Interactive Reports: Display data on two lines per row?

Is it somehow possible to display a single row across two lines in an interactive report?
Something like this:
Row1 Field 1, Row1 Field 2, Row1 Field 3
Row1 Field 4 (spanning across the other fields)
Row2 Field 1, Row2 Field 2, Row2 Field 3
Row2 Field 4 (spanning across the other fields)
Row3 Field 1, Row3 Field 2, Row3 Field 3
Row3 Field 4 (spanning across the other fields)
... etc
For example, I have a "Remarks" column that would look better on its own line, rather than being squeezed into the same row with the other columns.
I realize that this layout might not be possible out-of-the-box, but I was thinking that perhaps some javascript/jQuery trick could be used. Unfortunately, my jQuery-fu is not strong yet, so I'm asking for help...
(I also know that this type of layout is possible using a classic report with a custom template, but I would prefer to use the Interactive Report if at all possible.)
- Morten

Hi,
Try this to page HTML header
<style>
.apexir_WORKSHEET_DATA td{white-space:nowrap!important;}
</style>At least it work with firefox 3.5 for me
Br, Jari

Similar Messages

Displaying data in Two line in ALV report

Hi,
I want to know how to display the data in alv in two lines for Fild name as well as for fild value
like in below case
wa_fieldcata-fieldname = 'WRBTR'.
   wa_fieldcata-seltext_l = 'AMOUNT IN DOCUMENT CURRENCY'.
   wa_fieldcata-outputlen = 18.
   wa_fieldcata-DO_SUM     = 'X'.
   APPEND wa_fieldcata TO it_fieldcat.
   CLEAR wa_fieldcata.
by this on alv COLUMN headig is coming as 'AMOUNT IN DOCUMENT CURRENCY' in one linw i want to display 'AMOUNT IN '   in first line and then 'DOCUMENT CURRENCY' below that
'AMOUNT IN
DOCUMENT CURRENCY' ***
similarly how to display value of three fidls in one column
like for a vendor   I have one column Vandor name in that column i want to display from table LFA1,
NAME1
NAME2
NAME3
NAME4,
in one column only how to do it.
regards,
zafar

Hi,
Ref . early reply can u help me how to uset his in ALV code and can u give some example for this how to display it in two lines as my column heading is of 60 characters 5 word i want to display it in two line in one column only .
How to use : SLIS_EV_AFTER_LINE_OUTPUT
to get this.
or is there any other method.
regards,
zafar

In the report getiing two lines per each service order

Hi Experts,
when I drill down callouts on back reporting level by Component code, Reason code, and action code. I see two lines per service order. I have two records in MP for the same service order. Is there any possibility that I get only one record in report without changing the data at multi provider level?
Example:
Report Output
S. no     Equipment     Calender date Order type       Service order        Action code             Order count
1     30000074     18.02.2009              ysm1           62704142            004/#                      1
                                       004/#                      0
2     30000275     03.08.2009              ysm3      9AHK40218030         004/#                      0
                                      004/20                      1
3     30042305     02.07.2009              ysm4      9AAU70443928        002/70                     0
                                       002/80                     1
Could you please see the below scenarios and suggest.
Scenario 1
For the S. no-1) for the action code 004/# and the order count 1 should displayed in the report and action code 004/# and order count 0 should not be displayed in the report.
Scenario 2
For the S. no-2) for the action code 004/20 and the order count 1 should displayed in the report and action code 004/# and order count 0 should not be displayed in the report.
Scenario 3
For the S. no-3) for the action code 002/70 and the order count 0 should displayed in the report and action code 004/80 and order count 1 also should be displayed in the report.
Regards,
Sita

Hello,
THis can be achieved with foll two ammendments:
1) Restrict Action Code in the filter to exclude # values.
2) Create condition on Order Count to display where it is GT 0.
Regards,
Shashank

Dynamic Table Two lines per data item

Hi experts!!
In my form i have a table with two lines per data item for example the table i want the table to be:
boldheader rowbold
bold1,1 1,2bold
bold1,3 1,4bold
I have also wrapped the table in a subform, and marked the checkbox "Repeat Row for each data item".
Instead i get :
1,1 1,2
2,1 2,2
1,3 1,4
2,3 2,4
How can i display two rows per item ???
Thank you in advance!!!

If there are two lines in a single row for a table (I.e if there are 14 columns, How to be adjusted).
There are two possible ways of doing.
1) a) Create a SubForm
    b) Create a Table (If you create a table there will be Header Row and Body Row)
    c) Delete the Body Row and instead of it create a SubForm with name Body Row
    d) Now you have one Header Row and SubForm as BodyRow.
    e) SubForm BodyRow again create two SubForms with names Row1, Row2.
    f) Now make the SubFormBodyRow as Flow layout and repeat the SubForm(Since if you make this then the child nodes (Row1 & Row2) will inherit the properties of the parent node (SubForm-BodyRow).
   g) Now you can have two rows in one lineitem.
2) The second possible way is showing it in a Dynamic ToolTip.
    Lets say you have a table inside a table then you can show it in a Dynamic ToolTip when you place the cursor in a Student Id you will get Student Data.
Hope it solves.

CRM Interactive Reporting - No data, Random Errors - C41 followed

Hi All,
We have followed like others on the SDN, the Config Guide C41 document for setting up CRM Interactive Reporting.
I have two clients on the same box, one for CRM, the other for Reporting (REP).
I have set up a myself connect and checked the OSS notes relating.
I have ran /CRMBW/CONFIG_WIZARD on CRM and REP and all is green with a couple of warnings;
The unique BI client for system CRD is '260' (logical system 'CRDCLNT260')
Using CRM and BI reporting in the same client is not recommended
I have checked OSS note about myself system and all correct, but this warning still comes up? Is this an issue?
I also get the following;
Source system connection using RFC destination CRDCLNT260 (should be CRDCLNT260_T)
The connection is a Trusted connection following some notes & comments from the above warning. I had also created another RFC for this as CRD_260_T and made this a trusted as the previous, but this gave more warnings.
BI_TCO_ACTIVATION is all green and i have checked every object in the REP client.
After all this, if I run RSA3 in the CRM client and the OLTP transaction data sources bring back 0 records. I have checked the OSS notes around the myself and the authorisations for the Background user and for the admin user and all ok. I have run a trace also and nothing has come up.
I also get errors in the Web UI when i try to run a report. It asks to check BSP_WD_EXCEPTION_DISPLAY in tx SAAB. I have followed the note on setting this up and this provides some error around a method XML_TO_ITAB. The method is active and syntax correctly. Is this a red herring?
Can anyone shed any light on anything that is not in the guide, but is crucial for this to work?
Many thanks Geoff.

Hi Geoff,
firstly, you seem to have done quite well so far if you completed the config wizard successfully. The warning about reportin in the same client being not recommended comes because you apparently also configured the BW client (REP) to be a client for interactive reporting. The wizard is supposed to run in the source client alone, not also in the BW client. But don't worry, it should not do any harm.
The warning Source system connection using RFC destination CRDCLNT260 (should be CRDCLNT260_T) has the same reason: You run the wizard in the BW client, where the BW client is connected to itself via myself connection CDRCLNT260. Just leave it that way and don't change anything.
Technically everything seems to be correctly configured. Now you are wondering why you don't see any data. This can have various reasons. Most likely, your user is not assigned as the person responsible to any sales document. For this to work, your user must be assigned to a business partner, and that business partner must be assigned to a suitable place in the CRM org model either as employee or manager. The employee must be the person responsible to all documents he wants to see in the reports, or a manager of such employees.
The last problem about the Web UI is nothing I can help with. I propose you open another post on that.
Best regards

Different Pricing date for two line items

Hi guru's
How to give different pricing dates for two line items
in a sales order
To elaborate
I have two line items one i need pricing date order date
second one i need pricing date should be delivery date
Thanks in advance
Srinivas

Dear Srinivas,
While creating sales order select the item which you want to change the pricing date then go to menu>GOTO>Item -->Click on Sales A here you can able to change the pricing date as you like.
You can change the pricing date of the item in the sales order through sales order change mode but that sales order should be open.
I hope it will help you,
Regards,
Murali.

ALV report : to display description in two lines.

Hi all,
In a ALV grid display, I want to print description(40 characters) of a field in two lines(20 characters in each).
Please suggest me how to achive the same.
Thanks in advance.

make the description field of 20 char legth in your final internal table.
while passing data to your final internal table, pass all fields along with 20chars from description to one line of final table and in the same loop add another row with all fields blank but the description with rest of the fields..
loop at it_1 into it_s.
is_final-desc = it_s-desc+0(20).
apppend is_fianl to it_final.
clear is_final.
is_fianl-desc = it_1-desc+20(20).
apppend is_fianl to it_final.
clear it_s.
endloop.

Interactive report's data not displaying on the edit form.

I have an interactive report that contains 3 rows. When I click on the edit button next to one of these rows, the edit form displays the data from that row.
But when I click the edit buttons next to the other 2 report rows, I get an error message that states: "ORA-01403: no data found. Error Unable to fetch row."
I do not see why this is happening. The PK of the table involved is "Request Date", so the report's "Link Column" region sends the value "Request Date" to the item P54_Request_Date in the form page.
Any idea why this would work correctly for one of the report rows but not for the other 2?
Clearly, each of the report rows must have a value for the PK, so why would the form not be able to find the same row that the report displays? Is it a problem with the form's "Fetch Row from" process?
Thanks.

Hello:
Your problems are primarily related to in your choice of a 'Date' type as the PK for your table. The Automated Row Fetch (ARF) process uses a SQL statement similar to the one below to retrieve a record from a table select c1, c2, c3 ... from tab where PK_col = :page_item_containing_PK_value . This would work find if the the 'page_item_containing_PK_value' were of the DATE data type. However, all APEX binds are done using varchar2. This means that the 'page_containging_PK_value' needs to have the char representation of the date that matches the default date setting on your database. So the page-item needs to be something like 'DD-MON-YYYY HH24:MI'. In your case the PK item is probably being set to 'DD-MON-YYYY' and therefore the fetch fails.
Now, for the 'issue with the :' in the character representation of the date.The link on the report page uses the standard APEX URL syntax to construct the link
f?p=App:Page:Session:Request:Debug:ClearCache:itemNames:itemValues:PrinterFriendly
As you can see, the ':' acts as the separator that delineates the components that make up the APEX URL. So, having a ':' in the 'itemValues' component will make the APEX engine treat whatever follows the ':' in the value passed as a delimiter as opposed to being part of the value being passed.
Varad

Tabular report, how to split row into two lines per record

Hi, I have a tabular report based on a collection. The collection has 15 fields and appears horizontally across the screen. I would like to have a break after the 5th column so that each row is on two lines instead of one. Is this possible...any information would be helpful.
a shortened query is: and I would like the break to be between c028 and c029.
thanks
Karen
Select apex_item.select_list_from_lov_xl
(28,
c028,
'GEARS',
'style="width:200px;background-color:#FBEC5D; "'
|| 'onchange="f_set_casc_gear(this,f29_'
|| LPAD (seq_id, 4, '0')
|| ')"',
'YES',
'0',
'- Select Gear -',
'f28_' || LPAD (seq_id, 4, '0'),
NULL,
'NO'
) gear_code,
apex_item.select_list_from_query(29,
c029,
'select lma_desc e, lma_code r
from lobster_mgmt_area
where 1 in (select 1 from gears where gear_code = '
||nvl(c028,0)
||' AND (type_code in (''005'') and category_code in (''160'')) OR ('
||nvl(c028,0)
||' in (''130'')) ) order by lma_code ',
'style="width:75px"',
'YES',
'0',
'- Select -',
'f29_' || LPAD (seq_id, 4, '0'),
NULL,
'NO') lma_code,
apex_item.text
(30,
c030,
6,
NULL,
'style="width:50px;background-color:#FBEC5D;"'
) gear_quantity
from collections where collection_name = 'EFFORT_C'

Hello Karen,
>> and each field needs to be updateble ( concatenating two fields does not allow for that).
Did you notice the ‘<br />’ component, as part of the columns concatenations?
The following example is using the same principle – every two updatable column, from the employees table, are sharing the same tabular form row - http://htmldb.oracle.com/pls/otn/f?p=22710:420 . The report query is:
select apex_item.text(10,first_name)||'<br />'||apex_item.text(11,last_name) col01,
apex_item.text(12,phone_number)||'<br />'||apex_item.text(13,email) col02,
apex_item.text(14,salary)||'<br />'||apex_item.text(15,commission) col03
from employeesThe same principle is being used to define custom headings.
Hope this time it will be more clear.
Regards,
Arie.

Print data in two line in the same column

Hi,
In a tabular Report I want to print a column (eg:Description,) in two lines in the same cell.
Since the description is too long. Is it possible in report 6i. Or any other solution for this?
Please reply.

Hello,
For the Description field set the Vertical Elasticity to EXPAND. Then it will adjust automatically based on data.
-Ammad

BI Interactive Reporting and Data Extractor, CRM 7.0

Dear Gurus,
We run CRM 7.0 (CRM) on our system including a BI client (REP). I did setup interactive reporting for Lead Management following the config guide.
All settings in CRM client and REP client are done and no errors are left. Also, the reports were created in the web-ui. My user is flag as "manager" in the organizational modell.
The only issue I see now is that the data extractor in CRM (CRM) does not show any data.
Does anybody have a hint what could be the issue here?
Thanks and Regards,
Stefan

Hi!
Those DS are not meant to be enhanced manually but only by one of the following two ways:
1. Adding custom fields with the Application Enhancement Tool (AET) in the CRM UI.
2. Adding SAP fields with the Interactive Reporting Enhancement Workbench (IREW).
The AET is available since CRM 7.0. Please find more details in the SAP Help Portal:
<http://help.sap.com>
    SAP Business Suite
        SAP Customer Relationship Mgmt.
             SAP EHP1 for CRM 7.0
                 Application Help
                     WebClient UI Framework
                         Application Enhancement Tool
The IREW is available since CRM 7.0 EhP1. More details can be found inside TX CRMD_IREW or in the SAP Help Portal:
<http://help.sap.com>
    SAP Business Suite
        SAP Customer Relationship Mgmt.
             SAP EHP1 for CRM 7.0
                 Application Help
                     SAP Customer Relationship Management
                         Analytics
Best regards

Report error using landscape style, lines per page errors.

Hi
A Custom report(use character units in designer,11 X 8.5, stadard settings...) developed(reports 2.5 on apps 11), which was working fine previously using standard landscape. The report produces exactly 56 lines physically per page.
Now, in applications ,landscape print style is properties changed, number of rows changed from 66 to 57.
Now report gives error:
'M_XXXX_GRPFR' is not fully enclosed by its enclosing object 'Body'. M_XXXX_GRPFR is the outer most frame in my report layout.
(I tried increasing page size, etc, no use, same error)
Now, I don't understand why it is giving error, as, it prints only 56 physical lines per page when I see the output file generated.
Is that landscape is defined as 57 rows, but it is not exactly 57 physical lines? Because when I took out some stuff from report layout, which now produces only 45 physical lines, it is working fine.
But, I have all 57 phyiscal lines in the report that I want it to work, any suggestions?
Thanks
Rathan.
null

Hi,
Try this, i might work for you.
<?for-each:Q1?>
Here, place KIT ITEM Data table
Below that:
<xsl:variable name="no_of_lines_per_page" select="number(30)"/>
<xsl:variable xdofo:ctx="incontext" name="invLines" select=".//Q2"/>
<?for-each:$invLines?><?if:(position()-1) mod $lpp=0?> <xsl:variable name="start" xdofo:ctx="incontext" select="position()"/>
[here KIT COMPONENTS tabel will start]
[In table first cell again start for-each group like below]
<?for-each:$invLines?><?if:position()>=$start and position()<$start+$lpp?> ---this is in table first cell
[in rest of cells, put your columns xml tags]
<?end if?><?end for-each?> - in last cell.
this is end of Q2 table.
After that put a page break
<xsl:if xdofo:ctx="inblock" test="$start+$lpp<=count($invLines)"><xsl:attribute name="break-before">page</xsl:attribute></xsl:if> -- page break outside the Q2 table.
Now close the invlines for-each group
<?end if?><?end for-each?>
Close the Q1 for-each group.
<?end for-each?>

Interactive Report - Display New/Changed Columns

Hi,
when I add or change a column in Interactive Reports, APEX doesn't show me the new column automatically.
Everytime the user log in, he has to go on "Actions" and "Select Columns" manually, otherwise the new/changed column won't be displayed.
How can I do that the column is displayed automatically after login?
I am using APEX 4.0.2.00.07.
Regards,
Marc

Either you, as a Developer, can save the report as Public.
Or an aithorized user can save the report as a General/Shared Report.
Or the user can save the report as a Private one.
Pick the columns you/user wants to see. Then [Action -> Save]

Creating BAM report using data of two database tables. Say "EmployeeTable" and "DepartmentTable

I want to populate data from two database tables into a BAM report. I have created two data objects for the tables and want to create 3rd data object so that it can take the data from the other data objects automatically. Is there any such facility within BAM?

Hi
1. I am not sure if you have option to combine multiple DataObjects like that.
2. For your scenario, on Database side itself, I would recommend Create a VIEW that joins these 2 Tables and pull the required Columns and add required conditions. Verify the VIEW has all the rows expected.
3. Then create DataObject for this View. Once you have DataObject, create the Report.
Thanks
Ravi Jegga

Disk Utility- why two lines per disk?

Can anyone answer me as to why there are two lines for each disk in Disk Utility-one is the hard disk type, and the other is the info?

The first line represents the physical disk; the second (and third, fourth, etc.) line represents the volume or partition. A single physical disk could have multiple volumes, hence the outline-type display in Disk Utility.
bd

Interactive Reports: Display data on two lines per row?

Similar Messages

Maybe you are looking for