Important CRM TABLES

Hi,
Can anybody send me the list of mostly used CRM tables for crm transactions preferably for Service module
Dose it have a model anywhere that list all of these tables and their relationships.
My email id is [email protected]
Thanks
Naresh
Message was edited by:
Naresh T D S R

Some of them as I got in some posts are
Some important tables in CRM :
BUT000 : BP: General data
Contains Business Partner Number, Partner Category, Partner Type, First Name, Last Name etc.
BUT020 BP: Addresses
BUT050 BP relationships/role definitions: General data
Contains Relationship, Partner Number (PARTNER1), Relationship Category
BUT051 BP Relationship: Contact Person Relationship
Similar to BUT050 , additionally contains Contact Persons Address data
BUT0BK Business Partner: Bank Data & Details
BP Number, Bank Key, Bank Country Key, Bank Account Number
BNKA Bank Master Data
BUT100 BP: Roles
ADR2 Telephone Numbers (Business Address Services)
ADR6 SMTP Numbers (Business Address Services)
Contains Email Id of the BP.
ADRC Addresses (Business Address Services)
BPs Complete Address Details- City, Country, Post Code, District, Street, Title No Etc
TSAD3T Table containing the Title text against a Title No.
COMM_PRODUCT Master Table for Product
CRMM_BUAG Master table for Business Agreement
CRMM_BUAG_H Header Data for Business Agreement such as Tax Category, Tax Characteristic, Form key, Business Agreement Class. Data in this table correspond to ISU CRMD_ORDERADM_H Contains the Header Information for a Business Transaction.
Note:
1. It doesnt store the Business Partner
responsible for the transaction. To
get the Partner No, link it with
CRM_ORDER_INDEX.
2. This table can be used for search
based on the Object Id(Business
Transaction No).
CRMD_CUSTOMER_H Additional Site Details at the Header Level of a Business Transaction
CRMC_PROC_TYPE Master table Business Transaction Type
CRMC_PARTNER_FCT Definition of Partner Functions
SCPRIOT Priorities for Activities with priority text.
CRMC_PROC_TYPE_T Text for a transaction type
CRMC_ACT_OBJ_T Objective Number and Text for Activities
TJ30T All the status code and text
CRMC_PR_ASSIGN : Transaction Type and its Transaction Type Object.
IBIB : Installed Base/Ibase
IBIN : Installed Base Components

Similar Messages

Diagram of CRM table relationship

Hi,
can you please provide any diagram of CRM table relationship ?
Thanks
Tapendu

Some of the important CRM tables. Hope this helps
Business Partner
BUT000
BUT020
BUT050
BUT051
BUT0BK
BNKA
BUT100
ADR2
ADR6
ADRC
TSAD3T
COMM_PRODUCT
CRMM_BUAG
CRMM_BUAG_H
CRMM_BABR_H
Business Transaction
CRMD_ORDERADM_H
CRMD_CUSTOMER_H
CRMC_PROC_TYPE
CRMC_PARTNER_FCT
SCPRIOT
CRMC_PROC_TYPE_T
CRMC_ACT_OBJ_T
TJ30T
CRMC_PR_ASSIGN
CRMD_LINK
CRMD_ORDER_INDEX
CRMD_ORDERADM_I
CRMD_CUSTOMER_I
SCAPPTSEG
CRM_JEST
CRM_JCDS

CRM Table Names

Hello Experts
Which CRM tables should I look to find out the product, plant and the business partner that was used, if I have the CRM transaction number. How are these tables linked to get the required information? If I require this info to be extracted to BW, what additional information is required for the BW resource?
Thanks in advance.

Hi know.how!
CRM_ORDER_READ is a function module which can be used to get the details of any business transaction based on the Header GUID, Item GUID or both.
Some Exporting Parameters in CRM_ORDER_READ Function Module
Return Structure Name Details Fetched
ET_ORDERADM_H Header Details of a Business Transaction such as OBJECT_ID, PROCESS_TYPE etc.
ET_ORDERADM_I Item Details of a Business Transaction such as PRODUCT, PRODUCT_KIND, HEADER etc.
ET_ACTIVITY_H Header Details of an activity such as PRIORITY, OBJECTIVE, Address Details etc.
ET_ACTIVITY_I Item Details of an activity.
ET_CUSTOMER_H Additional details at Header level
ET_CUSTOMER_I Additional details at Item level
ET_APPOINTMENT All the dates at Header and Item level
ET_PARTNER Partner Details at Header and Item level
ET_STATUS Status of Business Transaction at Header and Item level
ET_BILLING Billing related details for a Business Transaction both at Header and Item (This structure was enhanced in a leading ISU SAP-CRM implementation to include BUAG_ID(Business Agreement) field in a Service Contract
ET_ORDPRP_OBJL_I_D Object List details such as PRODUCT
ET_DOC_FLOW Ref. Details of the previous Business Transaction
Ex:
    CALL FUNCTION 'CRM_ORDER_READ'
      EXPORTING
        IT_HEADER_GUID                = lt_header_guid
      IMPORTING
        ET_ORDERADM_H               = lt_orderadm_h
        ET_ORDERADM_I                 = lt_orderadm_i
Best regards, Kostya

Does anyone have a SAP CRM Table Relations Diagram? !!

Hello,
For R/3 I have a document containing the relation between the most important database tables. Does anyone have a similar document for SAP CRM? (5.0).
Since I'm new to SAP CRM I would really appreciate if someone could send such a document to me at <removed by SDN Forum Moderator>
(To vikash krishna: I never received the document so I try by posting again...)
Thanks,
Jeroen

Hi,
https://websmp208.sap-ag.de/solutions
In this navigate through, Business solutions and applications -> MySAP Business Suite -> MySAP CRM -> solution library -> CRM powered by Netweaver -> Process Integration -> Business objects.
There you will find table relationships.
Hope this helps.
Regards,
Karthik.

Regarding Exporting and Importing internal table

Hello Experts,
I have two programs:
1) Main program: It create batch jobs through open_job,submit and close job.Giving sub program as SUBMIT.
I am using Export IT to memory id 'MID' to export internal table data to sap memory in the subprogram.
The data will be processed in the subprogram and exporting data to sap memory.I need this data in the main program(And using import to get the data,but it is not working).
Importing IT1 from memory id 'MID' to import the table data in the main program after completing the job(SUBMIT SUBPROGRAM AND RETURN).
Importing is not getting data to internal table.
Can you please suggest something to solve this issue.
Thank you.
Regards,
Anand.

Hi,
This is the code i am using.
DO g_f_packets TIMES.
* Start Immediately
       IF NOT p_imm IS INITIAL .
         g_flg_start = 'X'.
       ENDIF.
       g_f_jobname = 'KZDO_INHERIT'.
       g_f_jobno = g_f_jobno + '001'.
       CONCATENATE g_f_jobname g_f_strtdate g_f_jobno INTO g_f_jobname
                                              SEPARATED BY '_'.
       CONDENSE g_f_jobname NO-GAPS.
       p_psize1 = p_psize1 + p_psize.
       p_psize2 = p_psize1 - p_psize + 1.
       IF p_psize2 IS INITIAL.
         p_psize2 = 1.
       ENDIF.
       g_f_spname = 'MID'.
       g_f_spid = g_f_spid + '001'.
       CONDENSE g_f_spid NO-GAPS.
       CONCATENATE g_f_spname g_f_spid INTO g_f_spname.
       CONDENSE g_f_spname NO-GAPS.
* ... (1) Job creating...
       CALL FUNCTION 'JOB_OPEN'
         EXPORTING
           jobname          = g_f_jobname
         IMPORTING
           jobcount         = g_f_jobcount
         EXCEPTIONS
           cant_create_job = 1
           invalid_job_data = 2
           jobname_missing = 3
           OTHERS           = 4.
       IF sy-subrc <> 0.
         MESSAGE e469(9j) WITH g_f_jobname.
       ENDIF.
* (2)Report start under job name
       SUBMIT (g_c_prog_kzdo)
              WITH p_lgreg EQ p_lgreg
              WITH s_grvsy IN s_grvsy
              WITH s_prvsy IN s_prvsy
              WITH s_prdat IN s_prdat
              WITH s_datab IN s_datab
              WITH p1      EQ p1
              WITH p3      EQ p3
              WITH p4      EQ p4
              WITH p_mailid EQ g_f_mailid
              WITH p_psize EQ p_psize
              WITH p_psize1 EQ p_psize1
              WITH p_psize2 EQ p_psize2
              WITH spid     EQ g_f_spid
              TO SAP-SPOOL WITHOUT SPOOL DYNPRO
              VIA JOB g_f_jobname NUMBER g_f_jobcount AND RETURN.
*(3)Job closed when starts Immediately
       IF NOT p_imm IS INITIAL.
         IF sy-index LE g_f_nojob.
           CALL FUNCTION 'JOB_CLOSE'
             EXPORTING
               jobcount             = g_f_jobcount
               jobname              = g_f_jobname
               strtimmed            = g_flg_start
             EXCEPTIONS
               cant_start_immediate = 1
               invalid_startdate    = 2
               jobname_missing      = 3
               job_close_failed     = 4
               job_nosteps          = 5
               job_notex            = 6
               lock_failed          = 7
               OTHERS               = 8.
           gs_jobsts-jobcount = g_f_jobcount.
           gs_jobsts-jobname = g_f_jobname.
           gs_jobsts-spname   = g_f_spname.
           APPEND gs_jobsts to gt_jobsts.
         ELSEIF sy-index GT g_f_nojob.
           CLEAR g_f_flg.
           DO.                         " Wiating untill any job completion
             LOOP AT gt_jobsts into gs_jobsts.
               CLEAR g_f_status.
               CALL FUNCTION 'BP_JOB_STATUS_GET'
                 EXPORTING
                   JOBCOUNT                         = gs_jobsts-jobcount
                   JOBNAME                          = gs_jobsts-jobname
                IMPORTING
                   STATUS                           = g_f_status
*            HAS_CHILD                        =
*          EXCEPTIONS
*            JOB_DOESNT_EXIST                 = 1
*            UNKNOWN_ERROR                    = 2
*            PARENT_CHILD_INCONSISTENCY       = 3
*            OTHERS                           = 4
               g_f_mid = gs_jobsts-spname.
               IF g_f_status = 'F'.
                 IMPORT gt_final FROM MEMORY ID g_f_mid .
                 FREE MEMORY ID gs_jobsts-spname.
                 APPEND LINES OF gt_final to gt_final1.
                 REFRESH gt_prlist.
                 CALL FUNCTION 'JOB_CLOSE'
                   EXPORTING
                     jobcount             = g_f_jobcount
                     jobname              = g_f_jobname
                     strtimmed            = g_flg_start
                   EXCEPTIONS
                     cant_start_immediate = 1
                     invalid_startdate    = 2
                     jobname_missing      = 3
                     job_close_failed     = 4
                     job_nosteps          = 5
                     job_notex            = 6
                     lock_failed          = 7
                     OTHERS               = 8.
                 IF sy-subrc = 0.
                   g_f_flg = 'X'.
                   gs_jobsts1-jobcount = g_f_jobcount.
                   gs_jobsts1-jobname = g_f_jobname.
                   gs_jobsts1-spname   = g_f_spname.
                   APPEND gs_jobsts1 TO gt_jobsts.
                   DELETE TABLE gt_jobsts FROM gs_jobsts.
                   EXIT.
                 ENDIF.
               ENDIF.
             ENDLOOP.
             IF g_f_flg = 'X'.
               CLEAR g_f_flg.
               EXIT.
             ENDIF.
           ENDDO.
         ENDIF.
       ENDIF.
       IF sy-subrc <> 0.
         MESSAGE e539(scpr) WITH g_f_jobname.
       ENDIF.
       COMMIT WORK .
     ENDDO.

Getting error while importing a table partition

Hi,
I am trying to import a table partition from OEM and occurred with following error:
Job IMPORT000042 has been reopened at Friday, 13 June, 2008 14:44
Restarting "SYSMAN"."IMPORT000042":
Processing object type TABLE_EXPORT/TABLE/TBL_TABLE_DATA/TABLE/TABLE_DATA
ORA-31693: Table data object "SCOTT"."CONTAINER":"PARTITION_5" failed to load/unload and is being skipped due to error:
ORA-06502: PL/SQL: numeric or value error
LPX-00210: expected '<' instead of 'n'
Job "SYSMAN"."IMPORT000042" completed with 1 error(s) at 14:44
Job state: COMPLETED
Thanks

What's the source and target database Oracle version?
What's the character set of both databases?

Error while Importing a Table in To Target Module

Hi All,
Iam getting follwong error msg while importing a table in OWB Target Module.
API4806: Object description is not allowed to be translated before object business name. Please give a translation to the business name first.
why I am getting this error ?
Rajesh

Guys,
I am able to solve the problem. I think the problem is Language settings difference between Database and OWB repository.

How to import external table, which exist in export dump file.

My export dump file has one external table. While i stated importing into my developement instance , I am getting the error "ORA-00911: invalid character".
The original definition of the extenal table is as given below
CREATE TABLE EXT_TABLE_EV02_PRICEMARTDATA
EGORDERNUMBER VARCHAR2(255 BYTE),
EGINVOICENUMBER VARCHAR2(255 BYTE),
EGLINEITEMNUMBER VARCHAR2(255 BYTE),
EGUID VARCHAR2(255 BYTE),
EGBRAND VARCHAR2(255 BYTE),
EGPRODUCTLINE VARCHAR2(255 BYTE),
EGPRODUCTGROUP VARCHAR2(255 BYTE),
EGPRODUCTSUBGROUP VARCHAR2(255 BYTE),
EGMARKETCLASS VARCHAR2(255 BYTE),
EGSKU VARCHAR2(255 BYTE),
EGDISCOUNTGROUP VARCHAR2(255 BYTE),
EGREGION VARCHAR2(255 BYTE),
EGAREA VARCHAR2(255 BYTE),
EGSALESREP VARCHAR2(255 BYTE),
EGDISTRIBUTORCODE VARCHAR2(255 BYTE),
EGDISTRIBUTOR VARCHAR2(255 BYTE),
EGECMTIER VARCHAR2(255 BYTE),
EGECM VARCHAR2(255 BYTE),
EGSOLATIER VARCHAR2(255 BYTE),
EGSOLA VARCHAR2(255 BYTE),
EGTRANSACTIONTYPE VARCHAR2(255 BYTE),
EGQUOTENUMBER VARCHAR2(255 BYTE),
EGACCOUNTTYPE VARCHAR2(255 BYTE),
EGFINANCIALENTITY VARCHAR2(255 BYTE),
C25 VARCHAR2(255 BYTE),
EGFINANCIALENTITYCODE VARCHAR2(255 BYTE),
C27 VARCHAR2(255 BYTE),
EGBUYINGGROUP VARCHAR2(255 BYTE),
QTY NUMBER,
EGTRXDATE DATE,
EGLISTPRICE NUMBER,
EGUOM NUMBER,
EGUNITLISTPRICE NUMBER,
EGMULTIPLIER NUMBER,
EGUNITDISCOUNT NUMBER,
EGCUSTOMERNETPRICE NUMBER,
EGFREIGHTOUTBOUNDCHARGES NUMBER,
EGMINIMUMORDERCHARGES NUMBER,
EGRESTOCKINGCHARGES NUMBER,
EGINVOICEPRICE NUMBER,
EGCOMMISSIONS NUMBER,
EGCASHDISCOUNTS NUMBER,
EGBUYINGGROUPREBATES NUMBER,
EGINCENTIVEREBATES NUMBER,
EGRETURNS NUMBER,
EGOTHERCREDITS NUMBER,
EGCOOP NUMBER,
EGPOCKETPRICE NUMBER,
EGFREIGHTCOSTS NUMBER,
EGJOURNALBILLINGCOSTS NUMBER,
EGMINIMUMORDERCOSTS NUMBER,
EGORDERENTRYCOSTS NUMBER,
EGRESTOCKINGCOSTSWAREHOUSE NUMBER,
EGRETURNSCOSTADMIN NUMBER,
EGMATERIALCOSTS NUMBER,
EGLABORCOSTS NUMBER,
EGOVERHEADCOSTS NUMBER,
EGPRICEADMINISTRATIONCOSTS NUMBER,
EGSHORTPAYMENTCOSTS NUMBER,
EGTERMCOSTS NUMBER,
EGPOCKETMARGIN NUMBER,
EGPOCKETMARGINGP NUMBER,
EGWEIGHTEDAVEMULTIPLIER NUMBER
ORGANIZATION EXTERNAL
( TYPE ORACLE_LOADER
DEFAULT DIRECTORY EV02_PRICEMARTDATA_CSV_CON
ACCESS PARAMETERS
LOCATION (EV02_PRICEMARTDATA_CSV_CON:'VPA.csv')
REJECT LIMIT UNLIMITED
NOPARALLEL
NOMONITORING;
While importing , when i seen the log file , it is failing the create the external table. Getting the error "ORA-00911: invalid character".
Can some one suggest how to import external tables
Addressing this issue will be highly appriciated.
Naveen

Hi Srinath,
When i observed the create table syntax of external table from import dump log file, it show few lines as below. I could not understand these special characters. And create table definationis failing with special character viz ORA-00911: invalid character
ACCESS PARAMETERS
LOCATION (EV02_PRICEMARTDATA_CSV_CON:'VPA.csv').
I even observed the create table DDL from TOAD. It is same as i mentioned earlier
Naveen

Can I use Power Query to Import a table from Excel sheet range which starts not from the top row?

Hi,
Being an experienced Excel user before Power BI, I am just starting to explore the M and Power Query capabilities, and need help already (ain't easy to google this use case somehow):
I need to import the table which sits in the Excel file with header row in the row 17 of Excel sheet, with some metadata header in the preceding rows of the columns A and B.
01: Report name, Quick Report
02: Report Date, 1/1/2014
17: Employee Name, Manager, etc...
18: John Doe, Matt Beaver, etc.
Both (a) direct attempt to load as Excel file and (b) the indirect way through [From Folder] and formula in custom column -- both lead to the same error: "[DataFormat.Error] External table is not in the expected format."
Specifically, I tried to use the [Power Query -> From File -> From Folder] functionality, select an Excel file and add a custom column to access the binary content: [Add Custom Column] with formula "=Excel.Workbook([Content])".
It looks like Power Query expects a rectangular range with headers full-width followed by a contiguous table range to import anything, and refuses to load if that is not the case...
QUESTION: Is there any way to load whatever-formatted data from Excel first, and then manipulate the overall imported range (like referring to rows starting from 17th using "Table.SelectRows" etc.) to read the actual data? Reading and using
the metadata from header would be a bonus, but that comes second... The main issue is to get something from a non-regular Excel file to later work with using M formulae ...
Thanks!
SAM

Finally found the answer to this one in ():
You Cannot Open a Password-Protected Workbook
If the Excel workbook is protected by a password, you
cannot open it for data access, even by supplying the correct password with
your connection settings, unless the workbook file is already open in the
Microsoft Excel application. If you try, you receive the following error
message:
Could not decrypt file.
ANSWER: So, will have either weave in the work with temporary unprotected files or requires opening them before updating the data source (although this almost defeats the purpose of automation...)
ANSWER to ORIGINAL QUESTION: password was preventing Power Query from reading the Excel file. For solution see above.
Thanks anyway for participation and inspiration, Imke!

CRM Table for finding Partner Function for a Sales Order

Hello everyone,
I am trying to retrieve Ship-to-Party Customer Number for a particular Transaction (Sales Order) from a SAP CRM table.
In SAP SD we have a table VBPA for the same.
I would like to retrieve the same either from a single table if available or multiple linked tables in SAP CRM.
I tried to link CRMD_ORDERADM_H & CRDM_PARTNER to retrieve the data .. But it dint work.
I am new to CRM .. so Gurus, please share ur insight.
Thanks
Vin

Hi,
Select GUID_SET in table CRMD_LINK where GUID_HI = CRMD_ORDERAMD_H-GUID.
Use the GUID_SET to select data in table CRMD_PARTNER.
Best regards,
Caíque Escaler

Importing internal table in Adobe Interactive Forms

Hi all,
at the moment I do my first steps in AIF.
I have created a report and select dd02l, dd03l and dd04l.
dd02l is a structure. dd03l and dd04l are internal tables.
How can I import internal tables into my function module with getting a runtime error? Fields and structures are no problem?
I have defined both internal tables as importing parameter in my form interface because I cannot define internal tables ;o(
Thx 4 help & regards
Michael

hi,
find attached document it will helpful for u go to link
1.https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/c2567f2b-0b01-0010-b7b5-977cbf80665d
2.https://www.sdn.sap.com/irj/sdn/abap-elearning
thanks reward if helpful

Importing internal table from one program to another program

Hi everybody,
i have one small doubt.
i am using submit statement and passing the values from this program to another program selection screen. in that program logic is written.In that program one internal table values are being exported to the memory id of that program. now i have to import that internal table values into my program by using import statement. i am using the following syntax
import itab from menory id 'program name'.
but i am getting an error saying program name is unknown.
what is the exat syntax for this .
thanking you,
giri.

hi,
check these statements.
IMPORT - Get data
Variants:
1. IMPORT obj1 ... objn FROM DATA BUFFER f.
2. IMPORT obj1 ... objn FROM INTERNAL TABLE itab.
2. IMPORT obj1 ... objn FROM MEMORY.
3. IMPORT obj1 ... objn FROM SHARED MEMORY itab(ar) ID key.
4. IMPORT obj1 ... objn FROM SHARED BUFFER itab(ar) ID key.
5. IMPORT obj1 ... objn FROM DATABASE dbtab(ar) ID key.
6. IMPORT obj1 ... objn FROM DATASET dsn(ar) ID key.
7. IMPORT obj1 ... objn FROM LOGFILE ID key.
8. IMPORT DIRECTORY INTO itab FROM DATABASE dbtab(ar) ID key.
9. IMPORT (itab) FROM ... .
In some cases, the syntax rules that apply to Unicode programs are different than those for non-Unicode programs. For more details, see Storing Cluster Tables.
Variant 1
IMPORT obj1 ... objn FROM DATA BUFFER f.
Extras:
1. ... = f (for each object to be imported)
2. ... TO f (for each object to be imported)
3. ... ACCEPTING PADDING
4. ... ACCEPTING TRUNCATION
5. ... IGNORING STRUCTURE BOUNDARIES
6. ... IGNORING CONVERSION ERRORS
7. ... REPLACEMENT CHARACTER c
8. ... IN CHAR-TO-HEX MODE
9. ... CODE PAGE INTO f1
10. ... ENDIAN INTO f2
The syntax check performed in an ABAP Objects context is stricter than in other ABAP areas.
See You Cannot Use Implicit Field Names in Clusters.
Effect
Imports the data objects obj1 ... objn from the data buffer declared. The data buffer must be of type XSTRING . The data objects obj1 ... objn can be fields, structures, complex structures, or tables. The system imports all the data that has been stored in the data buffer f using the EXPORT ... TO DATA BUFFER statement and is listed here. It also checks that the structure used in the IMPORT statement matches the one in the EXPORT statement.
The Return Code is set as follows:
SY-SUBRC = 0:
The existing data objects in the data cluster specified were imported. The rest remain unchanged. (In some circumstances, this may mean that no data objects were imported).
SY-SUBRC = 4:
The data objects could not be imported. The contents of all the objects remain unchanged.
Addition 1
... = f (for each object to be imported)
Addition 2
... TO f (for each object to be imported)
Effect
The object is stored in the field f.
Addition 3
... ACCEPTING PADDING
Effect
This addition allows you to append new fields to the end
of structures, sub-structures, and internal tables. The IMPORT statement fills the additional fields with initial values; make existing fields (C, N, X, P, I1, and I2) longer; map character-type fields to STRING-type fields; or to map byte-type fields to XSTRING-type fields.
Addition 4
... ACCEPTING TRUNCATION
Effect
This addition allows you to shorten the last CHAR
fields, or to omit the last component at the top level. (Until Release 4.6, you could do this without using an addition).
Addition 5
... IGNORING STRUCTURE BOUNDARIES
Effect
This addition means that only the fragment sequence is
relevant - that is, that any sub-structures match. If you use this addition, the system ignores any alignment changes necessitated by Unicode - such as inserting named includes.
You cannot use this addition with either addition 3 (enlarge structure) or addition 4 (shorten structure), since it specifies that structure and include boundaries are to be ignored.
From Release 6.10 onwards, the include information is stored in datasets, so that the system can also check that includes match - that is, that sub-structures and includes (named or unnamed) are treated equally. When data is imported in a Release prior to 6.10, includes are not checked.
Addition 6
...IGNORING CONVERSION ERRORS
Effect
This addition prevents the system from triggering a
runtime error, if an error occurs when the character set is converted. '#' is used as a replacement character.
Addition 7
... REPLACEMENT CHARACTER c
Effect
The replacement character is used if a particular
character cannot be converted when the character set is converted.
This addition can only be used in conjunction with addition 6.
Addition 8
... IN CHAR-TO-HEX MODE
Effect
Not all character-type fields are converted. To convert
a field, you must create a field (or structure) that is identical to the exported field or structure, except that all its character-type components must be replaced with hexadecimal fields.
You can only use this addition in Unicode programs, to allow you to import camouflaged binary data as single-byte characters.
Moreover, you cannot use this addition in conjunction with the additions 3, 4, 5, 6, or 7.
Addition 9
... CODE PAGE INTO f1
Effect
The code page of the exported data is stored in the
character-type field f1 - for example, to analyze data that has been imported with the IN CHAR-TO-HEX MODE addition.
Addition 10
... ENDIAN INTO f2
Effect
The byte order (LITTLE or BIG) of the
exported data is stored in the field f2 - for example, to analyze data that has been imported with the IN CHAR-TO-HEX MODE addition. The field f2 must have the type ABAP_ENDIAN, which is defined in the type group ABAP. For this reason, the type group ABAP must be included in the ABAP program using a TYPE-POOLS statement.
Variant 2
IMPORT obj1 ... objn FROM INTERNAL TABLE itab.
Extras:
1. ... = f (for each object to be imported)
2. ... TO f (for each object to be imported)
3. ... ACCEPTING PADDING
4. ... ACCEPTING TRUNCATION
5. ... IGNORING STRUCTURE BOUNDARIES
6. ... IGNORING CONVERSION ERRORS
7. ... REPLACEMENT CHARACTER c
8. ... IN CHAR-TO-HEX MODE
9. ... CODE PAGE INTO f1
10. ... ENDIAN INTO f2
The syntax check performed in an ABAP Objects context is stricter than in other ABAP areas. See No implicit field names in cluster.
Effect
Imports the data objects obj1 ... objn (fields, structures, complex structures, or tables) from the specified internal table itab. The first column in the internal table must be of the predefined type INT2 and the second must be type X. To define the first column you must refer to a data element in the ABAP Dictionary that has the predefined type INT2.
All data that was stored in the internal table itab using EXPORT ... TO INTERNAL TABLE and listed, is imported. The system checks that the EXPORT and IMPORT structures match.
The Return Code is set as follows:
SY-SUBRC = 0:
The existing data objects in the specified data cluster were imported, the rest remain unchanged (it is possible that no data object was imported).
SY-SUBRC = 4:
The data objects could not be imported.
The contents of all listed objects remain unchanged
Addition 1
... = f (for each object to be imported)
Addition 2
... TO f (for each object to be imported)
Effect
Places the object in the field f.
Addition 3
... ACCEPTING PADDING
Effect
This addition allows you to add new fields to the ends
of structures, even to substructures and internal tables (the additional fields are filled with initial value during the IMPORT). It also allows you to increase the size of existing fields (C, N, X, P, I1, and I2) and to map Char fields to STRING type fields or byte fields to XSTRING type fields.
Addition 4
... ACCEPTING TRUNCATION
Effect
This addition allows you to shorten the last CHAR
field or omit the last component on the highest level (till Release 4.6 this was possible without specifying an addition).
Addition 5
... IGNORING STRUCTURE BOUNDARIES
Effect
This addition means that only the page order is
relevant, that is any substructures match. With this addition, the system also ignores alignment changes arising from the Unicode conversion (for example, due to subsequent insertion of named includes).
This addition rules out any subsequent structural enhancements (addition 3) or structural shortening (addition 4) because with this addition it is the structural limits and include limits that are to be ignored.
As from Release 6.10, the include information will also be stored in the dataset, so that it is possible to also check whether the includes match, that is substructures and includes (named or unnamed) are treated the same. When importing data that was exported in a Release lower than 6.10, the includes are not checked.
Addition 6
...IGNORING CONVERSION ERRORS
Effect
This addition has the effect that an error in the
character set conversion does not cause a runtime error. The system uses "#" as a replacement character.
Addition 7
... REPLACEMENT CHARACTER c
Effect
The system uses the specified replacement character if a
character cannot be converted during a character set conversion. If this addition is not specified, the system uses "#" as a replacement character.
This addition can only be used in conjunction with addition 6.
Addition 8
... IN CHAR-TO-HEX MODE
Effect
No character type fields are converted. For this you
must create a field or structure that is identical to the exported field or exported structure, except that all character type fields must be replaced with hexadecimal fields.
This addition, which is only allowed in programs with a set Unicode flag, allows you to import binary data disguised as single byte characters. This addition cannot be used in conjunction with additions 3, 4, 5, 6, and 7.
Addition 9
... CODE PAGE INTO f1
Effect
The codepage of the exported data is stored in the
character-type field f1 (for example, to be able to analyze the data imported with the addition IN CHAR-TO-HEX MODE).
Addition 10
... ENDIAN INTO f2
Effect
The byte order (LITTLE or BIG) of the
exported data is stored in the field f2 (for example, to be able analyze the data imported using the addition IN CHAR-TO-HEX MODE). The field f2 must be of type ABAP_ENDIAN, defined in type group ABAP. You must therefore include the type group ABAP in the ABAP program with a TYPE-POOLS statement.
Variant 3
IMPORT obj1 ... objn FROM MEMORY.
Extras:
1. ... = f (for each object to be imported) 2. ... TO f (for each object to be imported)
3. ... ID key
4. ... ACCEPTING PADDING
5. ... ACCEPTING TRUNCATION
6. ... IGNORING STRUCTURE BOUNDARIES
The syntax check performed in an ABAP Objects context is stricter than in other ABAP areas. See You Must Enter Identification and Cannot Use Implicit Field Names inClusters
Effect
Imports data objects obj1 ... objn (fields, structures, complex structures or tables) from a data cluster in the ABAP memory (see EXPORT). Reads in all data without an ID that was exported to memory with "EXPORT ... TO MEMORY.". In contrast to the variant IMPORT FROM DATABASE, it does not check that the structure matches in EXPORT and IMPORT.
The Return Code is set as follows:
SY-SUBRC = 0:
The existing data objects in the data cluster specified were imported. The rest remain unchanged (in some circumstances, this may mean that no data objects were imported).
SY-SUBRC = 4:
The data objects could not be imported, probably because the ABAP memory was empty.
The contents of all objects remain unchanged.
Note
You should always use the addition 3 (... ID key) with the statement. Otherwise, the effect of the variant is not certain (EXPORT statements in different parts of a program overwrite each other in the ABAP memory), since it exists only for reasons of compatibility with R/2.
Additional methods for selecting and deleting data clusters in the ABAP memory are provided by the system class CL_ABAP_EXPIMP_MEM.
Please consult Data Area and Modularization Unit Organization documentation as well.
Addition 1
... = f (for each object to be imported)
Addition 2
... TO f (for each object to be imported)
Effect
The object is placed in field f.
Addition 3
... ID key
Effect
Imports only data stored in ABAP memory under the ID key.
Notes
The key, key, must be a character-type data object (but not a string).
The Return Code is set as follows:
SY-SUBRC = 0:
The existing data objects in the data cluster specified were imported. The rest remain unchanged (in some circumstances, this may mean that no data objects were imported).
SY-SUBRC = 4:
The data objects could not be imported, probably because an incorrect ID was used.
The contents of all objects remain unchanged.
Addition 4
... ACCEPTING PADDING
Effect
This addition allows you to append new fields to the end of structures, sub-structures, and internal tables. The IMPORT statement fills the additional fields with initial values; make existing fields (C, N, X, P, I1, and I2) longer; map character-type fields to STRING-type fields; or to map byte-type fields to XSTRING-type fields.
Addition 5
... ACCEPTING TRUNCATION
Effect
This addition allows you to shorten the last CHAR field, or to omit the last component at the top level. (Until Release 4.6, you could do this without using an addition).
Addition 6
... IGNORING STRUCTURE BOUNDARIES
Effect
This addition means that only the fragment sequence is relevant - that is, that any sub-structures match. If you use this addition, the system ignores any alignment changes necessitated by Unicode - such as inserting named includes.
You cannot use this addition with either addition 3 (enlarge structure) or addition 4 (shorten structure), since it specifies that structure and include boundaries are to be ignored.
From Release 6.10 onwards, the include information is stored in datasets, so that the system can also check that includes match - that is, that sub-structures and includes (named or unnamed) are treated equally. When data is imported in a Release prior to 6.10, includes are not checked.
Related
EXPORT TO MEMORY, DELETE FROM MEMORY, FREE MEMORY
Variant 4
IMPORT obj1 ... objn FROM SHARED MEMORY itab(ar) ID key.
Extras:
1. ... = f (for each object to be exported) 2. ... TO f (for each object to be exported)
3. ... CLIENT g (before ID key)
4. ... TO wa (after itab(ar) or ID key )
5. ... ACCEPTING PADDING
6. ... ACCEPTING TRUNCATION
7. ... IGNORING STRUCTURE BOUNDARIES
The syntax check performed in an ABAP Objects context is stricter than in other ABAP areas.
See You Cannot Use Implicit Field Names in Clusters and You Cannot Use Table Work Areas.
Effect
Imports the data objects obj1 ... objn (fields, structures, complex structures, or tables) from shared memory. The data objects are read using the ID key from the area ar in the table itab - c.f. EXPORT TO SHARED MEMORY). You must use itab to specify a database table although the system reads from a memory table with the appropriate structure.
The Return Code is set as follows:
SY-SUBRC = 0:
The existing data objects in the data cluster specified were imported. The rest remain unchanged. (In some circumstances, this may mean that no data objects were imported).
SY-SUBRC = 4:
The data objects could not be imported. You may have used the wrong ID. The contents of all the objects remain unchanged.
Notes
The table dbtab named according to SHARED MEMORY must be declared using TABLES (except in addition 2).
The structure of fields (field symbols and internal tables) to be imported must match the structure of the objects exported in the dataset. The objects must be imported under the same names as those under which they were exported. Otherwise, they will not be imported.
The key length consists of: the client (3 digits, but only if tab is client-specific); area (2 characters); ID; and line number (4 bytes). It must not exceed 64 bytes - that is, the ID must not be longer than 55 characters, if the table is client- specific.
The key, key, must be a character-type data object (but not a string).
Additional methods for selecting and deleting data clusters in the shared memory are provided by the system class CL_ABAP_EXPIMP_SHMEM.
Please consult Data Area and Modularization Unit Organization documentation as well.
Addition 1
... = f (for each object to be imported)
Addition 2
... TO f (for each object to be imported)
Effect
The object is stored in the field f.
Addition 3
... CLIENT g (before ID key)
Effect
The data is imported from client g (provided the import/export table is tab client-specific). The client, g must be a character-type data object (but not a string).
Addition 4
... TO wa (after itab(ar) or ID key)
Effect
You need to use this addition if user data fields have been stored in the application buffer and are to be read from there. The work area wa is used instead of the table work area. The target area must correspond to the structure of the called table tab.
Addition 5
... ACCEPTING PADDING
Effect
This addition allows you to: append new fields to the end of structures, sub-structures, and internal tables. The IMPORT statement fills the additional fields with initial values; make existing fields (C, N, X, P, I1, and I2) longer; map character-type fields to STRING-type fields; or to map byte-type fields to XSTRING-type fields.
Addition 6
... ACCEPTING TRUNCATION
Effect
This addition allows you to shorten the last CHAR fields, or to omit the last component at the top level. (Until Release 4.6, you could do this without using an addition).
Addition 7
... IGNORING STRUCTURE BOUNDARIES
Effect
This addition means that only the fragment sequence is relevant - that is, that any sub-structures match. If you use this addition, the system ignores any alignment changes necessitated by Unicode - such as inserting named includes.
You cannot use this addition with either addition 4 (enlarge structure) or addition 5 (shorten structure), since it specifies that structure and include boundaries are to be ignored.
From Release 6.10 onwards, the include information is stored in datasets, so that the system can also check that includes match - that is, that sub-structures and includes (named or unnamed) are treated equally. When data is imported in a Release prior to 6.10, includes are not checked.
Related
EXPORT TO SHARED MEMORY, DELETE FROM SHARED MEMORY
Variant 5
IMPORT obj1 ... objn FROM SHARED BUFFER itab(ar) ID key.
Extras:
1. ... = f (for each object to be exported) 2. ... TO f (for each object to be exported)
3. ... CLIENT g (before ID key)
4. ... TO wa (last addition or after itab(ar))
The syntax check performed in an ABAP Objects context is stricter than in other ABAP areas.
See Cannot Use Implicit Fieldnames in Clusters und Cannot Use Table Work Areas.
Effect
Imports data objects obj1 ... objn (fields or
tables) from the cross-transaction application buffer. The data objects are read in the application buffer using the ID key of the area ar of the buffer area for the table itab (see EXPORT TO SHARED BUFFER). You must use dbtab to specify a database table although the system reads from a memory table with an appropriate structure.
The Return Code is set as follows:
SY-SUBRC = 0:
The existing data objects in the data cluster specified were imported. The rest remain unchanged (in some circumstances, this means that no data objects were imported).
SY-SUBRC = 4:
The data objects could not be imported, probably because an incorrect ID was used.
The contents of all objects remain unchanged.
Example
Import two fields and an internal table from the application buffer with the structure INDX:
TYPES: BEGIN OF ITAB3_LINE,
         CONT(4),
       END OF ITAB3_LINE.
DATA: INDXKEY LIKE INDX-SRTFD VALUE 'KEYVALUE',
      F1(4),
      F2(8) TYPE P DECIMALS 0,
      ITAB3 TYPE STANDARD TABLE OF ITAB3_LINE,
      INDX_WA TYPE INDX.
Import data.
IMPORT F1 = F1 F2 = F2 ITAB3 = ITAB3
       FROM SHARED BUFFER INDX(ST) ID INDXKEY TO INDX_WA.
After import, the data fields INDX-AEDAT and
INDX-USERA in front of CLUSTR are filled with
the values in the fields before the EXPORT
statement.
Notes
You must declare the table dbtab, named after DATABASE using a TABLES statement.
The structure of the fields, structures, and internal tables to be imported must match the structure of the objects exported to the dataset. Moreover, the objects must be imported with the same name used to export them. Otherwise, the import is not performed.
The maximum total key length is 64 bytes. It must include: a client if the table is client-specific (3 characters); an area (2 characters); identification; and line counter (4 bytes). This means that the number of characters available for the identification of a client-specific table is 55 characters.
The key, key, must be a character-type data object (but not a string).
Additional methods for selecting and deleting data clusters in the cross-transaction application buffer are provided by the system class CL_ABAP_EXPIMP_SHBUF.
Please consult Data Area and Modularization Unit Organization documentation as well.
Addition 1
... = f (for each object to be imported)
Addition 2
... TO f (for each object to be imported)
Effect
The object is placed in the field f
Addition 3
... CLIENT g (after dbtab(ar))
Effect
Takes the data from the client g (if the import/export table dbtab is client-specific). The client g must be a character-type data object (but not a string).
Addition 4
... TO wa (as the last addition or after itab(ar))
Effect
You need to use this addition if you want to save user data fields in the application buffer and then read them from there later. The system uses a work area wa instead of a table work area. The target area must have the same structure as the table tab.
Example
DATA: INDX_WA TYPE INDX,
      F1.
IMPORT F1 = F1 FROM SHARED BUFFER INDX(AR)
               CLIENT '001' ID 'TEST'
               TO INDX_WA.
WRITE: / 'AEDAT:', INDX_WA-AEDAT,
       / 'USERA:', INDX_WA-USERA,
       / 'PGMID:', INDX_WA-PGMID.
Variant 6
IMPORT obj1 ... objn FROM DATABASE dbtab(ar) ID key.
Extras:
1. ... = f (for each object to be imported)
2. ... TO f (for each object to be imported)
3. ... CLIENT g (before ID key )
4. ... USING form
5. ... TO wa (last addition or after dbtab(ar))
6. ... MAJOR-ID id1 (instead of ID key)
7. ... MINOR-ID id2 (with MAJOR-ID id1 )
8. ... ACCEPTING PADDING
9. ... ACCEPTING TRUNCATION
10. ... IGNORING STRUCTURE BOUNDARIES
11. ... IGNORING CONVERSION ERRORS
12. ... REPLACEMENT CHARACTER c
13. ... IN CHAR-TO-HEX MODE
14. ... CODE PAGE INTO f1
15. ... ENDIAN INTO f2
The syntax check performed in an ABAP Objects context is stricter than in other ABAP areas. See Cannot Use Implicit Fieldnames in Clusters and Cannot Use Table Work Areas.
Effect
Imports data objects obj1 ... objn (fields, structures, complex structures, or tables) from the data cluster with ID key in area ar of the database table dbtab (see EXPORT TO DATABASE).
The Return Code is set as follows:
SY-SUBRC = 0:
The existing data objects in the data cluster specified were imported. The rest remain unchanged (in some circumstances, this may mean that not data objects were imported).
SY-SUBRC = 4:
The data objects could not be imported, probably because an incorrect ID was used.
The contents of all objects remain unchanged.
Example
Import two fields and an internal table:
TYPES: BEGIN OF TAB3_TYPE,
          CONT(4),
       END OF TAB3_TYPE.
DATA: INDXKEY LIKE INDX-SRTFD,
      F1(4), F2 TYPE P,
      TAB3 TYPE STANDARD TABLE OF TAB3_TYPE WITH
                NON-UNIQUE DEFAULT KEY,
      WA_INDX TYPE INDX.
INDXKEY = 'INDXKEY'.
IMPORT F1   = F1
       F2   = F2
       TAB3 = TAB3 FROM DATABASE INDX(ST) ID INDXKEY
       TO WA_INDX.
Notes
You must declare the table dbtab, named after DATABASE, using the TABLES statement (except in addition 5).
The structure of fields, field strings and internal tables to be imported must match the structure of the objects exported to the dataset. In addition, the objects must be imported under the same name used to export them. If this is not the case, either a runtime error occurs or no import takes place.
Exception: You can lengthen or shorten the last field if it is of type CHAR, or add/omit CHAR fields at the end of the structure.
The key, key, must be a character-type data object (but not a string).
Additional methods for selecting and deleting data clusters in the database table specified are provided by the system class CL_ABAP_EXPIMP_DB.
Addition 1
... = f (for each object to be imported)
Addition 2
... TO f (for each object to be imported)
Effect
The object is placed in field f.
Addition 3
... CLIENT g (before the ID key)
Effect
Data is taken from the client g (in client-specific import/export databases only). Client g must be a character-type data object (but not a string).
Example
DATA: F1,
      WA_INDX TYPE INDX.
IMPORT F1 = F1 FROM DATABASE INDX(AR) CLIENT '002' ID 'TEST'
               TO WA_INDX.
Addition 4
... USING form
Note
This statement is for internal use only.
Incompatible changes or further developments may occur at any time without warning or notice.
Effect
Does not read the data from the database. Instead, calls the FORM routine form for each record read from the database without this addition. This routine can take the data key of the data to be retrieved from the database table work area and write the retrieved data to this work area. The name of the routine has the format <name of database table>_<name of form>; it has one parameter which describes the operation (READ, UPDATE or INSERT). The routine must set the field SY-SUBRC in order to show whether the function was successfully performed.
Addition 5
... TO wa (after key or after dbtab(ar))
Effect
You need to use this addition if you want to save user data fields in the cluster database and then read from there. The system uses the work area wa instead of a table work area. The target area entered must have the same structure as the table dbtab.
Example
DATA WA LIKE INDX.
DATA F1.
IMPORT F1 = F1 FROM DATABASE INDX(AR)
               CLIENT '002' ID 'TEST'
               TO WA.
WRITE: / 'AEDAT:', WA-AEDAT,
       / 'USERA:', WA-USERA,
       / 'PGMID:', WA-PGMID.
Addition 6
... MAJOR-ID id1 (instead of the ID key).
Addition 7
... MINOR-ID id2 (with MAJOR-ID id1)
This addition is not allowed in an ABAP Objects context. See Cannot Use Generic Identification.
Effect
Searches for a record the first part of whose ID (length of id1) matches id1 and whose second part - if MINOR-ID id2 is also declared - is greater than or equal to id2.
Addition 8
... ACCEPTING PADDING
Effect
This addition allows you to append new fields to the end of structures, sub-structures, and internal tables. The IMPORT statement fills the additional fields with initial values; make existing fields (C, N, X, P, I1, and I2) longer; map character-type fields to STRING-type fields; or to map byte-type fields to XSTRING-type fields.
Addition 9
... ACCEPTING TRUNCATION
Effect
This addition allows you to shorten the last CHAR fields, or to omit the last component at the top level. (Until Release 4.6, you could do this without using an addition).
Addition 10
... IGNORING STRUCTURE BOUNDARIES
Effect
This addition means that only the fragment sequence is relevant - that is, that any sub-structures match. If you use this addition, the system ignores any alignment changes necessitated by Unicode - such as inserting named includes.
You cannot use this addition with either addition 8 (enlarge structure) or addition 9 (shorten structure), since it specifies that structure and include boundaries are to be ignored.
From Release 6.10 onwards, the include information is stored in datasets, so that the system can also check that includes match - that is, that sub-structures and includes (named or unnamed) are treated equally. When data is imported in a Release prior to 6.10, includes are not checked.
Addition 11
...IGNORING CONVERSION ERRORS
Effect
This addition prevents the system from triggering a runtime error, if an error occurs when the character set is converted. '#' is used as a replacement character.
Addition 12
... REPLACEMENT CHARACTER c
Effect
The replacement character is used if a particular character cannot be converted when the character set is converted. If you do not use this addition, '#' is used as a replacement character.
This addition can only be used in conjunction with addition 11.
Addition 13
... IN CHAR-TO-HEX MODE
Effect
All character-type fields are not converted. To convert a field, you must create a field (or structure) that is identical to the exported field or structure, except that all its character-type components must be replaced with hexadecimal fields.
You can only use this addition in Unicode programs, to allow you to import camouflaged binary data as single-byte characters. Moreover, you cannot use this addition in conjunction with the additions 8, 9, 10, 11, and 12.
Addition 14
... CODE PAGE INTO f1
Effect
The code page of the exported data is stored in the character-type field f1 - for example, to analyze data that has been imported with the IN CHAR-TO-HEX MODE addition.
Addition 15
... ENDIAN INTO f2
Effect
The byte order(LITTLE or BIG) of the exported data is stored in the field f2 - for example, to analyze data that has been imported with the IN CHAR-TO-HEX MODE addition. The field f2 must have the type ABAP_ENDIAN, which is defined in the type group ABAP. For this reason, the type group ABAP must be included in the ABAP program using a TYPE-POOLS statement.
Variant 7
IMPORT obj1 ... objn FROM DATASET dsn(ar) ID key.
This variant is not allowed in an ABAP Objects context. See Cannot Use Clusters in Files
Note
This variant is no longer supported and cannot be used.
Variant 8
IMPORT obj1 ... objn FROM LOGFILE ID key.
Note
This statement is for internal use only.
Incompatible changes or further developments may occur at any time without warning or notice.
Extras:
1. ... = f (for each field f to be imported) 2. ... TO f (for each field f to be imported)
The syntax check performed in an ABAP Objects context is stricter than in other ABAP areas. See Cannot Use Implicit Field Names in Clusters
Effect
Imports data objects (fields, field strings or internal tables) from the update data. You must specify the update key assigned by the system (with current request number) as the key.
The key, key, must be a character-type data object (but not a string).
The Return Code is set as follows:
SY-SUBRC = 0:
The existing data objects in the data cluster specified were imported. The rest remain unchanged (in some circumstances, this may mean that no data objects were imported).
SY-SUBRC = 4:
The data objects could not be imported. An incorrect ID may have been used.
The contents of all objects remain unchanged.
Addition 1
... = f (for each object to be imported)
Addition 2
... TO f (for each object to be imported)
Effect
The object is placed in field f.
Variant 9
IMPORT DIRECTORY INTO itab FROM DATABASE dbtab(ar) ID key.
Extras:
1. ... CLIENT g (after dbtab(ar)) 2. ... TO wa (last addition or after dbtab(ar))
The syntax check performed in an ABAP Objects context is stricter than in other ABAP areas. See Cannot Use Table Work Areas.
Effect
Imports an object directory stored under the specified ID with EXPORT TO DATABASE into the table itab. The internal table itab may not have the type HASHED TABLE or ANY TABLE.
The key, key, must be a character-type data object (but not a string).
The Return Code is set as follows:
SY-SUBRC = 0:
The directory was successfully imported.
SY-SUBRC = 4:
The directory could not be imported, probably because an incorrect ID was used.
The internal table itab must have the same structure as the Dictionary structure CDIR (INCLUDE STRUCTURE).
Addition 1
... CLIENT g (before ID key)
Effect
Takes data from the client g (only with client-specific import/export databases). Client g must be a character-type data object (but not a string).
Addition 2
... TO wa (last addition or after dbtab(ar))
Effect
Uses the work area wa instead of the table work area. When you use this addition, you do not need to declare the table dbtab, named after DATABASE using a TABLES statement. The work area entered must have the same structure as the table dbtab.
Example
Directory of a cluster consisting of two fields and an internal table:
TYPES: BEGIN OF TAB3_LINE,
         CONT(4),
       END OF TAB3_LINE,
       BEGIN OF DIRTAB_LINE.
         INCLUDE STRUCTURE CDIR.
TYPES END OF DIRTAB_LINE.
DATA: INDXKEY LIKE INDX-SRTFD,
      F1(4),
      F2(8)   TYPE P decimals 0,
      TAB3    TYPE STANDARD TABLE OF TAB3_LINE,
      DIRTAB TYPE STANDARD TABLE OF DIRTAB_LINE,
      INDX_WA TYPE INDX.
INDXKEY = 'INDXKEY'.
EXPORT F1 = F1
       F2 = F2
       TAB3 = TAB3
       TO DATABASE INDX(ST) ID INDXKEY " TAB3 has 17 entries
       FROM INDX_WA.
IMPORT DIRECTORY INTO DIRTAB FROM DATABASE INDX(ST) ID INDXKEY
       TO INDX_WA.
Then, the table DIRTAB contains the following:
NAME     OTYPE FTYPE TFILL FLENG
F1         F      C      0      4
F2         F      P      0      8
TAB3       T      C      17     4
The meaning of the individual fields is as follows:
NAME:
Name of stored object
OTYPE:
Object type (F: Field, R: Field string / Dictionary struc

Importing internal table from diffrent program

HI experts,
i have two ALV report zprograms . My requirements is i have to write a report in that report i want to pass input screen parameters to each report and get their final intarnal table without generating ALV. How is it possible.
my question is i want to call any program and export values of thier screen parameter and get the final internal table as export.
Pls Help. THanks in advace
Ajay Kuamr

Hello Ajay,
In each of the report you can EXPORT the internal table contents to SAP memory & IMPORT the table contents in the third program.
You have to use SUBMIT statements for each report & get back the internal table using IMPORT statements.
For further details explore SDN.
BR,
Suhas

Exporting and Importing a table in Lookout 6.0.2 using Office 2007

I am exporting a table to Excel 2007 from Lookout 6.0.2 so I can make changes and then import the table with changes back into Lookout. I have done this in the past with Excel 2003 and have had no problems. When I export the table the file that is created is an Excel 97-2003 workbook file, so after I make changes to the file in Excel 2007, I save the file as an Excel 97-2003 workbook because that is what is was initially and that is the only type of file Lookout sees when trying to do an import. Problem is when go to import this file I get an error saying 'cannot read file format'.
Any help would be greatly appreciated.
Thanks!
Jason
Jason Phillips

Lookout Datatable object can only read worksheet file, but unfortunately Excel 2007 can not save as worksheet any more.
I have not found a way to use datatable with excel 2007 yet.
One workaround is to use ODBC. Refer to this article.
http://digital.ni.com/public.nsf/allkb/C8137C6BDA276982862566BA005C5D1F?OpenDocument
Ryan Shi
National Instruments

Exporting and importing just table definitions

Hi,
I have this production database that has a huge amount of data in it. I was asked to set up a test database based on the exact same schema as the live database. When I tried to do an export (from live) and import (to test), with the parameters rows=N and compress=y, the target (test database) data file will still grow enormously, presumably because of the huge number of extents already allocated to the table in the live database. My test database of course, has a limited hard-disk space.
Is there a way to export and import the table definitions without having the target database experiencing a huge growth in the size of the tablespace?
Thanks,
Chris.

If an export with compress=n is still creating initial extents that a too large, you can still build with the import file but it will take a little work.
run imp with indexfile=somefile.sql
when imp is finished, edit somefile.sql by:
1. remove all the REM statements.
2. remove all the storage clauses (tables and indexes)
Make sure your tablespaces have a small (say 1k) default initial extent.
run imp again with rows=n
All your tables and indexes will be created with the default tablespace initial extent.

Important CRM TABLES

Similar Messages

Maybe you are looking for