I need a BAPI or function that can create a PO without the purchase req.

I need a BAPI or function that can create a PO without the reference to a purchase requisition. We are creating "direct POs" (with no reference to PR) manually. And we have a large amount of documents to create. I can't figure out if BAPI_PO_CREATE and BAPI_PO_CREATE1 can help us by doing this, because I've understood this BAPIs creates POs only with the reference to a purchase requisition.
Thanks in advance!!
Sebastian

Sorry I'm late guys, I couldn't replay your posts because I was busy.
Charlie,
...just because we have the data already in the SAP system.
My client doesn't want purchase requisitions to be created from the PM orders. Instead he asked us to create the purchase workflow by generating direct purchase orders from the PM orders, basically taking the information from the purchase agreement within the order's tasks. Maybe you don't understand a bit what I'm saying, but let me get this straight: we can't use LSMW because data doesn't come from a legacy.
Ian,
...after all, and like you've said, we're gonna use BAPI_PO_CREATE1 for creating the POs. Today I finally realized that, purchase requisitions aren't mandatory for the bapi to perform the process. If something goes wrong, I'll let you know.
Thanks anyway for your attention.
Sebastian

Similar Messages

  • Is there a BAPI or Function module can create a Customer Master record?

    Hi experts,
    In SE37, Is there a BAPI or Function module can create a Customer Master record?
    Regards

    BAPI_CUSTOMER_CREATEFROMDATA1
    also see this thread.
    Re: Create customer record  in SAP via BAPI
    кu03B1ятu03B9к

  • BAPI or Function Module to create Handling Unit at the delivery level

    Please send me the BAPI / FM details to create Handling Unit at the delivery level.
    Thanks

    Hi
    you can try below BAPI's.
    BAPI_HU_CREATE 
    BAPI_HU_PACK
    Hope this helps you.
    Rgds,
    Kris.

  • SSAS- DAX expression : Is there any DAX function that can return multiple values ?

    Hi,
    Iam in search of a DAX function that can return multiple values as result. please find below scenario where i want to implement the same.
    I have three  Tables: Table A (typeid, Cost, Qty ) ,Table B (typeid, Cost, Qty ) , Table C ( typeid,Typename ) .
    Table A                                       Table B                               
    Table C
    type id  cost  Qty             type id   Cost    Qty                 
    typeid  typename
    1           100    100                3         300     
    300                  1           aa
    2           200    200                4          400    
    400                  2           bb
                                                                                             3           cc
                                                                                             4          
    dd 
    i have to club cost and Qty of two tables(four measures)  as two measures in the  UI report. There are more columns in these tables that restrict the  UNION of the tables.(for the sake
    of understanding , i have not mentioned the othr columns). In the UI report(Execl 2013-power pivot) iam plotting these measures against the
    Table C.Typeid. Hence the measures drill down against each 
    Table C. Typeid as shown below:
    Typeid  Table A.cost  Table A.Qty  TableB.cost  TableB.Qty                              
    1              100             100
    2              200             200
    3                                                    
    300             300      
    4                                                    
    400             400
    My requirement is to club these measures so that the report will be as below
    Type id  cost   Qty
    1          100    100
    2          200    200
    3         300     300
    4         400      400
    Since i cannot club these in model,as a work around, i created a calculated measure in excel(Analyze tab->Calculations->olap tools->calculated measure) with the condition as below:
    new cost = IIF (ISEMPTY(TableA.cost)="TRUE",TableB.cost,TableA.cost)
    new Qty = IIF(ISEMPTY(TableA.Qty)="TRUE",TableB.Qty,TableA.Qty) and dragged these new measures into the report. It was working fine as expected.
    But  this functionality of Creating calculatedmeasure in excel report is possible only in 2013 excel version.
    Now the requirement is to get the same result in 2010 excel. Can you please help me in implementing the same in 2010 excel? or any other alternative method to bring the columns in model itself. I tried to create a measure in table A with DAX expression as
    : new cost :=CALCULATE(SUM(Table B.cost),ISBLANK(TableA.cost)) -> but this will return only 1 result .i need Sum(Table A.cost) also if it is not blank.
    Thanks in advance

    You can use SUMX ( 'Table A', 'Table A'[Cost] + 'Table B'[cost] )
    However, if you install the latest version of Power Pivot in Excel 2010, it supports the ISEMPTY function, too.
    http://support.microsoft.com/kb/2954099/en-us
    Marco Russo http://www.sqlbi.com http://www.powerpivotworkshop.com http://sqlblog.com/blogs/marco_russo

  • I have an ipod touch 4g. I want to use our internet hdtv as a monitor so others can see my screen in 40". Sony guy said that can do it wirelessly through the internet router instead of Hdmi without the need for an apple tv.Is this true and how do I do it?

    As I said above, I want to view my iPod screen on our new 40" Sony Internet full HD TV.
    I know that you can do this via HDMI but a Sony guy said that you should be able to do this wirelessly by going through the router. Is this true and can I do this without the need for the Apple TV?
    We are soon going to get the airport extreme, so will it work with that?

    1. Is it a smart TV?
    2. If so.... Is the TV connected to the Internet?
    3. If it is.... Check if your iPod and your TV share the same IP address (Wi-Fi network)
    4. If they do.... Then you should go to wherever your "Other Media" tab is.
    5. After that.... Search for you iPod. Because it is connected to the same network, it should recognize the device they same way AirPrint does.
    6. If you happen to see this fail, then try this method:
    1. Do you have a Bluetooth-enabled computer/laptop?
    2. If so.... Enable the bluetooth on the computer/laptop as well as your iPod.
    3. After that.... Your iPod should be actively searching and it should find the computer/laptop.
    4. If it did.... Transfer the file onto Windows/Mac (preferably Mac) and find the program to open the file.
    5. After doing so.... Connect your computer/laptop to the TV via HDMI Output Cable.
    6. Now it should work!

  • Need to know of a method / process that can be used to send the same msg to all those appearing in my email listings with the same extension after the "@" sign in their address(es) on my macbook [e.g., with "@gov.ca"; Snow Leopard].

    Need to know of a method / process that can be used to send the same msg to all those appearing in my email listings with the same extension after the "@" sign in their address(es) on my macbook [Snow Leopard].

    If you simply want to send the exact same message to everyone in your address book with emails ending in "@whatever.com", you can do the following:
    Create an email with subject, message and attachments but no addresses
    Open Address Book, All Contacts
    Search in Address Book for @whatever.com
    Select the results and drag them into the To: or Bcc: field of the email. If Bcc: then put your email address in the To: field.
    Send the email
    This will not personalize the emails (such as with "Dear firstname:" at the top of the message) but it will let you send an idential message to everyone who meets your criteria.

  • Error 136 Functions that can be compossed must declare a return type

    Hello,
    I have downloaded the EF Final Release driver and Im working with Oracle 11g express.
    I have the following Procedure:
    PROCEDURE ProductosPedido(
    Datos Out SYS_RefCursor) IS
    BEGIN
    OPEN Datos FOR
    SELECT Nombre,
    TO_NUMBER(Precio * (SELECT SUM(unidades)
    FROM DETALLES_PEDIDO
    WHERE PRODUCTO = PRODUCTO.ID)) Importe
    FROM PRODUCTO;
    END;
    And the following config section:
    <oracle.dataaccess.client>
    <settings>
    <add name="System.Productospedido.RefCursor.Datos" value="implicitRefCursor bindinfo='mode=Output'"/>
    <add name="System.Productospedido.RefCursorMetaData.Datos.Column.0" value="implicitRefCursor metadata='ColumnName=Nombre;BaseColumnName=Nombre;BaseSchemaName=System;BaseTableName=Producto;NativeDataType=nvarchar2;ProviderType=NVarchar2;DataType=System.String;ColumnSize=50;AllowDBNull=true;IsKey=false'" />
    <add name="System.Productospedido.RefCursorMetaData.Datos.Column.1" value="implicitRefCursor metadata='ColumnName=Importe;NativeDataType=number;ProviderType=Decimal;DataType=System.Decimal;AllowDBNull=false;IsKey=false;ColumnSize=8'" />
    </settings>
    </oracle.dataaccess.client>
    I have imported succesfully in my EF Model, but when I try to consume the Procedure it gives me Error 136 Functions that can be compossed must declare a return type
    Any solutions?
    Thanks and best regards!

    A stored procedure does not have a ReturnType, therefore IsComposable="false" and it cannot be used in LINQ queries.
    This limitation is imposed by EF and not by ODP.
    You may want to create a stored function which has a ReturnType ref cursor, and include this stored function into your model. Then, under the same namespace, you create a class with a "stub" method/function and use EdmFunction() to map this stub to the stored function. For example,
    class myFuncClass
    [EdmFunction("Model.Store", "MY_STORED_FUNC_1")]
    public static <your_complex_type_or_DbDataRecord> MyFunc_1(int? column1, ...)
    throw new NotSupportedException("Direct calls are not supported");
    You should be able to call myFuncClass.MyFunc_1(x) in your LINQ query. Your stored function MY_STORED_FUNC_1 will be called in the generated query.

  • Is ther a BAPI or RFC that can read any table ?

    I want to read 35 tables in SAP database. Is ther a BAPI or RFC that can read any table ?
    If I use RFC to read these tables, I will write a lot of codes. It may be a large work.

    Check these FM
    RFC_READ_TABLE
    RFC_GET_TABLE_ENTRIES

  • Need a BAPI or function module to do FMZ1 transaction for funds commitment.

    Hi,
        I need a BAPI or function module to do FMZ1 transaction, please advise.
    Regards
    Fellow ABAPer.

    I think I found it.
    If anyone is searching for it too, we will use these one:
    CO_ZA_AVAIL_CHK_ORDER_MULTI

  • Is there any BAPI that can create assignment in workforce planning (CMP2)

    Hello,
    I want to implement a batch input program in order to create assignment in workforce planning. But the screen is not actually proper for batch input. Is there any Bapi that can create assignment for a given network, Operation/Activity, suboperation/Subactivity, personel Number and work hours.
    Thanks in advance.

    Hi Aselsan,
    Please have a look into the below link
    [Link 1|Re: BAPI to create network (T-code CJ21)]
    [Link 2|Example code for BAPI_NETWORK_MAINTAIN]
    [Link 3|BAPI_NETWORK_COMP_ADD]
    Hope they are useful,
    Thanks
    kalyan

  • I need to do a file that can be edited by anyone after saved, there is any Indesign saving format that allow it?

    I need to do a file that can be edited by anyone after saved, there is any Indesign saving format that allow it?
    There is any way to let one page of the final pdf exported file editable?

    Hi there
    You haven't seen any replies because you posted this to the Captivate forums. Hang tight and I'll move it over to the InDesign forums where it may gain some traction.
    Best of luck in finding a solution! Rick

  • Bapi or function module to create a sales order in CRM 5.1 system

    Hi experts,
    Anyone knows any Bapi or function module to create a Sales order in CRM 5.1 system directly.
    Thanks.
    regards.
    Ruchi.

    hi ruchi,
    sory for the late respond, got a lot works to be done.
    based on my experience, you need several more information such as currency, uom for quantity, sales organization, etc.
    and honestly, i have never tried to create an order by just using 3 information ( sold to party, item, and quantity ),
    but i think it is possible because some of the information can be determined using configuration, but still some information is missing and the order that you create will have an error and you can't do next process of the order unless somebody fix / fill the information needed.
    just an idea, perhaps you need some z-tables to put your certain information needed for order creation and the information is maintained for each sold to party ( sold to party is a key of z-tables ) and each time order is created, all information will be query in this tables.
    and for this tables may be you can create an offline maintainance scenario using an adobe document. by this way, the sold to party can maintained all his/her/their information by them self.
    and by using this scenario, you can still maintain / create the order by programming ( perhaps using function module CRM_ORDER_MAINTAIN or else ).
    actually i want to implement in my company but don't have a chance becuase all has been set up and the management will think twice for implementing this scenario.
    hopes it hels
    cheers

  • Is there a way to either run a "Score" thing in Keynote, or a text box that can be typed in during the presentation?

    Is there a way to either run a "Score" thing in Keynote, or a text box that can be typed in during the presentation?

    Keynote does not have this function.
    The only way to do this is to use an annotation application. Google and find the cost and functionality you need, many have trial downloads.

  • System Image Restore Fails "No disk that can be used for recovering the system disk can be found"

    Greetings    
                                        - Our critical server image backup Fails on one
    server -
    Two 2008 R2 servers. Both do a nightly "Windows Server Backup" of Bare Metal Recovery, System State, C:, System Reserved partition, to another storage hard drive on the same machine as the source. Active Directory is on the C: The much larger D: data
    partition on each source hard drive is not included.
    Test recovery by disconnecting 500G System drive, booting from 2008R2 Install DVD, recovering to a new 500G SATA hard drive.
    Server A good.
    Server B fails. It finds the backed-up image, & then we can select the date we want. As soon as the image restore is beginning and the timeline appears, it bombs with "The system image restore failed. No disk that can be used for recovering the system
    disk can be found." There is a wordy Details message but none of it seems relevant (we are not using USB etc).
    At some point after this, in one (or two?) of the scenarios below, (I forget exactly where) we also got :
    "The system image restore failed. (0x80042403)"
    The destination drive is Not "Excluded".
    Used   diskpart clean   to remove volumes from destination drive. Recovery still errored.
    Tried a second restore-to drive, same make/model Seagate ST3500418AS, fails.
    Tried the earliest dated B image rather than the most recent, fail.
    The Server B backups show as "Success" each night.
    Copied image from B to the same storage drive on A where the A backup image is kept, and used the A hardware to attempt restore. Now only the latest backup date is available (as would occur normally if we had originally saved the backup to a network location).
    Restore still fails.         It looks like its to do with the image rather than with the hardware.
    Tried unticking "automatically check and update disk error info", still fail.
    Server A  SRP 100MB  C: 50.6GB on Seagate ST3500418AS 465.76GB  Microsoft driver 6.1.7600.16385   write cache off
    Server B  SRP 100MB  C: 102GB  on Seagate ST3500418AS 465.76GB  Microsoft driver 6.1.7600.16385   write cache off
    Restore-to hard drive is also Seagate ST3500418AS.
    http://social.answers.microsoft.com/Forums/en-US/w7repair/thread/e855ee43-186d-4200-a032-23d214d3d524      Some people report success after diskpart clean, but not us.
    http://social.technet.microsoft.com/Forums/en-US/windowsbackup/thread/31595afd-396f-4084-b5fc-f80b6f40dbeb
    "If your destination disk has a lower capacity than the source disk, you need to go into the disk manager and shrink each partition on the source disk before restoring."  Doesnt apply here.
    http://benchmarkreviews.com/index.php?option=com_content&task=view&id=439&Itemid=38&limit=1&limitstart=4
    for 0x80042403 says "The solution is really quite simple: the destination drive is of a lower capacity than the image's source drive." I cant see that here.
    Thank you so much.

    Hello,
    1. While recovering the OS to the new Hard disk, please don't keep the original boot disk attached to the System. There is a Disk signature for each hard disk. The signature will collide if the original boot disk signature is assigned to the new disk.
    You may attach the older disk after recovering the OS. If you want to recover data to the older disk then they should be attached as they were during backup.
    2. Make sure that the new boot disk is attached as the First Boot disk in hardware (IDE/SATA port 0/master) and is the first disk in boot order priority.
    3. In Windows Recovery Env (WinRE) check the Boot disk using: Cmd prompt -> Diskpart.exe -> Select Disk = System. This will show the disk where OS restore will be attempted. If the disk is different than the intended 2 TB disk then swap the disks in
    correct order in the hardware.
    4. Please make sure that the OS is always recovered to the System disk. (Due to an issue: BMR might recover the OS to some other disk if System disk is small in size. Here the OS won't boot. If you belive this is the case, then you should attach the
    bigger sized disk as System disk and/or exclude other disks from recovery). Disk exclusion is provided in System Image Restore/Complete PC Restore UI/cmdline. 
    5. Make sure that Number and Size of disks during restore match the backup config. Apart from boot volumes, some other volumes are also considered critical if there are services/roles installed on them. These disks will be marked critical for recovery and
    should be present with minimum size requirement.
    6. Some other requirements are discussed in following newsgroup threads:
    http://social.technet.microsoft.com/Forums/en-US/windowsbackup/thread/871a0216-fbaf-4a0c-83aa-1e02ae90dbe4
    http://social.technet.microsoft.com/Forums/en-US/windowsbackup/thread/9a082b90-bd7c-46f8-9eb3-9581f9d5efdd
    http://social.technet.microsoft.com/Forums/en-US/windowsbackup/thread/11d8c552-a841-49ac-ab2e-445e6f95e704
    Regards,
    Vikas Ranjan [MSFT]
    ------- This information is provided as-is without any warranties, implicit or explicit.-------

  • How can I deauthorize a computer that can no longer connect to the internet or is no longer working ?

    How can I deauthorize Itunes on a computer that can no longer connect to the internet or is no longer working ?

    You can't, which shouldn't be a problem unless you have 4 other computers authorized with the iTunes account and you need to authorize another.
    Once you have authorized 5 computers, you can de-authorize all computere from a computer that is currently authorized followed re-authorizing the current active computers that need to be authorized.

Maybe you are looking for