Mail randomly choosing which messages to display

I have a problem with the desktop version of Mail, where it randomly stops displaying message content. A message will come in, but when i click on it nothing displays in the window. Quitting and re-booting the application solves this, but it means quitting and re-booting several times per day. And this doesn't happen on the iOS versions. Everything works fine there, so it doesn't seem to be on the server side, for instance.
re-building doesn't help, btw.
Any advice appreciated

Try re-indexing the mailboxes. This can take awhile if you have a lot of mail.
Reindex messages      Mavericks/Yosemite

Similar Messages

  • How do I choose which tags are displayed in Apple TV ?

    There are numerous tags availabe to update for a movie (or TV series) via iTunes.
    However, I would like to choose which tags are actually displayed on my Apple TV.
    How do I customise which tags to view ?

    If you have any suggestions that you think might enhance the Apple TV you can send Apple your feedback here 

  • How to dynamically choose which view to display in second step

    Hi Guys,
    I am just started to evaluate fpm to decide whether to use it in our project. So i have question that might be very simple to you all, that i hope you all can help me with.
    Say i want to use the fpm GAF with a single webdynpro component. I have 3 steps, first step display a dropdown list for user to choose, second step will be a view that will depend on user input on the first step and 3rd step just a confirmation screen.
    I plan to use UIBB for all the screen, not using the GUIBB. So i will need to dynamically decide which view to show on step 2, and since we don't call navigation plug when we use fpm, what is the best way to archive this? How do i design my webdynpro component and the fpm configuration etc...?
    I read from the programming guide about initial screen and variant. But what if my application doesn't need an initial screen and the user choosing step is not at the first step, I can't use variant in this case right?
    thanks.

    Hi
    You can give the dropdown on initial screen and than u can decide which screen  to show on the second (or infact that will we the first step you you have first step as a initial screen.
    How?? :
    1. Create different varients for the second step.
    2. Basis on the Value choosen in the dropdown list, select the appropriate varient using the following code.
      TRY.
            CALL METHOD io_gaf->set_variant
              EXPORTING
                iv_variant_id = 'VAR_CLIENT'.
          CATCH cx_fpm_floorplan .
        ENDTRY.     
    where  VAR_CLIENT  is your varient.
    Hope this will help you.
    Thanks & Regards,
    Arvind

  • Can I choose which of my displays to share?

    I am a teacher and would like to present a PowerPoint presentation both through a projector and on ~20 student computers.  When I launch the slide show in Powerpoint, I see the presenter's view (with notes) on my machine, which is great, and the presentation view (full screen) through the projector, which is also great.  The problem is that the students see the presenter's view.  Is there any way to share not my screen but the screen being sent to the projector?
    Thank you.

    The Cloud forum is not about using individual programs
    The Cloud forum is about the Cloud as a delivery & install process
    If you will start at the Forums Index https://forums.adobe.com/welcome
    You will be able to select a forum for the specific Adobe product(s) you use
    Click the "down arrow" symbol on the right (where it says All communities) to open the drop down list and scroll

  • Customize Which Column to Display from UDT in UDF when Linked to UDT

    Problem:
    I have a UDF that links to a UDT. The problem is that when I select the UDF, it only displayes the columns from the UDT Code & Name. And for our purposes Code & Name are meaningless data points.
    Question:
    Can I choose which column is displayed from the UDT in the UDF?
    Please see the attached image. THANKS!

    Hi,
    This is SAP B1 standard behavior, But you can change name as terminal code. Other wise you can  detach the UDT from UDF and then assign one FMS in the UDF for serach terminal code instead of code and name.
    Hope this will work.
    Regards
    Sridharan

  • I have 4 email accounts in apple Mail.  My mail is sending from the wrong account.  even on "reply" it sends from a different account.  I have 3 gmail accounts and one exchange server account. I choose which account to send from and it still sends from a

    I have 4 email accounts in apple Mail.  My mail is sending from the wrong account.  even on "reply" it sends from a different account.  I have 3 gmail accounts and one exchange server account. I choose which account to send from and it still sends from the same gmail account.  Help.

    I HAD two accounts because of this problem.  I completely removed the problem account from the Apple Mail client.  Guess what is happening??  That's right - Mail is still sending from the other account that no longer exists on my computer, and I have absolutely no idea how this is happening.  This is incredibly frustrating.  When a recipient chooses to reply to my message, quite often I won't get it now because it is going to the other account that has now been deleted from my system.  COME ON APPLE!!! WHAT'S THE DEAL WITH THIS???

  • Several contacts have the same email address. How can I choose which contact name appears on the address line in Mail?

    Several contacts have the same email address. How can I choose which contact name appears on the address line in Mail?

    you can't really, but you might be able to filter them by message content into folders for each, or color them with tags

  • 10.5.2 - Mail hangs; generally sluggish; messages don't display

    Since upgrading to 10.5.2, I'm experiencing various issues with Mail.app:
    • It takes a long time to launch, and often hangs without ever fully launching, requiring a force-quit and relaunch.
    • After launching, there's a general sluggishness throughout the app. The initial "checking for mail" sequence takes forever -- sometimes never completing.
    • Often, items I select take far longer than normal to display; messages I select aren't displayed at all; or mailboxes I select -- mailboxes that say they contain messages -- will display no messages. (This behavior is sometimes accompanied by the spinning beach ball, but not always.)
    • I sometimes have to force-quit and relaunch 3 or 4 times before I can actually use the app.
    Users on other forums have reported similar issues. Has anyone discovered a fix for these issues?
    Otherwise, Apple, we really need assistance, here. Needless to say, this is severely disruptive to our workflow and everyday lives.

    My issue turned out to be for more complex than I realized. In addition to Mail.app's sluggishness, all of my syncing (calendars, contacts, mail, bookmarks, iPhone) had also ground to a halt. In System Preferences>.Mac, I was unable to even select the "Sync" tab. (Doing so "crashed" the System Prefs window and made the processor run hot, which made the fan come on.) So, with Activity Monitor, I traced the problem to the Sync Server.
    A search, here in the discussions, led me to several users who had identical symptoms after installing Leopard or a Leopard update -- but no solutions. Finally I went to another Apple-related forum and found a solution. Someone there wrote:
    +"trashing the ~/Library/Application Support/SyncServices/Local/ folder did it... Usually touching that folder brings good karma..."+
    It seemed like a radical move, because on my MacBook Pro that folder contained over 500 megs of data (although I now suspect it was abnormally bloated). But I had everything backed up, so here's what I did:
    1. I moved the folder, referenced above, to my desktop. (Note that "~" indicates your home folder.)
    2. Restarted my macine.
    3. Opened the .Mac preference pane, then clicked "Sync"
    (Note: Previously, clicking "Sync" had been causing the Prefs window, so just being able to bring up that window was a huge victory.)
    4. Clicked the "Advanced" button, selected the MacBook Pro, then clicked "Reset Sync Data" and made sure that I was replacing data on .Mac with the data from the computer (which I knew was good data). In other words, I made sure that the animated arrow was moving away from the computer and toward .Mac, indicating the direction of the data transfer.
    (The folder I deleted in step 1 contained a lot of sync data. So without step #4, I was concerned that .Mac -- with its data having been deleted -- might have interpreted that as a signal to delete the data on the Mac. So I performed step #4 to make sure that didn't happen.)
    5. Then I clicked "Sync now."
    This was the first time I'd gotten sync to work for at least 36 hours. Also, after the sync was completed, the new "Local" folder, which replaced the one I deleted, only had 62 megs of data. Hence, my suspicion that the deleted folder was abnormally bloated.
    So far so good.... I've got sync, and Mail is launching much more quickly now. Fingers crossed, but everything seems to be working well.

  • How do I get incoming mail messages to display in plain text?

    Recently some incoming messages are virtually unreadable because they are in rich text format and render with incredibly small font size. They are mostly coming from work colleagues using Windows. Recently I upgraded yo Yosemite and they were upgraded to Windows 7: im not sure if either is relevant.
    I'm sure there's a trick somewhere to increase the viewing font size after the message displays, but I'd rather it displayed legibly in the first place...
    Any ideas?

    If I take the above preferences and change them from Arial 14 to Arial 144 I can get the body in about half of my current messages to display in 144 pt font.
    It varies by mail client of sender and to which mail box it goes to on my Mac.  Haven't found a commonality yet.
    Someone here will have a brilliant answer, however.

  • Mountain Lion Mail randomly deletes messages: locally and from server

    Hello,
    Mountain Lion Mail deletes mails randomly, locally and from the IMAP server.
    I have confirmed this for a fact:
    - I have been forwarded lost mails to another (webmail) account: the timestamps indicate that some mails were lost somewhere before I ever saw them on Mail
    - my mail service provider confirmed that their logs show mails that I never saw on Mail
    - the lost mails don't appear via webmail, either, i.e. they're not on the server
    Others are experiencing the same in Lion:
    http://www.seifi.org/email/lion-mail-app-deletes-imap-emails-without-notice-gmai l-important-fix.html
    https://discussions.apple.com/thread/3206902
    I became aware of this as my customer referred on the phone to messages from them that I had never seen. And, Mail deletes messages randomly from the IMAP server too - it's literally eating messages!
    No, this is not a rule issue. No, this is not anything I could have done to cause. This should be evident as very many others are experiencing the same (see the above links).
    This is the worst bug I've ever encountered in any Apple product.
    Apple need to acknowledge this and address it, like, immediately.
    Is there a fix for this? One that works 100% - I really can't risk not receiving business e-mail.
    br Janne

    I'm experiencing something similar. I see a message being received in Mountain Lion via notification. When I'm going to look for this mail, it's gone.
    I dont't have any rules set up and no mail plugins installed. The mail is also vanished from the server. I'm using IMAP on my own web-site (via a service provider). I was able to verify, that a certain message from a certain sender dissapeard, which had a PDF attached. I thought it might have something to do with my ISPs virus protection, but they a) insured me, that they don't delete any mail and b) I got a new mail from someone I don't know this morning. Again: Saw the notification, afterwards the mail is gone.
    For now, I will switch to ThunderBird (this was also the recommendation of my ISP).
    Kind regards
    Marco Heine

  • Can I choose which season artwork is used for display over the whole TV show?

    I have a TV show with multiple seasons and multiple album covers, but iTunes chooses one to display over the whole show list that I don't like. Is there some way to choose which season cover is displayed over my whole show, you know, WITHOUT changing all the album artworks of all the episodes?

    LaunchPad-Control was very useful to do exactly what you want on OS X Lion the developer has stated that there are problems when running on Mountain Lion and will not provide any support.
    Your only option now is to create folders with related applications.  Click on an application in Launchpad then drop it onto another thus creating a folder then rename the folder to something meaningful.

  • Does Firefox 3.6.8 on Mac OS X 10.6.4 support Juno Web Mail "new message center" display?

    Does Firefox 3.6.8 on Mac OS X 10.6.4 support Juno Web Mail "new message center" display?
    == URL of affected sites ==
    http://webmaila.juno.com/webmail

    Does this only occur with 10.6.8?  I just gave this a try on my 10.8.3 system with AIR 3.6 but couldn't reproduce the crash on quit.  However, I also was unable to log into the application due to lack of credentials.  Could you please open a bug on this over at bugbase.adobe.com?  If we need to log in to reproduce the bug, please send any test credentials to [email protected]  Once the bug has been entered, please let me know the bug number so I can attach the symbolicated crash log to the bug report.
    Thanks,
    Chris
    Ps.  If you haven't already, can you also try out our 3.7 beta build?
    3/26/2013 - AIR 3.7.0.1410 Runtime and SDK Beta

  • Mail.app randomly chooses incorrect mail alias when i reply to mails

    Hi
    Hope this makes sense. I have a few additional .mac mail aliases set up one in particular i use a lot for subscriptions to job sites and any other subscriptions. Problem i have is if i create a new mail and choose the alias from the pull down list and send it everything is fine, this is also true if someone sends a mail to that alias as well. Problems i'm continually having is that when i reply to a replied mail or an incoming one that's been sent to the alias occasionally but quite a lot i guess, the mail from address changes to my default main account and not the account the mail was sent to.
    This is so frustrating as my real account has been sent out to certain conpanies that i should'nt have because when i click reply it will disregard the mail alias it was sent to and just choose my default.
    it doesn't happen always but a lot. Anyone else seen this issue or have any suggestions? Just to clarify, my aliases work fine as do the option to choose and alias from the pull down list it's just when replying to a mail sent to that alias.
    Thanks for reading this far.
    Macca

    Hi Numbatfouram,
    I know how this works, let see if I can explain it!!...
    When you hit the "new" button to compose an outgoing email, whichever account in your Inbox is highlighted is the one that the outgoing mail address defaults to. So make sure your Inbox toggle is down, which should show all your accounts. So when you are sorting thru your mail and want to reply to one in "XXXX" account you will be "in" that account.
    Whew, did that make sense?
    John

  • In itunes 10.6, when I click to burn a cd, it takes 10 minutes for the  "Burn Settings" screen that allows me to choose which cd burner to use to be displayed. I have tried setting the UpperFilters to "GEARAspiWDM" and LowerFilters to null. Any suggestion

    In itunes 10.6, when I click to burn a cd, it takes 10 minutes for the  "Burn Settings" screen that allows me to choose which cd burner to use to be displayed. I have tried setting the UpperFilters to "GEARAspiWDM" and LowerFilters to null. Any suggestions?

    Many thanks for the diagnostics.
    Failed while scanning for CD / DVD drives, error 2380.
    Error while opening iTunes CD driver.  This could be caused by a corrupted iTunes file or a conflict with other older CD burning applications, either currently installed or previously installed and uninstalled incorrectly.
    With that one, I'd start with solution 3 from the following document:
    iTunes for Windows: Optical drive is no longer recognized, or "Disc burner or software not found" alert after install

  • Mail in Mountain Lion does not display all HTML messages

    For some reason Mail app stopped siplaying most HTML messages. I haven't changed any settings but can't seem to figure out how to make mwaagwa qirg HTML display the way they used to. Thanks in advance!

    how do you log into hotmail at work? via webmail interface? hotmail provides POP email access only when using an email clienet and you probably have Mail set to remove messages from server after downloading them. go to Mail preferences->account->advanced and check those settings. you can change them to leave messages on server or to remove them from server only when they are moved from the inbox.

Maybe you are looking for