Load Testing - MDBs
I hvae 30 instances of my MDB Listening on a queue.. All works fine for small load
of messages to the queue. But when i start feeding about 200 messages at the same
time, there are some messages that stay up at the queue and wont get processed
until the TX times out. At this point, these messages are picked up again and
get processed. These messages are not going into the JMSRedelievered section of
the code which is true.. But im wondering why it wont get processed when there
were some free threads. At peak loads, there are 30 messages and i can imagine
the other messages waiting in teh queue for some MDBs to be freed. But even after
they are all done, they sit in the queue waiting for a timeout..
Any ideas what may be wrong?
Please let me know if i havent posted enough info
Hi
Thanks for the info.
However the I think I've localised the problem (not the solution)
If I understand correctly solveXPath is looking for .//FORM[@name='f1']/@action and will put the value of the action attribute into the variable web.formaction.f1
The line with _adf.ctrl-state is the last value and is not actually needed or used in this case.
For some reason .//FORM[@name='f1']/@action can't be found.
I've tried various variants (without the point, using @id instead of name) but no luck yet.
Any ideas ?
Regards
Paul
Similar Messages
-
Unable to capture the D4OSESSION during LOAD testing??
Hi,
Summary:
---------- I am doing the performance testing of the 50 concurrent users using one of the third party load test tool.But that tool is not able to capture the opening workbook sessions.
Detail
----------- Normally when I open a D4O session in the URL from the client machine in the database I saw the 3 sessions in v$session table.
2 sessions from Application Server.
1 Session from client machine.
the protocol that I used to open the D4OSession is HTTP
When I Choose any workbook from the opened d4osession in the V$session table the session from the client machine status becomes active.
so for the single d4o session oracle opening 3 session in the database.
Under this calculation I try to record the session for the performance testing using one of the third party tool called QA LOAD. I am unable to record all the 3 session,
I am able to record the application server sessions only ie.2 session ,but I am unable to record the session from Client machine.(User session is coming only when I opens the workbook)
I am not able to understand why the tool is not able understand d4osession protocol??
What could be the problem. Why I am not able to capture the d4osession when I opens the workbook.???? . Without using the tool I can able to see the all 3 sessions.
Actually the goal is to do a performance testing for 50 concurrent users.Its very difficult to do performance testing without a performance test tool...
Normally this tool can understand all kind of javabased application,Microsoft applications but I am not sure why it won't understand part of the d4osessions???
Even when I ry to capture this opening workbook session using winsock protocol also...but no luck!!!!.
Any advice/ Idea....Please post it !!!!
Eg: ---------------
Details of the d4o session
---------------------------- d4osession user : user1
Workbook name : workbook1
URL : http://applicationserver:7778/discoverer/plus?us=user1&lm=olap......
Browser : Internet Explorer 6.0
Database : Oracle 10G
Discoverer plus for olap : 10.1.2.48
Load Test tool : QA LOAD
Database OS : Linux
Application Server OS : Windows.
Thanks,
NatsHi keerthi,
1. I have pasted the code for the first issue
web
.button(
122,
"/web:window[@index='0' or @title='Manage Network Targets - Oracle Communications Order and Service Management - Order and Service Management']/web:document[@index='0' or @name='1824fhkchs_6']/web:form[@id='pt1:_UISform1' or @name='pt1:_UISform1' or @index='0']/web:button[@id='pt1:MA:0:n1:1:pt1:qryId1::search' or @value='Search' or @index='3']")
.click();
adf
.table(
"/web:window[@index='0' or @title='Manage Network Targets - Oracle Communications Order and Service Management - Order and Service Management']/web:document[@index='0' or @name='1c9nk1ryzv_6']/web:ADFTable[@absoluteLocator='pt1:MA:n1:pt1:pnlcltn:resId1']")
.columnSort("Ascending", "Name" );
} -
Unable to capture the Citrix network response time using OATS Load testing.
Unable to capture the Citrix network response time using OATS Load testing. Here is the scenario " in our project users logs into Citrix network and select the Hyperion application and does the Transaction and the Clients wants us to simulate the same scenario for load testing. We have scripted starting from Citrix Login and then launching Hyperion application. But the time taken to launch the Hyperion Application from Citrix network has not been captured whereas Hyperion Transaction time have been recorded. Can any help to resolve this issue ASAP?
Hi keerthi,
1. I have pasted the code for the first issue
web
.button(
122,
"/web:window[@index='0' or @title='Manage Network Targets - Oracle Communications Order and Service Management - Order and Service Management']/web:document[@index='0' or @name='1824fhkchs_6']/web:form[@id='pt1:_UISform1' or @name='pt1:_UISform1' or @index='0']/web:button[@id='pt1:MA:0:n1:1:pt1:qryId1::search' or @value='Search' or @index='3']")
.click();
adf
.table(
"/web:window[@index='0' or @title='Manage Network Targets - Oracle Communications Order and Service Management - Order and Service Management']/web:document[@index='0' or @name='1c9nk1ryzv_6']/web:ADFTable[@absoluteLocator='pt1:MA:n1:pt1:pnlcltn:resId1']")
.columnSort("Ascending", "Name" );
} -
Load Test Results - time series request data for by URL in VS2013
I am trying to figure out how to export and then analyze the results of a load test, but after the test is over it seems I cannot find the data for each individual request by url. This data shows during the load test itself, but after it is over it seems
as if that data is no longer accessible and all I can find are totals. The data that I want is under the "Page response time" graph on the graphs window during the test. I know this is not the response time for every single request and is probably
averaged, but that would suffice for the calculations I want to make.
I have looked in the database on my local machine (LoadTest2010, where all of the summary data is stored) and I cannot find the data I'm looking for.
My goal is to plot (probably in excel) each request url against the user load and analyze the slope of the response time averages to determine which requests scale the worst (and best). During the load test I can see this data and get a visual idea but when
it ends I cannot seem to find it to export.
A) Can this data be exported from within visual studio? Is there a setting required to make VS persist this data to the database? I have, from under Run Settings, the "Results" section "Timing Details Storage" set to "All individual
details" and the Storage Type set to "Database".
B) If this data isn't available from within VS, is it in any of the tables in the LoadTest2010 database where all of the summary data is stored?
Thanks
LukeHi Luke,
Since the load test is used to
simulate many users accessing a server at the same time, it is mainly verify a wev server load stress.
As you said that you want to find the data
for each individual request by url, I know that generally we can analyze the url request from the Summary like the following screen shot.
>>I
have looked in the database on my local machine (LoadTest2010, where all of the summary data is stored) and I cannot find the data I'm looking for.
I suggest you can try to add the
SQL Tracing Connect String in the Run Setting properties to trace the data.
Reference:
https://social.msdn.microsoft.com/Forums/en-US/74ff1c3e-cdc5-403a-b82f-66fbd36b1cc2/sql-server-tracing-in-visual-studio-load-test?forum=vstest
In addition, you can try to create an excel to analyze the load test result, for more information:
http://msdn.microsoft.com/en-us/library/dd997707.aspx
Hope it help you!
Best Regards,
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey. -
How to set Proxy for IE 8.0 on doing Load Testing with OATS 12.1.0.2
I have tried adding proxy server by adding the address to "Localhost" and Port as 8080.
but nothing is working out, for recording an EBS instance its working fine ,no need to setup anything in the OATS tool, eg, Proxy settings.
But when it comes to BPM with ADF technology , the recorder is not starting the Recording even the pointer navigation also not wokring.
So, is there way to record the ADF applications in BPM ?
Thanks in advance.Hi Wayne,
Thing is do we need to add the proxy server here?, as for doing Load testing on EBS application,there is no need of adding a proxy server,
So the same way it should work with the ADF application too, but its not showing any mouse pointer in the Browser tool bar or recording
the navigation.
Point to be noted is, we need to connect to VPN in order to access the Application.
is it because of VPN connection that its not recording?
But while doing the functional testing I didn't face anyproblem though as its recording everything even if we are connected to VPN.
In Functional testing also i found ,all the input fields where we add the "username" or any input data via a "text box" the tool is not able to
record the field information along with the input we enter.
If you could let me know ,how to do a Load testing for ADF application using BPM , it would be helpful
Thanks
Atish -
Load testing of Web ADI in EBS R12
Hi,
I am currently testing Oracle E-Business Suite R12. Has anyone load tested the Web ADI integrator for Oracle EBS R12? What tool did you use?
Did you use QTP or Oracle ATS functional testing? I was not able to do a POC using LoadRunner or OATS load test tool.
Basically Web ADI is an integration that allows data to be uploaded/downloaded between Oracle EBS R12 and local excel.
Any help is appreciated.
Regards
CP
Edited by: oracletest on 14-May-2012 07:17Hi,
I have found that OATS does not work easily with Web ADI in my case.
Regards
CP -
Load testing with concurrent users on HTTP Web
Hello,
I am trying to do load testing my PHP Web Application.
I record (with Firefox) and developed the testing script with OpenScript,
but I found that I could only test with "Iteration" feature.
Is there any way to do load testing with concurrent users ( multi users login at the same time ) which defined in databank?
Thanks for help.Hi
You need to load the script into OLT (Oracle Load Testing) you can download it from here you need the first link Oracle Application Testing Suite and run the OATSxxx.exe to install OLT.
Regards
Alex -
Basic Authentication for load testing WSDL Web Service
I'm trying to load test a web service; the WSDL URL is behind a username and password, using the basic http authentication. I can add the WSDL URL without issue with the username and password, but when I playback the script, I get "401 Unauthorized" errors
I looked at Preferences > Record > Web Services > Proxy Configuration, which then refers you to Preferences > Record > HTTP > Proxy Settings. I also looked at similar settings under Preferences > Playback.
I am running OpenScript (9.1), how do I configure this ... ?
Many thanks!
KM
Edited by: KM on Sep 14, 2011 12:12 PMHello
You can right click on the initialize section of your script then:
Add -> Other -> HTTP -> Authentication.
You need 3 parameters:
A url - http://someurl - that will authenticate any url that contains the http://someurl string e.g http://someurl.com/index.html
A password
A user
The following code should be added in your script:
http.addAuthentication("http://someurl", "username",
deobfuscate("5blNah5kX/XuZnepYwInFw=="));Hope this helps
Alex -
Proxy issue in OpenScript Load Testing Protocol(Web/HTTP) during PlayBack
Hi All,
I am new to OATS and I recorded a sample script on OATS for Load Testing protocol(Web/HTTP) in OpenScript but when I Playback it then it is giving the following as the result:
"*Invalid response received from proxy server: HTTP/1.1 502 Proxy Error ( The ISA Server denied the specified Uniform Resource Locator (URL). ).*
*Comparable WinInet error code: Error 12033: ERROR_INTERNET_INVALID_PROXY_REQUEST.*"
In ErrorLog following errors are mentioned:
"*eclipse.buildId=unknown*
*java.version=1.6.0_07*
*java.vendor=Sun Microsystems Inc.*
*BootLoader constants: OS=win32, ARCH=x86, WS=win32, NL=en_IN*
*Command-line arguments: -os win32 -ws win32 -arch x86*
*Error*
*Thu Apr 25 12:00:17 IST 2013*
*fireActiveProjectChanged*
*java.lang.IllegalStateException: Error getting Parent Element Id for element-id: 9*
* at oracle.oats.scripting.models.store.util.db.ModelDBPersistence.getElementParentId(ModelDBPersistence.java:283)*
* at oracle.oats.scripting.models.stores.database.DatabaseStore.getParentId(DatabaseStore.java:287)*
* at oracle.oats.scripting.models.stores.database.ResultOverviewStore.getParentId(ResultOverviewStore.java:550)*
* at oracle.oats.scripting.models.ModelElement.getParentId(ModelElement.java:275)*
* at oracle.oats.scripting.models.ModelAccessor.findParent(ModelAccessor.java:146)*
* at oracle.oats.scripting.models.ModelElement.findParent(ModelElement.java:289)*
* at oracle.oats.scripting.ui.views.results.ResultsContentProvider.getParent(ResultsContentProvider.java:49)*
* at org.eclipse.jface.viewers.AbstractTreeViewer.getParentElement(AbstractTreeViewer.java:1646)*
* at org.eclipse.jface.viewers.TreeViewer.getParentElement(TreeViewer.java:601)*
* at org.eclipse.jface.viewers.AbstractTreeViewer.internalExpand(AbstractTreeViewer.java:1573)*
* at org.eclipse.jface.viewers.AbstractTreeViewer.setSelectionToWidget(AbstractTreeViewer.java:2456)*
* at org.eclipse.jface.viewers.StructuredViewer.setSelectionToWidget(StructuredViewer.java:1680)*
* at org.eclipse.jface.viewers.AbstractTreeViewer.setSelectionToWidget(AbstractTreeViewer.java:2864)*
* at org.eclipse.jface.viewers.StructuredViewer.setSelection(StructuredViewer.java:1636)*
* at org.eclipse.jface.viewers.TreeViewer.setSelection(TreeViewer.java:1104)*
* at oracle.oats.scripting.ui.views.results.ResultsDisplayView.setSelection(ResultsDisplayView.java:584)*
* at oracle.oats.scripting.ui.views.results.ResultsDisplayView.onActiveScriptingProjectChanged(ResultsDisplayView.java:266)*
* at oracle.oats.scripting.ui.internal.editors.openScript.OpenScriptEditorRegistry.fireActiveProjectChanged(OpenScriptEditorRegistry.java:377)*
* at oracle.oats.scripting.ui.internal.editors.openScript.OpenScriptEditorRegistry.access$8(OpenScriptEditorRegistry.java:371)*
* at oracle.oats.scripting.ui.internal.editors.openScript.OpenScriptEditorRegistry$EditorListener.partActivated(OpenScriptEditorRegistry.java:121)*
* at org.eclipse.ui.internal.PartListenerList2$1.run(PartListenerList2.java:68)*
* at org.eclipse.core.runtime.SafeRunner.run(SafeRunner.java:37)*
* at org.eclipse.core.runtime.Platform.run(Platform.java:880)*
* at org.eclipse.ui.internal.PartListenerList2.fireEvent(PartListenerList2.java:53)*
* at org.eclipse.ui.internal.PartListenerList2.firePartActivated(PartListenerList2.java:66)*
* at oracle.oats.scripting.ui.internal.TailoredPartService.firePartActivated(TailoredPartService.java:310)*
* at oracle.oats.scripting.ui.internal.TailoredPartService.setActivePart(TailoredPartService.java:344)*
* at org.eclipse.ui.internal.WWinPartService.updateActivePart(WWinPartService.java:124)*
* at org.eclipse.ui.internal.WWinPartService.access$0(WWinPartService.java:115)*
* at org.eclipse.ui.internal.WWinPartService$1.partDeactivated(WWinPartService.java:48)*
* at org.eclipse.ui.internal.PartListenerList2$4.run(PartListenerList2.java:113)*
* at org.eclipse.core.runtime.SafeRunner.run(SafeRunner.java:37)*
* at org.eclipse.core.runtime.Platform.run(Platform.java:880)*
* at org.eclipse.ui.internal.PartListenerList2.fireEvent(PartListenerList2.java:53)*
* at org.eclipse.ui.internal.PartListenerList2.firePartDeactivated(PartListenerList2.java:111)*
* at oracle.oats.scripting.ui.internal.TailoredPartService.firePartDeactivated(TailoredPartService.java:323)*
* at oracle.oats.scripting.ui.internal.TailoredPartService.setActivePart(TailoredPartService.java:338)*
* at org.eclipse.ui.internal.WorkbenchPagePartList.fireActivePartChanged(WorkbenchPagePartList.java:56)*
* at org.eclipse.ui.internal.PartList.setActivePart(PartList.java:126)*
* at org.eclipse.ui.internal.WorkbenchPage.setActivePart(WorkbenchPage.java:3491)*
* at org.eclipse.ui.internal.WorkbenchPage.requestActivation(WorkbenchPage.java:3034)*
* at org.eclipse.ui.part.MultiEditor.activateEditor(MultiEditor.java:178)*
* at oracle.oats.scripting.ui.internal.editors.openScript.OpenScriptEditor.activateEditor(OpenScriptEditor.java:1247)*
* at org.eclipse.ui.part.MultiEditor$1.handleEvent(MultiEditor.java:81)*
* at org.eclipse.swt.widgets.EventTable.sendEvent(EventTable.java:84)*
* at org.eclipse.swt.widgets.Widget.sendEvent(Widget.java:1003)*
* at org.eclipse.swt.widgets.Widget.sendEvent(Widget.java:1027)*
* at org.eclipse.swt.widgets.Widget.sendEvent(Widget.java:1008)*
* at org.eclipse.swt.widgets.Shell.setActiveControl(Shell.java:1353)*
* at org.eclipse.swt.widgets.Control.sendFocusEvent(Control.java:2443)*
* at org.eclipse.swt.widgets.Widget.wmSetFocus(Widget.java:2266)*
* at org.eclipse.swt.widgets.Control.WM_SETFOCUS(Control.java:4414)*
* at org.eclipse.swt.widgets.Tree.WM_SETFOCUS(Tree.java:6846)*
* at org.eclipse.swt.widgets.Control.windowProc(Control.java:3855)*
* at org.eclipse.swt.widgets.Tree.windowProc(Tree.java:5791)*
* at org.eclipse.swt.widgets.Display.windowProc(Display.java:4528)*
* at org.eclipse.swt.internal.win32.OS.SetFocus(Native Method)*
* at org.eclipse.swt.widgets.Control.forceFocus(Control.java:974)*
* at org.eclipse.swt.widgets.Control.setFocus(Control.java:2811)*
* at org.eclipse.swt.widgets.Composite.setFocus(Composite.java:927)*
* at oracle.oats.scripting.ui.editors.tree.TreeEditor.setFocus(TreeEditor.java:230)*
* at org.eclipse.ui.part.MultiEditor.setFocus(MultiEditor.java:139)*
* at org.eclipse.ui.internal.PartPane.setFocus(PartPane.java:325)*
* at org.eclipse.ui.internal.EditorPane.setFocus(EditorPane.java:127)*
* at org.eclipse.ui.internal.PartStack.presentationSelectionChanged(PartStack.java:846)*
* at org.eclipse.ui.internal.PartStack.access$1(PartStack.java:829)*
* at org.eclipse.ui.internal.PartStack$1.selectPart(PartStack.java:139)*
* at org.eclipse.ui.internal.presentations.util.TabbedStackPresentation$1.handleEvent(TabbedStackPresentation.java:133)*
* at org.eclipse.ui.internal.presentations.util.AbstractTabFolder.fireEvent(AbstractTabFolder.java:267)*
* at org.eclipse.ui.internal.presentations.util.AbstractTabFolder.fireEvent(AbstractTabFolder.java:276)*
* at org.eclipse.ui.internal.presentations.defaultpresentation.DefaultTabFolder.access$1(DefaultTabFolder.java:1)*
* at org.eclipse.ui.internal.presentations.defaultpresentation.DefaultTabFolder$2.handleEvent(DefaultTabFolder.java:87)*
* at org.eclipse.swt.widgets.EventTable.sendEvent(EventTable.java:84)*
* at org.eclipse.swt.widgets.Widget.sendEvent(Widget.java:1003)*
* at org.eclipse.swt.widgets.Widget.sendEvent(Widget.java:1027)*
* at org.eclipse.swt.widgets.Widget.sendEvent(Widget.java:1012)*
* at org.eclipse.swt.widgets.Widget.notifyListeners(Widget.java:770)*
* at org.eclipse.swt.custom.CTabFolder.setSelection(CTabFolder.java:3242)*
* at org.eclipse.swt.custom.CTabFolder.onMouse(CTabFolder.java:2017)*
* at org.eclipse.swt.custom.CTabFolder$1.handleEvent(CTabFolder.java:320)*
* at org.eclipse.swt.widgets.EventTable.sendEvent(EventTable.java:84)*
* at org.eclipse.swt.widgets.Widget.sendEvent(Widget.java:1003)*
* at org.eclipse.swt.widgets.Display.runDeferredEvents(Display.java:3823)*
* at org.eclipse.swt.widgets.Display.readAndDispatch(Display.java:3422)*
* at org.eclipse.ui.internal.Workbench.runEventLoop(Workbench.java:2382)*
* at org.eclipse.ui.internal.Workbench.runUI(Workbench.java:2346)*
* at org.eclipse.ui.internal.Workbench.access$4(Workbench.java:2198)*
* at org.eclipse.ui.internal.Workbench$5.run(Workbench.java:493)*
* at org.eclipse.core.databinding.observable.Realm.runWithDefault(Realm.java:288)*
* at org.eclipse.ui.internal.Workbench.createAndRunWorkbench(Workbench.java:488)*
* at org.eclipse.ui.PlatformUI.createAndRunWorkbench(PlatformUI.java:149)*
* at org.eclipse.ui.internal.ide.application.IDEApplication.start(IDEApplication.java:113)*
* at org.eclipse.equinox.internal.app.EclipseAppHandle.run(EclipseAppHandle.java:193)*
* at org.eclipse.core.runtime.internal.adaptor.EclipseAppLauncher.runApplication(EclipseAppLauncher.java:110)*
* at org.eclipse.core.runtime.internal.adaptor.EclipseAppLauncher.start(EclipseAppLauncher.java:79)*
* at org.eclipse.core.runtime.adaptor.EclipseStarter.run(EclipseStarter.java:386)*
* at org.eclipse.core.runtime.adaptor.EclipseStarter.run(EclipseStarter.java:179)*
* at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)*
* at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)*
* at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)*
* at java.lang.reflect.Method.invoke(Method.java:597)*
* at org.eclipse.equinox.launcher.Main.invokeFramework(Main.java:549)*
* at org.eclipse.equinox.launcher.Main.basicRun(Main.java:504)*
* at org.eclipse.equinox.launcher.Main.run(Main.java:1236)*
* at org.eclipse.equinox.launcher.Main.main(Main.java:1212)*
*Caused by: oracle.oats.utilities.db.exceptions.DisconnectDbException: Verify if database connection exists for C:\OracleATS\OFT\iTube3\results\Session3\data*
* at oracle.oats.utilities.db.JavaDbSystem.executeQuery(JavaDbSystem.java:335)*
* at oracle.oats.utilities.db.core.ElementDao.selectParentId(ElementDao.java:215)*
* at oracle.oats.utilities.db.DatabasePersister.getParentIdFor(DatabasePersister.java:89)*
* at oracle.oats.scripting.models.store.util.db.ModelDBPersistence.getElementParentId(ModelDBPersistence.java:278)*
* ... 104 more*
*Caused by: java.sql.SQLNonTransientConnectionException: No current connection.*
* at org.apache.derby.impl.jdbc.SQLExceptionFactory40.getSQLException(Unknown Source)*
* at org.apache.derby.impl.jdbc.Util.newEmbedSQLException(Unknown Source)*
* at org.apache.derby.impl.jdbc.Util.newEmbedSQLException(Unknown Source)*
* at org.apache.derby.impl.jdbc.Util.noCurrentConnection(Unknown Source)*
* at org.apache.derby.impl.jdbc.EmbedConnection.checkIfClosed(Unknown Source)*
* at org.apache.derby.impl.jdbc.EmbedConnection.setupContextStack(Unknown Source)*
* at org.apache.derby.impl.jdbc.EmbedConnection.prepareStatement(Unknown Source)*
* at org.apache.derby.impl.jdbc.EmbedConnection.prepareStatement(Unknown Source)*
* at oracle.oats.utilities.db.util.SQLUtils.prepare(SQLUtils.java:307)*
* at oracle.oats.utilities.db.StatementFactory.makeStatement(StatementFactory.java:20)*
* at oracle.oats.utilities.db.PreparedStatementCache.addStatement(PreparedStatementCache.java:38)*
* at oracle.oats.utilities.db.JavaDbSystem.executeQuery(JavaDbSystem.java:316)*
* ... 107 more*
*Caused by: java.sql.SQLException: No current connection.*
* at org.apache.derby.impl.jdbc.SQLExceptionFactory.getSQLException(Unknown Source)*
* at org.apache.derby.impl.jdbc.SQLExceptionFactory40.wrapArgsForTransportAcrossDRDA(Unknown Source)*
* ... 119 more*
And in Debug tag I am getting the following errors:
*"<disconnected>org.eclipse.equinox.launcher.Main at localhost:59115"*
I am working with OATS on company network and also I am using the correct proxy setting(confirmed). When i tried recording a company internal web application(No Proxy Required) its still giving same proxy errors.
Error results are always changeing when I change my Port No. for proxy setting (Default Port No for my network is 8080).
For port No 8080 following error is displayed result tab:
*"Failed HTTP response code: 407 Proxy Authentication Required ( Access is denied. ) "*
For port no 7777 & 443 following error is displayed in the result tab: (Have changed the proxy server address to "xyz"):
*Failed The attempt to connect to the server xyzproxy.xyz.com on port 7777 failed.*
*Comparable WinInet error code: Error 12029: ERROR_INTERNET_CANNOT_CONNECT. Caused by: java.net.ConnectException occurred. Error Message:Connection timed out: connect*
I have just disabled the cookies from my script, no other changes have been made(no parametrization and no correlation as of now).
I have tried everything with port numbers and also with Playback settings in openscript preference for proxy, tried to playback the script with proxy, without proxy for both the type of applications, company internal and external but still the same errors.
Anyone please suggest me a solution to this problem.
Thanks,
Abhi.
Edited by: 1002084 on Apr 25, 2013 12:12 AMHi,
I think your password is encrypted. Try replace password "a99fad1866af01d9375627d5d08d7f1c11ed4d3f6d5d2372d40908884a15b8e6" with your password.
Or Get output of obfuscate("your password") and replace "a99fad1866af01d9375627d5d08d7f1c11ed4d3f6d5d2372d40908884a15b8e6" with {{@deobfuscate( output of obfuscate("your password") )}}
Regards,
Deepu M -
How to do a load testing in Sharepoint 2010 site
Hi,
I have never done a performance or load testing on SharePoint 2010 site.
I have a site which has only one custom code written for consolidating documents. I want to check the performance of the site.
How do I go about this ? I want to know how many users can login at a time and view the site without any delay and
check how many people can consolidate documents at a time .
Thanks in Advance.
PallaviThere's several ways to do it, the most common is to use the SharePoint load testing kit detailed in the second link below. For a more general guide try the first:
http://technet.microsoft.com/en-us/library/ff758659.aspx#createtests
http://technet.microsoft.com/en-us/library/ff823736(v=office.14).aspx -
Hi,
I am using visual studio 2013. After running a load test on my application, I need to view the "90% Page Time", "95% Page Time" and "99% Page Time" percentile data in tabular results view. But since I have started
using visual studio 2013, these columns appear blank after load test execution is completed. Is there a specific configuration change is required to view data from these columns ?
Please refer attached screen shot -
Help much appreciated.
Thanks,
Rahul S.Hi Rahul S,
To collect the data, in the Load Test Editor, under the Run Settings node, select the run setting node to change. In the
Properties window, for the Timing Details Storage property, select
All Individual Details.
Best Regards,
Jack
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey. -
Error While trying to Run load test on OATS using Command prompt
Getting the below error message while trying to execute command line to start OATS load test.
log4j:WARN No appenders could be found for logger (oracle.oats.server.jndi.JndiL
ookup).
log4j:WARN Please initialize the log4j system properly.
log4j:WARN See http://logging.apache.org/log4j/1.2/faq.html#noconfig for more in
fo.
Error initializing controller connection to t3://rws21410019.us.oracle.com:8088/
weblogic\n\n(message id=ctl.initError)
oracle.oats.client.controller.ControllerException: Error initializing controller
connection to t3://rws21410019.us.oracle.com:8088/weblogic\n\n(message id=ctl.i
nitError)
at oracle.oats.app.controller.client.ControllerClient.initController(Con
trollerClient.java:268)
at oracle.oats.app.controller.client.ControllerSyncedClient.<init>(Contr
ollerSyncedClient.java:137)
at oracle.oats.app.controller.client.OltCommandLine.<init>(OltCommandLin
e.java:43)
at oracle.oats.client.CommandLine.initController(CommandLine.java:748)
at oracle.oats.client.CommandLine.run(CommandLine.java:179)
at oracle.oats.client.CommandLine.main(CommandLine.java:61)
Caused by: javax.naming.AuthenticationException [Root exception is java.lang.Sec
urityException: User: weblogic, failed to be authenticated.]
at weblogic.jndi.internal.ExceptionTranslator.toNamingException(Exceptio
nTranslator.java:42)
at weblogic.jndi.WLInitialContextFactoryDelegate.toNamingException(WLIni
tialContextFactoryDelegate.java:788)
at weblogic.jndi.WLInitialContextFactoryDelegate.pushSubject(WLInitialCo
ntextFactoryDelegate.java:682)
at weblogic.jndi.WLInitialContextFactoryDelegate.newContext(WLInitialCon
textFactoryDelegate.java:469)
at weblogic.jndi.WLInitialContextFactoryDelegate.getInitialContext(WLIni
tialContextFactoryDelegate.java:376)
at weblogic.jndi.Environment.getContext(Environment.java:315)
at weblogic.jndi.Environment.getContext(Environment.java:285)
at weblogic.jndi.WLInitialContextFactory.getInitialContext(WLInitialCont
extFactory.java:117)
at javax.naming.spi.NamingManager.getInitialContext(Unknown Source)
at javax.naming.InitialContext.getDefaultInitCtx(Unknown Source)
at javax.naming.InitialContext.init(Unknown Source)
at javax.naming.InitialContext.<init>(Unknown Source)
at oracle.oats.server.jndi.JndiLookup.createInitialContextInternal(Unkno
wn Source)
at oracle.oats.server.jndi.JndiLookup.createInitialContext(Unknown Sourc
e)
at oracle.oats.server.jndi.JndiLookup.createInitialContext(Unknown Sourc
e)
at oracle.oats.app.session.SessionClient.initSession(SessionClient.java:
104)
at oracle.oats.app.controller.client.ControllerClient.initController(Con
trollerClient.java:262)
... 5 more
Caused by: java.lang.SecurityException: User: weblogic, failed to be authenticat
ed.
at weblogic.common.internal.RMIBootServiceImpl.authenticate(RMIBootServi
ceImpl.java:116)
at weblogic.common.internal.RMIBootServiceImpl_WLSkel.invoke(Unknown Sou
rce)
at weblogic.rmi.internal.BasicServerRef.invoke(BasicServerRef.java:667)
at weblogic.rmi.internal.BasicServerRef$1.run(BasicServerRef.java:522)
at weblogic.security.acl.internal.AuthenticatedSubject.doAs(Authenticate
dSubject.java:363)
at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:
146)
at weblogic.rmi.internal.BasicServerRef.handleRequest(BasicServerRef.jav
a:518)
at weblogic.rmi.internal.wls.WLSExecuteRequest.run(WLSExecuteRequest.jav
a:118)
at weblogic.work.ExecuteThread.execute(ExecuteThread.java:209)
at weblogic.work.ExecuteThread.run(ExecuteThread.java:178)
Please make sure the OLT server is running!
ThanksThis issue was resolved after changing the user name to "oats" this is the user name of weblogic server and not the OATS console.
-
[Help] Weblogic throws exception under load testing
Hello All,
I have developed an application using struts 1.1 framework and deployed
it on weblogic 8.1. The application works fine. But when we load test
the application, weblogic throws an exception. I am not able to
understand why is weblogic throwing this exception. The exception
doesn't originate from my code
I am using struts 1.1 on BEA weblogic 8.1 on HP-UX 11i.
Please help me ... I will be very gratefull for your help.
Here is the stack trace :
<Jan 15, 2004 10:02:28 PM IST> <Error> <HTTP> <BEA-101020>
<[ServletContext(id=28318025,name=testWebApp,context-path=/testWebApp)]
Servlet failed with Exception java.lang.NullPointerException
at
weblogic.servlet.internal.ServletStubImpl$ServletInvocationAction.run(Se
rvle
tStubImpl.java:1053)
at
weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubImpl.
java
:387)
at
weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubImpl.
java
:305)
at
weblogic.servlet.internal.RequestDispatcherImpl$ForwardAction.run(Reques
tDis
patcherImpl.java:382)
at
weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSu
bjec
t.java:317)
at
weblogic.security.service.SecurityManager.runAs(SecurityManager.java:118
at
weblogic.servlet.internal.RequestDispatcherImpl.forward(RequestDispatche
rImp
l.java:286)
at
org.apache.struts.action.RequestProcessor.doForward(RequestProcessor.jav
a:10
69)
at
org.apache.struts.tiles.TilesRequestProcessor.doForward(TilesRequestProc
esso
r.java:274)
at
org.apache.struts.action.RequestProcessor.processForwardConfig(RequestPr
oces
sor.java:455)
at
org.apache.struts.tiles.TilesRequestProcessor.processForwardConfig(Tiles
Requ
estProcessor.java:320)
at
org.apache.struts.action.RequestProcessor.process(RequestProcessor.java:
279)
at
org.apache.struts.action.ActionServlet.process(ActionServlet.java:1482)
at
org.apache.struts.action.ActionServlet.doGet(ActionServlet.java:507)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:740)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
at
weblogic.servlet.internal.ServletStubImpl$ServletInvocationAction.run(Se
rvle
tStubImpl.java:1053)
at
weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubImpl.
java
:387)
at
weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubImpl.
java
:305)
at
weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.r
un(W
ebAppServletContext.java:6310)
at
weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSu
bjec
t.java:317)
at
weblogic.security.service.SecurityManager.runAs(SecurityManager.java:118
at
weblogic.servlet.internal.WebAppServletContext.invokeServlet(WebAppServl
etCo
ntext.java:3622)
at
weblogic.servlet.internal.ServletRequestImpl.execute(ServletRequestImpl.
java
:2569)
at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:197)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:170)
Regards,
Abhishek.Hello All,
I have developed an application using struts 1.1 framework and deployed
it on weblogic 8.1. The application works fine. But when we load test
the application, weblogic throws an exception. I am not able to
understand why is weblogic throwing this exception. The exception
doesn't originate from my code
I am using struts 1.1 on BEA weblogic 8.1 on HP-UX 11i.
Please help me ... I will be very gratefull for your help.
Here is the stack trace :
<Jan 15, 2004 10:02:28 PM IST> <Error> <HTTP> <BEA-101020>
<[ServletContext(id=28318025,name=testWebApp,context-path=/testWebApp)]
Servlet failed with Exception java.lang.NullPointerException
at
weblogic.servlet.internal.ServletStubImpl$ServletInvocationAction.run(Se
rvle
tStubImpl.java:1053)
at
weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubImpl.
java
:387)
at
weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubImpl.
java
:305)
at
weblogic.servlet.internal.RequestDispatcherImpl$ForwardAction.run(Reques
tDis
patcherImpl.java:382)
at
weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSu
bjec
t.java:317)
at
weblogic.security.service.SecurityManager.runAs(SecurityManager.java:118
at
weblogic.servlet.internal.RequestDispatcherImpl.forward(RequestDispatche
rImp
l.java:286)
at
org.apache.struts.action.RequestProcessor.doForward(RequestProcessor.jav
a:10
69)
at
org.apache.struts.tiles.TilesRequestProcessor.doForward(TilesRequestProc
esso
r.java:274)
at
org.apache.struts.action.RequestProcessor.processForwardConfig(RequestPr
oces
sor.java:455)
at
org.apache.struts.tiles.TilesRequestProcessor.processForwardConfig(Tiles
Requ
estProcessor.java:320)
at
org.apache.struts.action.RequestProcessor.process(RequestProcessor.java:
279)
at
org.apache.struts.action.ActionServlet.process(ActionServlet.java:1482)
at
org.apache.struts.action.ActionServlet.doGet(ActionServlet.java:507)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:740)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
at
weblogic.servlet.internal.ServletStubImpl$ServletInvocationAction.run(Se
rvle
tStubImpl.java:1053)
at
weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubImpl.
java
:387)
at
weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubImpl.
java
:305)
at
weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.r
un(W
ebAppServletContext.java:6310)
at
weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSu
bjec
t.java:317)
at
weblogic.security.service.SecurityManager.runAs(SecurityManager.java:118
at
weblogic.servlet.internal.WebAppServletContext.invokeServlet(WebAppServl
etCo
ntext.java:3622)
at
weblogic.servlet.internal.ServletRequestImpl.execute(ServletRequestImpl.
java
:2569)
at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:197)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:170)
Regards,
Abhishek. -
Errors while running load test scripts in Oracle Load Test
I am a QA Analyst and this is my first time using the Oracle Load Test application. Acutally this is the first time I have done anything related to load test scripts. The Oracle Load Test version I am using is 9.10.0219. When I run some of the scripts with a user ramp up of 1 user per step, the load tests complete successfully. When I begin to adjust the number of VUs per step to 2 or more, I begin to get some of the following errors. By the looks of these errors can you provide any feedback as to whether these are issues with OLT or with the application I am running the load test against? Any help would be greatly appreciated.
Thanks
John
- ThinBrowserException occurred. HTTP response code: 500 Internal Server Error
- VariableNotFoundException occurred. Variable "web.jscript.httplbosinl1cccsmo_2468" not found for string: http://lbosinl1.ccc.smo.com:9595/Tmo/H5/portal/lipo_portal/{{web.jscript.httplbosinl1cccsmo_2468,Scenario}}
- VariableNotFoundException occurred. Variable "web.jscript.httplbosinl1cccsmo_5617" not found for string:
{{web.jscript.httplbosinl1cccsmo_1984,Suif_Context_Period_Date}}=
{{web.jscript.httplbosinl1cccsmo_5617,12/05/2010}}Hi,
It looks like an application issue since you are getting a HTTP 500. The other errors relate to the fact that ti can't resolve some dynamic values in needs to extract from the resonse content since the pages are different (probably due the 500 error).
Regards,
Jamie -
How can I do the load test for EBS 11i
Dear Suport
I start to try OATS.
I have used a Openscript to record the functional test and it works fine for EBS 11i.
However, I cannot directly use the script from Functional Test. Is there have any ways to convert the Functional Testing script to Load Testing script?
Since the fail of using functional script, I create a new Load Testing script in Openscript and record what I do in functional test. However, I got the below error when I record the script.
!ENTRY oracle.oats.scripting.modules.http.proxyRecorder.ProxyRecorderQueueRunnable 2 0 2010-01-06 11:42:07.354
!MESSAGE Could not determine request character set for http://localhost:8088/olt/ConnectToServer.do, referer=http://localhost:8088/olt/BuildScenario.do
!ENTRY oracle.oats.scripting.modules.browser.api.javaHelper.Installer 4 0 2010-01-06 11:42:58.678
!MESSAGE formsRecorder.jar does not exist in C:\Program Files\Java\jre6\lib\ext
I have tried to copy the file, formsRecorder.jar, from C:\OracleATS\OpenScript\openscript_configuration\org.eclipse.osgi\bundles\56\1\.cp\lib to C:\Program Files\Java\jre6\lib\ext
However, the file, formsRecorder.jar, will be deleted when record the test by openscript. (Antivirus too is disabled during record the script).
Do you have any idea for record the Load Testing script by Openscript?
Regards
Sidney WongTry the trial version of HTML Optimizer - it will optimize 50% of your files and may convince you that optimizing is your best chance to get your site to load in IE unless you want to drastically reduce your page file sizes.
Maybe you are looking for
-
Lack of Service in Camp Pendleton, CA!!!!!
I am not sure how the rest of Verizon users feel, but for me, when I am paying nearly $200 dollars a month for 2 phones, I expect a certain level of satisfaction with the service provided. The issue is that when you work and live on Camp Pendleton an
-
I am trying to download an attachment from gMail. When I select download, I can open or save as the document. If I select "open", it opens the file, but makes it read only. If I do this exact action in IE8, it opens the document normally.
-
How to put Azure blob Storage service off-line
I am doing a migration and like to make sure Azure Storage service is off-line to make sure no content is pointing to this account before deleting exiting Storage account. Please help.
-
Itunes 10 keeps crashing and asking me to sign in for automatic downloads
Hi since upgrading to mountain lion and updated Itunes last week, every time i switch on my IMac Itunes opesn and automatically and keeps asking me to sign in to use this computer for Automatic Downloads. I can enter the password 10+ times but it sti
-
Please I want to cancel a purchase made with a number that has MHVSS8877
PLEASE I NEED TO CANCEL A PURCHASE MADE WITH A NUMBER THAT HAS MHVSS8877