How to print the changed address in delivery output

Dear Gurus,
As all we know the customer address comes in sales order from customer master table or address table and further get copied into delivery also in case of same SP and SH.
My issue is that we do not maintain different SH for a sold to party so SP = SH and there addresses will also be same.
In output we are getting address from ADRC table.
Now if we change the ship to party address in delivery manually and get the output the printed address is unchanged.
But I want to print the changed address in delivery output without changing the masters and maintaining diiferent ship to party.
Please help me how to determine it in print out???
Thanks,
Sanjay

Hi,
I think the logic you have written is wrongly on output.
The logic is like this:
Pass the document number into "VBPA" table.
Execute.
Fetch the address number against "WE(ship-to-party)".
Pass the same address number into "ADRC" table to get the address.
Here you will get the new address which is different from the maaster data.
Regards,
Krishna.

Similar Messages

How to print the GR tag using customised output in TCode MIGO?

Hi All,
I created one customized output type for transaction MB90, it working fine for this transaction. So now my client want same smartform to be used in MIGO transaction. I confirgured same, whenever we post the document in MIGO it should the print the GR tag automatically, its not happening i.e its not prininting the GR tag.
I want to print the GR tag from migo using z-output type. Pls let me know the solution.

Hi,
Please chek the following.
1. Txn. NACE... Choose "ME" and click on "Output Types" ... check in you output types did you maintained the Form (WE01, WE02,WE03)
2. Txn. NACE....Choose "ME" and click on "condition Records"... here maintain the details
Trans./Event Type: WE
Print Version: 1/2/3
Print iten: 6
Med: 1
Dat: 4
Lang: EN
Under Communication maintain the "output Device" and flag "print immedi" and "release output"
SPRO>MM>Inventory Management and Physical Inventory-->Output Determination..
Here maintain the details
1. Maintain Conditions
2. Assign forms and Program
Regards
GK.
Edited by: Gnana Kumar on Nov 11, 2010 11:46 AM

String a = "Hello"; How to print the address of a;

String a = "Hello";
How to print the address of a;

How about the address a points to?Please try to answer the question in reply 1: why?
You can't get the address to which a variable points (except with JNI, but that again begs the question: why?) Also the address can change at any time as garbage collection moves objects around in memory.

Delivery document how to print the BOM Parent and Child items

Hi,
I have a production BOM. In Delivery document how to print the Parent and Child items Item Code and Qty.At the time
of add a delivery document Inventory stock redused only in Parent Item not child item because child item stock already reduced in issue for production.

If you need to print both the BOM Parent and Child items, you have to create your own report. BOM is only for production if it is not Sales type.
Thanks,
Gordon

How to print the file name in sap

Hi All,
I have requirment like,
there is a folder in my local system, inside that folder there are 10 Excel file like file1.xls,file2.xls..............file10.xls
how to print the file name of all these file in SAp like
file1.xls
file2.xls
file3.xls
file4.xls
file10.xls
Appropriate points will be rewarded.
Thanks in Advance
Arun kumar

Hi,
Still you are facing any problem with this code expalin the problem with details , otherwise close this thread.
Use Method cl_gui_frontend_services=>directory_list_files to read file names for a given directory
after reading the files then Use FM : RSPO_SX_OUTPUT_TEXTDATA to create spool from internal table data and print the data.
sample code :
data: desktop_dir type string.
data: ifiles type table of string.
data: xfiles type string.
data: count type i.
data: filepath type string.
call method cl_gui_frontend_services=>get_desktop_directory
changing
 desktop_directory = desktop_dir .
call method cl_gui_cfw=>flush.
call method cl_gui_frontend_services=>directory_list_files
exporting
 directory = desktop_dir
* filter = '*.xls'
 files_only = 'X'
* DIRECTORIES_ONLY =
changing
 file_table = ifiles
 count = count.
DATA : x_name LIKE tsp03d-name,
 x_dest LIKE tsp03d-padest VALUE 'LOCL',
 x_rows LIKE sxpcklsti1-body_num VALUE 0,
 x_startrow LIKE sxpcklsti1-body_start VALUE 1,
 x_pages LIKE rspotype-pages VALUE 1,
 x_pages_1 TYPE p DECIMALS 2,
 x_rqtitle LIKE sxpcklsti1-obj_descr,
 x_rqcopies TYPE i VALUE 1,
 x_rqowner LIKE trdyse01cm-username,
 x_immediate LIKE pri_params-primm VALUE ' ',
 x_rqid LIKE tsp01-rqident,
 i_contents LIKE solisti1 OCCURS 0 WITH HEADER LINE,
 x_pages = 1.
 x_rqowner = sy-uname.
 x_dest = 'LOCL'.
 x_startrow = 1.
 x_rqcopies = 1.
 x_immediate = 'X' .
 CALL FUNCTION 'RSPO_SX_OUTPUT_TEXTDATA'
 EXPORTING
* name = x_name
 dest = x_dest
 rows = x_rows
 startrow = x_startrow
 pages = x_pages
 rqtitle = x_rqtitle
 rqcopies = x_rqcopies
 rqowner = x_rqowner
 immediately = x_immediate
 IMPORTING
 rqid = x_rqid
 TABLES
 text_data = i_contents
 EXCEPTIONS
 name_missing = 1
 name_twice = 2
 not_found = 3
 illegal_layout = 4
 internal_error = 5
 size_mismatch = 6
 OTHERS = 7.
 IF sy-subrc <> 0.
** MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
** WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
 ENDIF.
Regards
Appana
*Reward Points for helpful answers
Message was edited by: L Appana

How to print the components in scrollpane

hi there,
can anyone tell me how to print the scrollpane components, i mean the headers & the main view of the component. i've a scrollpane with the following code and i want to print the components:
JScrollPane pane = new JScrollPane(aTextPane);
pane.setRowHeaderView(aLineNumberComponent);my requirement is i've a editor & lineno component as textpanes and added to scrollpane & when asked to print it should print the lineno component which resides in scrollpane's row header & the editor textpane which is the main view in the scrollpane. how can i achieve this?
i'd would appreciate any suggestions & codes given.
thanx in advance.

After adding/removing components to/from a panel try:
panel.revalidate();
panel.repaint() // sometimes this is also needed, I'm
not sure whyI'm not certain, but I think that panel.revalidate() implicitly calls repaint() only if something actually changed in the layout. If nothing changed, it sees no reason to repaint; hence, if something changed in appearance but not in layout, you have to repaint it yourself.
Or something like that. I'm no expert. ;)

How to print the Actual Check on 1st Page if line items are more for F110_p

Hi,
How to print the Actual Check on 1st page if the line items are more in F110_PRENUM_CHCK script. The standard script is printing at the last page of line items.
I tried using
IF &PAGE& EQ '1 '
/E 545 --> text element
ENDIF
but it is of no use.
Please let me know if anyone knows. Thanks in Advance.

Hi Krishna,
I guess, there is no other possible way to acheive this without modifying the standard driver program. Why because? in you driver program you check window will be called only on the last page... but before you change your driver program give a try like shown below....
Not sure, but give a try... In the first page you will be printing some void check try to replace the code inside the text element of void check with original check and make all the check void... note: in this text element, be sure you write two conditions...
IF &PAGE& = 1.
**PRint all check values..
ELSE.
***Print void values
ENDIF.
Close the thread if your question is answered.
Regards,
Sairam

How to print the Terms and Condition page ine the sap-script

Hi experts,
                         i got the requirement that how to print the Terms and condition page in the script,i have the three pages, having the same main window, in the last of the main window(all three pages) i have called the hard coded text(i.e so10 text), but when i am displaying the output data get printed in the first page but i am getting the second page heading on the top of the terms and condiions page. In all the three pages i have the same main window, if i make change in any window i will affect all the other main windows. so please suggest me how i need to go.HOW TO GET GRID OF THE TEXT ON THE TOP OF THE SECOND PAGE OF THE TERMS AND CONDITONS.
like this i have called in the MAIN WINDOW
/E : LAST ( IN ALL THREE PAGES)
       INCLUDE ZSD_INVOICE_TERMS TEXT OBJECT TEXT LANGUAGE EN.
IN THE TCODE SO10
NEW PAGE TERMS.
1) TERM MS AND CONDITONS TEXT.................................................
FIRST->NEXT, NEXT->NEXT,,   TERMS--->TERMS.

Hi,
1. Create a new page by Name : LAST
2. Identify the text element which will be the last element in the form in the debug mode.
Mostly Ex: SUM, TOTAL, LAST etc.,
3. the page linking should be
First --> Next
Next --> Next
4. In the Text element identified in the step 3.
Write the following code
/: NEW PAGE LAST
/: INCLUDE the standard text created for the terms and conditions in SO10
Check the syntax for the command but the logic will be the same.
It should resolve your problem.

How to set the IP address in L25 Tape library

I try to set the ip address in L25 tape library. But it is not stored in the NVRAM. For that purpose I restart the device. Then all the values are reset. please tell how to set the ip address.

Lylee,
Please take a look at the following links. The first describes how to distribute your application to multiple targets when using shared variables. The others are explaining alternate ways to change the IP address of a controller.
How Do I Distribute a Real-Time Application with Shared Variables to Multiple Users?
http://digital.ni.com/public.nsf/allkb/20C9771687E6BBB3862570E7006C2284?OpenDocument
How Do I Change the IP Address of a RT Series Controller (FieldPoint, cRIO, etc) that is not on the Local Subnet?
http://digital.ni.com/public.nsf/allkb/9F7548F5C781E05586256C75006D8B94?OpenDocument
Real-Time Target System Replication Tool
http://digital.ni.com/public.nsf/allkb/444A6A22A6EC50FB86257213004A878C?OpenDocument
http://digital.ni.com/public.nsf/allkb/DDD15965085446E68625733A00451C7A?OpenDocument
Can I Programmatically Assign an IP Address to My Real-Time Target?

How to print the receipt details both on the console and on receipt

Hi All
In ORPOS, Can anybody know how to print the sale transaction details on receipt and console as well
After configuring with printer we can print only on receipt, if we want both on receipt and console as well
Appreciate your suggestions and ideas
Regards
Ramakrishna

Hi Rama
This would not be any configuration change
You can print receipt in both pinter and console by adding a sysout just before string is sent for printing
Regards
Saurabh
[email protected]

Print the user address in print layout

hi
i need the print the user address in print layout.the address store in OUDG. but i call this field in pld. But its not print anything..please any one give the suggestion
We have the three branches.but using one pld. So the user default address show in pld in automatically changes as per user enter.
Edited by: Isayah.I on Nov 6, 2008 9:53 AM

Hi there,
So you have three branches using only one PLD? If the address is not showing. please try to create a three PLD's for the three company branches, every time the user print a PLD they must choose a PLD assign from them.
Regards,
Clint

How to print the error records and success records in bdc

how to print the number of error records and success records in bdc

hai,
plz refer this program,
Z_130399130271_A
REPORT Z_130399130271_A
 NO STANDARD PAGE HEADING LINE-SIZE 325.
*INCLUDE YVALIDATE.
*include bdcrecx1.
INCLUDE YINCLUDE399.
DATA ITAB LIKE TABLE OF FILE_TABLE WITH HEADER LINE.
PARAMETERS: DATASET(132) LOWER CASE.
DATA : RC TYPE I,
ERR(40) TYPE C,
SUCCESSCNT TYPE I VALUE 0,
FAILCOUNT TYPE I VALUE 0.
 DO NOT CHANGE - the generated data section - DO NOT CHANGE ***
If it is nessesary to change the data section use the rules:
1.) Each definition of a field exists of two lines
2.) The first line shows exactly the comment
 '* data element: ' followed with the data element
 which describes the field.
 If you don't have a data element use the
 comment without a data element name
3.) The second line shows the fieldname of the
 structure, the fieldname must consist of
 a fieldname and optional the character '_' and
 three numbers and the field length in brackets
4.) Each field must be type C.
Generated data section with specific formatting - DO NOT CHANGE ***
DATA: BEGIN OF RECORD OCCURS 0,
data element: LIF16
 LIFNR_001(016),
data element: KTOKK
 KTOKK_002(004),
data element: ANRED
 ANRED_003(015),
data element: NAME1_GP
 NAME1_004(035),
data element: SORTL
 SORTL_005(010),
data element: STRAS_GP
 STRAS_006(035),
data element: PFACH
 PFACH_007(010),
data element: ORT01_GP
 ORT01_008(035),
data element: ORT02_GP
 ORT02_009(035),
data element: LAND1_GP
 LAND1_010(003),
data element: REGIO
 REGIO_011(003),
data element: SPRAS
 SPRAS_012(002),
data element: TELF1
 TELF1_013(016),
data element: TELF2
 TELF2_014(016),
data element: BANKS
 BANKS_01_015(003),
data element: BANKK
 BANKL_01_016(015),
data element: BANKN
 BANKN_01_017(018),
 END OF RECORD.
DATA: BEGIN OF ERRORITAB OCCURS 0,
 LIFNR_001 LIKE LFA1-LIFNR,
 KTOKK_002 LIKE LFA1-KTOKK,
 ANRED_003 LIKE LFA1-ANRED,
 NAME1_004 LIKE LFA1-NAME1,
 SORTL_005 LIKE LFA1-SORTL,
 STRAS_006 LIKE LFA1-STRAS,
 PFACH_007 LIKE LFA1-PFACH,
 ORT01_008 LIKE LFA1-ORT01,
 ORT02_009 LIKE LFA1-ORT02,
 LAND1_010 LIKE LFA1-LAND1,
 REGIO_011 LIKE LFA1-REGIO,
 SPRAS_012 LIKE LFA1-SPRAS,
 TELF1_013 LIKE LFA1-TELF1,
 TELF2_014 LIKE LFA1-TELF2,
 BANKS_01_015 LIKE LFBK-BANKS,
 BANKL_01_016 LIKE LFBK-BANKL,
 BANKN_01_017 LIKE LFBK-BANKN,
 ERRORMSG(60) TYPE C,
 SERIAL TYPE I VALUE '1',
 END OF ERRORITAB.
End generated data section ***
AT SELECTION-SCREEN ON VALUE-REQUEST FOR DATASET.
CALL FUNCTION 'TMP_GUI_FILE_OPEN_DIALOG'
EXPORTING
 WINDOW_TITLE = 'select a file '
 DEFAULT_EXTENSION = 'TXT'
 DEFAULT_FILENAME = 'ASSIGN5.TXT'
FILE_FILTER =
INIT_DIRECTORY =
MULTISELECTION =
IMPORTING
RC =
 TABLES
 FILE_TABLE = ITAB
EXCEPTIONS
 CNTL_ERROR = 1
 OTHERS = 2
IF SY-SUBRC <> 0.
 MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
 WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
READ TABLE ITAB INDEX 1.
DATASET = ITAB-FILENAME.
WRITE DATASET.
START-OF-SELECTION.
*perform open_dataset using dataset.
*perform open_group.
DATA T TYPE STRING.
T = DATASET.
IF T EQ ' '.
 MESSAGE E110(ZX).
ENDIF.
CALL FUNCTION 'GUI_UPLOAD'
 EXPORTING
 FILENAME = T
FILETYPE = 'ASC'
 HAS_FIELD_SEPARATOR = 'X'
HEADER_LENGTH = 0
READ_BY_LINE = 'X'
DAT_MODE = ' '
CODEPAGE = ' '
IGNORE_CERR = ABAP_TRUE
REPLACEMENT = '#'
CHECK_BOM = ' '
IMPORTING
FILELENGTH =
HEADER =
 TABLES
 DATA_TAB = RECORD
EXCEPTIONS
FILE_OPEN_ERROR = 1
FILE_READ_ERROR = 2
NO_BATCH = 3
GUI_REFUSE_FILETRANSFER = 4
INVALID_TYPE = 5
NO_AUTHORITY = 6
UNKNOWN_ERROR = 7
BAD_DATA_FORMAT = 8
HEADER_NOT_ALLOWED = 9
SEPARATOR_NOT_ALLOWED = 10
HEADER_TOO_LONG = 11
UNKNOWN_DP_ERROR = 12
ACCESS_DENIED = 13
DP_OUT_OF_MEMORY = 14
DISK_FULL = 15
DP_TIMEOUT = 16
OTHERS = 17
IF SY-SUBRC <> 0.
 MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
 WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
LOOP AT RECORD.
 CLEAR RC.
 CLEAR ERR.
*read dataset dataset into record.
 IF SY-SUBRC <> 0. EXIT. ENDIF.
 RECORD-KTOKK_002 = '0001'.
 PERFORM BDC_DYNPRO USING 'SAPMF02K' '0100'.
 PERFORM BDC_FIELD USING 'BDC_CURSOR'
 'RF02K-KTOKK'.
 PERFORM BDC_FIELD USING 'BDC_OKCODE'
 '/00'.
 PERFORM BDC_FIELD USING 'RF02K-LIFNR'
 RECORD-LIFNR_001.
 PERFORM BDC_FIELD USING 'RF02K-KTOKK'
 RECORD-KTOKK_002.
 PERFORM BDC_DYNPRO USING 'SAPMF02K' '0110'.
 PERFORM BDC_FIELD USING 'BDC_CURSOR'
 'LFA1-TELX1'.
 PERFORM BDC_FIELD USING 'BDC_OKCODE'
 '/00'.
 PERFORM BDC_FIELD USING 'LFA1-ANRED'
 RECORD-ANRED_003.
 PERFORM BDC_FIELD USING 'LFA1-NAME1'
 RECORD-NAME1_004.
 PERFORM BDC_FIELD USING 'LFA1-SORTL'
 RECORD-SORTL_005.
 PERFORM BDC_FIELD USING 'LFA1-STRAS'
 RECORD-STRAS_006.
 PERFORM BDC_FIELD USING 'LFA1-PFACH'
 RECORD-PFACH_007.
 PERFORM BDC_FIELD USING 'LFA1-ORT01'
 RECORD-ORT01_008.
 PERFORM BDC_FIELD USING 'LFA1-ORT02'
 RECORD-ORT02_009.
 PERFORM BDC_FIELD USING 'LFA1-LAND1'
 RECORD-LAND1_010.
 PERFORM BDC_FIELD USING 'LFA1-REGIO'
 RECORD-REGIO_011.
 PERFORM BDC_FIELD USING 'LFA1-SPRAS'
 RECORD-SPRAS_012.
 PERFORM BDC_FIELD USING 'LFA1-TELF1'
 RECORD-TELF1_013.
 PERFORM BDC_FIELD USING 'LFA1-TELF2'
 RECORD-TELF2_014.
 PERFORM BDC_DYNPRO USING 'SAPMF02K' '0120'.
 PERFORM BDC_FIELD USING 'BDC_CURSOR'
 'LFA1-KUNNR'.
 PERFORM BDC_FIELD USING 'BDC_OKCODE'
 '=VW'.
 PERFORM BDC_DYNPRO USING 'SAPMF02K' '0130'.
 PERFORM BDC_FIELD USING 'BDC_CURSOR'
 'LFBK-BANKN(01)'.
 PERFORM BDC_FIELD USING 'BDC_OKCODE'
 '=ENTR'.
 PERFORM BDC_FIELD USING 'LFBK-BANKS(01)'
 RECORD-BANKS_01_015.
 PERFORM BDC_FIELD USING 'LFBK-BANKL(01)'
 RECORD-BANKL_01_016.
 PERFORM BDC_FIELD USING 'LFBK-BANKN(01)'
 RECORD-BANKN_01_017.
 PERFORM BDC_DYNPRO USING 'SAPMF02K' '0130'.
 PERFORM BDC_FIELD USING 'BDC_CURSOR'
 'LFBK-BANKS(01)'.
 PERFORM BDC_FIELD USING 'BDC_OKCODE'
 '=UPDA'.
 PERFORM BDC_TRANSACTION USING 'XK01' CHANGING ERR RC.
 DATA: SERIAL TYPE I VALUE 1.
 IF RC <> 0.
 FAILCOUNT = FAILCOUNT + 1.
 CLEAR ERRORITAB.
 ERRORITAB-SERIAL = SERIAL.
 ERRORITAB-LIFNR_001 = RECORD-LIFNR_001.
 ERRORITAB-KTOKK_002 = RECORD-KTOKK_002.
 ERRORITAB-ANRED_003 = RECORD-ANRED_003.
 ERRORITAB-NAME1_004 = RECORD-NAME1_004.
 ERRORITAB-SORTL_005 = RECORD-SORTL_005.
 ERRORITAB-STRAS_006 = RECORD-STRAS_006.
 ERRORITAB-PFACH_007 = RECORD-PFACH_007.
 ERRORITAB-ORT01_008 = RECORD-ORT01_008.
 ERRORITAB-ORT02_009 = RECORD-ORT02_009.
 ERRORITAB-LAND1_010 = RECORD-LAND1_010.
 ERRORITAB-REGIO_011 = RECORD-REGIO_011.
 ERRORITAB-SPRAS_012 = RECORD-SPRAS_012.
 ERRORITAB-TELF1_013 = RECORD-TELF1_013.
 ERRORITAB-TELF2_014 = RECORD-TELF2_014.
 ERRORITAB-BANKS_01_015 = RECORD-BANKS_01_015.
 ERRORITAB-BANKL_01_016 = RECORD-BANKL_01_016.
 ERRORITAB-BANKN_01_017 = RECORD-BANKN_01_017.
 ERRORITAB-ERRORMSG = ERR.
 SERIAL = SERIAL + 1.
 APPEND ERRORITAB.
 MODIFY RECORD TRANSPORTING KTOKK_002.
 DELETE RECORD WHERE KTOKK_002 = '0001'.
 ELSE.
 SUCCESSCNT = SUCCESSCNT + 1.
 ENDIF.
ENDLOOP.
display output********************************************************
SKIP.
FORMAT COLOR 5 INTENSIFIED OFF.
WRITE:/ 'No. of records successfully uploaded: '.
FORMAT COLOR 4 INTENSIFIED OFF.
WRITE: SUCCESSCNT.
Displaying the success table******************************************
IF SUCCESSCNT <> 0.
 SKIP.
 FORMAT COLOR 4 INTENSIFIED OFF.
 WRITE:/ 'Successful Records'.
 FORMAT COLOR 7 INTENSIFIED ON.
 WRITE:/(261) SY-ULINE,
 / SY-VLINE,
 'S.NO', 007 SY-VLINE,
 'VENDOR ACC.NUM', 023 SY-VLINE,
 'VENDOR ACC GROUP', 041 SY-VLINE,
 'TITLE', 048 SY-VLINE,
 'VENDOR NAME', 064 SY-VLINE,
 'SORT FIELD', 076 SY-VLINE,
 'HOUSE NO.& STREET', 101 SY-VLINE,
 'PO.BOX NO', 116 SY-VLINE,
 'CITY', 129 SY-VLINE,
 'DISTRICT', 141 SY-VLINE,
 'COUNTRY KEY', 156 SY-VLINE,
 'REGION', 166 SY-VLINE,
 'LANGUAGE KEY', 180 SY-VLINE,
 'TELEPHONE NO 1', 196 SY-VLINE,
 'TELEPHONE NO 2', 213 SY-VLINE,
 'BANK COUNTRY KEY', 231 SY-VLINE,
 'BANK KEY', 241 SY-VLINE,
 'BANK ACC.NO', 261 SY-VLINE,
 /1(261) SY-ULINE.
 FORMAT COLOR 4 INTENSIFIED ON.
 SERIAL = 1.
 SORT RECORD BY LIFNR_001.
 LOOP AT RECORD.
 WRITE:/ SY-VLINE,
 SERIAL LEFT-JUSTIFIED, 007 SY-VLINE,
 RECORD-LIFNR_001(016), 023 SY-VLINE,
 RECORD-KTOKK_002(004), 041 SY-VLINE,
 RECORD-ANRED_003(015), 048 SY-VLINE,
 RECORD-NAME1_004(035), 064 SY-VLINE,
 RECORD-SORTL_005(010), 076 SY-VLINE,
 RECORD-STRAS_006(035), 101 SY-VLINE,
 RECORD-PFACH_007(010), 116 SY-VLINE,
 RECORD-ORT01_008(035), 129 SY-VLINE,
 RECORD-ORT02_009(035), 141 SY-VLINE,
 RECORD-LAND1_010(003), 156 SY-VLINE,
 RECORD-REGIO_011(003), 166 SY-VLINE,
 RECORD-SPRAS_012(002), 180 SY-VLINE,
 RECORD-TELF1_013(016), 196 SY-VLINE,
 RECORD-TELF2_014(016), 213 SY-VLINE,
 RECORD-BANKS_01_015(003), 231 SY-VLINE,
 RECORD-BANKL_01_016(015), 241 SY-VLINE,
 RECORD-BANKN_01_017(018), 261 SY-VLINE.
 WRITE:/(261) SY-ULINE.
 SERIAL = SERIAL + 1.
 ENDLOOP.
 WRITE:/1(261) SY-ULINE.
ENDIF.
SKIP.
FORMAT COLOR 5 INTENSIFIED OFF.
WRITE:/ 'No. of records not uploaded: '.
FORMAT COLOR 4 INTENSIFIED OFF.
WRITE: FAILCOUNT.
*Displaying the error table
IF FAILCOUNT <> 0.
 SKIP.
 FORMAT COLOR 4 INTENSIFIED OFF.
 WRITE:/(320) SY-ULINE,
 'Error Records'.
 FORMAT COLOR 7 INTENSIFIED ON.
 WRITE:/ SY-ULINE, SY-VLINE,
 'S.NO', 007 SY-VLINE,
 'VENDOR ACC.NUM', 023 SY-VLINE,
 'VENDOR ACC GROUP', 041 SY-VLINE,
 'TITLE', 048 SY-VLINE,
 'VENDOR NAME', 064 SY-VLINE,
 'SORT FIELD', 076 SY-VLINE,
 'HOUSE NO.& STREET', 101 SY-VLINE,
 'PO.BOX NO', 116 SY-VLINE,
 'CITY', 129 SY-VLINE,
 'DISTRICT', 141 SY-VLINE,
 'COUNTRY KEY', 156 SY-VLINE,
 'REGION', 166 SY-VLINE,
 'LANGUAGE KEY', 180 SY-VLINE,
 'TELEPHONE NO 1', 196 SY-VLINE,
 'TELEPHONE NO 2', 213 SY-VLINE,
 'BANK COUNTRY KEY', 231 SY-VLINE,
 'BANK KEY', 241 SY-VLINE,
 'BANK ACC.NO', 261 SY-VLINE,
 'ERROR MESSAGE', 320 SY-VLINE.
 WRITE:/(320) SY-ULINE.
 FORMAT COLOR 4 INTENSIFIED ON.
 SORT ERRORITAB BY LIFNR_001.
 LOOP AT ERRORITAB.
 WRITE:/ SY-VLINE,
 ERRORITAB-SERIAL LEFT-JUSTIFIED, 007 SY-VLINE,
 ERRORITAB-LIFNR_001 , 023 SY-VLINE,
 ERRORITAB-KTOKK_002, 041 SY-VLINE,
 ERRORITAB-ANRED_003, 048 SY-VLINE,
 ERRORITAB-NAME1_004, 064 SY-VLINE,
 ERRORITAB-SORTL_005, 076 SY-VLINE,
 ERRORITAB-STRAS_006, 101 SY-VLINE,
 ERRORITAB-PFACH_007, 116 SY-VLINE,
 ERRORITAB-ORT01_008, 129 SY-VLINE,
 ERRORITAB-ORT02_009, 141 SY-VLINE,
 ERRORITAB-LAND1_010, 156 SY-VLINE,
 ERRORITAB-REGIO_011, 166 SY-VLINE,
 ERRORITAB-SPRAS_012, 180 SY-VLINE,
 ERRORITAB-TELF1_013, 196 SY-VLINE,
 ERRORITAB-TELF2_014, 213 SY-VLINE,
 ERRORITAB-BANKS_01_015, 231 SY-VLINE,
 ERRORITAB-BANKL_01_016, 241 SY-VLINE,
 ERRORITAB-BANKN_01_017, 261 SY-VLINE,
 ERRORITAB-ERRORMSG, 320 SY-VLINE.
 WRITE:/(320) SY-ULINE.
 ENDLOOP.
 WRITE:/ SY-ULINE.
ENDIF.
hope this ll help you..
regards,
prema.A

How to see the changed output for purchase order

Hi..
I have zmedruck. i need to increse item text lengh. i done this in editor. how to see the changed output now...I increased the length of text to be displayed. I checked the print preview in me23n. i cant see the increased length. Guide me where i am wrong.
Edited by: Meena 303 on May 1, 2008 6:24 PM

Hi
In ME22N go to message -
> select old message -
>click change OutPut button -
> Save
then see print priview through ME9F or ME22N it sself.
regards
Sachin

How to print the superscript in smartform

Hi gurus,
Please tell me the procedure how to print the superscript in middle of the text displaying?
when we are displaying the smartform its converted to some special character like & .
please let me know procedure at the earliest
Regards
Raj

Hi thanks for ur patience.
see my requirment was to print TM as superscript for HLL ,already smartstyle is there, and also a character format with superscript is also defined.
then aftet HLL how it prints as superscript.
for HLL we are using another character format and for superscript we are using the another character format.
If posiible send me the code to write in smartforms
Regards
RAj
Points are awarded for useful answers.

How to print the script in condensed mode

Hi to all,
Pls help me.
How to print the script in condensed mode and particular window only print in the condensed mode.

Hi,
Hi
It will remove the blank spaces in front of the variable
and if you use the extension NO-GAPS
It will remove all the blank spaces in the variable field.
DATA: ws_val1 type char12.
ws_val1 = ' 100 123'.
Condense ws_val1.
Write / ws_val1.
Condense ws_val1 no-gaps.
write / ws_val1.
It will give output as
100 123
100123
The CONDENSE statement deletes redundant spaces from a string:
CONDENSE c NO-GAPS.
This statement removes any leading blanks in the field c and replaces other sequences of blanks by exactly one blank. The result is a left-justified sequence of words, each separated by one blank. If the addition NO-GAPS is specified, all blanks are removed.
Please check this link for sample code.
http://help.sap.com/saphelp_nw2004s/helpdata/en/fc/eb33e6358411d1829f0000e829fbfe/content.htm
Regards,
Raj.

How to print the changed address in delivery output

Similar Messages

Maybe you are looking for