JDBC Problem with Oracle 8.1.7. and OC4J Version 2

I use the following connection statement with Oracle 8.1.7. and JDeveloper 3 and Apache Server. It works fine.
String user = "scott/tiger";
DriverManager.registerDriver(new oracle.jdbc.driver.OracleDriver());
Connection conn = DriverManager.getConnection("jdbc:oracle:oci8:"+user+"@RDL");
The same program does not obtain the connection with JDeveloper 9i, OC4J Version 2 and Oracle 8.1.7. I do not receive any error message, no exception is thrown.
Please help me.

Hi Avi,
I had already tried the thin Diriver but after yout help I try again.
With this thin driver, I received a SQLException which helps me.
As usual, there were a lot of different problems. The main one was that my default configuration do not use the jdbc/lib817 main jdbc/lib. There is a classe12.jar in these libs that are apparently different.
Finally, I obtain the connection with the "thin" driver.
Thank you very much Avi!
Reni

Similar Messages

Remote JDBC Problem with Oracle BPM Studio

Hi all, i am facing the Remote JDBC Problem with Oracle BPM Studio.
When i configure a Remote JDBC Connection for SQL in BPM Studio, it prompt me an error.
The SQL Connection is configured as following :
External Resource:
Name : MyDS
Type : SQL Database
Supported Types : Remote JDBC
Details:
Database Type : BPM's Oracle Driver Version:10, 11
J2EE : WLS
Lookup Name : MyAppDS
Configuration for "WLS"
Name : WLS
Type : J2EE Application Server
Supported Types : GENERIC_J2EE
Details:
Initial Context Factory : weblogic.jndi.WLInitialContextFactory
URL : t3://localhost:7001
But, when i try to connect to the Database by using this configuration, I will get an Exception.
An exception occurred while getting a resource from a connector.
Detail:The connector [[ MyDS : SQL : REMOTE_JDBC ]] caused an exception when getting a resource.
Caused by: An exception occurred while getting a resource from a connector.
Detail:The connector [[ WLS : J2EE : J2EE ]] caused an exception when getting a resource.
Caused by: javax.naming.NoInitialContextException: Cannot instantiate class: weblogic.jndi.WLInitialContextFactory [[ Root exception is java.lang.ClassNotFoundException: weblogic.jndi.WLInitialContextFactory ]]
     at javax.naming.spi.NamingManager.getInitialContext(NamingManager.java:657)
     at javax.naming.InitialContext.getDefaultInitCtx(InitialContext.java:288)
     at javax.naming.InitialContext.init(InitialContext.java:223)
     at javax.naming.InitialContext.<init>(InitialContext.java:197)
     at fuego.jndi.FaultTolerantContext.createContext(FaultTolerantContext.java:726)
     at fuego.jndi.FaultTolerantContext.<init>(FaultTolerantContext.java:79)
     at fuego.connector.impl.GenericJ2EEConnector.createInitialContext(GenericJ2EEConnector.java:177)
     at fuego.connector.impl.GenericJ2EEConnector.createStandaloneContext(GenericJ2EEConnector.java:98)
     at fuego.connector.impl.BaseJ2EEConnector.getResource(BaseJ2EEConnector.java:92)
     at fuego.connector.impl.BaseJ2EEConnector.getResource(BaseJ2EEConnector.java:76)
     at fuego.connector.J2EEHelper.getReadOnlyContext(J2EEHelper.java:86)
     ... 12 more
Edited by: user2262377 on Jun 22, 2009 4:01 PM

I guess the weblogic.jar is not included in the studio.
So, i added weblogic.jar (Weblogic 10.3) and wlclient.jar (Weblogic 10.3)
It is working in my simple java code. But, still not working in BPM Studio.
The error logs:
An exception occurred while getting a resource from a connector.
Detail:The connector [OFT_APP_DS:SQL:REMOTE_JDBC] caused an exception when getting a resource.
Caused by: java.lang.Object cannot be cast to java.io.Serializable
fuego.connector.ConnectorException: An exception occurred while getting a resource from a connector.
Detail:The connector [OFT_APP_DS:SQL:REMOTE_JDBC] caused an exception when getting a resource.
     at fuego.connector.ConnectorException.exceptionOnGetResource(ConnectorException.java:88)
     at fuego.connector.JDBCHelper.getReadOnlyConnection(JDBCHelper.java:93)
     at fuego.sqlintrospector.BrowserPanel.connect(BrowserPanel.java:395)
     at fuego.sqlintrospector.BrowserPanel.populateTree(BrowserPanel.java:200)
     at fuego.ui.wizards.ui.CheckTreeBrowser$1.construct(CheckTreeBrowser.java:63)
     at fuego.ui.SwingWorker$2.run(SwingWorker.java:39)
     at java.lang.Thread.run(Thread.java:619)
Caused by: java.lang.ClassCastException: java.lang.Object cannot be cast to java.io.Serializable
     at weblogic.iiop.IIOPOutputStream.writeAny(IIOPOutputStream.java:1588)
     at weblogic.iiop.IIOPOutputStream.writeObject(IIOPOutputStream.java:2231)
     at weblogic.utils.io.ObjectStreamClass.writeFields(ObjectStreamClass.java:413)
     at weblogic.corba.utils.ValueHandlerImpl.writeValueData(ValueHandlerImpl.java:235)
     at weblogic.corba.utils.ValueHandlerImpl.writeValueData(ValueHandlerImpl.java:225)
     at weblogic.corba.utils.ValueHandlerImpl.writeValue(ValueHandlerImpl.java:182)
     at weblogic.iiop.IIOPOutputStream.write_value(IIOPOutputStream.java:1963)
     at weblogic.iiop.IIOPOutputStream.write_value(IIOPOutputStream.java:2001)
     at weblogic.iiop.IIOPOutputStream.writeObject(IIOPOutputStream.java:2266)
     at weblogic.jdbc.common.internal.RmiDataSource_WLSkel.invoke(Unknown Source)
     at weblogic.rmi.internal.BasicServerRef.invoke(BasicServerRef.java:589)
     at weblogic.rmi.cluster.ClusterableServerRef.invoke(ClusterableServerRef.java:230)
     at weblogic.rmi.internal.BasicServerRef$1.run(BasicServerRef.java:477)
     at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:363)
     at weblogic.security.service.SecurityManager.runAs(Unknown Source)
     at weblogic.rmi.internal.BasicServerRef.handleRequest(BasicServerRef.java:473)
     at weblogic.rmi.internal.wls.WLSExecuteRequest.run(WLSExecuteRequest.java:118)
     at weblogic.work.ExecuteThread.execute(ExecuteThread.java:201)
     at weblogic.work.ExecuteThread.run(ExecuteThread.java:173)

Problem with Oracle Processes - ora_cjq0_ SID and ora_qmnc_ SID

Hello,
We are having problem with few Oracle Processes which are failing by themselves and also cosuming high CPU load. Few of the Processes are :
ora_cjq0_<SID>
ora_qmnc_<SID>
I did not find any relevant SAP Note about the above two Processes.
Could you please throw some light on the above two processes? Will they stop being acitve once their work is done?
Thanks,
Subbu

subbarayudu panguluri wrote:
Hello,
>
> One more info. to add apart my previous post is I am seeing a WARNING in all the User trace files as below:
>
> WARNING:Could not lower the asynch I/O limit to 144 for SQL direct I/O. It is set to -1
>
> Is this warnign to be considered? I googled about the above error but couldnt get any hint..
>
> Thanks,
> Subbu
Hi Subbu,
You hit the bug 8412426 "WARNING:Could not lower the asynch I/O limit" messages. Check the document, below;
https://support.oracle.com/CSP/main/article?cmd=show&type=NOT&doctype=PATCH&id=8412426.8&addClickInfo=<data search_text="%22Could%20not%20lower%20the%20asynch%20I/O%20limit%22" search_result_size="16" search_result_count="16" powerview_id="" on_off="off" item_position_in_list="1"/>
As far as I understand that this bug has no side effect, except filling your trace file, consequently the storage. Oracle suggest upgrade to 11g.
Best regards,
Orkun Gedik

Problem with Oracle 8.1.7 and JDBC

Im connecting to Oracle 8.1.7 (running on a MS Windows Server) from a JBoss 2.4.10,
running on a Linux box. The code that generates the problem looks like this :
String query = "SELECT some_fields FROM some_table WHERE id = ?";
Prepared Statement ps = conn.prepareStatement(query);
ps.setString(1, id.toString());
ps.executeQuery(); // this throws the folowing exception
java.sql.SQLException: Zamkni?ta instrukcja
at oracle.jdbc.dbaccess.DBError.throwSqlException(DBError.java:169)
at oracle.jdbc.dbaccess.DBError.throwSqlException(DBError.java:211)
at oracle.jdbc.dbaccess.DBError.throwSqlException(DBError.java:274)
at oracle.jdbc.driver.OracleStatement.ensureOpen(OracleStatement.java:49
35)
at oracle.jdbc.driver.OraclePreparedStatement.executeUpdate(OraclePrepar
edStatement.java:382)
at oracle.jdbc.driver.OraclePreparedStatement.executeQuery(OraclePrepare
dStatement.java:339)
at org.jboss.pool.jdbc.PreparedStatementInPool.executeQuery(PreparedStat
ementInPool.java:71)
The connection is ok. The statement is not closed or anything. The syntax of the query is ok, because i tested it on the Oracle console. What is
strange, is that this exception is thrown only some times. What I mean is that
regardles of the id parameter, the execution of this query some times throws
an excpetion, and some times not, without any special patern.
I will be gratefull for all help
MIchal
GG : #2814355
e-mail : mailto:[email protected]
fotoWWW : http://foto.natolin.net
bikeWWW : http://rowery.natolin.net (under construction)

ID is a NUMBER and id.toString() is not a number, for
example it ca be a null reference.
well we tryed also this version :
ps.setLong(1, id.longValue());
moreover the exception wasn't thrown for the value of id :56 but was thrown for the value of id : 88. Hence I think it is a case of something other than my code.
michal

Problem with oracle.jbo.domain.Date and format 'dd.MM.yyyy'

JBO-25009: Cannot create an object of type:oracle.jbo.domain.Date with value: 09.10.2003
In EOImplMsgBundle :
{"Dbeg_FMT_FORMATTER", "oracle.jbo.format.DefaultDateFormatter"},
{"Dbeg_FMT_FORMAT", "dd.MM.yyyy"}};
In VOImplMsgBundle :
{"Dbeg_FMT_FORMAT", "dd.MM.yyyy"},
{"Dbeg_FMT_FORMATTER", "oracle.jbo.format.DefaultDateFormatter"},
Why ? Help Please

I have the same problem !
I have extended the formatinfo.xml with:
<DOMAIN CLASS="oracle.jbo.domain.Date">
<FORMATTER name="Simple Date" class="oracle.jbo.format.DefaultDateFormatter">
<FORMAT text="dd.MM.yyyy" />
<FORMAT text="dd-MM-yyyy" />
<FORMAT text="yyyy-MM-dd" />
<FORMAT text="yyyy-MM-dd G 'at' hh:mm:ss" />
<FORMAT text="EEE, MMM d, ''yy" />
</FORMATTER>
</DOMAIN>
And then I have set my attibutes to use this FORMATTER with FORMAT "dd.MM.yyyy".
When I start my application, I became an error and the date-fields are blank ... The application can not convert my Date in 'dd.MM.yyyy' format ...
When I set my attributes to Format Type <none>, it works, the date-fields are present ...

Problems with Oracle 8.1.5. and Patch (on Debian Linux)

Hello,
I just installed Oracle 8.1.5 on Debian (Potato; glibc 2.1)
Linux. When I try to run SQL*Plus I get the following error:
./sqlplus: error in loading shared libraries:
/home/oracle/product/8.1.5./lib/libclntsh.so.8.0: undefined
symbol: nauzaoss
So I downloaded the patch and installed it. Due installation
of the patch I get several errors:
cat: /home/oracle/product/8.1.5./network/lib/ldflags: No such
file or directory
/home/oracle/product/8.1.5./lib/nautab.o(.rodata+0x8): undefined
reference to `n
auzaoss'
/home/oracle/product/8.1.5./lib//libpls8.a(spssimb.o): In
function `pss_gets':
spssimb.o(.text+0x303): the `gets' function is dangerous and
should not be used.
/home/oracle/product/8.1.5./lib/nautab.o(.rodata+0x8): undefined
reference to `n
auzaoss'
/home/oracle/product/8.1.5./lib//libn8.a(nnfu.o): In function
`nnfun2a':
nnfu.o(.text+0x3d3): undefined reference to `nnfotrv1'
/home/oracle/product/8.1.5./lib//libn8.a(nnfgt.o)(.rodata+0x4):
undefined refere
nce to `nnftboot'
Can anyone help?
Ansgar
null

Ansgar Scherp (guest) wrote:
: Hello,
: I just installed Oracle 8.1.5 on Debian (Potato; glibc 2.1)
: Linux. When I try to run SQL*Plus I get the following error:
: ./sqlplus: error in loading shared libraries:
: /home/oracle/product/8.1.5./lib/libclntsh.so.8.0: undefined
: symbol: nauzaoss
: So I downloaded the patch and installed it. Due installation
: of the patch I get several errors:
: cat: /home/oracle/product/8.1.5./network/lib/ldflags: No such
: file or directory
: /home/oracle/product/8.1.5./lib/nautab.o(.rodata+0x8):
undefined
: reference to `n
: auzaoss'
: /home/oracle/product/8.1.5./lib//libpls8.a(spssimb.o): In
: function `pss_gets':
: spssimb.o(.text+0x303): the `gets' function is dangerous and
: should not be used.
: /home/oracle/product/8.1.5./lib/nautab.o(.rodata+0x8):
undefined
: reference to `n
: auzaoss'
: /home/oracle/product/8.1.5./lib//libn8.a(nnfu.o): In function
: `nnfun2a':
: nnfu.o(.text+0x3d3): undefined reference to `nnfotrv1'
: /home/oracle/product/8.1.5./lib//libn8.a(nnfgt.o)(.rodata+0x4):
: undefined refere
: nce to `nnftboot'
: Can anyone help?
: Ansgar
On RH 6.0, there is a file called /etc/ld.so.conf which should
contain all directories searched by ld.so, extept /lib and
/usr/lib. Add $ORACLE_HOME/lib to that file and run ldconf
as root.
null

Problem with oracle webcenter 11g installation and configuration

I have installed weblogic and webcenter successfully.After that I have configured the webcenter by creating new domain using configuration wizard . Three managed servers created for spaces, services and portlets and able to bring up. The problem is webcenter and other service related applications are in failed state. In server stage no ear or war files related to these applications. So unable to access webcenter spaces. Only weblogic console and webcenter enterprise manager can be accessed.No clue from installation document.
Is anything to do to make it to active state?
Edited by: user10303069 on Oct 7, 2009 12:18 AM

Problem solved. Simply two more steps required. First, In the nodemanager.properties Edit as StartScriptEnabled=true and start the node manager and then Admin server. Second step is start the WLS_Spaces managed server from webcenter Enterprise Manager. Now spaces is accessible.

Problems with Safari 7.0.6 and older versions

When I visit the site of my school (http://www.adelbert.nl) I don't see all the fotos. From the 15, 6 are missing. In any other browser (except Webkit) everything looks fine.
What did I try: reset Safari; restart; delele plists; log in as an other user. Nothing helps. The strange thing is that occasionally everything works, but after a reload it's wrong again..
I have the same problem on my own site: http://www.jackvans.nl/PlekvanJack/Zomer/Sasbachwalden-Engel.html.
Any clues, thank you!

1. This procedure is a diagnostic test. It changes nothing, for better or worse, and therefore will not, in itself, solve the problem. But with the aid of the test results, the solution may take a few minutes, instead of hours or days.
Don't be put off merely by the seeming complexity of these instructions. The process is much less complicated than the description. You do harder tasks with the computer all the time.
2. If you don't already have a current backup, back up all data before doing anything else. The backup is necessary on general principle, not because of anything in the test procedure. Backup is always a must, and when you're having any kind of trouble with the computer, you may be at higher than usual risk of losing data, whether you follow these instructions or not.
There are ways to back up a computer that isn't fully functional. Ask if you need guidance.
3. Below are instructions to run a UNIX shell script, a type of program. As I wrote above, it changes nothing. It doesn't send or receive any data on the network. All it does is to generate a human-readable report on the state of the computer. That report goes nowhere unless you choose to share it. If you prefer, you can read it yourself without disclosing the contents to me or anyone else.
You should be wondering whether you can believe me, and whether it's safe to run a program at the behest of a stranger. In general, no, it's not safe and I don't encourage it.
In this case, however, there are a couple of ways for you to decide whether the program is safe without having to trust me. First, you can read it. Unlike an application that you download and click to run, it's transparent, so anyone with the necessary skill can verify what it does.
You may not be able to understand the script yourself. But variations of the script have been posted on this website thousands of times over a period of years. The site is hosted by Apple, which does not allow it to be used to distribute harmful software. Any one of the millions of registered users could have read the script and raised the alarm if it was harmful. Then I would not be here now and you would not be reading this message.
Nevertheless, if you can't satisfy yourself that these instructions are safe, don't follow them. Ask for other options.
4. Here's a summary of what you need to do, if you choose to proceed:
☞ Copy a line of text in this window to the Clipboard.
☞ Paste into the window of another application.
☞ Wait for the test to run. It usually takes a few minutes.
☞ Paste the results, which will have been copied automatically, back into a reply on this page.
The sequence is: copy, paste, wait, paste again. You don't need to copy a second time. Details follow.
5. You may have started the computer in "safe" mode. Preferably, these steps should be taken in “normal” mode, under the conditions in which the problem is reproduced. If the system is now in safe mode and works well enough in normal mode to run the test, restart as usual. If you can only test in safe mode, do that.
6. If you have more than one user, and the one affected by the problem is not an administrator, then please run the test twice: once while logged in as the affected user, and once as an administrator. The results may be different. The user that is created automatically on a new computer when you start it for the first time is an administrator. If you can't log in as an administrator, test as the affected user. Most personal Macs have only one user, and in that case this section doesn’t apply. Don't log in as root.
7. The script is a single long line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, though you may not see all of it in the browser window, and you can then copy it. If you try to select the line by dragging across the part you can see, you won't get all of it.
Triple-click anywhere in the line of text below on this page to select it:
PATH=/usr/bin:/bin:/usr/sbin:/sbin:/usr/libexec;clear;cd;p=(Software Hardware Memory Diagnostics Power FireWire Thunderbolt USB Fonts SerialATA 4 1000 25 5120 KiB/s 1024 85 \\b%% 20480 1 MB/s 25000 ports ' com.clark.\* \*dropbox \*GoogleDr\* \*k.AutoCAD\* \*k.Maya\* vidinst\* ' DYLD_INSERT_LIBRARIES\ DYLD_LIBRARY_PATH -86 "` route -n get default|awk '/e:/{print $2}' `" 25 N\\/A down up 102400 25600 recvfrom sendto CFBundleIdentifier 25 25 25 1000 MB com.apple.AirPortBaseStationAgent 464843899 51 5120 files );N5=${#p[@]};p[N5]=` networksetup -listnetworkserviceorder|awk ' NR>1 { sub(/^$[0-9]+$ /,"");n=$0;getline;} $NF=="'${p[26]}')" { sub(/.$/,"",$NF);print n;exit;} ' `;f=('\n%s: %s\n' '\n%s\n\n%s\n' '\nRAM details\n%s\n' %s\ %s '%s\n-\t%s\n' );S0() { echo ' { q=$NF+0;$NF="";u=$(NF-1);$(NF-1)="";gsub(/^ +| +$/,"");if(q>='${p[$1]}') printf("%s (UID %s) is using %s '${p[$2]}'",$0,u,q);} ';};s=(' /^ *$|CSConfigDot/d;s/^ */ /;s/[-0-9A-Fa-f]{22,}/UUID/g;s/(ochat)\.[^.]+(\..+)/\1\2/;/Shared/!s/\/Users\/[^/]+/~/g ' ' s/^ +//;/de: S|[nst]:/p;' ' {sub(/^ +/,"")};/er:/;/y:/&&$2<'${p[10]} ' 1s/://;3,6d;/[my].+:/d;s/^ {4}//;H;${ g;s/\n$//;/s: [^EO]|x([^08]|02[^F]|8[^0])/p;} ' ' 5h;6{ H;g;/P/!p;} ' ' ($1~/^Cy/&&$3>'${p[11]}')||($1~/^Cond/&&$2!~/^N/) ' ' /:$/{ N;/:.+:/d;s/ *://;b0'$'\n'' };/^ *(V.+ [0N]|Man).+ /{ s/ 0x.... //;s/[()]//g;s/(.+: )(.+)/ (\2)/;H;};$b0'$'\n'' d;:0'$'\n'' x;s/\n\n//;/Apple[ ,]|Genesy|Intel|SMSC/d;s/\n.*//;/\)$/p;' ' s/^.*C/C/;H;${ g;/No th|pms/!p;} ' '/= [^GO]/p' '{$1=""};1' ' /Of/!{ s/^.+is |\.//g;p;} ' ' $0&&!/ / { n++;print;} END { if(n<200) print "com.apple.";} ' ' $3~/[0-9]:[0-9]{2}$/ { gsub(/:[0-9:a-f]{14}/,"");} { print|"tail -n'${p[12]}'";} ' ' NR==2&&$4<='${p[13]}' { print $4;} ' ' END { $2/=256;if($2>='${p[15]}') print int($2) } ' ' NR!=13{next};{sub(/[+-]$/,"",$NF)};'"`S0 21 22`" 'NR!=2{next}'"`S0 37 17`" ' NR!=5||$8!~/[RW]/{next};{ $(NF-1)=$1;$NF=int($NF/10000000);for(i=1;i<=3;i++){$i="";$(NF-1-i)="";};};'"`S0 19 20`" 's:^:/:p' '/\.kext\/(Contents\/)?Info\.plist$/p' 's/^.{52}(.+) <.+/\1/p' ' /Launch[AD].+\.plist$/ { n++;print;} END { print "'${p[41]}'";if(n<200) print "/System/";} ' '/\.xpc\/(Contents\/)?Info\.plist$/p' ' NR>1&&!/0x|\.[0-9]+$|com\.apple\.launchctl\.(Aqua|Background|System)$|'${p[41]}'/ { print $3;} ' ' /\.(framew|lproj)|\):/d;/plist:|:.+(Mach|scrip)/s/:[^:]+//p ' '/^root$/p' ' !/\/Contents\/.+\/Contents|Applic|Autom|Frameworks/&&/Lib.+\/Info.plist$/ { n++;print;} END { if(n<1100) print "/System/";} ' '/^\/usr\/lib\/.+dylib$/p' ' /Temp|emac/{next};/(etc|Preferences|Launch[AD].+)\// { sub(".(/private)?","");n++;print;} END { print "'${p[41]}'.plist\t'${p[42]}'";if(n<500) print "Launch";} ' ' /\/(Contents\/.+\/Contents|Frameworks)\/|\.wdgt\/.+\.([bw]|plu)/d;p;' 's/\/(Contents\/)?Info.plist$//;p' ' { gsub("^| |\n","\\|\\|kMDItem'${p[35]}'=");sub("^...."," ") };1 ' p '{print $3"\t"$1}' 's/\'$'\t''.+//p' 's/1/On/p' '/Prox.+: [^0]/p' '$2>'${p[43]}'{$2=$2-1;print}' ' BEGIN { i="'${p[26]}'";M1='${p[16]}';M2='${p[18]}';M3='${p[31]}';M4='${p[32]}';} !/^A/{next};/%/ { getline;if($5<M1) a="user "$2"%, system "$4"%";} /disk0/&&$4>M2 { b=$3" ops/s, "$4" blocks/s";} $2==i { if(c) { d=$3+$4+$5+$6;next;};if($4>M3||$6>M4) c=int($4/1024)" in, "int($6/1024)" out";} END { if(a) print "CPU: "a;if(b) print "I/O: "b;if(c) print "Net: "c" (KiB/s)";if(d) print "Net errors: "d" packets/s";} ' ' /r\[0\] /&&$NF!~/^1(0|72\.(1[6-9]|2[0-9]|3[0-1])|92\.168)\./ { print $NF;exit;} ' ' !/^T/ { printf "(static)";exit;} ' '/apsd|BKAg|OpenD/!s/:.+//p' ' (/k:/&&$3!~/(255\.){3}0/ )||(/v6:/&&$2!~/A/ ) ' ' $1~"lR"&&$2<='${p[25]}';$1~"li"&&$3!~"wpa2";' ' BEGIN { FS=":";p="uniq -c|sed -E '"'s/ +\$[0-9]+\$\$.+\$/\\\2 x\\\1/;s/x1$//'"'";} { n=split($3,a,".");sub(/_2[01].+/,"",$3);print $2" "$3" "a[n]$1|p;b=b$1;} END { close(p) if(b) print("\n\t* Code injection");} ' ' NR!=4{next} {$NF/=10240} '"`S0 27 14`" ' END { if($3~/[0-9]/)print$3;} ' ' BEGIN { L='${p[36]}';} !/^[[:space:]]*(#.*)?$/ { l++;if(l<=L) f=f"\n "$0;} END { F=FILENAME;if(!F) exit;if(!f) f="\n [N/A]";"file -b "F|getline T;if(T!~/^(AS.+ (En.+ )?text$|(Bo|PO).+ sh.+ text ex)/) F=F" ("T")";printf("\nContents of %s\n%s\n",F,f);if(l>L) printf("\n ...and %s more line(s)\n",l-L);} ' ' /^ +[NP].+ =/h;/^( +D.+[{]|[}])/{ g;s/.+= //p;};' 's/0/Off/p' ' END{print NR} ' ' /id: N|te: Y/{i++} END{print i} ' ' / / { print "'"${p[28]}"'";exit;};1;' '/ en/!s/\.//p' ' NR!=13{next};{sub(/[+-M]$/,"",$NF)};'"`S0 39 40`" ' $10~/$L/&&$9!~"localhost" { sub(/.+:/,"",$9);print $1": "$9;} ' '/^ +r/s/.+"(.+)".+/\1/p' 's/(.+\.wdgt)\/(Contents\/)?Info\.plist$/\1/p' 's/^.+\/(.+)\.wdgt$/\1/p' ' /l: /{ /DVD/d;s/.+: //;b0'$'\n'' };/s: /{ /V/d;s/^ */- /;H;};$b0'$'\n'' d;:0'$'\n'' x;/APPLE [^:]+$/d;p;' ' /^find: /d;p;' "`S0 44 45`" );c1=(system_profiler pmset\ -g nvram fdesetup find syslog df vm_stat sar ps sudo\ crontab sudo\ iotop top pkgutil 'PlistBuddy 2>&1 -c "Print' whoami cksum kextstat launchctl sudo\ launchctl crontab 'sudo defaults read' stat lsbom mdfind ' for i in ${p[24]};do ${c1[18]} ${c2[27]} $i;done;' defaults\ read scutil sudo\ dtrace sudo\ profiles sed\ -En awk /S*/*/P*/*/*/C*/*/airport networksetup mdutil sudo\ lsof test );c2=(com.apple.loginwindow\ LoginHook '" /L*/P*/loginw*' '" L*/P*/*loginit*' 'L*/Ca*/com.ap*.Saf*/E*/* -d 1 -name In*t -exec '"${c1[14]}"' :CFBundleDisplayName" {} \;|sort|uniq' '~ $TMPDIR.. \( -flags +sappnd,schg,uappnd,uchg -o ! -user $UID -o ! -perm -600 $' '.??* -path .Trash -prune -o -type d -name *.app -print -prune' :${p[35]}\" :Label\" '{/,}L*/{Con,Pref}* -type f ! -size 0 -name *.plist -exec plutil -s {} \;' "-f'%N: %l' Desktop L*/Keyc*" therm sysload boot-args status " -F '\$Time \$Message' -k Sender kernel -k Message Req 'bad |Beac|caug|dead[^bl]|FAIL|fail|GPU |hfs: Ru|inval|jnl:|last value [1-9]|n Cause: -|NVDA$|pagin|proc: t|Roamed|rror|ssert|Thrott|tim(ed? ?|ing )o|WARN' -k Message Rne 'Goog|ksadm|SMC:| VALI|xpma' -o -k Sender fseventsd -k Message Req 'SL' " '-du -n DEV -n EDEV 1 10' 'acrx -o comm,ruid,%cpu' '-t1 10 1' '-f -pfc /var/db/r*/com.apple.*.{BS,Bas,Es,J,OSXU,Rem,up}*.bom' '{/,}L*/Lo*/Diag* -type f -regex .\*[cgh] ! -name *ag \( -exec grep -lq "^Thread c" {} \; -exec printf \* \; -o -true $ -execdir stat -f:%Sc:%N -t%F {} \;|sort -t: -k2 |tail -n'${p[38]} '-L {/{S*/,},}L*/Lau* -type f' '-L /{S*/,}L*/StartupItems -type f -exec file {} +' '-L /S*/L*/{C*/Sec*A,E}* {/,}L*/{A*d,Ca*/*/Ex,Co{mpon,reM},Ex,Inter,iTu*/*P,Keyb,Mail/B,Pr*P,Qu*T,Scripti,Sec,Servi,Spo,Widg}* -path \\*s/Resources -prune -o -type f -name Info.plist' '/usr/lib -type f -name *.dylib' `awk "${s[31]}"<<<${p[23]}` "/e*/{auto,{cron,fs}tab,hosts,{[lp],sy}*.conf,pam.d/*,ssh{,d}_config,*.local} {,/usr/local}/etc/periodic/*/* /L*/P*{,/*}/com.a*.{Bo,sec*.ap}*t /S*/L*/Lau*/*t .launchd.conf" list getenv /Library/Preferences/com.apple.alf\ globalstate --proxy '-n get default' -I --dns -getdnsservers\ "${p[N5]}" -getinfo\ "${p[N5]}" -P -m\ / '' -n1 '-R -l1 -n1 -o prt -stats command,uid,prt' '--regexp --only-files --files com.apple.pkg.*|sort|uniq' -kl -l -s\ / '-R -l1 -n1 -o mem -stats command,uid,mem' '+c0 -i4TCP:0-1023' com.apple.dashboard\ layer-gadgets '-d /L*/Mana*/$USER&&echo On' '-app Safari WebKitDNSPrefetchingEnabled' "+c0 -l|awk '{print(\$1,\$3)}'|sort|uniq -c|sort -n|tail -1|awk '{print(\$2,\$3,\$1)}'" );N1=${#c2[@]};for j in {0..9};do c2[N1+j]=SP${p[j]}DataType;done;N2=${#c2[@]};for j in 0 1;do c2[N2+j]="-n ' syscall::'${p[33+j]}':return { @out[execname,uid]=sum(arg0) } tick-10sec { trunc(@out,1);exit(0);} '";done;l=(Restricted\ files Hidden\ apps 'Elapsed time (s)' POST Battery Safari\ extensions Bad\ plists 'High file counts' User Heat System\ load boot\ args FileVault Diagnostic\ reports Log 'Free space (MiB)' 'Swap (MiB)' Activity 'CPU per process' Login\ hook 'I/O per process' Mach\ ports kexts Daemons Agents launchd Startup\ items Admin\ access Root\ access Bundles dylibs Apps Font\ issues Inserted\ dylibs Firewall Proxies DNS TCP/IP Wi-Fi Profiles Root\ crontab User\ crontab 'Global login items' 'User login items' Spotlight Memory Listeners Widgets Parental\ Controls Prefetching SATA Descriptors );N3=${#l[@]};for i in 0 1 2;do l[N3+i]=${p[5+i]};done;N4=${#l[@]};for j in 0 1;do l[N4+j]="Current ${p[29+j]}stream data";done;A0() { id -G|grep -qw 80;v[1]=$?;((v[1]==0))&&sudo true;v[2]=$?;v[3]=`date +%s`;clear >&-;date '+Start time: %T %D%n';};for i in 0 1;do eval ' A'$((1+i))'() { v=` eval "${c1[$1]} ${c2[$2]}"|'${c1[30+i]}' "${s[$3]}" `;[[ "$v" ]];};A'$((3+i))'() { v=` while read i;do [[ "$i" ]]&&eval "${c1[$1]} ${c2[$2]}" \"$i\"|'${c1[30+i]}' "${s[$3]}";done<<<"${v[$4]}" `;[[ "$v" ]];};A'$((5+i))'() { v=` while read i;do '${c1[30+i]}' "${s[$1]}" "$i";done<<<"${v[$2]}" `;[[ "$v" ]];};';done;A7(){ v=$((`date +%s`-v[3]));};B2(){ v[$1]="$v";};for i in 0 1;do eval ' B'$i'() { v=;((v['$((i+1))']==0))||{ v=No;false;};};B'$((3+i))'() { v[$2]=`'${c1[30+i]}' "${s[$3]}"<<<"${v[$1]}"`;} ';done;B5(){ v[$1]="${v[$1]}"$'\n'"${v[$2]}";};B6() { v=` paste -d: <(printf "${v[$1]}") <(printf "${v[$2]}")|awk -F: ' {printf("'"${f[$3]}"'",$1,$2)} ' `;};B7(){ v=`grep -Fv "${v[$1]}"<<<"$v"`;};C0(){ [[ "$v" ]]&&echo "$v";};C1() { [[ "$v" ]]&&printf "${f[$1]}" "${l[$2]}" "$v";};C2() { v=`echo $v`;[[ "$v" != 0 ]]&&C1 0 $1;};C3() { v=`sed -E "$s"<<<"$v"`&&C1 1 $1;};for i in 1 2;do for j in 0 2 3;do eval D$i$j'(){ A'$i' $1 $2 $3; C'$j' $4;};';done;done;{ A0;D20 0 $((N1+1)) 2;D10 0 $N1 1;B0;C2 27;B0&&! B1&&C2 28;D12 15 37 25 8;A1 0 $((N1+2)) 3;C0;D13 0 $((N1+3)) 4 3;D23 0 $((N1+4)) 5 4;D13 0 $((N1+9)) 59 50;for i in 0 1 2;do D13 0 $((N1+5+i)) 6 $((N3+i));done;D13 1 10 7 9;D13 1 11 8 10;D22 2 12 9 11;D12 3 13 10 12;D23 4 19 44 13;D23 5 14 12 14;D22 6 36 13 15;D22 7 37 14 16;D23 8 15 38 17;D22 9 16 16 18;B1&&{ D22 35 49 61 51;D22 11 17 17 20;for i in 0 1;do D22 28 $((N2+i)) 45 $((N4+i));done;};D22 12 44 54 45;D22 12 39 15 21;A1 13 40 18;B2 4;B3 4 0 19;A3 14 6 32 0;B4 0 5 11;A1 17 41 20;B7 5;C3 22;B4 4 6 21;A3 14 7 32 6;B4 0 7 11;B3 4 0 22;A3 14 6 32 0;B4 0 8 11;B5 7 8;B1&&{ A2 19 26 23;B7 7;C3 23;};A2 18 26 23;B7 7;C3 24;A2 4 20 21;B7 6;B2 9;A4 14 7 52 9;B2 10;B6 9 10 4;C3 25;D13 4 21 24 26;B4 4 12 26;B3 4 13 27;A1 4 22 29;B7 12;B2 14;A4 14 6 52 14;B2 15;B6 14 15 4;B3 0 0 30;C3 29;A1 4 23 27;B7 13;C3 30;D13 24 24 32 31;D13 25 37 32 33;A2 23 18 28;B2 16;A2 16 25 33;B7 16;B3 0 0 34;B2 21;A6 47 21&&C0;B1&&{ D13 21 0 32 19;D13 10 42 32 40;D22 29 35 46 39;};D13 14 1 48 42;D12 34 43 53 44;D22 0 $((N1+8)) 51 32;D13 4 8 41 6;D12 26 28 35 34;D13 27 29 36 35;A2 27 32 39&&{ B2 19;A2 33 33 40;B2 20;B6 19 20 3;};C2 36;D23 33 34 42 37;B1&&D23 35 45 55 46;D23 32 31 43 38;D12 36 47 32 48;D13 20 42 32 41;D13 14 2 48 43;D13 4 5 32 1;D13 4 3 60 5;D12 26 48 49 49;B3 4 22 57;A1 26 46 56;B7 22;B3 0 0 58;C3 47;D22 4 4 50 0;D23 22 9 37 7;A7;C2 2;} 2>/dev/null|pbcopy;exit 2>&-
Copy the selected text to the Clipboard by pressing the key combination command-C.
8. Launch the built-in Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Click anywhere in the Terminal window and paste by pressing command-V. The text you pasted should vanish immediately. If it doesn't, press the return key.
9. If you see an error message in the Terminal window such as "Syntax error" or "Event not found," enter
exec bash
and press return. Then paste the script again.
10. If you're logged in as an administrator, you'll be prompted for your login password. Nothing will be displayed when you type it. You will not see the usual dots in place of typed characters. Make sure caps lock is off. Type carefully and then press return. You may get a one-time warning to be careful. If you make three failed attempts to enter the password, the test will run anyway, but it will produce less information. In most cases, the difference is not important. If you don't know the password, or if you prefer not to enter it, press the key combination control-C or just press return three times at the password prompt. Again, the script will still run.
If you're not logged in as an administrator, you won't be prompted for a password. The test will still run. It just won't do anything that requires administrator privileges.
11. The test may take a few minutes to run, depending on how many files you have and the speed of the computer. A computer that's abnormally slow may take longer to run the test. While it's running, there will be nothing in the Terminal window and no indication of progress. Wait for the line
[Process completed]
to appear. If you don't see it within half an hour or so, the test probably won't complete in a reasonable time. In that case, close the Terminal window and report what happened. No harm will be done.
12. When the test is complete, quit Terminal. The results will have been copied to the Clipboard automatically. They are not shown in the Terminal window. Please don't copy anything from there. All you have to do is start a reply to this comment and then paste by pressing command-V again.
At the top of the results, there will be a line that begins with the words "Start time." If you don't see that, but instead see a mass of gibberish, you didn't wait for the "Process completed" message to appear in the Terminal window. Please wait for it and try again.
If any private information, such as your name or email address, appears in the results, anonymize it before posting. Usually that won't be necessary.
13. When you post the results, you might see an error message on the web page: "You have included content in your post that is not permitted," or "You are not authorized to post." That's a bug in the forum software. Please post the test results on Pastebin, then post a link here to the page you created.
14. This is a public forum, and others may give you advice based on the results of the test. They speak only for themselves, and I don't necessarily agree with them.
Copyright © 2014 by Linc Davis. As the sole author of this work, I reserve all rights to it except as provided in the Use Agreement for the Apple Support Communities website ("ASC"). Readers of ASC may copy it for their own personal use. Neither the whole nor any part may be redistributed.

Problem with ORACLE database

Hi all,
I am facing some problem with ORACLE database while configuring one JDBC scenario in the receiver side. I have configured one JDBC scenario like FILE TO JDBC. As JDBC is at receiver side i have provided the input file with the following format ,
<root>
<StatementName1>
     <dbTableName action="INSERT">
         <table>employee</table>
          <access>
                <flag>NO</flag>
                <ID>567</ID>
         <NAME>134</NAME>
             </access>
     </dbTableName>
</StatementName1>
</root>
But in the ORACLE database all my columns are in the uppercase.
So when i have tried to send this input file to process through JDBC receiver side then i have faced the below error :
FATAL ERROR: Column 'flag' does not exist in table 'employee'
Then I have tried to check with sender side processing of JDBC adapter. By using the SQL statements as
SELECT * FROM EMPLOYEE WHERE flag='NO'
UPDATE EMPLOYEE SET Flag='YES' WHERE flag='NO'
Here it worked fine.
Now my question is,
If the same adapter is working when we are writing a query directly(sender side), then we must also allow case independence in the auto generated SQL part(receiver side).
The JDBC drivers for both SQL server and Oracle, supports the same java code, for accessing the DB, irrespective of the case of the column names.
Please clarify this doubt as soon as possible.
Thanks,
Soorya.

Hi Dharmaveer,
When I go with the following input file,
<root>
<StatementName1>
     <dbTableName action="INSERT">
         <table>EMPLOYEE</table>
          <access>
                <FLAG>NO</FLAG>
                <ID>666</ID>
                <NAME>SSS</NAME>
             </access>
         </dbTableName>
</StatementName1>
</root>
I will get the following query with succesfull processing.
INSERT INTO EMPLOYEE (FLAG, ID, NAME) VALUES (NO, 666, SSS)
when i go with this input file,
<root>
<StatementName1>
     <dbTableName action="INSERT">
         <table>EMPLOYEE</table>
          <access>
                                <flag>NO</flag>
                               <ID>777</ID>
                    <NAME>TTTT</NAME>
                    </access>
               </dbTableName>
</StatementName1>
</root>
Then i am facing this problem,
Message processing failed. Cause: com.sap.aii.af.ra.ms.api.RecoverableException: Error processing request in sax parser: Error when executing statement for table/stored proc. 'EMPLOYEE' (structure 'StatementName1'): java.sql.SQLException: FATAL ERROR: Column 'flag' does not exist in table 'EMPLOYEE'
Here I cant get any SQL statement as it is not successfull.
I have gone through your link but it also says to modify the column in the input file which is not possible for me. Can you please help me in this regard?
Thanks,
Soorya

Problem with Oracle 11g(32 bit) installation on windows 7 ultimate edition

Hello all,
I have a problem with Oracle 11g(32 bit) installation on windows 7 ultimate edition (32 bit).
I have successfully installed it immediately after OS installation. But today, i have decided to deinstall it and go for Oracle 10g version for 32 bit.
Everything went normal during installation, but i can see the services is not present in services.msc. Also its throwing some exception for dbca, netca
Now i tried to deinstall it and again go for 11g. But even the same story here..
Can anybody give me a solution for this..
-Regards
Rajesh Menon

Saqib Alam wrote:
i recently install Oracle 11g R1 on windows 7 ultimate, i installed it and working perfectly.
ur problem is that u install latest version and now u trying to installing old version.
now u need to uninstall 10g and delete oracle from services, if the probleme presist then u should
install fresh windows 7.
Regards
SaqibNo need to install a fresh OS. That's like tearing your house down just because you wired a lamp wrong and blew a circuit breaker.
There are MeaLink notes on how to eradicate an Oracle install from Windows, but it boils down to this:
Stop all Oracle services
In the registery:
- Delete all oracle services from the register (HKLM\SYSTEM\CurrentControlSet
- Delete the entire Oralce folder from HKLM\Software
reboot
Delete the ORACLE_HOME directory and any other Oracle related directories/files. Offhand, it seems like there is an Oracle directory under Program Files.
reboot

A lot of problems with Oracle BI SEE 11g

I have a lot of problems with Oracle BI SEE 11g
1. I upgraded my BI SEE 10 repository and can it openning in offline mode.
2. I can't deploy my upgraded repository in EM MW Control 11g - when i try to open Farm_bifoundation_domain->Business Intelligence->coreapplication, i get error "Stream closed
For more information, please see the server's error log for an entry beggining with: Server Exception during PPR, #41".
Opening Logs by EM control doesn't work too.
in file middleware\user_projects\domains\bifoundation_domain\servers\AdminServer\logs\AdminServer.log i see this event:
<Error> <HTTP> <oratest.itera.ru> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <b639ac3e56e9a463:bd6fa7f:12ac7271e09:-8000-00000000000009e8> <1283408423378> <BEA-101019> <[ServletContext@329875093[app:em module:/em path:/em spec-version:2.5]] Servlet failed with IOException
java.io.IOException: Stream closed
Have you any ideas?
3. Ok, i taking sample repository and adding a new datasource in it:
Database: Oracle 8i
Connection pool:
Call interface OCI 8i/9i
Data source name:
(DESCRIPTION = (ADDRESS_LIST = (ADDRESS = (PROTOCOL = TCP) (Host = oraapp) (Port = 1521) ) ) (CONNECT_DATA = (SID = MYSID) ) )
This settings are working fine in BI 10.
In BI 11g i get this funny error: "The connection has failed". I lost my time in attempts to connect to Oracle DB 8, but have not results. After that i hacked button "Query DBMS" at "Features" tab, pressed it and when get error "ORA-03134: Connections to this server version are no longer supported.".
Therefore Oracle 8 DB as datasource not supported. Am i right?
4. In sample repository i added oracle DB 10 as datasource, then added two dual tables and their connection to all layers.
Now i open BI Answers, and trying to create report with one dummy column, Now i have this error:
Error
View Display Error
Odbc driver returned an error (SQLExecDirectW).
Error Details
Error Codes: OPR4ONWY:U9IM8TAC:OI2DL65P
State: HY000. Code: 10058. [NQODBC] [SQL_STATE: HY000] [nQSError: 10058] A general error has occurred. [nQSError: 43113] Message returned from OBIS. [nQSError: 42016] Check database specific features table. Must be able to push at least a single table reference to a remote database (HY000)
SQL Issued: SELECT s_0, s_1 FROM ( SELECT 0 s_0, "ORA10G"."dual"."dummy" s_1 FROM "ORA10G" ) djm
Database features are defaults.
Does anyone solve this problem?

Turribeach, Thanks for you time.
1. It was not a question
3. Yes, i have read platforms, but not supported datasources. Now i see, that BI 11g support as datasource Oracle DB 9.2.0.7 or higher. I am sorry.
4. I'm using OCI connection type
Now i recreate Database in Physical schema and answers is showing report data for me! But only from one table, when i use columns from to tables from one datasource, i geting error:
Error View Display Error Odbc driver returned an error (SQLExecDirectW). Error Details Error Codes: OPR4ONWY:U9IM8TAC:OI2DL65P State: HY000. Code: 10058. [NQODBC] [SQL_STATE: HY000] [nQSError: 10058] A general error has occurred. [nQSError: 43113] Message returned from OBIS. [nQSError: 46008] Internal error: File server/Utility/Server/DataType/SUKeyCompare.cpp, line 875. (HY000) SQL Issued: SELECT s_0, s_1, s_2 FROM ( SELECT 0 s_0, "Ora10g"."hierarchy_obj_cust_v"."sort_order" s_1, "Ora10g"."NSI_SCHEMA"."SCHEMA_NAME" s_2 FROM "Ora10g" ) djm
Edited by: serzzzh on 03.09.2010 3:44

Client Having Problems With Acrobat 11.0.3 and files created in earlier versions

We are noticing problems with our PDF's depending on the version of Adobe they are viewed with.
If the PDF File was created pre 11.0.3 and you view it with 11.0.3 you only see squares in the narratives from SQL/Oracle Text Fields .
If the PDF File was created with 11.0.3 and you view it with 11.0.3, it is fine.
Update. As with most Software/Support services the correct information is not always received and must be forced out of the Customers.
The PDF files are drawing of Auto Accidents created in Adobe Acrobat and stored on a Microsoft Server Network. The files are then merged inside a Microsoft Visual FoxPro 9.0 SP2 Application with Data received from Microfoft SQL Server 2005 Database through a ODBC driver to a FoxPro Cursor and then created with a Visual FoxPro Report Form. The VFP Report form page that displaies/prints the PDF file is a OLE File Object and is created / Printed through Amyuni 4.5xx Converter to a PDF file and then viewed with Adobe Acrobat 11.0.3.

There are software packages that will do those checks. So in that sense there is a way to check. However, that would be a programming task and not necessarily simple. So I really can't help you on the programming aspect (I would refer you to something like the SDK forum for programming).
To check the file, you would normally open the document properties (ctrl-D). The general tab provides the version number and the fonts tab will tell you what fonts are used and embedded.

Problem with oracle.jbo.domain.Date

Hi there,
I've a problem with oracle.jbo.domain.Date,
I'm doing this code (this part of code is used in my Session Attribute Listener):
* This method is used to add the session id in the database, whenever user login
public void attributeAdded(HttpSessionBindingEvent hsbe){
if(!hsbe.getName().equals("user")){
return;
AmLogin am = (AmLogin)Configuration.createRootApplicationModule(
"com.ahm.pdt001.am.AmLogin",
"AmLoginLocal");
try{
hsbe.getSession().setAttribute("login", new Date(new Timestamp(
System.currentTimeMillis())));
am.createLogin(hsbe.getValue().toString(), hsbe.getSession().
getAttribute("login").toString());
} catch(Exception e){
e.printStackTrace();
System.out.println("Error insert data user: " + hsbe.getValue());
} finally{
Configuration.releaseRootApplicationModule(am, true);
Everything is running well in Jdev 10.1.3 (I'm using ADF Faces technology), and I'm trying to deploy it on OC4J 10.1.2 and it works. But it raised an error when this part of code is runned.
--------------caused and error------------------------
hsbe.getSession().setAttribute("login", new Date(new Timestamp(
System.currentTimeMillis())));
And this is an error:
javax.faces.FacesException: #{pdt001.loginAction}: javax.faces.el.EvaluationException: java.lang.NoSuchMethodError: oracle.jbo.domain.Date.<init>(Ljava/sql/Timestamp;)V at com.sun.faces.application.ActionListenerImpl.processAction(ActionListenerImpl.java:78) at oracle.adf.view.faces.component.UIXCommand.broadcast(UIXCommand.java:211) at javax.faces.component.UIViewRoot.broadcastEvents(UIViewRoot.java:267) at javax.faces.component.UIViewRoot.processApplication(UIViewRoot.java:381) at com.sun.faces.lifecycle.InvokeApplicationPhase.execute(InvokeApplicationPhase.java:75) at com.sun.faces.lifecycle.LifecycleImpl.phase(LifecycleImpl.java:200) at com.sun.faces.lifecycle.LifecycleImpl.execute(LifecycleImpl.java:90) at javax.faces.webapp.FacesServlet.service(FacesServlet.java:197) at com.evermind[Oracle Application Server Containers for J2EE 10g (10.1.2.0.0)].server.http.ResourceFilterChain.doFilter(ResourceFilterChain.java:65) at oracle.adf.model.servlet.ADFBindingFilter.doFilter(ADFBindingFilter.java:332) at com.evermind[Oracle Application Server Containers for J2EE 10g (10.1.2.0.0)].server.http.EvermindFilterChain.doFilter(EvermindFilterChain.java:16) at oracle.adfinternal.view.faces.webapp.AdfFacesFilterImpl._invokeDoFilter(AdfFacesFilterImpl.java:367) at oracle.adfinternal.view.faces.webapp.AdfFacesFilterImpl._doFilterImpl(AdfFacesFilterImpl.java:336) at oracle.adfinternal.view.faces.webapp.AdfFacesFilterImpl.doFilter(AdfFacesFilterImpl.java:196) at oracle.adf.view.faces.webapp.AdfFacesFilter.doFilter(AdfFacesFilter.java:87) at com.evermind[Oracle Application Server Containers for J2EE 10g (10.1.2.0.0)].server.http.EvermindFilterChain.doFilter(EvermindFilterChain.java:20) at com.ahm.filter.AhmFilterSession.doFilter(AhmFilterSession.java:45) at com.evermind[Oracle Application Server Containers for J2EE 10g (10.1.2.0.0)].server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:645) at com.evermind[Oracle Application Server Containers for J2EE 10g (10.1.2.0.0)].server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:322) at com.evermind[Oracle Application Server Containers for J2EE 10g (10.1.2.0.0)].server.http.HttpRequestHandler.processRequest(HttpRequestHandler.java:790) at com.evermind[Oracle Application Server Containers for J2EE 10g (10.1.2.0.0)].server.http.HttpRequestHandler.run(HttpRequestHandler.java:270) at com.evermind[Oracle Application Server Containers for J2EE 10g (10.1.2.0.0)].server.http.HttpRequestHandler.run(HttpRequestHandler.java:112) at com.evermind[Oracle Application Server Containers for J2EE 10g (10.1.2.0.0)].util.ReleasableResourcePooledExecutor$MyWorker.run(ReleasableResourcePooledExecutor.java:186) at java.lang.Thread.run(Thread.java:534)Caused by: javax.faces.el.EvaluationException: java.lang.NoSuchMethodError: oracle.jbo.domain.Date.<init>(Ljava/sql/Timestamp;)V at com.sun.faces.el.MethodBindingImpl.invoke(MethodBindingImpl.java:130) at com.sun.faces.application.ActionListenerImpl.processAction(ActionListenerImpl.java:72) ... 23 moreCaused by: java.lang.NoSuchMethodError: oracle.jbo.domain.Date.<init>(Ljava/sql/Timestamp;)V at com.ahm.pdt001.listener.Pdt001AttributeSessionListener.attributeAdded(Pdt001AttributeSessionListener.java:27) at com.evermind[Oracle Application Server Containers for J2EE 10g (10.1.2.0.0)].server.http.EvermindHttpSession.setAttribute(EvermindHttpSession.java:128) at com.ahm.pdt001.bean.Pdt001Bean.loginAction(Pdt001Bean.java:61) at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method) at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39) at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25) at java.lang.reflect.Method.invoke(Method.java:324) at com.sun.faces.el.MethodBindingImpl.invoke(MethodBindingImpl.java:126)
Does anybody have the same problem like this? I've used the same method in my previous project to create oracle.jbo.domain.Date with current time using java.sql.Timestamp, but I don't know why this error happened.
Thx,
Andre

Re: oracle jbo.domain.Date issues in 10.1.3
Sascha

Please Help: A Problem With Oracle-Provided 'Working' Example

A Problem With Oracle-Provided 'Working' Example Using htp.formcheckbox
I followed the simple steps in the Oracle-provided example:
Doc ID: Note:116534.1
Subject: How to use checkbox in webdb for bulk update using webdb report
However, when I select a checkbox and click on the Update button, I get a "ORA-01036: illegal variable name/number" error. Please advise. This was a very promising feature.
Fred
Below are step-by-step instructions provided by Oracle to create this "working" example:
How to use a checkbox in WEBDB 2.2 report for bulk update.
PURPOSE
This article shows how checkbox can used placed on WEBDB report
and how to use it.
SCOPE & APPLICATION
The following example to guide through the steps to create a working
example of this.
In this example, the checkbox is used to select the records. On clicking
the update button, the pl/sql procedure is called which will update col1 to
the string 'OK'.
After the update is done, the PL/SQL procedure calls the report again.
Since the report only select records where col1 is null, the updated
records will not be displayed when the report is called again.
Step 1 - Create Table
From Sqlplus, log in as scott/tiger and execute the following:
drop table chkbox_example;
create table chkbox_example
(id varchar2(10) not null,
comments varchar2(20),
col1 varchar2(10));
Step 2 - Insert Test Data
From Sqlplus, still logged in as scott/tiger , execute the following:
declare
l_i number;
begin
for l_i in 1..50 loop
insert into chkbox_example values (l_i, 'Comments ' || l_i , NULL);
end loop;
commit;
end;
Step 3 -Create SQL Query based WEBDB report
Logon to a WEBDB site which has access to the database the above tables are created.
Create a SQL based Report.
Name the report :RPT_CHKBOX
The select statement for the report is :
select c.id, c.comments, c.col1,
htf.formcheckbox('p_qty',c.id) Tick
from SCOTT.chkbox_example c
where c.col1 is null
In Advanced PL/SQL, (REPORT, Before displaying the form), put the following code
htp.formOpen('scott.chkbox_process');
htp.formsubmit('p_request','Update');
htp.br;
htp.br;
Step 4 - Create a stored procedure in the database
Log on to the database as scott/tiger and execute the following to create the
procedure.
Note: Replace WEBDB to the appropriate webdb user for your installation.
In my database, I had installed webdb using WEBDB username, hence user webdb owns
the packages.
create or replace procedure chkbox_process
( p_request in varchar2 default null,
p_qty in wwv_utl_api_types.vc_arr ,
p_arg_names in wwv_utl_api_types.vc_arr ,
p_arg_values in wwv_utl_api_types.vc_arr
is
i number;
begin
for i in 1..p_qty.count loop
if p_qty(i) is not null then
begin
update chkbox_example
set col1 = 'OK'
where chkbox_example.id = p_qty(i);
end;
end if;
end loop;
commit;
/* To Call Report again after updating */
SCOTT.RPT_CHKBOX.show
(p_request=>'Run Report',
p_arg_names=>webdb.wwv_standard_util.string_to_table2(' '),
p_arg_values=>webdb.wwv_standard_util.string_to_table2(' '));
end;
Summary
There are essentially 2 main modules, The WEBDB report and the pl/sql procedure (chkbox_process)
A button is created via the advanced pl/sql coding which shows on top of the report. (The
button cannot be placed at the bottom of the report due to the way WEBDB creates the procedure
internally)
When any button is clicked on the report, it calls the pl/sql procedure chkbox_process.
The procedure is called , WEBDB always passes the parameters p_request,p_arg_names and o_arg_values.
p_qty is another parameter that we are passing additionally, This comes from the checkbox created
using the htf.formcheckbox in the report select statement.
The pl/sql procedure calls the report again after processing. This is done to
show how to call the report.
Restrictions:
-The Next and Prev buttons on the report will not work.
So it is important that the report can fit in 1 page only.
(This may mean that you will not select(not ticked) 'Paginate' under
'Display Option' in the WEBDB report. If you do this,
then in Step 4, remove p_arg_names and p_arg_values as input parameters
to the chkbox_process)

If your not so sure you can use the instanceof
insurance,
Object o = evt.getSource();
if (o instanceof Button) {
Button source = (Button) o;
I haven't thoroughly read the thread, but I use something like this:if (evt.getSource() == someObjRef) {
// do that voodoo
]I haven't looked into why you'd be creating a new reference...

Help me please : Serious problems with collection-mapping, list-mapping and map-mappi

Hi everybody;
I have serious problems with list-mapping, collection-mapping and map-mapping.
Acording to specifications and requirements in a system I am working on it is needed to
get a "list" of values or an indivudual value.I am working with ORACLE 9i Database,
ORACLE 9i AS and ORACLE 9i JDEVELOPER.
I tried to map a master-detail relationship in an entity-bean, using list-mapping.
And this was very useful in order to get a "list" of details, ...but, when I wanted
to get a single value I have some problems with persistence, something about "saving a state"
despite I just want to get the value of a single detail.
I decided to change it to map-mapping and the problem related with a single detail
worked successfully, but I can get access to the whole bunch of details.
May anyone of you help me with that?
I am very confused I do not know what to do.
Have any of you a solution for that problem?
Thank you very much.

Have you tried a restore in iTunes?

JDBC Problem with Oracle 8.1.7. and OC4J Version 2

Similar Messages

Maybe you are looking for