Issue with SelectOneChoice in ADF Table

Hi,
I am trying to create ADF table with a editable columns, one with InputBox and another with SelectionOneChoice. InputBox is working fine but for SelectOneChoice its not populating the value passed to it.
The values of SelectOneChoice are coming from JavaClass. Accesing the list through pageFlowScope.
Code:
*<af:column sortProperty="sponsorPercentage" sortable="false"*
*headerText="#{bindings.sponsor1.hints.sponsorPercentage.label}"*
*id="c11">*
*<af:inputText label="Label 1" id="it5"*
*value="#{row1.sponsorPercentage}"/>*
*</af:column>*
*<af:column id="c1" headerText="Sponsor Status">*
*<af:selectOneChoice label="Label 2" id="sStatus" value="#{row1.sponsorStatusDesc}"*
*validator="#{backingBeanScope.EditSponsorDetails.OnSponsorStatusChange}">*
*<f:selectItems value="#{pageFlowScope.confLists.spStatus}"*
*id="si1"/>*
*</af:selectOneChoice>*
*</af:column>*
In the first column i can see the date in InputBox. But in second column where i am using SelectOneChoice i cannot see data. I can see list of values in SelectOneChoice but unable to populate the data passed to it.
Any idea what i am missing over here?
Thanks in Advance
Regards
Thoom.

This is my code:
<af:column id="c1" headerText="Sponsor Status">
<af:selectOneChoice label="Label 2" id="soc1" value="#{row1.sponsorStatusDesc}"
validator="#{backingBeanScope.EditSponsorDetails.OnSponsorStatusChange}"
valuePassThru="true">
<f:selectItems value="#{pageFlowScope.confLists.spStatus}"
id="si1"/>
</af:selectOneChoice>
</af:column>
and this i what HTML code says..
<select id="confSponsor:r2:0:tbIEEEsp:0:soc1::content" class="x2h" name="confSponsor:r2:0:tbIEEEsp:0:soc1">
<option _adftmpopt="t" value="" title=""></option>
<option value="4" title="Approved">Approved</option>
<option value="3" title="Declined">Declined</option>
<option value="6" title="New">New</option>
<option value="2" title="Not Valid">Not Valid</option>
<option value="5" title="On Hold">On Hold</option>
<option value="1" title="Pending Approval">Pending Approval</option>
<option value="7" title="Unidentified">Unidentified</option>
</select>
Stll i cannot see any value populated in SelectOneChoice

Similar Messages

Issue with creation of ADF Table from ADF Tree selection

Hi,
Following is the usecase.
I've created ParentVO & ChildVO from a single table with view criteria to filter the nodes.And then created two View links ParentToChild & ChildToChild.
Added VOs & corresponding ViewLinks to ApplicationModule. It's got created hierarchy as Parent1->Child1->Chiled2 in Data model section of AM.So Iam done with tree creation process in Model.
As VC can't be applied for sub levels. In order to set the VCs for sublevels, followed the below approach.
Created a bind variable for tree. I've set the VC for both parent & child VOs in managed bean before setting the tree variable in setTree method. So now Iam able to display the required tree in UI with applying VCs.
Now , I can select the required nodes from tree and then click on command button to display the selection list as a table.
In order to achieve this, I tried below two options.
1) Created separate Child VO instance (Child3) from Child VO and applied same view which applied initially. and the dragged the Child3 from Datacontrol to UI(jsff) as a table. When I run the application,it's displaying all the records from the DB table without applying VCs.
2) Dragged the Child2 as a table on UI. When I run the application, it's displaying first record from the table without applying VC.
But no luck in getting the required functionality.
I've Following queries.
a) If we update any transient attribute value for an VO instance, will it effect at VO level or only for that particular instance?
Why because, I've created new instance of same VO. But the changes are not effecting for transient attributes in the new instance of VO.
b) Can some one suggest on my usecase to display the selected nodes from a tree in table format?
I tried my level best to explain the usecase. But let me know,if you have any queries on my usecase.
Thanks in advance,
Samba.

This is my code:
<af:column id="c1" headerText="Sponsor Status">
<af:selectOneChoice label="Label 2" id="soc1" value="#{row1.sponsorStatusDesc}"
validator="#{backingBeanScope.EditSponsorDetails.OnSponsorStatusChange}"
valuePassThru="true">
<f:selectItems value="#{pageFlowScope.confLists.spStatus}"
id="si1"/>
</af:selectOneChoice>
</af:column>
and this i what HTML code says..
<select id="confSponsor:r2:0:tbIEEEsp:0:soc1::content" class="x2h" name="confSponsor:r2:0:tbIEEEsp:0:soc1">
<option _adftmpopt="t" value="" title=""></option>
<option value="4" title="Approved">Approved</option>
<option value="3" title="Declined">Declined</option>
<option value="6" title="New">New</option>
<option value="2" title="Not Valid">Not Valid</option>
<option value="5" title="On Hold">On Hold</option>
<option value="1" title="Pending Approval">Pending Approval</option>
<option value="7" title="Unidentified">Unidentified</option>
</select>
Stll i cannot see any value populated in SelectOneChoice

Performance issues with version enable partitioned tables?

Hi all,
Are there any known performance issues with version enable partitioned tables?
Ive been doing some performance testes with a large version enable partitioned table and it seems that OCB optimiser is choosing very expensive plans during merge operations.
Tanks in advance,
Vitor
Example:
     Object Name     Rows     Bytes     Cost     Object Node     In/Out     PStart     PStop
UPDATE STATEMENT Optimizer Mode=CHOOSE          1          249
UPDATE     SIG.SIG_QUA_IMG_LT
NESTED LOOPS SEMI          1     266     249
PARTITION RANGE ALL                                   1     9
TABLE ACCESS FULL     SIG.SIG_QUA_IMG_LT     1     259     2               1     9
VIEW     SYS.VW_NSO_1     1     7     247
NESTED LOOPS          1     739     247
NESTED LOOPS          1     677     247
NESTED LOOPS          1     412     246
NESTED LOOPS          1     114     244
INDEX RANGE SCAN     WMSYS.MODIFIED_TABLES_PK     1     62     2
INDEX RANGE SCAN     SIG.QIM_PK     1     52     243
TABLE ACCESS BY GLOBAL INDEX ROWID     SIG.SIG_QUA_IMG_LT     1     298     2               ROWID     ROW L
INDEX RANGE SCAN     SIG.SIG_QUA_IMG_PKI$     1          1
INDEX RANGE SCAN     WMSYS.WM$NEXTVER_TABLE_NV_INDX     1     265     1
INDEX UNIQUE SCAN     WMSYS.MODIFIED_TABLES_PK     1     62
/* Formatted on 2004/04/19 18:57 (Formatter Plus v4.8.0) */
UPDATE /*+ USE_NL(Z1) ROWID(Z1) */sig.sig_qua_img_lt z1
SET z1.nextver =
SYS.ltutil.subsversion
(z1.nextver,
SYS.ltutil.getcontainedverinrange (z1.nextver,
'SIG.SIG_QUA_IMG',
'NpCyPCX3dkOAHSuBMjGioQ==',
4574,
4575
4574
WHERE z1.ROWID IN (
(SELECT /*+ ORDERED USE_NL(T1) USE_NL(T2) USE_NL(J2) USE_NL(J3)
INDEX(T1 QIM_PK) INDEX(T2 SIG_QUA_IMG_PKI$)
INDEX(J2 WM$NEXTVER_TABLE_NV_INDX) INDEX(J3 MODIFIED_TABLES_PK) */
t2.ROWID
FROM (SELECT /*+ INDEX(WM$MODIFIED_TABLES MODIFIED_TABLES_PK) */
UNIQUE VERSION
FROM wmsys.wm$modified_tables
WHERE table_name = 'SIG.SIG_QUA_IMG'
AND workspace = 'NpCyPCX3dkOAHSuBMjGioQ=='
AND VERSION > 4574
AND VERSION <= 4575) j1,
sig.sig_qua_img_lt t1,
sig.sig_qua_img_lt t2,
wmsys.wm$nextver_table j2,
(SELECT /*+ INDEX(WM$MODIFIED_TABLES MODIFIED_TABLES_PK) */
UNIQUE VERSION
FROM wmsys.wm$modified_tables
WHERE table_name = 'SIG.SIG_QUA_IMG'
AND workspace = 'NpCyPCX3dkOAHSuBMjGioQ=='
AND VERSION > 4574
AND VERSION <= 4575) j3
WHERE t1.VERSION = j1.VERSION
AND t1.ima_id = t2.ima_id
AND t1.qim_inf_esq_x_tile = t2.qim_inf_esq_x_tile
AND t1.qim_inf_esq_y_tile = t2.qim_inf_esq_y_tile
AND t2.nextver != '-1'
AND t2.nextver = j2.next_vers
AND j2.VERSION = j3.VERSION))

Hello Vitor,
There are currently no known issues with version enabled tables that are partitioned. The merge operation may need to access all of the partitions of a table depending on the data that needs to be moved/copied from the child to the parent. This is the reason for the 'Partition Range All' step in the plan that you provided. The majority of the remaining steps are due to the hints that have been added, since this plan has provided the best performance for us in the past for this particular statement. If this is not the case for you, and you feel that another plan would yield better performance, then please let me know and I will take a look at it.
One suggestion would be to make sure that the table was been recently analyzed so that the optimizer has the most current data about the table.
Performance issues are very hard to fix without a reproducible test case, so it may be advisable to file a TAR if you continue to have significant performance issues with the mergeWorkspace operation.
Thank You,
Ben

ADF Faces - issue with Portal and af table

I wonder if anybody could help me with a problem we are experiencing with running our ADF Faces app inside a portal (NOT Oracle Portal). We are using the af table tag with the rows attribute set as follows:
<af:table emptyText="No items found"
rows="10" banding="row"
bandingInterval="1"
binding="#{backing_ModuleSearchReg.table1}"
id="table1"
var="row">
What this does is if we have more than 10 rows to display it will display
a table header that has a label 'Previous 1-10 of nnn' Next 10. However, when you click on 'Next 10' it produces a Javascript error.
When we run the app outside of the portal we do not get this problem.
I believe this is related to known issues with JSF and Javascript inside a 'framed' web page. But if anybody help me with this or point me to a resource that can help it would be very much appreciated.
Many Thanks in advance.
Chris

Hi,
I remember a similar issue with inner frames that should be fixed in JDeveloper 10.1.3.3. The problem was that the ADF Faces JavaScript did not get the correct document root.
Frank

Problems with refreshing a adf table

Hi,
i am using jdeveloper 11 with the new adf framework.
I use a table which i bind to an arraylist. works fine. the table shows the data from the list.
at sometime i change the backing arraylist but the table show (only in the section i saw on the screen) the old data, when i scroll down the new data is shown.
so i know the arraylist holds the new data and the binding is ok but the refresh of the table doesnt work in the section i see....
hope you understand my problem
hannes

Hi,
As far as I understand , you are not clearing the previous or old data. This results in your table showing the new data towards the end.
If you are using something like this : List tableRows = new ArrayList(); to populate the data in the table , ensure that you clear this list everytime you method runs
You can do this by : tableRows.clear()
HTH
-Shishir

Problems with RowSelection in adf table

I have problems with selection of a row in a adf table. Even though I have set the property : rowSelection="single" , when i select a row, the two other rows that follow, get selected too. For example I have 10 records an when i select the 7th row, the 8th and 9th row are also selected. This doesn't happen with the first rows.
Also when i evaluate an attribute on selectionListener, it is always getting just the one from the first row.
<f:facet name="second">
<af:panelBox id="pbCon" showDisclosure="false" text="Históricos"
binding="#{pageFlowScope.HistoricoEnvios.pbCon}">
<af:table var="row" summary="Histórico de envios"
rows="#{bindings.VOHistoricoEnvios.rangeSize}"
emptyText="#{bindings.VOHistoricoEnvios.viewable ? 'No se encontraron resultados.' : 'Access Denied.'}"
fetchSize="#{bindings.VOHistoricoEnvios.rangeSize}"
rowBandingInterval="0" id="tHist"
disableColumnReordering="true"
value="#{bindings.VOHistoricoEnvios.collectionModel}"
binding="#{pageFlowScope.HistoricoEnvios.thist}"
rowSelection="single">
<af:column width="32" id="c13" align="center"
headerText="#{bindings.VOHistoricoEnvios.hints.Rownum.label}"
rowHeader="unstyled">
.

I have two panelBox, one for a set of options with commandMenuItem and the second one wich shows the result in a table. The first commandMenuItem generate records an show them in the table. Here i got no problem with selection. The third commandMenuItem execute a log of the records generated, here is the problem.
Thes two pages are part o a template, the template has a panelSpliter, in the right are the set of commandMenuItem an in the second is the part that i can edit.
I have also drag an drop from the datacontrol again and have the same result
The table that shows the records is :
<af:panelTabbed id="ptReg" styleClass="AFStretchWidth"
visible="true"
binding="#{pageFlowScope.EnvioSunasa.ptReg}"
partialTriggers="::dpEnv">
<af:showDetailItem text="Datos Personales" id="sdiDp"
stretchChildren="first"
inflexibleHeight="100">
<af:panelSplitter id="psDP" orientation="vertical"
splitterPosition="216">
<f:facet name="first">
<af:panelBox id="pbErrDP"
text="Registros con Error:#{pageFlowScope.EnvioSunasa.numRegErrDP}"
showDisclosure="false">
<af:table var="row" summary="Errores Datos Personales"
rows="#{bindings.VOErrDatosPersonalesAfiliado1.rangeSize}"
emptyText="#{bindings.VOErrDatosPersonalesAfiliado1.viewable ? 'No se encontraron errores.' : 'Access Denied.'}"
fetchSize="#{bindings.VOErrDatosPersonalesAfiliado1.rangeSize}"
rowBandingInterval="0" id="tErrDp"
disableColumnReordering="false"
value="#{bindings.VOErrDatosPersonalesAfiliado1.collectionModel}"
rowSelection="single"
binding="#{pageFlowScope.EnvioSunasa.terrDp}">
.

Issue with input field in table control

Hi,
I have an issue with field acgl_item-rstgr in the table control.
I have created a screen program with a table control.
In the control i have added a dictionary field as acgl_item-rstgr.
When i execute, do f4 on the input field, select a value and press enter, then it is showing me
error as 'Entry 'val' does not exist in T053R (check entry). Its really weird to understand this. I have selected the value
from f4 and even then it says this. Its working for all other columns, but not working only for RSTGR.
Plz help me on this regard.
Code is like this.
TYPES : BEGIN OF ty_rstgr,
rstgr TYPE RSTGR,
END OF ty_rstgr.
TABLES : ACGL_ITEM.
DATA : it_rstgr TYPE TABLE OF ty_rstgr.
DATA : wa_rstgr TYPE ty_rstgr.
CONTROLS : table TYPE TABLEVIEW USING SCREEN 100.
PROCESS BEFORE OUTPUT.
MODULE STATUS_0100.
LOOP AT it_rstgr INTO wa_rstgr WITH CONTROL TABLE.
ENDLOOP.
PROCESS AFTER INPUT.
MODULE USER_COMMAND_0100.
LOOP AT it_rstgr.
ENDLOOP.
Thanks,

Hi Navitha,
Its Check Table concepts for the error u stated. Please check wht the Search help ur using...Because for this field there is no search help at value table level...Use search help that hold all master data or create a custom search field in SE11 level or in program level.
Cheers,
Naveen

Problem with JDev 10g ADF table component and rangeChangeListener

Hi,
I'm populating an ADF table component from a backing bean and would like the range of rows be changed using custom method on the backing bean.
I have declared table on page as shown below and the table is populated correctly. However the onRangeChanged method in the backing bean never fires when
user hits previous or next. Any ideas of what I missed ?.
Thanks,
Kenneth
<af:table emptyText="No items were found"
value="#{companySearchBean.companies}"
var="company" rows="20"
first="#{companySearchBean.firstCompany}"
rendered="#{companySearchBean.queryExecuted}"
rangeChangeListener="#{companySearchBean.onRangeChanged}">
<af:column sortable="false" headerText="Company Name">
<af:outputText value="#{company.partyName}"/>
</af:column>
<af:column sortable="false" headerText="Party Number"
formatType="number">
<af:outputText value="#{company.partyFileNo}"/>
</af:column>
</af:table>

Hi,
I'm populating an ADF table component from a backing bean and would like the range of rows be changed using custom method on the backing bean.
I have declared table on page as shown below and the table is populated correctly. However the onRangeChanged method in the backing bean never fires when
user hits previous or next. Any ideas of what I missed ?.
Thanks,
Kenneth
<af:table emptyText="No items were found"
value="#{companySearchBean.companies}"
var="company" rows="20"
first="#{companySearchBean.firstCompany}"
rendered="#{companySearchBean.queryExecuted}"
rangeChangeListener="#{companySearchBean.onRangeChanged}">
<af:column sortable="false" headerText="Company Name">
<af:outputText value="#{company.partyName}"/>
</af:column>
<af:column sortable="false" headerText="Party Number"
formatType="number">
<af:outputText value="#{company.partyFileNo}"/>
</af:column>
</af:table>

Issue with query involving remote tables

Hi I have a query inside a procedure that has 4 union all statements ,2 of which are based on tables at a remote database.
The query is something like
Select col1, col2, col3…..col n from Table_a, table_b, table c where join condition and certain hard-coded conditions based on run time parameters
Union all
Select col1, col2, col3…..col n from Table_a, table_b , table c where some join condition and certain hard-coded conditions based on run time parameters
Union all
Select col1, col2, col3…..col n from Table_a@remote_db, table_b@remote_db, table c@remote_db where join condition and certain hard-coded conditions based on run time parameters
Union all
Select col1, col2, col3…..col n from Table_a @remote_db, table_b @remote_db, table c@ remote_db where some join condition and certain hard-coded conditions based on run time parameters
The join conditions on the tables are quite good and when executed individually bring data in good time.The queries on the remote database also run fine when I execute them in the remote database.
However when I run this query, it doesn’t get data at all and after hours of running I have to cancel or kill it.I don’t get anything in the long-ops and in the wait class it just shows “SQL*Net message from dblink” or “SQL*Net more data to dblink”.
I thought that there could be some latency issues AND the data retreival over the dblink could be slow, so I tried the /*+driving_site(rmote table alias)*/ hint , after which it comes up in the long ops as its reading from Table a/ table b from my current database but the wait time is something like millions of seconds and it runs forever.
The issue is Table A and Table B both in the remote and the current database are huge tables with at least 40-50 million records in them.
Can anyone suggest an easy way out in this scenario, other than the hard way of re-designing the entire program(which I am afraid I might have to in the end).
Thanks

@metzquar I Put the hint in the unions where I am accessing the remote tables
@blushadow .. i was thinking about that but as these remote tables are in a sort of archived database, I dont think I will be allowed to create a mview.But thats a good suggestion.
@Earth.. I tried that , but the table population itself gets very time consuming
Thanks

Issue with Drag&Drop between table and tree component

I want to drag table rows and drop it on the tree node. I use following code to achieve this:
<af:table value="#{bindings.pricingObjects.collectionModel}"
var="row"
rows="#{bindings.pricingObjects.rangeSize}"
emptyText="#{bindings.pricingObjects.viewable ? 'No data to display.' : 'Access Denied.'}"
fetchSize="#{bindings.pricingObjects.rangeSize}"
selectionListener="#{workspaceBean.onTableSelect}"
rowBandingInterval="0" id="poTable"
partialTriggers=":::csTree :::cbRefresh"
columnStretching="column:c4"
displayRow="selected"
contentDelivery="immediate"
clientComponent="true"
binding="#{workspaceBean.table}"
rowSelection="multiple">
<af:dragSource actions="MOVE" defaultAction="MOVE" discriminant="rowmove"/>
</af:table>
<af:tree value="#{bindings.privateChangeSets.treeModel}"
var="node" displayRow="selected"
selectionListener="#{workspaceBean.onTreeSelect}"
rowSelection="single" id="csTree"
expandAllEnabled="false"
binding="#{workspaceBean.tree}">
<af:dropTarget dropListener="#{workspaceBean.dropListener}" actions="MOVE">
<af:dataFlavor flavorClass="org.apache.myfaces.trinidad.model.RowKeySet"
discriminant="rowmove"/>
</af:dropTarget>
</af:tree>
With this code I am getting the data of dragged rows but I am not able to get the tree node where rows are dropped. Dropevent.getDropSite() always returns NULL.
Strangely, I tried to use deprecated tags <af:collectionDragSource> and <af:collectionDropTarget> and everything works fine. Dropevent.getDropSite() returns me the correct rowkey of tree node.
Any idea why am I not getting desired result with <af:dropTarget>?

Hi,
+" Please note that dropSite==null is a legal value for collection components. dropSite=null and DropOrientation==ON indicates that the drop has happened outside the data portion of the collection component and should be treated as a drop on the entire component Also note that dropSite==null and DropOrientation==AFTER indicates that the drop has happened on an empty collection component and the user intends to append the data."+
http://download.oracle.com/docs/cd/E17904_01/apirefs.1111/e10684/oracle/adf/view/rich/event/DropEvent.html#getDropSite__
List dropRowKey = (List) dropEvent.getDropSite();
        //if no dropsite then drop area was not a data area
        if(dropRowKey == null){
            return DnDAction.NONE;
        }Frank
Edited by: Frank Nimphius on Feb 18, 2011 11:18 PM

Issue with Data binding in Table with Parameters

When we bind the table rows with parameter 'select', the data is not displayed in the table. Check the snippix file created for this issue: url: http://veui5infra.dhcp.wdf.sap.corp:8080/snippix/#70874
But the same parameter works with the odata service:
http://10.66.186.12:8000/OnlineShoppingAnalysis/Services/Analysis_Date_Range.xsodata/Sales_Periodwise?$select=Product_Name,Quantity
Credentials:
user: System
Password: Abcd1234

I'm not able to access your service,so I can't test it.
You could try to do a read operation on your model and add the result to a new JSON model which you can bind on to your table:
var sServiceUrl ="http://services.odata.org/Northwind/Northwind.svc";
var oModel = new sap.ui.model.odata.ODataModel(sServiceUrl);
var oModelJson = new sap.ui.model.json.JSONModel();
oModel.read("/Customers", null, {select: "Product_Name,Quantity"} , true, function(oData, oResponse){
        oModelJson.setData(oData.results);
sap.ui.getCore().setModel(oModelJson, "Model");
    },function(){
        alert("Read failed");});
OpenUI5 SDK - Demo Kit
Documentation/AdvancedTopics/DataBinding/ODataWrite – SAPUI5 Wiki (TIP CORE User Interface)
Kind regards,
Wouter

Deployment issues with SDO-enabled ADF-BC

Hi,
I've got an application with only a model project, which contains an entity obj, it's default view obj and the application module. The view obj and the application module are SDO-enabled. I've created a deployment profile for the project with Deployment Business Component Interface. Also, I've created an EAR profile at aplication level.
However, on deployment to server, I'm getting the following error from JDeveloper when attempting to deploy to a remote server:
Weblogic Server Exception: weblogic.application.ModuleException:
Caused by: weblogic.common.ResourceException: weblogic.common.ResourceException: Could not create pool connection. The DBMS driver exception was: IO Error: The Network Adapter could not establish the connection
See server logs or server console for more details.
weblogic.application.ModuleException:
#### Deployment incomplete. ####
Remote deployment failed (oracle.jdevimpl.deploy.common.Jsr88RemoteDeployer)
The DB is fine however, I've run a simple adf application, and it was working fine.
Attempting to deploy the SDO-enabled ADF-BC onto a domain created in my local ssytem resulted in the followinf error:
[04:26:52 PM] [Deployer:149034]An exception occurred for task [Deployer:149026]deploy application Model_SDO_BC_Profile1 on AdminServer.: Exception preparing module: EJBModule(SDO_BC_Profile1_MiddleTier.jar)
[EJB:011023]An error occurred while reading the deployment descriptor. The error was:
Error processing annotations: ..
[04:26:52 PM] Weblogic Server Exception: weblogic.application.ModuleException: Exception preparing module: EJBModule(SDO_BC_Profile1_MiddleTier.jar)
[EJB:011023]An error occurred while reading the deployment descriptor. The error was:
Error processing annotations: .
[04:26:52 PM] Caused by: weblogic.utils.ErrorCollectionException:
There are 1 nested errors:
weblogic.j2ee.dd.xml.AnnotationProcessException: [EJB:015001]Unable to link class oracle.model.server.serviceinterface.AppModuleServiceImpl in Jar C:\Oracle\Middleware_353947\user_projects\domains\adf_domain\servers\AdminServer\tmp\_WL_user\Model_SDO_BC_Profile1\xmk9vm\SDO_BC_Profile1_MiddleTier.jar : java.lang.NoClassDefFoundError: oracle/model/common/serviceinterface/AppModuleService
See server logs or server console for more details.
weblogic.application.ModuleException: Exception preparing module: EJBModule(SDO_BC_Profile1_MiddleTier.jar)
[EJB:011023]An error occurred while reading the deployment descriptor. The error was:
Error processing annotations: .
#### Deployment incomplete. ####
Remote deployment failed (oracle.jdevimpl.deploy.common.Jsr88RemoteDeployer)
Could anyone please help me out?
Thanks,
Sharmistha

Hi Abhijit,
Thanks for reply. The problem is resolved.
Yes, you are right, i had created the datasource in the weblogic server and also mentioned it into this location : application module > configurations > Edit > jdbc Data source
but still it was showing the error . After that i have deployed the same project using different Jdeveloper(11.1.1.3.0)from different machine and it was successfully deployed and i got my desired webservice. I think there may be problem in Jdeveloper(11.1.1.3.0)
Thanks,
Sharmistha

Issue with child and parnet table

how i can identified that which table is chiald and which one is parent table.

If you are keeping referential integrity in the database, not in the application, it is easy to find the child and parent tables. Here is a quick and dirty query. You can join this to dba_cons_columns to find out on which columns the referential constraints are defined. This lists all child-parent table including SYS and SYSTEM users. You can run this for specific users of course.
select cons1.owner child_owner,cons1.table_name child_table,
cons2.owner parent_owner,cons2.table_name parent_table
from dba_constraints cons1,dba_constraints cons2
where cons1.constraint_type='R'
and cons1.r_constraint_name=cons2.constraint_name;

Issue with buffering of APPL1 table

Hi Experts,
I have changed the Techincal settings of a Ztable to include buffering.
I have selected "Buffering switched on" and "fully buffered" for the same.
But still theres no much difference in the performance of the select query. I executed the job 3 times after the changes,but still its was taking the same time .Please suggest me what all changes i should do to this" technical setting" to make this buffering work for this ztable.
Actually my select query is taking more time to fetch from this table,Becasue of this program takes more than 7500 secs.
below given the changes which i have done to the table.
Dataclass - APPL1
Size Category - 4
Buffering - Buffering switched on.
Buffering type - Fully buffered.
Regrads,
Niranjan

Hi All,
Thank you Experts for valuable reply.
I have to improve the performance of the below given select query .
    select rbukrs
           racct
           rzzfundsect
           rpmax
           hslvt
           hsl01
           hsl02
           hsl03
           hsl04
           hsl05
           hsl06
           hsl07
           hsl08
           hsl09
           hsl10
           hsl11
           hsl12
           hsl13
           hsl14
           hsl15
           hsl16
           drcrk into table it_zzsl01t
      from zzsl01t
    where rldnr      eq c_z1
      and rrcty        eq c_0
      and rvers       eq c_001
      and ryear       eq v_year
      and rtcur        eq p_rtcur
      and rbukrs     eq w_t9s06-bukrs
      and racct       ge w_t9s06-acct_from
      and racct       le w_t9s06-acct_to
      and rpmax     le v_rpmax
      and rzzfundsect eq w_t9s06-zzfundsect.
fields used in the where clause:
Key fields
rldnr ,rrcty,rvers, ryear, rtcur.
Non key fields
racct,rbukrs,rpmax,rzzfundsect.
   Please suggest me some tips to improve its performance
Thanks and Regards,
Niranjan
Edited by: nvive19 on May 5, 2011 9:21 AM
Edited by: nvive19 on May 5, 2011 9:26 AM
Edited by: nvive19 on May 5, 2011 9:28 AM

Having issues with export of a table

Hi All,
We have a very large table which we want the output as .txt or .csv.How should we use
loadercli.Thanks.

Hi Ambarish,
The loader is part of the MaxDB Installation. The loader can be started in a command shell and 'loadercli'.
Here is an example how the loader command can look like:
EXPORT TABLE HOTEL.CITY DATA OUTSTREAM FILE 'HOTEL.CITY.CSV' CSV
Hope this is useful.
Regards,
Deepak Kori

Issue with SelectOneChoice in ADF Table

Similar Messages

Maybe you are looking for