Localize web part titles using Display template in O365

Hi,
I have requirement to localize web part titles in my projects using Display template.
Can anyone please tell me how can be this done .
Thanks in advance for your great help.
Regards,
Avinash Kumar

Hi Avinash,
According to your description, my understanding is that you want to localize web part titles using Display template.
Here is a detailed article for your reference:
http://msdn.microsoft.com/en-us/library/office/gg491702(v=office.14).aspx
Best Regards
Zhengyu Guo
TechNet Community Support

Similar Messages

Table of contents web part doesn't display all data

Hi,
We did a test migration from Sharepoint 2007 to SharePoint 2013. There is a Table of contents web part that is being used to display all of the team sites (more than 25). In the SharePoint 2013 version, the TOC web part is not displaying all of the sites.
Any ideas of how to make it show all?
thanks,
Sherazad

Hi Sherazad,
According to your description, my understanding is that you want to display all sites in the Table Of Content web part.
There is a limitation of the web part, the maximum number of the items displaying in the web part is 50. If you want to display more 50 items, you need to increase or remove the limitation. You need to go to the web.config file of the SharePpoint site, the
path is C:\inetpub\wwwroot\wss\VirtualDirectories\port number, then find all navigation providers, and add
DynamicChildLimit attribute to each one . More information, please refer to the link below:
http://praveenbattula.blogspot.in/2010/11/table-of-contents-web-part-remove-max.html
Note: before changing web.config, please make a backup for the file.
After the above, if your issue still exists, please open your site->Site Settings->Navigation, change the value from 20 to [whatever number you want to display] in the “Current Navigation”section. More information,
please refer to the link:
http://www.chaitumadala.com/2010/05/sharepoint-2010-table-of-contents.html
I hope this helps.
Thanks,
Wendy
Wendy Li
TechNet Community Support

Web Part Title Style

How do we change style of Web part title

Hi Jugnu,
You can use the IE developer tool (by pressing F12 key) to get the HTML source of particular selection and get the class name / DIV ID or any other unique value to identify that portion. Use that unique identity to change the style of Web part title or any
other design and you can write the code snippet in Content editor Web Part on that page.
<style type="text/css">
#WebPartTitleWPQ3 h2
background:red !important;
color:gray !important;
</style>
Vivek Jagga - MCTS SharePoint 2010
My Blog

Web Part Title Bar image

I can't believe no one has asked about this, but my search
came up empty.
How does one change the tiny (16x16) image on the Web Part
Title Bar? I see where to set the title, but not the image.

.oO(Michael Palmer Photo)
>
quote:
Originally posted by:
Newsgroup User
> .oO
>
> But even without knowing the proper name finding it
should have been
> quite easy. Just throw something like title bar icon or
address bar icon
> at any search engine you like ...
>
> Micha
>
>
> Actually I did and did get anything I understood and
certainly not in terms of
>what Dreamweaver can do for me automatically. I found out
from an MS page that
>it was in fact called a "Web Part Title Bar image", but
even knowing that
>didn't get me any further.
Strange term ... must be MS-speak. ;)
> Dreamweaver has a place for the title, but nowhere does
it mention the image
>that is next to it on web sites. On this forum the terms
"title image" came
>up with nothing.
Most people refer to it as the "address bar icon", which
returns a lot
of useful results on Google.
> I apologize if I asked a question that had been answered
before, but sometimes
>knowing how to phrase the question to find the answers
can be tricky.
No reason to apologize. I know that sometimes finding the
right words
can be difficult if you don't actually know what to search
for. In this
case it just seemed quite easy and straightforward to me ...
but anyway.
Micha

Using Visio Web Access Web Part to dynamically display visio drawings in document library according to which folder a user is viewing

I have a document library web part in SharePoint 2010. There is also a Visio Web Access Web Part on the same site, side by side with the doc lib. In the folder structure of the document library web part (it is pretty complex and a few levels deep),
each folder contains one and one only Visio diagram. I want the Visio web access web part to display the visio drawing that exists in what ever folder the user is currently browsing. For example.. if the file structure is as follows below and a user clicks
on folder A from the list I would like the Visio Web Access web part to display the visio diagram that lives in folder A. Same for any folder at all anywhere in the structure that the user is viewing, dynamically changing as the user browses the directory.
Is this possible?
1.0 Folder A
1.1 Word Doc
1.2 Visio Doc
1.3 Folder a.1
    1.3.1 Word Doc
    1.3.2 Visio Doc
    1.2.3 PDF Doc
    1.2.4 Folder
2.0 Folder B
2.1 Word doc
2.2 Visio doc
2.3 pdf doc
2.4 Folder B.1

Got this to work. Made a new data view in a designer for document library. Created parameter and used it to filter the data view. Then I connected the visio's shape data to the parameter and OOB sorting and filtering works as expected.

How to Resolve Can not Display Web part error using CQWP and a blog

I have a SharePoint 2010 site with a home page that has a CQWP (content Query Web Part) tied to the most recent blog of blog site with a list of blogs.  Randomly, some clients will experience a "Unable to display
a web part". Our client machines are set up with Roaming profiles that are PKI enabled. Some users are always able to see the resulting blog on the home page, while other users, experience sporadic ability to see the blog ----getting a
"Unable to display web part".  Also a client can be on one machine and get the error and then log on to another machine and not get the error. Its also seems that when a new blog is added to the blog list this is when the
ability to see the blog on the home page may come up as an error. Our setup is simple:   show items= list/posts, List type=Posts, Content Type Group= List Content Type, Content type=Posts, no audience targeting, not additonal filters,
group items by = None Descending, #columns =1, sort items by =published -descending   Limit # display items = 1, Gropup style = Default, itemstyle= image on left, yes play media links, Fields to display = titlt
and Description (body)
What kind of things could cause the random behavior?

Hi,
According to your description, my understanding is that the error occurred occasionally with the Content Query web part.
I tested the same scenario in my environment, and the web part worked fine.
I recommend to verify the things below:
Did this issue occur with all the Content Query web part? I recommend to create a new Content Query web part to see if the issue still occurs.
Did this issue occur with all the users who have permission to view the web part?
Deactivate the Publish feature and then re-activate it to see if the issue still occurs.
Check the ULS log for detailed error message.
Best regards.
Thanks
Victoria Xia
TechNet Community Support

Problems with some web parts when using XSLT

I have a page on which I have several web parts. Some web parts are custom while others are OOB and only XSLT is applied on them.
I am using 2 WFEs with NLB. Problem is when I do iisreset on one of the WFE then the OOB web parts with XSLT start giving error. You know the standard error "corelation ID....bla bla bla". Anyway the error automatically goes away after a 2, 3 minutes.
So basically if I do iisreset or stop the iis, and then load that page, then all custom web parts load fine except those OOB web parts with XSLT. And then they too start working fine after 2, 3 minutes if I reload page.
What could be the reason for that? Looks like some service on which XSLT depends take time to load!? And once that service is loaded then they start working fine? Or it could be due to distributed cache or something!?

Hi Frank,
Which version of the SharePoint 2010 did you use?
In June 2011 CU code was added to the DataFormWebPart (which is used to display list data) that if an XSLT transform took longer than 5 seconds, a StackOverflowException was thrown. This was done to avoid
a potential Denial Of Service attack on SharePoint if crafted XML could be sent that would continually clog up the XSLT, thereby stopping pages from rendering.
In August 2011 CU the transform "timeout" was reduced from 5 seconds to 1.
So, any list with XSLT that takes longer than 1 second to parse in an XSLT transform goes *boom*.
After you perform an IIS reset , the cache of the page was cleared and you encountered the error. Once the page is cached, there is no error.
You can try to set up XSLT Timeout with the following PS commands:
$farm = Get-SPFarm
$farm.XsltTransformTimeOut = 5
$farm.Update()
Reference:
http://social.msdn.microsoft.com/Forums/sharepoint/de-DE/44cfd798-be7a-4436-8786-bd44049e7def/sp2010-column-filter-causing-unable-to-display-web-part-error-and-a-stack-overflow-exception?forum=sharepointgeneralprevious
Best Regards,
Eric
Eric Tao
TechNet Community Support

How to Show Image form Library with Thumbnail view on visual Web part page using XsltListView web part?

<WebPartPages:XsltListViewWebPart ID="XsltListViewWebPart_AppWeb"
runat="server" ListUrl="Lists/MyList" IsIncluded="True"
NoDefaultStyle="TRUE" Title="XsltListView web part" PageType="PAGE_NORMALVIEW"
Default="False" ViewContentTypeId="0x">
</WebPartPages:XsltListViewWebPart>
For any List it work fine but for Image form library its not working:
My url: http://sitename:portname/PublishingImages/Forms/AllItems.aspx
Please provide Solution.
Question:How To show image library with thumbnail view in Visual Webpart using xslt webpart.

Is it throwing any error?
do you set correctly the ListUrl parameter? in this case it will be "PublishingImages"

Content Query Web Part will not display all fields.

I would love some assistance on this. When I choose fields to display in the Web Part they do not appear. And I should say the the article "How to: Display Custom Fields in a Content Query Web Part" on the Developer Network is
a great start but it is only applicable to '07 and '10. Where is the detailed info for SP 2013??

Hi,
According to your description, my understanding is that you want to display custom columns in Content Query web part in SharePoint 2013.
Per my knowledge, the method for SharePoint 2013 to display custom columns in Content Query web part is the same with SharePoint 2010.
The method in the link below is also can be used for SharePoint 2013:
http://msdn.microsoft.com/en-us/library/ms497457(v=office.14).ASPX
Do you encounter any issue when customizing in in a Content Query Web Part?
Here are some links about customizing the ItemStyle.xsl to display custom columns in Content Query web part in SharePoint 2013 for you to take a look:
http://prafulgoyal.blogspot.in/2013/04/sharepoint-content-query-webpart-oob.html
http://social.msdn.microsoft.com/Forums/en-US/49739730-47c1-43df-9d0e-ad506e6ca31b/display-multiple-columns-in-content-query-webpart
http://social.msdn.microsoft.com/Forums/en-US/1484df2b-0fb9-4b58-b833-a75019db88c7/content-query-display-multiple-columns?forum=sharepointgeneral
Best regards.
Thanks
Victoria Xia
TechNet Community Support

SharePoint Content Query Web Part Title Field

SharePoint 2013
I have a custom list on another site within SharePoint. How do I bring in all the columns? I see the title field on the Edit Web Part, but no matter how hard I try, I can't get multiple columns to show up. Some of the Columns I am looking for from
the Custom List:
City
Vendor
Circuit ID
Thanks,
Chris

Amit,
Thanks for the links, but I am still missing something with the coding. I am following the first link you gave me.
These are the instructions from the page
In ContentQueryMain.xsl
Locate “ <xsl:template name=”OuterTemplate.CallItemTemplate”> “
Add:
<xsl:template name="OuterTemplate.CallItemTemplate">
<xsl:param name="CurPosition" />
<xsl:param name="LastRow" />
and add:
<xsl:when test="@Style='MyTask'">
<xsl:apply-templates select="." mode="itemstyle">
<xsl:with-param name="CurPos" select="$CurPosition" />
<xsl:with-param name="Last" select="$LastRow" />
</xsl:apply-templates>
</xsl:when>
Search:
<xsl:template name=”OuterTemplate.Body”>
And scroll down to add this line:
<xsl:call-template name="OuterTemplate.CallItemTemplate">
<xsl:with-param name="CurPosition" select="$CurPosition" />
<xsl:with-param name="LastRow" select="$LastRow"/>
</xsl:call-template>
What I don't know is where exactly to add the middle section in my xsl document. Here is what I think I should have. And the Circuit list below is another attempt at this too that has been unsuccessful.
<xsl:template name="OuterTemplate.CallItemTemplate">
<xsl:param name="CurPosition" />
<xsl:param name="LastRow" />
<xsl:value-of disable-output-escaping="yes" select="$BeginListItem" />
<xsl:choose>
<xsl:when test="@Style='NewsRollUpItem'">
<xsl:apply-templates select="." mode="itemstyle">
<xsl:with-param name="EditMode" select="$cbq_iseditmode" />
</xsl:apply-templates>
</xsl:when>
<xsl:when test="@Style='NewsBigItem'">
<xsl:apply-templates select="." mode="itemstyle">
<xsl:with-param name="CurPos" select="$CurPosition" />
</xsl:apply-templates>
</xsl:when>
<xsl:when test="@Style='NewsCategoryItem'">
<xsl:apply-templates select="." mode="itemstyle">
<xsl:with-param name="CurPos" select="$CurPosition" />
</xsl:apply-templates>
</xsl:when>
<xsl:when test="@Style='MyTask'">
<xsl:apply-templates select="." mode="itemstyle">
<xsl:with-param name="CurPos" select="$CurPosition" />
<xsl:with-param name="Last" select="$LastRow" />
</xsl:apply-templates>
</xsl:when>
<xsl:otherwise>
<xsl:apply-templates select="." mode="itemstyle">
</xsl:apply-templates>
<xsl:when test="@Style='CircuitList'">
<xsl:apply-templates select="." mode="itemstyle">
<xsl:with-param name="CurPos" select="$CurPosition" />
<xsl:with-param name="Last" select="$LastRow" />
<xsl:with-param name="StartNewGrp" select="$StartNewGroup" />
</xsl:apply-templates>
</xsl:when>
</xsl:otherwise>
</xsl:choose>
<xsl:value-of disable-output-escaping="yes" select="$EndListItem" />
</xsl:template>
I think I am getting close and your help is much appreciated.

How to refresh Report viewer web part programatically using C# in SharePoint?

I have used Report viewer web part in SharePoint page, I want to refresh it programmatically. How can I achieve this? I have tried approach mentioned on
http://nicholasfaiello.wordpress.com/2012/12/28/report-viewer-web-part-programmatically-refresh-a-report/ site, but it is not working.

Hi,
How about using JavaScript to perform page reloaded or just trigger the click event of the refresh button with the Report View Web Part? It could be seen as a kind of workaround
for auto refreshing.
http://social.technet.microsoft.com/Forums/sharepoint/en-US/b0b6d11d-07c8-4b4d-bd69-ec60e85e0678/sharepoint-report-viewer-web-part-parameter-issue-not-refreshing?forum=sharepointgeneralprevious
http://richmintzbi.wordpress.com/2011/06/21/auto-refresh-ssrs-reports-part-ii/
Best regards
Patrick Liang
TechNet Community Support

Edit Display Templates missing controls

Hi,
I'm having problems working with Search Display Templates on SharePoint Online. It started when I uploaded and published two new templates. When I edit the properties of a Search Results Web Part to use these templates, they are not appearing in the Display
Templates dropdowns (Results Control Display Template and Item Display Template).
Going to the Design Manager: Edit Display Templates page, there are no controls displayed at the top to enable me to manage the Display Templates. On other sites there are 'New, Upload, Actions and Settings' actions available.
I'm suspicious that the two issues are linked. I've compared features on the site collection that works and the one that doesn't - both on the same tenancy - and they both have the same features enabled at a site collection and site level. I also have
the same permission level on both sites.
Does anyone know what I'm doing wrong?
Many thanks,
Colin
Best wishes, Colin

Hi Colin,
Please go to Design Manager->Edit Display Templates page, and check whether the
Approval Status of the two all are Approved. If not, please click the ECB menu->Publish a Major Version to publish them.
Like the screenshot:
Best Regards,
Wendy
Forum Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected]
Wendy Li
TechNet Community Support

Display Error: The display template had an error. You can correct it by fixing the template or by changing the display template used in either the Web Part properties or Result Types. $(...).slick is not a function (OnPostRender: )

Hi Team,
I implemented news carousel using display template concepts.
Its working.
But some times it shows like some thing went wrong
when clicke on show details
it showing the error like
Display Error: The display template had an error. You can correct it by fixing the template or by changing the display template used in either the Web Part properties or Result Types.
$(...).slick is not a function (OnPostRender: )
some times showing result and while refreshing the page am getting the error like below
How to fix the issue
Regards,
Dhayanand

Hi Wendy Li,
Finally we fixed.
The prob is that we referring two different version of jquery files in master page and page layout.
We corrected by referring same version of jquery files in both pages
Regards,
Dhayanand

Web Part Error: A Web Part or Web Form Control on this Page cannot be displayed or imported.

SharePoint 2007 custom (VS 2008) solution is upgraded to SharePoint 2013 using (VS 2012). I followed this approach.
I had created new empty project (solution) in SharePoint 2013 using (VS 2012) compiled and deployed successfully. All safe controls are registered in the web.config file. After deploying solution i Restarted IIS also, still getting this error. How to resolve
Error
Web Part Error: A Web Part or Web Form Control on this Page cannot be displayed or imported. The type could not be found or it is not registered as safe. Correlation ID: 5d217c9c-1827-7083-80cd-e095a30befee.
Show Error Details
Hide Error Details
[UnsafeControlException: A Web Part or Web Form Control on this Page cannot be displayed or imported. The type could not be found or it is not registered as safe.]
at Microsoft.SharePoint.ApplicationRuntime.SafeControls.GetTypeFromGuid(Boolean isAppWeb, Guid guid, Guid solutionId, Nullable`1 solutionWebId, String assemblyFullName, String typeFullName, Boolean throwIfNotSafe)
at Microsoft.SharePoint.WebPartPages.SPWebPartManager.CreateWebPartsFromRowSetData(Boolean onlyInitializeClosedWebParts)
<menu class="ms-hide" id="MSOMenu_WebPartMenu"><ie:menuitem id="MSOMenu_Minimize" text="Minimize" title="Collapse this web part." type="option"></ie:menuitem><ie:menuitem
id="MSOMenu_Restore" text="Restore" title="Expand this web part." type="option"></ie:menuitem><ie:menuitem id="MSOMenu_Close" text="Close" title="Close this Web Part. You can still
find it under closed Web Parts section in the insert ribbon. These changes will apply to all users." type="option"></ie:menuitem><ie:menuitem iconsrc="/_layouts/15/images/DelItem.gif" id="MSOMenu_Delete" text="Delete"
title="Delete this Web Part from the page. These changes will apply to all users." type="option"></ie:menuitem><ie:menuitem type="separator"></ie:menuitem><ie:menuitem iconsrc="/_layouts/15/images/EditItem.gif"
id="MSOMenu_Edit" text="Edit Web Part" title="Change properties of this shared Web Part. These changes will apply to all users." type="option"></ie:menuitem><ie:menuitem id="MSOMenu_Connections"
text="Connections" title="Show connections options for this Web Part. These changes will apply to all users." type="option"></ie:menuitem><ie:menuitem type="separator"></ie:menuitem><ie:menuitem
id="MSOMenu_Export" text="Export..." title="Export this Web Part. These changes will apply to all users." type="option"></ie:menuitem><ie:menuitem iconsrc="/_layouts/15/images/HelpIcon.gif" id="MSOMenu_Help"
style="display:none;" text="Help" type="option"></ie:menuitem> </menu>

Hi Ashok,
According to your description, my understanding is that you got an error after you re-built a SharePoint 2007 solution with VS2012, and deployed it.
Make sure the Namespace and Type Name are consistent across all files where indicated. Also with matching case sensitivity. Verify web.config file and assembly in GAC or virtual directory bin folder in post deployment.
More information, please refer to the link below:
http://roykimsharepoint.wordpress.com/2013/04/27/classic-web-part-errors/
Here is a similar post for you to take a look at:
http://stackoverflow.com/questions/1689707/sharepoint-web-part-type-could-not-be-found-registered-as-safe
I hope this helps.
Thanks,
Wendy
Wendy Li
TechNet Community Support

Internet Explorer 11 and SharePoint 2013 Standard - Web Parts and Calendar Don't Display/Render Correctly

Hello everyone.
I am currently running a fully patched (Service Pack 1) version of SharePoint Standard 2013 On Premises. I am having 2 problems that are reproducible on both Windows 7 and Windows 8.1 on multiple computers when running Internet Explorer 11 (fully updated
through Windows Update). The issues are "fixed" when running compatibility view in the browser or using Chrome/Firefox.
The issues are as follows:
Issue 1 Calendar view does not display correctly
Issue 2 Web parts do not display correctly when editing a page.
Picture of calendar
Webpart "edit menu dropdown" in upper right corner is replaced with 2 up arrows. Clicking minimizes web part.
Is there any word on a fix for this? Is this something only I am experiencing? Is there an issue with my SharePoint server? I would hate to have to uninstall IE11 from 300 machines and install IE10.
Thanks

There are a few critical issues
Pages will not enter edit mode. You will click Settings > Edit Page and the page will simply refresh but will not change over into edit mode. Seems to only affect pages with
Web Part Zones.
Calendar will not enter edit mode.
Web Part Properties cannot be modified. If you are able to get into edit mode (you can edit wiki pages) you will not be able to modify existing Web Parts by using the Web Part
Properties panel. Instead you will see a really weird collapse button that looks like it is coming from the mobile view but you cannot modify web part properties… even through the ribbon controls.
I cannot use the import spreadsheet app, the error says it is not supported with the current browser.
When I hoover over a “people” field I cannot see their information.
I had all these capabilities with IE9
This suggestion I found online appears to fix issues 1-3.
http://windowsitpro.com/windows-7/fixing-most-not-all-ie11-compatibility-problems
To run in compatibility mode
Press ALT + T when viewing your      SharePoint page
Click Compatibility View Settings      in the menu that appears
Click Add to add the current      SharePoint site to your list of compatibility view pages
Click Close

Localize web part titles using Display template in O365

Similar Messages

Maybe you are looking for