HT4314 Game Center problem. When I try to start a new Letterpress game, I get the message "Unable to create match please try again later. When I press "OK" I get the following message, " Error starting game. The requested operation could not be completed

...I get the following message, "Error starting game. The requested operation could not be completed because local player has not been authenticated".
Can anyone advise me how to resolve this please?

You should contact the developer of the game for assistance.

Similar Messages

When I try to access GameCenter on my Mac it says "The requested operation could not be completed due to an error communicating with the server." How can I fix this?

When I try to access GameCenter on my Mac it says "The requested operation could not be completed due to an error communicating with the server." How can I fix this?

This usually caused by a customised hosts file.
These need to be the only entries in your /etc/hosts file:-
# Host Database
# localhost is used to configure the loopback interface
# when the system is booting. Do not change this entry.
127.0.0.1       localhost
255.255.255.255 broadcasthost
::1             localhost
fe80::1%lo0     localhost
Remove anything below these entries, then try and reconnect with GC. Once GC starts properly you can put the extra entries back in your hosts file, GC should start normally afterwards.
https://discussions.apple.com/message/19276629#19276629
Jerry

Bug: Unhandled Exception: System.IO.IOException: The requested operation could not be completed due to a file system limitation

Hello, I have a 35GB text file that I'm copying from one folder to another folder via c#
(I simply open a StreamReader and a StreamWriter and copy line by line (something like sw.WriteLine(sr.ReadLine());)
If [the destination folder is a "windows compress folder" (right click folder > properties > Advanced > Compress content to save disk space)] then it fails else it works well.
Any idea how to solve the issue?
I have windows 8.1 with all latest updates. The ssd is a samsung 850 pro, and I tried on 2 machines, same results.
So to recap, it seems the issue is with the writing of big files on a compress folder, the reading is fine.
thanks.
w
Error:
2015.01.08 10:15:27] Unhandled Exception: System.IO.IOException: The requested operation could not be completed due to a file system limitation
[Err, 2015.01.08 10:15:27]
[Err, 2015.01.08 10:15:27] at System.IO.__Error.WinIOError(Int32 errorCode, String maybeFullPath)
[Err, 2015.01.08 10:15:27] at System.IO.FileStream.WriteCore(Byte[] buffer, Int32 offset, Int32 count)
[Err, 2015.01.08 10:15:27] at System.IO.FileStream.Write(Byte[] array, Int32 offset, Int32 count)
[Err, 2015.01.08 10:15:27] at System.IO.StreamWriter.Flush(Boolean flushStream, Boolean flushEncoder)
[Err, 2015.01.08 10:15:27] at System.IO.StreamWriter.Write(String value)
w.

Hi w,
Per my understanding. This is not a C# code issue. I doubt the issue related your OS.
After search the error info,
here is a possible solution, please take a look
“The requested operation
could not be completed due to a file system limitation.”
<copied>
Please use Disk Defragmenter to defrag the NTFS volume on your side, which should fix this issue.
Please refer to:
A heavily fragmented file in an NTFS volume may not grow beyond a certain size
http://support.microsoft.com/kb/967351
For the limitation of NTFS, please check the following online guide.
How NTFS Works
http://technet.microsoft.com/en-us/library/cc781134(WS.10).aspx
</copied>
Best of luck!
Kristin
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

The requested operation could not be performed because OLE DB provider "MSOLAP" for linked server does not support the required transaction interface.

I am getting the following error when attempting to INSERT the results of an "EXEC(@MDXQuery) at SSAS LinkedServer":
The requested operation could not be performed because OLE DB provider "MSOLAP" for linked server does not support the required transaction interface.
Here is code that illustrates what I am doing:
DECLARE @MDX varchar(max);
SET @MDX='
SELECT
[Measures].[Extended Service Count]
} ON COLUMNS,
NON EMPTY [Organization].[By Manufacturer].[Manufacturer]
ON ROWS
FROM (
SELECT
{[Organization].[Org Tree].&[2025],[Organization].[Org Tree].&[2040]} ON 0
FROM [MyCube]
/* Test 1 */
EXECUTE(@MDX) at SSASLinkedServer;
/* Test 2 */
DECLARE @ResultsB TABLE (
Manufacturer varchar(255)
, ExtendedServiceCount float
INSERT INTO @ResultsB (Manufacturer, ExtendedServiceCount) EXECUTE(@MDX) at SSASLinkedServer;
Test 1 succeeds, returning expected results, and Test 2 fails returning the error mentioned above.
Other articles I've found so far don't seem to apply to my case. I am not creating any explicit transactions in my code. When I use OPENQUERY, I am able to do the insert just fine, but not when I use EXEC @MDX at LinkedServer.
Unfortunately in some variations of the query, I run into the 8800 character limit on OPENQUERY, so I need to use this other approach.
Any ideas?
-Tab Alleman

Hi Tab,
In this case, SQL Server Analysis Services doesn’t support Distributed Transactions by design. Here is a similar thread about this issue for your reference, please see:
http://social.technet.microsoft.com/Forums/en-US/8b07be45-01b6-49d4-b773-9f441c0e44c9/olaplinked-server-error-msolap-for-linked-server-olaplinked-server-does-not-support-the?forum=sqlanalysisservices
One workaround is that use SQLCMD to execute the EXEC AT command and saved the results to a file, then import using SSIS.
If you have any feedback on our support, please click
here.
Regards,
Elvis Long
TechNet Community Support

When restoring an iPhoto library I got an "unexpected error" message and the operation could not be completed. Is my best choice to try again?

One of my external hard drives died. I had several iPhoto libraries in it. Fortunately, I used Time Machine to backup to a Time Capsule and I can see all the iPhoto library icons in Backups.
When restoring the first iPhoto library, after three hours, I got an "unexpected error" message and the operation could not be completed. Indeed, the restored library is smaller than the library in Backups. Is my best choice to try again and replace the restored library (which apparently must be missing some photos)? It would mean another 3 hours plus of restoration with fingers crossed...
Any suggestions? Thank you in advance!

I am always suspicious of using a different OS to the one that was used to run the backup.. ie if you used Snow L to backup then there is absolutely nothing wrong with using SL to restore.
Mount the TC sparsebundle and verify it using disk utility.
A5 here. http://pondini.org/TM/Troubleshooting.html
You might also like to load the widget in Time Machine so you get whatever the full error message is..
I cannot find any reference to the error code you are getting..
My recommendation would be to try it on a different computer.. restore the whole backup to an external drive large enough to accept the whole backup.
Use the manual methods pondini recommends.
http://pondini.org/TM/FAQ.html
Q16 17
Use ethernet only. Turn off wireless so it does not enter the situation.

Every time i try to create a new movie or a trailer an error message appear saying:"the operation could not be completed. no other information is available about the problem."

every time i try to create a new movie or a trailer an error message appear saying:"the operation could not be completed. no other information is available about the problem."

Open the iCloud preference pane and uncheck the Contacts box. Do the alerts stop?

When I try to make a new video, a window comes up that says,"The operation could not be completed," and then under it, it says,"No other information is available about the problem," what is happening and how do I fix it?

when I try to make a new video, a window comes up that says,"The operation could not be completed," and then under it, it says,"No other information is available about the problem," what is happening and how do I fix it?

Hi
And without info - it's near to impossibly to help. Try my general troubleshooting note:
Troubleshooting note
When iMovie doesn't work as intended this can be due to a lot of reasons
iMovie Pref files got corrupted - trash it/they and iMovie makes new and error free one's
problem in iMovie Cache folder - trash Cache.mov and Cache.plist
Creating a new User-Account and log into this
This forces iMovie to create all pref. and cache files new and error free
Event or Project got corrupted - try to make a copy and repair
a Codec is used that doesn't work (even though iMovie and/or iDVD tries to / they fail in the end)
version miss match of QuickTime Player / iMovie / iDVD
preferences are wrong - Repair Preferences
other hard disk problem - Repair Hard Disk (Disk Util tool - but start Mac from ext HD or DVD)
External hard disks - MUST BE - Mac OS Extended (hfs) formatted to work with Video
( UNIX/DOS/FAT32/Mac OS Exchange - works for most other things - but not for Video )
USB-flash-memories - usually do not work
Net-work connected hard disks - usually do not work (most often not fast enough and WRONGLY FORMATTES as DOS etc)
iPhoto Library got problems - let iPhoto select another one or repair it. Re-build this first then try to re-start iMovie. When iMovie starts-up it first look trough this iPhoto library and if faulty it all Halt’s.
This You do by
First - close iPhoto
Secondly - on start up of iPhoto - Keep {cmd and alt-keys down}
Thirdly - now select all five options presented
THEN - WAIT a long long time (>20 hours are not strange)
free space on Start-Up (Mac OS) hard disk to low (<1Gb) - I never go under 25Gb free space for SD-Video (4-5 times more for HD)
external devices interferes - turn off Mac - disconnect all of them and - Start up again and re-try
GarageBand fix - start GB - play a few notes - Close it again and now try iMovie
Screen must be set to million-colors
Third-party plug-ins doesn't work OK
Run "Cache Out X", clear out all caches and restarts the Mac
Let Your Mac be turned on during one night. At about midnight there is a set of maintenance programs that runs and tidying up. This might help
Turn off Your Mac - and disconnect Mains - for about 20-30 minutes - at least this resets the FireWire port.
In QuickTime - DivX, 3ivx codec, Flip4Mac, Perian etc - might be problematic - temporarily move them out and re-try
(I deleted the file "3ivxVideoCodec.component" located in Mac HD/Library/Quicktime and this resolved my issue.)
buenrodri wrote
I solved the problem by removing the file: 3ivxVideoCodec.component. after that, up-dated iMovie runs ok.
Last resort: Trash all of iMovie and re-install it
Yours Bengt W

What can be done to avoid getting the following error when trying to delete unused clips he operation could not be completed. *** -[__NSArrayM insertObject:atIndex:]: object cannot be nil

what can be done to avoid getting the following error when trying to delete unused clips in Imovie 09 "the operation could not be completed. *** -[__NSArrayM insertObject:atIndex:]: object cannot be nil" I use to get these type of error messages when trying to delete unsused clips from a large event 60 minutes or longer, but now I get this message when trying to reduce a 4 minute event.
Also, does anyone know if there is a limit to the total amount of space that can be taken up by Projects in Imovie 09
Thanks for any help

Zachy,
It goes something like this...
Put your new drive in the enclosure. Use Disk Utility to format it, etc. I'd give it a slightly different name than the original. Let's say you have Old Disk and New Disk as your drive names. Use Carbon Copy Cloner to copy Old Disk to New Disk. Now you should have an exact copy, which you can test by rebooting and holding down the Option key. Choose New Disk from the list and let it boot, make sure all is well.
Shut down and physically swap the drives. Take Old Disk and put it in the enclosure. Now your system has a new disk with a lot more space and you can reformat your old disk and just use it for large files or whatever.

Getting error message "the requested item could not be found" when trying to install Firefox on my android.

I had to uninstall Firefox for Android because I was having problems logging in to sync. I got a support e-mail to uninstall and reinstall because the sync issue had been fixed. I uninstalled the Firefox app and then when I tried to reinstall it I get the error message on my phone "the requested item could not be found." HELP!

Some supported phones are not displaying Firefox in the Market for some reason. We're still investigating this. You can check if your phone is supported here:
https://wiki.mozilla.org/Mobile/Platforms/Android
and then download the app directly from here:
http://ftp.mozilla.org/pub/mozilla.org/mobile/releases/4.0b3/android-r7/multi/
(Note: If your phone is from AT&T, you will have to search for instructions on "sideloading" the APK file, since AT&T disables the option to install from non-Market sources.)

Please help i can't share my project I did try in all of them and it doesnt work it apears like that........ The share operation Master File has failed The operation could not be completed because an error occurred when creating frame 608 (error -1). and

I did try in all of them and it doesnt work it apears like that........
The share operation Master File has failed
The operation could not be completed because an error occurred when creating frame 608 (error -1).
and i dont know what to do plese hlp me....
Re: when i try to share my project to quicktime aroun 50% appears error -1 and i can't share it what to do please help

Double post…

HT1766 Whenever I try to backup my ipad to iCloud, I get the following error message and can't work out why " the last backup could not be completed" I am connected to my wi FI and iPad off and connected to power. Please can anyone help ?

Whenever I try to backup my ipad to iCloud, I get the following error message and can't work out why " the last backup could not be completed" I am connected to my wi FI and iPad off and connected to power. Please can anyone help ?

In settings>general> cellular do you have it turned ON?

Bridge CS5 freezes after error message...."The operation could not be completed, there is not....

Error - The operation could not be completed. Not enough storage is available to complete this operation.
After this happens I have to close Bridge as it is unresponsive to any further commands and I often I have to use the task manager to close it.
I have scoured these boards and the web for a solution and have found others w/ the same problem (even people w/ much more RAM) but have not found a solution beyond the usual advice of changing cache settings, increasing page file, or making sure there is enough hard drive space.
I have two 1TB hdd's w/ over 80% free space on each but I only have 2 GB RAM (all my old motherboard can handle). However, this error message occurs even when Photoshop is not running (only Bridge) and my RAM usage meter shows that I still have plenty of unused RAM available. I did not have this problem w/ Bridge CS4. The error msg. of not enough storage doesn't make since considering the available RAM showing and ample space on the hard disk assigned to the cache (which is a different physical drive than my OS or the Bridge program.)
Here are some of the things I have tried:
reset Bridge preferences at startup, changed the location of the Bridge cache, its size and options, purged the cache, changed the page file size on both drives to the max, defragmented drives, disabled Norton anti-virus, etc.
-What else can I try?
-Would creating a new partition on my 2nd hdd to be used solely for the Bridge cache make any difference and if so, why?
Please help, I am willing to try anything to get this to work. It is a personal challenge at this point.... and I am determined to get Bridge CS5 to work on my machine......
Thanks in advance for any advice or insturctions you may offer!

Dear Customers,
I am Baichao Li, Adobe Bridge Quality Engineer.
Bridge team is investigating this error, In order to reproduce the problem in our lab and find a solution as soon as possible, I would like to ask you to help providing more information, please follow steps below,
1. Download "User Mode Process Dumper Version 8.1" from
http://www.microsoft.com/downloads/en/confirmation.aspx?familyId=e089ca41-6a87-40c8-bf69-2 8ac08570b7e&displayLang=en
2. Install "User Dumper" following Microsoft's article
http://support.microsoft.com/kb/241215
3. Open "Control Panel -> Process Dumper", switch to tab Page of "Processing Monitoring"
4. Click button "New", input "Bridge.exe" for "Application Name".
5. Select "Bridge.exe" from list box, then click button "Rules",
                Select "Use Custom Rules",
                Browse to a custom dump file folder,
                Check "All Exceptions",
                Check "Ignore Exceptions that occur inside Kernel32.dll",
                Select "Mini Dump Type" to "Small"
                Select "Save Mode" to "Cyclic Saving 5 times"
                Others keep uncheck or unselect.
6. Click "OK" button to exit "Rules" setting dialog, then Click "Apply" button, then click "OK" to quit "Process Dumper " dialog.
7. Launch Adobe Bridge CS5, do your work.
8. When that error message occurs, Bridge hang, wait for a while, then kill bridge using "Task Manager", please check if there are some ".dmp" files in "custom dump file folder " which is set in step 5, if so, please zip all .dmp files and FTP to us (please contact me at [email protected] for FTP info). It would be better if you can repeat your hang and send us more zipped .dmp files.
Sincerely appreciate if you could provide us your workflow before Bridge throws that error message, what file formats you use, what features you use and your machine information.
Best Regards,
Baichao Li

Error 8062 when I try to copy or move files on my macbook: "This operation could not be completed because an unexpected error occurred (error code -8062)". Can even not install new software now!!

Since a few days when I try to copy or move files on my macbook, I often get an error message saying "This operation could not be completed because an unexpected error occured (error code -8062)". And then it just quits the copy or move.
I searched a lot on the internet, but only found solutions for cases you cannot empty the trash due to this issue.
I tried those solutions for my trash and that helped after some trying.
However, I still have the problem with copying and moving files.
I even cannot install new software now, as it has to copy itself to the programs-directory, and gives the same error-message.
Who can help me??
Cannot seem to find any info on it on the support-forums or elsewhere.
My user-account is administrator, I use a 13" Macbook Aluminium (Late 2008). Mac OS X 10.6.8 CPU 2Ghz Intel Core Duo, RAM: 4GB 1067 MHz DDR3.
Any help would be greatly appreciated...
Otto

Tips I received so far (thanks to A-Mac via Twitter http://www.a-mac.nl and Remco Kalf http://www.remcokalf.nl/)
- make sure you have at least 10% of your harddisk in free space (I had only 5%).
- do a PRAM-reset (http://support.apple.com/kb/ht1379)
- perform a hardware test (http://support.apple.com/kb/HT1509)
- make a complete backup (with for example Carbone Clone Copier, see http://www.bombich.com/)
- after complete backup: use diskwarrior (boot from Diskwarrior DVD, first perform diagnostics, then perform "Rebuild" which rebuilds your file directory).
So far I only cleared up some space on my HD, and already the problem occurs less.
Still, I will go through the other tips too.
(will post progress)

Contacts application error: The Operation could not be completed. No other information is available about the problem.

I get about one or two of these error messages, from Contacts each day: "The Operation could not be completed. No other information is available about the problem." It seemed to start after I deleted some of what appeared to me to be the duplicate cards between "On My Mac" and iCloud. I have Contacts version 9.0 in OS X 10.10 Yosemite on a MacBook Pro (15-inch, Early 2011). Anyone else seen this error?

Try the following..
Compress the audio files before uploading them to Google.. using Apple's built in file compressor... (Right/Control click on an audio file and choose compress from the popup menu...
Download from Google and then decompress audio files..
Now test in Logic and see if you get the same issue....

Contacts error: The Operation could not be completed. No other information is available about the problem.

I get about one or two of these error messages, from Contacts each day: "The Operation could not be completed. No other information is available about the problem." It seemed to start after I deleted some of what appeared to me to be the duplicate cards between "On My Mac" and iCloud. I have Contacts version 9.0 in OS X 10.10 Yosemite on a MacBook Pro (15-inch, Early 2011). Anyone else seen this error?

Thanks! I looked at the Busycal post:
          To fix this, open System Preferences > Security & Privacy, select Contacts in the left sidebar, then check BusyCal.app.
On my system, only Skype, Parallels, and Contacts Cleaner are enabled to access contacts.
FYI, LinkedIn doesn't list any apps as having asked for, or been given access.
          If that doesn't work, here is a bigger hammer:
OK
          1) Launch Terminal in /Applications/Utilities.
          2) Paste the following text and hit return:
               tccutil reset AddressBook
First, I want to see what that does so I ran man tccutil
     NAME
          tccutil -- manage the privacy database
     SYNOPSIS
          tccutil command service
     DESCRIPTION
          The tccutil command manages the privacy database, which stores decisions the
          user has made about whether apps may access personal data.
          One command is current supported:
          reset    Reset all decisions for the specified service, causing apps to prompt
                   again the next time they access the service.
     EXAMPLES
          To reset all decisions about whether apps may access the address book:
                tccutil reset AddressBook
          3) Quit Terminal.
          4) Launch BusyCal, and click OK when asked whether to allow access to your contacts.
Now I see under System Preferences->Security&Privacy->Privacy->Contacts that all apps were removed from the list.
I haven't had BusyCal in years so I just launched Calendar and Contacts.
Unfortunately, as soon as I launch Contacts, I get the pop-up again about the LinkedIn

HT4314 Game Center problem. When I try to start a new Letterpress game, I get the message "Unable to create match please try again later. When I press "OK" I get the following message, " Error starting game. The requested operation could not be completed

Similar Messages

Maybe you are looking for