How to open user status of BP in Web UI?

Dear Expert,
SAP does not support display user status(Status profile in GUI) of BP in Web UI.
Now I have requirement to display the status in Web UI. We also can edit the field in Web UI.
I am new comer for CRM 2007. How can I develop it? Thanks.
LiuBo

Hi LiuBo,
You have to see if the BOL of BP suports this field, transaction GENIL_MODEL_BROWSER. If the BOL doesn't suport the field you have to enhance the bol. Find the structure and create the field that you need. After this you have to find the class that is responsible for searching and enhance this class.
Best Regards,
Caíque Escaler

Similar Messages

How to Set User Status of Sales Order at item level.

How to Set User Status of Sales Order at item level by default to 'Purchase Req Not Created' (example)while creating order. Please tell EXIT Name to be triggered & Internal table to be populated.
Thanx,
Srini
Moderator message: please do your own research before asking.
Edited by: Thomas Zloch on Feb 21, 2011 11:19 AM

Mathew,
Here is a document that should help you get started on enhancing 2LIS_11*
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/c09d5356-d8c4-2d10-8b84-d24723fc1f0a?QuickLink=index&overridelayout=true
Good luck!

How to get user logged in to ironport web

How to get user logged in to ironport web by their username, time connected and the IP address?

The onbox reporting can only show what web traffic is currently being surfed. We can provide a near-real time view of this web traffic with a "Web Tracking Report".
However, there is not a report available that depicts what you're describing. (This information is best contained on the domain server). The closes we could get with the WSA is displaying which credentials we are currently caching. (Which users we've seen since within the surrogate timeout). This is possible with the authcache command on the cli.
~Tim

How to change user status

Hi
I want to change the user status from X - > Y - > Z - > X based on config... so in doing that my system status would be set to released.
I am doing the updation each time from X--> Y and calling crm_order_maintain, crm_order_save, commit work and save , wait up to 20 seconds, crm_order_initialize.
Without doing wait up to 20 seconds, i am getting an error "Order cannot be changed" when i am updating the user status from Y->Z next time for same guid object ( contract item ).
My questions are
1. How do we identify whether we can change contract, for next user status using any FM. It says contract cannot be changed as "Transferring not completed". I used FM "CRM_ORDER_CHECK_CHANGE_ALLOWED" , but it always gives message "in transferring in middleware". Is there any other way to avoid wait up to 20 seconds , instead determine whether the contract can be changeable.
2. Can we update X>Y>Z--->X in single crm_order_maintain.. can system track this changes that contract item has gone through various user status. When i checked it only keeps Y status. I am passing all user status as active. Can we pass in any other manner?..
3. When i call order initialize after each update of status , the lock is getting released and for next status chnage when i call order maintain, if some other user opens same contract in that time... lock error comes.. when i pass Keep lock in order initialize it is not working.. does that work and why does its not working....
Regards,
D

Deepthi,
Dont pass all the statuses at once to CRM_ORDER_MAINTAIN,
For eg :
To get to status Z from X->Y->Z , you can follow below procedure
take staus - X
fill it_status and it_inputfields with a record each corresponding to status X.
Call CRM_ORDER_MAINTAIN
take staus - Y
fill it_status and it_inputfields with a record each corresponding to status Y.
Call CRM_ORDER_MAINTAIN
take staus - Z
fill it_status and it_inputfields with a record each corresponding to status Z.
Call CRM_ORDER_MAINTAIN
After reching Z , call ORDER_SAVE and COMMIT.
Please use a internal table for all your status and place the order_maintain in loop , so that each status gets maintained while you navigate to next status.
Regards,
Nithish
Edited by: nithish P on May 17, 2011 8:15 AM

How to get user status in place of system status - B2C

Hi,
In our requirement for B2C webshop, we need to replace the user stattus with the system status . In the standard B2C webshop, , we have only OPEN and COMPLETED orders, which related to system status - OPEN and COMPLETED.
I want to get user status in place of system status.
Please help me how to proceed with the things.
Regards
Yaswanth.K

Done using Custom RFC and jsp modifications!

How to define user status that forbids editing the document

Hi All,
Im working on CRM 7.0
I need to define a user status say " ON HOLD" . when this user status is set the document should not be edited or changed by anyone. However as soon as we move to next status document should be editable.
I configured a user status and in the TRANS column
selected CLks .
in the transaction control i have change document set to forbidden.
The problem is when i set this status on the document , the document is locked as desired and i am not allowed to change the status itself (not desired) .
How do i configure the status so that i can also switch between on hold and other user statuses or how can i release the On Hold status?
How do you set the Delete option in transaction control for any allowed transaction for a user status.
Thanks In advance!
Survee

Robert,
Thank you for your input.
We have defined a simple status where in editing is not alllowed by validation during save.
We are controlling the status change from "On hold" to next status by authorization group.
Basically if the user has access to the auth group he can change the status to next status.
Cheers
Survee

CRMD_ORDER - How to add user status for searching

Hi Gurus
Our requirement is that we want to search sales transactions in CRMD_ORDER by user defined statuses. Currently I can only search by system status (along with other standard criteria such as created by/direct processing etc). How do I add more search criterias so as to enable searching solely by user status?
Please advise.
Thanks

Hi Jai,
As per your requirement, i suggest u to check the Tx CRM_SRV_REPORT (standard Tcode)
In this report you can change the layout of the screen after executing the report, and choose the user status from the layout.
I hope this will help you
Best Regards,
Madhup

How to open user file in Flex Application

Hi forum,
I develop flex2 application where user can browse and open
XML file: the file should be loaded to text area.
Could you, please, advice me how to browse and open user
file?
I found FileReference class but it looks that it can only
upload file to a server. I need to open the file in flex
application.
Thanks for your help.
Smoke007

The issue isn't Flex, but the Flash Player. It is too much of
a security risk to allow SWFs running in the Flash Player to open
local files. Imagine going to a web site that has a SWF banner ad -
but that banner ad opens local files and sends them to a remote
system - all of your personal and financial information transfered
without your consent.
Flex apps running in the AIR player are different - the end
user must launch them explicitly, just like any other local
program.

How to update user status in the QM notifications

Dear Experts,
PLz tell how to update/change user status in the QM notifications..I have maintained the user status profile and assigned the same to the notification type,but user status are not getting updated in the notifications..
Thanks in advance
Ankush

Hi,
SPRO - Quality Management - Quality Notifications - Overview of Notification Type.
In that select the concerned notification and click on the status profile and there you can assign the status profile for the concerned notification Type.
There will be two types,
status profile for notifications and status profile for tasks, assign as per the requirement.
Regards,
Naveen.

How to update user status in CRM Order depending the delivery status in R/3

Hi All,
In my scenario the partial delivery allowed to the customer while creating the CRM Order. But as per my requirement the status should be updated when the complete order and delivery takes place.
Let me describe you clearly:
Suppose I want to deliver 5 quantities products to the customer but initially I want to deliver only 3 quantities and rest 2 quantities later. When I do the post goods issue of 3 quantities in R/3 system the status should not change in CRM system. When I will do the rest 2 quantities in post goods issue in R/3 then the user status should change in CRM Order. But in current when I do the delivery of 3 quantities the user status is changing in CRM Order.
I need the user status should change in CRM only when the entire deliverytakes place in R/3.
Thanx
Chinmaya

Whenever an item is fully delivered, by standard, a "Completely Delivered" status will be updated into the item. If the I suppose by referring to that you will know an item is partial or completely delivered. When all items in the order is fully delivered, the standard header status will set to "Completed". So, you will also know if the whole order is partial or completely delivered.
If you want to add a user status, the simplest, you can make use of the ORDER_SAVE Badi. Just call the function CRM_STATUS_MAINTAIN_OW. You can update both header and item status.

How to extract User status for Sales and purchase contracts

Hello,
We need to load the User status linked to sales and purchase contract.
I think that there is no datasource in BI content.
What is the better solution ?
- Enhance a standard datasource like 2LIS_11_VASTH with a status field (This solution is not ok for Purchase contract)
- Create a spécific datasource to extract this status
- Others
Thanks for your help
Best regards
Christophe

Hi,
In your scenario its better to use generic extractor to get the reqd data. This data can than be stored in a DSO on the BI side.
And you can look up for the user status using a routine .
Regards,
Rahul

How to release user status for sales documents automatically

Hi All,
We have configured status profile for third party sales document type. This will stop creating PR from sales order. After chaning the status from STP to GO, system will create PR. But the problem here is user is going and changing the object status manully.
The business wants to release at a time many records automatically. Do we have any transaction code which we can use for changing the user status automatically for many orders?
We have tried V.26, but this is just report we can not change the status automatically,
Thanks in advance!
Regards
Lakshmikanth

Hi,
No standard program exists for it, as statuses are always customized.
create a BDC program for status change and run in backgram as batch job.

How to open user system "select program to open with" for given file?

Hi,
I'm trying to make file management application in Java.
I already know how to open file in system preferred application. It's quite easy.
The other issue I thinking about now is that I need to implement "Open With" functionality (like in Ubuntu: you right press on the file -> select "Open With" -> "Other" and system's default application selection window starts.
I tried to manage that with some Java default classes, but I didn't found one.
So, I'm working on solution, based on Runtime.getRuntime().exec("something");
I already know what commands i should write in Mac and Windows to open "application selection" for file:
1) Windows: RUNDLL32.EXE SHELL32.DLL,OpenAs_RunDLL <file.ext>
2) Mac: open <file.ext>
How to do same on linux (Gnome/KDE)? I still not found easy solution for that.
Or maybe I am digging in wrong direction? If so - prease correct me.
P.S. I tried Desktop.getDesktop() and Java Desktop Integration Components (JDIC), but it seems, that both of them don't have a function for functionality i need.
Thank you for your replies.

Never seen that one before. Maybe a Linux forum can help with that.
Anyway. since ps seems to be working, you might try the following:
before opening the dialog
ps -auxww | grep <username> | grep -v grep | awk '{print $2}' | sort > beforeafter opeing the dialog (and while it is still open)
ps -auxww | grep <username> | grep -v grep | awk '{print $2}' | sort > after
diff before after
ps -auxww <pidfromabove>

How to open Workflow status monitor from form personalization

I am trying to open workflow status monitor page from special menu using form personalization and encountering below error message.
Any help or guidance in this regard will be much appreciated. Here are the personalization details that I have set.
Builtin Type : Launch a Function
Function COde: FND_FNDWFIAS
Function Name: Monitor Activities List
Parameters:
I tried both the below in parameter field and both are returning null point exception while opening page.
=SELECT 'FUNCTION_NAME='||'FND_FNDWFIAS'||' OPEN_FLAG='||'Y'||' SESSION_FLAG='||'Y'||' ITEM_TYPE='||'XXOMCP'||
' ITEM_KEY='||:GLOBAL.XXG_WF_KEY||' ADMIN_MODE='||'NO'||' ACCESS_KEY='||'Y' FROM DUAL
=SELECT 'FUNCTION_NAME='||'FND_FNDWFIAS'||'OPEN_FLAG='||'Y'||'SESSION_FLAG='||'Y'
||'OTHER_PARAMS ='||'ITEM_TYPE=XXOMCP'||'&ITEM_KEY='||:GLOBAL.XXG_WF_KEY||'&ADMIN_MODE=NO&ACCESS_KEY=Y' FROM DUAL
Regards,
Sree

Sorry Phil,
but that's all you got.
Frank

How to open a saved view in bex web analyzer.

Hi All
In web analyzer I have saved a view through context menu -- save view. but in open window I am unable to find saved view. Can any one help me to know how to open it.
Thanks in advance
Vani

Hi Bhaskar
I can not even see it in favourites or roles.
Thanks
Sushma

How to open user status of BP in Web UI?

Similar Messages

Maybe you are looking for