How to save a waveform from TDS3000 series oscilloscope to PC via GPIB?

Hi, I'm a summer intern and I've been recently assigned the task to transfer a telecom pulse mask waveform from a TDS3054 to the PC via GPIB. My question is, is there anyway that I can save the waveform on the scope and transfer the file onto my PC? Or even better yet, save the waveform directly onto my PC in a spreadsheet format?

First, download the instrument driver for the TDS3054 scope from National Instruments' Instrument Driver Network. Depending on what software you have installed on your system, you may need to download additional software (look at the "Required Software" section). If you have Measurement Studio 6.0 and the NI-GPIB driver, you should have everything you need.
Once you've installed the instrument driver, look at the instructions that came with the instrument driver for how to save and read from your oscilloscope, and look at the instructions here for how to use that instrument driver with Visual Basic 6.0.
TonyH
Measureme
nt Studio

Similar Messages

How to save a datas from serial port?

How to save a datas from serial port?

Hi
I need some help about rs-232 communication. I want to make a vi witch can do this things:
-read a txt file (to simulate a serial port like when the datas are coming)
i will get 3 different data in serial port (like this: 121 213 135)
i want to save in a txt file what datas get my vi
so
-write in a txt file or draw in a diagram (or both)
so my problem is: read in serial port and save in a file and draw a diagram.
if anybody can help pls HELP ME because im a beginner in this problem.
I already do something but Im not sure that good.
Thx for all.

How to save the string from JTextFied to database?

can i know how to save the data from JTextFied to databse. Is it using update?

The most straightforward way would be something like:
String myKey=myKeyField.getText();
String foo=fooField.getText();
String sql="update mytable set foo='"+foo+"' where mykey='"+myKey+"'";
connection.createStatement().executeUpdate(sql);
This example assumes that the input fields cannot possibly contain quotes or the string won't be built correctly. Which by the way brings up a question I'd be interested in hearing others answer: What do you do about this? Sometimes I use PreparedStatement which handles that problem, other times I write my own little function to escape the string properly.
You can also read the record into a ResultSet and use ResultSet.update(). I'm mostly using mySql and I found that in mySql ResultSet.update just creates a SQL update statement like I did above and executes it, so the only real advantage would be if you find the syntax more convenient. Perhaps other database drivers do something different that would give other pros and cons.

How to save a pic from an email

I love my droid x but I can't find an answer on how to save a pic from an email. Does anyone know how to do this or what app will help me ?

Im sorry, I left out a step, after you download file, then hold on file on list (Do not Open) and then select save from the menu.
Ok let try this again
1. Open Email
2. At top there should be the number and the words "View Attachments" - Click on View Attachments
3. Now you should have a list of attachments with a arrow next to it if not downloaded.
4. Click file you want to download and you should get a animation where the arrow was that is indicating its being downloaded.
5. Once the animation stops this means file has been downloaded to a temp file to be viewed.
6. Now Press and Hold on file text and a window should open with three options - VIEW - SAVE- and SHARE
7. Select Save from list
8. Once complete it will have a little message at bottom of page that says "File was downloaded to SD Card"
9. Now file will be saved in SD / Messages folder on SD Card.

How do I transfer photos from my HP PC to my ipod via photo sharing?

how do I transfer photos from my HP PC to my ipod via photo sharing?

Hi Sirisaacnewtontrinity,
If you are having issues syncing your photos, you may find the following article helpful:
iTunes: Syncing photos
http://support.apple.com/kb/ht4236
Regards,
- Brenden

How to save the data from AI Read.vi?

Hi,
The main target is that testing the strength of a object which is extended by a force. The desired results are
1. The strength of object under the force(main target, I am trying now);
2. Displacement of object being extended(I have mimicly done);
3. Images of deformation of the object extended(I have mimicly done).
4. The sub procedure will stop when the object under testing is broken. I intend to use the big pulse from force sensor by analizing the data acquired.( it is more difficult if using machine vision).
What I am mainly trying to do now is implementation of a sub vi to collect the data which is acquired from channel 0 of PCI-6052E which is connected to a force sensor. I have tried to use an existing exam
ple as attached with some modifications. I have tested the data from the sensor by comparing to measurement by multimeter and it takes sense. But
1. I still don't know how to save data displayed by AI Read.vi? And use what kind data type could save more memory?
2. I think that memory management is very important because each points of the result includes its strength, image and displacement. How can I acquire enough significant points for the final results being reliable and save these data down to an array or cluster synchronously? (each sub procedure has no time limited)
3.Because I think that a continuous data acquisition would occupy ALL CPU TIME and their related images and displacements would have no chance to be taken down by CPU at the same moment. Am I right?--I am sure that it is not very difficult problem but my mind is still in caose and the time is quite limited to me now.
I am looking for your sugguestion or solution or control philosophy too. You can modify the fi
le attached if you can. I will learn from your idea.
Thank you very much for your time and energy!
Your
Swedlin
Attachments:
Acquire_N_Scans_1_10.vi ‏75 KB

Hello;
Regarding your question on the data type that would use less storage space, the answer is binary type. Actually, you can use another shipping example as start point of your application. The example I'm mentioning is a data logger, that saves binary data to a file on your hard drive. You can find that example at Search Examples->I/O Interfaces->Data Acquisition->Data Logger->High Speed Data Logger.
Regarding your question about the CPU time, the statement is valid. In case you use a synchronous AI task, the CPU execution will get stuck inside the AI Read.vi untill the buffer is ready to be read. One thing you can do about that is to change the acquisition task to be asynchronous. There is a good example in Labview showing how you can accomplish that.
You can find the example at Search Examples->I/O Interfaces->Data Acquisition->Analog Input->DAQ Occurrences.
You can combine both examples to accomplish the task you need.
Hope this helps.
Filipe A.
Applications Engineer
National Instruments

How to save an image from canvas to jpeg2000 format?

good day! i would like some help about jj2000. i wish to save an image from canvas to a jpeg2000 format file. how will i do it using the jj2000? i just need to save it to a file.
please help!!!
thank you in advance!
lrds

I am not familiar with Jpeg2000, but the easiest way I've found to go from Java to a JPeg file is with Java Adavanced Imaging (JAI) package from Sun. Take a look at it and see if it meets your requirements.

How to 'save target as' from java?

pardon for the english and pardon if the post is not in the right place.
the idea to open a webpage (url given) that contains links to several pdf files, and to save those files in the hard disk. how can this be done with java? can anybody help?

Well first you've got to have a webbrowser or some other widget that's displaying PDF files. Normally webbrowsers invoke acrobat to do this so the point is rather moot there, but suppose you have several pdfs open using lowagie or something. The answer is that your PDFs have to come from somewhere, thus there is a data source, so you just need to save the data from the data source to the disk

How to save data acquired from NI-DAQ in text format instead of TDMS using the DAQ-mx ANSI C code?

Hi,
I wanted to save data acquired from NI-DAQ (for example, NI 9234) in a file using the DAQ-mx ANSI C Code. The response I got was as follows:-
One way to do it is with TDMS logging. DAQmx comes with functions designed to log to a TDMS file. This is a special file type that is used for collecting data in a logical format. It can be displayed in a TDMS viewer where data is separated into groups and channels. NI-DAQmx provides examples for how to log to TDMS. Look at the TDMS examples in the C:\Users\Public\Documents\National Instruments\NI-DAQ\Examples\DAQmx ANSI C\Analog In\Measure Voltage directory.
However, now I want to know is there a way that using that same C code, can we save the data in a .txt file format (Text File) instead of a TDMS file? We actually want to access that file through MATLAB (that's why we want to save it in text format).
Also on an other note, is there a way we can access & open TDMS files by MATLAB?
Thanks,
Sauvik Das Gupta

There's a way you can access TDMS files in MATLAB:
http://zone.ni.com/devzone/cda/tut/p/id/7446

How to save downloaded files from safari for offline use?

Need help how to save downloaded PDF or images from Safari for offline use. On Mac or PC, we "save as" the files. How do you do it on safari on iPhone?

You can't detach email attachments as separate files, though you can view supported formats as attachments. If you're viewing webmail with Safari, the attachments aren't saved on the iPhone.
Apple hasn't made any announcements about new feature for the iPhone and rarely does. The other iPhone users in this user-to-user forum have no access to unannounced Apple plans, and speculation about them is prohibited by the forum Terms of Use.
If you want to make a suggestion to Apple, post it on the iPhone Feedback page:
http://www.apple.com/feedback/iphone.html
Message was edited by: modular747

How to save multiple images from jpeg to psd?

I'm pretty new at this and have tons of vacation photos. Things I've read have left me terrified of leaving my images in jpeg, but I don't know how to save them all to .psd (and is that really the format I want to use?). I tried, and suddenly I'm out of space on my harddrive, so I think I've made copies of copies and have way more saved than I need. Any advice is appreciated - thanks.

<[email protected]> wrote > ...Things I've read have left me terrified of leaving my images in jpeg... Andrea, If the JPEG files are straight out of your camera, there is no harm in "leaving" them as-is... they don't degrade from just sitting there. The possible degradation of JPEG files comes from saving as a JPEG - typically after you have done an edit to the image. One good way to approach the issue: when you open an image for editing, before you do anything, click the menu File > Save As... and then choose the PSD file type. This will make a copy for you to work with, which will NOT degrade as you save, re-edit, re-save, etc. After you're finished working it over, if you need a JPEG copy, use the File > Save As... and select JPEG to make an edited copy in the smaller file format. (File > Save For Web is also useful for this - it allows you to set your quality and size parameters on-the-fly as you save) HTH, Byron

How to save image catch from USB camera to database ?

Hi guys.
I needed help on IMAQdx tools. But i dont know how to save image that catch from USB camera to database.

So you can acquire the image OK?
And you want to save it to a SQL database?
See here:
http://zone.ni.com/devzone/cda/epd/p/id/5210

How to save work seperate from background

Hi,
I want to know how to save the image that I created separately from the background so I can use the image as an icon or something else. I am new in web design, when I tried so hard to make something in photoshop I ended up the bloody back ground is 10 times bigger than my work (image) and it distorts the web layout.
Bottom line, I need to know how to save something as an icon or maybe object without the dam white background.
Craig

<a href="http://www.pixentral.com/show.php?picture=11dSoqXtoYz8noH9N3wcEqawLKHfs1" /></a>
<img alt="Picture hosted by Pixentral" src="http://www.pixentral.com/hosted/11dSoqXtoYz8noH9N3wcEqawLKHfs1_thumb.png" border="0" />
 
 couldnt post psd file. The site doesnt seem working properly.
 
 Now you can simulate my steps by create a new layer/background by clicking new and chose default photoshop size then pick up custom shape tool, chose a shape to draw with, envelop is the case. Keep along with your instruction.
 
 Tell me do you have any problem saving it as the way we want ?

How to save the text from text area back to a text file?

Hi all,
Now I am doing a small panel which containts a JTextArea, this TextArea will read the content from a text file, then display the content of the text file on the TextArea itself.
My idea is, allow the user to modify the content in the textarea (I set it Editable=true;), then save it. After the user press the save button, the content in the text file will be updated accordng to the user;s modification on TextArea.
I had done the displaying part by using JavaI/O (BufferReader), now any expert here know how to update the TextArea content back to the text file itself? PLease teach me, THANKS !!!

NOw I had manage to clear out the error, but now the problem is when I click on the 'save' button, this function clear out the entire text file for me !!!
The code are as below:
       if(e.getSource()== vButtons[0])
          try{
           String str;
           String Ky = tArea.getText();
           BufferedWriter buffWrite=null;
           BufferedWriter in1 = new BufferedWriter(new FileWriter("Keyword.txt"));
                    buffWrite.write(Ky);
                buffWrite.flush();
                    buffWrite.close();
                in1.close();
          catch (IOException ex) {
          ex.printStackTrace();
        if(e.getSource()== vButtons[1])
              new panel();
              dispose();
         if(e.getSource()== vButtons[2])
            System.exit(0);
    }     Please tell me how to save the TextArea to the text file, THANKS !!!

How to save new contact from phone app to ms outlook work account instead of local contact

Hi,
I need some help please.
I usually save new numbers that call me from the phone app, I just hit "add to contacts".
I keep all of my contacts on my work microsoft outlook account so they are synced with my work, I have absolutely no local contacts on the phone.
My Z10 saves these contacts directly as local contacts instead of saving them on my work account.
However, if I go to the phonebook app, and select add new contact from there, I have the option to select whether it's a personal or a work contact. If I select work contact, it will save it to my work outlook and everything's fine, however when saving from the phone app I don't have this option.
I don't understand what I'm doing, wrong, please help on how to save to work account directly from phone app.
Thank you
Solved!
Go to Solution.

Hey bllizzard,
Welcome to the BlackBerry Support Community Forums.
Thanks for the question.
What version of BlackBerry 10 software are you currently using? Go to Settings>About to find this information.
When in the phone application and press and hold a number, choose add to contacts. Then click Add contact at the bottom, at the very top you'll have a choice to choose Personal or Work. Choose Work if you want the contact saved to your work email account.
Let me know if you have any more questions.
Cheers.
-ViciousFerret
Come follow your BlackBerry Technical Team on Twitter! @BlackBerryHelp
Be sure to click Like! for those who have helped you.
Click Accept as Solution for posts that have solved your issue(s)!

How to save a waveform from TDS3000 series oscillosco​pe to PC via GPIB?

Similar Messages

Maybe you are looking for

How to save a waveform from TDS3000 series oscilloscope to PC via GPIB?