Import using Data Manager

Hi everyone!
My client want to use the import package from Data Manager to upload his data.
I´m looking for a How to... than explain How to I can configure it.
Somebody can Help Me??
Thanks!!!

Hi,
I'm going to try this last one tomorrow.
Now I have this little problem: If my datafile have a header with a different order, I have a warning and reject the header line.
I introduced a mapping of the cols. My TransformationFile is like this but I have the same problem.
Some suggest??
*OPTIONS
FORMAT = DELIMITED
HEADER = YES
DELIMITER = TAB
SKIP = 0
SKIPIF =
VALIDATERECORDS=YES
CREDITPOSITIVE=YES
MAXREJECTCOUNT= -1
ROUNDAMOUNT=
*MAPPING
CATEGORY=*COL(1)
ACCOUNT=*COL(2)
CECO=*COL(3)
CLIENTES=*COL(4)
CURRENCY=*COL(5)
DATASRC=*COL(6)
ENTITY=*COL(7)
INTCO=*COL(8)
ORGVENTAS=*COL(9)
PRODUCTO=*COL(10)
TIME=*COL(11)
SIGNEDDATA=*COL(12)
*CONVERSION
Thanks!
Regards

Similar Messages

PDF - Importing through Data Manager -

I am performing following steps. In the data manager, I am trying to import the PDF file. Then link it to the Main Table.
While importing I am using "Link to Orginal File Only"
PDF file is present in the share folder and the path of share folder does not have spaces. I get the following error message
"There was an error opening this document. This file cannot be found".
Actually file is available as well as path is correct and also acees to the sahre folder.
I tried same thing through local drive from my desktop. I encounter the same message.
When, I go and see PDFs table in the repository, I can see a record inserted with the correct path. I am not able top open up the PDF using Object --> View PDF.
I am using MDM 7.1 SP 05.
Please share your experience.

Please let me know what version of MDM you are using... Can you give a try by uploading pdf from your local system.. This will make sure that there has nothing to do with the shared drive..
Please revert with the results.
Best Regards,
Shiv
Please also check this document, just to make sure you are not missing any step.
[How to Import Pdf Document in MDM|http://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/c01f54a2-99f1-2a10-5aa5-dcc50870e7f6]
Best Regards,
Shiv

Importing with DATA MANAGER

While directly importing with the help of data manager it gives me an error.
It doesnt import data from each and every field, it gives me two kins of error
1) some fields dont exist
2) another type of error is unable to find a lookup value.
And do suggest, even if Import manager exists when can i use this functionality.
regards
+
| Eleana West

First of all this Functionality can be used whenever u are sure that the data which has to be imported is free of any redundancies then only it is feasible to use this functionality.
Otherwise u need to use import mgr so that any kind of duplicates records can be eliminated.
And the errors which u are getting are
1) some fields dont exist
It gives bcoz from the source side the columns names do not match with the names on the destination side i.e.. the field names in the repository structure.
2) another type of error is unable to find a lookup value.
Even if the field names match and if the field on the destination side is a kind of lookup field i.e.. in turn its looking up in some other table then this kind of error arises.
u can bypass this error while importing thru data mgr by clicking on option button either skip value or skip record.
Hope dis clears ur doubt.
If any other queries feel free to ask
Regards Tejas..............

Select table when import using Data Pump API

Hi,
Sorry for the trivial question, I export the data using Data Pump API, with "TABLE" mode.
So all tables will be exported in one .dmp file.
My question is, then how to import few tables only using Data Pump API?, how to define "TABLES" property like command line interface?
should I use DATA_FILTER procedures?, if yes how to do that?
Really thanks in advance
Regards,
Kahlil

Hi,
You should be using metadata_filter procedure for the same.
eg:
dbms_datapump.metadata_filter
            (handle1
             ,'NAME_EXPR'
             ,'IN (''TABLE1'', '"TABLE2'')'
{code}
Regards
Anurag

Issues importing/"using" date/datetime in Julia. Is it even present?

I'm trying use the Date or DateTime in a script, which requires that I user "import Dates" or "using Dates". However, it can't find the module. I checked the the file list on the package info list and it doesn't seem to be present. Could someone confirm that this is the case?
[edit] I can confirm that I was doing everything correctly. I switch to julia-git in AUR, and its working fine after I added the path ( push!(LOAD_PATH,"/usr/share/julia/base") ). I'd still like it if someone could confirm that I'm not just looking in the wrong place.
Last edited by nstgc (2015-02-09 00:58:01)

Sorry for the late reply. No, this module is still not included in the installation as far as I can tell as of today. Do know that today I merely checked "/usr/share/julia/base", however last time I checked it was no where to be seen. I also tried "julia> import Dates".
Also /usr/share/julia/base is not in the load path.
julia> LOAD_PATH
2-element Array{Union(ASCIIString,UTF8String),1}:
"/usr/local/share/julia/site/v0.3"
"/usr/share/julia/site/v0.3"
I don't know if this is a bug or if this version just doesn't include this package.

Execute script logic using data manager

Hi all,
Could anyone explain me how to run a script logic using the data manager?
The only way I get it working is adding the script logic into the defaul.lgl file and running the default formulas package via data manager.
How can I run an specific script logic without using the default.lgf file?
Thanks and regards,
Ana

HI Ana,
You will have to create a SSIS package that will run the logic for you. A good example of this is the ICELIM package that comes standard with AppShell. The easiest is way for me is to copy the package and renaming it to what you want to call it in the following folder: C:\BPC\Data\Webfolders\<AppSet>\<Application>\DataManager\PackageFiles\System Files
You will then have to organize the package list and add the package and modify the advanced properties of the package and point it to the correct logic file. I always use the lgf file rather than the lgx file, but it is up to you.
Lemme know if you need more info.
Regards,
Andries

Data records rejected while using Data Manager Packages

Hello all ,
We have configured the dimensions and applications in SAP- BPC 7.5 NW. However , while loading the data into the application using a data manager package , all the records are rejected. The following is the error :
Line 3 :Dimension: P_CC member: SALESTEAM1 is invalid or is a calculated member
Line 3 :Dimension: PRODUCT member: PRODUCTA is invalid or is a calculated member
However , these member are present in the dimensions and are processed as well !! Any help is appreciated .
THanks
Vijay

The message seems to be saying you have a dimension forumula defined for those two cost centers. Please check your dimension members master data and make sure there is nothing defined in a property column called "Formula" for those two members. If there is something populated, then delete the cell contents and save and process your dimension. Then try your data manager load again.
Best regards,
[Jeffrey Holdeman|http://wiki.sdn.sap.com/wiki/display/profile/Jeffrey+Holdeman]
SAP Labs, LLC
BusinessObjects Division
Americas Applications Regional Implementation Group (RIG)

Unable import to some records using Data Manager

Wanted to import a file to BPC. The file I want to import like this.
ENTITY,CATEGORY,INTCO,DATASRC,RPTCURRENCY,TIME,ACCOUNT,AMOUNT
BP01,ACTUAL,NON_INTERCO,Input,LC,2008.AUG,ExtSales,240000
BP01,ACTUAL,NON_INTERCO,Input,LC,2008.AUG,3rdParty,80000
BP01,ACTUAL,NON_INTERCO,Input,LC,2008.AUG,RawMaterials,30000
BP01,ACTUAL,NON_INTERCO,Input,LC,2008.AUG,DirectLabor,12000
BP01,ACTUAL,NON_INTERCO,Input,LC,2008.AUG,OverheadCosts,14000
BP01,ACTUAL,NON_INTERCO,Input,LC,2008.AUG,SMEXP,2400
BP01,ACTUAL,NON_INTERCO,Input,LC,2008.AUG,GAEXP,1800
BP01,ACTUAL,NON_INTERCO,Input,LC,2008.AUG,Salaries.Cat1,5400
The entity BP01 is the parent and has subsidiaries BP02,BP03,BP04, BP05. The records of all the subsidiaries are accepted but records of parent entity BP01 are rejected. Is it because of the hierarchy? Please help on this.

In BPC, you may not LOAD any data or submit data to a PARENT level member. All data at the PARENTS is built by the aggregations occuring in the cube. If you have data at a Parent that is required in your design, I suggest adding another Child under the Parent with no children, but seperate name to accept the data. If the data is aggregated values from the Children, then don't include it in your extracts to be loaded, as it will be re-aggregated by the BPC application.
Hope this helps.

How to export resource manager consumer groups using Data Pump?

Hi, there,
Is there any way to export RM Consumer Groups/Mappings/Plans as part of a Data Pump export/import? I was wondering because I don't fancy doing it manually and I don't see the object in the database_export_objects view. I can create them manually, but was wondering whether there's an easier, less involved way of doing it?
Mark

Hi,
I have not tested it but i think a full db export/import (using data pump or traditional exp/imp) may help doing this (which might not be feasible for you to have full exp/imp) because full database mode exports/imports SYS schema objects also, so there is a chance that it will also import the resource group and resource plans.
Salman

Selection Set - Import Master data (prompt selection)

Hello Gurus,
When we run the package "Import Master data from NW infoobject" using data manager in BPC
we have options to select ,Infoobject ,write mode ,format ,transformation file and Dimension ,all of this we can use the answer prompt and provide the inputs using UJD_TEST_PACKAGE and automate it.
Now i want to also provide the inputs of "SET SELECTION" tab available on the package which are below ,so how to automate
Attribute ,Hierarchy ,Language ,Attribute List
in the prompt file in the UJD_TEST_PACKAGE
Thanks

Hi Peter,
You can trigger a BPC load from back end too. For that you need to create variants for the program UJD_TEST_PACKAGE or create a custom program depending on the requirement and then create variants( for example to load cost center master data, create a variant for 0COSTCENTER ) for it. The values for the variant{as already mentioned by Gersh} would be the text enclosed in square brackets after you run a Data Manager Package manually and then view details of the status.
Steps are:
1) Goto SE38
2) Enter the program UJD_TEST_PACKAGE or the custom package
3) Create a variant for the required master data/hierarchy load.
4) Enter the details of variant by using the details after you have manually run a data manager package.
You can test the package and include it in your pc's too.
Thanks,
Vinay
Edited by: Vinay Madhadi on Dec 16, 2011 5:01 PM
Edited by: Vinay Madhadi on Dec 16, 2011 6:18 PM

BPC 7.5 - Data Manager filling tablespace

We are installing a brand new BPC for NW 7.5 SP4 system. When trying to import data from .txt files via the data manager, the system is generating /1CPMB/DM0000xxx (example /1CPMB/DM0000001) tables. The problem is these tables are being generated with a size category of 9. This defaults to a next extent of 320MB. This is on an Oracle-based backend BI 701 system with Dictionary-based tablespace.
If you only upload 1-2 records, then it falls under the initial extent of 16KB. But if you upload enough records to get past that initial extent, then it will blow up and take up 320MB of space, most of it being wasted.
We've engaged SAP Support and thus far they have not been able to provide a means to have these tables generated with a lower size category, such as 1, or any other work-around to this issue.
Initially, we were trying to load 60-100 smaller datafiles. But seeing how BPC is dealing with them by wasting so much space, we are looking at combining the number of files to a smaller number. If not, you could theoretically try to take up 32TB of space.
We can reorg the tables after the fact, but that doesn't help the newly generated tables every time we upload a file using data manager.
1) Login to BPC for Netweaver website
2) Go into the excel portion
3) log into the applicationset
4) click on edata at the top of the screen
5) select upload data file
6) enter source and target locations. the file is a .txt file (40KB in
size)
7) click OK to start the
upload
*error*
Any thoughts?

Further digging, the tables are hardcoded by SAP code to default to a size category of 9...
class:
CL_UJF_FILE_SERVICE_MGR
METHOD upload_document_dm.
    TRY .
        lo_file_service_mgr->put_document_data_mgr(
                    EXPORTING i_docname     = lv_docname
                              i_append      = lv_append
                              i_doc_content = lt_content
                              i_content_delivery = im_is_cd ).
      CATCH cx_ujf_file_service_error INTO lo_exception.
        imess = convert_ex_to_message( lo_exception ).
        IF imess IS NOT INITIAL.
          READ TABLE imess INTO xmess INDEX 1.
          MESSAGE e001(00) WITH xmess-message.
        ENDIF.
    ENDTRY.
method:
PUT_DOCUMENT_DATA_MGR
If document is found, that means that there is probably
a database table already created,
CASE me->is_document_found( ).
    WHEN abap_true.
      lv_tabname = me->ds_document-doc_content_db.
    WHEN abap_false.
Check if this call is for content delivery, if so, then generate the table using
a different name space, otherwise use the default naming for data manager files.
      CASE i_content_delivery.
        WHEN abap_false.
          lv_tabname = do_file_service_dao->generate_doc_content_table( i_namespace = 'DM' ).
        WHEN abap_true.
          lv_tabname = do_file_service_dao->generate_doc_content_table( i_namespace = 'CD' ).
      ENDCASE.
ENDCASE.
method:
generate_doc_content_table
Add header and technical settings
CLEAR ls_dd02v.
ls_dd02v-tabname    = lv_tabname.
ls_dd02v-ddtext     = lv_ddtext.
ls_dd02v-ddlanguage = sy-langu.
ls_dd02v-tabclass   = 'TRANSP'.
ls_dd02v-contflag   = 'A'.
ls_dd02v-exclass    = '1'.
CLEAR ls_dd09v.
ls_dd09v-tabkat     = '9'.
ls_dd09v-tabart     = 'APPL1'.
ls_dd09v-pufferung = space.
ls_dd09v-bufallow   = space.

Importing relationship data

Hello,
Any one could explain me steps for importing relationship data, pre-requisites, source file structure.
I am very much confused about field mapping. It always give me error Failed to find the aggregation record from its field values.
Any one having document related to this plz send at
abhijeet.more_at_yahoo.co.in

Hi Mircea,
It worked fine for me when i import Relationship Data of Type Parent/Child either using Data Manager or using Import Manager.
But the Problem is that if i create relationship of Type Sibling say relationship name "Related_Item" then during Import using Import Manager this "Related_Item" relationship is not enabled when i select into Destination Table. So how to enable this as it is enabled for Parent/Child relationship during Import Manager.
So, i m able to import relationships of Type Parent/Child when created into relationship table of MDM Console. But Relationship of Type Sibling Created in MDM console is not imported using MDM Import Manager but sucessfully exported and imported Relationship of Type Sibling using MDM Data Manager.
So, Could you please check and tell how to import this Relationship of Type Sibling when created into Relationship table of MDM Console using MDM Import Manager.
Thanks,
Mandeep Saini

Data Manager in 9i or 10g

Hi dears.
I am using oracle 8.0.5. I always using Data Manager for import and export.
Now i have installed oralce 9i and 10g. in both of these version i could not found Data Manager.
Can some body help me how i import and export by 9i or 10g
thns

Can some body help me how i import and export by 9i or 10gFor 9i/10g -- [http://download.oracle.com/docs/cd/B19306_01/server.102/b14215/exp_imp.htm#i1023560]
For 10g and above --> [http://download.oracle.com/docs/cd/B19306_01/server.102/b14215/part_dp.htm]
Anand

Error in process chain when running package (data manager)

Hello experts,
I try to run the following how to : "move date between applications using Data Manager ..."
Yon can find the pdf here : http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/b0480970-894f-2d10-f9a5-d4b1160be203
I'm looking after someone who used it successfully, on my side after implementing all steps and running the package I get the message "IMMEDIATE RUN: Request to run the package on the server was successful The package is now running"
When I look the log for the process chain, overall status of the process chain is yellow, and steps "modify dynamically" and "clear BPC Tables" are in error.
I can't get any usefull error messages.
If someone has an idea to have details about those errors, it will be appreciated.
Points will be awarded, thanks in advance.
Guillaume P.

Hello Experts,
I am also facing the same issue with PC failing at Modify_Dynamically step....
This process type is working fine when used in standard delivered process chain to load transaction data.
I tried using this variant in my cutsom chain, but it fails.
Please suggest.....
Thx....D

Import Transaction Data - Duplicate records

Hi,
I need to upload a file of transaction data into BPC using data manager package. I've done the transformation and conversion files which validate successfully on a small data set. When I try to upload the data file using the real life file, it fails due to duplicate records. This happens because multiple external ID's map to one internal ID. Therefore, whilst there are no duplicates in the actual file produced by the client, the resulting data produced after conversion does contain duplicates and will therefore not upload.
Apart from asking the client to perform the aggregation before sending me the file, is there any way to get BPC to allow the duplicates and simply sum up?
Regards
Sue

Hi,
Try adding the delivered package /CPMP/APPEND and run it. This should solve your problem.
Thanks,
Sreeni

Import using Data Manager

Similar Messages

Maybe you are looking for