Error while creating/changing/desplay cost element

Gents
Need urgent help. I am getting a below error while creating/changing/Displaying the cost element.
Table CI_CSKB is not an active table
Message no. AD 228
Kindly help me to get the resolve this issue.
Thanks and Regards
Vinay Thakre

hi
In Cost Elements (Data is Dependent on Controlling Area), please go to extras and check your controlling area while creating the cost element, and make sure if u r creating Primary CE, it has been created as a G/L account and also make sure you use correct CE Category.
Thanks
plz award points if helpful.

Similar Messages

Error while create/change configuration an application

Hi,
while doing the configuration application.
when i am trying to create/change configuration an application.
i am getting following error.
Error:
Service cannot be reached
What has happened?
URL http://os1gvzg.gemsconsult.com:8000/sap/bc/webdynpro/sap/configure_application call was terminated because the corresponding service is not available.
Note
The termination occurred in system RT1 with error code 403 and for the reason Forbidden.
The selected virtual host was 0 .
What can I do?
Please select a valid URL.
If you do not yet have a user ID, contact your system administrator.
ErrorCode:ICF-NF-http-c:000-u:SAPSYS-l:E-i:os1gvzg_RT1_00-v:0-s:403-r:Forbidden
HTTP 403 - Forbidden
Your SAP Internet Communication Framework Team
can anybody help me out.
thanks in advance,
Kiran.

Hi,
please check [documentation|http://help.sap.com/saphelp_nw2004s/helpdata/en/77/3545415ea6f523e10000000a155106/frameset.htm]
grtz,
Koen

Error while creating change request via solman support desk message

I have configured CHARM and my change req. is working for urgent correction, I have tested the entire workflow.
however when i try to create a new change req. via support desk message --> create a change request open
I get following error
An action was terminated due to an exceptional situation.
Message no. SOCM_ACTION_LOG 090
Diagnosis
An exception has been triggered in PPF action processing.
System Response
Action processing has been terminated. The status of the transaction is still incorrect.
Procedure
You cannot execute the action until the cause of the error has been removed.
The error messages will be kept until the transaction is next checked for subsequent analysis.
Procedure for System Administration
If necessary, analyze other messages in the application log for the incorrect transaction. To analyze the termination, you can activate the breakpoints in the checkpoint group socm_exception.
Additional Information:
Exception CX_SOCM_PRECONDITION_VIOLATED occurred (program:
CL_HF_HELPER==================CP, include:
CL_HF_HELPER==================CM00A, line: 29).
pls help

Hi Yunus,
Your probably have changed the transaction type SLFN to a the customer namespace Z or Y. If this is the case you MUST also "Define Mapping Rules for Copy Control".
Goto SPRO -> SAP Solution Manager -> Scenario-Specific Settings -> Change Management -> Change Request Management -> Extended Configuration -> Change Transaction -> Change Transaction Types -> Copy Control for Change Request Management -> Define Mapping Rules for Copy Control.
Once at this point in the IMG make a copy of SLFN -> ZLFN. This will resolve your problem.
Kind regards,
Latief

Error while creating BOM

Hi
iam facing error while creating, changing and display BOM.
Error: Status MHCO of the user interface SAPLCSDI missing.
rgads

Dear,
MHCO - BOM item screen GUI status..Are you using any Alternative item?
Have you applied any new patch in the system?
Contact ABAPer, can give more details
In SAP service place serach for this interface program,,,you will get many notes on this.

Error while creating material cost estimate

Hello All
I am creating material cost estimate of FG whose components are SF & ROH-2. While creating cost estimate system gives an error message which states: :
*No cost element segment exists for 40103110 on 01.09.2009
Message no. CK048
Diagnosis
The consumption account found by automatic account determination for material STD-PRICE-SF does not exist for the date 01.09.2009 specified.
Procedure
Check the cost element segment's validity period
Check cost element
Or, if you have authorization, create a cost element which did not exist previously.
Create primary cost element*
Please provide your valuable inputs regarding this error message. Looking forward to your inputs & feedback.
Regards,
J K Tharwani

Dear Jitendra,
Its Seem primary cost element you mentioned is not defined for 09 period.For this go to KA06,gIve that cost element number and the Valid from date as 01.09.2009 and valid to date as 30.09.2009, press enter it will take u inside the T.C,feed the relevant data and save.
Now again take the costing run.This time system should not throw the error.
Check and Revert back.
Thanks and Regards,
Jitendra DIlip Chauhan.

Getting error while creating the variable of Schema Element type

Hi everybody,
For creating a variable of schema element type I am doing the following steps...
Select 'Variables' after right clicking on bpel process. IN this window, go to 'Create VAriable' then select 'Element' type. Now in Type Choose, I expanded the my imported schema files. And selected a element type, then click ok to create this variable... I am getting the message...
IN ORDER TO SAVE IMPORTED WSDL/SCHEMA FILES, YOU MUST HAVE A PARTNER LINK LOCATED UNDER THE CURRENT PROJECT DIRECTORY.
What is mean by that.
I have imported the schema files in project. AFter that I have imported them into the WSDL also. Now why I am getting error while creating the variable. However I can create variable directly in .BPEL file then everything is fine. And it is working also. But what is mean with the above error? Why I am not able to create variable through GUI?
Thanks.

Hi,
I have this same problem this morning, and I was going crazy, until I found this webpage on the internet:
[http://technology.amis.nl/blog/1803/problem-importing-xml-schema-in-bpel-process|http://technology.amis.nl/blog/1803/problem-importing-xml-schema-in-bpel-process]
The idea is that the jdeveloper is not very good working with directories with spaces on the directory name. If you move all your work to a directory without spaces, it will work smoothly. At least, it had worked for me.
Regards,
Nacho

Error while creating publisher change tables in CDC

Hi,
I am implementing Change Data Capture. I got getting following error while creating publisher change tables in Staging database. My database version is 10.2.0.2.0 .
I appreciate your help.
ERROR at line 1:
ORA-29540: class oracle/CDC/PublishApi does not exist
ORA-06512: at "SYS.DBMS_CDC_PUBLISH", line 611
ORA-06512: at line 2
Thanks,
Venkat.

This problem got fixed when I ran below script!!
@$ORACLE_HOME/rdbms/admin/initcdc.sql;

Error while creating a PO

Hi all,
I have got an error while creating a PO with an Internal Order. I am trying to post this PO against an Internal Order. The error message says that:
User status BUDG is active (ORD 10034). When I click the perform assistant, it says that according to this status, transaction 'Material purchase order' is not allowed.
Can somebody plss help me in this regards, I will assign points.
Thank you,
Sony

What you enter in the Cost element master data is only for defaulting the cost center or order when you use that GL account.
When you see a message transction requires an account assignment, you can enter the relevant cost center for which the cost is incurred.
For your information, If an order has been marked as statistical, you can find it in KO02 change order > Control data. there may be check box saying statistical. If it is not available, then, you can't make it statistical until, you make that field available for change for the order type. Usually orders of a particular type can be made as statistical, by providing a model order to the order type. In the model order you specify that it will be statistical.

Co- Product Error while creating a production order

Hi,
While performing the Co-Products Approtionment at the time of creation of Production order..
we are facing a problem regarding cost apportionment I have crated a Source Structure and the cost element is assigned to that Source Structure but still iam facing this issue
kindly help me out.
the error msg is
Debit with cost element 9460404 cannot be settled.
Message no. KD549
Diagnosis
Costs/revenues exist for cost/revenue element 9460404. This cost/revenue element was given source assignment 40 in the source structure (-> settlement rule for sender -> parameters). However, there is no distribution rule with settlement type FUL for this source assignment or the total of the percentages for the rules is less than 100.
Note:
Full settlement settles all the costs and revenues which have occurred up to the settlement period and have not already been settled. In the case of periodic settlement, you can configure the settlement profile so that all the costs occurring in the settlement period are settled, or if an amount less than 100% can be settled.
Procedure
Maintain the distribution rules for source assignment 40 and settlement type FUL or use periodic settlement to settle less than 100%. Change the settlement profile for the sender as necessary.
Change settlement profile
Note:
Cost and revenue elements receive source assignment " " if you have not entered a source structure in the settlement rule parameters.

Hi Krishna Murthy I went through the note but i couldnt recive a big help from that note.
I will explain the step by step process that i have done.
I am attaching the Screen shots of the issue.
1. For co-products I have created a source structure and Sec. Cost Elements were assigned in the source structure.
2. The source structure was assigned in the Material Master for co-products equally distrubuting the amount between 2 materials.
3. When we are trying to create a production order the error was displayed but the costs was getting calculated properly.
4. When I was settling the production order the same error was getting displayed.
I have tried various methods to resolve it.
1. I have created a periodic settlement rule and tried to settle but it didnt work
2. I have assigned the source structure in the settlement profile this also didnt work.

Error while creating a Development plan template

Hi Gurus,
I am facing errors while creating Development Plan Template.
This is how it goes :
When i click on Define Forms for Talent Assessment --> a wizard pops up & i select Development Plan :
In first step, I am giving Title,Integration with SAP Learning Solution (check) & a rating scale.
Now after clicking next, I am adding 2 development areas :
1) Training
2) Mentoring,
now as soon as I'm clicking on End Configuration, It displays 2 errors & 1 warning message :
error1 : Element Appraisal Template 'XXXXX' contains errors.Cannot change status.
error2 : Value type 000000XXX of value class Q does not exists
Warning 1 : You have maintained a description that is not displayed.
In PHAP_CATALOG, when I'm trying to manually release the Criterion Group (VB) or Appraisal template (VA), it does not allow me to do it.
Kindly let me know how to proceed further.
Regards
bharti

Hi,
Even though it gives the error,the new RTF template is uploaded and it is reflected when I query the template again.
But when I run the Concurent program and see the output,the output still shows me the old template.
Regards
Jujaar

Error while creating AW

Hi
I got following error while creating AW via Wizard.
Preparing
Creating analytic workspace...
Processing cube REFCOST
Processing Creating Dimension : REFPRODUCT
Processing Creating Dimension : REFTIME
Processing Defining Load for Dimension: REFPRODUCT
Processing Refreshing Dimension : REFPRODUCT
Processing Defining Load for Dimension: REFTIME
Processing Refreshing Dimension : REFTIME
Processing Creating Cube : REFCOST
Processing Defining Load for Cube: REFCOST
SqlException = ORA-06510: PL/SQL: unhandled user-defined exception
ORA-06512: at "OLAPSYS.DBMS_AWM_PRV", line 469
ORA-01422: exact fetch returns more than requested number of rows
ORA-06512: at "OLAPSYS.DBMS_AWM_PRV", line 983
ORA-06512: at "OLAPSYS.DBMS_AWM", line 428
ORA-06512: at line 1
Error Code = 6510
Sql State = 65000
All the cubes could not be added to the Analytic Workspace COST;
The following cubes could not be added : COST
java.sql.SQLException: ORA-06510: PL/SQL: unhandled user-defined exception
ORA-06512: at "OLAPSYS.DBMS_AWM_PRV", line 469
ORA-01422: exact fetch returns more than requested number of rows
ORA-06512: at "OLAPSYS.DBMS_AWM_PRV", line 983
ORA-06512: at "OLAPSYS.DBMS_AWM", line 428
ORA-06512: at line 1
Tidying Up
Failed to create the analytic workspace
Can anyone point out why this error is coming?
Hrishi

Did you change any of the text in the lob write statements ?
I believe you get this error if you increase the number of characters without increasing the 1st argument which looks as though it represents the number of characters

G/L account 59500140 cannot be created as a cost element

Hi Viewers,
When I try to do the KO88 Process order settlement i am getting the below error:
G/L account 59500140 cannot be created as a cost element
Message no. KQ119
Diagnosis
When maintaining the posting rules for passing on results analysis data to Financial Accounting, you entered a G/L account that is defined as a primary cost element in cost and revenue element accounting. This is not allowed. You must enter a G/L account in the posting rules that is not defined as a cost element.
System Response
The entry invalid.
Procedure
You have the following options:
Enter a G/L account for which no cost element is specified in Cost and Revenue Element Accounting.
You can change the message type with user-defined error management (transaction OPR4_KKA). What should be observed when you enter a G/L account in a posting rule that is defined as a primary cost element in Cost and Revenue Element Accounting? You need to define a CO account assignment so that the posting defined in the posting rule can be executed. You do this with transaction OKB9 (default account assignment) or OKC9 (substitution), or using the default account assignment in the cost element master.
I would like to know the GL Account 59500140 is a P&L Account. Is it correct?.
Please help me to overcome from this issue.
Thanks & Regards,
Aswin

Execute transaction code FSP0 and check whether the account is a P&L or a Balance Sheet. Nevertheless, you can only enter accounts that are not created as cost elements in customizing transaction OKG8. If you enter an account that is also a cost element, then you need to configure default CO account assignment using OKB9 or a substitution using OKC9. Please refer to the following SAP Notes.
https://service.sap.com/sap/support/notes/581296

Error while creating contract

Hi Experts,
I am getting a strange error,while creating quantity contract in VA41 .
When ever I am trying to save the quantity contract it gives a in completion Log.
So when I am trying to complete the documents it gives a list of incomplete fields,in those fields I see a field called Net value so when I am clicking on the field its taking me "condition" tab and under that to pricing elements .
I have assigned pricing procedure to sales org.
I am not able to understand how to proceed since incomplete doc would not get saved.
Pls help .

This is because the cost pricing for EK01 is missing. In t.code V/08, go to pricing procedure. In the pricing procedure, the pricing condition type is ticked as mandatory, hence you see the details in the imcompletion log. For details on cost using EK01, there are plenty of threads in the forum available. Just search, for example Re: Contion Type Line Items:EK01
Regards,

Want to change the cost element for a activity type (KP26)

Hi,
I want to change the Allocation cost element for an activity type in KP26. I have already changed the cost element in the activity master data in KL02. Now i want to change it in KP26. I am trying to delete the existing line item in KP26 to create the new line item with the new cost element, but system not allowing to delete the existing one. It throws the error message ""Allocations with XXXXXXX/XXXX (Cost center/Activity type) exist ; deletion not possible". Can someone please help me to change the cost element?
Regards
Dev

Hi Rao and Lalit,
Thanx for you people for helping me. i havin gone doubt here. If i am deleting the existing line in KP26 and create new line with appropriage cost element will it be cause the existing datas? I don't want to go for another activity type, because our process is a complex process exist all over the world in more than 300 company codes. So i want to use the existing activity type but want to change the allocation cost element alone. Is there any possibility to change the cost element alone?
Regards,
Dev

Error while creating a task for creating an generic task /app/dac/CustomSQ

Hi ,
I have created a sql file in DAC server /app/dac/CustomSQLs/ ,just to fire an update sql in database
In DAC task tab i have created a task with the following:
Command for incremental load :/app/dac/CustomSQLs/DBNameBeforeLoad.sql
Primary source :flatfileconnection
target source:DBCONNECTION_OLAP
Execution type:SQL FILE
Task phase:GENERAL
I created subject area and assembled ,then created a Execution plan.
When i try to execute this EP ,it shows the following error in DAC log:
ANOMALY INFO::: Error while creating a task for creating an generic task /app/dac/CustomSQLs/DBNameBeforeLoad.sql
MESSAGE:::/app/dac/CustomSQLs/DBNameBeforeLoad.sql - invalide template name!
EXCEPTION CLASS::: com.siebel.analytics.etl.etltask.TaskInitializationException
com.siebel.analytics.etl.etltask.SQLFileTask.doInit(SQLFileTask.java:69)
com.siebel.analytics.etl.etltask.GenericTaskImpl.init(GenericTaskImpl.java:194)
Does my above configuration is correct ..?

verify the following settings:
1. mapping of ECC plant and storage location and logical system number with the appropriate availability group code since this links the stock types in EWM to ECC org elements (SPRO -> EWM -> Interfaces -> ERP Integration -> Goods movement)
2. ensure the availability group configuration is correct (SPRO -> EWM -> GR Process -> Configure availability group for putaway) - check all applicable nodes in this configuration since the availability group code is assigned in the pertinent storage types

Error while creating/changing/desplay cost element

Similar Messages

Maybe you are looking for