How to use DECODE function in Exspression?

Hi,
Can we use DECODE in Expression?
I'm trying to use DECODE function but there is an error during the validation. But when i validate the mapping, it is successfully compiled but it is failed during deployment.
But if I use CASE instead of DECODE, it works fine.
Can we use DECODE in OWB???
Thanks
Raj

Hi,
In OWB 10gR2, if your are using only one DECODE in an expression, it's working. The package will compile when deploying the mapping. OWB will replace the DECODE by a CASE.
But when you are using nested decode in an expression ( for example : decode(col1, 1, 'M', decode(col2, 'Madame', 'Mme', null)) ) only the first one is replaced by a case at deployment.
In ROW_BASED mode, text of the expression is used outside of an sql statement and deployment will fails with "PLS-00204: function or pseudo-column 'DECODE' may be used inside a SQL statement only."
If operating mode for the mapping is set to SET_BASED, it's working because the expression is used in an sql statement.
I have logged a SR in metalink for this issue and a bug is opened (bug 5414112).
But I agree with you, it's better to use case statement.
Bernard

Similar Messages

How to use decode function in oracle apex 3.2.1

Hello Friends,
how to use decode
var_decode := 'decode'||'('|| var1 ||','|| -800000000000000||','||'.A'||','||
appreciate your help.
regards/kumar
Edited by: kumar73 on Apr 23, 2010 12:25 PM
Edited by: kumar73 on Apr 23, 2010 12:27 PM

Hey just on this particular point, there's a handy PL/SQL method for escaping quotation characters which may reduce the complexity of the string.
For example, if I had a string:
I can't understand why quoting my 'quote' characters never seems to "work"!and I wanted to pass that into a variable, I could do this:
vc_foo:= 'I can''t understand why my ''quote'' characters never seems to "work"!';or I could use the q function, whereby you enclose your string within a quote delimiter of your choice, like so:
vc_foo:= q'^I can't understand why quoting my 'quote' characters never seems to "work"!^';
note: I used the caret (^) character by convention but any valid character will do
...all of which leaves your original string more or less unadulterated.
I find this particularly useful for generating dynamic SQL and dynamic PL/SQL, as it leave the query looking a tad more readable, although if you are chaining together multiple strings with double-pipes, it can make it a little muddier. I find it particularly useful if I'm going to deal with string data from, for example, a field with Irish-derived surnames such as "O'Reilly"...
Give it a go!

How to use decode function

Hello Friends,
I have a query that has different columns and I am not sure what the data type of each column is ...
I want to use decode function which displays the following if the value of the column is like this ..
if the value of column is -714E ie -700000000000000 then display as .A
if the value of column is -814E ie -800000000000000 then display as .B
NOTE ; don't know which column is having the value - and i don't know the data type of the column is ..
got to use the decode function for all the columns selected ..
I want to use decode function pls let me know how to write for this kind of requirement.
appreciate your help in this rgds.
thanks/kumar

Dear Sir / Madam,
Thanks for your understanding.
Right now I am facing a unique problem.
I am using decode function in a select statement. The columns are dynamic some columns are of type number and some are varchar datatypes. I want to apply decode function for every column irrespective of datatype.
What i am finding difficult is if the column is a number datatype , the decode funciton is working good but if the column datatype is varchar or char datatype then i am getting ..
here's the decode function..
decode (CHAI.EVNDRIVE,
-800000000000000,'.A',
-700000000000000, '.B',
-600000000000000 ,'.C',
-500000000000000 , '.D',
-400000000000000 , '.E',
-300000000000000 , '.F',
-200000000000000, '.G',
-100000000000000 , '.H',
-1000000000, '.R' ,CHAI.EVNDRIVE ) EVNDRIVE
report error:
ORA-01722: invalid number
pls let me know how to over come this kind of scenario.
is their a way to find whether the column datatype is number or char , so that i can check the column datatype before the decode funciton is applied ..
thanks ..
kumar

How to use Decode Function in Webi / Designer - BOE XI 3.1

Hi All,
I have a SQL query which needs to include in the webi report.
Below is the query :
SELECT
SECURITY.SEC_CUSIP_NO "CUSIP",
SECURITY.STY_SEC_TY_CD "SECURITY TYPE",
SECURITY.SEC_DERIVED_DESC_TX "SECURITY DESCRIPTION",
SECURITY.sec_dep_teleg_de "FED DESCRIPTION",
SEC_STND_PR "STANDARD/FACTORED PRICE",
SEC_STND_PR_EFF_DT "STANDARD/FACTORED PRICE Date",
SECURITY.SEC_YIELD_PR "YIELD PRICE",
SECURITY.SEC_YIELD_PR_DT "YIELD RICE EFFECTIVE DATE",
STND_PR_VND_VENDOR_CD "PRICE SOURCE",
SEC_MATURITY_DT "MATURITY DATE",
SEC_ISSUE_DT "ISSUE DATE",
             CASE WHEN SECURITY.STY_SEC_TY_CD IN ('BA','CD','CDD','CDE','CDM','CDV','CP','CPD') THEN
                (position.PSN_AVAIL_PAR_VL + position.PSN_COLLAT_PAR_VL) * (SECURITY.SEC_STND_PR) / 100
             ELSE
                (position.PSN_AVAIL_PAR_VL + position.PSN_COLLAT_PAR_VL) * ( ( SECURITY.SEC_YIELD_PR * DECODE (SECURITY.SEC_PRIN_FT, 0, 1, SECURITY.SEC_PRIN_FT))) / 100
                * DECODE(SECURITY.STY_SEC_TY_CD, 'AMP', DECODE(NVL(SECURITY.SEC_MULTIPLIER_UNIT_VL,0), 0, 1, SECURITY.SEC_MULTIPLIER_UNIT_VL), 'MMP', DECODE(NVL(SECURITY.SEC_MULTIPLIER_UNIT_VL,0), 0, 1, SECURITY.SEC_MULTIPLIER_UNIT_VL), 'AMPT', DECODE(NVL(SECURITY.SEC_MULTIPLIER_UNIT_VL,0), 0, 1, SECURITY.SEC_MULTIPLIER_UNIT_VL), 1 )
             END
        ) "MARKET VALUE"
FROM SECURITY SECURITY
   ,   position position
WHERE STND_PR_VND_VENDOR_CD = 'VT'
AND SEC_MATURITY_DT > SYSDATE-1
and SECURITY.sec_sys_id=position.sec_sys_id
I could create a report which has selected objects and defined where condition from the above query. I have also created a variable for 'when' & 'then' condition but stuck at else part which contains 'DECODE' function.
Please suggestions how to write the same at the report or designer level.
Thanks,
Rameez Shaikh

Hi Rameez,
Looking at the query you can create the object directly in the universe, either create two objects one for inner decode and use it in outer case logic. In report it is nothing but nested if logic. For eg. If(a=b;1;(if(a=c;2;3))
Thanks
Gaurav

How to use decode concept in htp.p?

Hi All,
How to use decode function in htp.p syntax?
Thanks,
Anoo..

Hi,
Could you please give more details on what you like to achieve? Decode function works only in sql query.
You can first do sql query, and then do htp.p.
Or you can use PL/SQL IF or CASE statements.
You can also create custom decode function if you need.
Regards,
Oleg

How can we use DECODE function in where clause.

Hi Guys,
I have to use DECODE function in where clause.
like below
select * from tab1,tab2
where a.tab1 = b.tab2
and decode(code, 'a','approved')
in this manner its not accepting?
Can any one help me on this or any other aproach?
Thanks
-LKR

>
I am looking for to decode the actual db value something in different for my report.
like if A then Accepted
elseif R then Rejected
elseif D then Denied
these conditions I have to check in where clause.
>
what are you trying to do?
may be you are looking for
select * from tab1,tab2
where a.tab1 = b.tab2
and
   (decode(:code, 'A','Accepted') = <table_column>
    or
    decode(:code, 'R','Rejected') = <table_column>
   or
    decode(:code, 'D','Denied') = <table_column>
   )

How to use data function using characterstics variable for calculation on

how to use data function using characterstics variable for calculation on attribute as key figure

Hi Gayatri
Did you not see my answer for CASE because CASE does indeed offer the use of the BETWEEN clause, but DECODE does not. Let me give you a little synopsis of DECODE.
In its most simple form it takes 4 values and looks like this: DECODE(A, B, C, D)
This essentially means, IF A = B THEN C ELSE D
The trick to solving BETWEEN in a DECODE is to work out algoriths where A = B. Because we don't know how many values are between 00 and 99, although I could guess there were 100 we could of course have 100 parts in the DECODE but that would be awful. How about if we look at it another way and say this:
IF PART_NUMBER < 'SDK00' THEN pay_amount
ELSE IF PART_NUMBER > 'SDK99' THEN pay_AMOUNT
ELSE pay_amount + 100
This statement only had 2 hard coded values, but how to make DECODE work with less than? Easy, we use the LEAST function. The LEAST function takes 2 values and returns the one with the lowest value. So I use LEAST(PART_NUMBER, 'SDK00') then whenever the PART_NUMBER is lower than SDK00 it will be true. A similar situation exists for the opposite function GREATEST. Putting all of this together then, you can do this:
DECODE(PART_NUMBER, GREATEST(PART_NUMBER, 'SDK00'), DECODE(PART_NUMBER, LEAST(PART_NUMBER, 'SDK99'), PAY_AMOUNT * 100, PAY_AMOUNT), PAY_AMOUNT)
In English this can be read as follows:
IF the PART_NUMBER is greater than or equal to SDK00 and the PART_NUMBER is less than or equal to SDK99 THEN PAY_AMOUNT x 100 ELSE 0
Best wishes
Michael

How to use complex function as condition in Oracle Rule Decision Table?

How to use complex function as condition in Oracle Rule Decision Table?
We want to compare an incoming date range with the date defined in the rules. This date comparison is based on the input date in the fact & the date as defined for each rule. Can this be done in a decision table?

I see a couple of problems here.
First, what you posted below is not a syntactically valid query. It seems to be part of a larger query, specifically, this looks to be only the GROUP BY clause of a query.
Prabu ammaiappan wrote:
Hi,
I Have a group function in the Query. Below is the Query i have used it,
GROUP BY S.FREIGHTCLASS,
R.CONTAINERKEY,
S.SKU,
S.DESCR ||S.DESCRIPTION2,
S.PVTYPE,
RD.LOTTABLE06,
R.WAREHOUSEREFERENCE,
RD.TOLOC,
R.ADDWHO,
R.TYPE,
S.CWFLAG,
S.STDNETWGT,
S.ORDERUOM,
R.ADDDATE,
C.DESCRIPTION,
(CASE WHEN P.POKEY LIKE '%PUR%' THEN 'NULL' ELSE to_char(P.PODATE,'dd/mm/yyyy') END),
NVL((CASE WHEN R.ADDWHO='BOOMI' THEN RDD.SUPPLIERNAME END),SS.COMPANY),
RDD.BRAND,
S.NAPA,
RD.RECEIPTKEY,
R.SUSR4,
P.POKEY,
RDD.SUSR1,
r.STATUS, DECODE(RDD.SUSR2,' ',0,'',0,RDD.SUSR2),
rd.SUSR3Second, the answer to your primary question, "How do I add a predicate with with a MAX() function to my where clause?" is that you don't. As you discovered, if you attempt to do so, you'll find it doesn't work. If you stop and think about how SQL is processed, it should make sense to you why the SQL is not valid.
If you want to apply a filter condition such as:
trunc(max(RD.DATERECEIVED)) BETWEEN TO_DATE('01/08/2011','DD/MM/YYYY') AND TO_DATE('01/08/2011','DD/MM/YYYY')you should do it in a HAVING clause, not a where clause:
select ....
from ....
where ....
group by ....
having max(some_date) between this_date and that_date;Hope that helps,
-Mark

How to Use Decode for manipulating time

How can i use Decode function to manipulate time...
Example
suppose ive employee and his time in...i want to display status field by using decode,which reflects if that employee came after 09:15:00 the status='L' else this will print 'P'
i tried this
SELECT pin_code,DECODE( to_char(ACCESS_TIME,'HH24:MI:SS'>'09:15:00','l','P'))STATUS
FROM ATTENDANCE_REG
this query hasn't work...
waiting for reply
Regards
Danish Hayder

SQL> select case when to_number(to_char(sysdate,'sssss')) > 33300 then 'L'
2 else 'P' end status
3 from dual;
S
L
1 row selected.

How to use nullif function

hi frs
how to use nullif function.
i have used like below
<?FTE_COUNT div nullif (FT_COUNT+PT_COUNT+PI_COUNT+TEMP_COUNT+I_COUNT),0)?>but not getting it.
help pls.

Hi,
try <?xdofx: FTE_COUNT div decode(FT_COUNT+PT_COUNT+PI_COUNT+TEMP_COUNT+I_COUNT,0,null,FT_COUNT+PT_COUNT+PI_COUNT+TEMP_COUNT+I_COUNT)?>
Regards
Rainer

How to use read_text function module

Hi how to use read_text function module to read purchase order header text .what are all tht things to pass in ID,Name and Object
thanks,
Mahe

Dear,
Use below code.
DATA:IT_LINE LIKE TLINE OCCURS 0 WITH HEADER LINE,
V_TDNAME LIKE THEAD-TDNAME.
V_TDNAME = PO_NUMBER.
CALL FUNCTION 'READ_TEXT'
EXPORTING
*   CLIENT                        = SY-MANDT
    ID                            = 'F01'
    LANGUAGE                      = 'EN'
    NAME                          = V_TDNAME
    OBJECT                        = 'EKKO'
TABLES
    LINES                         = IT_LINE.
Thanks and Regards,

How to use standard function keys as custom keys

how to use standard function keys as custom keys.
i have encountered that problem while developing a screen, there i'm supposed to use standard function key F2 ( which actually meant for choose) for clearing the screen fields where the cursor is present and f1 for saving data that entered in screen fields, etc...
kindly help me out.

Hi ,
Solution to use SAP reserve function keys F1 .. F4 (mostly this requirement comes up for RF screens) can be acheived by assigning your new Function code using the Menu path Utilities --> F key Consistency in the Menu Painter (SE41) . Once you assign your cutom function code to the standard Fn keys the only remaining step is to make sure that you set a curson on any of the field on sceen by using the Key Word "SET CURSOR" .
If you dont use the key word SET CURSOR in the PBO of the screen then you might not see any response for F4.
Thanks

Using decode function without negative values

Hi friends
I am using oracle 11g
I have at doubt regarding the following.
create table Device(Did char(20),Dname char(20),Datetime char(40),Val char(20));
insert into Device values('1','ABC','06/13/2012 18:00','400');
insert into Device values('1','abc','06/13/2012 18:05','600');
insert into Device values('1','abc','06/13/2012 18:55','600');
insert into Device values('1','abc','06/13/2012 19:00','-32768');
insert into Device values('1','abc','06/13/2012 19:05','800');
insert into Device values('1','abc','06/13/2012 19:10','600');
insert into Device values('1','abc','06/13/2012 19:15','900');
insert into Device values('1','abc','06/13/2012 19:55','1100');
insert into Device values('1','abc','06/13/2012 20:00','-32768');
insert into Device values('1','abc','06/13/2012 20:05','-32768');
Like this I am inserting data into table for every 5 minutes Here i need the result like
output:
Dname 18:00 19:00 20:00
abc 400 -32768 -32768
to retrieve this result i am using decode function
SELECT Dname,
MAX(DECODE ( rn , 1,val )) h1,
MAX(DECODE ( rn , 2, val )) h2,
FROM
(SELECT Dname,Datetime,row_number() OVER
(partition by Dname order by datetime asc) rn FROM Device
where substr(datetime,15,2)='00' group by Dname.
According to above data expected result is
Dname 18:00 19:00 20:00
abc 400 600(or)800 1100
This means I dont want to display negative values instead of that values i want to show previous or next value.
Edited by: 913672 on Jul 2, 2012 3:44 AM

Are you looking for something like this?
select * from
select dname,
       datetime,
       val,
       lag(val) over (partition by upper(dname) order by datetime) prev_val,
       lead(val) over (partition by upper(dname) order by datetime) next_val,
       case when nvl(val,0)<0 and lag(val) over (partition by upper(dname) order by datetime) >0 then
         lag(val) over (partition by upper(dname) order by datetime)
       else
         lead(val) over (partition by upper(dname) order by datetime)
       end gt0_val
from device
order by datetime
where substr(datetime,15,2)='00';Please take a look at the result_column gt0_val.
Edited by: hm on 02.07.2012 04:06

How to use SQL functions in the queries

hey guys i wanna know how to use SQL functions in the queries is it possible or not .

Hi,
Wat exactly that set values are?
those from sql query?
How to use count():
The COUNT() function returns the number of rows that matches a specified criteria.
SQL COUNT(column_name) Syntax
The COUNT(column_name) function returns the number of values (NULL values will not be counted) of the specified column:
SELECT COUNT(column_name) FROM table_name
SQL COUNT(*) Syntax
The COUNT(*) function returns the number of records in a table:
SELECT COUNT(*) FROM table_name
SQL COUNT(DISTINCT column_name) Syntax
The COUNT(DISTINCT column_name) function returns the number of distinct values of the specified column:
SELECT COUNT(DISTINCT column_name) FROM table_name
The IN function helps reduce the need to use multiple OR conditions.
The syntax for the IN function is:
SELECT columns
FROM tables
WHERE column1 in (value1, value2, .... value_n);

How to use this function in crm5.2 - /CEM/ENT_IMPORT_DATAFROMEXCEL

i am having a problem regarding how to use this function to import values from an excel sheet.
in call funtion what to specify at place of ct_ent_action = ?
CALL FUNCTION '/CEM/ENT_IMPORT_DATAFROMEXCEL'
CHANGING
    CT_ENT_ACTION       =
EXCEPTIONS
FILE_ERROR          = 1
IMPORT_ERROR        = 2
OTHERS              = 3
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
        WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.

Hi
The use of Standard Parner functions are as follows:
1. Ordering Address (OA): The PO will be sent this vendor and not the main vendor.
2. Goods Supplier (WL): In case of return deliveries, Goods will be returned to thsi vendor's address
3. Invoicing party (RS): The payment will be made to this vendor.
Hope this clarifies.
Thansk

How to use DECODE function in Exspression?

Similar Messages

Maybe you are looking for