Insufficient privileges while creating change set.

Hi,
I'm trying to setup CDC in Async Distributed HotLog mode with source 9i (9.2.0.7) and stage 10.2 database. Change source was created successfully, but when i run DBMS_CDC_PUBLISH.CREATE_CHANGE_SOURCE it gives error
ORA-01031: insufficient_privileges
ORA-09512: at "SYS.DBMS_CDC_PUBLISH", line 560
It does create the propagation on source db for this change set and then gives this error. I'm following the chapter 16 of data warehousing guide to set it up. Have checked all privileges and I can't seem to figure this out. Has anyone faced something similar? what am i missing here?
Regards.
Ali

Hi Ali,
I had the same thing with plain Streams (dbms_streams_adm.add_Table_rule).
The user with wich you set it up should have DBA role (that's somehow the requirement from Oracle, I would rather see some specific system-privileges in stead of having the whole DBA role to be granted). Another thing is that I wanted to create a package with functionality to setup my Streams environment. But in then the first time you would add table or schema rules, it creates the Capture or Apply process. And for that you need specific rights that are granted through the DBA role. But the Oracle rights-implementation prevents privileges granted via a Role to be used in a stored pl/sql-procedure. To be used in a stored-procedure you need the specific rights granted directly. That's another reason I'm not fond of the requirement of having to grant the DBA role.
So grant the DBA role to your user, if not done allready, or if you use a stored procedure to setup your cdc then do the first call directly from an sqlplus script and not within your stored pl/sql code. Subsequent calls can then be made from your stored-procedure.

Similar Messages

Insufficient privileges while creating EUL

Hi All,
I am trying to create a new EUL in Discoverer 9.0.4. Option "Select an existing user" is selected and "Grant access to Public" is unchecked.
I am connected as user A. The tables are in schema for user B. So I selected the user B and entered the password. When I click "Finish", I get the following error:
Insufficient privileges to create a new user or grant the necessary privileges to an existing user. You must have CREATE USER, ALTER USER and GRANT ANY PRIVILEGE privileges.
Now user A does have privileges to create role, view, table, session, sequence, procedure. User B too has these privileges plus a few more.
Can somebody help me with what privileges am I lacking? For which user, A or B?
Thanks.

If you want to create an EUL the user you select (B in your case) must be the following privilegies:
CREATE SESSION
CREATE USER
GRANT ANY PRIVILEGE
ALTER USER
It doesn't matter the user you are connected in Discoverer.
Hope this helps.

Giving error of insufficient privileges while creating triggers

Hi all,
I am facing the problem of insuffcient privilege on base tables while creating triggers. I have three schemas say A, B, C in my database.
Base tables are in schema A. I have given all the grants on base table to schema B and C.
grant all on base_table_name to B;
grant all on base_table_name to C;
I have created synonym also on that base table.
And i m creating triggers in schema B.
When i execute the query for trigger the it giving following error :
+AFTER INSERT OR UPDATE OR DELETE ON BASE_TBALE_NAME *+
ERROR at line 3:
ORA-01031: insufficient privileges
even i have checked in dba_tab_privs for that base_table.....it is showing all the grants to USER B and C.
What should I do now?
please suggest.......
Regards,
Andy.

Hi karan,
You are right. While searching docs i got the solution of my problem.
Privileges Required to Use Triggers
To create a trigger in your schema:
+•You must have the CREATE TRIGGER system privilege+
+•One of the following must be true:+
+◦You own the table specified in the triggering statement+
+◦You have the ALTER privilege for the table specified in the triggering statement+
+◦You have the ALTER ANY TABLE system privilege+
To create a trigger in another schema, or to reference a table in another schema from a trigger in your schema:
+•You must have the CREATE ANY TRIGGER system privilege.+
+•You must have the EXECUTE privilege on the referenced subprograms or packages.+
To create a trigger on the database, you must have the ADMINISTER DATABASE TRIGGER privilege. If this privilege is later revoked, you can drop the trigger but not alter it.
The object privileges to the schema objects referenced in the trigger body must be granted to the trigger owner explicitly (not through a role). The statements in the trigger body operate under the privilege domain of the trigger owner, not the privilege domain of the user issuing the triggering statement (this is similar to the privilege model for stored subprograms).
I have to grant only create any trigger to user.
Problem solved.
Thanks to all for ur help.
Regards,
Andy.

Insufficient privileges when creating MV with alter session set current_sch

I am getting Insufficient privileges when creating MV with alter session set current_schema=Application schema name. User running the alter session is DBA user. If run as SYSDBA, MV is created successfully. DB Version is 10.2.0.3
I observed similiar issue with regular View also in 9.2.0.6 also.
Any advice is greatly appreciated.
Thanks,
Siva

Sounds like your management needs a stern lecture on the concept of change management. <g>
I am not debating what you do. I am questioning the logic, or lack thereof, of doing it that way. My recommendation would be to change your procedure to one that:
A. Is more in line with good change management practices.
B. Works.

Insufficient Privileges when create materialized view as user system

If I login as system (connect sys/****@DevDB) and try to create a materialized view for another schema (e.g. XDCONTROLDB), I get the insufficient privileges error. If I login as sys as sysdba then I can create successfully.
I have searched some ariticles in Google and grant create any snapshot, create any table, create any view, global query rewrite, select any table system privileges to system but still get the same error.
Any other privileges I need to grant to system?
Cheers
below is a sample script to create the view which get the error:
CREATE MATERIALIZED VIEW XDControlDB."XDTest1" PCTFREE 10
PCTUSED 0 MAXTRANS 255
STORAGE ( INITIAL 64K NEXT 0K MINEXTENTS 1 MAXEXTENTS
2147483645 PCTINCREASE 0)
TABLESPACE "USERS"
BUILD IMMEDIATE
REFRESH COMPLETE START WITH sysdate NEXT sysdate + 1/24
ENABLE QUERY REWRITE AS
SELECT * From XDControlDB.RiskInstance;
Message was edited by:
user500168
Message was edited by:
user500168

Thanks for your reply. After I grant privileges to system, I login as system and try to create the view as below which I get the insufficient privileges error:
CREATE MATERIALIZED VIEW XDControlDB."XDTest1" PCTFREE 10
PCTUSED 0 MAXTRANS 255
STORAGE ( INITIAL 64K NEXT 0K MINEXTENTS 1 MAXEXTENTS
2147483645 PCTINCREASE 0)
TABLESPACE "USERS"
BUILD IMMEDIATE
REFRESH COMPLETE START WITH sysdate NEXT sysdate + 1/24
ENABLE QUERY REWRITE AS
SELECT 1 From XDControlDB.RiskInstance;
As you can see, I try to create the view under a schema called 'XDCONTROLDB'. If I login as sys as sysdba, then it create successfully.
After I create UserA, and grant the privileges I mentioned in the ealier post, I login as UserA, and run the statement above I get the same privileges error. But if I change the stament to below which will create the view under UserA's schema, then it create successfully:
CREATE MATERIALIZED VIEW UserA."XDTest1" PCTFREE 10
PCTUSED 0 MAXTRANS 255
STORAGE ( INITIAL 64K NEXT 0K MINEXTENTS 1 MAXEXTENTS
2147483645 PCTINCREASE 0)
TABLESPACE "USERS"
BUILD IMMEDIATE
REFRESH COMPLETE START WITH sysdate NEXT sysdate + 1/24
ENABLE QUERY REWRITE AS
SELECT 1 From XDControlDB.RiskInstance;
Looking for your suggestions,
Cheers

Error while creating/changing/desplay cost element

Gents
Need urgent help. I am getting a below error while creating/changing/Displaying the cost element.
Table CI_CSKB is not an active table
Message no. AD 228
Kindly help me to get the resolve this issue.
Thanks and Regards
Vinay Thakre

hi
In Cost Elements (Data is Dependent on Controlling Area), please go to extras and check your controlling area while creating the cost element, and make sure if u r creating Primary CE, it has been created as a G/L account and also make sure you use correct CE Category.
Thanks
plz award points if helpful.

Significance of IBase, Component and Product ID while creating Change Reque

Hello,
When we create a change request via SOLMAN_WORK_CENTER, we are supposed to provide values for
1) IBase
2) Component
3) Product ID
Ibase can be defined as the way SAP differentiates in a multiple system (APO, CRM, ECC) environment, the corresponding environment.
The values corresponding to IBase can be obtained via IB51,52 and 53 tcodes.
Can the value for IBase obtained via SMSY t code also?
What does component and Product ID signify?
Where can we get values for Component and Product ID?
Is Product ID the same as value we get from menu Option System->Status->Installation Number
Is it necessary to provide all 3 values (i.e. IBase, Component , Product ID) while creating change request?
If Not, how will SolMan identify which system the change should point to?
Or only value for Ibase is enough?
Thanks,
Vikas

Ibase can be defined as the way SAP differentiates in a multiple system (APO, CRM, ECC) environment, the corresponding environment.
The values corresponding to IBase can be obtained via IB51,52 and 53 tcodes.
Can the value for IBase obtained via SMSY t code also?
No
What does component and Product ID signify?
Product ID is not mandatory. I actually hide it in the CRMD_ORDER screen.
Where can we get values for Component and Product ID?
Is Product ID the same as value we get from menu Option System->Status->Installation Number
Component - IB52 as you already mentioned
Product ID - in a customizing table, I've seen it once but can't remember where honestly. As stated, I don't bother with the field
Is it necessary to provide all 3 values (i.e. IBase, Component , Product ID) while creating change request?
The iBase and component are mandatory, odd thing is if you enter the component without entering 1 in the iBase, SolMan will fill the 1 in for you.
If Not, how will SolMan identify which system the change should point to?
By the logical components assigned to your maintenance project. You can actually have transports for more than one production assigned to your change document. For instance you could have a BI and ECC transport assigned to the sane change document. Your tak list will have the dev, testing and production systems for each logical component assigned.
Or only value for Ibase is enough?
I was having this discussion with someone the other day. Since the logical components assigned to the mianteance project really determines what systems you can create transports for, what is the value of the component field? Best I could determine was when you use the Logon on to System action, it points to the one listed in the component field only. other than that, I'm not sure.

Enhancement/Exit for transportation zone while creating/changing customer

Hi,
I want Enhancement/Exit for chnging transportation zone while creating/changing customer.

HI,
I used inmplicit enhancement .
and change kna1-lzone
but still previous value is store.
no changes made.
even i changed
addr_chg = 'X'.

How to create change set in 9i r2 ?

I created new change source and new change set , not use 'SYNC_SOURCE' and 'SYNC_SET'.
after I created change table and activated change set, I update source table's data.
but I can't find any recored in change table.
please help, thanks.
//create change source
begin
dbms_cdc_publish.create_change_source(
change_source =>'hr_change_source',
source_description=>'Change source for hr test_source',
logfile_suffix => '',
logfile_location => ''
end;
//create change set
begin
dbms_cdc_publish.create_change_set(
set_name => 'hr_change_set',
change_source_name => 'hr_change_source',
begin_date => sysdate,
end_date => sysdate+5,
tablespace_name => 'ts_cdcpub',
ignore_ddl_events => 'y',
rollback_seg_name =>' ');
end;
//create change table
begin
dbms_cdc_publish.create_change_table(
owner => 'cdcpub',
change_table_name => 'hr_ct',
change_set_name => 'hr_change_set',
source_schema => 'hr',
source_table => 'cdc_test',
column_type_list => 'id integer, name varchar2(10)',
capture_values => 'both',
rs_id => 'y',
row_id => 'n',
user_id => 'n',
timestamp => 'n',
object_id => 'n',
source_colmap => 'n',
target_colmap => 'y',
options_string => 'tablespace ts_cdcpub');
end;
//activate change set
begin
dbms_cdc_publish.alter_change_set(
set_name => 'hr_change_set',
advance_enable => 'y',
ignore_ddl_events => 'n',
rollback_seg_name => '');
end;
//source table
create table hr.cdc_test(
id integer,
name varchar2(10),
primary key(id)
);

Dear Niranjan
the WWI design of a cover letter is very "company" specific. In most cases data like:
- which material number was "delivered" is shown e.g. with material text
- some contact adress data from the company shipping the MSDS is shown
etc.
Most of the information printed are retrieved using a parameter symbol. Some data might come from information in CVD1; some data is retrieved by using the data from CVD1; e.g. Customer adress information etc. (here data is retrieved from business partner information)
The parameter symbols you are showing are "standard"; therefore you can use option of Ralph to try to identify the "source" of the data as retrieved.
There are not many threads related to cover letter topic in this FORUM; I believe not more than 10 threads are related to this topic. I participated in discussion of one of these threads; i was not able to find the thread; sorry
Only as a hint: don't only concentrate on WWI design; identify as well how you need to "link" the cover letter to a specific "process"; this is done via customizing; e.g. refer to the SDS distribution OSS in which the whole SDS process is described; the process is described well how to "link" the cover letter to a shipment process
Topic is explained on "very" high level here:
Cover Sheet Template (DBV) - Basic Data and Tools (EHS-BD) - SAP Library
So I believe the best option is to us the proposal of Ralph and trying to understand the standard symbols etc.
C.B.
PS: after oce again trying to find additional threads I found only these:
Coverletter - Output of material data
Parameter Symbols not appearing in Coversheet and/or Acknowledgement Receipt
How to create Cover letter

Insufficient privileges to create the RDF NETWORK

Hi,
I am using user scott to test a rdf database using oracle 11.2.0.2 contained in oracle developer days. I granted resource, create session, create table, and create tablespace to scott. I am able to create a tablespace under scott. I also used the OEM panel to grant many privileges in roles, system privileges and object privileges to scott. However, I am still not able to create the rdf network under scott. The error says insufficient privileges to create the RDF NETWORK. How can I grant a priviledge to scott to create a rdf network? Thanks a lot.
hong

Hi Hong,
Yes. This is the correct order. You must first create the semantic network as a user with DBA privileges. After that, you can create semantic models with a less privileged user.
You can find more information in the Quick Start Section of the user guide:
http://docs.oracle.com/cd/E11882_01/appdev.112/e25609/sdo_rdf_concepts.htm#CHDEDFFA
Hope this helps,
Matt

No popup to select active implementation cycle, while creating change Request

Hi,
I have two active Implementation projects.
While creating change requests, it is not giving any popup to select the specific cycle.
It automatically assigns to newly activated Cycle.
Please advise.
Thanks & Best Regards,
Kiran Sathyan

Hi,
if you would mention about sap solution manager version, this critical landscape transport and design before you state the problem, this would saved much time.
Now I dont think so Popup functions applicable for implentation cycles.
check out http://help.sap.com/saphelp_sm40/helpdata/en/1a/c39742042fc86ae10000000a155106/frameset.htm
and regarding closing the project cycle check this out below informations,
933705 - Closing inconsistent project cycles
Change Request Management scenario: Usual questions and known errors
question 10.
Make sure you closed open tasks, chk in tcode scma
Thanks
Jansi

ORA-01031: insufficient privileges While Trying to Create a Trigger

Hi
I am trying to create a trigger on one of the table in the database schema :
CREATE OR REPLACE TRIGGER Trigger_Name
BEFORE INSERT ON table_name
FOR EACH ROW
---Trigger Body...
However I am getting the following error : ORA-01031: insufficient privileges
I have tried to check the status of the trigger with the following script :
SELECT object_name
FROM dba_objects
WHERE object_type = 'TRIGGER'
AND status = 'INVALID';
and it is showing its status as "INVALID".
Can anybody please suggest me how to proceed on this?

Hi,
If the trigger exists than you have privilieges to create trigger but you need some privilieges needed to compile it.
Check all commands and objects you are referring to inside trigger body. Maybe you are trying select table without proper priviliege...?
Bartek

Insufficient privileges after creating new files

I have a PowerBook G4 that I sometimes start-up off an external Firewire drive. The Internal HD is locked-down admin-wise as it's a company laptop but sometimes I need to run my own apps that aren't on the internal HD (i.e. Photo Rescue, Aperture, etc).
When I work on/create a jpeg image while running Photoshop (start-up and PS running off the external FWHD) I save the image onto the PowerBook internal HD inside the Shared Folder.
Later when I boot-up the laptop via the Internal HD I can open these jpeg files but cannot modify them due to Insufficient privileges. I have to make sure I run iRepair to set to privileges on that particular directory before I shutdown off the FW drive.
Is there some way I can default the Leopard Start-Up on the external FW drive so that when I save a file to the internal HD the privileges are wide open? It's a pain to remember to fix the directories with iRepair before I shutdown. I have run Repair Permissions via the FW drive but that hasn't helped anything.

Create a disk image in the Shared folder using rhe Disk Utility, select the mounted image in the Finder, choose to ignore permissions from the Get Info window under the File menu, and change the permissions on the image file so that all accounts can write to it. Save the JPEGs to the mounted image.
(31781)

4.0 EA2 - Insufficient Privileges When Creating Object With Proxy

When I have connected by proxying to another user, I receive the following message when trying to create a new object:
The database user has insufficient privileges for the given operation.
Steps to reproduce:
Connect by proxying to another user
Right Click on Views
Select New View
I noticed this under EA1, though, not sure if reported. This worked under 3.2.2

Sounds like your management needs a stern lecture on the concept of change management. <g>
I am not debating what you do. I am questioning the logic, or lack thereof, of doing it that way. My recommendation would be to change your procedure to one that:
A. Is more in line with good change management practices.
B. Works.

Insufficient privileges to create database

Hi all,
I am new to oracle and just solved my database login problem by using scott/tiger as username/password. I am just wondering does this login has rights to create database? Since the system/manager combo doesn't work when I login, I have no choice but to use scott/tiger. However, I got this when I try to follow the exercise from the book I am reading on.
SELECT tablespace_name
FROM dba_tablespaces
ORDER BY tablespace_name;
ERROR at line 2:
ORA-00942: table or view does not exist
I was just trying to find out what my Default and Temporary tablespace to create an account. I kept on following the book anyways and I tried this:
SQL> create user student identified by
2 default tablespace users
3 temporary tablespace temp;
create user student identified by learn
ERROR at line 1:
ORA-01031: insufficient privileges
Any idea?

The user scott does not have the privilege you are trying to use. Have you tried to login as SYS password change_on_install (it is the default and should be changed)?
If you are successful, you can then find the information you were looking for and you can create the user STUDENT

Insufficient privileges while creating change set.

Similar Messages

Maybe you are looking for