I tried to turn on my computer but nothing happened, I checked the battery and it had it all full. WHAT SHOULD I DO
As I tried to turn on my computer nothing happened. I checked the battery on the side and it said it was all 100 percent charged. I tried pressing the power button several times an dnothing happened no sound or image appeared. This is not the first time they fix it, last time that we went to the apple store they had to reset it and it was fine for a few weeks, until now that my computer is complety dead. what should I do
Take it back to the Apple Store
Allan
Similar Messages
-
My iPhone 4 died and I have tried charging it and plugging it into the computer, but nothing happens execpt the dead battery thing that pops up when you charge it when it's completely dead.
Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try another cable
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar -
I tried to restore my iphone 5s but it shut off during the restore and wont turn back on I tried reseting it with the home and power button but it doesnt work and I tried connecting it to itunes but it doesnt show up
Did you try to connect in recovery mode, as explained in this article?
If you can't update or restore your iOS device
If this does not work, get it checked by an Authorized Apple Service Provider or by Apple:
iPhone - Contact Support - Apple Support -
My itunes account doesn't list "devices" above the playlist, as the syncing instructions give. How can I sync the itunes I have purchased & downloaded to my computer, to my ipod shuffle? The device is plugged into my computer, but nothing happens. Shouldn't the computer recognize the device? It doesn't. Please help!
As a test, shut down your computer and disconnect ALL USB devices. Do this procedure to Reset the shuffle
http://support.apple.com/kb/HT1655
Start up computer with nothing connected, except for standard keyboard and mouse (if it's not a laptop). Run iTunes. Connect shuffle to a direct USB port on the computer. See if there's any improvement,
If the shuffle is now recognized, there may have been a USB device conflict previously, or maybe all of the devices connected at the same time overloads the USB bus (for power). An iPod charges its battery while connected, so it is a high-power USB device. -
I have tried to download Mavericks on my 2010 iMac(10.6.8), but nothing happens, not even the install app downloads, also I tried to download chrome, I moved it to the applications folder and when I opened the folder it wasn't there. I have a 1tb hard drive that is mostly empty. By the way I just got this imac used from a reseller.
Mavericks downloads into the Applications folder, where you can install it. Some Mac App Store Troubleshooting information and how to resume a download that was interrupted; some of the information here might get you an answer. Failing that, try contacting Apple Support.
-
Hello everyone my iPhone 5s sounds stop working.i did not do anything it just stop working when I tried to turn on my music player all the sounds is not working I already check the volume and it is not also muted :( what happened can anyone solve my problem please
Hey Kirby17,
Thanks for using Apple Support Communities.
If you are not getting any sound from the speaker, follow this article.
iPhone: No sound or distorted sound from speaker
http://support.apple.com/kb/ts5180
Ensure that there is nothing plugged in to the headset jack or the dock connector.
If the iPhone is in a protective case, make sure that the speaker port isn't blocked by the case.
Make sure that the speaker and dock port aren't clogged with debris. If necessary, clean it with a clean, small, dry, soft-bristled brush. Carefully and gently brush away any debris.
If an audio issue occurs when using a specific application, try testing other applications to see if the issue persists.
If the iPhone is paired with a Bluetooth headset or car kit:
Try turning off Bluetooth.
If you experience difficulties with the Bluetooth feature, follow these troubleshooting steps.
Restart the iPhone.
If restarting doesn't fix the issue, ensure that your iPhone is updated to the latest version of iOS.
If the issue is not resolved, please contact Apple Support.
Have a nice day,
Mario -
I have OS X 10.7.5 and am trying to download mavericks v 10.9.1 but nothing happens. I log in and download shows but nothing happens when I click it. Any help? Ta
Its a 5.3 GB file. It might takle a while to download.
When done, it may open automatically, but the file will be in your apps folder
Grant -
I have been using Adobe Photoshop since 1998. I recently replaced my computer and placed the Adobe Photoshop 5.0 CD in to install, and found that could not load the software, and referred me to Adobe. What should I do?
According to this forum post from the time of the shutdown, it is only those directly affected.
Activation server shut down for Creative Suite 2, Acrobat 7, and Macromedia products
Here is a list from that link
If your software is affected by the activation server shut down then you will receive an error that the Activation server is unavailable. The specific affected products are as follows:
Acrobat 7.0 - Windows
After Effects 7.0
Audition 3.0
Captivate 1.0
Contribute 2.0
Contribute 3.0
Creative Suite 2.0
Director MX 2004
Dreamweaver MX 2004
Fireworks MX 2004
Flash Paper 2.0
Freehand MX
GoLive CS2
GoLive 9.0
Illustrator CS2
InCopy CS2
InDesign CS2
Macromedia Studo MX 2004
Photoshop CS
Photoshop CS2
Photoshop Elements 4.0
Photoshop Elements 5.0
Premiere Pro 7.0
Production Studio Premium -
I want to get a new app for my ipad , but it first asked for apple ID and then asked for verify payment, what should i do?
The iTunes Store needs the 3-digit security code from your credit card on the account. The iPad will display the account information so you can enter this information. Once you enter the information, purchase the app and it will download. Sounds like the Apple ID and payment information is not yours (your parents), so discuss this with the account holder.
-
My ipod will not sync at all. I've restarted my Mac, and I also turned off my ipod and turned it on again to see if it recognizes my ipod and it still does not. What should I do?
Try plug it into a different USB port
Try here
http://www.apple.com/support/ipodtouch/assistant/itunes/ -
When I tried to update to OS6 on my iPad 2, it got as far as "Your iPad was updated successfully. There are just a few more steps to follow, and then you're done!" The Continue bar at the bottom turns blue momentarily, then back to white. Nothing happens. I powered off and back on, still nothing. When I use the "Home" button, it says "Setup incomplete" but won't continue. Any thoughts?
Try a Reset [Hold the Home and Sleep/Wake buttons down together for 10 seconds or so (until the Apple logo appears) and then release. The screen will go blank and then power ON again in the normal way.] It is app and data safe!
-
Ok, so I transferred some songs using my USB cable. Then, I checked my iPod, and it had spaces where there would be songs (ones that I had transferred from my laptop when I first got my iPod, so not bought from iTunes) but they were blank, so I completely turned off my iPod and turned it back on, that's when all of those songs disappeared, but they were still on my computer. Only the ones I had purchased iTunes on my iPod remained. I got some other songs to transfer after that, then it started saying "preparing to update files on iPod" "finishing updates" then it doesn't say anything and the songs still aren't on my iPod. Please explain and tell me if there is a way to fix it!
Maybe here:
iCloud: Troubleshooting creating backups -
I am trying to download trial for contribute but nothing happens
I am trying to download the trial for Contribute but nothing happens.
Hi,
What is the link for the page you are downloading the trial from?
Are you able to select the product platform and click on the download button?
Thanks -
Ok, new to this forum. I pad 2 FaceTime, new user.
Have list of favorites in the face time app, but when hit edit at top of list, red circles appear, but nothing happens when touch delete,
The delete red oval appears for fraction of second.
This has to be software issue???
ThxClick the Home button
Then double click the home button again
Hold your finger on the Phone App until it wiggles
Click the minus button
Reopen the App and try again -
I have the iPad 2. I was forwarding an email this morning, it froze up. I tried turning off the iPad and now I can't get it to turn back on? Any suggestions? The only thing that is on the black screen is a small circle of moving items.....
I'm glad it solved your problem
Maybe you are looking for
-
Hi All I am probably going to look stupid here but.... How do you use a UNC path in Safari? When I type in \\myserver\ looking for a local server Safari converts it to http://myserver/ which obviously gives me a totally different result. Just used to
-
Missing genius button and artwork bug
I just updated my iPhone and I noticed somethings that annoy me. Firstly, the Genius button that used to be in the middle of the bar when a song was playing is now nowhere to be found. Second, now when I add artwork manually to my albums the artwork
-
How to make the spark List in a mobile theme transparent ?
Hi, I have a List in a mobile project for which I want half of the List to be transparent. So what I did is set the "contentBackgroundAlpha" MXML value to 0 in teh <s:List> element, and in a custom ItemRenderer I set half of the List item to have a c
-
Solving Differential Equation - getting strange results.
Hi, i am using LabView to model the mathematic pendulum which comes down to solving the quation numericaly: where w is constant and 0 is an angle between the pendulum's cord and the vertical which i want to plot against time. I built this very simple
-
Grid value( Field J_3ASIZE ) in the report MB5T in SAP-AFS
Hi How can i bring the Grid value ( Field J_3ASIZE ) in the report MB5T for particular STO in SAP-AFS industry solution. I tried in the layout but there are no such fields to bring in !! Help me out swiftly. cheers Maruthi Edited by: MARUTHI RAM on A