Issue using one 2 Fact tables with one dimension Table.

Hi,
I have 1 Dimension table X and 2 Fact tables A and B
X is joined to Both A and B for Loan Amount ( with A) and for colleatral amount (with B) when I am selecting the X.Product_Name, A.Loan_Amt, B.Collateral Amount, it is giving an error message
State: HY000. Code: 10058. [NQODBC] [SQL_STATE: HY000] [nQSError: 10058] A general error has occurred. [nQSError: 15018] Incorrectly defined logical table source (for fact table EIP Collateral FACT) does not contain mapping for [EIP Reporting FACT.PD ID]. (HY000)
Any clues???
Is there a Inner or Outer join which needs to be created or set in the RPD to get the desired results???

Ok..
I have one table which is Porfolio Details which has Portfolio name, Product Category , Product Name, Product ID, Product sources code.- This is my Dimension table.
I have another 2 set of fact tables : EIP Reporting FACT and EIP Collateral FACT..
These two tables are joined to Portfolio Details table.
EIP Reprting FACT gives portfolio wise Loan Amount
and EIP Collateral FACT gives Portfolio wise Collateral Amount details for same set of customer..
Now, I am selecting Portfolio Name, Product Category, Product Name,SUM( EIP Reporting FACT.LOAN_AMOUNT), SUM(EIP Collaetral FACT.Collateral_Amt) in a report
Now, on selecting these columns I am getting that error message which is related to mapping.
If I take any column from Portfolio details table and any column from EIP Reporting FACT- It works.
If I take any column from Portfolio details table and any column from EIP Colletral FACT- It works.
But if I take any column from portfolio table and columns from both FACT tables it gives mapping error...
Hope I am able to explain the issue in a better way now..
Edited by: help-required on Mar 11, 2010 6:53 PM
Edited by: help-required on Mar 11, 2010 6:53 PM

Similar Messages

Join fact table with higher dimension level

how do i join fact tables with higher dimension levels with discoverer?
fact with detail at level C
measure X
dimension with
D->C->B->A
E->C
level
A B C
1------1------1
2------2------1
3------2------1
join between fact X and dimension level C
X=3*C because of sum(X) in discoverer and 3xC in dimension
is there a way to get correct values for X without creating a dimension like
D->C
E->

another way of asking this is whether you can create a summary table in Discoverer at a higher level than a dimension's fundamental grain. In other words - the summary examples in the documentation all describe leaving out one or more of your dimensions... they are either left in or completely taken out. But, some of the most effective summarization occurs when you summarize daily data to a monthly level. Assuming that I have a sales table (at a daily level, and a key value sales_date), and a table date_dim (primary key sales_date), I would like to create a summary sales_month_summary where the sales are grouped on month_year (which is a field in the sales_date table).
How is this done? I suspect that we can't use the date_dim table with the summary (due to the problems noted by the poster above). Do we have to create another table "month_dim"? Do we have to fold all of the desired date attributes (month, quarter, year) into the summary? Obviously we'd like to re-use all of the pertinent already existing date items (quarter, month, year, etc.), not recreate them over again, which would result in essentially two sets of items in the EUL. [One used for this month summary, and another used for the detail.]
I searched the forum - someone asked this same question back in 2000 - there was no answer provided.
The only other thought I have is to "snowflake" the date_dim into two tables and two folders, one at a date level, another at the month level. Then the detail tables can connect to date_dim (which is linked to month_dim), while the summary data can connect directly to month_dim.

Convert a table with one column to panelList with outputText

Hi,
I have a table with one column, I would like to change it to use panelList to present it instead. What will be the syntax for panelList?
<af:table value="#{bindings.ItasUiRuleParamsVO2.collectionModel}"
var="row"
rows="#{bindings.ItasUiRuleParamsVO2.rangeSize}"
emptyText="#{bindings.ItasUiRuleParamsVO2.viewable ? 'No data to display.' : 'Access Denied.'}"
fetchSize="#{bindings.ItasUiRuleParamsVO2.rangeSize}"
rowBandingInterval="0"
selectedRowKeys="#{bindings.ItasUiRuleParamsVO2.collectionModel.selectedRow}"
selectionListener="#{bindings.ItasUiRuleParamsVO2.collectionModel.makeCurrent}"
rowSelection="single" id="t2"
partialTriggers="::t1">
<af:column sortProperty="RuleName" sortable="true"
headerText="#{bindings.ItasUiRuleParamsVO2.hints.RuleName.label}"
id="c11">
<af:outputText value="#{row.RuleName}"
id="ot11"/>
</af:column>
</af:table>
I tried this:
<af:panelList id="pl1">
<af:forEach items="#{bindings.ItasUiRuleParamsVO2.collectionModel}">
<af:outputText value="#{item.RuleName}" id="ot14"/>
</af:forEach>
</af:panelList>
but the error say:
javax.servlet.jsp.JspException: "items" must point to a List or array
at org.apache.myfaces.trinidadinternal.taglib.ForEachTag.doStartTag(ForEachTag.java:136)
Any ideas?
Thanks
-Mina

<af:forEach items="#{bindings.ItasUiRuleParamsVO2.collectionModel}" var="row">
<af:outputText value="#{row.RuleName}" />
</af:forEach>
and make sure the table binding is still in place in your pagedef (or binding tab)

How can I treat many tables with one handler(?) ?

Hello~
I am applying BDB to my embbeded system not rich in resource.
Some *.db files are called frequently.
But, Opening a *.db file [db_create(&dbp, NULL, 0) AND dbp->open] takes a long time in BDB
So, I loaded this functions onto a booting module to call opening functions just one time.
And all D/B handlers(?) are loaded in all run time
But, a D/B handler takes about 360Kbytes. And there are too many *.db files(10) where a table is
How can I treat many tables with one handler(?) ?
Or
If you have the most efficient way to call openning functions just one time, please tell me
Thank you

Hello,
Opening the database handles is expensive due to
opening a file on disk. Is it possible for the application
to use in-memory dbs? Otherwise is there a way for the application
to cache the DB handles and reduce the overhead associated with
opening and closing them?
Thank you,
Sandra

How to create editable table with one empty row ?

I'm looking for solution how to create editable table with one empty row using ADF BC. I have seen this solution in application that was created in JHeadstart and it's very well idea to use it insead of creation form.

hammm, i do it this:
drop the VO on the page, select Table->ADF Table....
so, drop the botton create, from de VO->operations->create (the firts), and right botton (mouse) Edit binding....
in Data collection select the VO, in Select an action select CreateInsert
luck

Can i use two apple tvs with one itunes account?

can i use two apple tvs with one itunes account?

yes and you can use more then 2
just don't give them the same name

Can I use 30 APPLE TV with one Itunes in my computer?

Can I use 30 APPLE TV with one Itunes in my computer?

Welcome to the Apple Community.
That depends on how you intend to use them.

Resolving loops in a star schema with 5 fact tables and 6 dimension tables

Hello
I have a star schema, ie 5 FACT tables and 7 dimension tables, All fact tables share the same dimension tables, some FACT tables share 3 dimesnsions, while other share 5 dimensions.
I did adopt the best practices, and as recommended in the book, I tried to resolve them using Context, as it is the recommended option to Alias in a star schema setting. The contexts are resolved, but I still have loops. I also cleared the Multiple SQL Statement for each context option, but no luck. I need to get this resoved ASAP

Hi Patil,
It is not clear what exactly is the problem. As a starting point you could set the context up so that it only covers the joins from fact to dimension.
Fact A, joins Dim 1, Dim 2, Dim 3, and Dim 4
Fact B, joins Dim 1, Dim 2, Dim 3, Dim 4 and Dim 5
Fact C, joins Dim 1, Dim 2, Dim 3, Dim 4 and Dim 6
Fact D, joins Dim 1, Dim 2, Dim 3, Dim 4 and Dim 7
Fact E, joins Dim 1, Dim 2, Dim 4 and Dim 6
If each of these are contexts are done and just cover the joins from fact to dim then you should be not get loops.
If you could lay out your joins like above then it may be possible to specify the contexts/aliases that should work.
Regards
Alan

Deadlock when updating different rows on a single table with one clustered index

Deadlock when updating different rows on a single table with one clustered index. Can anyone explain why?
<event name="xml_deadlock_report" package="sqlserver" timestamp="2014-07-30T06:12:17.839Z">
<data name="xml_report">
<value>
<deadlock>
<victim-list>
<victimProcess id="process1209f498" />
</victim-list>
<process-list>
<process id="process1209f498" taskpriority="0" logused="1260" waitresource="KEY: 8:72057654588604416 (8ceb12026762)" waittime="1396" ownerId="1145783115" transactionname="implicit_transaction"
lasttranstarted="2014-07-30T02:12:16.430" XDES="0x3a2daa538" lockMode="X" schedulerid="46" kpid="7868" status="suspended" spid="262" sbid="0" ecid="0" priority="0"
trancount="2" lastbatchstarted="2014-07-30T02:12:16.440" lastbatchcompleted="2014-07-30T02:12:16.437" lastattention="1900-01-01T00:00:00.437" clientapp="Internet Information Services" hostname="CHTWEB-CH2-11P"
hostpid="12776" loginname="chatuser" isolationlevel="read uncommitted (1)" xactid="1145783115" currentdb="8" lockTimeout="4294967295" clientoption1="671088672" clientoption2="128058">
<inputbuf>
UPDATE analyst_monitor SET cam_status = N'4', cam_event_data = N'sales1', cam_event_time = current_timestamp , cam_modified_time = current_timestamp , cam_room = '' WHERE cam_analyst_name=N'ABCD' AND cam_window= 2 </inputbuf>
</process>
<process id="process9cba188" taskpriority="0" logused="2084" waitresource="KEY: 8:72057654588604416 (2280b457674a)" waittime="1397" ownerId="1145783104" transactionname="implicit_transaction"
lasttranstarted="2014-07-30T02:12:16.427" XDES="0x909616d28" lockMode="X" schedulerid="23" kpid="8704" status="suspended" spid="155" sbid="0" ecid="0" priority="0"
trancount="2" lastbatchstarted="2014-07-30T02:12:16.440" lastbatchcompleted="2014-07-30T02:12:16.437" lastattention="1900-01-01T00:00:00.437" clientapp="Internet Information Services" hostname="CHTWEB-CH2-11P"
hostpid="12776" loginname="chatuser" isolationlevel="read uncommitted (1)" xactid="1145783104" currentdb="8" lockTimeout="4294967295" clientoption1="671088672" clientoption2="128058">
<inputbuf>
UPDATE analyst_monitor SET cam_status = N'4', cam_event_data = N'sales2', cam_event_time = current_timestamp , cam_modified_time = current_timestamp , cam_room = '' WHERE cam_analyst_name=N'12345' AND cam_window= 1 </inputbuf>
</process>
</process-list>
<resource-list>
<keylock hobtid="72057654588604416" dbid="8" objectname="CHAT.dbo.analyst_monitor" indexname="IX_Clust_scam_an_name_window" id="lock4befe1100" mode="X" associatedObjectId="72057654588604416">
<owner-list>
<owner id="process9cba188" mode="X" />
</owner-list>
<waiter-list>
<waiter id="process1209f498" mode="X" requestType="wait" />
</waiter-list>
</keylock>
<keylock hobtid="72057654588604416" dbid="8" objectname="CHAT.dbo.analyst_monitor" indexname="IX_Clust_scam_an_name_window" id="lock18ee1ab00" mode="X" associatedObjectId="72057654588604416">
<owner-list>
<owner id="process1209f498" mode="X" />
</owner-list>
<waiter-list>
<waiter id="process9cba188" mode="X" requestType="wait" />
</waiter-list>
</keylock>
</resource-list>
</deadlock>
</value>
</data>
</event>

To be honest, I don't think the transaction is necessary, but the developers put it there anyway. The select statement will put the result cam_status
into a variable, and then depends on its value, it will decide whether to execute the second update statement or not. I still can't upload the screen-shot, because it says it needs to verify my account at first. No clue at all. But it is very simple, just
like:
Clustered Index Update
[analyst_monitor].[IX_Clust_scam_an_name_window]
cost: 100%
By the way, for some reason, I can't find the object based on the associatedObjectId listed in the XML
<keylock hobtid="72057654588604416" dbid="8" objectname="CHAT.dbo.analyst_monitor"
indexname="IX_Clust_scam_an_name_window" id="lock4befe1100" mode="X" associatedObjectId="72057654588604416">
For example:
SELECT * FROM sys.partition WHERE hobt_id = 72057654588604416
This return nothing. Not sure why.

Does USD NACHA CCD Plus Format support one single payment with one vendor?

Hi,
We are implementing USD NACHA CCD Plus Format file for my customer.
Have the following query:
Does USD NACHA CCD Plus Format support one single payment with one vendor and another single payment with
different vendor in single file or will it generate two files for two payments or will it support single payment only.
Can anyone help us in this regard.
Thanks,Venkat.

I have created one invoice1 with one vendor and another invoice 2 with
different vendor processed the PPR using USD NACHA CCD Plus Format .
Both two payments came single file.
But we know that USD NACHA CCD Plus Format support Single Payment only.
Can anyone help us in this regard.
Thanks,Venkat

Is it possible to monitor more than one target/Host with one agent in OEM 12c?

Hi,
Is it possible to monitor more than one target/Host with one agent in OEM 12c? Please assist me on this

Since by definition a single EM agent must reside on a single database host, then, no, you can't monitor multiple hosts.
Unless you mean that you want to monitor multiple virtual hosts from a single physical host ... but in that case, you'd still need one host per database host.
That's just the way EM works. Always has, probably always will.

Table with in a table Popin

Hi,
I need to put a table with in a Table pop in. I am able to achieve the table but the I am unable to display different data for each pop in. action.
Example.
Table has 3 records
Row 1
Row 2
Row 3
On expanding Row1 using pop in I am able to display the table.
On expanding Row 2, leaving Row 1 expanded, changes the data in both the Areas, showing data of Row 2.
Could you please help in resolving the issue.

Hi Prasanth,
To display different data inside the table popin, create child node inside the parent node.
Parent_node(0....n)
Child_node( 0....n )
Create a supply function for CHILD_NODE and on select of any row in parent table, write the logic to fill data of child node . Bind this child node to TABLE_POPIN's table
Now, if you select row1, you can fill child node in supply function and it populates the data,
similarly, it works for other rows as well
Hope this helps you.
Regards,
Rama

The table with Name of 'Table Name' does not exist.An error occurred when loading the Model.

The table with Name of 'Table Name' does not exist.An error occurred when loading the Model.
We get this error when we try to check the properties of an analysis server using SQL Server Management studio(right click the instance name
and check properties). We have resolved this issue twice by Stopping the SQL Server analysis service,removing db folders from Analysis Server Data folder and starting the services back on. The db folder that we removed was advised by the BI team.
The SQL Server Analysis Server is 2012 SP1

Hi RB_ORIPW,
The table with name of 'XXX' doesn't exist.
An error occurred when loading the model(Micorsoft.AnalysisServices)
If I understanding correctly, you encounter the error randomly, now what you want it that avoid this issue completely, other than stop the services, detele the db filder and restart the services, right?
The error might be caused by that the data file is corrupted. However, we cannot give you the exact reason that cause this issue. You can troubleshoot this issue by using the Windows Event logs and msmdsrv.log.
You can access Windows Event logs via "Administrative Tools" --> "Event Viewer". SSAS error messages will appear in the application log.
The msmdsrv.log file for the SSAS instance that can be found in \log folder of the instance. (C:\Program Files\Microsoft SQL Server\MSAS10.MSSQLSERVER\OLAP\Log)
Here is a blog about data collection for troubleshooting Analysis Services issues, please see:
Data collection for troubleshooting Analysis Services issues
Besides, here is fix that describe the similar issue, and it was fixed in Cumulative Update 7 for SQL Server 2012 SP1, please refer to the link below to see the details.
http://support.microsoft.com/kb/2897263/en-us
Regards,
Charlie Liao
If you have any feedback on our support, please click
here.
Charlie Liao
TechNet Community Support

Joining two fact tables with different dimensions into single logical table

Hi Gurus,
I try to accomplish in Oracle Business Intelligence 11.1.1.3.0:
F1 (D1, D2 and D3)
F2 (D1 and D2 and D4)
And we want to build a report F1 F2 D1 D2 D3 D4 to have data for:
F1 that match only for D1-D2-D3
and data for
F2 that match only D1-D2-D4
all that in one row, so D3 and D4 are not common dimensions.
I can only do:
F3 (D1, D2)
F4 (D1, D2 and D4)
And report
F3 F4 D1,D2,D4 (all that in one row, and only D4 is not a common dimension)
Here is the very good example how to accomplish the scenario 1
http://108obiee.blogspot.com/2009/08/joining-two-fact-tables-with-different.html
But looks like it does not work in 11.1.1.3.0
I get
State: HY000. Code: 10058. [NQODBC] [SQL_STATE: HY000] [nQSError: 10058] A general error has occurred. [nQSError: 43113] Message returned from OBIS. [nQSError: 14025] No fact table exists at the requested level of detail: [,,Clients,,Day,ROI,,,,EW_Names,,,,,,,,,,,,,,,,,]. (HY000)
I am sure I set up everything correctly as advised in the blog but it works with only one not a common dimension
Is it a bug in 11.1.1.3.0 or something?
Thanks,
Kate

Thanks for all your replies.
Actually, I've tried the solutions you guys mentioned. Generally speaking, the result should be displayed. However, my scenario is a little bit tricky.
table Y's figures are not the aggregation of table X for D dimension. Instead, table Y's figures include not only D dimension total, but also others (others do not mean A, B, C dimension). For example, table Y stores all food's figure, while table X stores only drink's figure. D dimension is only about drink's detail. In my scenario, other foods' figure is not provided.
So, even if I set D dimension to all/total for table X, table X's result is still not the same as table Y.
Indeed, table Y does not have a column key to join to D dimension's key. So, if I select D dimension and table Y's measures at the same time in BI Answer, result returns no data. Hence, I can't compare table X and table Y's results with selection of D dimension.
Is there any solution to solve this problem?
Edited by: TomChan on Jun 3, 2009 9:36 AM

How to show two seperate pivot tables with one select column

Hi All
My client wishes to have two pivot tables, one showing positive results and the other showing negative results.
For Example:
DIMENSION
BUSINESS A          1000
BUSINESS B          500
BUSINESS C          100
DIMENSION
BUSINESS A          -1000
BUSINESS B          -500
BUSINESS C          -100
Is it possible to then select the different DIMENSION with one select column for both?
Thanks

Not sure I got it right try this
for Number column pull twice and set col*-1
use 2 pivot table for each number type
cool as ~ http://cool-bi.com

Issue using one 2 Fact tables with one dimension Table.

Similar Messages

Maybe you are looking for