In JDBC Sender Adapter , the server is Microsoft SQL .I need to pass current date as the input column while Executing stored procedure, which will get me 10 Output Columns. Kindly suggest me the SQL Query String

In JDBC Sender Adapter , the server is Microsoft SQL .I need to pass current date as the input column while Executing stored procedure, which will get me 10 Output Columns. Kindly suggest me the SQL Query String , for executing the Stored Procedure with Current date as the input .

Hi Srinath,
The below blog might be useful
http://scn.sap.com/community/pi-and-soa-middleware/blog/2013/03/06/executing-stored-procedure-from-sender-adapter-in-sap-pi-71
PI/XI: Sender JDBC adapter for Oracle stored procedures in 5 days
regards,
Harish

Similar Messages

Can I pass an array as an input parameter for a stored procedure on SQL Server 2000

I am trying to pass an array to a stored procedure residing on my SQL Server 2000 database server. Is this even possible? If it is possible, what is the syntax for this?
Any help would be greatly appreciated.
Thanks

I have passed arrays to and from a database using SQL and ActiveX, including to and from stored procedures, but I cannot recall the precise method used to do so. If memory serves, everything is in the form of a string. You need to do a lot of parsing and 'unparsing' to get this data into your stored procedure.
You are left with a couple of options to get your data to the stored procedure. I recommend using SQL in LabVIEW wherever possible as it saves the amount of external code calls (and believe me, calling ActiveX procedures developed by someone else in Visual Basic is NOT much fun at all...). You can either send the array and other data to the stored procedure (you will find the syntax in the SQL references in LabVIEW help under SQL), or you can send
the array to the database, and have the database then act upon the array.
I strongly recommend making routines (subVIs) to handle these operations.
Sorry I don't have the syntax, I don't have SQL installed on this machine. If you can't find the syntax in the help, please post here again.
-Mike Du'Lyea

MS SQL Server 2005... Problem while executing stored procedure

Hi.. all
I have got a problem with sql server 2005
When i execute any stored procedure on a remote database using
ResultSet.TYPE_SCROLL_INSENSITIVE,
ResultSet.CONCUR_READ_ONLY
options, it throws SQL Exception with following message
"A server cursor cannot be opened on the given statement or statements. Use a default result set or client cursor."
Note: Every thing works fine, if I execute the same sp from the PC where sql server is installed, it throws this exception only when i execute sp from a computer different thn one where SQL server is installed.
Here is d code.
CallableStatement call = conn.prepareCall( "{call getAttributeLabelValues(?,?,?)}",
ResultSet.TYPE_SCROLL_INSENSITIVE,
ResultSet.CONCUR_READ_ONLY
// set parameters.
ResultSet rs = call.executeQuery( ) ;
If I remove options
ResultSet.TYPE_SCROLL_INSENSITIVE,
ResultSet.CONCUR_READ_ONLY
while executin SP, thn every thing works fine.
here is d exception
com.microsoft.sqlserver.jdbc.SQLServerException: A server cursor cannot be opened on the given statement or statements. Use a default result set or client cursor.
at com.microsoft.sqlserver.jdbc.SQLServerException.makeFromDatabaseError(Unknown Source)
at com.microsoft.sqlserver.jdbc.IOBuffer.processPackets(Unknown Source)
at com.microsoft.sqlserver.jdbc.SQLServerStatement.sendExecute(Unknown Source)
at com.microsoft.sqlserver.jdbc.SQLServerStatement.doExecuteQuery(Unknown Source)
at com.microsoft.sqlserver.jdbc.SQLServerPreparedStatement.executeQuery(Unknown Source)
I will appreciate any help.
Sudhir
http://www.jyog.com

use sql server jdbc driver v1.2..........

SOAP TO JDBC scenario: calling stored procedure which will return the value

Hi
I have Soap To Jdbc scenario in which I am going to call the Stored Procedure at target side which will be executed and it is going to return the result set .
Result contains following values.
return code as ( 0 Or 1) and also specific exception message if its return code as 1.
Could you suggest me the way by which I can handled this return code and send it back to the Sap PI system then the same thing is directed the to SMTP server for sending mail to consern person.
Regards
Kumar

The OUT parameters of stored procedure will be returned as response. Where exactly are you facing the proble? Here is a complete walkthourgh
/people/luis.melgar/blog/2008/05/13/synchronous-soap-to-jdbc--end-to-end-walkthrough
In your case, you don't want response at sender. Instead you want to mail it. For this you may use BPM to design your scenario with following steps
Receive (to receive data from sender)
Send Sync (to stored procedure and get response)
Send Async (to mail receiver)
Regards,
Prateek

JDBC Sender Adapter to Oracle Server

Hi Friends,
Iam using JDBC Sender Adapter to connect to Oracle Server. I have mentioned all the parameters in the Configuration(sender communication channel) correctly.My Adapter Monitoring in RWB shows a message that "Processing finished successfully"...But I cannot see the data in SXMB_MONI. I mean the data is not getting picked from the Database..I have worked on the similar scenario previously and it was working fine...
I have specified the datatype structure correctly.
resultset
>row
>>field1
>>field2
wat is the problem.
regards,
raju...

Hi,
Can you check the following,
1. Check the SELECT query in your Sender JDBC adapter. Does it actually return any rows?
2. The values enterd for Documentname and DocumentNamespace in your Sender JDBC adapter. You have to enter the name of the Datatype and the namespace in these fields.
3.Have you enterd these details while doing the adapter configuration,
<b>jdbc:oracle:thin:@<IP adress>:<listener port>:<instance name (database name)>
Driver oracle.jdbc.driver.OracleDriver</b>
Regards,
Bhavesh

How many times does the JDBC sender adapter retry ?

Hi All,
How many times does the JDBC sender adapter retry in the ' Retry Interval' specified .
I know that it retries after the time specified in the ' retry interval' , but if it again fails after the first retry will it retry again and again .And while doing it will it block the next Select query which should get executed.
Thanks & Regards,
Rahul

Hi,
The no of times to be retired on failure of message is default 3 times.
You can set this in Visual Administrator->Server->Services----> SAP XI Adapter
Thanks
Swarup
Edited by: Swarup Sawant on May 30, 2008 7:19 PM

JDBC Sender adapter is reading but then there isn't the message in SXMB_MON

Hi,
I have a JDBC to RFC async scenario. All configured.
Now the JDBC Sender adapter is reading the database table and if I go to communication channel monitoring ther is a "Processing finished succefully" message and an message ID like that: "0e4fd3b0acba11ddb65e0002a5adffd2".
But then I go to SXMB_MONI or message monitoring in RWB and there isn't a message to check...
What's happening? How can I know what the JDBC adapter has read and why there isn't an error but there isn't a message?

Hi
Well u r that means no polling happening with u r Select statement
may be format is correct i agree ,,can u able to get resultset using the Select staement running on SQL PLus ??
check wether status flag is set right
paste u r slect statement and update statement
rgds
srini

JDBC Sender Adapter - No Namespace found

Hello
I am currently using PI 7.1. The scenario is JDBC to ECC ABAP Client Proxy. When the JDBC Sender Adapter sends the data to the Integration Server, the root element does not contain the xmlns attribute. This root element is constructed from the Document Name of the JDBC Sender Adapter attribute.
I am getting the following error:
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
- 
- <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="">
<SAP:Category>Application</SAP:Category>
<SAP:Code area="MAPPING">EXCEPTION_DURING_EXECUTE</SAP:Code>
<SAP:P1>com/sap/xi/tf/_MM_HIS_Material_Consumption_</SAP:P1>
<SAP:P2>com.sap.aii.mappingtool.tf7.IllegalInstanceExcepti</SAP:P2>
<SAP:P3>on: Cannot create target element /ns0:MT_Material_</SAP:P3>
<SAP:P4>Consumption_ECC/Material. Values missing in queue~</SAP:P4>
<SAP:AdditionalText />
<SAP:Stack>Runtime exception occurred during application mapping com/sap/xi/tf/_MM_HIS_Material_Consumption_; com.sap.aii.mappingtool.tf7.IllegalInstanceException: Cannot create target element /ns0:MT_Material_Consumption_ECC/Material. Values missing in queue~</SAP:Stack>
<SAP:Retry>M</SAP:Retry>
</SAP:Error>
When I perform a test at RWB, the message gets posted successfully. Once posted, the payload of this message contains the xmlns attribute.
Here is the root element from both the instances:
From RWB: <ns0:MT_Material_Consumption_JDBC xmlns:ns0="http://xxx.com/xxx/finance">
From JDBC Adapter: <ns0:MT_Material_Consumption_JDBC>
Could you please let me know, what has to be done to obtain the xmlns in the sender payload?
Thank you in advance.
John Jeyaraj
Edited by: John jeyaraj on Apr 7, 2011 8:22 AM

Hi Hiren
When I test the MM without the xmlns attribute, I get the following error:
The prefix "ns0" for element "ns0:MT_Material_Consumption_JDBC" is not bound.
When I add the xmlns attribute, the mapping is successful.
Thanks
John

Store procedure call to fetch data in JDBC sender adapter

Hi guys,
I have to fetch data from a Oracle server through JDBC adpater.
the partner has in place some store procedure that have to be used with this purpose.
But al the time I try to call a store procedure I got error that variables are not binded.
I fill up the query sql statement field with following text
call <store procedure name> (v1 OUT VARCHAR2, v2 in varchar2)
Does anyone know the syntax to access such store procedure within jdbc adapter?
As far as I know the jdbc call the store procedure with Callable statement but the paremeters need to be linked to datatype,but here I do not see such possibility.

HI
A stored procedure is a subroutine available to applications accessing a relational database system. Stored procedures (sometimes called a sproc or SP) are actually stored in the database data dictionary.
Typical uses for stored procedures include data validation (integrated into the database) or access control mechanisms. Furthermore, stored procedures are used to consolidate and centralize logic that was originally implemented in applications. Large or complex processing that might require the execution of several SQL statements is moved into stored procedures and all applications call the procedures only.
Stored procedures are similar to user-defined functions (UDFs). The major difference is that UDFs can be used like any other expression within SQL statements, whereas stored procedures must be invoked using the CALL statement
Stored procedures can return result sets, i.e. the results of a SELECT statement. Such result sets can be processed using cursors by other stored procedures by associating a result set locator, or by applications. Stored procedures may also contain declared variables for processing data and cursors that allow it to loop through multiple rows in a table. The standard Structured Query Language provides IF, WHILE, LOOP, REPEAT, CASE statements, and more. Stored procedures can receive variables, return results or modify variables and return them, depending on how and where the variable is declared.
http://help.sap.com/saphelp_nw04/helpdata/en/1d/756b3c0d592c7fe10000000a11405a/content.htm
One of the usage is to prevent the query to directly write to the database
http://en.wikipedia.org/wiki/Stored_procedure
Check these:
http://help.sap.com/saphelp_nw04s/helpdata/en/b0/676b3c255b1475e10000000a114084/frameset.htm
http://help.sap.com/saphelp_nw04s/helpdata/en/4d/8c103e05df2e4b95cbcc68fed61705/frameset.htm
Integration with Databases made easy Part 1.
JDBC Stored Procedures
http://help.sap.com/saphelp_nw04/helpdata/en/45/023c41325fa831e10000000a1550b0/frameset.htm
Calling stored procs in MaxDb using SAP Xi
cheers

PI 7.1 JDBC sender adapter huge load from DB select

Hi,
We have the problem that the JDBC sender adapter is selecting a huge amount of data from a Oracle DB. The Adapter seems to be able to cope the load but when sending to the integration server it causes problems. We found values to adjust but I dont think increasing them is a good solution.
My question is:
Is there any way to send the data in blocks with using the PI standard JDBC adapter ?
Thank you and regards,
Andreas

Hi,
You can use the below parameter in JDBC sender.
   Specify additional Parameter Names and Parameter Values in the table.
Due to messages of large size it may cause issue
Following are the parameters to be set in the table to limit the message size per polling:
●      msgLimit :
●      maxMsgSize : SAP note 1253826.
●      maxRowSize : SAP note 1253826.
Additional parameters are published in SAP Note 801367.
Refer the link.
Defining Additional Parameters in Advanced mode
http://help.sap.com/saphelp_nw73/helpdata/en/7e/5df96381ec72468a00815dd80f8b63/content.htm

JDBC Sender Adapter - Single Select and Single Delete

Hi,
I have the requirement where I have to select the single row (or 1st row) from database through JDBC Sender Adapter and delete that record after selection in single polling.
Please help me out with proper SQL query or with any other approach.
Thanks and Regards,
Vijay

I think in SQL select statment you have something like Select TOP number....where number is 1,2..
The detailed syntax for the SELECT clause is as follows:
SELECT [ALL | DISTINCT] [TOP nExpr [PERCENT]] Select_List_Item [AS Column_Name] [, ...]
for more details...check out..
http://msdn2.microsoft.com/en-us/library/95c6ex88(VS.80).aspx
Document sent on your email id.
Nilesh

How to update two tables in a single call using JDBC Sender adapter

Hello All,
The scenario is, database entries have to be selected from two tables and at the same time those tables have to be udpated with the flag.
We are using JDBC sender adapter and in Select Query, we are fetching the data by joinin the two tables.
Update Statemtent: We can only update one table using this statement.
Is it possible to update two tables using the Update Statement without using Stored Procedures.
Let me know.
Regards,
Sreenivas.

Hi Sreenivas,
> Is it possible to update two tables using the Update Statement without using Stored Procedures.
Yes its possible through join statement
Check this links
Update in JDBC Sender adapter for more than one table
data from 2 tables for jdbc sender adapter
Regards
Ramesh

JDBC Sender Adapter - Records sent one at a time

Hello everyone,
Here's a summary of my scenario JDBC > XI > RFC.
My select statement (JDBC) looks like this:
SELECT * FROM BATCH WHERE STATUS='Y'
The problem is, whenever it returns multiple rows, the RFC can only accept one record at a time (1...1), so I need to pick up the records from the DB and send them one at a time.
Currently, this is how the output XML looks like:
<?xml version="1.0" encoding="utf-8" ?>
<ns:SQL_RESP_MT xmlns:ns="http://www.pharmaindustries.com">
<row>
<number>200000000472</number>
<status>Y</status>
</row>
<row>
<number>200000000473</number>
<status>Y</status>
</row>
<row>
<number>200000000474</number>
<status>Y</status>
</row>
</ns:SQL_RESP_MT>
Instead, I need each row to be picked up and sent one at a time.
<?xml version="1.0" encoding="utf-8" ?>
<ns:SQL_RESP_MT xmlns:ns="http://www.pharmaindustries.com">
<row>
<number>200000000472</number>
<status>Y</status>
</ns:SQL_RESP_MT>
<?xml version="1.0" encoding="utf-8" ?>
<ns:SQL_RESP_MT xmlns:ns="http://www.pharmaindustries.com">
<number>200000000473</number>
<status>Y</status>
</row>
</ns:SQL_RESP_MT>
<?xml version="1.0" encoding="utf-8" ?>
<ns:SQL_RESP_MT xmlns:ns="http://www.pharmaindustries.com">
<number>200000000474</number>
<status>Y</status>
</row>
</ns:SQL_RESP_MT>
Does anyone know the changes I need to make in my current SELECT statement or the JDBC Sender Adapter to make this possible.
Thanks in advance!
Glenn

Thank you all for your replies. I'll check out your link in a bit, Phani. Thanks!
A SpliByValue won't work since the BAPI Header is (1...1).
Luckily, during testing, I found out that the BAPI (BAPI_PRODORDCONF_CREATE_TT) handles multiple lines in one of the subelements of the header so that was where I mapped the Rows.
I might need to trigger multiple BAPIs in the future, so I'll take a good look at your suggestions, but for now, I'm marking this question answered.
Warm regards,
Glenn

Event Handling in JDBC sender adapter

Hi,
please help me in this scenario.
Scenario is Third Party will update the Header and Item values in to Database table.
Once the update is done , a program will run in Thrid party system and it will update the Event Table with the primary key value of the DB table.
So my JDBC sender should be looking for the event table updation. Whenever there is an update in the event table the JDBC sender should automatically kicked off and it should select all the field in the DB table where the primary key = Event table.primary key and the values will be generated as an Idoc.
1.How will i achive this scenario.
2.How to configure the JDBC sender Adapter which gets triggered automatically when there is an updation in event table.
please advice.
Thanks,
Sujatha

Hi,
>>2.How to configure the JDBC sender Adapter which gets triggered automatically when there is an updation in event table.
There is way to control the Communciation Channel externally. Refer this help document http://help.sap.com/saphelp_nw04/helpdata/EN/45/0c86aab4d14dece10000000a11466f/content.htm.
Or alternately you can create a query that always queries only the updated record and configure the JDBC adapter which would periodiocally look the DB...
~SaNv...

JDBC Sender Adapter

Hi everybody
I have the following error in my JDBC to JDBC scenario; I configured the JDBC sender adapter and receive the following message back. In the Configuration I set Document Name to MT_ScanningStatus:
<?xml version="1.0" encoding="utf-8" ?>
<MT_ScanningStatus>
<row>
<ScannerNb>1</ScannerNb>
<Status>0</Status>
</row>
<row>
<ScannerNb>2</ScannerNb>
<Status>2</Status>
</row>
<row>
<ScannerNb>3</ScannerNb>
<Status>0</Status>
</row>
<row>
<ScannerNb>4</ScannerNb>
<Status>2</Status>
</row>
</MT_ScanningStatus>
I defined the corresponding datatype as follow:
DT_ScanningStatus Complex Type
        row              Element 1...unbounded
          ScannerNb      Element 1
          STatus         Element 1
In the following Mapping I tried to Map this structure to the Structure used to send an Update SQL Statement to the JDBC Receiver to update the same table. A normal Test in the Mapping Tool runs fine but when I enter under source the above incoming Message from the JDBC Adapter I got the following error. I think the incoming message cannot be interpreted. Can someone support me? I read the documentation for the JDBC adapter and also a lot of weblogs and discussion threads. Maybe someone knows a weblog describing more detailed the sender adapter and how to handle the incoming Message!!
Thanks in advance Oliver
14:58:03 Start of test
Compilation of MM_JDBC_to_JDBC_test successful
Fatal Error: com.sap.engine.lib.xml.parser.ParserException: XML Declaration not allowed here.(:main:, row:1, col:8)
com.sap.aii.utilxi.misc.api.BaseRuntimeException: Fatal Error: com.sap.engine.lib.xml.parser.ParserException: XML Declaration not allowed here.(:main:, row:1, col:8)
at com.sap.aii.mappingtool.tf3.rt.xparser.MTSaxHandler.run(MTSaxHandler.java:130)
at com.sap.aii.mappingtool.tf3.rt.xparser.XParser.run(XParser.java:68)
Root Cause:
com.sap.engine.lib.xml.parser.NestedSAXParserException: Fatal Error: com.sap.engine.lib.xml.parser.ParserException: XML Declaration not allowed here.(:main:, row:1, col:8)(:main:, row=1, col=8) -> com.sap.engine.lib.xml.parser.ParserException: XML Declaration not allowed here.(:main:, row:1, col:8)
at com.sap.engine.lib.xml.parser.XMLParser.scanPI(XMLParser.java:2009)
at com.sap.engine.lib.xml.parser.XMLParser.scanProlog(XMLParser.java:2657)
at com.sap.engine.lib.xml.parser.XMLParser.scanDocument(XMLParser.java:2713)
at com.sap.engine.lib.xml.parser.XMLParser.parse0(XMLParser.java:162)
at com.sap.engine.lib.xml.parser.AbstractXMLParser.parseAndCatchException(AbstractXMLParser.java:132)
at com.sap.engine.lib.xml.parser.AbstractXMLParser.parse(AbstractXMLParser.java:142)
at com.sap.engine.lib.xml.parser.AbstractXMLParser.parse(AbstractXMLParser.java:245)
at com.sap.engine.lib.xml.parser.Parser.parseWithoutSchemaValidationProcessing(Parser.java:276)
at com.sap.engine.lib.xml.parser.Parser.parse(Parser.java:338)
at com.sap.engine.lib.xml.parser.SAXParser.parse(SAXParser.java:125)
at javax.xml.parsers.SAXParser.parse(SAXParser.java:345)
at com.sap.aii.mappingtool.tf3.rt.xparser.MTSaxHandler.run(MTSaxHandler.java:128)
at com.sap.aii.mappingtool.tf3.rt.xparser.XParser.run(XParser.java:68)
at com.sap.engine.lib.xml.parser.SAXParser.parse(SAXParser.java:144)
at javax.xml.parsers.SAXParser.parse(SAXParser.java:345)
at com.sap.aii.mappingtool.tf3.rt.xparser.MTSaxHandler.run(MTSaxHandler.java:128)
at com.sap.aii.mappingtool.tf3.rt.xparser.XParser.run(XParser.java:68)
Caused by: com.sap.engine.lib.xml.parser.ParserException: XML Declaration not allowed here.(:main:, row:1, col:8)
at com.sap.engine.lib.xml.parser.XMLParser.scanPI(XMLParser.java:2009)
at com.sap.engine.lib.xml.parser.XMLParser.scanProlog(XMLParser.java:2657)
at com.sap.engine.lib.xml.parser.XMLParser.scanDocument(XMLParser.java:2713)
at com.sap.engine.lib.xml.parser.XMLParser.parse0(XMLParser.java:162)
at com.sap.engine.lib.xml.parser.AbstractXMLParser.parseAndCatchException(AbstractXMLParser.java:132)
at com.sap.engine.lib.xml.parser.AbstractXMLParser.parse(AbstractXMLParser.java:142)
at com.sap.engine.lib.xml.parser.AbstractXMLParser.parse(AbstractXMLParser.java:245)
at com.sap.engine.lib.xml.parser.Parser.parseWithoutSchemaValidationProcessing(Parser.java:276)
at com.sap.engine.lib.xml.parser.Parser.parse(Parser.java:338)
at com.sap.engine.lib.xml.parser.SAXParser.parse(SAXParser.java:125)
... 3 more
Fatal Error: com.sap.engine.lib.xml.parser.ParserException: XML Declaration not allowed here.(:main:, row:1, col:8)

Hi Oliver,
>>>>source the above incoming Message from the JDBC Adapter I got the following error. I think the incoming message cannot be interpreted.
do this:
in the test tab try your mapping once more
(the correct one)
then save the source xml as file
next compare this saved file with the one
you get from the jdbc sender
>>>>>Declaration not allowed here.(:main:, row:1, col:8)
and compare the first lines in those two XML files
are they the same?
Regards,
michal
<a href="/people/michal.krawczyk2/blog/2005/06/28/xipi-faq-frequently-asked-questions"><b>XI / PI FAQ - Frequently Asked Questions</b></a>

In JDBC Sender Adapter , the server is Microsoft SQL .I need to pass current date as the input column while Executing stored procedure, which will get me 10 Output Columns. Kindly suggest me the SQL Query String

Similar Messages

Maybe you are looking for