Is it too much to ask to make it an option to disable drag-and-drop altogether so I can finally ditch IE and start using your product?

I suppose drag and drop is a fine feature for those who want it but it irritates the crap out of me and it seems like it should be simple enough to add in a button or a check-box to turn it off.

Things to change:
Replace * with ^
Replace new with gcnew
Replace NULL with nullptr
Replace "pExcel->get_Workbooks();" with "pExcel->Workbooks;
That will care of most issues. There are a few arrays that also need fixing, such as "Object^ oArgs[]". For this you have to use "array<Object^>^ oArgs" (without the []). This one appears in 2 places and there's also "System::Object*
oParams[]" which needs to the same treatment.
This should get the code to a compilable state.

Similar Messages

Is it too much to ask from apple, an option for different volumes levels from different apps, including alarm, text, email, basically from every posible app?

Is it too much to ask from apple, an option for different volumes levels from different apps, including alarm, text, email, basically from every posible app?

My daughter has had her Razr for about 9 months now. About two weeks ago she picked up her phone in the morning on her way to school when she noticed two cracks, both starting at the camera lens. One goes completely to the bottom and the other goes sharply to the side. She has never dropped it and me and my husband went over it with a fine tooth comb. We looked under a magnifying glass and could no find any reason for the glass to crack. Not one ding, scratch or bang. Our daughter really takes good care of her stuff, but we still wanted to make sure before we sent it in for repairs. Well we did and we got a reply from Motorola with a picture of the cracks saying this was customer abuse and that it is not covered under warranty. Even though they did not find any physical damage to back it up. Well I e-mailed them back and told them I did a little research and found pages of people having the same problems. Well I did not hear from them until I received a notice from Fed Ex that they were sending the phone back. NOT FIXED!!! I went to look up why and guess what there is no case open any more for the phone. It has been wiped clean. I put in the RMA # it comes back not found, I put in the ID #, the SN# and all comes back not found. Yet a day earlier all the info was there. I know there is a lot more people like me and all of you, but they just don't want to be bothered so they pay to have it fix, just to have it do it again. Unless they have found the problem and only fixing it on a customer pay only set up. I am furious and will not be recommending this phone to anyone. And to think I was considering this phone for my next up grade! NOT!!!!

Is it too much to ask for Apple to explain the content of the Console?

I've asked for definitions of terms for years now ... defintions of console terms and phrases such as the following example, each of which may well relate, in terms of the components and the Consoles ref to their "loading", to the ongoing, sophistcated penentration that manages to deinstall my ESET firewall and screw up desktop components across the board. None of third-party malware products have ever found a "threat" on my system, but the malicious activity continues. '
Unfortunately Apple long ago decided against helping their customers with the UNIX-based Mac, pretending to the world that new OS X Macs were as simple use as System 9 Macs, and just as secure. LOL. What a lie.
Apple exploits its reputation for not documenting its products by continuing to not document their products. Apple also continues to imply in all sorts of ways that a Mac is the most secure platform on the planet, ignoring the fact that its Firewall is a joke because, among other things, its "safest" setting — Block All Incoming Traffic — lets Bonjour traffic in, as if it or its Windows twin ZeroConfig are safe when in truth Bonjour is a massive back door that is almost impossible to shut off.
WHY DOESN'T APPLE DEFINE ITS CONSOLE MESSAGES, ESPECIALLY THOSE REPORTING ON COMPONENTS THAT ARE SUPPOSED TO BE DISABLED, SUCH AS ACTIVE DIRECTORY, WHICH HACKERS LIKE TO USE TO SET UP SHAM DHCP SERVERS?
WHAT DOES THIS MESSAGE MEAN? Plugin "Active Directory", Version "6.5.1", is set to load lazily.
Since I have the bad luck of being targeted, and since I know Active Directory represents a huge security hole unless it is used in a controlled environment (i.e., and office the infrastracture of which is used by IT staff to secure its at-work network), I know I don't want mdsresponder guiding a sham server through a firewall's "maximum security" setting.
SO, I SHOUT THIS QUESTION INTO APPLE'S ECHOING VOID: IS IT TOO MUCH TO ASK FOR A DEFINITION FOR: Is set to load lazily"?
Is there anyone with integrity left at Apple, or did they all leave when Bonjour was introduced?

Hi, as far as I can infer, that term means it's not loading any resources until needed, opposite of this...
-bind_at_load
Sets a bit in the mach header of the resulting binary which tells dyld to bind all symbols when the binary is loaded, rather than lazily.
https://developer.apple.com/library/mac/documentation/Darwin/Reference/ManPages/ man1/ld.1.html
Load resources lazily.
You should never load a resource file until it is actually needed. Prefetching resource files may seem like a way to save time, but this practice actually slows down your app right away. In addition, if you end up not using the resource, loading it wastes memory for no good purpose.
http://developer.apple.com/library/ios/#documentation/iphone/conceptual/iphoneos programmingguide/PerformanceTuning/PerformanceTuning.html
And, higher OS versionsare even worse with Bonjour/mDNSResponder, but might see this...
http://support.apple.com/kb/ht3789

All I want is all my contacts on my phone and the same on my iMac, but no, that's too much to ask, instead I get everything doubled up on the phone and everything doubled up (triple in some cases) on the iMac, why does it do this? and more importantly how

All I want is all my contacts on my phone and the same on my iMac, but no, that's too much to ask, instead I get everything doubled up on the phone and everything doubled up (triple in some cases) on the iMac, why does it do this? and more importantly how can I stop it? Thanks

Look under system preferences on the mac at what is be controlled? Look at Mail, Contacts, Calendars. How many accounts are managing contacts? Just the cloud? the cloud and gmail? or cloud, gmail, yahoo, and exchange? If you have more than one contact account, then you will have different contact lists, if John Smith shows up in more than one of your contact lists, you will have multiple entries.
Pick a contact list that is your master, (I use iCloud), only turn on contact syncing for it. The same for your phone. Spend some time on the iCloud webset (www.icloud.com) and work on your contact list there. Clean it up, remove duplicates, etc...Changes will auto sync back to all your devices. Life gets much simplier.
Just remember, if you sync different contacts lists and a large number of people appear in your different lists, then they will appear as duplicates.

Too much to ask? Windows 8 epub reader + Adobe DRM...

Hello all,
Is it just too much to ask to read an Adobe DRM protected epub document in a nice metro-friendly Windows 8 interface (which Adobe Digital Editions most certainly is not)?
I have spent hours today looking for that little Holy Grail The only Windows applications I could find that would open Adobe DRM epubs (in addition to Adobe Digital Editions, of course) was Neosoar and Copia, neither of which qualify as a nice metro-friendly interface. Don't get me wrong, lots of nice Windows epub readers out there e.g. Freda, Kobo, Calibre but they'll be damned if they're going to interface with Adobe DRM!
I've bought the book; I just want to read it without fighting Adobe DRM at every turn. Any light on the horizon?
David.
...and what about Microsoft Reader? Did they even mean to publish that? My ear wax provides more utility than that app.

Hello all,
Is it just too much to ask to read an Adobe DRM protected epub document in a nice metro-friendly Windows 8 interface (which Adobe Digital Editions most certainly is not)?
I have spent hours today looking for that little Holy Grail The only Windows applications I could find that would open Adobe DRM epubs (in addition to Adobe Digital Editions, of course) was Neosoar and Copia, neither of which qualify as a nice metro-friendly interface. Don't get me wrong, lots of nice Windows epub readers out there e.g. Freda, Kobo, Calibre but they'll be damned if they're going to interface with Adobe DRM!
I've bought the book; I just want to read it without fighting Adobe DRM at every turn. Any light on the horizon?
David.
...and what about Microsoft Reader? Did they even mean to publish that? My ear wax provides more utility than that app.

Would it be too much to ask for Firefox to ignore the "www" when sorting history by site?

Like it says in the topic question. Would it be too much to ask for Firefox to ignore the "www" when sorting history by site? IE ignores the "www", but not Firefox. It's a real pain to have to look in two places rather than one for a site I previously visited.
Other than that my migration to FF has been great.

Hi, as far as I can infer, that term means it's not loading any resources until needed, opposite of this...
-bind_at_load
Sets a bit in the mach header of the resulting binary which tells dyld to bind all symbols when the binary is loaded, rather than lazily.
https://developer.apple.com/library/mac/documentation/Darwin/Reference/ManPages/ man1/ld.1.html
Load resources lazily.
You should never load a resource file until it is actually needed. Prefetching resource files may seem like a way to save time, but this practice actually slows down your app right away. In addition, if you end up not using the resource, loading it wastes memory for no good purpose.
http://developer.apple.com/library/ios/#documentation/iphone/conceptual/iphoneos programmingguide/PerformanceTuning/PerformanceTuning.html
And, higher OS versionsare even worse with Bonjour/mDNSResponder, but might see this...
http://support.apple.com/kb/ht3789

I need to input text from PC to iPad with large font size. Too much to ask?

Works well with PC to PC using just software likge Windows Live Messenger, but not with iPad because I haven't seen a Messenger app for iPad that can display large fonts or has custom font size option. They all use small font size that can't be changed.
I've also tried many VNC apps by writing the text in my PC to notepad and using the VNC to display the large text for iPad. Probelm is VNC's wont work well with 3G.
Is this really too much to ask from iPad?
If some app developer reads this, I'll buy an app for 50$ that has white background and can receive text sent from PC with custom font sizes. Doesn't have to have any other features. Just receive text from PC using the existing IM softwares like Windows Live etc or simple custom software.

I was wondering if you could help me out with my current situation. It seems like it is similar to your previous I/O delima. I think I might have to parse the data, but i dont know how to do that yet. I basically have to put the information from one text file into a database, and it is formatted in one way, and i need to format it a different way that SQL statements can read. Here are 2 entries of about 12,000 that i have in one text file:
1
UI - 4
TI - 117-28
Y2 - -32676
RP - NOT IN FILE
SO - <None Specified> -1 ;():
2
UI - 11721
TI - The mechanism of genetic recombination in Escherichia coli.
MH - mechanism
MH - recombination
MH - Escherichia coli
RP - NOT IN FILE
SO - Cold Spring Harb Symp Quant Biol 1953 ;18():75-93
This is only 2 of the records, You notice that the record number is first, followed by another field ex. (UI), which then the data stored in that field are after the "-"
Thanks for your help

Have been using your products since 1984. Very sorry I upgraded to Mountain Lion. Time consuming AND wiped out 2007 Quicken. I guess it would have been too much trouble to have red flagged this situation ahead of time. Out of business, literally.

Have been using your products since 1984. Very sorry I upgraded to Mountain Lion. Wiped out all my old applications. Out of business until I get this fixxed. Can I go back to previous operating system? Time Machine?

Downgrade Lion/Mountain Lion to Snow Leopard
1. Boot from your Snow Leopard Installer Disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu.
2. After DU loads select your hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Note the SMART status of the drive in DU's status area. If it does not say "Verified" then the drive is failing or has failed and will need replacing. SMART info will not be reported on external drives. Otherwise, click on the Partition tab in the DU main window.
3. Under the Volume Scheme heading set the number of partitions from the drop down menu to one. Set the format type to Mac OS Extended (Journaled.) Click on the Options button, set the partition scheme to GUID then click on the OK button. Click on the Partition button and wait until the process has completed.
4. Quit DU and return to the installer. Install Snow Leopard.
This will erase the whole drive so be sure to backup your files if you don't have a backup already. If you have performed a TM backup using Lion be aware that you cannot restore from that backup in Snow Leopard (see below.) I suggest you make a separate backup using Carbon Copy Cloner 3.4.1.
If you have Snow Leopard Time Machine backups, do a full system restore per #14 in Time Machine - Frequently Asked Questions. If you have subsequent backups from Lion, you can restore newer items selectively, via the "Star Wars" display, per #15 there, but be careful; some Snow Leopard apps may not work with the Lion files.
In the future:
Before upgrading consider:
Don't upgrade if you are in the midst of important work. Wait until you have finished.
If you are having problems with your computer get them sorted out before you upgrade.
Verify that any mission critical software will be compatible with the upgrade.

HT2589 We had an account that was housed on our old computer but it didn't make it onto the new one...how can I get the account balance and start using it?

We had an account that was housed on our old computer but it didn't make it to the new one. How can we find the balance and start using it again?

iTunes accounts are not located on your computer. They are simply tied to a specific AppleID. Just log in to iTunes with the correct AppleID and Password and you will be back in that account.

TS3989 Since I unloaded os7 and started using I cloud, the photos taken are smaller. when you look through the viewer of the I phone, I have lines top and bottom. In short, the pictured I'm now taking are smaller with not as much content. Any one have any

Since I unloaded OS7 and started using I cloud, the photos taken are smaller. The picture doesn't take up the whole viewer of the I phone. Therfe is a line,top and bottom. Any suggestions?

Hi shldr2thewheel,
it has been a while since we have last spoke, I would like to let you know, I am still working on getting used to the switch from windows to a Mac/Apple system. I do have a new question for you, I did purchase In Design CS5.5 through journeyed.com through Cuyahoga Community College of which I attend as a student, is there a way to purchase an online book through iTunes to learn that as well? Also, you know me, the struggling student, I would also, when and if the book can be purchased through the iTunes, would need to know if you do know of a much easier book for struggling students like myself and at a reasonable price as well for the In Design CS5.5 program. Our campus bookstore had closed early, and, so did the colleges library and our local library here where I do live, so, I cannot go to either place to purchase a book or to take out a book, plus cash funds are low at this moment as well but, I do have money left on the iTunes account to use, if it can be used. So, can it be used, the iTunes money, towards finding a low priced online book? I am in great need of assistance as I have a project due for my one course for this Tuesday, September 4, 2012.
Sincerely in need of help once again,
Kim

Is it too much to ask MS for a simple ad-hoc query tool for end users?

Hello
This is a general MS BI topic and not specific to Power Query, but I couldn't find a more suitable general forum for it.
This posting is the result of the frustration I have with MS BI stack, whereby a simple ad-hoc drag and drop query tool to get the data in a table format (preferably from a relational
data source) is missing, something that other big vendors have, such as SAP Business Objects Universe and the associated tools. The deprecated SSRS Report model and SMDL was the closest MS ever got to this functionality (although that had some limitations
too), which unfortunately is dead now in favour of all sort of "Power" tools that basically can’t deliver the same functionality.
The requirement is pretty simple: provide users with a tool that they can drag and drop fields from different entities in a data model without having to worry about entity relationships and
apply necessary filters and get the data out in Excel or CSV, no fancy (or even simple) aggregation or formatting is required, and users should only see the rows they are authorized to see, i.e. row level security (RLS) of data.
Let’s see what we have at our disposal from MS BI:
From the modeling perspective, we have relational models in the database that support RLS with views, but obviously cannot maintain PK-FK relationships in the database model between views. Other
models are .Net Entity Data model Framework model exposed as OData, and SSAS tabular, SSAS PowerPivot, SSAS multidimensional, which you can find a good comparison of their features here:
http://www.sqlchick.com/entries/2012/3/4/decisions-powerpivot-ssas-tabular -or-ssas-multidimensional-m.html
From the tools perspective we have:
Power Query on top of a relational database (SQL Server): Can connect to relational databases easily, generated queries are optimal, detects relationships with entities, but only when entities
are tables and have PK-FK relationships enforced in the database. So can’t detect relationships with views and hence can’t enforce RLS, so this is not an option unless users keep joining entities, which is not a desirable option either.
Power Query on top of an OData: Works well except that queries generated for multiple entity expansion are terrible (look here for more details:
http://social.technet.microsoft.com/Forums/en-US/7a8b8e52-d3a9-42af-bc52-9d5459c00529/odata-multilevel-expand-query-issue?forum=powerquery). In addition all filtering and projections are done at client side, so even if you want 1 row out of 1 million, all
rows are brought over to Excel before filtered. Overall this results in unacceptable performance even for small sized data.
Power Query on top of a tabular model: Doesn’t support that type of data source yet (http://social.technet.microsoft.com/Forums/en-US/ebcccb5e-7058-4046-917d-3d7fcf60cbdc/tabular-model-as-data-source-for-power-query?forum=powerquery).
Even if it did, tabular models don’t support Many-to-Many relationships out of the box and not sure if there are plans to support tabular models in Direct Query mode in Power Query to take care of RLS.
Excel on top of tabular models or multidimensional models: The tabular model should not be in Direct Query mode and you only get to use PivotTable to query the model. PivotTables are not famous
for generating optimal MDX queries, so performance is not going to be acceptable if you are dealing with large dimensions, especially large junk and degenerate dimensions. You can use drilltrough to get details of a measure, but you have to specify the columns
for a drilltrough action upfront, no flexibility for users to select what they want to see.
PowerPivot on top of relational databases: The query designer cannot detect relationships between views, so users have to perform manual joins, not an option.
PowerPivot on top of a multidimensional or tabular model: The query designer doesn’t generate optimal MDX queries by drag and drop. Especially there doesn’t seem to be a way to add related
attributes of a dimension attribute to the query without cross joins which results in poor performance on large dimensions. Other issues found here
http://sqlblog.com/blogs/marco_russo/archive/2010/08/24/using-ssas-2005-2008-as-powerpivot-data-source-query-designer.aspx. In addition the result set has ugly column names and issues with data types, such as interpreting numeric data types as Text, and
there’s no straight forward way of getting the data from PowerPivot directly to Excel. The user either has to do a copy/paste (which doesn’t work on large datasets) or create a pivot table, bring the measure, and drillthrough the measure to get the details
in table format.
PowerPivot with OData: Treats every entity as a separate table to import, not suitable for our use case.
Report Builder and SSRS on top of relational, multidimensional or tabular model: Given the query designer is the same as PowerPivot, it has similar issues. In addition, there are 4 more steps
from designing a query to generating an Excel or CSV output, not an option.
PowerView: Works against tabular and multidimensional models, but there’s no way of exporting data to Excel sheet. Besides the add-in is not available for Excel 2010.
Good old MS-Access: Link to tables and views through ODBC, create relationships between entities and give each user a copy of that Access database to create their queries, and deal with the
nightmares of updates to the model and distribution of new models to the users! Did I mention Access as an option?
So there you go, 10 options, none of which can deal with a seemingly simple use case sufficiently. At the moment, the best among them appears to be option 6 against a heavily optimized OLAP
cube, and perhaps #3 when/if Power Query support for tabular models in direct query mode arrives. Perhaps I am missing something very obvious, and would like someone to enlighten me here.
Thanks
MR

Hi, as far as I can infer, that term means it's not loading any resources until needed, opposite of this...
-bind_at_load
Sets a bit in the mach header of the resulting binary which tells dyld to bind all symbols when the binary is loaded, rather than lazily.
https://developer.apple.com/library/mac/documentation/Darwin/Reference/ManPages/ man1/ld.1.html
Load resources lazily.
You should never load a resource file until it is actually needed. Prefetching resource files may seem like a way to save time, but this practice actually slows down your app right away. In addition, if you end up not using the resource, loading it wastes memory for no good purpose.
http://developer.apple.com/library/ios/#documentation/iphone/conceptual/iphoneos programmingguide/PerformanceTuning/PerformanceTuning.html
And, higher OS versionsare even worse with Bonjour/mDNSResponder, but might see this...
http://support.apple.com/kb/ht3789

The spinning "wheel of death" does NOT go away! I've loaded too much stuff on my computer (including the entire Adobe CS6 software) and I want to delete everything on my macbook pro and start over? How do I clean everything up without buying MacKeeper?

I use my MacBook Pro (Late 2009) for EVERYTHING and I have loaded so many apps, even doubles of some, I think!   My computer is running really SLOW and I think it is because I don't have enough memory.
I just installed the new Adobe CS6 and that was a BIG mistake. The spinnning wheel of death doesn't stop! I wish I could load that program on my computer so I can use it "on the go", but I can't stand the spinning wheel!
I want to clean up my computer and get rid of EVERYTHING on it!!     Then, re-install the factory settings to run Lion. I believe this will make the wheel stop spinning.
However, how do I make sure that all of the extra stuff that is attached to the app, ( including all the cache') is deleted too?   I don't want to have to buy MacKeeper!
I am hoping the computer wizards or the apple team can give me an answer on how to clean up everything and start over. I have saved everything on my desktop mac.

Thank you so much for the help! I had heard bad things about MacKeeper and I don't want to screw up my macbook any more than it already is! I will do as you suggest. Do you believe this is the best solution for the problem I described?
Should I load my Adobe Creative Suite 6 (in the cloud version) on an external hard drive?
I am so tired of this spinning wheel....should I avoid putting the CS6 on my macbook pro altogether?
I have it on my desk top mac, but wanted to be able to take the photo editing with me when I am "out and about". I know I should probably buy the ipad, which would transport much easier, but even the ipad probably doesn't have the capacity to hold all the Adobe CS6 apps, correct?

I made an extra backup on a USB device and now I can't get it back because "the device uses too much power". Why didn't it a few weeks ago and how can I use the device anyway?

because "it uses too much power"
I did'nt get that message a few weeks ago when I used Snow Leopard and now I can't approach the files I saved on the external disk.
Question 1: How do I solve the problem? (Without going back to Snow Leopard)
Q2: Why this parential supervision by Apple?

riks1105 wrote:
because "it uses too much power"
I did'nt get that message a few weeks ago when I used Snow Leopard and now I can't approach the files I saved on the external disk.
Question 1: How do I solve the problem? (Without going back to Snow Leopard)
Q2: Why this parential supervision by Apple?
Get a powered hub
USB is cranky, you're not the first (probably not the last) to have this happen.

When i go on my internet it ask to make changes i say yes my homepage and sceen look funnie and gets big why

my shield is on my firefox ask to make changes when i go onto the internet my sceen changes and gets discolored and big

Hello,
In order to better assist you with your issue please provide us with a screenshot. If you need help to create a screenshot, please see [[How do I create a screenshot of my problem?]]
Once you've done this, attach the saved screenshot file to your forum post by clicking the '''Browse...''' button below the ''Post your reply'' box. This will help us to visualize the problem.
Thank you!

My phone won't let me make a call, I have it activated and also used the 45 dollar plan and it still tells me to enter a phone number...What can I do to get it to work?

If someone can please help me I am a new user to this phone and Verizon. I got to so that I could call my son and mom long distance, but it won't let me make the call. It is activated and has the 45 dollar plan on it. I really want it to work and not be a waste of money.

I'm sorry you're having troubles making calls, cnasam. From the phone, please try dialing *228 [send], option 1 to program. When completed, restart phone. If this doesn't work, please reach out to PrePay directly at 888-294-6804 and select options 4,6,4 for prompt service. Thank you, VanessaS_VZW Follow us on Twitter @VZWSupport If my response answered your question please click the "Correct Answer" button under my response. This ensures others can benefit from our conversation. Thanks in advance for your help with this!!

Is it too much to ask to make it an option to disable drag-and-drop altogether so I can finally ditch IE and start using your product?

Similar Messages

Maybe you are looking for