtain file status
Linux Error: 2: No such file or directory
Additional information: 3
Mon Mar 19 20:49:01 2001
ORA-205 signalled during: alter database mount
Mon Mar 19 20:49:12 2001
Shutting down instance (immediate)
License high water mark = 1
Mon Mar 19 20:49:12 2001
ALTER DATABASE CLOSE NORMAL
ORA-1507 signalled during: ALTER DATABASE CLOSE NORMAL...
archiving is disabled
init.ora control files
# define two control files by default
control_files = (ora_control1, ora_control2)
Here are my control file questions:
I need to know several points:
1) What are control files susposed to
contain and how would I recognize them?
I used the
unix find /usr/oracle \*ctl* -print
command to locate files with a ctl extension.
This resulted in about a dozen such files in
different directories as shown below:
./bin/lsnrctl
./bin/extractlib
./bin/agtctl
./bin/oidctl
./bin/lsnrctl0
./bin/agtctlO
./rdbms/demo/ulcase1.ctl
./rdbms/demo/ulcase10.ctl
./rdbms/demo/ulcase2.ctl
./rdbms/demo/ulcase3.ctl
./rdbms/demo/ulcase4.ctl
./rdbms/demo/ulcase5.ctl
./rdbms/demo/ulcase6.ctl
./rdbms/demo/ulcase7.ctl
./rdbms/demo/ulcase8.ctl
./rdbms/demo/ulcase9.ctl
./ldap/load/dn.ctl
./ldap/load/attr_store.ctl
./ord/ts/demo/tsquick/tsquick.ctl
./ord/ts/demo/usageutl/utildat.ctl
./ord/ts/demo/usage/stockdat.ctl
./ord/ts/demo/usage/stockinc.ctl
./ord/ts/demo/retrofit/sales.ctl
./ord/ts/demo/retrofit/sales2.ctl
./ord/ts/demo/applet/indexdemo.ctl
./javavm/admin/libjox8com_sun_jndi_ldap_ctl.so
./md/demo/examples/migctl.h
./md/demo/examples/migctl.c
2) On page 100 in the book Oracle 8i A Beginners's
by Oracle Press mention is made of a
CREATE CONTROLFILE command that can under
circumstances be used to re-create a control-file.
but that is all that is said about it. Perhaps
you might know something more about it.
3) Would you recommend any good text for
Oracle DBA's, especially for the problem of the sort
that I am encountering?
[email protected]
null

It's probably not supported on RHEL5/Centos5/etc., but...
You can get the installer to function using the following steps:
- extract the cal_linux_*.tar.gz, and cd into the OracleCalendar_inst directory
In there is the actual installer, cal_linux.
- the cal_linux is shell script wrapped around some binary blobs. The installer's
problem is that Oracle is setting the LD_ASSUME_KERNEL=2.2.5 environment
variable, which is a mistake on RHEL5. You need to make it not set that variable,
but you need to do so in a way that the size of the shell script does not change at all,
and none of the binary blobs are impacted.
- the approach I took was
mv cal_linux cal_linux.BAK
sed -e 's/LD_ASSUME_KERNEL=2.2.5/LD_ASSUME_KERNEL= /g' < cal_linux.BAK > cal_linux
chmod a+rx cal_linux
cal_linux -i gui
Note: you must have exactly 5 spaces in the substitution part of the sed command, because you're replacing 5 characters (2.2.5), and the size of the shell script must not change.
If you do that, the installer should run (one warning from awk still) and you should be able to install the product.
Tim

How to CREATE a DATABASE with ORACLE?

Hello
Can somebody please just tell me, how do i create a Database with Oracle 10g(Express Edition)? I find it very disturbing that not in one of the dozen Orcale books i have, they explain to you on how to create a DATABASE. They begin with how to create Table, can a table exist without a database?
I have tried the command line, but it tells me im not connected or some kind of error. I have tried SQL Commands and then it gives me this Error:*ORA-01501: CREATE DATABASE failed*
ORA-01100: database already mounted
How come Oracle dont have just a simple button:CREATE DATABASE?
Somebody please help!

Duplicate thread ?
Creating a DATABASE with ORACLE!
Srini

How to install oracle 9i database, 9i AS , 9i DS in a standalone system

hi,
can any one explain me the plan how to install oracle 9i database, 9i AS , 9i DS in a single standalone system. is it possible ?
if possible , can u suggest me how to plan these operations in detail.
thanks
N.RAM PRASAD

It's very easy to find. Please refer to this address: http://tinyurl.com/qmgk5v
Kamran Agayev A. (10g OCP)
http://kamranagayev.wordpress.com
[Step by Step install Oracle on Linux and Automate the installation using Shell Script |http://kamranagayev.wordpress.com/2009/05/01/step-by-step-installing-oracle-database-10g-release-2-on-linux-centos-and-automate-the-installation-using-linux-shell-script/]

How to install oracle 9i database on rhel4

Hi,
i am new to database and i have to install oracle database 9i on RHEL4.
can anybody give me the detail steps to do this.
Thanks in advance

Duplicate post!
Re: how to install oracle 9i database on rhel4
Refer to this address:
http://tinyurl.com/qmgk5v
Kamran Agayev A. (10g OCP)
http://kamranagayev.wordpress.com
[Step by Step install Oracle on Linux and Automate the installation using Shell Script |http://kamranagayev.wordpress.com/2009/05/01/step-by-step-installing-oracle-database-10g-release-2-on-linux-centos-and-automate-the-installation-using-linux-shell-script/]

How to backup Oracle Database Single Instance using RMAN

Folks,
Hello. I am using Oracle Database Server 11gR1 with Operating System Oracle Linux 5.10.
I understand how to backup database instance in SQL Server with Windows. But don't really understand how to backup database instance in Oracle with Linux.
I have done Cold backup and Hot backup for the database instance HRCS90 but both get the same error message.
Cold backup is below:
SQL> startup
ORACLE instance started.
Total System Global Area 538677248 bytes
Fixed Size                  2146024 bytes
Variable Size             528482584 bytes
Database Buffers            4194304 bytes
Redo Buffers                3854336 bytes
Database mounted.
Database opened.
SQL> shutdown immediate
Database closed.
Database dismounted.
ORACLE instance shut down.
RMAN> backup database;
Starting backup at 25-NOV-13
using target database control file instead of recovery catalog
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03002: failure of backup command at 11/25/2013 14:26:52
RMAN-06171: not connected to target database
RMAN> backup HRCS90
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-00558: error encountered while parsing input commands
RMAN-01009: syntax error: found "identifier": expecting one of: "archivelog, auxiliary, as, backup, backupset, blocks, channel, check, copy, copies, controlfilecopy, cumulative, current, database, datafile, datafilecopy, device, diskratio, db_recovery_file_dest, db_file_name_convert, duration, filesperset, for, format, from, full, force, file, incremental, keep, (, maxsetsize, nochecksum, noexclude, nokeep, not, proxy, pool, reuse, recovery, section, skip, spfile, skip readonly, setsize, tablespace, tag, to, validate"
RMAN-01008: the bad identifier was: HRCS90
RMAN-01007: at line 1 column 8 file: standard input
RMAN> backup database HRCS90
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-00558: error encountered while parsing input commands
RMAN-01009: syntax error: found "identifier": expecting one of: "archivelog, auxiliary, backup, backupset, channel, copy, controlfilecopy, current, database, datafile, datafilecopy, delete, diskratio, db_recovery_file_dest, filesperset, format, from, force, file, include, keep, (, maxsetsize, noexclude, nokeep, not, pool, plus, reuse, recovery, section, ;, skip, spfile, skip readonly, setsize, tablespace, tag, to"
RMAN-01008: the bad identifier was: HRCS90
RMAN-01007: at line 1 column 17 file: standard input
While the database instance HRCS90 is startup, I do hot backup using the same commands and get the same error message with above cold backup.
My question is:
Can any folk tell me the specific steps (command by command) to backup a single database instance in Oracle using RMAN ?
Thanks.

Folks,
Hello. Thanks a lot for replying. My database instance named HRCS90 is going to be backed up. My backup directory is /backup_Database_Instance_HRCS90.
If database in open state, we must back up in archive log. If database in mount state but not open, we can back up in noarchive log.
I have tried to back up HRCS90 in archive and noarchive log when database in mount state but not open as below:
SQL>startup mount;
SQL>exit
[user@linux bin]$./rman
RMAN>connect target;
RMAN> CONFIGURE CHANNEL DEVICE TYPE DISK FORMAT '/backup_Database_Instance_HRCS90/full_%u_%s_%p';
new RMAN configuration parameters:
CONFIGURE CHANNEL DEVICE TYPE DISK FORMAT   '/backup_Database_Instance_HRCS90/full_%u_%s_%p';
new RMAN configuration parameters are successfully stored
released channel: ORA_DISK_1
RMAN> CONFIGURE RETENTION POLICY TO RECOVERY WINDOW OF 360 DAYS;
new RMAN configuration parameters:
CONFIGURE RETENTION POLICY TO RECOVERY WINDOW OF 360 DAYS;
new RMAN configuration parameters are successfully stored
RMAN> backup as backupset database plus archivelog;
Starting backup at 01-DEC-13
allocated channel: ORA_DISK_1
channel ORA_DISK_1: SID=44 device type=DISK
specification does not match any archived log in the recovery catalog
backup cancelled because all files were skipped
Finished backup at 01-DEC-13
Starting backup at 01-DEC-13
using channel ORA_DISK_1
channel ORA_DISK_1: starting full datafile backup set
channel ORA_DISK_1: specifying datafile(s) in backup set
input datafile file number=00001 name=/u01/oradata/HRCS90/system01.dbf
input datafile file number=00090 name=/u01/oradata/HRCS90/psimage.dbf
input datafile file number=00060 name=/u01/oradata/HRCS90/gpapp.dbf
input datafile file number=00119 name=/u01/oradata/HRCS90/tlwork.dbf
input datafile file number=00102 name=/u01/oradata/HRCS90/pttlrg.dbf
input datafile file number=00054 name=/u01/oradata/HRCS90/faapp.dbf
input datafile file number=00110 name=/u01/oradata/HRCS90/saapp.dbf
input datafile file number=00101 name=/u01/oradata/HRCS90/pttbl.dbf
input datafile file number=00002 name=/u01/oradata/HRCS90/sysaux01.dbf
input datafile file number=00106 name=/u01/oradata/HRCS90/py0lrg.dbf
input datafile file number=00004 name=/u01/oradata/HRCS90/psdefault.dbf
input datafile file number=00117 name=/u01/oradata/HRCS90/tlapp.dbf
input datafile file number=00007 name=/u01/oradata/HRCS90/adapp.dbf
input datafile file number=00082 name=/u01/oradata/HRCS90/paapp.dbf
input datafile file number=00074 name=/u01/oradata/HRCS90/hrsapp.dbf
input datafile file number=00092 name=/u01/oradata/HRCS90/ptamsg.dbf
input datafile file number=00056 name=/u01/oradata/HRCS90/fgapp.dbf
input datafile file number=00114 name=/u01/oradata/HRCS90/stapp.dbf
input datafile file number=00005 name=/u01/oradata/HRCS90/aaapp.dbf
input datafile file number=00118 name=/u01/oradata/HRCS90/tllarge.dbf
input datafile file number=00009 name=/u01/oradata/HRCS90/avapp.dbf
input datafile file number=00065 name=/u01/oradata/HRCS90/hrapp2.dbf
input datafile file number=00078 name=/u01/oradata/HRCS90/hrwork.dbf
input datafile file number=00116 name=/u01/oradata/HRCS90/stwork.dbf
input datafile file number=00077 name=/u01/oradata/HRCS90/hrswork.dbf
input datafile file number=00115 name=/u01/oradata/HRCS90/stlarge.dbf
input datafile file number=00049 name=/u01/oradata/HRCS90/epapp.dbf
input datafile file number=00098 name=/u01/oradata/HRCS90/ptprc.dbf
input datafile file number=00037 name=/u01/oradata/HRCS90/eoewapp.dbf
input datafile file number=00032 name=/u01/oradata/HRCS90/eoecapp.dbf
input datafile file number=00086 name=/u01/oradata/HRCS90/piapp.dbf
input datafile file number=00099 name=/u01/oradata/HRCS90/ptprjwk.dbf
input datafile file number=00019 name=/u01/oradata/HRCS90/cularge.dbf
input datafile file number=00035 name=/u01/oradata/HRCS90/eoeiapp.dbf
input datafile file number=00045 name=/u01/oradata/HRCS90/eoppapp.dbf
input datafile file number=00076 name=/u01/oradata/HRCS90/hrslarge.dbf
input datafile file number=00044 name=/u01/oradata/HRCS90/eoltapp.dbf
input datafile file number=00094 name=/u01/oradata/HRCS90/ptappe.dbf
input datafile file number=00050 name=/u01/oradata/HRCS90/eplarge.dbf
input datafile file number=00084 name=/u01/oradata/HRCS90/pcapp.dbf
input datafile file number=00111 name=/u01/oradata/HRCS90/sacapp.dbf
input datafile file number=00100 name=/u01/oradata/HRCS90/ptrpts.dbf
input datafile file number=00023 name=/u01/oradata/HRCS90/eobfapp.dbf
input datafile file number=00096 name=/u01/oradata/HRCS90/ptcmstar.dbf
input datafile file number=00108 name=/u01/oradata/HRCS90/pylarge.dbf
input datafile file number=00016 name=/u01/oradata/HRCS90/cularg1.dbf
input datafile file number=00018 name=/u01/oradata/HRCS90/cularg3.dbf
input datafile file number=00025 name=/u01/oradata/HRCS90/eocmapp.dbf
input datafile file number=00027 name=/u01/oradata/HRCS90/eocmwrk.dbf
input datafile file number=00029 name=/u01/oradata/HRCS90/eoculrg.dbf
input datafile file number=00033 name=/u01/oradata/HRCS90/eoeclrg.dbf
input datafile file number=00036 name=/u01/oradata/HRCS90/eoeilrg.dbf
input datafile file number=00039 name=/u01/oradata/HRCS90/eoewwrk.dbf
input datafile file number=00041 name=/u01/oradata/HRCS90/eoiulrg.dbf
input datafile file number=00046 name=/u01/oradata/HRCS90/eopplrg.dbf
input datafile file number=00048 name=/u01/oradata/HRCS90/eotplrg.dbf
input datafile file number=00053 name=/u01/oradata/HRCS90/erwork.dbf
input datafile file number=00061 name=/u01/oradata/HRCS90/gpdeapp.dbf
input datafile file number=00072 name=/u01/oradata/HRCS90/hrlarg1.dbf
input datafile file number=00079 name=/u01/oradata/HRCS90/htapp.dbf
input datafile file number=00087 name=/u01/oradata/HRCS90/pilarge.dbf
input datafile file number=00120 name=/u01/oradata/HRCS90/waapp.dbf
channel ORA_DISK_1: starting piece 1 at 01-DEC-13
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03002: failure of backup plus archivelog command at 12/01/2013 17:52:45
ORA-19504: failed to create file "/backup_Database_Instance_HRCS90/full_0boqei2c_11_1"
ORA-27040: file create error, unable to create file
Linux-x86_64 Error: 13: Permission denied
RMAN>
RMAN>
RMAN>
RMAN>
RMAN> backup as backupset database;
Starting backup at 01-DEC-13
using channel ORA_DISK_1
channel ORA_DISK_1: starting full datafile backup set
channel ORA_DISK_1: specifying datafile(s) in backup set
input datafile file number=00001 name=/u01/oradata/HRCS90/system01.dbf
input datafile file number=00090 name=/u01/oradata/HRCS90/psimage.dbf
input datafile file number=00060 name=/u01/oradata/HRCS90/gpapp.dbf
input datafile file number=00119 name=/u01/oradata/HRCS90/tlwork.dbf
input datafile file number=00102 name=/u01/oradata/HRCS90/pttlrg.dbf
input datafile file number=00054 name=/u01/oradata/HRCS90/faapp.dbf
input datafile file number=00110 name=/u01/oradata/HRCS90/saapp.dbf
input datafile file number=00101 name=/u01/oradata/HRCS90/pttbl.dbf
input datafile file number=00002 name=/u01/oradata/HRCS90/sysaux01.dbf
input datafile file number=00106 name=/u01/oradata/HRCS90/py0lrg.dbf
input datafile file number=00004 name=/u01/oradata/HRCS90/psdefault.dbf
input datafile file number=00117 name=/u01/oradata/HRCS90/tlapp.dbf
input datafile file number=00007 name=/u01/oradata/HRCS90/adapp.dbf
input datafile file number=00082 name=/u01/oradata/HRCS90/paapp.dbf
input datafile file number=00074 name=/u01/oradata/HRCS90/hrsapp.dbf
input datafile file number=00092 name=/u01/oradata/HRCS90/ptamsg.dbf
input datafile file number=00056 name=/u01/oradata/HRCS90/fgapp.dbf
input datafile file number=00114 name=/u01/oradata/HRCS90/stapp.dbf
input datafile file number=00005 name=/u01/oradata/HRCS90/aaapp.dbf
input datafile file number=00118 name=/u01/oradata/HRCS90/tllarge.dbf
input datafile file number=00009 name=/u01/oradata/HRCS90/avapp.dbf
input datafile file number=00065 name=/u01/oradata/HRCS90/hrapp2.dbf
input datafile file number=00078 name=/u01/oradata/HRCS90/hrwork.dbf
input datafile file number=00116 name=/u01/oradata/HRCS90/stwork.dbf
input datafile file number=00077 name=/u01/oradata/HRCS90/hrswork.dbf
input datafile file number=00115 name=/u01/oradata/HRCS90/stlarge.dbf
input datafile file number=00049 name=/u01/oradata/HRCS90/epapp.dbf
input datafile file number=00098 name=/u01/oradata/HRCS90/ptprc.dbf
input datafile file number=00037 name=/u01/oradata/HRCS90/eoewapp.dbf
input datafile file number=00032 name=/u01/oradata/HRCS90/eoecapp.dbf
input datafile file number=00086 name=/u01/oradata/HRCS90/piapp.dbf
input datafile file number=00099 name=/u01/oradata/HRCS90/ptprjwk.dbf
input datafile file number=00019 name=/u01/oradata/HRCS90/cularge.dbf
input datafile file number=00035 name=/u01/oradata/HRCS90/eoeiapp.dbf
input datafile file number=00045 name=/u01/oradata/HRCS90/eoppapp.dbf
input datafile file number=00076 name=/u01/oradata/HRCS90/hrslarge.dbf
input datafile file number=00044 name=/u01/oradata/HRCS90/eoltapp.dbf
input datafile file number=00094 name=/u01/oradata/HRCS90/ptappe.dbf
input datafile file number=00050 name=/u01/oradata/HRCS90/eplarge.dbf
input datafile file number=00084 name=/u01/oradata/HRCS90/pcapp.dbf
input datafile file number=00111 name=/u01/oradata/HRCS90/sacapp.dbf
input datafile file number=00100 name=/u01/oradata/HRCS90/ptrpts.dbf
input datafile file number=00023 name=/u01/oradata/HRCS90/eobfapp.dbf
input datafile file number=00096 name=/u01/oradata/HRCS90/ptcmstar.dbf
input datafile file number=00108 name=/u01/oradata/HRCS90/pylarge.dbf
input datafile file number=00016 name=/u01/oradata/HRCS90/cularg1.dbf
input datafile file number=00018 name=/u01/oradata/HRCS90/cularg3.dbf
input datafile file number=00025 name=/u01/oradata/HRCS90/eocmapp.dbf
input datafile file number=00027 name=/u01/oradata/HRCS90/eocmwrk.dbf
input datafile file number=00029 name=/u01/oradata/HRCS90/eoculrg.dbf
input datafile file number=00033 name=/u01/oradata/HRCS90/eoeclrg.dbf
input datafile file number=00036 name=/u01/oradata/HRCS90/eoeilrg.dbf
input datafile file number=00039 name=/u01/oradata/HRCS90/eoewwrk.dbf
input datafile file number=00041 name=/u01/oradata/HRCS90/eoiulrg.dbf
input datafile file number=00046 name=/u01/oradata/HRCS90/eopplrg.dbf
input datafile file number=00048 name=/u01/oradata/HRCS90/eotplrg.dbf
input datafile file number=00053 name=/u01/oradata/HRCS90/erwork.dbf
input datafile file number=00061 name=/u01/oradata/HRCS90/gpdeapp.dbf
input datafile file number=00072 name=/u01/oradata/HRCS90/hrlarg1.dbf
input datafile file number=00079 name=/u01/oradata/HRCS90/htapp.dbf
input datafile file number=00087 name=/u01/oradata/HRCS90/pilarge.dbf
input datafile file number=00120 name=/u01/oradata/HRCS90/waapp.dbf
channel ORA_DISK_1: starting piece 1 at 01-DEC-13
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03009: failure of backup command on ORA_DISK_1 channel at 12/01/2013 17:56:51
ORA-19504: failed to create file "/backup_Database_Instance_HRCS90/full_0coqeia5_12_1"
ORA-27040: file create error, unable to create file
Linux-x86_64 Error: 13: Permission denied
As we see the above last 2 commands, either archive or noarchive, I get the same error:
Archive: ORA-19504: "failed to create file /backup_Database_Instance_HRCS90/full_0boqei2c_11_1"
Noarchive: ORA-19504: "failed to create file /backup_Database_Instance_HRCS90/full_0coqeia5_12_1"
My question is:
What is the file "full_0boqei2c_11_1" or "full_0coqeia5_12_1" ? How to solve the above error ?
Thanks.

Oracle database automatically shutdown when i restart computer

Hi all!
i have some problems, so i want your help
i have the database which name is ORCL but i don't understand why when i restart my computer, my database automatically shutdown, so i alway have to execute this command after restarting my computer
connect / as sysdba
startup
could you show me how to fix that error
help me!

Hi,
Refer this thread for a full explaination...
Oracle service failed to start in a timely manner
Regards.

Online backup of the Oracle Collaboration Suite Database automatically ever

Hi everybody!
How to perform an online backup of the Oracle Collaboration Suite Database automatically every half-hour (every 10 minutes)?
Thanks a lot for your helps.

Hi,
Take a look at the Backup and Recovery Basics book in the Administration section of the Database library. This will explain how ArchiveLog works.
richard

How to install Oracle Label Security in Oracle Database 10g EE

Hello All
I just want to know how to install Oracle Label Security in Oracle 10g Database EE.
I read in Oracle Enterprise Manager Grid Control Installation and Basic Configuration that Label Security must be installed before installing Enterprise Manager Grid Control.
I have Oracle Database 10g Release 1 (10.1.0.1) on my Windows XP System, and I patch it to 10.1.0.3.
M.
Sorry about my English.

Options is to connect to Oracle Policy Manager or use Oracle Internet Directory (OID)to administer Oracle Label Security.
Find more ways in the Documentation here:
http://download-uk.oracle.com/docs/cd/B19306_01/network.102/b14267/toc.htm

How to connect oracle application server portal to MS access DataBase

Hello,
I am facing one problem here.
Our client is having their database in MS access and they want to implement the oracle application server portal for their organization then how to connect the MS access DB to oracle Application server portal

There is a worked example of how to connect oracle to an Excel spreadsheet, which is easily modifyable to read from an Access Database.
http://asktom.oracle.com/pls/ask/f?p=4950:61:::::P61_ID:4406708207206#18830681837358
I had some concurrency problems - only one person could use the link at any one time, so I used it to load the data into oracle tables.
Tak

How to configure Oracle Enterprise Manager for ASM RAC Database ?

Dears,,
We have two databases (Primary & Standby), each database has two instances
Database version: Oracle Database 10g Enterprise Edition Release 10.2.0.4.0 - 64bit
How to configure Oracle Enterprise Manager for this environment ?
I need documentation for this please.
Many thanks & Regards,,

Assuming an agent is running on the servers you want to monitor,
navigate to the Agent home page (Via setup --> Agent)
When in the agent home page select 'Add Database'and press [Go]
Assuming yopur database now gets recognized, select the Configure icon and enter the password for dbsnmp.
When done, press [Ok] to return to the agent home page.
Regards
Rob
http://oemgc.wordpress.com

How to create a database in ORACLE 8i

How to create a database in ORACLE 8i

hello ...
enter in
http://www.oracle.com/pls/db102/portal.portal_db?selected=2 between demand and type in "create database"
or read others docs ORACLE.
AF

How to mounted oracle database automatically in oracle version 8.1.7?

Similar Messages

Maybe you are looking for