Method 'DBEngine' of object '_Application' failed

I am trying to run the latest version of OMWB against an Access 2000 database and am not able to export the information to XML. The subject error message is then followed with another message, 'object variable or With block variable not set'. Any comments or suggestions would be greatly appreciated.
Harvey

Hi,
I believe you are getting the "Method 'DBEngine' of object '_Application' failed" error because there is a problem with your DAO installation. If you manually register the dao360.dll, you should no longer experience this issue when you attempt to use the Exporter tool.
Execute :
Regsvr32 "C:\Program Files\Common Files\Microsoft Shared\DAO\dao360.dll"
Please refer to the following article for detailed steps:
http://support.microsoft.com/?scid=kb;en-us;887033&spid=2509&sid=global
If this does not resolve your issue, please let me know.
I hope this helps.
Regards,
Hilary

Similar Messages

Error #3343 - XMLExporter Method 'Run' of object '_Application' failed ...

Hi all,
I am new to the Migration Workbench tool - so excuse me if I ask some silly questions.
I have a MSAccess 2002 application with some tables and forms (plus macros) - When run the omwb2002.mde program (version 10.1.0.4.0) - select my mdb file, set the directories and press the "Export Database Schema" button I get an "Error #3343 - XMLExporter Method 'Run' of object '_Application' failed ..." error !
No Files are created !
Any help would be greatly appreciated

Hi,
You may be receiving the MS Access Error #3343 - Unrecognized database format for one of the following reasons:
1. You are attempting to open an MS Access database in an older version of MS Access e.g opening a 2002 MDB file on a machine where MS Access 97 is installed.
Ensure that the Exporter Tool version and the MS Access MDB file version all match the version of MS Access installed on your machine e.g. If attempting to export a 2002 MDB file, you should use the omwb2002.mde and have MS Access 2002 installed on the machine.
2. You have a linked table to an Excel spreadsheet.
The Exporter tool supports the extraction of linked tables where the link is to another MS Access database. Links to Excel spreadsheets should be removed prior to export. Make a copy of your MDB file, and remove any such links from the new copy. Then carry out the export.
3. Your database is corrupt & needs to be repaired.
From the MS Access menu bar, go to Tools | Database Utilities | Compact and Repair Database... to repair the MDB file.
I hope this helps. If none of the above steps resolve your issue, please let me know.
Regards,
Hilary

Run-time error '1004' -- Method 'Container' of object '_Workbook' failed

Dear All,
One of our users is getting the following Microsoft Visual Basic error while running the report S_ALR_87013614.
Run-time error '1004'
Method 'Container' of object '_Workbook' failed.
I have searched the forum posts for help. But I only found some details related to Run-time error 1004 related to some excel file security but not related to "Method 'Container' of object '_Workbook' failed".
Could anyone please tell me how this error can be eliminated for the user?
Regards,
Lakshmi.

Dear Arpan,
We too observed a few PIDs along with the one that you have mentioned but they make no difference. Some users who has the PID G_RW_DOCUMENT_TYPE set with some value are getting the report.
Upon further searching we are assuming that it could be an issue with the Microsoft applications or macro settings of the user. But not sure about it.
Regards,
Lakshmi Venigala.

Runtime Error '1004':, Method 'Intersect' of object '_Global' failed

Hello
I am getting a runtime error 1004, can someone tell me why? I am getting the runtime error on the first Application.Intercept statement.
Thank you for your help!
smsemail
Private Sub Worksheet_Change(ByVal Target As Range)
Application.ScreenUpdating = False
Application.DisplayAlerts = False
If Not Application.Intersect(Target, Me.Range("A:A")) Is Nothing Then
lastRow = ActiveSheet.Range("A" & Rows.Count).End(xlUp).Row
If lastRow < 17 Then
Exit Sub
End If
If lastRow > 67 Then
lastRow = 67
End If
Else
Exit Sub
End If
If Not Application.Intersect(Target, Me.Range("A17:A" & lastRow)) Is Nothing Then
Application.EnableEvents = False
If Application.WorksheetFunction.CountA(Worksheets("RIPS").Range("A17:A67")) = 0 Then
Exit Sub
End If
If Application.WorksheetFunction.CountA(Worksheets("RIPS").Range("B17:B67")) = 0 And _
Application.WorksheetFunction.CountA(Worksheets("RIPS").Range("C17:C67")) = 0 And _
Application.WorksheetFunction.CountA(Worksheets("RIPS").Range("D17:D67")) = 0 Then
Exit Sub
End If
If CmdExecute = True Then
Exit Sub
End If
If CmdClear = True Then
Exit Sub
End If
Worksheets("RIPSSummary").Activate
lastRow = ActiveSheet.Range("A" & Rows.Count).End(xlUp).Row
Set SourceRange = Application.Intersect(Range("A2:A" & lastRow), ActiveSheet.UsedRange)
MsgBox "Source Range: " & SourceRange
Worksheets("RIPS").Activate
lastRow = ActiveSheet.Range("A" & Rows.Count).End(xlUp).Row
Set TargetRange = Application.Intersect(Range("A17:A" & lastRow), ActiveSheet.UsedRange)
MsgBox "Target Range: " & TargetRange
Exit Sub
wsDeleted = False
For Each acell In SourceRange.Cells
RecordFound = True
If Not IsEmpty(acell.Value) Then
Set C = TargetRange.Find(acell.Value, LookIn:=x1values)
If C Is Nothing Then
RecordFound = False
End If
If RecordFound = False Then
wsDeleted = True
For Each Worksheet In Worksheets
If Worksheet.Name = acell.Value Then
Worksheet.Delete
End If
Next Worksheet
End If
End If
Next acell
If vbKeyDelete Or _
vbKeyClear Then
r = lastRow
Do Until r < 17
If Worksheets("RIPS").Range("A" & r).Value = "" Then
Rows(r).Delete
End If
r = r - 1
Loop
End If
Application.EnableEvents = True
End If
Application.ScreenUpdating = True
Application.DisplayAlerts = True
End Sub

It should work but maybe there's something about your workbook we can't see.
In passing generally best not to disable screenupdating, alerts or events unless need to do so. More importantly though you should ensure they always get reset. As written you have several Exit Sub's before any code that resets them. Also in case of an error
consider resetting them in an error handler.

Access Migration Failure: Error 3021 Method 'Run' of object

I am doing a proof-of-concept to migrate and convert some Access applications.
I downloaded the migration tool and then tried the Northwind mdb to verify it worked and all went as planned with a SQL output file.
When I run it against a working copy of the production mdb it gives this error and produces no output.
Error #3021 – XMLExporter – Method ‘Run’ of object ‘_Application failed *access.mdb” Database Schema Export did not complete successfully.
I conjecture it is trying to 'Run' the object and not finding it. How can I work around this or fix the error. I am not an Access expert so any ideas are appreciated.
slavanaway
Message was edited by:
slavanaway

Hi Ian,
Thanks for the detailed posting, it's very helpful.
If you are receiving error #2501, it would appear that there's an issue in opening a report in your MS Access database.
When you open the MS Access database to be exported, can you successfully view your report(s) or do you receive the #2501 error even then? If you receive this error when accessing the reports, I believe it's relating to the printer setup on the machine. The default printer on the machine you are using may be "imcompatible" with the format of your MS Access report. Try to select another printer on your network as the default, or even try re-installing the default printer. If this does not resolve your issue, please let me know.
I hope this helps.
Regards,
Hilary

[CS3] Method Generate for the object Index fails

Hello,
I will create an index in my VB script with InDesign CS3:
Set objIndex = docindex.Generate(indIndexDoc.Pages.Item(1),p)
The index is longer than one page.
I think this is the reason, when I get this error:
Runtime error -2147417851 (80010105)
Method "Generate" for the object "Index" fails
Thank you in advance!
Harald

I got this hint from Martin Fischer:
The problem is a special character in the topics.
Harald

Proxy object creation failed in jax-ws

Hi
I try to implement a dynamic client via proxy (this time not dispatch) I made all client artifacts dynamically in code via WSIMPORT and add result classes folder to my CLASSPATH but when it try to create Proxy object it failed, and argued about one of my service method couldn't be found.
here is my code:
 public void callSynchWSIMPORT(String wsdlPlace,String tNS,String serviceNam) throws Exception{
 URL wsdlLocation = new URL(wsdlPlace);
 QName serviceName = new QName(tNS,serviceNam); //http://localhost:8080/TestENDP/TestENDPService?WSDL;
 QName portName = new QName(tNS);
 System.out.println("1- This parameters are specified:"+
 " serviceName: "+serviceName+
 " portName: "+portName );
 runOScmd(); // Call WSIMPORT on OS level
 System.out.println("2-Client artifacts created");
 Service myService = Service.create(wsdlLocation,serviceName); // Creating services from qualified name
 Iterator<QName> itPort = myService.getPorts(); // Iterate trough the ports
 while (itPort.hasNext()) { // For each port in WSDL
 QName port = itPort.next();
 Object proxy = myService.getPort(port,service4Test.TestENDP.class);
 javax.xml.ws.BindingProvider bp =(javax.xml.ws.BindingProvider)proxy;
 Map<String,Object> context= bp.getRequestContext();
 context.put("javax.xml.ws.session.maintain", Boolean.TRUE);
 System.out.println("From Web Service add method called with 10,10:"+ proxy.getClass());
 }my web service is simple (service4Test.TestENDP) .It add and minus two number.
I get this error:
Exception in thread "main" class: service4Test.jaxws.Add could not be found
 at com.sun.xml.ws.modeler.RuntimeModeler.getClass(RuntimeModeler.java:269)
 at com.sun.xml.ws.modeler.RuntimeModeler.processDocWrappedMethod(RuntimeModeler.java:558)
 at com.sun.xml.ws.modeler.RuntimeModeler.processMethod(RuntimeModeler.java:505)
 at com.sun.xml.ws.modeler.RuntimeModeler.processClass(RuntimeModeler.java:353)
 at com.sun.xml.ws.modeler.RuntimeModeler.buildRuntimeModel(RuntimeModeler.java:249)
 at com.sun.xml.ws.client.ServiceContextBuilder.processAnnotations(ServiceContextBuilder.java:117)
 at com.sun.xml.ws.client.ServiceContextBuilder.completeServiceContext(ServiceContextBuilder.java:85)
 at com.sun.xml.ws.client.WSServiceDelegate.processServiceContext(WSServiceDelegate.java:114)
 at com.sun.xml.ws.client.WSServiceDelegate.createEndpointIFBaseProxy(WSServiceDelegate.java:266)
 at com.sun.xml.ws.client.WSServiceDelegate.getPort(WSServiceDelegate.java:152)
 at javax.xml.ws.Service.getPort(Service.java:94)
 at client.ExecuteViaProxy.callSynchWSIMPORT(ExecuteViaProxy.java:39)
client.ExecuteViaProxy.callSynchWSIMPORT(ExecuteViaProxy.java:39) is this line :
Object proxy = myService.getPort(port,service4Test.TestENDP.class);

Hi RezaRavasizadeh,
It seems I got the same problem when my web service (calling another one) is called by a BPEL process... It works perfectly when I call it from a web application but when it is invoked by the BPEL process, it looks like it loses the context and can't retreive the class by the RuntimeModeler.
Did you find any solution ?
Best regards
@++

Range of Object Worksheet Failed error when creating variable report

I have BO Planning version 11.6 and am running it in conjunction with Excel 2007. Every time I try to use the Report Wizard I can create a report the first time with no problems. However, when I exit out of that report and then try to create a new report using the Report Wizard I receive the following error "The following error has occurred: Error No. 1004, Method 'Range' of obejct'_Worksheet' failed". Then a report pops up with no data in it. The error keeps occuring when I try to create new reports until I exit out of Business Objects and open it up again. Then I can create 1 report with no problems.

Please post this query to the Other Business Objects Products forum:
SAP BusinessObjects BI Legacy Products
That forum is monitored by qualified technicians and you will get a faster response there.
Thank you for your understanding,
Ludek

Generically calling a method on an object

Hello,
I am trying to write a small utility method to generically call a method on an object.
This is what I have.
    public static void doCall(Object o, String methodName, Object ... args){
        Class[] types = new Class[args.length];
        int i = 0;
        for(Object arg : args){
            types[i] = arg.getClass();
        try {
            Method m = o.getClass().getMethod(methodName, types);
            m.invoke(o, args);
        } catch (Exception e) {
            e.printStackTrace();
            throw new RuntimeException("Error dynamically calling method " + methodName + " on " + o.toString());
    }It doesn't work because it can't find the method. If I hard code the parameter types as "new Object[] {Double.TYPE}" it works fine (on methods that take a double).
So, my question is, how can I generically set up the parameter types based on the types of the arguments?
Thanks,
~Eric

The problem is not on calling agr.getClass(), your primitive double is already autoboxed to a Double object. It is the doCall(...) method who expects an object, not a primitive. So when giving it a primitive value, java autoboxes it to the corresponding object type.
This means your attempt will only work if the methods to call do not have any primitives as parameters.
Test this code:
public class GenericMethodCaller {
     public static void doCall(Object o, String methodName, Object ... args){
        Class[] types = new Class[args.length];
        int i = 0;
        for(Object arg : args){
            types[i++] = arg.getClass();
        try {
            Method m = o.getClass().getMethod(methodName, types);
            m.invoke(o, args);
        } catch (Exception e) {
            e.printStackTrace();
            throw new RuntimeException("Error dynamically calling method " + methodName + " on " + o.toString());
     public static void main(String[] args) {
          Callable callee = new Callable();
          callee.callabelMethod(10d);
          GenericMethodCaller.doCall( callee, "callabelMethod", 10d ); // 10d gets autoboxed to a Double object.
class Callable {
     public void callabelMethod(Double o) {
          System.out.println("callabelMethod(Double o) called");
     public void callabelMethod(double o) {
          System.out.println("callabelMethod(double o) called");
}The output will be:
callabelMethod(double o) called
callabelMethod(Double o) called
- Roy

How can I use methods of an object with private instantiation in my ABAP?

Hello all,
What is the work-around on using methods of an object marked as private instantiation? I tried to use concepts of INHERITANCE or FRIENDS of an object (BCONTACT in my case - a SAP standard object) but it did not work, or at least, I do not know how to properly code the statements in my ABAP program.
Any code samples, other ideas?
Your help is greatly appreciated.

I am closing this question as there has been no answer.
Message was edited by:
Goharjou ardavan

How to use the index method for pathpoints object in illustrator through javascripts

hii...
am using Illustrator CS2 using javascripts...
how to use the index method for pathpoints object in illustrator through javascripts..

Hi, what are you trying to do with path points?
CarlosCanto

When a Method Returns an Object, does it return a copy or a pointer?

When you have a method that returns an Object, is the Object returning a copy of the Object returned inside
of the Method or is it an Actual pointer to the Object inside of the method's coresponding Object?
so say you have an object ...
Class Something {
JLabel myLabel = new JLable("myLabel");
public JLabel getLabel() {
return myLabel;;
Something something = new Something();
JLable theLabel = something.getLabel()
theLable.setString("theLable");
so when I setString on the Object theLabel , am I going to change the value of myLabel inside of the Object something?

Yes, it returns a pointer.

Override method on an object construted by somebody

     customMenuComponent.addCustomLink(new CustomLinkComponenet("strlink","Storage Inbox",Index.class) {
               protected BookmarkablePageLink getBookmarkablePageLink() {
                    BookmarkablePageLink bookmarkablePageLink=   new BookmarkablePageLink("link",clazz){
                         protected void onBeforeRender() {
                              super.onBeforeRender();
                    return bookmarkablePageLink;
          customMenuComponent.addCustomLink(new CustomLinkComponenet("strlink","Storage Inbox",Index.class) {
               protected BookmarkablePageLink getBookmarkablePageLink() {
                    BookmarkablePageLink bookmarkablePageLink=   super.getBookmarkablePageLink(){
                         protected void onBeforeRender() {
                              super.onBeforeRender();
                    return bookmarkablePageLink;
          });the second block of code does not compile please explain me why and what is the workaround ? i can override a method on a object when I initialize with new but cannot override if I get the object from super or somebody constructs why ?

miro_connect wrote:
in my case is there way to copy object returned from super to object created in sub and override methods ?Perhaps. You need to know about the implementation of the original object.

Calling a method in BPM Object from jsp page

hi all,
I try to call a method from BPM Object using <f:invokeUrl >
I change server side method properties to yes.
and then how can i get request and response object inside the BPM method.
Thanks.

Thanks for ur response,
But i mention about BPM method inside BPM Object.
i found this inside the documentation.
methodName(Fuego.Net.HttpRequest request, Fuego.Net.HttpResponse response)
i need to match above BPM method and <f:invokeUrl > tag. am i right?
But i don't know how to create method with argument "Fuego.Net.HttpRequest request, Fuego.Net.HttpResponse response" inside BPM Object.
I can't find any place to define method argument inside Oracle BPM studio.
I don't know how to parse argument like "Fuego.Net.HttpRequest request, Fuego.Net.HttpResponse response"
With Regards,
Wai Phyo
Edited by: user8729650 on Sep 9, 2009 7:03 PM
Edited by: user8729650 on Sep 9, 2009 9:20 PM

Calling a method in BPM Object from jsf page

Hi All,
How do I call a method in BPM object from JSF page? Is it possible to invoke it in a manner similar to invoking a method from managed bean in JSF application?
Please help.
Thanks and Regards,
Veronica

You can use f:invoke (or f:invokea to with parameters)
For ajax calls, you can use f:invokeUrl to get the URL to a particular method within your BPM object, although make sure the Server-Side Method property is set to Yes.
http://download.oracle.com/docs/cd/E13154_01/bpm/docs65/taglib/index.html

Method 'DBEngine' of object '_Application' failed

Similar Messages

Maybe you are looking for