I would like to know if there is such an app that allows my iPhone to act as a remote for my iPad ie if I'm recording something on my iPad I can use my iPhone to press record/play/pause/forward or rewind my iPad via my iPhone
I would like to know if there is such an app that allows my iPhone to act as a remote for my iPad ie if I'm recording something on my iPad I can use my iPhone to press record/play/pause/forward or rewind my iPad via my iPhone
As the King says, if your friends wifi router was relatively new, it likely has not been picked up by Apple's location based information database system and thus there is no location information associated with it. So your iPad had no way of getting its location.
The wifi location databases are traditionally updated by wardriving - literally companies employ people to drive around sniffing out active wifi signals and associating an approximate location to it. Some companies also have web sites to submit that information if owners wish to (Apple does not seem to have one though), and the various companies with wifi location databases buy and sell their information. Bottom line is though, it can take weeks, months or sometimes even longer for a residential router to get picked up - depends on where you live (more rural, likely the longer time it takes).
When I moved from VA to NC it took up to 6 months for mine to reflect my new location (I checked it once the week I moved in, and then periodically thereafter, and it finally was getting it right after about 6 months) and I live in a pretty densley populated area (triangle NC).
Similar Messages
-
I have a Macbook 2007/08 model and the charger has decided to pack in. I have also recently purchased a Macbook Pro 2013 model and would like to know if there is an adaptor available that I can use on my Macbook Pro charger to charge the Macbook.
You can get a new third party 60W power adapter on eBay for under $20.
http://www.ebay.com/sch/i.html?_nkw=macbook+power+adapter&_sacat=0&_sop=12&_dmpt =Apple_Laptops&_odkw=macbook+power+adapter&_osacat=111422&_trksid=p3286.c0.m270. l1313
Or for $80 from Apple http://store.apple.com/us/product/MC461LL/A -
I took some photos with my new 4s. Then, when I connected Iphone on PC asked if I wanted to start as a new phone or old. I choose my old account. I would like to know if there is any, any chance that I can recover the photos took before sync back.
I did not use ICloud or any storage and did not make any sync before.
Is there any Trash Can in Iphone in order to find them? I am dumb and I did not think about save them before connect to PC.Your photos are gone. They were wiped when you restored your phone. There is no "trash can".
You obviously don't understand how to use the iPhone properly. Attached is a link to the iPhone User guide. I suggest you read through it to avoid data loss in the future.
Best,
GDG
http://manuals.info.apple.com/en_US/iphone_user_guide.pdf -
I would like to know if there is any way to display an animated gif on an ipad
I would like to know, is there any way or app that allows you to display an animated gif on an iphone or ipad ? for example, just like when you go into your camera roll and it displays a picture, be able to display a moving picture ( animated gif)
You can use GifViewer Pro https://itunes.apple.com/us/app/gifviewer-pro-animated-gif/id629527680?mt=8
Cheers, Tom -
Hello, I have the dreamweaver 2014 cc build 6733 - I would like to know if there is a possibility to change it to hebrew - right to left writings,
as for now its writing the words in mirror when I paste hebrew.
BR
RoeyHi roeyre,
From what I know, CS6 had support for Right to Left languages. If you have a purchased version of Dreamweaver CC, you should be able to download CS6 from your CC application. See Dreamweaver Help | Arabic and Hebrew text for help with Right to Left text in DW.
Thanks,
Preran -
I would like to know is there anybody in the community that is not have a problem with the updates.
That is incorrect. Either you misread or the newspaper you read was wrong. iOS 6.1.2 fixes a bug that caused excessive activity and log entries with Exchange servers.
http://support.apple.com/kb/DL1639
The security breach was due to Java-based malware:
http://www.ft.com/cms/s/0/1fdebce6-7ac8-11e2-915b-00144feabdc0.html -
i downloaded ios5.1.1 to my phone, but i dont like the new software. The face detection used in the camera jut isnt for me. So, i would like to know if there was a way to undo the update and go back to ios 5.0.1. My iphone is not jailbroken or unlocked.
The face detection used in the camera jut isnt for me.
Try a different camera app. Camera Plus is a good one and there are many others. -
I use Preview to edit photos, and would like to know if there are any updates to this program in the works. It seems Apple is constantly updating its software, except for Preview. I find it crashes all too often, and also takes forever to "catch up" with me (as in spinning beachball of death) when I'm editing a lrge amount of photos. Yes, I know I should be using Photoshop or somesuch, but it's just too **** confusing, and I don't have the time to figure it out. Thanks!!
Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
Step 1
Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left. If you don't see that menu, select
View ▹ Show Log List
from the menu bar.
Enter the name of the crashed application or process in the Filter text field. Select the messages from the time of the last crash, if any. Copy them to the Clipboard (command-C). Paste into a reply to this message (command-V).
When posting a log extract, be selective. In most cases, a few dozen lines are more than enough.
Please do not indiscriminately dump thousands of lines from the log into this discussion.
Important: Some private information, such as your name, may appear in the log. Anonymize before posting.
Step 2
In the Console window, look under User Diagnostic Reports for crash reports related to the crashed process. The report name starts with the name of the process, and ends with ".crash". Select the most recent report and post the entire contents — again, the text, not a screenshot. In the interest of privacy, I suggest that, before posting, you edit out the “Anonymous UUID,” a long string of letters, numbers, and dashes in the header of the report, if it’s present (it may not be.) Please don’t post shutdownStall, spin, or hang logs — they're very long and not helpful. -
Hi, I would like to know if there is anything i can do to stop my emails from moving from the senders name, once i have forwarded it to some one else?
No there is nothing you can do to correct it. It is a hardware fault and only Apple can correct it by replacing parts in your Mac. More then likely the Logic board has failed. Specifically the GPU which is soldered to the Logic board so the complete logic board must be replaced.
-
I installed lv 6.1 on a windows 98 system. As I am having problems of stability (frequent crashes, much more than with the former release 6.0), I would like to know if there is some specific problem with windows 98 or there is some patch available.
My experience with Win98 is that it is not a very stable system, regardless of software used. For example, Win2000 and XP are far more stable than 98. I've had it crash on its own if I leave the computer on for several days.
I wouldn't recommend running programs for long time (few days) on this OS.
This being said, can you be more specific in your question. What kind of stability problems did you have, which VIs did you run (if possible post them here), did you change the interrupts and priority levels on those VI, do you get error messages or blue screen....
Zvezdana S. -
Hi I would like to know of there will be a new release with an iphone this fall along with iOS 8
We're users here, not Apple. Why do you think we'd know any more than you do? Not to mention, speculation about unnounced products is strictly forbidden by the Terms of Use of this forum.
-
I am conducting an investigation and I would like to know if there are cached websites on an iPad. I see under settings that I can clear the history, cookies and data. Can I view or pull that data off the device?
I am conducting an investigation and I would like to know if there are cached websites on an iPad. I see under settings that I can clear the history, cookies and data. Can I view or pull that data off the device?
-
I would like to know if there a way to use window (via bootcamp) and use a dual screen with the use of thunderbolt?
There are very specific requirements for using an iMac as an external display.
From Target Display Mode: Frequently Asked Questions (FAQ) - Apple Support
What are the requirements for TDM?
A Mac notebook or desktop with a Mini DisplayPort or Thunderbolt connection
A Thunderbolt or Mini DisplayPort cable
A supported iMac with OS X 10.6.1 or later. The table below shows iMac computers that support TDM, the required cables, and the port of the computer to which you are connecting the iMac.
iMac Model
Cable Supported
Port on Source Computer
iMac (27-inch Late 2009)
Mini DisplayPort to Mini DisplayPort
Mini DisplayPort or Thunderbolt
iMac (27-inch Mid 2010)
Mini DisplayPort to Mini DisplayPort
Mini DisplayPort or Thunderbolt
iMac (Mid 2011)
Thunderbolt to Thunderbolt
Thunderbolt
iMac (Mid 2012 and later)
Thunderbolt to Thunderbolt
Thunderbolt
Note that the iMac (Retina 5K, 27-inch, Late 2014) does not support Target Display Mode. -
HELLO, I HAVE THE SNOW LEOAPARD 10.6.8, I WOULD LIKE TO UPDATE THE LAST LION. I WOULD LIKE TO KNOW IF THERE ARE PROBLEMS WITH THE SOFTWARE COMPATIBILITY NOW, (EXAMPLES: LOGIC, REASON, SUITE ADOBE CS5 ...) THANK YOU!
Have a look here:
http://applehelpwriter.com/2011/07/24/will-my-old-apps-work-with-lion/
(Like any website owner, I may (or may not) derive compensation from my website) -
Hi, i would like to know is there any app that can let me see and edit microsoft excel
hi, i would like to know is there any app that can let me see and edit microsoft excel
Look at Documents to Go Premium Suite in the App Store. That app should be able to edit excel files.
http://itunes.apple.com/us/app/documents-to-go-premium-office/id317107309?mt=8
Maybe you are looking for
-
Javascript file - open BI Publisher report
Good afternoon. I'm not sure if this is even possible but hopefully one of you experts out there will be able to advise; I had some javascript in my page which contained a simple function to open a BI Publisher report, it was: function run_40BFG() po
-
Hi everyone, i have a question about HA Licensing... 1. I already have an installation of UCCX 7.0 Premium, with the needed Seats. 2. I'm buying ESW and UCSS to upgrade the software to an early version. 3. I'm buying another MCS 7816-I5 to have HA. 4
-
Hi, Can we restrict only what documents extension can be attached like if want to restrict to only .doc (word files)- is it possibile other than word documents no other documents (ppt,xls etc) should not allow to attach/upload to PO. Please suggest.
-
I'm using Firefox 5.0 on a desk top.
-
HELP! DVDSP won't let me burn dual layer in PTP. always forces to OTP
Everytime I try to burn a project on a dual layer (pioneer dual 111 drive) on my g5 running OS 10.4.5 with most recent version of DVDSP 4, it sticks me to OTP. I understand the difference between PTP and OTP and I build the project with PTP selected