How to Populate Internal table data to Table Control in a Report Program
Dear All,
How to Populate Internal table data to Table Control in a Report Program? It is a pure report program with out any Module pool coding involved, which is just used to display data. Till now it is being displayed in a report. Now the user wants the data to be displayed in a table control. Could someone tell me how to go about with this.
Thanks in Advance,
Joseph Reddy
If you want to use a table control, you will need to create a screen.
In your report....
start-of-selection.
perform get_data. " Get all your data here
call screen 100. " Now present to the user.
Double click on the "100" in your call screen statement. This will forward navigate you to the screen. If you have not created it yet, it will ask you if you want to create it, say yes. Go into screen painter or layout of the screen. Use the table control wizard to help you along the process. It will write the code for you. Since it is an output only table control, it will be really easy with not a lot of code.
A better way to present the data to the user would be to give it in a ALV grid. If you want to go that way, it is a lot easier. Here is a sample of the ALV function module. You don't even have to create a screen.
report zrich_0004
no standard page heading.
type-pools slis.
data: fieldcat type slis_t_fieldcat_alv.
data: begin of imara occurs 0,
matnr type mara-matnr,
maktx type makt-maktx,
end of imara.
* Selection Screen
selection-screen begin of block b1 with frame title text-001 .
select-options: s_matnr for imara-matnr .
selection-screen end of block b1.
start-of-selection.
perform get_data.
perform write_report.
* Get_Data
form get_data.
select mara~matnr makt~maktx
into corresponding fields of table imara
from mara
inner join makt
on mara~matnr = makt~matnr
where mara~matnr in s_matnr
and makt~spras = sy-langu.
endform.
* WRITE_REPORT
form write_report.
perform build_field_catalog.
* CALL ABAP LIST VIEWER (ALV)
call function 'REUSE_ALV_GRID_DISPLAY'
exporting
it_fieldcat = fieldcat
tables
t_outtab = imara.
endform.
* BUILD_FIELD_CATALOG
form build_field_catalog.
data: fc_tmp type slis_t_fieldcat_alv with header line.
clear: fieldcat. refresh: fieldcat.
clear: fc_tmp.
fc_tmp-reptext_ddic = 'Material Number'.
fc_tmp-fieldname = 'MATNR'.
fc_tmp-tabname = 'IMARA'.
fc_tmp-outputlen = '18'.
fc_tmp-col_pos = 2.
append fc_tmp to fieldcat.
clear: fc_tmp.
fc_tmp-reptext_ddic = 'Material'.
fc_tmp-fieldname = 'MAKTX'.
fc_tmp-tabname = 'IMARA'.
fc_tmp-outputlen = '40'.
fc_tmp-col_pos = 3.
append fc_tmp to fieldcat.
endform.
Regards,
Rich Heilman
Similar Messages
-
How to pass table data to brf plus application through abap program
Dear All,
i have a question related to BRF Plus management through abap program.
In brf plus application end, Field1,field2,field3 these 3 are importing parameters.
Table1->structure1->field4,field5 this is the table,with in one structure is there and 2 fields.
in my abap program, i am getting values of fields let us take field1,field2,field3,field4,field5.
And my question is
1) How to pass fields to BRF Plus application from abap program.
2)How to pass Table data to BRF Plus application from abap program.
3)How to pass Structure data to BRF Plus application from abap program.
4)How to get the result data from BRF Plus application to my abap program.
And finally , how to run FDT_TEMPLATE_FUNCTION_PROCESS.
How do i get the code automatically when calling the function in brf plus application.
Regards
venkata.Hi Prabhu,
Since it is a Custom Fm i cant see it in my system.
Look if u want to bring data in internal table then there could be two ways::
1) your FM should contain itab in CHANGING option , so that u can have internal table of same type and pass through FM,
2) read values one by one and append to internal table.
Thanks
Rohit G -
How to populate multiple entries to Bapi Table
Hi all,
How to populate multiple entries to Bapi Table.....
Here is the code(in component controller)
Z_Recr_Apply_Point_Input request = new Z_Recr_Apply_Point_Input(WDModelScopeType.TASK_SCOPE);
int size = wdContext.nodeApplicants().size();
for(int i = 0 ; i < size ; i++)
String isselected = wdThis.wdGetContext().nodeApplicants().getElementAt(i).getAttributeAsText("Appl_Number");
if(isselected == "true")
com.models.veteranpoint.Zrecr_Aplno appid = new
com.models.veteranpoint.Zrecr_Aplno();
appid.setAppl_Number(wdContext.nodeApplicants().
getApplicantsElementAt(i).getAppl_Number());
request.addApplicants(appid);
I want to pass the selected input field to bapi..
Please tel me where i pass the input field...
Please correct my code...
Thanks & regards
Mathi sHi,
Steps to insert multiple entries to BAPI table.
1.Create an instance for BAPI input
2.Bind the instance to the Node of the BAPI input
3.Create instance of the Structure(BAPI table) to which input has to be added.
4.Set the input values to the Structure instance.
5.Add the instance to the BAPI input.
6.Execute
From the given example,I assume Z_Recr_Apply_Point_Input is the BAPI Input and com.epiuse.us.recruitment.models.veteranpoint.Zrecr_Aplno as Structure
Step 1:
Z_Recr_Apply_Point_Input request = new Z_Recr_Apply_Point_Input(WDModelScopeType.TASK_SCOPE);
Step 2:
<b>wdContext.nodeZ_Recr_Apply_Point_Input.bind(request);</b>
Steps 3 & 4:
int size = wdContext.nodeApplicants().size();
for(int i = 0 ; i < size ; i++)
String isselected = wdThis.wdGetContext().nodeApplicants().getElementAt(i).getAttributeAsText("Appl_Number");
if(isselected == "true")
com.epiuse.us.recruitment.models.veteranpoint.Zrecr_Aplno appid = new
com.epiuse.us.recruitment.models.veteranpoint.Zrecr_Aplno();
appid.setAppl_Number(wdContext.nodeApplicants().
getApplicantsElementAt(i).getAppl_Number());
<b>wdContext.currentZ_Recr_Apply_Point_InputElement().modelObject().addRecr_Aplno(appid);</b>
Step 5:
<b>wdContext.currentZ_Recr_Apply_Point_InputElement().modelObject().execute();</b>
Regards,
Viji Priya -
Hello,
please help me to understand how the macros work. I am facing database inconsistency. The CRM-system retrieves a GUID of an opportunity’s item and checks its existence. However, this GUID (here it is es_info-ref_object) does not exist. As result, an exception is triggered.
I am trying to figure out which data base table is responsible for the inconsistent data. Instead of SELECT statement, I see in the debugger that a macro retrieves the “guilty” entry .
macro_execute macro_msg_data_read_rea.
My Question: How can I find a data base table containing a GUID, which is result of the macro’s execution?
Thanks a lot
AndrejWhen you save a PDF out of Distiller it doesn't just have different options, it's an entirely different program. It doesn't do things the same way, so it can't have the same options. Saving from Distiller is in many ways better, expecially in that transparency isn't flattened.
What specific options are you looking for? -
How to compare table data and table field
Hi buddy,
I have some question about how to compare table data and table field.
1. I know there is one method: CL_ABAP_UNIT_ASSERT=>ASSERT_TABLE_CONTAINS , it use in unit test to compare the table data(A and B) , you can loop table A into structure A1, then use this mehtod it can compare whether table B contain structure A1. but when I try to use this in main program it will dump.
CL_ABAP_UNIT_ASSERT=>ASSERT_TABLE_CONTAINS(
LINE = A1
TABLE = B ).
Is there any method or FM can be used to compare the table data ?
2. I also want to compare two table field , try to find out the different. How to realize this.
Thank you for your sincerely answer.Hi Zongjie,
What`s the difference, if you using loop A into wa_A, read table B into wa_B with all field, then compare with wa_A and wa_B.
The question 2, seems no standard FM available here.
Loop A into wa_A.
Loop B into wa_B.
if wa_A-field1 eq wa_B-field1.
endif.
if wa_A-field2 eq wa_B-field2.
endif.
endloop.
endloop.
regards,
Archer -
How to find the deleted data in tables
guys,
how to find the deleted data in tables example: i want to see whether anyone deleted data in MB5B report tables like mbew, etc.,
regards,Hi,
MBEWH is actually the history table of MBEW. It will record all the changes. As I have told you earlier if you have deleted the record dirctly from the table then it will not come even in the table MBEWH
That means no changes have been made.
regards -
How do i save the data in table ??? URGENT
how do i save the data in table ??? URGENT
Hope can attach some example VI for reference =]
Attachments:
data in table.JPG 271 KB
block diagram.JPG 459 KBYou didn't mention which version of LabVIEW you are using. I adapted your method in this example. Not sure this is an efficient method. I just pass the 2d array through in the false case.
Using LabVIEW 2010SP1 and TestStand 4.5
Attachments:
WriteTable.PNG 35 KB -
Getting data from table control to the report program.
Hi,
I created a table control using report program and i am trying to enter data in the table control which i want to update in the DB table. How can i get the data entered in table control to the report program, so that i can update the DB table.
Please help me finding out which variable will hold the data entered in table control(dynamically).hi,
in your table control you give some name to that table control say it_cntrl.
this only serves as the internal table to process the table control data.
like u can write like this.
loop at it_cntrl into wa_cntrl. "wa_cntrl is work area of type it_cntrl table type
......... "do your functining
end loop.
any clarification get in touch
thnks -
How to populate the Quering data into Excel sheet in Oracle
Dear Guys,
How to populate the Quering data into Excel sheet in oracle.
Please provide a solution.
Thanks & Regards,
Senthil K KumarHi
To make Excel sheets from sqlplus, you can use the markup html tag in sqlplus.
Here's an example.
Example
<code>
SET LINESIZE 4000
SET VERIFY OFF
SET FEEDBACK OFF
SET PAGESIZE 999
SET MARKUP HTML ON ENTMAP ON SPOOL ON PREFORMAT OFF
SPOOL c:\test_xls.xls
SELECT object_type
, SUBSTR( object_name, 1, 30 ) object
, created
, last_ddl_time
, status
FROM user_objects
ORDER BY 1, 2
SPOOL OFF
SET MARKUP HTML OFF ENTMAP OFF SPOOL OFF PREFORMAT ON
SET LINESIZE 2000 VERIFY ON FEEDBACK ON
</code> -
How to display the header data on different position in alv report
hi all,
how to display the header data on different position in alv report.
for example ,
customer name
xxxx xxxx
vendor name street
xxxx xxxx xxxxx
pls help me .hi
as per my understanding you need to trnasfer header internal table data to pdf..
please check the following links for internal table to pdf..
Convertion of Internal table data to PDF
This link is related to ur issue
Re: how to insert the calling of the FM: OTF to PDF
Thanks -
How to populate internal table field with text data?
Hello Experts,
I was able to load text file to a internal table but data is not populating each field. Can someone help me how to populate each field of internal table from text file?
Here is the text file:
io_name, io_type, io_txsht, io_txlng, io_datatype, io_length
ZEA_IO1, CHA, IO Test, IO Test 1, CHAR, 20
ZEA_IO2, CHA, IO Test, IO Test 2, CHAR, 20
Here is the Code:
*& Report ZAS_BAPI_TEST *
*& InfoObject Creation through BAPI.
*& Read the Text file, call a BAPI to create InfoObjects. *
*& Text file will hold the Info Object Structure. Text file will be *
*& located either work station or local PC.
*& Step 1. Create internal table to hold InfoObject structure *
*& Step 2. Retrieve/Load text file into Internal Table structure *
*& Step 3. Call BAPI Function to Create IO *
*& Step 4. Call BAPI Function to Activate IO *
REPORT ZAS_BAPI_TEST .
Make data separator a comma
CONSTANTS: gc_tab TYPE c VALUE ','.
Declaring Internal table for creating InfoObject
DATA: p_file TYPE string.
DATA: BEGIN OF itab-bapi OCCURS 0,
io_name like BAPI6108-infoobject,
io_type like BAPI6108-type,
io_txsht like BAPI6108-textshort,
io_txlng like BAPI6108-textlong,
io_datatype like BAPI6108-datatp,
io_length like BAPI6108-intlen,
END OF itab-bapi.
DATA ibapi LIKE STANDARD TABLE OF itab-bapi.
PARAMETERS: sel_file(1500) TYPE c default ' ' OBLIGATORY LOWER CASE.
PUT THE TEXT FILE PATH TO P_FILE
p_file = sel_file.
Copy the file from the workstation to the server ****
CALL FUNCTION 'GUI_UPLOAD'
EXPORTING
filename = p_file
FILETYPE = 'ASC'
HAS_FIELD_SEPARATOR = SPACE
HEADER_LENGTH = 0
DAT_MODE = SPACE
CODEPAGE = SPACE
IGNORE_CERR = ABAP_TRUE
REPLACEMENT = '#'
READ_BY_LINE = 'X'
IMPORTING
FILELENGTH =
HEADER =
TABLES
data_tab = itab-bapi[]
EXCEPTIONS
file_open_error = 1
file_read_error = 2
no_batch = 3
gui_refuse_filetransfer = 4
invalid_type = 5
no_authority = 6
unknown_error = 7
bad_data_format = 8
header_not_allowed = 9
separator_not_allowed = 10
header_too_long = 11
unknown_dp_error = 12
access_denied = 13
dp_out_of_memory = 14
disk_full = 15
dp_timeout = 16
not_supported_by_gui = 17
error_no_gui = 18
OTHERS = 19.
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
MESSAGE e012(zea_spms) WITH 'Method' 'GUI_UPLOAD' sy-subrc.
&1 &2 issued return code &3
ELSE.
pit_data[] = lit_data[].
ENDIF.
ENDIF.
loop at itab-bapi.
write: /5 itab-bapi-io_name,
20 itab-bapi-io_type,
30 itab-bapi-io_txsht,
50 itab-bapi-io_txlng,
75 itab-bapi-io_datatype,
85 itab-bapi-io_length.
endloop.
SELECT THE LOCATION FOR TEXT FILE
AT SELECTION-SCREEN ON VALUE-REQUEST FOR sel_file.
CALL FUNCTION 'WS_FILENAME_GET'
EXPORTING
def_filename = ''
def_path = 'C:\'
mask = ',Documentos de texto (*.txt), *.txt.'
mode = ''
IMPORTING
filename = p_file
EXCEPTIONS
inv_winsys = 1
no_batch = 2
selection_cancel = 3
selection_error = 4
OTHERS = 5.
find '.txt' IN p_file.
if sy-subrc <> 0.
concatenate p_file '.txt' into sel_file.
else.
sel_file = p_file.
endif.
Create InfoObject through BAPI Function
*CALL FUNCTION 'BAPI_IOBJ_CREATE'.
*IMPORTING
VALUE(DETAILS) LIKE BAPI6108 STRUCTURE BAPI6108
*EXPORTING
VALUE(INFOOBJECT) LIKE BAPI6108-INFOOBJECT
VALUE(RETURN) LIKE BAPIRET2 STRUCTURE BAPIRET2
TABLES
COMPOUNDS STRUCTURE BAPI6108CM OPTIONAL
ATTRIBUTES STRUCTURE BAPI6108AT OPTIONAL
NAVIGATIONATTRIBUTES STRUCTURE BAPI6108AN OPTIONAL
ATRNAVINFOPROVIDER STRUCTURE BAPI6108NP OPTIONAL
HIERARCHYCHARACTERISTICS STRUCTURE BAPI6108HC OPTIONAL
ELIMINATION STRUCTURE BAPI6108IE OPTIONAL
RETURNTABLE STRUCTURE BAPIRET2 OPTIONAL
Activate InfoObject through BAPI Function
CALL FUNCTION 'BAPI_IOBJ_ACTIVATE_MULTIPLE'
*ENDFORM. " RETRIEVE_DATASET
I appreciate your help.
Regards,
MauI have used tab delimited file.
Here are file contents
io_name io_type io_txsht io_txlng io_datatype io_length
ZEA_IO1 CHA IO Test IO Test 1 CHAR 20
ZEA_IO2 CHA IO Test IO Test 2 CHAR 20
And here is program used
*& Report ZAS_BAPI_TEST *
*& InfoObject Creation through BAPI.
*& Read the Text file, call a BAPI to create InfoObjects. *
*& Text file will hold the Info Object Structure. Text file will be *
*& located either work station or local PC.
*& Step 1. Create internal table to hold InfoObject structure *
*& Step 2. Retrieve/Load text file into Internal Table structure *
*& Step 3. Call BAPI Function to Create IO *
*& Step 4. Call BAPI Function to Activate IO *
REPORT ZAS_BAPI_TEST .
Make data separator a comma
CONSTANTS: gc_tab TYPE c VALUE ','.
Declaring Internal table for creating InfoObject
DATA: p_file TYPE string.
DATA: BEGIN OF itab-bapi OCCURS 0,
io_name like BAPI6108-infoobject,
io_type like BAPI6108-type,
io_txsht like BAPI6108-textshort,
io_txlng like BAPI6108-textlong,
io_datatype like BAPI6108-datatp,
io_length like BAPI6108-intlen,
END OF itab-bapi.
DATA ibapi LIKE STANDARD TABLE OF itab-bapi.
PARAMETERS: sel_file(1500) TYPE c default ' ' OBLIGATORY LOWER CASE.
PUT THE TEXT FILE PATH TO P_FILE
p_file = sel_file.
Copy the file from the workstation to the server ****
CALL FUNCTION 'GUI_UPLOAD'
EXPORTING
filename = p_file
<b>FILETYPE = 'ASC'
HAS_FIELD_SEPARATOR = 'X'</b>
TABLES
data_tab = itab-bapi[]
EXCEPTIONS
file_open_error = 1
file_read_error = 2
no_batch = 3
gui_refuse_filetransfer = 4
invalid_type = 5
no_authority = 6
unknown_error = 7
bad_data_format = 8
header_not_allowed = 9
separator_not_allowed = 10
header_too_long = 11
unknown_dp_error = 12
access_denied = 13
dp_out_of_memory = 14
disk_full = 15
dp_timeout = 16
not_supported_by_gui = 17
error_no_gui = 18
OTHERS = 19.
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
MESSAGE e012(zea_spms) WITH 'Method' 'GUI_UPLOAD' sy-subrc.
&1 &2 issued return code &3
ELSE.
pit_data[] = lit_data[].
ENDIF.
ENDIF.
loop at itab-bapi.
write: /5 itab-bapi-io_name,
20 itab-bapi-io_type,
30 itab-bapi-io_txsht,
50 itab-bapi-io_txlng,
75 itab-bapi-io_datatype,
85 itab-bapi-io_length.
endloop.
SELECT THE LOCATION FOR TEXT FILE
AT SELECTION-SCREEN ON VALUE-REQUEST FOR sel_file.
CALL FUNCTION 'WS_FILENAME_GET'
EXPORTING
def_filename = ''
def_path = 'C:\'
mask = ',Documentos de texto (*.txt), *.txt.'
mode = ''
IMPORTING
filename = p_file
EXCEPTIONS
inv_winsys = 1
no_batch = 2
selection_cancel = 3
selection_error = 4
OTHERS = 5.
find '.txt' IN p_file.
if sy-subrc <> 0.
concatenate p_file '.txt' into sel_file.
else.
sel_file = p_file.
endif.
Create InfoObject through BAPI Function
*CALL FUNCTION 'BAPI_IOBJ_CREATE'.
*IMPORTING
VALUE(DETAILS) LIKE BAPI6108 STRUCTURE BAPI6108
*EXPORTING
VALUE(INFOOBJECT) LIKE BAPI6108-INFOOBJECT
VALUE(RETURN) LIKE BAPIRET2 STRUCTURE BAPIRET2
TABLES
COMPOUNDS STRUCTURE BAPI6108CM OPTIONAL
ATTRIBUTES STRUCTURE BAPI6108AT OPTIONAL
NAVIGATIONATTRIBUTES STRUCTURE BAPI6108AN OPTIONAL
ATRNAVINFOPROVIDER STRUCTURE BAPI6108NP OPTIONAL
HIERARCHYCHARACTERISTICS STRUCTURE BAPI6108HC OPTIONAL
ELIMINATION STRUCTURE BAPI6108IE OPTIONAL
RETURNTABLE STRUCTURE BAPIRET2 OPTIONAL
Activate InfoObject through BAPI Function
CALL FUNCTION 'BAPI_IOBJ_ACTIVATE_MULTIPLE'
*ENDFORM. " RETRIEVE_DATASET
This program is working fine. You can test it.
Only problem is as the column headings are big for some columns, they are getting truncated which you can always change by changing the column width in declaration
Please let me know if this helps.
ashish -
How Bex flageffects internally effects the SID table entries for Master Dat
Hi Every one,
I do understand how the Bex flag setting works in relation to reporting like y we set the flag or y we dont set the flag when we do reporting or not on ODS.. <b>My question here is, i dont understand, how the SID tables or the master data tables or ODS tables get effected with this flag. Can some one explain me what kind of changes in the tables takes place with this flag setting and how it is used in the reporting..</b> How this thing is different with respect to Cube reporting process.. I do understand that ODS doesnt have Dimensions.. so i am just looking for conceptual clarification and not any forum links related to the Bex falg.. i have already gone through many links in the forum, but they didnt help me to clarify this process at table level which i am looking for... ANy help will be highly appreciated in SDN way..
regards,
kishoreThanks Durgesh but I have tried every master data test in RSRV. I think because these document number characteristics don't have master data tables most of the tests return a message that the test does not apply to the characteristic. These characteristics only have a sid table.
-
How to populate List Item from the table in a form builder
I want to know how to populate the List Item (pop up menu and combo box) from a table.
Supposing I have a table Customer(cust_id,cust_name)
and now I want to populate it in such a manner that I can update the data back to the database and also access the list on the form.This is the method i am using to populate a list.
1- First of all you need to create a non-database list item for customer_name.
2-create this procedure
PROCEDURE populate_list_with_query
--Populates the given list item with the specified query.
(p_list_item in VARCHAR2
,p_query in VARCHAR2)
IS
/* Name the record group after the list item (no
block prefix). */
cst_rg_name constant VARCHAR2(30) :=
GET_ITEM_PROPERTY(p_list_item,item_name);
v_rg_id RECORDGROUP;
BEGIN
v_rg_id := FIND_GROUP(cst_rg_name);
IF ID_NULL(v_rg_id) THEN
v_rg_id := CREATE_GROUP_FROM_QUERY(cst_rg_name,p_query);
END IF;
IF POPULATE_GROUP(v_rg_id) = 0 THEN
POPULATE_LIST(p_list_item,v_rg_id);
/* Force display of first list element label
in the list item. */
COPY(GET_LIST_ELEMENT_VALUE(p_list_item,1),p_list_item);
END IF;
END populate_list_with_query;
3- Create When-Create-Record on the block level and write this code
BEGIN
POPULATE_LIST_WITH_QUERY('bk1.customer_name',
'SELECT customer_name, to_char(customer_id) FROM customer');
END;
In this example, the customer name is the (visible) list label and the customer ID is the (actual) list value
i hope this will solve your problem ... -
New page in smart form when displaying internal table data in table
Hi ,
My requirement in smartform is like
I'm using the tables to display the internal table data in main window .
based on SORTF field in the internal table ,when SORTF field value changes all the related to that SORTF value should be displayind in the new page.
Please anybody tell me that , how to do this?
Thanks
NaveenHi Navi,
Try this Logic.
1) Go to Smartform,
2) Declare a flag variable w_flag type c
3)Go to Main Window
a) Go to table
b) Create one more Table Line
c) Create a CODE Line in that.
write inside CODE as Below:-
CLEAR: w_flag.
ON CHANGE OF w_final-sortf.
w_flag = 'X'.
ENDON.
d) Create one COMMAND Under CODE line created above.
click on check Box "Go to New Page" ( Page1 or Page2 or give as reqd ).
click on conditions tabe of COMMAND
write: w_flag = 'X'.
Hope this will work
Reward Points if Useful
regards
Avi............. -
How to Populate local variable values to tables like likp .
Hi..I have taken 3 local variables date1 date2 and date3 .How to populate them in table (likp-lfdat).In date1 i have dates of lfdat between 14/05 to 21/05 and date2 from 22/05 to 28/05 and date3 one more week.In o/p how can see data between these dates range only?
Use Where clause as:
WHERE
LFDAT IN DATE1
OR LFDAT IN DATE2
OR LFDAT IN DATE3.
Regards,
Anil
Maybe you are looking for
-
While watching an iTunes movie from my Apple TV, why does my movie stop playing at the 1 hour mark? I'm assuming I have a setting causing this to happen, but I have no idea what setting needs to be changed. Can someone help me?
-
[Solved] Unable to kill process
Hi, After an upgrade this week I'm having a problem not being able to kill a crashing process. The process that crashes is linuxdcpp. I'm able to close the window and clicking force quit but when i list all processes with ps -A the process is still t
-
SAP Query:How to add the following tables
Hi, I want to build a query by joining Tables BSIK, BKPF and BSEG .but when i add BSEG it does not allow to join because its a cluster table. I couldnt find any logical database having these three tables in it. Can you kindly advice how it is achi
-
Cannot open Lightroom 5 download on my 10.8.4 Mac.
Says no application is available. This new Apple version usually requires downloading software through the APP store.
-
ok. let me put this simple: basicaly what i want is to someome of you explain me (like ...to a baby) the procedute to put an applet of my own running, i've read some documentation, but somehow i can't find what i need... 1�Question: do i need to writ