How to reduce a thickness of rectangle line ?
In Custom Adobe form i want to make a big rectangle box and in that box so many small size rectangle boxes available ,it is looking like drawing lines on big rectangle box(dividing some part ) ,at that time small rectangle boxes lines are overloap with each other ,at that time 2 or 3 small rectangle boxes border lines mix with each other result is that border lines colour are looking thickness but all lines colour thickness must be same.how can i do? That small boxes are has binding .if remove that boxes I loss the some data.how can I solve this problem. please find the attachment.
Hi Howard,
You can achieve this by using Menu. Click on the line then Select in the Menu as follows:-
Format -> Line -> Line Width
Choose appropriate line thickness.
Have a nice day...
Raja Angamuthu B
Similar Messages
-
How to control the thickness of a line
I added a line to a template. The line is a thick line i would like to make it thinner. However i see nothing in the property of the line that will allow me to do this.
howardHi Howard,
You can achieve this by using Menu. Click on the line then Select in the Menu as follows:-
Format -> Line -> Line Width
Choose appropriate line thickness.
Have a nice day...
Raja Angamuthu B -
How to reduce microsim thickness to fit iphone 5, How to reduce microsim thickness to fit iphone 5
Hi,
I have just preordered my simlockfree Iphone 5 in Germany. Since it comes with a nanosim I need to find a way to reduce the microsim thickness by 0.09mm to fit the iphone 5. My current provider Congstar Germany will only supply its customers with a nanosim in January 2013. Obviously I wanna start using my iphone 5 way before that. Any tips. Thanks.Sandpaper.
-
How to set a default colour & thickness for rectangle in preview?
How to set a default colour & thickness for rectangle(annotation) in preview ? Because every time that I choose for example red and thickness 1 it reverts to orange and 3 next time .
Doesn't appear to be a default setting. Peruse the webpage for Secrets at http://secrets.blacktree.com/ for a possible setting.
-
How to reduce the length of lines in Smartform windows
Hi,
In smartform Mainwindow or any window, how to draw the vertical lines and horizontal lines and how to reduce the lengths...very urgent please explain.
Thanks and Regards,
suryaHi Surya,
You should use templates for this purpose.
and if you are in table then you can not use templates. Here you should go for the line type.
and in either case there will be pattern tab in the right side bottom.
if double click on the teplate it will get display.
click on the select pattern and select the required format and give the line width
ex 15 TW
I think this will help you -
Re: settings -- how to reduce waste space at top of page to one line only
I find that the wide screens are too short so it seems like more scolling is needed since less of web page is viewable and this problem is made worse by waste space taken up by various lines - for example on my firefox page, there is a blue line at the top that currently says "ask a question" Firefox help etc and then the rest of the line is blank -- about 70% of space not used/needed
The second line down shows: File, Edit, View, History, Bookmarks, Tools, Help -- then about 70%waste space -- rest of line is blank -- How can we put stuff from various lines into one or two lines Max ?
To continue, in my case, the next line has a couple of tabs -- this is useful -- maybe if there could be an easy way to show tabs in their own line when lots of various pages need to be open but when need max space viewable below to click a dropdown to push tabs up to end of next line above (in the waste space)
Finally, my page has the 4th line taken up by the Forward and Back arrows, the web address line, and then a shorter box called iLivid Web Search with a magnifying glass and then a little box at the end of a house -- which I use all the time to go to my home page for new tabs opened
I think it would be cool if we could easily elim all but the blue line and one more line by pushing stuff in line 3 and 4 up into line 1 (blue line) and line 2
My much older IE version had a feature you could drag the lines up they would do what I am saying with all the lines except the blue line at the top -- then when it compressed thje info, it would just show part of title and then a little // sort of button to click to see or expand a part of the line to read it all if needed
It seems likely this has mostly been solved but I can not seem to figure how to use the settting and buttons on my firefox page to accomplish these changes easily back and forth
From my looking at it, these features need to be available when you right click on each line but maybe my version8 is not set up quite right
so any and all assistance is greatly appreciated
Cheers, GFound settings in on the Layout tab of the page and changed the top px from 32 to 10.
Stunpals - Disclaimer: This posting is provided "AS IS" with no warranties. -
How can I change the thickness of a line in a Picture object?
I want to change the thickness of the line in a Polar Plot. I can easy change the color but not the thickness of the line displaying the data. I have seen that the 'polar Plot' function use the 'Draw Line' function of the 'Picture Functions'. Do you have a solution? Thanks in advance.
Hi Jean-Michel,
If you dig down a few levels from the top-level Polar Plot VI, you will find vi.lib\picture\polarplt.llb\Plot Polar Data.vi. Inside this VI is a VI called "Draw Multiple Lines.vi", which has a "pen" input. This input is currently not wired, so it defaults to a line style of "Solid", and a width of "1". If you take this input and propogate it all the way up to the top-level Polar Plot VI, you can now specify the line width and style of your polar plot.
I have submitted this as a suggestion, so perhaps we will see it in a future version of LabVIEW.
-D
Darren Nattinger, CLA
LabVIEW Artisan and Nugget Penman -
How to identify Path is a Arc,Line, Rectangle, etc
I am using DLE API for Images extraction,
GIS images contains Layer basis,
It extract Raster image sucessfully, and other images show as a Path.
May i get some info regarding to identify Path has Arc,Rectangle,Line,curve...Thanks All,
yes exactly its knows about lines,rectangles and curve.
I can create different structure of Path using addCurve(), addLine(Point Point) , addRect(Point Point, double Width, double Height) .......... APIs
now i want extract all those Path co-ordinate or Point and identify which is rectangle, Line , curve.......
I had lot of algorithmic analysis on the data.
but unable to identify........
Please may i get any clue...... -
How to reduce memory use on my iMac
How to reduce memory use on my iMac, OS X Yosemite, 2.7 GHz Intel Core i5
8 GB memory
Running very slowly, and the little spinning ball showing up.
How do I clean up my IMac please?
Should I use MacKeep or any clean up apps?When you see a beachball cursor or the slowness is especially bad, note the exact time: hour, minute, second.
These instructions must be carried out as an administrator. If you have only one user account, you are the administrator.
Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad and start typing the name.
The title of the Console window should be All Messages. If it isn't, select
SYSTEM LOG QUERIES ▹ All Messages
from the log list on the left. If you don't see that list, select
View ▹ Show Log List
from the menu bar at the top of the screen.
Each message in the log begins with the date and time when it was entered. Scroll back to the time you noted above.
Select the messages entered from then until the end of the episode, or until they start to repeat, whichever comes first.
Copy the messages to the Clipboard by pressing the key combination command-C. Paste into a reply to this message by pressing command-V.
The log contains a vast amount of information, almost all of it useless for solving any particular problem. When posting a log extract, be selective. A few dozen lines are almost always more than enough.
Please don't indiscriminately dump thousands of lines from the log into this discussion.
Please don't post screenshots of log messages—post the text.
Some private information, such as your name, may appear in the log. Anonymize before posting. -
How to reduce performance time.
Hi,
Any body guide me how to reduce performance time for this report.
Its taking to much time for execution.
*& Report ZEOU_CST_CLAIM_REP *
REPORT zeou_cst_claim_rep.
*& Program Name : ZEOU_CST_CLAIM_REP *
*& Title : CST Claim Report *
*& Module Name : EOU *
*& Author : Chandra Vangoor *
*& Create Date : 05.05.2006 *
*& Logical DB : None *
*& Program Type : On-Line. *
*& SAP Release : 4.7 *
*& Description : *
*& Log Date Author Reason of change
TABLES
TABLES : a363,
mara,
marc,
makt,
ekko,
ekpo,
mkpf,
mseg,
konp,
konh.
SELECTION-SCREEN
SELECTION-SCREEN : BEGIN OF BLOCK cst WITH FRAME TITLE text-001.
SELECT-OPTIONS : s_matnr FOR mara-matnr, "Material Number
s_lifnr FOR ekko-lifnr, "Account Number of the Vendor
s_bedat FOR ekko-bedat, "Purchasing Document Date
s_kschl FOR konh-kschl OBLIGATORY NO INTERVALS, "Condition type
s_bwart FOR mseg-bwart OBLIGATORY NO INTERVALS. "Movement Type (Inventory Management)
PARAMETERS : p_werks LIKE marc-werks OBLIGATORY. "Plant
SELECTION-SCREEN : END OF BLOCK cst.
INCLUDES
INCLUDE zalv_data.
DATA - INTERNAL TABLES AND FIELD LISTS
DATA : BEGIN OF a363_itab OCCURS 0,
matnr LIKE a363-matnr, "Material Number
lifnr LIKE a363-lifnr, "Account Number of the Vendor
werks LIKE a363-werks, "Plant
kschl LIKE a363-kschl, "Condition type
knumh LIKE a363-knumh, "Condition record number
kbetr LIKE konp-kbetr, "Rate (condition amount or percentage) where no scale exists
END OF a363_itab.
DATA : BEGIN OF konp_itab OCCURS 0,
knumh LIKE a363-knumh, "Condition record number
kbetr LIKE konp-kbetr, "Rate (condition amount or percentage) where no scale exists
lifnr LIKE a363-lifnr, "Account Number of the Vendor
END OF konp_itab.
DATA : BEGIN OF ekko_itab OCCURS 0,
ebeln LIKE ekko-ebeln, "Purchasing Document Number
lifnr LIKE ekko-lifnr, "Account Number of the Vendor
bedat LIKE ekko-bedat, "Purchasing Document Date
END OF ekko_itab.
DATA : BEGIN OF ekpo_itab OCCURS 0,
ebeln LIKE ekpo-ebeln, "Purchasing Document Number
ebelp LIKE ekpo-ebelp, "Item Number of Purchasing Document
matnr LIKE ekpo-matnr, "Material Number
werks LIKE ekpo-werks, "Plant
menge LIKE ekpo-menge, "Purchase order quantity
END OF ekpo_itab.
DATA : BEGIN OF v_po_det OCCURS 0, "VENDOR + PLANT + PO DEATILS
lifnr LIKE ekko-lifnr, "Account Number of the Vendor
ebeln LIKE ekko-ebeln, "Purchasing Document Number
ebelp LIKE ekpo-ebelp, "Item Number of Purchasing Document
bedat LIKE ekko-bedat, "Purchasing Document Date
matnr LIKE ekpo-matnr, "Material Number
werks LIKE ekpo-werks, "Plant
menge LIKE ekpo-menge, "Purchase order quantity
kbetr LIKE konp-kbetr, "Rate (condition amount or percentage) where no scale exists
END OF v_po_det.
DATA : BEGIN OF mseg_itab OCCURS 0,
mblnr LIKE mseg-mblnr, "Number of Material Document
ebeln LIKE mseg-ebeln, "Purchasing Document Number
ebelp LIKE mseg-ebelp, "Item Number of Purchasing Document
matnr LIKE mseg-matnr, "Material Number
lifnr LIKE mseg-lifnr, "Account Number of the Vendor
werks LIKE mseg-werks, "Plant
menge LIKE mseg-menge, "Quantity
dmbtr LIKE mseg-dmbtr, "Amount in local currency
bwart LIKE mseg-bwart, "Movement Type (Inventory Management)
END OF mseg_itab.
DATA : BEGIN OF mkpf_itab OCCURS 0,
mblnr LIKE mkpf-mblnr, "Number of Material Document
bldat LIKE mkpf-bldat, "Document Date in Document
END OF mkpf_itab.
DATA : BEGIN OF zeou_pcrdtl_itab OCCURS 0,
matnr LIKE zeou_pcrdtl-matnr, "Material Number
lifnr LIKE zeou_pcrdtl-lifnr, "Account Number of the Vendor
mblnr LIKE zeou_pcrdtl-mblnr, "Number of Material Document
whssn LIKE zeou_pcrdtl-whssn, "Warehouse Records Entry Serial No.
whsdt LIKE zeou_pcrdtl-whsdt, "Warehouse Records Entry date
END OF zeou_pcrdtl_itab.
DATA : BEGIN OF gr_wh_info OCCURS 0, "INFO OF GR & WH BASED ON MVMT TYPE & PO
mblnr LIKE mseg-mblnr, "Number of Material Document
bldat LIKE mkpf-bldat, "Document Date in Document
ebeln LIKE mseg-ebeln, "Purchasing Document Number
ebelp LIKE ekpo-ebelp, "Item Number of Purchasing Document
matnr LIKE mseg-matnr, "Material Number
lifnr LIKE mseg-lifnr, "Account Number of the Vendor
werks LIKE mseg-werks, "Plant
menge LIKE mseg-menge, "Quantity
dmbtr LIKE mseg-dmbtr, "Amount in local currency
bwart LIKE mseg-bwart, "Movement Type (Inventory Management)
whssn LIKE zeou_pcrdtl-whssn, "Warehouse Records Entry Serial No.
whsdt LIKE zeou_pcrdtl-whsdt, "Warehouse Records Entry date
END OF gr_wh_info.
DATA : BEGIN OF bseg_itab OCCURS 0,
ebeln LIKE bseg-ebeln, "Purchasing Document Number
ebelp LIKE bseg-ebelp, "Item Number of Purchasing Document
matnr LIKE bseg-matnr, "Material Number
lifnr LIKE bseg-lifnr, "Account Number of the Vendor
werks LIKE bseg-werks, "Plant
buzid LIKE bseg-buzid, "Identification of the Line Item
bschl LIKE bseg-bschl, "Posting Key
wrbtr LIKE bseg-wrbtr, "Amount in document currency
bukrs LIKE bseg-bukrs, "Company Code
belnr LIKE bseg-belnr, "Accounting Document Number
gjahr LIKE bseg-gjahr, "Fiscal Year
END OF bseg_itab.
DATA : BEGIN OF bkpf_itab OCCURS 0,
bukrs LIKE bkpf-bukrs, "Company Code
belnr LIKE bkpf-belnr, "Accounting Document Number
gjahr LIKE bkpf-gjahr, "Fiscal Year
xblnr LIKE bkpf-xblnr, "Reference Document Number
bldat LIKE bkpf-bldat, "Document Date in Document
END OF bkpf_itab.
DATA : BEGIN OF vend_inv OCCURS 0, "VENDOR INVOICE DETAILS
ebeln LIKE bseg-ebeln, "Purchasing Document Number
ebelp LIKE bseg-ebelp, "Item Number of Purchasing Document
matnr LIKE bseg-matnr, "Material Number
lifnr LIKE bseg-lifnr, "Account Number of the Vendor
werks LIKE bseg-werks, "Plant
buzid LIKE bseg-buzid, "Identification of the Line Item
bschl LIKE bseg-bschl, "Posting Key
wrbtr LIKE bseg-wrbtr, "Amount in document currency
bukrs LIKE bseg-bukrs, "Company Code
belnr LIKE bseg-belnr, "Accounting Document Number
gjahr LIKE bseg-gjahr, "Fiscal Year
xblnr LIKE bkpf-xblnr, "Reference Document Number
bldat LIKE bkpf-bldat, "Document Date in Document
END OF vend_inv.
DATA : BEGIN OF chckinit OCCURS 0, "CHEQUE INIT INFO
ebeln LIKE bseg-ebeln, "Purchasing Document Number
ebelp LIKE bseg-ebelp, "Item Number of Purchasing Document
matnr LIKE bseg-matnr, "Material Number
lifnr LIKE bseg-lifnr, "Account Number of the Vendor
werks LIKE bseg-werks, "Plant
buzid LIKE bseg-buzid, "Identification of the Line Item
bschl LIKE bseg-bschl, "Posting Key
bukrs LIKE bkpf-bukrs, "Company Code
belnr LIKE bkpf-belnr, "Accounting Document Number
gjahr LIKE bkpf-gjahr, "Fiscal Year
koart LIKE bseg-koart, "Account type
augbl LIKE bseg-augbl, "Document Number of the Clearing Document
END OF chckinit.
DATA : BEGIN OF chckpayer OCCURS 0, "CHEQUE BANK DETAILS
vblnr LIKE payr-vblnr, "Document Number of the Payment Document
zbukr LIKE payr-zbukr, "Paying company code
gjahr LIKE payr-gjahr, "Fiscal Year
chect LIKE payr-chect, "Check Number
zaldt LIKE payr-zaldt, "Probable Payment Date (Cash Discount 1 Due)
hbkid LIKE payr-hbkid, "Short key for a house bank
END OF chckpayer.
DATA : chckpayer_u LIKE chckpayer OCCURS 0 WITH HEADER LINE. "UNIQUE CHEQUE DETAILS
DATA : BEGIN OF chckfinal OCCURS 0, "CHEQUE FINAL INFO
ebeln LIKE bseg-ebeln, "Purchasing Document Number
ebelp LIKE bseg-ebelp, "Item Number of Purchasing Document
matnr LIKE bseg-matnr, "Material Number
lifnr LIKE bseg-lifnr, "Account Number of the Vendor
werks LIKE bseg-werks, "Plant
buzid LIKE bseg-buzid, "Identification of the Line Item
bschl LIKE bseg-bschl, "Posting Key
bukrs LIKE bkpf-bukrs, "Company Code
belnr LIKE bkpf-belnr, "Accounting Document Number
gjahr LIKE bkpf-gjahr, "Fiscal Year
koart LIKE bseg-koart, "Account type
augbl LIKE bseg-augbl, "Document Number of the Clearing Document
vblnr LIKE payr-vblnr, "Document Number of the Payment Document
zbukr LIKE payr-zbukr, "Paying company code
chect LIKE payr-chect, "Check Number
zaldt LIKE payr-zaldt, "Probable Payment Date (Cash Discount 1 Due)
hbkid LIKE payr-hbkid, "Short key for a house bank
END OF chckfinal.
DATA : BEGIN OF mat_desc OCCURS 0,
matnr LIKE mara-matnr,
maktx LIKE makt-maktx,
END OF mat_desc.
DATA : BEGIN OF vend_det OCCURS 0,
lifnr LIKE lfa1-lifnr,
name1 LIKE lfa1-name1,
j_1icstno LIKE j_1imovend-j_1icstno,
END OF vend_det.
DATA : BEGIN OF cst_rep OCCURS 0, "FINAL CST REPORT
lifnr LIKE a363-lifnr, "Account Number of the Vendor
name1 LIKE lfa1-name1, "Vendor Name
j_1icstno LIKE j_1imovend-j_1icstno, " Vendor CST No.
werks LIKE a363-werks, "Plant
kschl LIKE a363-kschl, "Condition type
ebeln LIKE ekko-ebeln, "Purchasing Document Number
ebelp LIKE ekpo-ebelp, "Item Number of Purchasing Document
bedat LIKE ekko-bedat, "Purchasing Document Date
matnr LIKE ekpo-matnr, "Material Number
maktx LIKE makt-maktx, "Material Description.
kbetr LIKE konp-kbetr, "Rate (condition amount or percentage) where no scale exists
mblnr LIKE mseg-mblnr, "Number of Material Document
bldat LIKE mkpf-bldat, "Document Date in Document
menge LIKE mseg-menge, "Quantity
dmbtr LIKE mseg-dmbtr, "Amount in local currency
cst_dmbtr LIKE mseg-dmbtr, "CST Amount in local currency
bwart LIKE mseg-bwart, "Movement Type (Inventory Management)
whssn LIKE zeou_pcrdtl-whssn, "Warehouse Records Entry Serial No.
whsdt LIKE zeou_pcrdtl-whsdt, "Warehouse Records Entry date
buzid LIKE bseg-buzid, "Identification of the Line Item
bschl LIKE bseg-bschl, "Posting Key
wrbtr LIKE bseg-wrbtr, "Amount in document currency
cst_wrbtr LIKE bseg-wrbtr, "CST Amount in document currency
belnr LIKE bseg-belnr, "Accounting Document Number
gjahr LIKE bseg-gjahr, "Fiscal Year
xblnr LIKE bkpf-xblnr, "Reference Document Number
koart LIKE bseg-koart, "Account type
augbl LIKE bseg-augbl, "Document Number of the Clearing Document
vblnr LIKE payr-vblnr, "Document Number of the Payment Document
zbukr LIKE payr-zbukr, "Paying company code
chect LIKE payr-chect, "Check Number
zaldt LIKE payr-zaldt, "Probable Payment Date (Cash Discount 1 Due)
hbkid LIKE payr-hbkid, "Short key for a house bank
END OF cst_rep.
DATA : BEGIN OF gt_output OCCURS 0, "ALV OUTPUT
slno LIKE sy-tabix, "Serial Number
lifnr LIKE a363-lifnr, "Account Number of the Vendor
name1 LIKE lfa1-name1, "Vendor Name
j_1icstno LIKE j_1imovend-j_1icstno, " Vendor CST No.
werks LIKE a363-werks, "Plant
kschl LIKE a363-kschl, "Condition type
ebeln LIKE ekko-ebeln, "Purchasing Document Number
ebelp LIKE ekpo-ebelp, "Item Number of Purchasing Document
bedat LIKE ekko-bedat, "Purchasing Document Date
matnr LIKE ekpo-matnr, "Material Number
maktx LIKE makt-maktx, "Material Description
mblnr LIKE mseg-mblnr, "Number of Material Document
bldat LIKE mkpf-bldat, "Document Date in Document
menge LIKE mseg-menge, "Quantity
dmbtr LIKE mseg-dmbtr, "Amount in local currency
cst_dmbtr LIKE mseg-dmbtr, "CST Amount in local currency
bwart LIKE mseg-bwart, "Movement Type (Inventory Management)
whssn LIKE zeou_pcrdtl-whssn, "Warehouse Records Entry Serial No.
whsdt LIKE zeou_pcrdtl-whsdt, "Warehouse Records Entry date
buzid LIKE bseg-buzid, "Identification of the Line Item
bschl LIKE bseg-bschl, "Posting Key
wrbtr LIKE bseg-wrbtr, "Amount in document currency
cst_wrbtr LIKE bseg-wrbtr, "CST Amount in document currency
belnr LIKE bseg-belnr, "Accounting Document Number
gjahr LIKE bseg-gjahr, "Fiscal Year
xblnr LIKE bkpf-xblnr, "Reference Document Number
koart LIKE bseg-koart, "Account type
augbl LIKE bseg-augbl, "Document Number of the Clearing Document
vblnr LIKE payr-vblnr, "Document Number of the Payment Document
zbukr LIKE payr-zbukr, "Paying company code
chect LIKE payr-chect, "Check Number
zaldt LIKE payr-zaldt, "Probable Payment Date (Cash Discount 1 Due)
hbkid LIKE payr-hbkid, "Short key for a house bank
usr_txt1(20) TYPE c,
usr_txt2(20) TYPE c,
END OF gt_output.
*Working Variables
DATA : cst_gr LIKE mseg-dmbtr,
cst_inv LIKE bseg-wrbtr,
usr_txt1(20) TYPE c,
usr_txt2(20) TYPE c.
START-OF-SELECTION.
*Retreiving Data from a363 table for the given input
SELECT matnr
lifnr
werks
kschl
knumh
FROM a363
INTO TABLE a363_itab
WHERE matnr IN s_matnr AND lifnr IN s_lifnr AND werks EQ p_werks AND kschl IN s_kschl.
*rakesh ***************************
SELECT *
FROM konp
INTO CORRESPONDING FIELDS OF TABLE konp_itab
FOR ALL ENTRIES IN a363_itab
WHERE knumh EQ a363_itab-knumh.
IF a363_itab[] IS NOT INITIAL.
SELECT knumh
kbetr
lifnr
FROM konp INTO TABLE konp_itab
FOR ALL ENTRIES IN a363_itab
WHERE knumh EQ a363_itab-knumh.
ENDIF.
LOOP AT a363_itab.
READ TABLE konp_itab WITH KEY knumh = a363_itab-knumh.
IF sy-subrc EQ 0.
MOVE : konp_itab-kbetr TO a363_itab-kbetr.
MODIFY a363_itab.
ENDIF.
CLEAR : a363_itab, konp_itab.
ENDLOOP.
rakesh****************************
SELECT *
FROM makt
INTO CORRESPONDING FIELDS OF TABLE mat_desc
FOR ALL ENTRIES IN a363_itab
WHERE matnr EQ a363_itab-matnr.
SELECT matnr
maktx
FROM makt INTO TABLE mat_desc
FOR ALL ENTRIES IN a363_itab
WHERE matnr EQ a363_itab-matnr.
SELECT a~lifnr
a~name1
b~j_1icstno
INTO TABLE vend_det
FROM lfa1 AS a JOIN j_1imovend AS b
ON alifnr EQ blifnr
FOR ALL ENTRIES IN a363_itab
WHERE a~lifnr EQ a363_itab-lifnr.
Retreiving Data from EKKO & EKPO table for the given input
And Populating the V_PO_DETAILS itab
SELECT *
FROM ekko
INTO CORRESPONDING FIELDS OF TABLE ekko_itab
FOR ALL ENTRIES IN a363_itab
WHERE lifnr EQ a363_itab-lifnr AND bedat IN s_bedat.
IF a363_itab[] IS NOT INITIAL.
SELECT ebeln
lifnr
bedat
FROM ekko INTO TABLE ekko_itab
FOR ALL ENTRIES IN a363_itab
WHERE lifnr EQ a363_itab-lifnr AND bedat IN s_bedat.
ENDIF.
SELECT *
FROM ekpo
INTO CORRESPONDING FIELDS OF TABLE ekpo_itab
FOR ALL ENTRIES IN a363_itab
WHERE matnr EQ a363_itab-matnr AND werks EQ a363_itab-werks AND mwskz NE 'V0'.
IF a363_itab[] IS NOT INITIAL.
SELECT ebeln
ebelp
matnr
werks
menge
FROM ekpo INTO TABLE ekpo_itab
FOR ALL ENTRIES IN a363_itab
WHERE matnr EQ a363_itab-matnr AND werks EQ a363_itab-werks AND mwskz NE 'V0'.
ENDIF.
LOOP AT ekpo_itab.
MOVE : ekpo_itab-ebelp TO v_po_det-ebelp,
ekpo_itab-matnr TO v_po_det-matnr,
ekpo_itab-werks TO v_po_det-werks,
ekpo_itab-menge TO v_po_det-menge.
READ TABLE ekko_itab WITH KEY ebeln = ekpo_itab-ebeln.
IF sy-subrc EQ 0.
MOVE : ekko_itab-lifnr TO v_po_det-lifnr,
ekko_itab-ebeln TO v_po_det-ebeln,
ekko_itab-bedat TO v_po_det-bedat.
APPEND : v_po_det.
ENDIF.
CLEAR : ekko_itab, ekpo_itab, v_po_det.
ENDLOOP.
LOOP AT v_po_det.
READ TABLE a363_itab WITH KEY matnr = v_po_det-matnr lifnr = v_po_det-lifnr werks = v_po_det-werks.
IF sy-subrc EQ 0.
MOVE : a363_itab-kbetr TO v_po_det-kbetr.
MODIFY v_po_det.
ENDIF.
CLEAR : a363_itab, v_po_det.
ENDLOOP.
Retreiving Data from MKPF & MSEG & ZEOU_PCRDTL table for the given input
And Populating the GR_WH_info itab
SELECT *
FROM mseg
INTO CORRESPONDING FIELDS OF TABLE mseg_itab
FOR ALL ENTRIES IN v_po_det
WHERE ebeln EQ v_po_det-ebeln AND matnr EQ v_po_det-matnr AND bwart IN s_bwart.
IF v_po_det[] IS NOT INITIAL.
SELECT mblnr
ebeln
ebelp
matnr
lifnr
werks
menge
dmbtr
bwart
FROM mseg INTO TABLE mseg_itab
FOR ALL ENTRIES IN v_po_det
WHERE ebeln EQ v_po_det-ebeln AND matnr EQ v_po_det-matnr AND bwart IN s_bwart.
ENDIF.
IF mseg_itab[] IS NOT INITIAL.
SELECT *
FROM mkpf
INTO CORRESPONDING FIELDS OF TABLE mkpf_itab
FOR ALL ENTRIES IN mseg_itab
WHERE mblnr EQ mseg_itab-mblnr.
SELECT mblnr
bldat
FROM mkpf INTO TABLE mkpf_itab
FOR ALL ENTRIES IN mseg_itab
WHERE mblnr EQ mseg_itab-mblnr.
SELECT *
FROM zeou_pcrdtl
INTO CORRESPONDING FIELDS OF TABLE zeou_pcrdtl_itab
FOR ALL ENTRIES IN mseg_itab
WHERE mblnr EQ mseg_itab-mblnr AND matnr EQ mseg_itab-matnr.
SELECT matnr
lifnr
mblnr
whssn
whsdt
FROM zeou_pcrdtl INTO TABLE zeou_pcrdtl_itab
FOR ALL ENTRIES IN mseg_itab
WHERE mblnr EQ mseg_itab-mblnr AND matnr EQ mseg_itab-matnr.
ENDIF.
LOOP AT mseg_itab.
MOVE : mseg_itab-mblnr TO gr_wh_info-mblnr,
mseg_itab-ebeln TO gr_wh_info-ebeln,
mseg_itab-ebelp TO gr_wh_info-ebelp,
mseg_itab-matnr TO gr_wh_info-matnr,
mseg_itab-lifnr TO gr_wh_info-lifnr,
mseg_itab-werks TO gr_wh_info-werks,
mseg_itab-menge TO gr_wh_info-menge,
mseg_itab-dmbtr TO gr_wh_info-dmbtr,
mseg_itab-bwart TO gr_wh_info-bwart.
READ TABLE mkpf_itab WITH KEY mblnr = mseg_itab-mblnr.
IF sy-subrc EQ 0.
MOVE : mkpf_itab-bldat TO gr_wh_info-bldat.
ENDIF.
READ TABLE zeou_pcrdtl_itab WITH KEY mblnr = mseg_itab-mblnr.
IF sy-subrc EQ 0.
MOVE : zeou_pcrdtl_itab-whssn TO gr_wh_info-whssn,
zeou_pcrdtl_itab-whsdt TO gr_wh_info-whsdt.
ENDIF.
APPEND : gr_wh_info.
CLEAR : mseg_itab, mkpf_itab, gr_wh_info.
ENDLOOP.
Retreiving Data from BSEG & BKPF table
And Populating the Vendor Invoice Details
IF v_po_det[] IS NOT INITIAL.
SELECT *
FROM bseg
INTO CORRESPONDING FIELDS OF TABLE bseg_itab
FOR ALL ENTRIES IN v_po_det
WHERE ebeln EQ v_po_det-ebeln AND matnr EQ v_po_det-matnr AND buzid EQ 'W' AND bschl EQ '96'.
SELECT ebeln
ebelp
matnr
lifnr
werks
buzid
bschl
wrbtr
bukrs
belnr
gjahr
FROM bseg INTO TABLE bseg_itab
FOR ALL ENTRIES IN v_po_det
WHERE ebeln EQ v_po_det-ebeln AND matnr EQ v_po_det-matnr AND buzid EQ 'W' AND bschl EQ '96'.
ENDIF.
IF bseg_itab[] IS NOT INITIAL.
SELECT *
FROM bkpf
INTO CORRESPONDING FIELDS OF TABLE bkpf_itab
FOR ALL ENTRIES IN bseg_itab
WHERE bukrs EQ bseg_itab-bukrs AND belnr EQ bseg_itab-belnr AND gjahr EQ bseg_itab-gjahr.
SELECT bukrs
belnr
gjahr
xblnr
bldat
FROM bkpf INTO TABLE bkpf_itab
FOR ALL ENTRIES IN bseg_itab
WHERE bukrs EQ bseg_itab-bukrs AND belnr EQ bseg_itab-belnr AND gjahr EQ bseg_itab-gjahr.
ENDIF.
LOOP AT bseg_itab.
MOVE : bseg_itab-ebeln TO vend_inv-ebeln,
bseg_itab-ebelp TO vend_inv-ebelp,
bseg_itab-matnr TO vend_inv-matnr,
bseg_itab-lifnr TO vend_inv-lifnr,
bseg_itab-werks TO vend_inv-werks,
bseg_itab-buzid TO vend_inv-buzid,
bseg_itab-bschl TO vend_inv-bschl,
bseg_itab-wrbtr TO vend_inv-wrbtr,
bseg_itab-bukrs TO vend_inv-bukrs,
bseg_itab-belnr TO vend_inv-belnr,
bseg_itab-gjahr TO vend_inv-gjahr.
READ TABLE bkpf_itab WITH KEY bukrs = bseg_itab-bukrs belnr = bseg_itab-belnr gjahr = bseg_itab-gjahr.
IF sy-subrc EQ 0.
MOVE : bkpf_itab-xblnr TO vend_inv-xblnr,
bkpf_itab-bldat TO vend_inv-bldat.
APPEND : vend_inv.
ENDIF.
CLEAR : vend_inv, bseg_itab, bkpf_itab.
ENDLOOP.
Retreiving Data from BSEG & BKPF table
And Populating the Cheque Info Details
IF v_po_det[] IS NOT INITIAL.
SELECT *
FROM bseg
INTO CORRESPONDING FIELDS OF TABLE chckinit
FOR ALL ENTRIES IN v_po_det
WHERE ebeln EQ v_po_det-ebeln AND matnr EQ v_po_det-matnr AND buzid EQ 'W' AND bschl EQ '86' AND koart EQ 'K'.
SELECT ebeln
ebelp
matnr
lifnr
werks
buzid
bschl
bukrs
belnr
gjahr
koart
augbl
FROM bseg INTO TABLE chckinit
FOR ALL ENTRIES IN v_po_det
WHERE ebeln EQ v_po_det-ebeln AND matnr EQ v_po_det-matnr AND buzid EQ 'W' AND bschl EQ '86' AND koart EQ 'K'.
ENDIF.
IF chckinit[] IS NOT INITIAL.
SELECT *
FROM payr
INTO CORRESPONDING FIELDS OF TABLE chckpayer
FOR ALL ENTRIES IN chckinit
WHERE vblnr EQ chckinit-augbl.
SELECT vblnr
zbukr
gjahr
chect
zaldt
hbkid
FROM payr INTO TABLE chckpayer
FOR ALL ENTRIES IN chckinit
WHERE vblnr EQ chckinit-augbl.
ENDIF.
SORT chckpayer BY vblnr DESCENDING.
LOOP AT chckpayer.
ON CHANGE OF chckpayer-vblnr.
MOVE : chckpayer TO chckpayer_u.
APPEND : chckpayer_u.
CLEAR : chckpayer_u, chckpayer.
ENDON.
ENDLOOP.
LOOP AT chckinit.
MOVE : chckinit-ebeln TO chckfinal-ebeln,
chckinit-ebelp TO chckfinal-ebelp,
chckinit-matnr TO chckfinal-matnr,
chckinit-lifnr TO chckfinal-lifnr,
chckinit-werks TO chckfinal-werks,
chckinit-buzid TO chckfinal-buzid,
chckinit-bschl TO chckfinal-bschl,
chckinit-bukrs TO chckfinal-bukrs,
chckinit-gjahr TO chckfinal-gjahr,
chckinit-koart TO chckfinal-koart,
chckinit-augbl TO chckfinal-augbl.
READ TABLE chckpayer_u WITH KEY vblnr = chckinit-augbl gjahr = chckinit-gjahr.
IF sy-subrc EQ 0.
MOVE : chckpayer_u-vblnr TO chckfinal-vblnr,
chckpayer_u-zbukr TO chckfinal-zbukr,
chckpayer_u-chect TO chckfinal-chect,
chckpayer_u-zaldt TO chckfinal-zaldt,
chckpayer_u-hbkid TO chckfinal-hbkid.
APPEND : chckfinal.
ENDIF.
CLEAR : chckfinal, chckpayer_u, chckinit.
ENDLOOP.
Populating the final CST TABLE
LOOP AT v_po_det.
MOVE : v_po_det-lifnr TO cst_rep-lifnr,
v_po_det-werks TO cst_rep-werks,
v_po_det-ebeln TO cst_rep-ebeln,
v_po_det-ebelp TO cst_rep-ebelp,
v_po_det-bedat TO cst_rep-bedat,
v_po_det-matnr TO cst_rep-matnr,
v_po_det-kbetr TO cst_rep-kbetr.
READ TABLE gr_wh_info WITH KEY ebeln = v_po_det-ebeln ebelp = v_po_det-ebelp."matnr = v_po_det-matnr.
IF sy-subrc EQ 0.
MOVE : gr_wh_info-mblnr TO cst_rep-mblnr,
gr_wh_info-bldat TO cst_rep-bldat,
gr_wh_info-menge TO cst_rep-menge,
gr_wh_info-dmbtr TO cst_rep-dmbtr,
gr_wh_info-bwart TO cst_rep-bwart,
gr_wh_info-whssn TO cst_rep-whssn,
gr_wh_info-whsdt TO cst_rep-whsdt.
ENDIF.
READ TABLE vend_inv WITH KEY ebeln = v_po_det-ebeln ebelp = v_po_det-ebelp."matnr = v_po_det-matnr.
IF sy-subrc EQ 0.
MOVE : vend_inv-buzid TO cst_rep-buzid,
vend_inv-bschl TO cst_rep-bschl,
vend_inv-wrbtr TO cst_rep-wrbtr,
vend_inv-belnr TO cst_rep-belnr,
vend_inv-gjahr TO cst_rep-gjahr,
vend_inv-xblnr TO cst_rep-xblnr.
ENDIF.
READ TABLE chckfinal WITH KEY ebeln = v_po_det-ebeln ebelp = v_po_det-ebelp."matnr = v_po_det-matnr.
IF sy-subrc EQ 0.
MOVE : chckfinal-augbl TO cst_rep-augbl,
chckfinal-vblnr TO cst_rep-vblnr,
chckfinal-zbukr TO cst_rep-zbukr,
chckfinal-chect TO cst_rep-chect,
chckfinal-zaldt TO cst_rep-zaldt,
chckfinal-hbkid TO cst_rep-hbkid.
ENDIF.
READ TABLE mat_desc WITH KEY matnr = v_po_det-matnr.
IF sy-subrc EQ 0.
MOVE : mat_desc-maktx TO cst_rep-maktx.
ENDIF.
READ TABLE vend_det WITH KEY lifnr = v_po_det-lifnr.
IF sy-subrc EQ 0.
MOVE : vend_det-name1 TO cst_rep-name1,
vend_det-j_1icstno TO cst_rep-j_1icstno.
ENDIF.
APPEND : cst_rep.
CLEAR : cst_rep, v_po_det, gr_wh_info, vend_inv, chckfinal.
ENDLOOP.
Populating GT_output
LOOP AT cst_rep.
cst_gr = cst_rep-dmbtr * ( cst_rep-kbetr / 1000 ).
cst_inv = cst_rep-wrbtr * ( cst_rep-kbetr / 1000 ).
MOVE : cst_gr TO cst_rep-cst_dmbtr,
cst_inv TO cst_rep-cst_wrbtr.
MODIFY : cst_rep.
CLEAR : cst_rep, cst_gr, cst_inv.
ENDLOOP.
LOOP AT cst_rep.
MOVE : sy-tabix TO gt_output-slno,
cst_rep-lifnr TO gt_output-lifnr,
cst_rep-name1 TO gt_output-name1,
cst_rep-j_1icstno TO gt_output-j_1icstno,
cst_rep-werks TO gt_output-werks,
cst_rep-matnr TO gt_output-matnr,
cst_rep-maktx TO gt_output-maktx,
cst_rep-ebeln TO gt_output-ebeln,
cst_rep-ebelp TO gt_output-ebelp,
cst_rep-bedat TO gt_output-bedat,
cst_rep-mblnr TO gt_output-mblnr,
cst_rep-bldat TO gt_output-bldat,
cst_rep-menge TO gt_output-menge,
cst_rep-dmbtr TO gt_output-dmbtr,
cst_rep-cst_dmbtr TO gt_output-cst_dmbtr,
cst_rep-bwart TO gt_output-bwart,
cst_rep-whssn TO gt_output-whssn,
cst_rep-whsdt TO gt_output-whsdt,
cst_rep-buzid TO gt_output-buzid,
cst_rep-bschl TO gt_output-bschl,
cst_rep-wrbtr TO gt_output-wrbtr,
cst_rep-cst_wrbtr TO gt_output-cst_wrbtr,
cst_rep-belnr TO gt_output-belnr,
cst_rep-gjahr TO gt_output-gjahr,
cst_rep-xblnr TO gt_output-xblnr,
cst_rep-augbl TO gt_output-augbl,
cst_rep-vblnr TO gt_output-vblnr,
cst_rep-zbukr TO gt_output-zbukr,
cst_rep-chect TO gt_output-chect,
cst_rep-zaldt TO gt_output-zaldt,
cst_rep-hbkid TO gt_output-hbkid.
APPEND gt_output.
CLEAR : cst_rep, gt_output, sy-tabix.
ENDLOOP.
END-OF-SELECTION.
*-ALV Routine
PERFORM alv_forms.
*& Form alv_forms
FORM alv_forms.
PERFORM alv_routines.
gx_variant = sy-repid.
CALL FUNCTION 'REUSE_ALV_VARIANT_DEFAULT_GET'
EXPORTING
i_save = g_save
CHANGING
cs_variant = gx_variant
EXCEPTIONS
not_found = 2.
IF sy-subrc = 0.
vari = gx_variant-variant.
ENDIF.
PERFORM comment_build USING gt_list_top_of_page[].
PERFORM fieldcat_init USING gt_fieldcat[].
PERFORM layout_build USING gs_layout.
PERFORM print_build USING gs_print.
PERFORM alv_output.
ENDFORM. " alv_forms
*& Form alv_routines
FORM alv_routines.
PERFORM eventtab_build USING gt_events[].
PERFORM e06_t_sort_build USING gt_sort[].
PERFORM sp_group_build USING gt_sp_group[].
g_save = 'A'.
PERFORM variant_init.
ENDFORM. " alv_routines
*& Form eventtab_build
----Hi Anu,
These two statements taking to much time for execution what I can do for reducing execution time.
Regards,
Rakesh
SELECT ebeln
ebelp
matnr
lifnr
werks
buzid
bschl
wrbtr
bukrs
belnr
gjahr
FROM bseg INTO TABLE bseg_itab
FOR ALL ENTRIES IN v_po_det
WHERE ebeln EQ v_po_det-ebeln AND matnr EQ v_po_det-matnr AND buzid EQ 'W' AND bschl EQ '96'.
ENDIF.
SELECT ebeln
ebelp
matnr
lifnr
werks
buzid
bschl
bukrs
belnr
gjahr
koart
augbl
FROM bseg INTO TABLE chckinit
FOR ALL ENTRIES IN v_po_det
WHERE ebeln EQ v_po_det-ebeln AND matnr EQ v_po_det-matnr AND buzid EQ 'W' AND bschl EQ '86' AND koart EQ 'K'.
ENDIF. -
How can I get a new overhead line replaced?
Hey guys, I suscribed to BT infinity two months ago and I've noticed that everytime it rains my internet is knocked offline. Yesterday my area was battered with rain and wind all day and my internet disconnected 6 times an hour as the light kept going orange showing the annoying router walkthrough page. I've located the source where the wire is exposed and its at the top of the house:
Now I flagged this up to BT two days ago via the online chat page that was sent through twitter but I've not recieived a reply after 48 hours. DLM also has kicked in reducing my speed from 78mbps to 74mbps. I know that from reading these forums, once the speed goes down it stays down forever. I'm now considering turning off the HH5 to stop the speed plummeting even more until this is fixed. Now the question is if I were to replace the whole line, is it possible for BT to restore the speed back to 78mbps? And how do I go about changing the line? Also I believe as it is outside the demarcation point, it's upto BT to fix it and I should not be charged for it?
Cheers guys
Solved!
Go to Solution.Thought I'd give you guys an update, I tweeted BT a few days ago and filled in the online form. They finally rang me back today and it was a fella from Ireland! He saw on the system that I had many intermittent line faults and broadband kept knocking out so I'm having an engineer in first thing Monday morning!
So a word of advice guys, best thing to do is use Twitter and fill in the form and wait for them to get back to you. I don't want to sound racist in any way but it's good to speak to someone who can speak and listen to in English fluently albeit in an Irish accent
I'll let you guys know of any developments and whether my dlm will be resetted once the issue is fixed. It's so sad seeing my speeds drop from 76mb to 54mb over two days of heavy rain
Oh and Btw one question for the pros, my master socket is backwired and I only found this out after my BT infinity installation. To be honest it's not backwired, just that it's crimped through to the extension which was converted into a master rendering my original master defunct. Could I tell the openreach guy to fix that as well or would I be charged for it as it's not a priority to be fixed? -
Adobe forms: How to reduce the spacing dynamically between two variables
Hi All,
I have a requirement where at the header I am printing the address and below that other contact detials of vendor. I have used standard address element of adobe forms and printing it on the form using a variable.
When my addres contains 3 lines only in that case other contact details which are below address varible should dynamically move up.
BRADKEN RESOURCES P/L
86 BYNG STREET
ORANGE NSW 2800
Tel 123456789
How can reduce the above spacing bet two variable. Please help me in getting the solution for this issue.
Many thanks in advance!
VikashHi
You can concatenate the 2 variable and display it on that field.
data.Page1.<field>.rawValue = Concat(data.Page1.<field1>.rawValue , "\u000a" , data.Page1.<field2>.rawValue)
Kind Regards
Mukesh -
X axis labels. How to reduce information.
Im having trouble finding how to reduce the number of x axis labels, (time), My graph is of temperature every 4 minutes over about 10 hours. I would like to have the x axis in hours, but Numbers seems to insist on labeling all 250 points. Is there a way to get Numbers to place x axis data labels only at every 25 data points? The Numbers Users Guide does not seem to address the problem.
If the intervals between x-values are the same, then a line graph will plot the data in the same fashion with correct distance between values. If the x-values have inconsistent intervals, then a line plot will not display the data properly.
But it appears that I did not look at the graphs close enough as X-Y Plots can set various intervals between x-axis values while Line Plots cannot change the x-axis intervals (but can change the y-axis interval.)
Here's a screen shot:
Regards, -
How can get a Graphics to draw line on screen?
How can get a Graphics to draw line on screen?
Now, I can get a Graphics to draw line based on component. For example JPanel, but I want to get a Graphics to draw line on screen.By drawing on the screen, I assume you mean drawing outside the bounds of a top-level window like
JFrame or JDialog. You can't do that. At least, without going native and even then that's a dodgey thing
for any platform to let you do. One thing you can do is simulate it with a robot's screen capture:
import java.awt.*;
import java.awt.event.*;
import java.awt.image.*;
import javax.swing.*;
public class X {
public static void main(String[] args) throws Exception {
Rectangle bounds = GraphicsEnvironment.getLocalGraphicsEnvironment().getMaximumWindowBounds();
BufferedImage image = new Robot().createScreenCapture(bounds);
Graphics2D g2 = image.createGraphics();
g2.setStroke(new BasicStroke(20));
g2.setPaint(Color.RED);
g2.drawLine(0, 0, bounds.width, bounds.height);
g2.drawLine(bounds.width, 0, 0, bounds.height);
g2.dispose();
JLabel label = new JLabel(new ImageIcon(image));
label.addMouseListener(new MouseAdapter(){
public void mousePressed(MouseEvent evt) {
System.exit(0);
JFrame f = new JFrame();
f.setUndecorated(true);
f.getContentPane().add(label);
f.setBounds(bounds);
f.setVisible(true);
} -
How to Reduce size of Data Markers
Hi,
I created a "Line Chart" and it has just 2 measures , so there are two lines. There are 33 charts and each page has one chart. I enabled data markers. The markers are too big as the height of chart is more and how to reduce the size of the markers. I reduced height of chart then markers size becomes less. But We want the chart to occupy entire page but marker size should be little smaller. Is this possible.
BR, Nanda Kishorehi Nanda Kishore,
As per my knowledge, it is not possible in WEBI as there is no control/setting on the size of data markers of Chart unlike Crystal.
Regards,
Vamsee
Maybe you are looking for
-
MS-6167 Memory Upgrade half being detected
Hi, I built an Athlon K7 900mhz pc some years ago with Win XP, 128 MB RAM, 13G hard drive, award bios ver 1.6 (latest one) and now want to upgrade ram. I know this board goes up to 768mb ram but I can't find any info on MSI's website regarding this
-
How to do profiling for Java 1.6... (JVMTI-based profiler)
As Java1.6 uses JVMTI instead of JVMPI, I am not able to find an open source tool which can profile my application. Can some body help me to find a tool or pugin for eclipse(TPTP is trying to fix it in coming 4.5 release) or Netbeans. Ananth Chellath
-
FW CS6 Align tool not working properly with lines of text
Much to my surprise the align tool is not aligning properly with text and I'm not sure what the issue is. My snap to grid distance is set at 1 in preferences. Task: Left-align several vertically-stacked lines of type using the alignment tool. All lin
-
How can i tell which card i have instal
i dont know if i have an audigy gamer, MP3, or audigy . is there something i can use to hepl me out thanksMessage Edited by madtical777 on 06-06-2005 02:23 AM
-
Inputs to propose SharePoint for scanned Document Management System
Hi All, My client has a project requirement and i am thinking of proposing sharepoint for their requirement.I need some selling points for proposing sharepoint. Here is the requirements.Any help is much appreciated. Client has huge documents stored i