How tomaintain product revenue when the oppty is in sales stage Closed/Lost

When the opportunity is in the closed/lost stage the product revenue is always zero. How can we move the opportunity to closed/lost but still maintain the revenue values for the products.
We use the product revenue to report opportunity revenue...
thanks..

I always use "Opportunity-Product History" for my pipeline reports. In this subject area "Product Revenue" is available for Opportunities which are "Closed/Lost". I would log this as a bug with Oracle as it clearly should not set the Product Revenue to 0 in the Product History subject area.
In this subject area I can create reports and trace back Opportunity Revenue and Product Revenue. I have multiple pipeline reports running at both levels which are accurate for mutiple deals. If you do decide to use this subject area beware of the following:
- Dont use the Sales Stage or Probability Successs % at Product level as it does not update as a user steps through the sales stages. Use the opportunity details for accuracy
- If you want a weighted product revenue calculate this based on the Opportunity Probability % and the Total Product Revenue, do not use the out of the box metrics
Regarding your second question, Opportunity Revenue puts the total opportunity amount in your pipeline on the date of the opportunity close date. It also gets updated when a user adds a product and presses the "Update Opportunity Totals" button, this sets the Opportunity Revenue to the total of the Product Revenue from the products you entered. Sometimes users forget to press this button and the revenue is out of alignment. Opportunity Revenue can also be updated if you have the setting "Product Averaging" enabled in your company profile, this takes an average of the Product Revenue and updated the Opportunity Total when a user presses the "Update Opportunity Totals" button. These metrics are updated each evening, you are using the History subject areas which take 24hours to refresh. Does that answer your question?

Similar Messages

How do I know when the buffer flushed all the data out?

I am using a very high sampling rate (500000 Hz) and acquire 1024 data points continuously. It takes 370000 data points in 10 second. I use a counter to help with the retrigger PFI line. I have a huge buffer so that I can make sure that the buffer is not overflowed. The code is attached below. My problem is that the data acquisition is done so fast (in 10 seconds) but the processing of the data is not. In :nEvent, I basically save and plot the data. The saving process is not slow. However, our videocard is so SSSSLOOOW and can not keep up with realtime data display. After the user is done collecting the data, they do not want to wait for the screen to plot the data from the buffer. So after the data collection is done, I basically stop the plotting process but we still need to flush the data out from the buffer for saving. My question is that how can I tell when the buffer is empty.
Thanks,
Yajai
m_task = std::auto_ptr<CNiDAQmxTask>(new CNiDAQmxTask("aiTask"));
m_counter = std::auto_ptr<CNiDAQmxTask>(new CNiDAQmxTask("coTask"));
m_task->Stream.Timeout = -1;
//Create a channel
m_task->AIChannels.CreateVoltageChannel(physicalChannel, "",
static_cast<DAQmxAITerminalConfiguration>(DAQmxAITerminalConfigurationRse), minimum, maximum,
DAQmxAIVoltageUnitsVolts);
m_task->Timing.ConfigureSampleClock(counterSource, sampleRate,DAQmxSampleClockActiveEdgeRising,DAQmxSampleQuantityModeContinuousSamples, samplesPerChannel);
m_task->Stream.Buffer.InputBufferSize = samplesPerChannel * 2000;
m_counter->COChannels.CreatePulseChannelFrequency(counterChannel, "coChannel", DAQmxCOPulseFrequencyUnitsHertz, DAQmxCOPulseIdleStateLow, 0, sampleRate, 0.5);
m_counter->Timing.ConfigureImplicit(DAQmxSampleQuantityModeFiniteSamples, samplesPerChannel);
m_task->Control(DAQmxTaskVerify);
m_counter->Control(DAQmxTaskVerify);
m_counter->Triggers.StartTrigger.ConfigureDigitalEdgeTrigger(
referenceTriggerSource, DAQmxDigitalEdgeStartTriggerEdgeRising);
m_counter->Triggers.StartTrigger.Retriggerable = true;
m_taskRunning = true;
m_counter->Start();
// Set up the graph
m_Graph.Plots.RemoveAll();
for (unsigned int i = 0; i < m_task->AIChannels.Count; i++)
m_Graph.Plots.Add();
m_Graph.Plots.Item(i+1).LineColor = m_colors[i % 8];
// Create Multi-channel Reader
m_reader = std::auto_ptr<CNiDAQmxAnalogMultiChannelReader>(new CNiDAQmxAnalogMultiChannelReader(m_task->Stream));
m_reader->InstallEventHandler(*this, OnEvent);
m_reader->ReadMultiSampleAsync(samplesPerChannel, m_data);

Yajai,
I'm a little confused about your acquisiton. Do you intend for it to be
finite, or continuous? I'm also unclear about your rates. You state
that you are acquiring 1024 samples at 500kHz, yet you get only 370k
samples in 10 seconds. Are you periodically acquiring 1024 samples at
500kHz? Do you do any reads other than the final m_reader->ReadMultiSampleAsync(samplesPerChannel, m_data)? Could you provide the code where you stop the plotting process?
Thanks,
Ryan V.
Ryan Verret
Product Marketing Engineer
Signal Generators
National Instruments

With a PDF Dynamic form using show/hide actions, how to ensure that when the completed form is saved, closed and re-opened, the form still show the fields as before it was closed?

With a PDF Dynamic form using show/hide actions, how to ensure that when the completed form is saved, closed and re-opened, the form still show the fields as before it was closed?
I have developed a form with fields hidden by default, that become visible based on box ticked or radio button selections.
My problem is that, when I close the form and re-open it, it comes back to it's default presentation, regardless of the information already recorded in the form (including in the now hidden fields.
How to correct that
Thanks in advance for any hint you can provide.

I've had the same problem. This solved it...
Go to the "Form properties..." in the File-menu. Select "Run-time" to the left and in the box "Scripting" Preserve scripting changes to form when saved: choose Automatically (Script-based state changes are saved locally in an insecure fashion. This option cannot be used for certified forms).
Hope it works for you to...

Why am I not allowed to activate my product, CS3, when the product is bought years ago and I still have the serial number? It's an old version, but I don't throw products in the bin, just because they are old.

Why am I not allowed to activate my product, CS3, when the product is bought years ago and I still have the serial number? It's an old version, but I don't throw products in the bin, just because they are old.

And what exactly is your problem? Other than going of on a tangent about Adobe's alleged evilness preventing you to activate whatever CS3 product, you have not provided any useful info such as what exact problem you have, what system, what product we are axctualyl talking about and so on.
Mylenium

How we can see when the condition records created.

Hi,
How we can see when the condition records created ( Valid from and Valid to ) ? And also how we can see the changes made in the Condition records?
Regards,
jyothi.

Hello,
you can display the condtion records in transaction VK13.
Here you have the posibillity to display the changes of the condtion records.
Please goto VK13
> Enter your selection criteria
> Enviroment
> changes
But you can also create a condtion list. and the you can display more than one condition record:
Please have a look at the transation V/LD - Pricing Report
For example: conditon list 14 for taxes.
Here you get an overview of tax condtions.
I hope that the information are helpful.
Regards
Claudia
If you are satisfied with the answer, please give Reward Points.

HT1459 My I pod is not responding how do I know when the ipod had actually died?????

my ipod has the green lights however when i try to listen to music ....nothing ....i tried several head sets. how do i know when the ipod is finally dead

Read the manual for a solution - iPod Manuals

How do we know, when the service contract is last modified ?

How do we know, when the service contract is last modified and by whom ?
thanks
siva
Edited by: sivapara on Nov 24, 2008 3:14 PM

To add also in OKC_K_HISTORY_B for some actions.
Thanks
Nagamohan

HT4623 in the process of updating to ioS6, how do i respond when the screen says choose a network?

in the process of updating iphone5 to ioS6, how do I respond when the screen says choose a network?

Your device is in recovery mode. Connect the device to iTunes and the computer and follow the instructions in this support document. http://support.apple.com/kb/HT1808

How to get group when the data source from system instead of UME database

Hig guys,
How to get group when the data source comes from backend system instead of UME database?
I tried to use
IUMPrincipal RefGroup = WPUMFactory.getGroupFactory().getGroup(groupName);
But I was not able to get the group. But in "UserAdministrator", I can find this groupName.
Which kind of API can I use?
Thanks in advance!
Regards,
Liying
Message was edited by:
Liying Wang

Ok,
try this:
com.sapportals.portal.security.usermanagement.IGroupFactory ep5GroupFactory = userManagementService.getGroupFactory();
IGroupFactory groupFactory = UMFactory.getGroupFactory();
com.sap.security.api.IGroup group = groupFactory.getGroupByUniqueName(groupName);
IUMPrincipal ep5Principal = ep5GroupFactory.getEP5Group(group);
This should do the trick,
Romano
PS: and thanks for the stars!

How do you know when the music is synced to an ipod classic? I don't see it showing it in the window.

how do you know when the music is synced to the ipod?the lod version would show it syncing in the window at the top of the screen this version doesn't.

If you have access to a Mac couldn't you receive your verification via iMessage and work to view you iCloud Account?

How does production system takes the benefits of user exits

hi
could anybody tel me
how does production system takes the benefits of user exits

Hi,
you have to transport your implementation to your production system.
Regards
Bernd

How do we know whether the materials maintaine any sales org?

Hi All, as an ABAPer, how do we know whether the materials maintaine any sales org?

Hi,
1.Go to the Table MVKE (Sales Data for Material)
2.This relates the material with sales organization & distribution.
3.Give the sales Organization and u will find all the material that correspondance to the sales org.
Regards,
Jagadish

Settling production variances when the price control of the material is "V

Hi,
Scenario: 1) Materials are maintained at moving average price.
                2) Production variances need to settle to material and MAP need to be adjusted.
Issue: When the closing stock of the material is less than the negative variance need to be settled from the production order   the system is giving the message "Moving average price for material is negative"
Questions: 1) What is the solution for settlement of negative variance to material when there is no stock?
                   2) Is there is any way to settle these variances to price difference account only when the stock is not available. if stock is available the variance has to adjust the stock, if not settle to the price difference account. Is there anys standard settling for this?
Advance thanks for your help
Regards
Koteswararao Padarti

Hi Rao
You should never have Price Control V for In House made material...
That will ruin your inventory valuation forever.. Consider the eg below if your price control is V
1. Your moving price in mat master is 100 USD
2. You Mfr on Jan 1 @ Actual cost = 110 in Prod order and Qty = 1.
Upon GR, GR will happen @ 100 and at period end if Qty is lying in stock, 10 variance will also be inventorized
BUT, now consider this
1. 1. Your moving price in mat master is 100 USD
2. You Mfr on Jan 1 @ Actual cost = 110 in Prod order and Qty = 1.
Upon GR, GR will happen @ 100 and variance lying is 10 in prod order
3. You Mfr on Jan 10 @ Actual cost = 110 in Prod order and Qty = 1.
Upon GR, GR will happen @ 100 and variance lying is 10 in prod order
4. On jan 15, you consume Qty 1 and qty lying in stock is 1
5. In period end, when you do settlement, following will happen
a. For prod order 1: Qty Mfd 1 and Qty lying in stock 1 - Result: variance 10 will be inventorized.
Mvg Avg price will shoot upto 110
b. For prod order 2: Qty Mfd 1 and Qty lying in stock 1 - Result: variance 10 will be inventorized.
Mvg Avg price (MAP) will shoot upto 120
System wont check whether the qty lying in stock pertains to prod order 1 or 2... It will simply check if the Qty of prod order matches with qty lying in stock. hence, it will keep on inventorizing variance in this case.... and your MAP will touch the sky
Regards
Ajay M

How Do You Know When The Zen Touch Is Done Chargi

I searched through the forums and couldn't find anything on this topic.
I want to make sure that I don't overcharge my player, while still filling it to its enormous capacity. How will I know when it's done charging?

On my touch there is a little icon in the upper left corner of the screen showing my battery symbol with a power volt thing over it to show it is charging. This changes back and forth until the charging is done, then there is nothing on the screen at all.
-mrspike

How to know precisely when the revision of a content item is released?

Hi,
I have written a filter to handle delete event of content item revisions. Whenever a revision of a data file (WCM data file) is deleted my filter gets triggered and and checks for some criteria on our meta data. When the criteria is met it has to compare the contents of the revision that is deleted with the new revision. Since the revision will be deleted when my filter is exited, I copied the contents of the revision that is deleted and invoked a java thread with required document information.
In that thread I am checking for when the revision is successfully deleted so that I can read the contents of new revision and compare them with old revision.
For that I calling DOC_INFO_BY_NAME service from my thread and am checking until the following values for below meta data are in effect
dStatus=RELEASED
dReleaseState=Y
Unfortunately this is not working properly. I am still seeing the data file content of deleted revision only. For testing purpose I put a sleep of 10 seconds in my code instead of reading the meta data values which is making the code work as expected. I am to get the contents on new revisions after the sleep time. But I don't want to work this way as this is not a guaranteed mechanism.
How to know for sure when the revision is released?
Regards,
Pratap

Hope as you mentioned I would be able to use link manager. That would make my work much simpler. But just want to ensure that we both are on the same page relating to my requirements. I still feel there is some gap in what I have tried to explain and what you understood. May be I couldn't put it in simple words.
I will try my best to explain the requirements again in a simpler manner. This is only to ensure that I wouldn't end up spending lot of time in understanding new stuff but only to relaize at later time it may not work for me. I haven't used Link Manager before. That is why I am speculating a bit. I will start looking into the documentation of the Link Manager and Related Content to checkout if they work for me.
First thing is that the links are not just present in static lists. They can also be in content generated using WYSIWYG editors and Image elements.
Second when I talked about HTMLs they are not true content items. We are generating these HTMLs based on the structure of the site studio data file that is checked-in. I think it would be more clear if I add more details here.
The data files that I have been referring so far are bit complex. Our site studio contibution site allows creation of parent content items like detailed page, news articles etc and child items like RelatedSections, FAQ Items etc. The child items are referenced in the parent content items for organizing the parent content item's structure. All these site studio content items are XML files and each of them can internally contain links to other items. In fact the child items can have references to parents items or other childd items as static list (with link selector elements) and WYSIWYG editors are used while creating these content types (parent and child items).
Finally we generate the HTML only for parent items and display them on our portal. Child references are used only for defining parent item structure and the generated HTML for the parent item contains the details of child items. Our differentiation of parent and child is in the context. HTMLs that I have been talking so far are these ones only. They are not real content items.
The HTML will be generated when ever the parent item is updated and approved in the last step in our workflow. Now since parent item's HTML is dependent on child items, whenever a child item is updated and approved in the last step of workflow we should look up for all the parent items that are referring to this child and regenerate the HTML for those parent items using updated contents of this child.
Similar logic of HTML regeneration should be applied in the delete events.
Finally the revision related issues that I listed for data files apply for images as well. Since the images are also managed content items with multiple revisions they are maintained in site studio content items with their dDocName instead of its file file path and extension. Lets say an image is being referred in one of the parent content items and the image extension at the time it was initially used in the parent item is gif. The HTML contents for this parent that get generated will have gif extension for this image item. Now after some time if the user checks-in a new revision for this image item and lets say the extension now is png. But the HTML generated for the parent item is still having .gif in the img src attribute. Which means we need to re-generate the HTML in this case by checking where all this image item is referred.
If link manager can be helpful in meeting the above requirements it would be great. It shouldn't matter if there is bit of customization work involved.
Regards,
Pratap

How tomaintain product revenue when the oppty is in sales stage Closed/Lost

Similar Messages

Maybe you are looking for