I able to copy and paste files from external hard drive to mac, but not the other way around. Please suggest. Thanks
I m able to copy and paste selected files from external hard drive to my mac but not the other way around. Im not able to copy files from Mac to external hard drive.
The same is working fine with USB flash memory.
Please help.
Vijay Raymond Daniel wrote:
The only thing is we need to buy this software. if there is a free solution to inter change files between NTFS and HFS it would be better,
Don't use NTFS, remove your data off it first and change the format to something the Mac and PC can read, but doens't cost money or require software.
Drives, partitions, formatting w/Mac's + PC's
Similar Messages
-
I'm not able to copy and paste files from my mac to hard disk and usb. I have tried dragging the items I want to copy to those devices but it won't work. I also have tried copying and pasting those files onto those devices too but that doesn't work too. Can any one help?
Hi BobRz
Thanks for you suggestion but it didn't work - are there other ways for solving this problem? Or is it because my files that I want to copy and paste onto my hard disk etc are too big? (However there is space on my hard disk and it works on a PC) -
Why does the clone stamp work when I go from a darker color to a lighter color but not the other way around? How can I lighted a dark area? The Lasso tool takes from the wrong area.
c.pfaffenbichler wrote:
Why do you use the Blend Modes Lighter and Darker at all in this case and not simply Normal?
And what kept you from posting a screenshot?
I borrowed the image below for an HDR workshop I ran at the 2010 PSNZ National Convention, to demonstrate a method of removing halos. You'll remember that halos were a serious problem with early HDR, and while the halos in this image were caused by over sharpening, they are perfect for demonstrating this technique.
It relies on the fact that halos so often tend to put a lighter tone between the two areas where sharpening is being applied. Whether that is the sky abutting a dark line of hills, or the rock and little tower as in this image. I've uploaded it at the size it was supplied to me at (about 2700 pixels wide). So
Click to open the full image, right click and copy, and paste into Photoshop.
Select the clone tool, and set its blend mode to Darken.
Try to sample on a line horizontal to where you want to clone, to give the best tonal match, and start cloning.
Because the sky is darker than the halo, it overwrites it. But the rock is darker than the sky, so it has no affect.
It works even better if you clone on a new layer also set to Darken. No masking, just Photoshop blend mode magic.
You can also fix the little tower. Use a great big brush — just remember to sample horizontal to match the horizon.
Back then I was using the same trick with CAs after forgetting to fix them in ACR, and having done too much work to start again after spotting the problem. -
Trying to connect my iMac to on 10.8.2 with PowerBook Intel on 10.5.8; sharing works from PowerBook to iMac but not the other way around. Why?
Thanks for the interest. Preferences are similar on both machines: screen sharing, file sharing, printer sharing & scanner sharing all ticked and radio button for Screen Sharing is ON.
My confusion is that I can get a network connection to the iMac by selecting "go to server" on the PowerMac running 10.5.8 but am unable to make the iMac connect to the PowerMac using similar selections. When ethernet cable is plugged in the PowerMac shows up on the finder bar on the iMac, but it does not allow either screen sharing or connection to occur - a dialog box tells me to check System Prefs and Network connection.
I'm hoping to export a large file of photos from iPhoto on my iMac to my wife's PowerMac and hoped to achieve this with an ethernet network connection. -
I have programmed iCal and Address book to sync via MobileMe. The info I type in iCal on the MacBook Pro get updated on the iPad, but not the other way around. Any hints?
Levi G B ... Also found another thread by Davidfromsurfside on 10/14/11 0703A with the same problem. I responded on his thread "I have the same problem. IOS5 on iPad1, iPad2 and iPhone4S all with iCloud on. Lion 10.7.2 installed on my MacBookPro and iCloud set up/on. Any new iCal entry on either iPad or on the iPhone ends up via iCloud on both iPads and iPhone. BUT NOT ON THE MacBookPro. And iCal entry on the MacBookPro does NOT GET SENT to iCloud.com or to either iPad or the iPhone. This is a huge problem for me because I do all my office scheduling on the iPad or iPhone but rely on the MakeBookPro to print out daily client lists. I REALLY need to get this fixed...it is causing major business issues. " No one so far has had a fix.... :(
-
How do I get photos from my I phone onto my I pad? Photo stream works I pad to I phone but not the other way round?
Photostream only syncs photos over Wi-Fi, make sure you are connected to Wi-Fi to begin with.
Photostream only syncs when the camera app is closed, ensure it is closed.
Photostream only syncs when the battery is above 20%, try recharging the device
Try disabling photo stream on your device (settings > iCloud), restarting your device and then re-enabling photo stream.
If this doesn't help you may need to reset photo stream. You can do this at icloud.com by clicking on your name in the top right corner and then the advanced settings in the pop-up dialogue box that appears.
Note: disabling photostream and re-enabling it will result in any photos that are currently in the photostream album on your device, that are older than 30 days old, not being added back. -
Hi All
I've been trying to trudge my way through an issue our client is having but I'm getting nowhere fast. This issue was discovered when searching for why users at our second site were experiencing slow logons every morning (5-10minutes to login).
Within our domain there are two domain controllers for the child domain we manage.
DC1 has connection back to the parent DC's (managed by our clients parent company), and also replicates both ways with DC2. DC2 is at another site, on another subnet and replicates to and from DC1 only.
DC2 appears to have no issues, it can resolve any address, nslookup either using itself or DC1 is fine and name servers resolve fine.
DC1 has massive issues with DC2 - using it for nslookup gives me the following:
I get this timeout error for internal and external names, but both DC's are able to ping and access internet with no issues.
When trying to resolve name servers from DC1, DC2 sits at 'validating' for a while and then comes back with 'a timeout occurred during validation'.
Restarting DNS Server, NETLOGON and registering in DNS from DC2 had DC1 talking to it fine for a few minutes, but then it went back how it is (and I haven't been able to replicate this fix since).
Reverse DNS zones are setup for all the subnets used, there are A records and PTR's for both DC's.
Performing 'ping -a dc2.ip.address' from DC1 comes back fine - it knows what it is in both directions (name and IP) but nslookup and nameserver resolution is still failing.
I just don't know where to go from here - from everything I've read they should be happy... Any ideas?Hi,
When NSLOOKUP starts, before anything else, it checks the computer's network configuration to determine the IP address of the DNS server that the computer uses.
Then it does a reverse DNS lookup on that IP address to determine the name of the DNS server.
If reverse DNS for that IP address is not setup correctly, then NSLOOKUP cannot determine the name associated with the IP address.
http://support.simpledns.com/kb/a90/nslookup-cant-find-server-name___-default-server-unknown.aspx
Also refer to:
How to fix NSLOOKUP Default Server: UnKnown?
http://www.randika.info/2013/01/how-to-fix-nslookup-default-server.html
Regards.
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected] -
Why I am not able to copy and paste photos from my desktop to my Itouch?
I am not able to copy and paste photos from my computer to my Itouch. I use to be able to do it. Now there is an error message that says my device is wither disconnected or stopped responding.
But when I plugged in the Itouch, it still shows on my computer, still able to see my existing pictures in it. Just not able to paste/drag any new pictures into the folder.
Anyone has this problem and able to solve it?
Thank you.Hi BobRz
Thanks for you suggestion but it didn't work - are there other ways for solving this problem? Or is it because my files that I want to copy and paste onto my hard disk etc are too big? (However there is space on my hard disk and it works on a PC) -
How do I copy and paste files from a windows remote server to my mac?
How can i copy and paste files from a remote server (windows) to my mac? i have installed cord to connect to the server but now i can´t cpy the files to my mac!
Hi Sara. Tanks for responding. If I cannot figure this out (I was up
until 2am last night), I want to cancel my subscription.
Here are two files you can check on/help me with. When I try again, it
comes up 'an error has occurred when trying to access the service.'
Please advise.
Pat Tomassi
In a message dated 11/1/2014 12:55:23 A.M. Eastern Daylight Time,
[email protected] writes:
How do I copy and paste text from a converted Word document?
created by Sara.Forsberg (https://forums.adobe.com/people/Sara.Forsberg)
in Adobe Acrobat.com Services - View the full discussion
(https://forums.adobe.com/message/6888908#6888908) -
I used to be able to copy and paste images from the internet into keynote slides and pages. Now when I copy and paste all I get is an empty box. My iskysoft iTube studio has also stopped downloading videos. Is there an extension I need to enable? Any ideas
Try dragging the image to the desktop, then drag the image to the slide you want it on
-
Why is it no longer Possible to Copy and Paste files from Illustrator CC to Fireworks?
Why is it no longer Possible to Copy and Paste files from Illustrator CC to Fireworks?
What do "normal" AI prefs mean? AICB or PDF compliant? You might wanna try to turn off the latter....
Mylenium -
My win8 pc hard drive failed. After the hard drive was replaced, I copied iTunes Media backupfiles from external hard drive (Karen's Replicator backup software was used). ITunes does not recognize these back up files even though the location is the same as cloud & recently burned music that does show- help! The backup files consist of 34,000+ songs; almost all burned from my own CD collection. I do have most of the songs on an ipod classic but hesitate to try to restore from that. Can someone tell me how to get these 34,000 songs to show up in iTunes? Thanks!!
This diagram shows how a typical iTunes library ought to be set out (click on it to enlarge)
The red outline highlights the media folder and its contents, the various subfolders are only created if that kind of content is in your library. The right-hand side shows the files that should be found in the iTunes library folder; sentinel is normally hidden so may not be visible. The core of your iTunes library is the file iTunes Library.itl, you need to restore this, the other library files and the Album Artwork folder, as well as the media folder, to restore your library.
tt2 -
I Just synced my iPhone and lost all the info in notes I had on the phone. How do you have the info sync from phone to desktop and not the other way around as I usually make contact changes etc on my phone. I would then like to be able to sync that info from desktop to ipad thanks
It does make sense. The iPhone is a one-person device and just syncs to one computer.
The way it should work is as follows:
Old computer content ---> New computer
New computer <---> syncs to iPhone
But the way you are trying to operate sounds like:
Old computer content ---> iPhone
... and ...
New computer content <---> iPhone
So simply move your old stuff (either directly from iTunes, or from a computer backup) to the new computer, have it all there, then sync your iPhone to the new machine. -
How can I transfer photos from an IPhone 5 to an IPad 2 using a cable. I have tried using the lightning to firewire adapter with my current lead but this only seems to allow a download from the IPad to the IPhone and not the other way around.
The devices are not designed for transfer of that kind. Use Photo Stream as suggested by another poster, or transfer photos to your computer (a good idea anyway since they will be lost if your device needs to be reset), then use iTunes to sync them to the other devices.
-
TS2972 home sharing will work from computer to apple tv but not the other way?
home sharing will work from computer to apple tv but not the other way?
Home sharing is one thing, physically copying is another thing.
Maybe you are looking for
-
Hi All, I created a webdynpro development. In that all applications are working fine. One button i added and click of that it will download all the attachments corresponding to the sales order and it will place the attachments in desktop folder. I
-
I can't unlock my ipod nano 4th generation. The screen is still working, I can sync to my computer and I can see when it is charging but it stays in the mode of being locked even after I unlock it at the top. What could be wrong?
-
I have a lap top running leopard which has connected to virgin's wireless router (Net gear) My other computer is mac mini running Tiger. It initially connected to virgin wireless router. Suddenly it stopped connection to it. So no internet. Please le
-
NI Vision Builder vs. LabVIEW RT + NI Vision Assistant
Hello I'm designing a vision application which should be able to run stand-alone (EVS-1463RT). The app will have up to 30 inspection states (read gauge value, checking for the presence specific objects, etc.) approximately. The second requirements ar
-
Acrobat X Standard/Professional form features question
According to an announcement by RIM on April 2011: "The highly-anticipated BlackBerry PlayBook tablet will ship with Adobe Reader X for high-quality and fast viewing of rich content through the ubiquitous PDF. PlayBook users will have access to adv