Error in the BI Publisher

Hello All,
I am going through the Oracle BI Publisher configuration and this is the output I am getting. While starting the OC4J, this is the error I am getting. Please, what can be done?
Regards
at org.quartz.impl.jdbcjobstore.JobStoreSupport$ClusterManager.run(JobStoreSupport.java:2409)
* Nested Exception (Underlying Cause) ---------------
java.sql.SQLException: ORA-00942: table or view does not exist
at oracle.jdbc.driver.DatabaseError.throwSqlException(DatabaseError.java:138)
at oracle.jdbc.driver.T4CTTIoer.processError(T4CTTIoer.java:316)
at oracle.jdbc.driver.T4CTTIoer.processError(T4CTTIoer.java:282)
at oracle.jdbc.driver.T4C8Oall.receive(T4C8Oall.java:639)
at oracle.jdbc.driver.T4CPreparedStatement.doOall8(T4CPreparedStatement.java:185)
at oracle.jdbc.driver.T4CPreparedStatement.execute_for_describe(T4CPreparedStatement.java:503)
at oracle.jdbc.driver.OracleStatement.execute_maybe_describe(OracleStatement.java:1029)
at oracle.jdbc.driver.T4CPreparedStatement.execute_maybe_describe(T4CPreparedStatement.java:535)
at oracle.jdbc.driver.OracleStatement.doExecuteWithTimeout(OracleStatement.java:1126)
at oracle.jdbc.driver.OraclePreparedStatement.executeInternal(OraclePreparedStatement.java:3001)
at oracle.jdbc.driver.OraclePreparedStatement.executeQuery(OraclePreparedStatement.java:3043)
at org.apache.commons.dbcp.DelegatingPreparedStatement.executeQuery(DelegatingPreparedStatement.java:205)
at org.quartz.impl.jdbcjobstore.StdRowLockSemaphore.obtainLock(StdRowLockSemaphore.java:137)
at org.quartz.impl.jdbcjobstore.JobStoreTX.doCheckin(JobStoreTX.java:1386)
at org.quartz.impl.jdbcjobstore.JobStoreSupport$ClusterManager.manage(JobStoreSupport.java:2378)
at org.quartz.impl.jdbcjobstore.JobStoreSupport$ClusterManager.run(JobStoreSupport.java:2409)
Exception [TOPLINK-4002] (Oracle TopLink - 10g Release 3 (10.1.3.0.0) (Build 060118)): oracle.toplink.exceptions.DatabaseException
Internal Exception: java.sql.SQLException: ORA-00942: table or view does not exist
Error Code: 942
Call:SELECT t0.OUTPUT_ID, t0.MESSAGE, t0.DELETED, t0.STATUS, t0.DOCUMENT_DATA_AVAILABLE, t0.STATUS_DETAIL, t0.DOCUMENT_DATA_CONTENT_TYPE, t0.XML_DATA, t0.CREATED, t0.XML_DATA_AVAILABLE, t0.DOCUMENT_DATA_COMPRESSED, t0.XML_DATA_COMPRESSED, t0.DOCUMENT_DATA, t0.XML_DATA_CONTENT_TYPE, t0.LAST_UPDATED, t0.JOB_ID FROM XMLP_SCHED_OUTPUT t0 WHERE ((t0.DELETED = 'N') AND EXISTS (SELECT t1.SUBSCRIPTION_ID FROM XMLP_SCHED_JOB t3, XMLP_SCHED_JOB t2, XMLP_SCHED_SUBSCRIPTION t1 WHERE (((t1.SUBSCRIBER = 'Administrator') AND (t2.JOB_ID = t3.JOB_ID)) AND ((t2.JOB_ID = t1.JOB_ID) AND (t3.JOB_ID = t0.JOB_ID)))) ) ORDER BY t0.CREATED DESC
Query:ReadAllQuery(oracle.apps.xdo.servlet.scheduler.toplink.XmlpSchedOutput)
Exception [TOPLINK-4002] (Oracle TopLink - 10g Release 3 (10.1.3.0.0) (Build 060118)): oracle.toplink.exceptions.DatabaseException Internal Exception: java.sql.SQLException: ORA-00942: table or view does not exist Error Code: 942 Call:SELECT t0.OUTPUT_ID, t0.MESSAGE, t0.DELETED, t0.STATUS, t0.DOCUMENT_DATA_AVAILABLE, t0.STATUS_DETAIL, t0.DOCUMENT_DATA_CONTENT_TYPE, t0.XML_DATA, t0.CREATED, t0.XML_DATA_AVAILABLE, t0.DOCUMENT_DATA_COMPRESSED, t0.XML_DATA_COMPRESSED, t0.DOCUMENT_DATA, t0.XML_DATA_CONTENT_TYPE, t0.LAST_UPDATED, t0.JOB_ID FROM XMLP_SCHED_OUTPUT t0 WHERE ((t0.DELETED = 'N') AND EXISTS (SELECT t1.SUBSCRIPTION_ID FROM XMLP_SCHED_JOB t3, XMLP_SCHED_JOB t2, XMLP_SCHED_SUBSCRIPTION t1 WHERE (((t1.SUBSCRIBER = 'Administrator') AND (t2.JOB_ID = t3.JOB_ID)) AND ((t2.JOB_ID = t1.JOB_ID) AND (t3.JOB_ID = t0.JOB_ID)))) ) ORDER BY t0.CREATED DESC Query:ReadAllQuery(oracle.apps.xdo.servlet.scheduler.toplink.XmlpSchedOutput)

In the disk where you installed the BI Publisher, there is no space left in the disk
You got free up some space in that disk

Similar Messages

  • Publish error - error determining the .Mac publish configuration values

    I have been unable to publish a website refresh for the past 2 weeks (not since the first time I tried). When I attempt to publish, it hangs at the "preparing to publish" window and then gives the error message "There was an error determining the .Mac publish configuration values. Please try again in a few minutes." It does not then release this error window to close until it pops open another window telling me how many days I have left on my trial .mac account. It has the correct number of days so I assume that it is communicating with the .mac server at some level. My internet connection is via satellite. This is my only option as I am shipboard. Update: I was able to able to connect via cable recently and, much to my surprise (and frustration), everything posted fine. I have the most recent updates for all software including iWeb running on a MacBook 2GHz, 2GB ram and 28GB free harddisk(iWeb 1.1.2 and OS X 10.4.8 build 8L2127 ). My internet connectivity is fine for other applications and for other aspects of iWeb. The primary reason I purchased the MacBook was to use the iWeb and its publishing capability. I note from other threads that this is an established problem with iWeb and satellite internet connections. Has there been any reliable fix established for this problem? The last thread I could find was last summer (and nothing from Apple), seemingly enough time for Apple (or the creative members of AppleNation) to address it. Given the high cost and sporadic reliability of shipboard internet, I'm hoping to use .mac to host site because of the incremental update capability. If there hasn't been a reliable fix determined, can anyone recommend a hosting site/method that does work reliably with iWeb and a satellite internet connection. I'm completely in the dark how this would work. This is my first website experience.
    Any and all help would be greatly appreciated. I already sent out the .mac website in my Christmas letter so I'm fairly commited (but could recover, if unworkable)
    Thanks mucho!
    MacBook 2GHz, 2GB   Mac OS X (10.4.8)   shipboard satellite internet connection

    Now that would be cool...if we could figure out how to tell iWeb to be a little more patient with network latency! From all the reports here, it seems that if anything, iWeb has gotten more stringent in its network latency tolerance over the various little updates.
    I personally use .Mac for my iWeb hosting right now... But you are right... if you could find some alternate place to host your iWeb pages, then you can use any FTP program to do the uploading.... and maybe be more successful from the shipboard internet access.
    You might take a look at some of the free webhosts available... http://www.free-webhosts.com/ I have had pretty good experience with http://www.hostfreeweb.com/.

  • When trying to use Java to scan checks in my financial software I get an error message, "The publisher cannot be verified by a trusted source. Code will be treated as unsigned."

    I am trying to scan checks in the USAA.com website and Java is giving me an error message: "The publisher cannot be verified by a trusted source. Code will be treated as unsigned."

    Serac wrote:
    Hi,
    I am occasionally running into an issue where I get the following error:
    "The publisher cannot be verified by a trusted source.Code will be treated as unsigned."
    I am not sure how to stop getting this error or what the root cause of the issue is.
    Any idea what could be causing this? and how I can get rid of it? is this a bug in the JRE?
    Thanks,
    DeeOn the contrary. It shows that Java takes your security very seriously and it will not allow
    hackers to format your hard-disk, get personal data etc.
    Google for signed applets.

  • Getting a heap error while opening the BI Publisher Console login page

    Hi,
    I have installed BI Publisher 10.1.3.4.2 on OC4J on Windows 7 OS and getting the following error on opening the BI Publisher Login Console.
    *2013-04-30 20:44:31.921 NOTIFICATION J2EE JSP-0008 Unable to dispatch JSP Page*
    *: Exception:oracle.jsp.provider.JspCompileException: <H3>Errors compiling:C:\Ora*
    Home_2\oc4j_bi\j2ee\home\application-deployments\xmlpserver\xmlpserver\persisten
    ce\_pages\\_login.java</H3><pre>Could not create the Java virtual machine.
    Error occurred during initialization of VM
    Could not reserve enough space for object heap
    *</pre>*
    Thanks !

    set the JAVA_HOME environment variable to point to the same location where the JDK for OC4J standalone is located

  • When trying to share my movie i get a error message The project could not be prepared for publishing because an error occurred. (-108)" pls help

    when trying to share my movie on Imovie i get the following error. "The project could not be prepared for publishing because an error occurred. (-108)"
    any idea why this has happened? How do i rectify this?

    Hi
    Error -108 memFullErr  Ran out of memory [not enough room in heap zone]
    Turn off - TimeMachine usually works - re-try.
    (the Application down in the Dock - not the Device)
    But this can mean many thing's - My first thought is
    • Free Space on Start-Up hard disk. How much ? (other disks do not count)
    Yours Bengt W

  • Error states: the version of this file is not compatible with the version of Windows you're running. Check your computer's system information to see whether you need an x86 or x64 version of the program, and then contact the software publisher. My compute

    Where do you go for help when it tells you to contact the software publisher?

    Hey jz,
    Could you please let me know when does this error comes on your system. What kind of file do you have?
    Also, tell me what is your OS and Acrobat version?
    Regards,
    Anubha

  • Unable to publish projects with inserted video - error message The Flash video can not be loaded

    I've created a project in Captivate 6 with two slides that have inserted videos in them
    Both the videos were created in Captivate 6 by publishing those projects as mp4 videos
    They play fine in the previews but when publishing I get the error saying the Flash video can not be loaded for both of those slides and in the output files the area for the video is blank.
    I have checked that the videos are not open anywhere else as I saw on a previous post this was the issue but the only place they are in use is in the project I am trying to publish.
    Below are my settings and the error message
    Any suggestions would be greatly appreciated.

    Your screenshot indicates you are publishing to a folder on a network drive.
    Have you:
    Verified whether or not the video file exists at the published folder location? (It should ideally be sitting in the same folder as the SWF that calls it.)
    Verified that the folder location is set up as a trusted location in your Flash Global Security settings?

  • Proxy servers and the "cannot publish" error - v.1.1.2

    Using the latest iWeb (1.1.2), attempts to publish my work to my .Mac account resulted in the infamous "publish error." I then came across this KB article:
    http://docs.info.apple.com/article.html?artnum=303927
    I turned off my proxy access in the Network settings, and voila, publishing was successful. But now, I'm circumventing my much-needed proxy.
    It's been suggested in other threads here that proxies aren't a problem if one's iDisk is accessible through it. This is not the case. With the proxy, iDisk access is fine, it's only iWeb publishing that is a problem.
    Any way to keep my proxy and still publish with .Mac?

    iDisk access and iWeb publishing ARE indeed different activities. They are similar in that they both utilize the WebDAV protocol over Port 80, but they are different in their individual requirements for back and forth communications with the .Mac servers in terms of how soon or in what timeframe they expect to hear confirmation of transfer back from the server.
    It is apparent to me that the network timeout threshold for copying something to iDisk is a lot longer than that for publishing through iWeb. In fact, I would say that iWeb has become a lot more stringent with network timeouts ever since it was updated from 1.0 to 1.1.
    Anything in between your computer and the .Mac servers contributes to network latency. There are both software and hardware contributions to this latency. Proxy servers, like routers, can be software or hardware based. Software-based latency is most often greater than hardware-based latency.
    I would guess that removing any kind of latency "generating" obstacles within your control would likely improve iWeb function and decrease the incidence of publish errors. Some of these obstacles can include background processes, busy LAN activity (like VOIP use or streaming music/video or online gaming), wireless access points, proxy servers, and routers.
    On the other hand, I also think that if Apple increased iWeb's network timeout threshold, that most of the publishing errors that people experience could be eliminated.

  • Site published by WCF publishing wizard throws "Error in the application.."

    Hi, I'm running BizTalk 2013r2 and run into a problem with the publishing wizard.
    I have used the BizTalk WCF publish wizard, following the the steps:
    Metadata only endpoint (MEX), publish for receive location <I select existing WCF-BasicHttp receive location from my Biztalk app>
    Publish schemas as a WCF service
    Update the web service description tree view to give a single one-way web method
    Give a target namespace (currently using http://tempuri.org/)
    Enter location for website (http://localhost/BTS-Store6), select Overwrite existing location, Allow anonymous access
    Generated service summary is below:
    Summary of WCF service description
    <?xml version="1.0" encoding="utf-16"?>
    <WcfServiceDescription xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:xsd="http://www.w3.org/2001/XMLSchema" Name="BizTalkWcfService" TargetNamespace="http://tempuri.org/" xmlns="http://schemas.microsoft.com/BizTalk/2006/01/Adapter/Wcf/Publishing">
      <LocationSettings Location="http://localhost/BTS-Store6" Overwrite="true" AuthAnonymous="true" />
      <ApplicationSettings CreateReceiveLocations="false" ApplicationName="" />
      <AdapterSettings AdapterName="" />
      <MetadataSettings EnableMetadata="false" MetadataOnly="true" ReceiveLocationName="RcvStore6POS_WCF" />
      <WcfServices>
        <WcfService Name="OnRamp">
          <WcfOperations>
            <WcfOperation Name="POSTransaction" Flow="OneWay">
              <WcfMessages>
                <WcfMessage Name="Request" Direction="Input">
                  <WcfMessageType Category="XsdType" TypeName="BTS.GO.Store6.Schemas.BT.POSTranaction" AssemblyName="BTS.GO.Core.Store6.Schemas, Version=1.0.0.0, Culture=neutral, PublicKeyToken=0a9764041befeb8b"
    AssemblyLocation="C:\Windows\Microsoft.Net\assembly\GAC_MSIL\BTS.GO.Core.Store6.Schemas\v4.0_1.0.0.0__0a9764041befeb8b\BTS.GO.Core.Store6.Schemas.dll" TargetNamespace="http://BTE.ESB.StoreInputModel.POSTransaction" RootName="POS"
    IsAnyType="false" IsEnvelope="false" />
                </WcfMessage>
              </WcfMessages>
            </WcfOperation>
          </WcfOperations>
        </WcfService>
      </WcfServices>
    </WcfServiceDescription>
    Problem is, after publish the site, I can browse to the .svc, and use WCF storm to consume the WSD - all is good. However, after leaving it for about 30 minutes - when I next try to access the service the following error is thrown:
    <<Eventxmlns="http://schemas.microsoft.com/win/2004/08/events/event">
    <System>
      <Provider
    Name="System.ServiceModel 4.0.0.0"/>
      <EventIDQualifiers="49154">3</EventID>
      <Level>2</Level>
      <Task>5</Task>
      <Keywords>0x80000000000000</Keywords>
      <TimeCreated
    SystemTime="2015-01-12T12:26:41.000000000Z"/>
      <EventRecordID>293995</EventRecordID>
      <Channel>Application</Channel>
      <Computer>xxx.xxx.local</Computer>
      <Security
    UserID="S-1-5-21-1638455640-2704731959-1606034848-1010"/>
      </System>
    <EventData>
      <Data>System.ServiceModel.Activation.HostedHttpRequestAsyncResult/11812267</Data>
      <Data>System.ServiceModel.ServiceActivationException: The service '/BTS-Store6/OnRamp.svc' cannot be activated due to an exception during compilation.
    The exception message is: Error in the application.. ---> System.ApplicationException: Error in the application. at System.Runtime.InteropServices.Marshal.ThrowExceptionForHRInternal(Int32 errorCode, IntPtr errorInfo) at System.Management.ManagementObjectCollection.ManagementObjectEnumerator.MoveNext()
    at Microsoft.BizTalk.Adapter.Wcf.Metadata.ConfigurationInfo.GetReceiveLocation(String receiveLocationName) at Microsoft.BizTalk.Adapter.Wcf.Metadata.MexServiceHostFactory.CreateServiceHost(String constructorString, Uri[] baseAddresses) at System.ServiceModel.ServiceHostingEnvironment.HostingManager.CreateService(String
    normalizedVirtualPath, EventTraceActivity eventTraceActivity) at System.ServiceModel.ServiceHostingEnvironment.HostingManager.ActivateService(ServiceActivationInfo serviceActivationInfo, EventTraceActivity eventTraceActivity) at System.ServiceModel.ServiceHostingEnvironment.HostingManager.EnsureServiceAvailable(String
    normalizedVirtualPath, EventTraceActivity eventTraceActivity) --- End of inner exception stack trace --- at System.Runtime.AsyncResult.End[TAsyncResult](IAsyncResult result) at System.ServiceModel.Activation.HostedHttpRequestAsyncResult.End(IAsyncResult result)</Data>
      <Data>w3wp</Data>
      <Data>21772</Data>
      </EventData>
      </Event>
    With an exception message as vague as "Error in the application.."
    I'm at a loss as to what may be causing this. I have tried this many times. Usually, but not always, after republishing the site from the wizard I am able to browse to the service. The later, with semmingly only elapsed time being a changing factor, it
    fails.
    Any ideas?

    Hi Rob,
    Coming to your error, it’s really strange. You can able to access/use your WCF service for a while and after sometime you get error. Few things which I would recheck are as follows:
    Make sure it’s not due to your active directory. I would check if there are any issue with AD after an elapsed period of time to valid my app pool credentials.
    In your Application-pool, under process model, try by increasing the “Idle Time-out (minutes)”. This time decides the amount of time worker process will remain idle before its shutdown.
    I personally never required to change it from default value-20 mins, but looking at your issue, it’s worth trying this.
    In your Application-pool, under CPU, Check the setting “Limit Action” to “KillW3WP”. Default is “NoAction”. “KillW3WP” setting potential could have impact like yours. If so change it to
    “NoAction”.
     When you create a WCF service using wizard, I expect to have default values; check any setting at IIS level is having an impact.
    Few things I would try:
    Create a separate App pool for this WCF service and check the impact
    Reapply the credentials of you app pool. Just simply go to the “Identity” section and reapply the same valid credentials. This could clear any cache related things to do
    with the credentials/AD validation.
    I understand you’re overwriting the service/virtual directory while creating the SCF service in Wizard. Try manually deleting the virtual directory folder and create the
    WCF server as fresh using Wizard, without using the overwrite checkbox.
    Hope the above suggest helps.
    If this answers your question please mark it accordingly. If this post is helpful, please vote as helpful by clicking the upward arrow mark next to my reply.

  • Published Flash module and 404 errors in the web server log

    I’ve created a Presenter module, published it to my computer, and uploaded all the files to a web server. And it plays fine via the web.
    The odd thing is a bunch of 404 errors in the web log:
    10.1.2.104 - - [29/Jul/2009:10:36:00 -0700] "GET /repository/university/courses/3/flash/data/spk10821.1.jpg HTTP/1.1" 404 255 "-" 1166 419
    10.1.2.104 - - [29/Jul/2009:10:36:29 -0700] "GET /repository/university/courses/3/flash/data/spk10821.1.jpg HTTP/1.1" 404 255 "-" 1166 419
    10.1.2.104 - - [29/Jul/2009:10:36:57 -0700] "GET /repository/university/courses/3/flash/data/spk10821.1.jpg HTTP/1.1" 404 255 "-" 1166 419
    In the data directory there is a file named spk10821.jpg that was generated by Presenter. The image is actually the presenter bio photo that would normally show up in the sidebar -- but no photo is there. The browser never requests the valid spk10821.jpg file, only the non-existent spk10821.1.jpg path.
    Anybody know why this would be happening? I see in data/viewer.xml there is a tag for <image>spk10821.1.jpg</image> but I don’t know why Presenter would mention that file in the XML but generate a differently-named one in the publish folder.
    I’m wondering if I should have the web server rewrite requests with the ".1.jpg" ending to get rid of the ".1" part so they will work.
    By the way, this is with PowerPoint 2003 SP3 and Presenter 7.0.1.

    Hi Daniel,
    I am assuming that you are using Visual Studio 2010 to target the .Net framework 4.0
    Crystal Reports 2008 is not compatible with VS 2010. Use [Crystal Reports for Visual Studio 2010|Crystal Reports for Visual Studio 2010 Production Release Now AvailableCystlR%2528SAPWeblogs%253ACrystal+Reports%2529] to target .Net framework 4.0.
    Deploy the application using the methods specified in the 'Deployment' section of the [CR for VS 2010 .Net SDK developer guide|http://help.sap.com/businessobject/product_guides/sapCRVS2010/en/crnet_dg_2010_en.zip].
    See if you can reproduce the issue after redeploying the application as mentioned above.
    Few questions-
    - Is it the dev machine or production machine causing the issue?
    - OS version?
    - What does the application do? i.e. view, export, print report?
    - Issue is with some reports or all the reports.
    See if there is an image on the report, remove the image and add it as a picture object ' Insert --> Picture' from the CR designer.
    Hope this helps,
    Bhushan.

  • In iWeb I created a hyperlink to a file on my computer. When I publish I get a 404 error for the link.  Can anyone help?

    In iWeb I created a hyperlink to a file on my computer. When I publish I get a 404 error for the link.  Can anyone help?

    How would I check to see if the like works when I enable via the inspector pane
    If you enable hyperlinks when you click on the link link to the pdf file it will open a browser window and display the pdf file.
    I upload the pdf files to the server and link to them as if they were an external web page:
    That's been more reliable for me than linking to the file as Link To: A file and have iWeb upload the pdf file to the serve.

  • Installing 9iAS on Orcale9i - Followed the document published in OTN -Error in SQLLDR

    Hello
    I followed the document published in http://portalcenter.oracle.com that describes installing Orcle9iAS 10222 on Oracle9i database.
    However, in the last step (just before installing the patch 30982), I am supposed to use Portal configuration Assistant to create PORTAL30 and other accounts. (Win2K)
    The PCA stops with the error. INSTALL.LOG gives the following error:
    STEP 13 : Installing NLS Messages
    INSTALL_ACTION:loadNLS() : ..\..\bin\sqlldr userid='portal30/portal30@(DESCRIPTION=(ADDRESS_LIST=(ADDRESS=(PROTOCOL=TCP)(HOST=tmurari-lap)(PORT=1521)))(CONNECT_DATA=(SID=orcl)))' control=..\..\portal30\admin\plsql\wwc\wwcus.ctl
    SQL*Loader-704: Internal error: ulconnect: OCIServerAttach [0]
    ORA-12532: TNS:invalid argument
    However, the previous steps (which uses SQLPLUS (DESCRIPTION=..._ ) works fine. Looks SQLLDR.exe 0ra9ias/bin directory does not understand this type of database descriptor address.
    Is there a document which will help me in installing the remaining steps manually? Is there a fix for this without the manual steps.
    Please help.
    Thanks
    Tam.

    I had a net configuration error in my tnsnames.ora and sqlnet.ora. I fixed it and I was able to install Oracle9iAS 10222 in Oracle9i 9011 database. everything works fine, however, I am having some trouble installing online help.
    The release notes in metalink describes a few steps in getting it installed, however, I cannot the very first step working.

  • Error after upgrading BI Publisher report from 10g to 11g

    Hi All,
    I have migrated the BI Publisher from 10g to 11g. The upgrade was done using the upgrade assistant and the installation process was a success.
    However whenever I try to access the reports in 11g after migration I get the following error:
    oracle.xdo.servlet.CreateException: Data Model definition not found:/dlypurge.xdm.
    I have tried modifying the .xdo to include the following:
    <dataModel url="/RMS/dlypurge/dlypurge.xdm"/> where dlypurge is one of the reports. However in the BI Publisher does not seem to access the latest .xdo file.
    Any suggestions on how to rectify the error.
    Sanchita Chakrabarty

    Hi All,
    I have migrated the BI Publisher from 10g to 11g. The upgrade was done using the upgrade assistant and the installation process was a success.
    However whenever I try to access the reports in 11g after migration I get the following error:
    oracle.xdo.servlet.CreateException: Data Model definition not found:/dlypurge.xdm.
    I have tried modifying the .xdo to include the following:
    <dataModel url="/RMS/dlypurge/dlypurge.xdm"/> where dlypurge is one of the reports. However in the BI Publisher does not seem to access the latest .xdo file.
    Any suggestions on how to rectify the error.
    Sanchita Chakrabarty

  • Showing the XML publisher report in an iframe..

    Hi all..
    Please help me with this question.
    Before: We had a "http page" and we are showing a XML Publisher report which is also in "http" ,in an iframe of the parent page. Previously it was working fine, as both are http.
    *** Basically we are generating a URL of the report and showing it in a iframe of the web application****
    Now: Recently we configured ssl to the parent page (https), and the report sever is still in "http". Because of this difference, whenever we are calling that report,it is showing a security alert and redirecting to totally wrong page.
    Is there any configurations that i can do in the ""report server" to rectify this issue.Please help me with this issue.
    Thank u

    Hi Ravi ,
    can i do it only with the xml Publisher , because when i tried it in the past and get all the staff like Template / DD / CP up and running and started the CR i get an error from the system that he is missing a report directly in the file system... so he searched for the report himself on system like a standard 6i Report. But the template and the dd is stored in the db. So my question again, can I use the XML Puplisher without a Standard Report or can i use a dummy file only for checking and after that he use my template / dd.
    regards
    Kay

  • Exchange Connector 3.0 (Hotfix Release) Error - Error Message=The key value of an object cannot be changed.

    Hello,
    I am running Service Manager 2012 with the Exchange Connector 3.0 RTM (Re-release Version).  The issue I have is that when an e-mail is processed that is trying to update the status or event log of an incident, the Exchange Connector encounters an error
    and will not update the object.  The Operations Manager log denotes: 
    Exchange Connector: Unable to process mail item. Subject="Close Ticket: [IRXXXXX]", Error Message=The key value of an object cannot be changed.
    This will happen on a seemingly random selection of Incident work items.  I cannot correlate them with a specific template, exchange connector, or incident tier queue that could be causing the issue.  I can recreate the way a specific ticket
    was created and update it through e-mail without issue, and the next ticket can cause the error to trigger. 
    I have already opened a Microsoft Support Case using our Software Assurance agreement.  After a few months of troubleshooting the issue and trying different fixes, Microsoft support said they were unable to fix the problem and that we would need to
    purchase Premier support to go further. At this point I thought I would reach out to the community for ideas.
    The setup I have for the Exchange connectors is as follows.
    I have three separate Exchange connectors set up to three different mailboxes.  One Exchange connector processes external support tickets and applies a specific template.  Another processes client support tickets and applies a different template. 
    And the last Exchange connector processes internal tickets and also processes the updates of tickets created by the other two exchange connectors. 
    Here are the fixes I've attempted so far:
    1.  Changed the templates that each Exchange connector applies.
    2.  Changed the management pack that each template is stored in.
    3.  Checked my management pack(s) for extended classes by searching for Extension="true" (This was also checked by Microsoft support)
    4.  Deleted each Exchange connector and recreated each connector
    5.  Deleted each Exchange connector, deleted the management pack, and reinstalled the management pack and connectors
    6.  Repeated Step 5, deleted Microsoft.SystemCenter.ExchangeConnector.dll and Microsoft.SystemCenter.ExchangeConnector.resources.dll and then installed the Exchange connector Re-release version 3.0 Published 10/7/2013 (which is supposed to address this
    issue)
    7.  Deleted the HealthServiceState folder and restarted the Management Service
    I'm not really sure what to do at this point.  I've put many hours into customizing my installation to get it working for my organization so reformatting and starting from scratch would be a nightmare scenario.  This environment is in production.
    I do have a band-aid in place using Orchestrator.  Basically I have a monitor task searching for the error message and when it finds one it searches the mailbox for the offending e-mail and applies either the Resolve or Close status change that is requested
    from the user.  However, I do not have it working to update the ticket if a comment is applied to the incident.  If anyone is in this position and needs to know how to apply this Orchestrator task I am willing to provide my workflow.
    I am new to the community and am already impressed with the amount of help and effort there is in this forum.  I appreciate in advance any help that is provided and am open to any ideas at this point.  I can post more information as needed.
    Thank you,
    John

    Yes that is the whole template.  However, I did confirm that this is only happening to incidents where either of two situations triggers a runbook to fire and modify the incident.  When I remove the activity from the incident it does clear the
    issue.  For some background the first Runbook Activity set's the first response date when an incident is resolved if the first response value is null.  The second assigns the incident to a user upon creation if the title contains assignto:username;
    1.)
    <ObjectTemplate ID="Template.d33b5bbcaf3c49b18d8b72bc1e5e1ee4" TypeID="IncidentManagement!System.WorkItem.Incident.ProjectionType">
    <Property Path="$Context/Property[Type='CustomSystem_WorkItem_Incident_Library!System.WorkItem.Incident']/Escalated$">False</Property>
    <Property Path="$Context/Property[Type='CustomSystem_WorkItem_Incident_Library!System.WorkItem.Incident']/NeedsKnowledgeArticle$">False</Property>
    <Property Path="$Context/Property[Type='CustomSystem_WorkItem_Incident_Library!System.WorkItem.Incident']/HasCreatedKnowledgeArticle$">False</Property>
    <Object Path="$Context/Path[Relationship='CustomSystem_WorkItem_Activity_Library!System.WorkItemContainsActivity' TypeConstraint='CustomMicrosoft_SystemCenter_Orchestrator!Microsoft.SystemCenter.Orchestrator.RunbookAutomationActivity']$">
    <Property Path="$Context/Property[Type='CustomMicrosoft_SystemCenter_Orchestrator!Microsoft.SystemCenter.Orchestrator.RunbookAutomationActivity.Base']/RunbookId$">4085f0da-ab83-48e5-bbe3-1f3b5fa2dc4a</Property>
    <Property Path="$Context/Property[Type='CustomMicrosoft_SystemCenter_Orchestrator!Microsoft.SystemCenter.Orchestrator.RunbookAutomationActivity.Base']/TemplateId$">Template.d33b5bbcaf3c49b18d8b72bc1e5e1ee4</Property>
    <Property Path="$Context/Property[Type='CustomMicrosoft_SystemCenter_Orchestrator!Microsoft.SystemCenter.Orchestrator.RunbookAutomationActivity.Base']/IsReadyForAutomation$">True</Property>
    <Property Path="$Context/Property[Type='CustomMicrosoft_SystemCenter_Orchestrator!Microsoft.SystemCenter.Orchestrator.RunbookAutomationActivity.Base']/PropertyMapping$">&lt;?xml version="1.0" encoding="utf-16"?&gt;
    &lt;ParameterMapping xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:xsd="http://www.w3.org/2001/XMLSchema"&gt;
    &lt;ParameterList&gt;
    &lt;RunbookParameterItem&gt;
    &lt;Name&gt;Get RA Guid&lt;/Name&gt;
    &lt;Id&gt;344b15effc1a44528e517c5b4227179c&lt;/Id&gt;
    &lt;Type&gt;String&lt;/Type&gt;
    &lt;Value&gt;Generic::Id&lt;/Value&gt;
    &lt;Direction&gt;In&lt;/Direction&gt;
    &lt;ContextInfo /&gt;
    &lt;/RunbookParameterItem&gt;
    &lt;/ParameterList&gt;
    &lt;RunbookId&gt;4085f0da-ab83-48e5-bbe3-1f3b5fa2dc4a&lt;/RunbookId&gt;
    &lt;/ParameterMapping&gt;</Property>
    <Property Path="$Context/Property[Type='CustomSystem_WorkItem_Activity_Library!System.WorkItem.Activity']/ChildId$">1906</Property>
    <Property Path="$Context/Property[Type='CustomSystem_WorkItem_Activity_Library!System.WorkItem.Activity']/Status$">$MPElement[Name='CustomSystem_WorkItem_Activity_Library!ActivityStatusEnum.Active']$</Property>
    <Property Path="$Context/Property[Type='CustomSystem_WorkItem_Activity_Library!System.WorkItem.Activity']/Skip$">False</Property>
    <Property Path="$Context/Property[Type='CustomSystem_WorkItem_Library!System.WorkItem']/Title$">Set First Response on Resolve</Property>
    </Object>
    </ObjectTemplate>
    2.)
    <ObjectTemplate ID="Template.b311e1f9126e4e19bbbbeb65ddb220ba" TypeID="IncidentManagement!System.WorkItem.Incident.ProjectionType">
    <Property Path="$Context/Property[Type='CustomSystem_WorkItem_Incident_Library!System.WorkItem.Incident']/Escalated$">False</Property>
    <Property Path="$Context/Property[Type='CustomSystem_WorkItem_Incident_Library!System.WorkItem.Incident']/Status$">$MPElement[Name='CustomSystem_WorkItem_Incident_Library!IncidentStatusEnum.Active']$</Property>
    <Property Path="$Context/Property[Type='CustomSystem_WorkItem_Incident_Library!System.WorkItem.Incident']/NeedsKnowledgeArticle$">False</Property>
    <Property Path="$Context/Property[Type='CustomSystem_WorkItem_Incident_Library!System.WorkItem.Incident']/HasCreatedKnowledgeArticle$">False</Property>
    <Object Path="$Context/Path[Relationship='CustomSystem_WorkItem_Activity_Library!System.WorkItemContainsActivity' TypeConstraint='CustomMicrosoft_SystemCenter_Orchestrator!Microsoft.SystemCenter.Orchestrator.RunbookAutomationActivity']$">
    <Property Path="$Context/Property[Type='CustomMicrosoft_SystemCenter_Orchestrator!Microsoft.SystemCenter.Orchestrator.RunbookAutomationActivity.Base']/RunbookId$">ca88b13b-861a-4d39-a3cb-fd912d951e35</Property>
    <Property Path="$Context/Property[Type='CustomMicrosoft_SystemCenter_Orchestrator!Microsoft.SystemCenter.Orchestrator.RunbookAutomationActivity.Base']/TemplateId$">Template.b311e1f9126e4e19bbbbeb65ddb220ba</Property>
    <Property Path="$Context/Property[Type='CustomMicrosoft_SystemCenter_Orchestrator!Microsoft.SystemCenter.Orchestrator.RunbookAutomationActivity.Base']/IsReadyForAutomation$">True</Property>
    <Property Path="$Context/Property[Type='CustomMicrosoft_SystemCenter_Orchestrator!Microsoft.SystemCenter.Orchestrator.RunbookAutomationActivity.Base']/PropertyMapping$">&lt;?xml version="1.0" encoding="utf-16"?&gt;
    &lt;ParameterMapping xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:xsd="http://www.w3.org/2001/XMLSchema"&gt;
    &lt;ParameterList&gt;
    &lt;RunbookParameterItem&gt;
    &lt;Name&gt;RA Activity GUID&lt;/Name&gt;
    &lt;Id&gt;5677d117a0294a2c898a695032f26c72&lt;/Id&gt;
    &lt;Type&gt;String&lt;/Type&gt;
    &lt;Value&gt;Generic::Id&lt;/Value&gt;
    &lt;Direction&gt;In&lt;/Direction&gt;
    &lt;ContextInfo /&gt;
    &lt;/RunbookParameterItem&gt;
    &lt;/ParameterList&gt;
    &lt;RunbookId&gt;ca88b13b-861a-4d39-a3cb-fd912d951e35&lt;/RunbookId&gt;
    &lt;/ParameterMapping&gt;</Property>
    <Property Path="$Context/Property[Type='CustomSystem_WorkItem_Activity_Library!System.WorkItem.Activity']/ChildId$">1120</Property>
    <Property Path="$Context/Property[Type='CustomSystem_WorkItem_Activity_Library!System.WorkItem.Activity']/Status$">$MPElement[Name='CustomSystem_WorkItem_Activity_Library!ActivityStatusEnum.Active']$</Property>
    <Property Path="$Context/Property[Type='CustomSystem_WorkItem_Activity_Library!System.WorkItem.Activity']/Skip$">False</Property>
    <Property Path="$Context/Property[Type='WorkItem!System.WorkItem']/Title$">Execute Orchestrator IR - Autoassign</Property>
    </Object>
    </ObjectTemplate>

Maybe you are looking for