How to use processing routine 2 for another smartform in nace

Hi Techies,
I have configured custom smartform ZS1 for standard program RLE_DELNOTE for delivery in nace.
Now I need to configure another smartforms ZS2 for same program.
How to proceed with this?
Due to client constrain, I cannot make changes in ZS1.
If it would be custom program, I can create new Form Routine, and proceed.
But for same form routine, can you suggest differentiation methodology to proceed with processing routine 2:
Program                   RLE_DELNOTE
Form Routine              ENTRY
Smartform Form        ZS2
Kindle guide.
Thanks in advance ,
Tanaya

Hi Tanaya,
You can create a new output type in NACE and get this done. get a copy of existing output and attach your new smart form there. maintain appropriate condition records so that your document will trigger 2 outputs.
Thanks,
tansap.

Similar Messages

How to use Start Routine for this requirement

Hello,
I am having data in 2 ods and should load that data into cube, but there isn't any common object in both the ods's. I need to analyze based on these ods objects. so I thought of pulling some objects into 1ods which are used for analysis and added some objects to ods and cube. Now I have to write a start routine in update rules to fetch the data from the info objects which are present in another ods. Can any one help me in this?
Rajesh.

Hi Surya,
Extract all info from table BKPF
select * into it_bkpf
from bkpf
where gjahr = p_fisyr.
Select record based on internal table it_BKPF
The reason why FOR ALL ENTRIES syntax is used because of its cluster table.
select * into it_bseg
from bseg
for all entries in it_bkpf
where bukrs = it_bkpf-bukrs
and belnr = it_bkpf-belnr.
Delete duplicate record based on Company Code and GL No.
delete adjacent duplicates from it_bseg
comparing bukrs belnr.

How to use different page scapes in smartforms

hi
How to use different page scapes in smartforms.
I want Potrait format in the 1st page and Lanscape format in 2nd page is it possible if so plz suggest me an idea

Hi,
It is possible in smart forms, but not in scripts.
we can have 3 tabbed options for pages in smart forms.
General...
Output options
Conditions.
In output options u can define whether a page can portrait or land scape in print attributes.
Reward if helpful.
Regards,
Sandhya

How to Use PM BAPI for equipment Master upload : BAPI_EQUIPMENT_SAVEREPLICA

Hi ,
How to use PM BAPI for equipment Master upload : BAPI_EQUIPMENT_SAVEREPLICA.
May i know what are the input parameters & fields mandatory
for each Table structures ct_data , ct_datax , it_descript , it_longtext.
Can any one explain me Step by Step Process.
B'cos i tried with below code. Equipment is not getting created.
wa_itab-equipment_ext = '000000000100000001'.
wa_itab-descript      = 'Test 2 -> Lube Oil Pump'.
wa_itab-text_language = 'EN'.
wa_itab-sdescript     = 'Short Description'.
APPEND wa_itab TO it_itab.
CLEAR wa_itab.
LOOP AT it_itab INTO wa_itab.
    ct_data-ta_guid       = '000000000000000001'.
    ct_data-equipment_ext = wa_itab-equipment_ext.
    ct_data-descript      = wa_itab-descript     .
    ct_data-valid_date    = sy-datum.
    ct_data-equicatgry    = 'M'.
    APPEND ct_data.
    CLEAR ct_data.
    ct_datax-ta_guid       = '000000000000000001'.
    ct_datax-equipment_ext = 'X'.
    ct_datax-equipment     = 'X'.
    APPEND ct_datax.
    CLEAR ct_datax.
    it_descript-ta_guid       = '000000000000000001'.
    it_descript-text_language = wa_itab-text_language.
    it_descript-descript      = wa_itab-sdescript    .
    APPEND it_descript.
    CLEAR it_descript.
    it_longtext-ta_guid        = '000000000000000001'.
    it_longtext-text_language = wa_itab-text_language.
    it_longtext-text_id        = 'LTXT'.
    it_longtext-text_line      = 'SSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSS'.
    APPEND it_longtext.
    CLEAR it_longtext.
    it_longtext-ta_guid        = '000000000000000001'.
    it_longtext-text_language = wa_itab-text_language.
    it_longtext-text_id        = 'INTV'.
    it_longtext-text_line      = 'aaaaaaaaaaaaaaa'.
    APPEND it_longtext.
    CLEAR it_longtext.
    it_longtext-ta_guid        = '000000000000000001'.
    it_longtext-text_language = wa_itab-text_language.
    it_longtext-text_id        = 'INTV'.
    it_longtext-text_line      = 'bbbbbbbbbbbb'.
    APPEND it_longtext.
    CLEAR it_longtext.
    it_longtext-ta_guid        = '000000000000000001'.
    it_longtext-text_language = wa_itab-text_language.
    it_longtext-text_id        = 'INTV'.
    it_longtext-text_line      = 'cccccccccccccccc'.
    APPEND it_longtext.
    CLEAR it_longtext.
    CALL FUNCTION 'BAPI_TRANSACTION_COMMIT'.
call BAPI-function in this system
    CALL FUNCTION 'BAPI_EQUIPMENT_SAVEREPLICA'
      TABLES
        ct_data     = ct_data
        ct_datax    = ct_datax
        it_descript = it_descript
        it_longtext = it_longtext
        return      = return
      EXCEPTIONS
        OTHERS      = 1.
    IF sy-subrc = 0.
      CALL FUNCTION 'BAPI_TRANSACTION_ROLLBACK'.
      WRITE : 'Successful'.
    ENDIF.
    IF NOT return IS INITIAL.
      LOOP AT return.
        IF return-type = 'A' OR return-type = 'E'.
          WRITE : 'Error'.
        ENDIF.
      ENDLOOP.
    ENDIF.
    REFRESH return.
ENDLOOP.
Regards
SUrendar

Hi ,
How to use PM BAPI for equipment Master upload : BAPI_EQUIPMENT_SAVEREPLICA.
May i know what are the input parameters & fields mandatory
for each Table structures ct_data , ct_datax , it_descript , it_longtext.
Can any one explain me Step by Step Process.
B'cos i tried with below code. Equipment is not getting created.
wa_itab-equipment_ext = '000000000100000001'.
wa_itab-descript      = 'Test 2 -> Lube Oil Pump'.
wa_itab-text_language = 'EN'.
wa_itab-sdescript     = 'Short Description'.
APPEND wa_itab TO it_itab.
CLEAR wa_itab.
LOOP AT it_itab INTO wa_itab.
    ct_data-ta_guid       = '000000000000000001'.
    ct_data-equipment_ext = wa_itab-equipment_ext.
    ct_data-descript      = wa_itab-descript     .
    ct_data-valid_date    = sy-datum.
    ct_data-equicatgry    = 'M'.
    APPEND ct_data.
    CLEAR ct_data.
    ct_datax-ta_guid       = '000000000000000001'.
    ct_datax-equipment_ext = 'X'.
    ct_datax-equipment     = 'X'.
    APPEND ct_datax.
    CLEAR ct_datax.
    it_descript-ta_guid       = '000000000000000001'.
    it_descript-text_language = wa_itab-text_language.
    it_descript-descript      = wa_itab-sdescript    .
    APPEND it_descript.
    CLEAR it_descript.
    it_longtext-ta_guid        = '000000000000000001'.
    it_longtext-text_language = wa_itab-text_language.
    it_longtext-text_id        = 'LTXT'.
    it_longtext-text_line      = 'SSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSS'.
    APPEND it_longtext.
    CLEAR it_longtext.
    it_longtext-ta_guid        = '000000000000000001'.
    it_longtext-text_language = wa_itab-text_language.
    it_longtext-text_id        = 'INTV'.
    it_longtext-text_line      = 'aaaaaaaaaaaaaaa'.
    APPEND it_longtext.
    CLEAR it_longtext.
    it_longtext-ta_guid        = '000000000000000001'.
    it_longtext-text_language = wa_itab-text_language.
    it_longtext-text_id        = 'INTV'.
    it_longtext-text_line      = 'bbbbbbbbbbbb'.
    APPEND it_longtext.
    CLEAR it_longtext.
    it_longtext-ta_guid        = '000000000000000001'.
    it_longtext-text_language = wa_itab-text_language.
    it_longtext-text_id        = 'INTV'.
    it_longtext-text_line      = 'cccccccccccccccc'.
    APPEND it_longtext.
    CLEAR it_longtext.
    CALL FUNCTION 'BAPI_TRANSACTION_COMMIT'.
call BAPI-function in this system
    CALL FUNCTION 'BAPI_EQUIPMENT_SAVEREPLICA'
      TABLES
        ct_data     = ct_data
        ct_datax    = ct_datax
        it_descript = it_descript
        it_longtext = it_longtext
        return      = return
      EXCEPTIONS
        OTHERS      = 1.
    IF sy-subrc = 0.
      CALL FUNCTION 'BAPI_TRANSACTION_ROLLBACK'.
      WRITE : 'Successful'.
    ENDIF.
    IF NOT return IS INITIAL.
      LOOP AT return.
        IF return-type = 'A' OR return-type = 'E'.
          WRITE : 'Error'.
        ENDIF.
      ENDLOOP.
    ENDIF.
    REFRESH return.
ENDLOOP.
Regards
SUrendar

How to write conversion routine for key figure?

Our customer has this requirment:
we need to know the last time of some TV program in BEx report, If a TV program last 500 seconds, we need show the key figure like this: 00:08:20, If a TV program last 100000 seconds, we need show the key figure like 27:46:40 (27 hours and 46 minitues and 27 seconds), If we define a key figure as time, BW system will report a error that say it is not acceptable time. If we want to define a integer, but we need display it like hhmmss format. We know we can write conversion routine for char. but I don't how to write conversion routine for key figure.   Please give me any hint if any other solutions?
Edited by: SY DONG on Dec 2, 2010 3:36 AM

If you want to do in Transformation Layer :
You can use routine ...break up the seconds into minute hour and seconds
you will have to handle few cases in this:
let say your variable lv_seconds holds the number of seconds you want to convert to hour min and seconds
DATA: lv_seconds type i,
           lv_hrs type i,
          lv_sec type i,
          lv_min type i.
lv_hrs = lv_seconds / 3600
if lv_hrs >= 1.
lv_min = (lv_hrs - trunc(lv_hrs))*60
here again handle seconds if min >60.
else.
lv_hrs = '00'.
lv_min = lv_hrs*60
It is just hint ..how you can manipulate the seconds to get it...you will have to think about the complete algorithm
Regards,
RK

How to use temporary interface in another interface as derived table in 10g

Hi ,
Can somebody please tell me how to use temporary interface in another interface as derived table in 10g.
I have an option in odi 11g to this task.But i am working on odi 10g for my project.So that please help me to do this task.
I can able to create temporary interface in 10g ,but i dont know how to use that temporary interface in another inerface as derived table.
Thanks in Advance
Thanks,
Srikanth A

A temp interface CANNOT be used as a derived table in ODI 10g.
All you can do is to drag and drop the temp interface as the source in the mapping.
PS. Please remember to assign correct/helpful points to the people who help you in the forum.

In SQLScript, how to use EXEC to call another procedure with parameters in procedure?

Hi experts,
In SQLScript, How to use EXEC to call another procedure with input and output parameters in procedure？thanks very much

Hi Sagar,
thank you! I generate another procedure with an input parameter and an output parameter in a procedure. Then i need to call the generated procedure using EXEC. Here is my code:
create procedure ftest1(out sum_num bigint)
as
begin
declare fa_output bigint;
declare v_sql_drop varchar(200);
declare v_sql varchar(500);
declare cursor c_cursor1 for select num from TABLE1;
--v_sql_drop := 'drop procedure fe';
--exec v_sql_drop;
v_sql := 'create procedure fe(in i_num bigint,out o_num bigint) as begin';
v_sql := :v_sql || ' o_num := :i_num * 2 + :i_num * :i_num;';
v_sql := :v_sql || ' end';
exec v_sql;
open c_cursor1;
for c_item as c_cursor1 do
exec 'call fe(c_item.num,o_num=>fa_output)';
if sum_num is null then
sum_num := fa_output;
else
sum_num := :sum_num + fa_output;
end if;
end for;
close c_cursor1;
end;
The underline code is using exec to call the generated procedure. But this method cannot work. Any suggestion? thanks again!

How to use a dictionary for multi languages when displaying mess

how to use a dictionary for multi languages when displaying messages??

1st you have to define new messages in the dictionary:-
1.     We have to open the application.
2.     Functional administrator responsibility.
3.     Core services.
4.     Messages.
•     Create message button.
•     Now fill the name of the message that we want to call it from our code in the Code field.
•     Fill the application name with short name of the application.
•     Choose the language.
•     Set the text you want to be displayed.
2nd, Now in the CO in the in the process form request you will code throw new OAException ("application short name","Code").
Now run and see the result.
3rd we want to use Arabic messages, use the same one you have created for saving as an example but you choose duplicate and set the language Arabic.
•     Run the page.
•     Choose preferences.
•     Current Session language = Arabic.
Now you can see the result.

How to create process chains,and how to use process like and or xor

Hi,
How to create process chains,and how to use process like and or xor.
can any one please give me a example in each.
Thanks,
cheta.

Hi Cheta,
Here is step by step procedure to create process chains
Process chain is nothing but executing a process ..(or) loading the data any process we can do in background.. that means.. automatically we can execute our process based on Time or any event..
Creating Process Chains
Prerequisites
If you want to include a load process in the process chain, you need to have already created an InfoPackage.
You cannot load flat file data from a client workstation in the background. For this reason, you have stored your data on an application server.
Creating Process Chains
You have the option of creating a process chain in the process chain maintenance screen directly or by using a maintenance dialog for a process:
Creating a Process Chain Directly in the Process Chain Maintenance Screen
You are in the BW Administrator Workbench.
1. Click on the Process Chain Maintenance icon in the AWB toolbar.
The Process Chain Selection dialog window appears.
2. Choose Create.
3. Enter the technical name and a description of the chain, and confirm your entry.
The Add Start Process dialog window appears.
4. Create a variant for a start process.
1. a. On the Maintain Start Process screen, choose whether you want to schedule the chain directly or whether you want to start it using a metachain.
2. b. If you choose to schedule the chain directly, enter the start date value for the chain under Change Selections and save your entries.
The Maintain Start Process screen appears again.
3. c. Save your entries, return to the previous screen and confirm your entries in the Add Start Process dialog window.
You are taken to the Plan View of the process chain maintenance screen.
In the left-hand area of the screen, a navigation area is displayed. In the right-hand area of the screen, the process chain is displayed.
5. Use the drag-and-drop function to add the relevant processes into your process chain.
You use the Process Types function to select the processes. This sorts the process types according to different categories. You can also call up InfoPackages and processes for the data target from the separate InfoSources and Data Targets navigation trees.
Hope this helps
Regards
Karthik

How can one process "ask" if another process is running?

Hi there,
This is a very general question: how can one process "ask" if another process is running?
In other words, what 2 process share together.
Thanks for any help.

This code will print all active Threads.
Look at at the API docs for further information.
ThreadGroup tg=Thread.currentThread().getThreadGroup();
        while(tg.getParent() != null)
            tg=tg.getParent();
        tg.list();

Program name for E-mail processing routines for o/p type NEU

Hi Friends ,
What is the program name for E-mail processing routines for o/p type NEU for purchase order . This i want use this for send PO for vendor .
RB

Hi
Program SAPFM06P
Form Routine ENTRY_NEU
Form MEDRUCK
Transmission Medium - External Send

How to use time capsule for wireless back-up but not internet?

Hello,
I have a tower and recently a laptop at work. The tower is connected to our local network with an ethernet cable and the laptop with wireless. So, the internet connection is fine for both.
I was hoping to use my time capsule to do time machine backups on my laptop. Do you have any advice on how to configure this? I do not want to use the time capsule to extend my Internet, as I believe my work I.T. would prefer to handle all access to their network.
Perhaps there is some documentation about doing this that you could point me to? I have not been able to find it.
Thank you for your help.

Your original question was How to use Time Capsule for wireless back-up but not Internet?
There is no reason for you to connect the tower....or anything else...using Ethernet if your goal remains that same as you stated.
If you are asking if you can backup the Tower using Ethernet, and not wireless, then you can connect the tower to one of the LAN <-> ports on the Time Capsule....not the WAN port.
Yes, it appears to work without plugging into my tower.
Correct, it will work.
I just have to select the network that it created. Of course, I have no access to the Internet while this is happening and it can not auto backup, unless I am on that wireless signal.
As I stated, that is the downside to trying to back up without an Internet connection. You have to establish another network...and backup over that network.
If you are asking if you can stay connected to the work network while also backing up to your non-Internet "private" network, that is not possible.

How to use Nokia mail for exchange

How to use Nokia mail for exchange for N82 so that it can push mails for gmail,yahoo.

It appears that what you are looking to do is from another product at Nokia called Nokia Messaging. Go to mail.nokia.com and setup a messaging account and add the gmail and yahoo accounts there. Then SMS send the configuration program to your device. Install it. it will add all the accounts to your device on install and will send messages to your device. So at this point you will have Mail for Exchange for you corporate mail and Nokia Messaging for you personal mail ( gmail and yahoo).

How to use Batch operation for two xsodata services?

Hi All,
I have two xsodata services. How to use submit batch for two xsodata services
Thanks,
Mj

Gateway Batch Calls from SAPUI5

How to use same actions for differ pop-up

Hi gurus,
I am using 2 popup in a view.same popup's having same buttons 'Yes', 'No'.when i use 1st one i have to create an action for that Yes button where i put my code for that particular Action.
But when i used 2nd one the action define for that is not acceptable with differ name.it takes only standard one.
Now my Query is : How to use same actions for differ pop-up buttons with in a similar view?Where i put my code.
Plz sugges me.
Points will be sured.
Sanket sethi

Hi,
Take one integer value attribute in the context of view
when you r performing action on POP1 set it's value to 1
when you r performing action on POP2 set it's value to 2
create one method which receives integer argument, say diaplay(int a)
In the action call display(wdContext.currentContextElement().get<intvariable>()) by passing the value in the context attribute
in display() method, Check the value of integer variable..
if it is 1 then perform action related to POP1
if it is 2 then perform action related to POP2
Regards
LakshmiNarayana

How to use processing routine 2 for another smartform in nace

Similar Messages

Maybe you are looking for