I can no longer use all of the "Computer Management" tools against a remote computer. "Local Users and Groups", "Event Viewer", "Performance Logs and Alerts" and "Device Manager"
Hello All,
I can no longer use all of the "Computer Management" tools against a remote
computer. "Local Users and Groups", "Event Viewer", "Performance Logs and
Alerts" and "Device Manager"
kindly see the below snapshot for assistance
REGARDS DANISH DANIE
This link may help....
http://windowsxp.mvps.org/admintools.htm
Freeman
Similar Messages
-
Until the last month or so I have always been able to type the first few letters of a persons name in the email address bar and his address would be entered. Now this only happens for those people that I have contacted recently. The really big problem is my group that contains 40+ people. I use it only once a month and do not want to type 40+ addresses.
I think that may be a javascript issue.
In Firefox 23, as part of an effort to simplify the Firefox options set and protect users from unintentially damaging their Firefox, the option to disable JavaScript was removed from the Firefox Options window.
However, the option to disable JavaScript was not removed from Firefox entirely. You can still access it from about:config or by installing an add-on.
'''about:config'''
# In the address bar, type "about:config" (with no quotes), and press Enter.
# Click "I'll be careful, I promise"
# In the search bar, search for "javascript.enabled" (with no quotes).
# Right click the result named "javascript.enabled" and click "Toggle". JavaScript is now disabled.
To Re-enable JavaScript, repeat these steps.
'''Add-ons'''
You can alternatively install an add-on that lets you disable JavaScript, such as
*[https://addons.mozilla.org/firefox/addon/noscript/ No-Script] (to disable JavaScript on a per page basis, as required)
*[https://addons.mozilla.org/firefox/addon/quickjava/ QuickJava] (to easily disable and enable JavaScript, automatic loading of images, and other content)
*[https://addons.mozilla.org/firefox/addon/settingsanity/ SettingSanity] (adds back removed options for JavaScript, Advanced JavaScript Settings, loading images, and showing the Tab Bar)
Thank you and I hope this helps! -
I can no longer use keyboard shortcuts to access Zoom tool.
Hello,
Yesterday I wiped my HD and reinstalled my system.
I thought I put everything back the way I had it, but apparently I forgot something and can't figure out what's wrong.
When in Illustrator CS2, I try to hold down Space+Command, I don't get the zoom tool like I usually do. When I hold down Option to click and drag an item, it does not duplicate the item. Regular commands, Like Command+O and Command+N work fine.
I thought it might be the International Keyboard issue, where having 'US Extended' selected causes problems, but that is not the issue as it is turned off.
I'm using Tiger 10.4.11 on MacPro.
Anyone encounter this and have any suggestions?
Thanks.
-VincentIt can also be a language thing.
Switch language to US (if it's not your usual language), make your first keyboard command (f.ex. Cmd-Y) and then switch back to your normal language. Keyboard commands will keep working until next time you restart Illy. -
Can no longer use pages after upgrade, even after three restorations! Huge inconvenience!!
Can anyone help me with why I can no longer use pages after the latest upgrade to iOS 7.04. I have restored my ipad three times and it still won't work. It s ahuge inconvenience when all my documents are on pages. If you can get back to me as soon as possible that would be great!!
Turn off iCloud for Pages on your mobile device at Settings > Pages > Use iCloud > Off.
Open Pages on your computer and move any documents in iCloud to your desktop for safe keeping.
Navigate to system preferences > iCloud > Manage and check that Pages documents are not taking any space in the cloud, delete them if they are.
Enable iCloud syncing for Pages on your mobile device and launch the App.
If Pages now opens properly, start to add back documents from your desktop one at a time (or in small groups if you have many). -
Since the last AppleTV update I can no longer use home sharing. I have checked all IDs, re-booted iTunes, my router, and AppleTV, and checked the port settings in my firewall. nothing works. Is it me or did this last update really scew things up?
Hi,
I tried everythink, but same as before!
- droppings ot the main screen
- loosing Home Share
now even on iPads !
Frustrating!
I'm now more than convinced that this is caused by the latest iTunes version.
As some others stated in other threads .... it seems that Apple doesn't really take care of this problem. So what if, if we could make them feeling the same pain as we do. ... Just by dropping them a mail as soon as we have the problem again. Not more often, we don't want to be unfair, but everytime it happens.
I found this feedback site http://www.apple.com/feedback/itunesapp.html
I will start now with this.... maybe this will help to rise a little bit of attention
Tweety
This is the mailbody I always use
Hello all,
Since the last update to iTunes Version 10.6.1 (7) streaming content (Movies and TV shows) to Apple TVs and iPads has two major problems:
- Home Sharing is lost during streaming (streaming stops even if a large portion of the content is already preloaded)
- streaming stops and the main screen pops up (Home Sharing still available)
This happens sometime after some minutes, sometimes after several hours, but it surely happens.
I followed every advice I could found on this support website. There are now a lot of threads following this issue.
Sometimes it seems getting better, but hours later the same isues occured again. Watching content on this enviroment is a real pain and very frustrating.
As many others I'm now convinced that the latest update of iTunes caused this problem.
Our family enviroment contains the following Apple products:
- iTunes on a Win7 32 bit Noname PC (all content)
- second iTunes on a iMac with OS 10.6.8 (all content)
- third iTunes on a MacBook Pro with OS 10.6.8 (daughter, only selected content)
- fourth iTunes on a Win7 32 Samsung Notebook (son, only selected content)
- all iTunes sharing the same Home Sharing ID
- 2 Apple TV second generation
- 1 Apple TV first generation
- 2 iPod touch (bought last year)
- 2 iPads (second generation)
all firmware or software are on latest available patchlevel.
At this moment, I can not recomend to others to buy this products.
I will drop this feedback everytime my famiily and I facing this problem... just to help you to get a better feeling of the urgency of this issue.
Thanks for every effort in advanced. -
I have a large document which keeps repaginating and adding blank pages. I can no longer use the print preview at all. I have tried all the usual fixes. Nothing works. Can anyone help?
Is your printer selected? <br />
Is '''Print to File''' selected, where the web page is being printed to a file and not being sent to your printer?
See the screenshot below. -
the problem I have since I upgraded to Mavericks version 10.9.1
The problem appears only with Mail not with other programs, not even with my browser.
When I try to zoom the text of an e-mail I received or sent , I can no longer use the keys Command + to enlarge the text, although I can reduce it with Command -.
As I have a problem with my eyes, This is a serious matter for me.
When I write an e-mail, if I select text and press Command +, it just displaces the text to the right.
Now, my husband has a USB keyboard. If he connects it to my computer, his regular Command + does not work either, but he uses the extended keyboard, then it works. Unfortunately, he needs it for a musical application which does not work with a wireless keyboard.Firefox 3.6.4 and 3.6.6 use a process called, "plugin-container.exe" which was using up most of my CPU when I opened up multiple tabs that contained Adobe Flash files, and caused Firefox to lock up.
My solution was to use Firefox 3.5.10 which you can get from the Mozilla website at [http://www.mozilla.com/en-US/firefox/all-older.html]
I am using Adobe Flash 10.1.53.64 without any problem in this version of Firefox. Check the release notes, I believe it contains all the latest security fixes in "Firefox 3.6.4".
Hopefully, they will fix Firefox 3.6 in the next version (e.g. Firefox 3.6.7), until then you should probably use "Firefox 3.5.10". -
I updated my iphone 5 to ios 6.0.2. my wifi says its connected but doesn't work now. It doesn't matter what wifi network I connect to. It worked before updating my phone. I can no longer use facetime or use wifi at all. I'm not sure what to do to fix it.
I'm having similar issues with my phone. I got my first iPhone recently, only had an iPod touch gen4 for a little over a year. Updated to 6.0.2 when we got the phone (iPhone 5) a few days before Christmas. When I got home on the evening of January 11, my phone would not connect the router anymore. I was able to get it to connect after resetting the phone and the router, updating the router, and manually connecting. That laste for a few minutes and then wouldn't work anymore. I live in an area with very limited service, we have a network extender installed to help, and I am barely getting a 3G signal at times.
My wife's iPad 4, my touchiPod 4, and all of our laptops are working just fine on the router. When I dropped my kid off at school today, I noticed that I am not even seeing the school network anymore from the parking lot where before I got 3 or 4 bars and could connect to their wifi when I was there. Today my phone goes back and forth between seeing my home network but not connecting, to not even seeing the network at all even from the same room that the router is in.
Hope Apple fixes this problem soon.............. -
I am running Lion 10.7.5, Adobe Photoshop CS6, scanning slides on my Epson V600 and can no longer use the scan application or the plug in for Photoshop. Should I revert back to leopard in my time machine to finish scanning my family slides?
In 10.7 there is not a twain that works with Photoshop for importing with all the options needed to scan transparencies. I noticed that when I was scanning in October 2012 I was still using CS6 so somehow I was managing to be able to use all the scan features.
They sell 2nd party software (VieScan and Silverscript)which I found to be just mimially OK and very hard to use.
I just want to scan like I used to.
Can I use time machine to go back to an earlier operating sysytem LEOPARD, and then do my scans and then save the photos and them go back to the LION system?
I spent 7 hours trying crazy solutions - downloading Windows CS2 Photoshop and then using a program so I could run it on the apple. Then I couldn't figure out how to put a plug in for the scanner in the stupid windows Photoshop program. Googgling the computer like a mad woman trying to ask questions. I am not giving up...
Please help if you can...
Thanks...I assume you've tried using Image Capture. Give VueScan a try.
http://www.hamrick.com -
my mac book is not working so i can no longer use my mac to back up my note in my phone and unfortunately i dont have outlook on my pc is there a way to get all my old notes from my 3gs to my 4s iphone?
Reset, hold both home and power buttons until the iPhone begins to start, try this a few times if necessary. If still problem, you may have to just Restore your iPhone to get it working. In the future sync your iPhone with iTunes routinely and when it contains important data, iCloud when set correctly will do this for you continuously.
-
Dear Sir:
Two years ago I have purchased an Iphone 4 here in Carrefour Supermarket, Dubai UAE. The model number is MC319LL. Unfortunately last November 2011, I attempted to upgrade the OS to 5.0.1 but rightaway, my sim card(Etisalat UAE service provider) was blocked. As a result, I can no longer use the telephone function. I just found out recently that this model number .i.e.MC319LL is to be used for AT&T. My question is, how can I restore my unit to work as a celphone? And why is it that when I upgraded it, it was blocked. Was it illegal to sell this phone in the UAE market?
Thanks a lot.
Kathleen JewelYou purchased a "hacked" iPhone(hacked to unlock it) from a non-official source for iPhones. Unfortunately, that's the risk you take when you purchase from a non-official source. There is no way to get your phone officially unlocked, & all warranty & support has been voided. Sorry, but you don't have any good choices here. Your best bet is to go back to Carrefour Supermarket & get your money back, then purchase an iPhone from an official source. If they won't give you your money back, have them "fix" your phone...they will have to "hack" it again. Good luck.
-
TS1702 after upgrading to ios 6 i can no longer use the app store.
after upgrading to ios 6 i can no longer use the app store on my iPhone, i am unable to install new apps. i chose to fill out the security questions and the problem seems to occur since then. what could be a solution to get the app store working again??
i just contacted apple support and the solution is the following!!!!!
connect the iphone to your computer and open itunes
then click on itunes store at the left side of the screen
then click at the right top side of your itunes screen on your email address (or id that is displayed there in the black bar)
choose log out
then go to the top of the screen with the search option in itunes where you can search in the store and choose an app that you have not yet installed.
then you get the security questions also in itunes, fill the them out and after you have done that you are asked to log in again
now when you install an app that works (it is then on your computer still)
open the app store on your iphone and choose the updates button and install the app from the cloud
now when you install new apps also from the app store on your iphone it works again!!! and you are no longer asked about the security questions
(the other option they told me (that i did not have to use) is: go to settings/general/ all the way at the bottom of the screen choose make new settings restore networksettings and choose yes) -
Do I have to download Itunes again from the App Store after updating my original I can no longer use it.
Keep getting the error message Windows error 127, restore ITunes. This has not affected my IPad at all.
Hope someone can help.
thanks JeanHello Jean,
Based of what you have provided then I would say yes download iTunes from Apple’s website and also make sure that your version of Windows is up to date as well. Take a look at the article below to walk you through that plus some other steps necessary to get you back to using iTunes.
If you can't install or update iTunes for Windows
https://support.apple.com/en-us/HT201668
Regards,
-Norm G. -
After the upgrade to ios5, I can no longer use my iPad to make purchases on ticketmaster. Does anyone have a solution?
Apple changed MobileMe to iCloud and then restricted iCloud to 10.7 users only unfortunately
If your machine is a 64 bit processor Intel Mac you can upgrade to 10.7 for $29, however a lot of your 10.5/10.6/Rosetta based software could cease to function, especially third party hardware drivers for printers, fax machines, all-in-ones, scanners etc.
http://roaringapps.com/apps:table
Also depending how old the machine is, if it can accept 4GB of RAM (preferred), older video card, may not run 10.7 very well or stable.
My advice is to keep at 10.6.8, get a web based email service that's plaform/hardware neutral, forward your iPhone emails there. Gmail/Yahoo Mail for instance.
When your ready for new hardware and all new software, then buy a new machine.
If your going to go to 10.7 on your present hardware, I advise you clone 10.6.8 to a external drive first, that way you can c boot off the 10.6 disk erase the drive completely (necessary to remove hidden Lion Recovery Partition) and option boot off the 10.6.8 clone and reverse clone.
http://www.bombich.com/get_ready_for_lion.html -
Scanning in Mavericks? I can no longer use the scanning function in my HP Officejet 4500.
HP says to go through Preview, Image Capture, or Print/Scan in System Prefs.
Still doesn't work. Any ideas/similar experiences?Sure it is, yet it's called HP LaserJet Professional M1210nf MFP Series *
Today, I followed your other advice, and deleted the printer, deleted the /Library/Printer/hp folder, downloaded the entire set of driver, re-installed the printer twice, once with the driver, once with Bonjour.
The Bonjour Printer has the scan option active, but it is doesn't work (refer to above.), it is called M1217nfw
The Apple Driver Printer doesn't show the scan option at all, it is called M1217nf (as on the http://support.apple.com/kb/HT3669#HP list.) This model number doesn't exist, as far as I can tell.
Still, everything works perfectly in Snow Leopard, for a MF printer that has been manufactured years after Snow Leopard was released.
Why going up in software version means going backwards in compatiblity for brand new product is really the question that puzzles me here.
Maybe you are looking for
-
Remove Credit card from iTunes account
I'm trying to remove my credit card information for my itunes account. I go to Account Settings - Payment Information - Edit I see the credit card types but I do not see the "None" radio button that I've been reading about in discussions and forums.
-
Unable to create a tooltip for a line drawn on cartesiandatacanvas in flex
I am trying to draw a line on cartesiandatacanvas. While I am able to draw lines easily using the canvas.moveTo and canvas.lineTo methods, I cannot provide a tooltip to the line if I use that functionality. I have tried creating a label(when ever
-
Cannot view pdf files in safari
Whenever go to a website and try to open a pdf file in safari, I just get a grey screen. No buttons, no text, nothing. Totally non functioning. What's going on??
-
How can I get the autocorrection to work in my own language?
Hi! :-) After i installed Lion do i have problems with the textcorrection program in my own language. In Pages can i do a check in all languages but not my own, which is norwegian. In the inspector do i see all language but not norwegian. In addition
-
Purchasing and Advance Pricing
I need the following 1. Define a List Price for Supplier X item a (price 10) 2. Define a List Price for Supplier Y item a (price 20) Is there a some way that PO when I put the item in a Purchase Order detected the best price for the item? In other wa