Issue configuring MAS

Hello all,
I've installed MDW on one of the desktops, with all the pre-requiestes installed before hand.
Now When I try to open an laptop application on MAS, it asks for a username and pwd, with the dsn name. I select
DSN : ars_db
Username : arsadmin
pwd : (blank)
Check whether database server is up and running.
- Verify whether central server is running.
- Check whether the DSN, username and password provided are valid ones.
- Try login again.
- Check your network connection if database is on a remote machine.
But, when I check the connection of the DSN, through Control Panel >Administrative Tools>Data Sources (ODBC)-->ars_db DSN, it connects properly to the MAR.
Can anyone help me in resolving issue.
Regards,
Praveen
Note: Pwd was not changed for arsadmin

Well known Issue in 4.0 (maybe also valid for 5.0):
First check the Log File under mobile\bin\ ARSCentralServer0.log
then:
Two possibilities:
Configuration of ARS DB itself
Open ARSdb -> Table Ars_systable
Check value ServerMachineName if the entry is correct sometimes IP Adress helps
Check the Value for "RemoteSocketPort"-> It's for the LockServer
--> Check in Mobile\bin the File ARSCentralServer.properties if everything is correct -> Own experience deinstall Lock Service and reinstall it on Port 1004 (don't forget to reboot the Machine before you test it)
Andreas

Similar Messages

Error while configuring MAS

Hi,
Here I'm trying to setup a local environment (just for dev and practice) of MSA with MDW, Comm station,MRS.
I've installed MDW on my local machine here and MAR, Comm station on a remote machines.
There is a successful connection of DSN to the MAR.
Now when trying to open the Mobile application in the Application studio i.e.,
1. Open MAS.
2. Open Project
3. Locate to C:\Program Files\SAP\Mobile\Bin.Net\MASProject\MASProject\MASProject.mtproj
while trying to open this, I'm getting an error saying that <b>"COM Object with CSLID is either not valid or not registered"</b>
After that, I got another error <b>"Object reference not set to an instance of an object."</b>
Please guide me in this issue. I feel that I'm missing something here.
If you have any document as how to configure MAS, please send it to [email protected]
Regards,
PG

You need to be administrator (or power user) of the machine running MAS.
I had this problem, and it was solved by getting more windows authorizations. Hope it solved your problem.
Message was edited by:
Projecto SAP

Windows 2012 Nodes - Slow CSV Performance - Need help to resolve my iSCSI issue configuration

I spent weeks going over the forums and the net for any publications and advice on how to optimize iSCSI connections and i'm about to give up. I really need some help in determining if its something i'm not configuring right or maybe its an equipment
issue.
Hardware:
2x Windows 2012 Hosts with 10 Nics (same NIC configuration) in a Failover Cluster sharing a CSV LUN.
3x NICs Teamed for Host/Live Migration (192.168.0.x)
2x NICS teamed for Hyper-V Switch 1 (192.168.0.x)
1x NIC teamed for Hyper-V Switch 2 (192.168.10.x)
4x NICs for iSCSI traffic (192.168.0.x, 192.168.10.x, 192.168.20.x 192.168.30.x)
Jumbo frames and flow control turned on all the NICs on the host. IpV6 disabled. Client for Microsoft Network, File/Printing Sharing Disabled on iSCSI NICs.
MPIO Least Queue selected. Round Robin gives me an error message saying "The parameter is incorrect. The round robin policy attempts to evenly distribute incoming requests to all processing paths. "
Netgear ReadyNas 3200
4x NICs for iSCSI traffic ((192.168.0.x, 192.168.10.x, 192.168.20.x 192.168.30.x)
Network Hardware:
Cisco 2960S managed switch - Flow control on, Spanning Tree on, Jumbo Frames at 9k - this is for the .0 subnet
Netgear unmanaged switch - Flow control on, Jumbo Frames at 9k - this is for .10 subnet
Netgear unmanaged switch - Flow control on, Jumbo Frames at 9k - this is for .20 subnet
Netgear unmanaged switch - Flow control on, Jumbo Frames at 9k - this is for .30 subnet
Host Configuration (things I tried turning on and off):
Autotuning
RSS
Chimney Offload
I have 8 VMs stored in the CSV. When try to load all 8 up at the same time, they bog down.  Each VM loads very slowly and when they eventually come up, most of the important services did not start. I have to load
them up 1 or 2 at a time. Even then the performance is nothing like if they were loading up on the Host itself (VHD stored on the host's hdd). This is what prompted me to add in more iSCSI connections to see if I can improve the VM's
performance.  Even with 4 iSCSI connections, I feel nothing has changed. The VMs still start up slowly and services do not load right. If I distribute the load with 4 VMs on Host 1 and 4 VMs on Host 2, the load up
times do not change.
As a manual test for file copy speed, I moved the cluster resources to Host 1 and copied a VM from the CSV and onto the Host.   The speed would start out around 250megs/sec and then eventually drop down to about 50/60 megs/sec. If I turn
off all iSCSI connections except one, it get the same speed. I can verify from the Windows Performance Tab under Task Manager that all the NICS are distributing traffic evenly, but something is just limiting the flow. Like what I stated on top,
I played around with autotuning, RSS and chimney offload and none of it makes a difference.
The VMs have been converted to VHDx and to fixed size. That did not help.
Is there something I'm not doing right? I am working with Netgear support and they are puzzled as well. The ReadyNas device should easily be able to handle it.
Please help! I pulled my hair out over this for the past two months and I'm about to give up and just ditch clustering all together and just run the VMs off the hosts themselves.
George

A few things...
For starters, I recommend opening a case with Microsoft support. They will be able to dig in and help you...
Turn on the CSV Cache, it will boost your performance
http://blogs.msdn.com/b/clustering/archive/2012/03/22/10286676.aspx
A file copy has no resemblance of the unbuffered I/O a VM does... so don't use that as a comparison, as you are comparing apples to oranges.
Do you see any I/O performance difference between the coordinator node and the non-coordinator nodes? Basically, see which node owns the cluster Physical Disk resource... measure the performance. Then move the Physical Disk resource for the
CSV volume to another node, and repeat the same measure of performance... then compare them.
Your IP addressing seems odd... you show multiple networks on 192.168.0.x and also on 192.168.10.x.   Remember that clustering only recognizes and uses 1 logical interface per IP subnet. I would triple check all your IP schemes...
to ensure they are all different logical networks.
Check you binding order
Make sure you NIC drivers and NIC firmware are updated
Make sure you don't have IPsec enabled, that will significantly impact your network performance
For the iSCSI Software Initiator, when you did your connection... make sure you didn't do a 'Quick Connect'... that will do a wildcard and connect over any network. You want to specify your dedicated iSCSI network
No idea what the performance capabilities of the ReadyNas is... this could all likely be associated with the shared storage.
What speed NIC's are you using?   I hope at least 10 GB...
Hope that helps...
Elden
Hi Elden,
2. CSV is turned on, I have 4GB dedicated from each host to it. With IOmeter running within the VMs, I do see the read speed jumped up 4-5x fold but the write speed stays the same (which according to the doc it should). But even with the read
speed that high, the VMs are not starting up quickly.
4. I do not see any difference with IO with coordinator and non coordinator nodes.
5. I'm not 100% sure what your saying about my IPs. Maybe if I list it out, you can help explain further.
Host 1 - 192.168.0.241 (Host/LM IP), Undefined IP on the 192.168.0.x network (Hyper-V Port 1), Undefined IP on the 192.168.10.x network (Hyper- V port 2), 192.168.0.220 (iSCSI 1), 192.168.10.10 (iSCSI2), 192.168.20.10(iSCSI 3), 192.168.30.10 (iSCSI 4)
The Hyper-V ports are undefined because the VMs themselves have static ips.
0.220 host NIC connects with the .231 NIC of the NAS
10.10 host NIC connects with the 10.100 NIC of the NAS
20.10 host NIC connects with the 20.100 NIC of the NAS
30.10 host NIC connects with the 30.100 NIC of the NAS
Host 2 - 192.168.0.245 (Host/LM IP), Undefined IP on the 192.168.0.x network (Hyper-V Port 1), Undefined IP on the 192.168.10.x network (Hyper- V port 2), 192.168.0.221 (iSCSI 1), 192.168.10.20 (iSCSI2), 192.168.20.20(iSCSI 3), 192.168.30.20 (iSCSI 4)
The Hyper-V ports are undefined because the VMs themselves have static ips.
0.221 host NIC connects with the .231 NIC of the NAS
10.20 host NIC connects with the 10.100 NIC of the NAS
20.20 host NIC connects with the 20.100 NIC of the NAS
30.20 host NIC connects with the 30.100 NIC of the NAS
6. Binding orders are all correct.
7. Nic drivers are all updated. Didn't check the firmware.
8. I do not know about IPSec...let me look into it.
9. I did not do quick connect, each iscsi connection is defined using a specific source ip and specific target ip.
These are all 1gigabit nics, which is the reason why I have so many NICs...otherwise there would be no reason for me to have 4 iscsi connections.

Issues Configure MS SQL 2012 RS (SharePoint Integrated Mode) in SharePoint 2010

Dear All,
Can someone guide how to troubleshoot this error.
Application Server : Slipstreamed Version of SharePoint 2010 SP2 + Window Server 2012 + Configure RS (RS is in SQL Server 2012 SP2) as per -
http://technet.microsoft.com/en-us/library/jj219068.aspx
Web Server : Slipstreamed Version of SharePoint 2010 SP2 + Window Server 2012
Database Server : SQL Server 2012 SP2 + Window Server 2012
After successfully install sharepoint and RS. I have created a Reporting Service Application (name as
Reporting_SA) at Central Admin.
Below is my issues :-
1. Click on "Reporting_SA"
2. Click on System Setting --> getting error
Below are the error that I get from SharePoint Log Files
Name=Request (GET:http://xxxx:xxxx/_admin/ReportServer/ReportingServicesSystemSettings.aspx?ID=6379172a-da8f-4d7e-9847-1b0e9633064b)
Site=/
WcfSendRequest: RemoteAddress: 'http://xxxxx:32843/6379172ada8f4d7e98471b0e9633064b/ReportingWebService.svc' Channel: 'Microsoft.ReportingServices.ServiceContract.IReportServiceManagement' Action: 'http://schemas.microsoft.com/sqlserver/reporting/2011/06/01/ReportServer/Management/GetSystemProperties'
MessageId: 'urn:uuid:0accea23-5b1f-40fa-9412-c8263a601520'
WcfReceiveRequest: LocalAddress: 'http://xxxx.xxx.org:32843/6379172ada8f4d7e98471b0e9633064b/ReportingWebService.svc' Channel: 'System.ServiceModel.Channels.ServiceChannel' Action: 'http://schemas.microsoft.com/sqlserver/reporting/2011/06/01/ReportServer/Management/GetSystemProperties'
MessageId: 'urn:uuid:0accea23-5b1f-40fa-9412-c8263a601520'
Entering monitored scope (ExecuteWcfServerOperation)
Event log source SQL Server Reporting Services Shared Service does not exist
Throwing Microsoft.ReportingServices.Diagnostics.Utilities.EventLogSourceNotFound: , Microsoft.ReportingServices.Diagnostics.Utilities.EventLogSourceNotFound:
The event source "SQL Server Reporting Services Shared Service" does not exist.;
Leaving Monitored Scope (ExecuteWcfServerOperation). Execution Time=1.1902
System.ServiceModel.FaultException: The server was unable to process the request due to an internal error. For more information about the error, either turn on IncludeExceptionDetailInFaults (either from ServiceBehaviorAttribute or from the <serviceDebug>
configuration behavior) on the server in order to send the exception information back to the client, or turn on tracing as per the Microsoft .NET Framework 3.0 SDK documentation and inspect the server trace logs.   Server stack trace:
    at System.ServiceModel.Channels.ServiceChannel.ThrowIfFaultUnderstood(Message reply, MessageFault fault, String action, MessageVersion version, FaultConverter faultConverter)
    at System.ServiceModel.Channels.ServiceChannel.HandleReply(ProxyOperationRuntime operation, ProxyRpc& rpc)
    at System.ServiceModel.Channels.ServiceChannel.Call(String action, Boolean oneway, ProxyOperationRuntime operation, Object[] ins, Object[] outs, TimeSpan timeout)
    at System.ServiceModel.Channels.ServiceChannelProxy.InvokeService(IMethodCallMessage methodCall, ProxyOperationRuntime operation)
    at System.ServiceModel.Channels.ServiceChannelProxy.Invoke(IMessage message)    Exception rethrown at [0]:
    at System.Runtime.Remoting.Proxies.RealProxy.HandleReturnMessage(IMessage reqMsg, IMessage retMsg)
    at System.Runtime.Remoting.Proxies.RealProxy.PrivateInvoke(MessageData& msgData, Int32 type)
    at Microsoft.ReportingServices.ServiceContract.IReportServiceManagement.GetSystemProperties(ICollection`1 properties)
    at Microsoft.ReportingServices.SharePoint.SharedService.ProxyHelper.<>c__DisplayClass9.<GetSystemProperties>b__8(IReportServiceManagement mchannel)
    at Microsoft.ReportingServices.SharePoint.SharedService.ProxyHelper.DoManagementChannelCall(Action`1 caller)
    at Microsoft.ReportingServices.SharePoint.SharedService.ProxyHelper.GetSystemProperties()
    at Microsoft.ReportingServices.SharePoint.SharedService.UI.ReportingServicesSystemSettings.get_SystemProperties()
    at Microsoft.ReportingServices.SharePoint.SharedService.UI.ReportingServicesSystemSettings.LoadSettings()
    at Microsoft.ReportingServices.SharePoint.SharedService.UI.ReportingServicesSystemSettings.OnInit(EventArgs e)
    at System.Web.UI.Control.InitRecursive(Control namingContainer)
    at System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint)
Leaving Monitored Scope (Request (GET:http://xxxx:xxxx/_admin/ReportServer/ReportingServicesSystemSettings.aspx?ID=6379172a-da8f-4d7e-9847-1b0e9633064b)). Execution Time=191.9647
Noted : I have try to re-install the Reporting Services, but stilling getting same error.
Thanks.

Hi StarMoonEarth,
According to your description, when you click on the System Setting, it throws error message says "SQL Server Reporting Services Shared Service does not exist". Right?
In this scenario, you can check if the Reporting Services is started. Follow the steps below:
In SharePoint Central Administration, click Manage Services on Server in the
System Settings group.
Find SQL Server Reporting Services Service and click Start in the Action column.
The status of the Reporting Services service will change from Stopped to
Started. If the Reporting Services service is not in the list, use PowerShell to install the service.
If the Reporting Services shared is still not existing, please use PowerShell cmdlts to install the Reporting Services service. Please refer to the Section 2 in the link you have posted.
If you have any question, please feel free to ask.
Best Regards,
Simon Hou

PI 7.1 Configuration Issue - Configuration wizard -StringIndexOutOfBounds

Hi ,
I have installed the PI 7.1 EHP1 and started configuring it . The Configuration wizard step ( NWA-> Scenarios -> Configuration Wizard --> Initial Configuration (dropdown menu) -> NetWeaver Initial Setup ) is failing , I am getting the following error message . Can you please let me know if you have any thoughts on this issue ?
The initial exception that caused the request to fail, was:
java.lang.StringIndexOutOfBoundsException: String index out of range: 10
    at java.lang.String.charAt(String.java:571)
    at java.util.regex.Matcher.appendReplacement(Matcher.java:704)
    at java.util.regex.Matcher.replaceFirst(Matcher.java:848)
    at java.lang.String.replaceFirst(String.java:2001)
    at com.sap.tc.lm.ctc.metamodel.util.StringUtil.decryptPasswords(StringUtil.java:48)
    ... 83 more
See full exception chain for details.
Failed to process request. Please contact your system administrator.
While processing the current request, an exception occured which could not be handled by the application or the framework.
If the information contained on this page doesn't help you to find and correct the cause of the problem, please contact your system administrator. To facilitate analysis of the problem, keep a copy of this error page. Hint: Most browsers allow to select all content, copy it and then paste it into an empty document (e.g. email or simple text file).
For further information about the Web Dynpro error page, error analysis and a description of well-known error situations, see SAP note 1113811.

hi kris
You can connect to different SLD also. just you need to configure
follow the installation guide for PI7.1
https://websmp105.sap-ag.de/instguidesNWPI71
https://websmp105.sap-ag.de/instguidesnw
regards
sandeep

Goods Issue Configuration - Account 330001 already used in transaction BSX

Dear All Experts,
I am configuring OBYC for Goods Issue scnario. When I am putting Stock account and this error I am getting
Account 330001 already used in transaction BSX
Message no. F4803
Diagnosis
Accounts used in transaction BSX (posting to asset balance sheet account) cannot be used in any other account determination. Account 330001 (chart of accounts 4000) is already being used in transaction BSX.
System Response
You cannot use account 330001 here.
Procedure
Correct your entry.
Assumption : My assumption is, the debiting stock accout at the time of GR is CREDITED while issuing goods for production through MB1A. But getting above error while mapping.
Is there any other logic behind mapping ? I gone through the threads from SDN itself I got some idea about GI. The accounting entries which are posted are like as below :
Consumption Raw Material A/c     Dr
      Inventory Raw Material        Cr
Does this mean while issuing goods we should not use BSX STOCK account in GBB ?   In above entry are these P & L account or Balance sheet account ?
Expert guidance will be vert appreciable !
Regards,
Revati Joshi.

Dear Murali.
Thank you for reply.
Have a look at configuration which I have done.
Rules
Debit / Credit - Not ticked.
General Modification - Ticked
Valuation Modif - Ticked.
Valuation Class - Ticked.
Accounts
Valuation Modifier - 0001
General Modification - VBR
Valuation Class - 3030
Account - 750034 ( Consumption Account) which will be debiting while GI.
1 ) From where system will pick the Stock Account ? 2 ) Is this above configuration correct ?
Regards,
Revati Joshi.

Eclipse+SOA Suite 10.1.3.1 Issues configuring Oracle AS in eclipse

I have searched all the forums and google but could not find much information.
I have installade soa_windows_x86_101310_disk1 and configured SOA Suite 10.1.3.1 whcih works perfectly fine with oracle JDeveloper. Since our developement platform is eclipse and not jDeveloper I am trying to see if I can configure eclipse to work with Oracle AS.
1. Installed eclipse europa and installed WTP for eclipse.
2. Created a j2ee project and trying to deploy on Oracle AS which I have created as part of SOA Suite ( Please see above).
3. Trying to create a server instance from eclipse and deploy my application for testing with in eclipse.
4. Issues:
I have created the server instance with the following:
New>server>define a new server
server's host name:localhost
Server runtime: <drive>:/product/10.1.3.1/oracleas/j2ee/home
for Oracle OC4J Standalone 10.1.3.1
user:oc4jadmin
password: weclome ( tried welcome1 which I have been using for OC4J thru JDeveloper)
ADMIN port =23791 ( default), tried 6003 ( OPMN port which I was using with OC4J thru JDEV), tried RMI port value 12401
HTTP Port:8888
web site: default-web-site
I could create the server instance and start it. Not sure if it is really starting and running.
When I try to deploy my application I am getting the following error:
Buildfile: C:\Dev-Apps\eclipse\plugins\org.eclipse.jst.server.generic.oc4j_1.5.105.v200709061325\buildfiles\oracle.10.1.3.xml
check.skip.ear.deploy:
deploy.j2ee.ear:
package.module.ear:
[jar] Building jar: D:\product\10.1.3.1\oracleas\j2ee\home\applications\myjavautilities.ear
[oracle:deploy] Unable to get a deployment manager.
[oracle:deploy]
[oracle:deploy] This is typically the result of an invalid deployer URI format being supplied, the target server not being in a started state or incorrect authentication details being supplied.
[oracle:deploy]
[oracle:deploy] More information is available by enabling logging -- please see the Oracle Containers for J2EE Configuration and Administration Guide for details.
BUILD FAILED
C:\Dev-Apps\eclipse\plugins\org.eclipse.jst.server.generic.oc4j_1.5.105.v200709061325\buildfiles\oracle.10.1.3.xml:97:
Failed at "Could not get DeploymentManager".
This is typically the result of an invalid deployer URI format being supplied, the target server not being in a started state or incorrect authentication details being supplied.
More information is available by enabling logging -- please see the Oracle Containers for J2EE Configuration and Administration Guide for details.
Total time: 4 seconds
when I try to stop the instance I am encountering the following problems
Error: Could not connect to the remote server. Please check if the server is down or the client is using invalid host, ORMI port or password to connect: Connection refused: connect
Before I give up and proceed with my time tested tomcat server, I would like to check with the folks on this forum to see if they can help.
Thanks in advance

Chandra,
I am having the same problem with the same versions. I don't think I can move to a different AS to solve the problem.
I've searched a number of other threads in and out of Oracle for solutions. There seem to be a lot of different solutions for similar problems, but nothing that really solves this one.
If I find a solution, I'll post back here. I hope you will do the same or if some kind soul has solved it, she/he will post it.
Curtis

Issue Configuring Push Notifications Proxying for OWA for Devices

I have been attempting to configure Push Notifications per http://technet.microsoft.com/library/jj151815.aspx#bkmk_installmodule
When running the second PowerShell script I get the error
"New-MsolServicePrincipalCredential : Invalid value for parameter. Parameter name: Credential.EndDate.
At c:\Users\User\Desktop\script2.ps1:25 char:5
* New-MsolServicePrincipalCredential -AppPrincipalId $p,AppPricipalId -Type a"
I do currently have another Federation Trust configured for this account with our test environment. Might this be causing this error? Any help would be appreciated.

Hi,
As far as I know, the issue can be caused by time difference between local timezone and server timezone. Please firstly check with this point.
Thanks,
Simon Wu
TechNet Community Support

Issue Configuring Workspace in SAP HANA Studio

i want to connect my local SAP HANA Studio and Sap HANA Client to HANA server on CloudShare. However, I cannot find the repository access path in the preferences to configure the HANA regi file.
I have installed both hana studio 73 win 64 bit version and hana client 73 win 64 bit version.And the installation is done successfully and to the correct folder path.
can any one help me regrading this issue.
Regards,
geeta

Thank you Thomas !

Install PeopleTools 8.53 with Linux Issue: Configure Application Server using psadmin

Folks,
Hello. I am installing PeopleTools 8.53 Internet Architecture. Database Server is Oracle Database 11gR1. OS is Oracle Linux 5. I have installed JDK7, WebLogic 10.3.6, Tuxedo 11gR1 and PeopleTools 8.53 successfully into Oracle Linux 5. I have set up PeopleTools 8.53 Database Instance into Oracle Database Server successfully. Data Mover and Application Designer login into the Database Instance successfully. Web Server has been configured successfully.
Now, I confront the issue regarding configuring Application Server as below:
In Windows, I run /PT8.53/appserv/psadmin.exe to create a domain for the PeopleTools Database Instance successfully. But in Linux, the file /PT8.53/appserv/psadmin is light blue color and not executable, I try to run it in the following way:
[user@userlinux appserv]$ ./psadmin
Its output: ./psadmin: error while loading shared libraries: libtrio64.so: cannot open shared object file: No such file or directory
My question is:
Can any folk tell me how to configure Application Server using psadmin in Linux for PeopleTools Internet Architecture ? How to solve the above issue ?
Thanks.

Folks,
Hello. Thanks a lot for replying. I run psadmin in the way below:
[user@userlinux PT8.53]$ . ./psconfig.sh
[user@userlinux appserv]$ export TUXDIR=/home/user/Oracle/Middleware/tuxedo11gR1
[user@userlinux appserv]$ export LD_LIBRARY_PATH=$TUXDIR/lib:$LD_LIBRARY_PATH
[user@userlinux appserv]$ export PATH=$TUXDIR/bin:$PATH
[user@userlinux appserv]$ ./psadmin
For Application Designer login, I use UserId PSADMIN and password PSADMIN, it works successfully.
For Data Mover Bootstrap Mode login, I use UserId MYNAME and password MYNAME, it works successfully.
When configure Application Server, I use UserID PSADMIN and password PSADMIN. But when boot the domain, the current server log file "APPSRV_0919.LOG" indicates that "Database Signon: Could not sign on to database PT853 with user PSADMIN."
Then I use UserId MYNAME and password MYNAME to configure the Application server again. I boot this domain again. Strangely, the log file APPSRV_0919.LOG gets the same error message "Database Signon: Could not sign on to database PT853 with user PSADMIN."
I purge the cache and clean IPC resources of this domain, and boot this domain again but get the same error message as above.
The content of current server log file /home/user/psft/pt/8.53/appserv/PT853/LOGS/APPSRV_0919.LOG is below:
PSADMIN.5732 (0) [2013-09-19T11:01:10.841](0) Begin boot attempt on domain PT853
PSAPPSRV.9537 (0) [2013-09-19T11:01:30.338](0) PeopleTools Release 8.53 (Linux) starting. Tuxedo server is APPSRV(99)/1
PSAPPSRV.9537 (0) [2013-09-19T11:01:30.484](0) Cache Directory being used: /home/user/psft/pt/8.53/appserv/PT853/CACHE/PSAPPSRV_1/
PSAPPSRV.9537 (0) [2013-09-19T11:01:30.539](1) GenMessageBox(200, 0, M): PS General SQL Routines: Missing or invalid version of SQL library libpsora64 (200,0)
PSAPPSRV.9537 (0) [2013-09-19T11:01:30.548](0) Database Options: override_connection_reset: 0
PSAPPSRV.9537 (0) [2013-09-19T11:01:30.550](1) GenMessageBox(0, 0, M): Database Signon: Could not sign on to database PT853 with user PSADMIN.
PSAPPSRV.9537 (0) [2013-09-19T11:01:30.551](0) Server failed to start
PSADMIN.5732 (0) [2013-09-19T11:01:38.906](0) End boot attempt on domain PT853
PSADMIN.10674 (0) [2013-09-19T11:02:20.766](0) Begin boot attempt on domain PT853
PSAPPSRV.11239 (0) [2013-09-19T11:02:34.736](0) PeopleTools Release 8.53 (Linux) starting. Tuxedo server is APPSRV(99)/1
PSAPPSRV.11239 (0) [2013-09-19T11:02:34.823](0) Cache Directory being used: /home/user/psft/pt/8.53/appserv/PT853/CACHE/PSAPPSRV_1/
PSAPPSRV.11239 (0) [2013-09-19T11:02:34.848](1) GenMessageBox(200, 0, M): PS General SQL Routines: Missing or invalid version of SQL library libpsora64 (200,0)
PSAPPSRV.11239 (0) [2013-09-19T11:02:34.854](0) Database Options: override_connection_reset: 0
PSAPPSRV.11239 (0) [2013-09-19T11:02:34.855](1) GenMessageBox(0, 0, M): Database Signon: Could not sign on to database PT853 with user PSADMIN.
PSAPPSRV.11239 (0) [2013-09-19T11:02:34.856](0) Server failed to start
PSADMIN.10674 (0) [2013-09-19T11:02:41.270](0) End boot attempt on domain PT853
PSADMIN.5107 (0) [2013-09-19T11:56:37.435](0) Begin boot attempt on domain PT853
PSAPPSRV.5182 (0) [2013-09-19T11:56:57.842](0) PeopleTools Release 8.53 (Linux) starting. Tuxedo server is APPSRV(99)/1
PSAPPSRV.5182 (0) [2013-09-19T11:56:58.068](0) Cache Directory being used: /home/user/psft/pt/8.53/appserv/PT853/CACHE/PSAPPSRV_1/
PSAPPSRV.5182 (0) [2013-09-19T11:56:58.134](1) GenMessageBox(200, 0, M): PS General SQL Routines: Missing or invalid version of SQL library libpsora64 (200,0)
PSAPPSRV.5182 (0) [2013-09-19T11:56:58.142](0) Database Options: override_connection_reset: 0
PSAPPSRV.5182 (0) [2013-09-19T11:56:58.144](1) GenMessageBox(0, 0, M): Database Signon: Could not sign on to database PT853 with user PSADMIN.
PSAPPSRV.5182 (0) [2013-09-19T11:56:58.145](0) Server failed to start
PSADMIN.5107 (0) [2013-09-19T11:57:05.737](0) End boot attempt on domain PT853
PSADMIN.4966 (0) [2013-09-19T18:55:48.131](0) Begin boot attempt on domain PT853
PSAPPSRV.5009 (0) [2013-09-19T18:56:08.869](0) PeopleTools Release 8.53 (Linux) starting. Tuxedo server is APPSRV(99)/1
PSAPPSRV.5009 (0) [2013-09-19T18:56:09.071](0) Cache Directory being used: /home/user/psft/pt/8.53/appserv/PT853/CACHE/PSAPPSRV_1/
PSAPPSRV.5009 (0) [2013-09-19T18:56:09.130](1) GenMessageBox(200, 0, M): PS General SQL Routines: Missing or invalid version of SQL library libpsora64 (200,0)
PSAPPSRV.5009 (0) [2013-09-19T18:56:09.138](0) Database Options: override_connection_reset: 0
PSAPPSRV.5009 (0) [2013-09-19T18:56:09.140](1) GenMessageBox(0, 0, M): Database Signon: Could not sign on to database PT853 with user PSADMIN.
PSAPPSRV.5009 (0) [2013-09-19T18:56:09.141](0) Server failed to start
PSADMIN.4966 (0) [2013-09-19T18:56:16.253](0) End boot attempt on domain PT853
PSADMIN.4966 (0) [2013-09-19T19:40:11.049](0) Begin boot attempt on domain PT853
PSAPPSRV.6475 (0) [2013-09-19T19:40:26.633](0) PeopleTools Release 8.53 (Linux) starting. Tuxedo server is APPSRV(99)/1
PSAPPSRV.6475 (0) [2013-09-19T19:40:26.731](0) Cache Directory being used: /home/user/psft/pt/8.53/appserv/PT853/CACHE/PSAPPSRV_1/
PSAPPSRV.6475 (0) [2013-09-19T19:40:26.776](1) GenMessageBox(200, 0, M): PS General SQL Routines: Missing or invalid version of SQL library libpsora64 (200,0)
"~/psft/pt/8.53/appserv/PT853/LOGS/APPSRV_0919.LOG" 64L, 7012C
My question are:
1) I have changed UserId from PSADMIN to MYNAME and password from PSADMIN to MYNAME in Application Server configuration, why the log file APPSRV_0919.LOG gets the same error message "Database Signon: Could not sign on to database PT853 with user PSADMIN." ?
2) I purge the cache and clean IPC resources of this domain and reboot this doamin, why the log file APPSRV_0919.LOG gets the same error message "Database Signon: Could not sign on to database PT853 with user PSADMIN." ?
3) How to solve the above issues ?
Thanks.

Issues configuring network-ups-tools with Powerware 5110

Been using Arch for about 24hrs now (It replaced RHEL5 which was running for 18mths) and I'm very impressed. Have found it very good for a new user, the extensive wiki's have been a huge help to get things going. Under RHEL I really needed to do a lot of google searching to get things working but have only had to do it twice for the same build under Arch. I was able to fix the first issue (wTorrent wiki missed install of php-sqlite) and now network-ups-tools.
I had it working 100% under RHEL so its not a device/hardware issue that I can see. But under Arch I keep getting connection lost messages after starting the ups daemon.
System can see a USB device
[root@fiorano ~]# lsusb
Bus 005 Device 002: ID 0592:0002 Powerware Corp. UPS (X-Slot)
[root@fiorano ~]# ls -l /dev/bus/usb/005/002
crw-rw-r-- 1 root nut 189, 513 Jan 3 16:44 /dev/bus/usb/005/002
Config files:
# nut.conf
MODE = standalone
# ups.conf
[myups]
driver = bcmxcp_usb
port = auto
desc = "Powerwave 5110"
# upsd.conf
no changes
# upsd.users
[monmaster]
password = 1
allowfrom = localhost
upsmon master
instcmds = ALL
# upsmon.conf
DEADTIME 15
FINALDELAY 5
HOSTSYNC 15
MINSUPPLIES 1
MONITOR myups@localhost 1 monmaster 1 master
NOCOMMWARNTIME 300
POLLFREQ 5
POLLFREQALERT 5
POWERDOWNFLAG /etc/killpower
RBWARNTIME 43200
SHUTDOWNCMD "/sbin/shutdown -h +0"
# upssched.conf
CMDSCRIPT /usr/local/ups/bin/upssched-cmd
# /etc/udev/rules.d/52-nut-usbups.rules
# various models - bcmxcp_usb
SYSFS{idVendor}=="0592", SYSFS{idProduct}=="0002", MODE="664", GROUP="nut"
I can communicate with the UPS and the process is being performed by the nut user so udev rules file is ok
[root@fiorano ups]# bcmxcp_usb -D -a myups
Network UPS Tools - BCMXCP UPS driver 0.21 (2.4.1)
USB communication subdriver 0.17
debug level is '1'
Shutdown delay longer than battery capacity when Low Battery warning is given. (max 60 seconds)
USER PID %CPU %MEM VSZ RSS TTY STAT START TIME COMMAND
nut 1608 0.0 0.0 1800 788 pts/0 S+ 17:09 0:00 bcmxcp_usb -D -a myups
This time with more debug data....
[root@fiorano ups]# bcmxcp_usb -DDDDD -a myups
Network UPS Tools - BCMXCP UPS driver 0.21 (2.4.1)
USB communication subdriver 0.17
send_to_all: SETINFO driver.parameter.port "auto"
debug level is '5'
send_to_all: SETINFO ups.firmware "Cont:00.50 Inve:01.50"
send_to_all: SETINFO ups.power.nominal "700"
send_to_all: SETINFO output.phases "1"
send_to_all: SETINFO ups.model "POWERWARE UPS 700VA"
Length of meter map: 92
Index Offset Format NUT
0027 0000 51 output.frequency
0028 0004 51 input.frequency
0033 0008 51 battery.voltage
0041 0012 f0 None
0043 0016 f0 battery.charge.low
0047 0020 f0 None
0056 0024 f0 input.voltage
0065 0028 51 output.current
0068 0032 51 output.current.nominal
0078 0036 f0 output.voltage
Length of alarm map: 24
Index Alarm Supported
-001 INVERTER_AC_OVER_VOLTAGE No
-001 INVERTER_AC_UNDER_VOLTAGE No
-001 INVERTER_OVER_OR_UNDER_FREQ No
-001 BYPASS_AC_OVER_VOLTAGE No
-001 BYPASS_AC_UNDER_VOLTAGE No
-001 BYPASS_OVER_OR_UNDER_FREQ No
0000 INPUT_AC_OVER_VOLTAGE Yes
0001 INPUT_AC_UNDER_VOLTAGE Yes
0002 INPUT_UNDER_OR_OVER_FREQ Yes
-001 OUTPUT_OVER_VOLTAGE No
-001 OUTPUT_UNDER_VOLTAGE No
-001 OUTPUT_UNDER_OR_OVER_FREQ No
-001 REMOTE_EMERGENCY_PWR_OFF No
-001 REMOTE_GO_TO_BYPASS No
-001 BUILDING_ALARM_6 No
-001 BUILDING_ALARM_5 No
-001 BUILDING_ALARM_4 No
-001 BUILDING_ALARM_3 No
-001 BUILDING_ALARM_2 No
-001 BUILDING_ALARM_1 No
-001 STATIC_SWITCH_OVER_TEMP No
-001 CHARGER_OVER_TEMP No
-001 CHARGER_LOGIC_PWR_FAIL No
-001 CHARGER_OVER_VOLTAGE_OR_CURRENT No
-001 INVERTER_OVER_TEMP No
0003 OUTPUT_OVERLOAD Yes
-001 RECTIFIER_INPUT_OVER_CURRENT No
-001 INVERTER_OUTPUT_OVER_CURRENT No
-001 DC_LINK_OVER_VOLTAGE No
-001 DC_LINK_UNDER_VOLTAGE No
-001 RECTIFIER_FAILED No
-001 INVERTER_FAULT No
-001 BATTERY_CONNECTOR_FAIL No
-001 BYPASS_BREAKER_FAIL No
-001 CHARGER_FAIL No
-001 RAMP_UP_FAILED No
-001 STATIC_SWITCH_FAILED No
-001 ANALOG_AD_REF_FAIL No
-001 BYPASS_UNCALIBRATED No
-001 RECTIFIER_UNCALIBRATED No
-001 OUTPUT_UNCALIBRATED No
-001 INVERTER_UNCALIBRATED No
-001 DC_VOLT_UNCALIBRATED No
-001 OUTPUT_CURRENT_UNCALIBRATED No
-001 RECTIFIER_CURRENT_UNCALIBRATED No
-001 BATTERY_CURRENT_UNCALIBRATED No
-001 INVERTER_ON_OFF_STAT_FAIL No
-001 BATTERY_CURRENT_LIMIT No
-001 INVERTER_STARTUP_FAIL No
-001 ANALOG_BOARD_AD_STAT_FAIL No
-001 OUTPUT_CURRENT_OVER_100 No
-001 BATTERY_GROUND_FAULT No
-001 WAITING_FOR_CHARGER_SYNC No
-001 NV_RAM_FAIL No
-001 ANALOG_BOARD_AD_TIMEOUT No
0004 SHUTDOWN_IMMINENT Yes
0005 BATTERY_LOW Yes
0006 UTILITY_FAIL Yes
0007 OUTPUT_SHORT_CIRCUIT Yes
0008 UTILITY_NOT_PRESENT Yes
-001 FULL_TIME_CHARGING No
-001 FAST_BYPASS_COMMAND No
-001 AD_ERROR No
-001 INTERNAL_COM_FAIL No
-001 RECTIFIER_SELFTEST_FAIL No
-001 RECTIFIER_EEPROM_FAIL No
-001 RECTIFIER_EPROM_FAIL No
-001 INPUT_LINE_VOLTAGE_LOSS No
-001 BATTERY_DC_OVER_VOLTAGE No
-001 POWER_SUPPLY_OVER_TEMP No
-001 POWER_SUPPLY_FAIL No
-001 POWER_SUPPLY_5V_FAIL No
-001 POWER_SUPPLY_12V_FAIL No
-001 HEATSINK_OVER_TEMP No
-001 HEATSINK_TEMP_SENSOR_FAIL No
-001 RECTIFIER_CURRENT_OVER_125 No
-001 RECTIFIER_FAULT_INTERRUPT_FAIL No
-001 RECTIFIER_POWER_CAPASITOR_FAIL No
-001 INVERTER_PROGRAM_STACK_ERROR No
-001 INVERTER_BOARD_SELFTEST_FAIL No
-001 INVERTER_AD_SELFTEST_FAIL No
-001 INVERTER_RAM_SELFTEST_FAIL No
-001 NV_MEMORY_CHECKSUM_FAIL No
-001 PROGRAM_CHECKSUM_FAIL No
-001 INVERTER_CPU_SELFTEST_FAIL No
-001 NETWORK_NOT_RESPONDING No
-001 FRONT_PANEL_SELFTEST_FAIL No
-001 NODE_EEPROM_VERIFICATION_ERROR No
-001 OUTPUT_AC_OVER_VOLT_TEST_FAIL No
-001 OUTPUT_DC_OVER_VOLTAGE No
-001 INPUT_PHASE_ROTATION_ERROR No
-001 INVERTER_RAMP_UP_TEST_FAILED No
-001 INVERTER_OFF_COMMAND No
-001 INVERTER_ON_COMMAND No
-001 TO_BYPASS_COMMAND No
-001 FROM_BYPASS_COMMAND No
-001 AUTO_MODE_COMMAND No
-001 EMERGENCY_SHUTDOWN_COMMAND No
-001 SETUP_SWITCH_OPEN No
-001 INVERTER_OVER_VOLT_INT No
-001 INVERTER_UNDER_VOLT_INT No
-001 ABSOLUTE_DCOV_ACOV No
-001 PHASE_A_CURRENT_LIMIT No
-001 PHASE_B_CURRENT_LIMIT No
-001 PHASE_C_CURRENT_LIMIT No
-001 BYPASS_NOT_AVAILABLE No
-001 RECTIFIER_BREAKER_OPEN No
-001 BATTERY_CONTACTOR_OPEN No
-001 INVERTER_CONTACTOR_OPEN No
-001 BYPASS_BREAKER_OPEN No
-001 INV_BOARD_ACOV_INT_TEST_FAIL No
-001 INVERTER_OVER_TEMP_TRIP No
-001 INV_BOARD_ACUV_INT_TEST_FAIL No
-001 INVERTER_VOLTAGE_FEEDBACK_ERROR No
-001 DC_UNDER_VOLTAGE_TIMEOUT No
-001 AC_UNDER_VOLTAGE_TIMEOUT No
-001 DC_UNDER_VOLTAGE_WHILE_CHARGE No
-001 INVERTER_VOLTAGE_BIAS_ERROR No
-001 RECTIFIER_PHASE_ROTATION No
-001 BYPASS_PHASER_ROTATION No
-001 SYSTEM_INTERFACE_BOARD_FAIL No
-001 PARALLEL_BOARD_FAIL No
-001 LOST_LOAD_SHARING_PHASE_A No
-001 LOST_LOAD_SHARING_PHASE_B No
-001 LOST_LOAD_SHARING_PHASE_C No
-001 DC_OVER_VOLTAGE_TIMEOUT No
-001 BATTERY_TOTALLY_DISCHARGED No
-001 INVERTER_PHASE_BIAS_ERROR No
-001 INVERTER_VOLTAGE_BIAS_ERROR_2 No
-001 DC_LINK_BLEED_COMPLETE No
-001 LARGE_CHARGER_INPUT_CURRENT No
-001 INV_VOLT_TOO_LOW_FOR_RAMP_LEVEL No
-001 LOSS_OF_REDUNDANCY No
-001 LOSS_OF_SYNC_BUS No
-001 RECTIFIER_BREAKER_SHUNT_TRIP No
-001 LOSS_OF_CHARGER_SYNC No
-001 INVERTER_LOW_LEVEL_TEST_TIMEOUT No
-001 OUTPUT_BREAKER_OPEN No
-001 CONTROL_POWER_ON No
-001 INVERTER_ON No
-001 CHARGER_ON No
-001 BYPASS_ON No
-001 BYPASS_POWER_LOSS No
-001 ON_MANUAL_BYPASS No
-001 BYPASS_MANUAL_TURN_OFF No
-001 INVERTER_BLEEDING_DC_LINK_VOLT No
-001 CPU_ISR_ERROR No
-001 SYSTEM_ISR_RESTART No
-001 PARALLEL_DC No
-001 BATTERY_NEEDS_SERVICE No
-001 BATTERY_CHARGING No
-001 BATTERY_NOT_CHARGED No
-001 DISABLED_BATTERY_TIME No
-001 SERIES_7000_ENABLE No
-001 OTHER_UPS_ON No
-001 PARALLEL_INVERTER No
-001 UPS_IN_PARALLEL No
-001 OUTPUT_BREAKER_REALY_FAIL No
-001 CONTROL_POWER_OFF No
-001 LEVEL_2_OVERLOAD_PHASE_A No
-001 LEVEL_2_OVERLOAD_PHASE_B No
-001 LEVEL_2_OVERLOAD_PHASE_C No
-001 LEVEL_3_OVERLOAD_PHASE_A No
-001 LEVEL_3_OVERLOAD_PHASE_B No
-001 LEVEL_3_OVERLOAD_PHASE_C No
-001 LEVEL_4_OVERLOAD_PHASE_A No
-001 LEVEL_4_OVERLOAD_PHASE_B No
-001 LEVEL_4_OVERLOAD_PHASE_C No
0009 UPS_ON_BATTERY Yes
-001 UPS_ON_BYPASS No
-001 LOAD_DUMPED No
-001 LOAD_ON_INVERTER No
-001 UPS_ON_COMMAND No
-001 UPS_OFF_COMMAND No
-001 LOW_BATTERY_SHUTDOWN No
-001 AUTO_ON_ENABLED No
-001 SOFTWARE_INCOMPABILITY_DETECTED No
-001 INVERTER_TEMP_SENSOR_FAILED No
-001 DC_START_OCCURED No
-001 IN_PARALLEL_OPERATION No
-001 SYNCING_TO_BYPASS No
-001 RAMPING_UPS_UP No
-001 INVERTER_ON_DELAY No
-001 CHARGER_ON_DELAY No
-001 WAITING_FOR_UTIL_INPUT No
-001 CLOSE_BYPASS_BREAKER No
-001 TEMPORARY_BYPASS_OPERATION No
-001 SYNCING_TO_OUTPUT No
-001 BYPASS_FAILURE No
-001 AUTO_OFF_COMMAND_EXECUTED No
-001 AUTO_ON_COMMAND_EXECUTED No
0010 BATTERY_TEST_FAILED Yes
Lengt of Config_block: 64
Length of statistics map: 0
Lengt of command list: 22
Lengt of outlet_block: 0
Lengt of alarm_block: 11
send_to_all: SETINFO output.voltage.nominal "240"
send_to_all: SETINFO ups.serial ""
send_to_all: SETINFO input.voltage.nominal "240"
send_to_all: SETINFO input.frequency.nominal "50"
send_to_all: SETINFO input.frequency.low "45"
send_to_all: SETINFO input.frequency.high "55"
send_to_all: SETINFO input.transfer.boost.high "216"
send_to_all: SETINFO input.transfer.trim.low "260"
Shutdown delay longer than battery capacity when Low Battery warning is given. (max 60 seconds)
send_to_all: SETINFO ups.beeper.status "enabled"
send_to_all: SETINFO input.transfer.low "186"
send_to_all: SETINFO input.transfer.high "280"
send_to_all: SETINFO ambient.temperature.high "1"
send_to_all: ADDCMD shutdown.return
send_to_all: ADDCMD shutdown.stayoff
send_to_all: ADDCMD test.battery.start
send_to_all: SETINFO output.frequency " 49.9"
send_to_all: SETINFO input.frequency " 49.9"
send_to_all: SETINFO battery.voltage " 13.5"
send_to_all: SETINFO battery.charge.low "11"
send_to_all: SETINFO input.voltage "234"
send_to_all: SETINFO output.current " 0.3"
send_to_all: SETINFO output.current.nominal " 1.8"
send_to_all: SETINFO output.voltage "234"
send_to_all: SETINFO ups.load " 16.7"
send_to_all: SETINFO ups.status "OL"
send_to_all: DATAOK
dstate_init: sock /var/state/ups/bcmxcp_usb-myups open on fd 5
send_to_all: SETINFO driver.version "2.4.1"
send_to_all: SETINFO driver.version.internal "0.21"
send_to_all: SETINFO driver.name "bcmxcp_usb"
send_to_all: SETINFO driver.parameter.pollinterval "2"
send_to_all: SETINFO input.voltage "236"
send_to_all: SETINFO output.voltage "236"
send_to_all: SETINFO battery.voltage " 13.7"
send_to_all: SETINFO input.voltage "234"
send_to_all: SETINFO output.voltage "234"
send_to_all: SETINFO input.voltage "236"
send_to_all: SETINFO output.voltage "236"
^CSignal 2: exiting
But starting the daemon and things fail...
:: Starting UPSd Daemon [DONE]
[root@fiorano ups]#
Broadcast message from nut (Sun Jan 3 17:24:55 2010):
Communications with UPS myups@localhost lost
Broadcast message from nut (Sun Jan 3 17:25:00 2010):
UPS myups@localhost is unavailable
Here are my daemon and message logs, showing a comms issue with the UPS but I am using the exact same settings as my previous OS build?
[root@fiorano ~]# tail -f /var/log/messages.log
Jan 3 17:24:55 fiorano bcmxcp_usb[1730]: Startup successful
Jan 3 17:24:55 fiorano upsd[1731]: listening on 127.0.0.1 port 3493
Jan 3 17:24:55 fiorano upsmon[1735]: Startup successful
Jan 3 17:24:55 fiorano upsmon[1737]: Communications with UPS myups@localhost lost
Jan 3 17:24:55 fiorano wall[1739]: wall: user nut broadcasted 1 lines (46 chars)
Jan 3 17:25:00 fiorano upsmon[1737]: UPS myups@localhost is unavailable
Jan 3 17:25:00 fiorano wall[1742]: wall: user nut broadcasted 1 lines (36 chars)
[root@fiorano ~]# tail -f /var/log/daemon.log
Jan 3 17:24:55 fiorano bcmxcp_usb[1730]: Startup successful
Jan 3 17:24:55 fiorano upsd[1731]: listening on 127.0.0.1 port 3493
Jan 3 17:24:55 fiorano upsd[1731]: not listening on ::1 port 3493
Jan 3 17:24:55 fiorano upsmon[1735]: Startup successful
Jan 3 17:24:55 fiorano upsmon[1737]: UPS [myups@localhost]: connect failed: Connection failure: Connection refused
Jan 3 17:24:55 fiorano upsmon[1737]: Communications with UPS myups@localhost lost
Jan 3 17:25:00 fiorano upsmon[1737]: UPS [myups@localhost]: connect failed: Connection failure: Connection refused
Jan 3 17:25:00 fiorano upsmon[1737]: UPS myups@localhost is unavailable
Jan 3 17:25:05 fiorano upsmon[1737]: UPS [myups@localhost]: connect failed: Connection failure: Connection refused
Jan 3 17:25:10 fiorano upsmon[1737]: UPS [myups@localhost]: connect failed: Connection failure: Connection refused
Jan 3 17:25:15 fiorano upsmon[1737]: UPS [myups@localhost]: connect failed: Connection failure: Connection refused
Hopefully someone can point me in the right direction to get this fixed. I did not install any packages manually, everything has been done via pacman (system is fully up to date as per the time of this post.)

R00KIE wrote:I think you should make it 775
Didn't help.
R00KIE wrote:Can you post the script you call in /etc/rc.d to start/stop/restart the service? Maybe someone can spot a problem there.
Sure, it was put there by the package retrieved from the default repo by pacman as was everything else. All I did was modify a few files in /etc/ups so all user/permissions etc should be setup correctly by the package?
[root@fiorano ~]# less /etc/rc.d/upsd
#!/bin/bash
. /etc/rc.conf
. /etc/rc.d/functions
PID=`pidof -o %PPID /usr/sbin/upsd`
case "$1" in
start)
stat_busy "Starting UPSd Daemon"
/usr/bin/upsdrvctl start &> /dev/null
[ -z "$PID" ] && /usr/sbin/upsd &>/dev/null
/usr/sbin/upsmon &>/dev/null
if [ $? -gt 0 ]; then
stat_fail
else
add_daemon upsd
stat_done
fi
stop)
stat_busy "Stopping UPSd Daemon"
/usr/bin/upsdrvctl stop &> /dev/null
/usr/sbin/upsmon -c stop &> /dev/null
[ ! -z "$PID" ] && kill $PID &> /dev/null
if [ $? -gt 0 ]; then
stat_fail
else
rm_daemon upsd
stat_done
fi
restart)
$0 stop
sleep 3
$0 start
echo "usage: $0 {start|stop|restart}"
esac
exit 0
R00KIE wrote:Maybe someone more experienced in debugging these kind of problems can help, I'm all out of ideas now.
Hopefully someone else stops by, but really appreciate your help. I'm sure its something small that I'm overlooking!
R00KIE wrote:forget about your config files for a moment and try something different and check if it works
Things is, NUT is fairly simple to begin with, there is really only 3 items you need to get it to work that I can see. The UPS driver, upsd user and monitor line.

CCMS - issue configuring new IDoc monitor template

Hi,
we wan´t to create a new CCMS IDoc monitortemplate in our central ALE configuration system and define all relevant remote SAP System and transport the complete template to the Solution Manager System.
We wan´t to customize the template in the ALE configuration System, "not" in SolMan.
These are the steps i´ve already done.
1. create new MTE´s by transaction BDMONIC2
2. customize the new MTE´s by tr. BDMONIC
3. create a new Template in RZ20
4. create a new Monitor for the new TEMPLATE in RZ20
5. after some minutes (the new created MTE´s are available for configuration)
First question. Why i have to wait some minutes to see the new MTE´s in the new monitor ?
anyway,
the monitortemplate for my own system(template creation system) is working fine.
6. Now i´ve created new entries to monitor remote SAP Systems in RZ21
7. I can see the new SAP Systems in my new TEMPLATE in RZ20
8. I would like to use my created MTE´s for every SAP System. Transport all MTE´s and configuration to the relevant SAP Systems.
9. I can see all entries in BDMONIC2 and BDMONIC in the remote System ...
... but I can´t see the new MTE´s in RZ20 in the remote System and
I can´t see the the new MTE´s (for the remote system) in my new TEMPLATE in the ALE configuration System (where the remote system is assigned).
note: I saw that a new MTE creates a new alert class in RZ21.
This class is filled in the template creation system(ALE configuration) but not in the remote system.
Any ideas what is going wrong here ?
thx,
Gordon
Edited by: Gordon Breuer on Jul 30, 2009 2:28 PM

Hi,
check this links:
http://help.sap.com/saphelp_nw04s/helpdata/en/9d/df1241c738f423e10000000a155106/frameset.htm
https://www.sdn.sap.com/irj/sdn/forums
Regards,
Spandan

Issue configuring ASM

I am trying to create a new Single instance test database (10.2.0.4 on Linux RHEL4) with ASM storage and but I am unable to get any disk listing on the 'Configure Automatic Storage Management' screen. But when I execute
$ /etc/init.d/oracleasm listdisks
ASMDSK1
ASMDSK2
ASMDSK3
ASMDSK4
ASMDSK5
ASMDSK6
Also, when I queried the disks, I didn't get any errors.
$ /etc/init.d/oracleasm querydisk ASMDSK1
Disk "ASMDSK1" is a valid ASM disk on device [8, 17]
There is no error log or any information regarding ASM in the install log file.
What am I missing out where am I going wrong?
Thanks in advance,
Arindam

please check permission files at /dev/oracleasm/disks/
Example:
# ls -l /dev/oracleasm/disks/
total 0
brw-rw---- 1 oracle dba 7, 1 Dec 11 10:09 VOL1
brw-rw---- 1 oracle dba 7, 2 Dec 11 10:09 VOL2
brw-rw---- 1 oracle dba 7, 3 Dec 11 10:09 VOL3
what use did you start ASM instance "oracle"?
if you use "oracle", you should have "oracle" permission at files in /dev/oracleasm/disks/ PATH
if permission on files don't match with user start ASM instance... you should modified configure ASMLIB
- Stop ASM instance
- Reconfigure ASMLIB
$ su - root
# # /etc/init.d/oracleasm configure
Configuring the Oracle ASM library driver.
This will configure the on-boot properties of the Oracle ASM library
driver. The following questions will determine whether the driver is
loaded on boot and what permissions it will have. The current values
will be shown in brackets ('[]'). Hitting <ENTER> without typing an
answer will keep that current value. Ctrl-C will abort.
Default user to own the driver interface []: oracle
Default group to own the driver interface []: dba
- check
# /etc/init.d/oracleasm listdisks
- start Oracle ASM
$ id
uid=500(oracle)
$ export ORALCE_SID=+ASM
$ sqlplus / as sysdba
SQL> startup
SQL> select * from v$asm_disk;
Or... use "dbca"

Issues configuring broadcom wl driver with netctl and wpa_supplicant

After quite some hurdle, I managed to get the wireless working with a Broadcom 4322 with the wl driver working. But there are two minor issues which I'd like to ask the more experienced audience:
With netctl, I need to manually interact with wpa_supplicant. This was not needed for the same setup on a different machine with a different driver. I'm fine with that, but when it comes to directing the wpa config to netctl, I had to make the config available as /etc/wpa_supplicant.conf because this is the default for netctl. But according to the man page for netctl, netctl offers the option to specify WPAConfigFile, which should be enabled when Security is set to wpa-config. So, I'd like to have the following config:
/etc/netctl/myWirelessSetup:
Interface=eth0
Connection=wireless
Security=wpa-config
IP=dhcp
ESSID=
Key=
WPAConfigFile=/etc/wpa_supplicant/myWPASupplicantSetup
The reason I did it this way is because I ran into a dependency issue with netcfg when not having a wpa_supplicant config file.
The other issue I have with the broadcom wl driver is that it forces the naming of the wireless device to be eth0, which I don't like. I tried to set it according to the Network wiki, but on boot udev reported a busy device, so I gave up on that.
I'd appreciate if anybody can point me on what I'm doing wrong.

yeah, I know it seems odd, but when you install broadcom-wl, it sets the interface to eth0. You'll find it in the wiki. I also know it's eth0 because that's the interface I use to connect to wifi at home.

Issue configuring DAD on HTTP Server within 10g App Server

This time with a sensible subject...
I am trying to configure the HTTP Server within 10g Application Server with a DAD pointing to an instance hosted on the same server. However whenever I apply the DAD settings and re-start the server I am told the DAD is down. I have tried many permutations of the connection string all without success. Has anyone else encountered a similar problem and can suggest a resolution. I am carrying out the same steps as I would for a 9i HTTP Server and can only think it is a difference for 10g App Server.

Reviewing the mod_plsql services page, it says 'Module Loaded No'. I have reviewed the httpd.conf and oracle_apache_conf files and both suggest that mod_plsql should be started but this is obviously not the case.

Issue configuring MAS

Similar Messages

Maybe you are looking for