Min max planning report errors out

Min max planning is defined at Organization level with the source type as
supplier.
Min max report errors out for restock option "yes".
Following is the error message in the log file
MSG-00069: Calling INV_MMX_WRAPPER_PVT.exec_min_max from Before Report Trigger
MSG-00070: INV_MMX_WRAPPER_PVT.exec_min_max returned an error:
REP-1825: Before Report trigger returned FALSE.
Have checked all the possible causes
1)work day calender
2)Default delivery location
3)profile option.
Also applied a patch for this error
Patch number 4613194
Still the issue persists

Hi,
Please review the following notes:
Note: 453956.1 - INVISMMX.RDF - Mix-Max Planning Report Completes Successfully But Receive MSG-00069 in Request Log
https://metalink2.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=453956.1
Note: 785813.1 - MSG-00069, MSG-00070 Errors Occurred While Running Min-Max Planning Report
https://metalink2.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=785813.1
Note: 275521.1 - Min Max Rep (INVISMMX) Returns Errors MSG-00069, MSG-00070, REP-1825
https://metalink2.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=275521.1
Note: 280605.1 - 11i INVISMMX- Error Before Report Trigger Returned False Rep-1825
https://metalink2.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=280605.1
Regards,
Hussein

Similar Messages

Min Max planning report - ability to run for specific vendor

Hi,
We have a unique requirement wherein business users would like to run min-max planning report for a specific vendor. Vendor here is item sourcing vendor. We are on R12 12.0.4. This version of applications doesnot support sourcing vendor as the min-max report parameter.
Other than setting up item category for ASL vendor, i can't think of any other easy way to accomplish above requirement. Please suggest workaround for above requirement.
Thank you

If you have to do this, here is a complex workaround.
Create a request set that contains a custom program as first stage and the regular min-max as the second stage.
The custom program accepts vendor name as a parameter and disables min-max planning flag for all items EXCEPT those that are sourced from that vendor.
Then the 2nd stage runs and creates requisition.
You may add a 3rd stage that resets the min-max planning flag.
Make this program incompatible with itself so 2 users won't run it at the same time.
Hope this helps,
Sandeep Gandhi

Supply quantity isn't being considered in min-max planning report Oracle

Oracle 12 Issue:
system isn't considering the open PR/PO while suggesting re-order quantity in new PR of same item code. I am giving all parameters with "Yes" except include non-netable parameter with "NO". I take system current date as default date for "Demand & Supply cutoff date".
Please help me to resove/identify this issue.
Zeeshan Khan
[email protected]

Hi,
Issue #1:
Need by Date on the purchase order/Requisition line is after the supply cut-off date entered by the user (or defaulted) when launching the Min-max planning report.
Fix: Please re-launch the Min-max planning report with higher supply cut-off date.
Issue #2:
Destination type stamped on the purchase order line / distribution is Expense.
Since it will not affect the on hand quantity for the item, the Min-max planning report is ignoring this purchase order.
Fix:Please retry with a new purchase order with destination type set as Inventory.
Thanks
-Arif.

Min Max Planning Report

Dear all,
In the exported report that Store use as a reference in raising PR (Min Max Planning - under Planning module) there is a column called “Supply Quantity” .. just want to know where from the data on this column is coming from?!!
Thanks ..

Hi,
Supply quantity comes from various sources of supply (e.g. Open Purchase Orders).
Thanks,
PS.

Min Max Planning Error-Unable to generate requisition

when we run min max planning in test instance for certain items we get the the below error:
“Unable to generate requisition”
Checked the source type for the items which had this error.There is no Source type set for those items even then we get this error.Any help.
Thanks

Check
Min/Max Planning Message: "Unable to Generate Requisition" [ID 113224.1]
Getting Message "Unable to generate requisition" in the Output of the Min-Max Planning Report (INVISMMX) [ID 1265297.1]
Hope this helps,
Sandeep Gandhi

Min-Max Planning Generating Purchase Requisitions

We have been using min-max planning for a while and scheduling the min-max planning report (planning level: organization) to run every evening to generate a purchase requisition. Of late we have some items that are showing a reorder quantity but not generating a purchase requisition. We have verified the set up of those items against items that are generating a requisition and can't see a difference. What are the possible causes of items not generating a requisition when using min-max planning?
Thank you!

Make sure Item Settup has the "List price" Given.
Source is set to " Supplier"
When you are running the Min-Max Report, it should have the Parameter "ReStock" to "Yes".
Since the records has to come from the Inventory to the Purchasing Module there is possibility that Records might be there in Interface tables. Run the "requisition Import" program and see if it address your issue.
Thanks and regards,
Phani

Min Max Planning not reading Flow Schedules as Demand

We use min max planning to order all recurring purchases and flow schedules for production planning.
Min max planning report does NOT see flow schedules as a source of demand. Is this correct or are we missing a setup somewhere?
If min max planning cannot read flow schedules, is there a standard report to identify component shortages where items are between min max level but not enough on hand to fulfill the open flow schedule?

Check the user and employee tht you have used to launch the conc prog...

ESYU: Min-Max planning을 실행하면 자동으로 ReqImport program이 launch 되지 않는 원인

Purpose
Oracle Inventory Management - Version: 10.7 to 11.5.10
REPORT:INVISMMX - Min-max planning report
EXECUTABLE:POCIRM - Requisition Import
Buy items에 대해 Min-Max(with Restock=Y)을 실행하면, 이 program은 ReqImport를
자동으로 launch 시키지 못하고 단지 po_requisitions_interface_all table에 data를
insert 한다.
하지만 사용자는 Min-Max가 실행되면 이후 자동으로 ReqImport가 실행되길 원하고
있다. 이를 위한 workaround 방법을 소개한다.
Cause
ReqImport가 Min-Max 이후 자동으로 실행되는건지, Min-Max에 의해 자동으로 실행되는지
구분할 필요가 있다.
ReqImport는 Min-Max에 의해 실행되지 않는다.
Min-Max의 standard design은 단지 po_requisitions_interface_all table에 data를 넣어
주기만 할 뿐이지 ReqImport request를 자동으로 실행시키지는 않는다.
ReqImport는 Min-Max 진행 후 실행될 수 있다.
왜냐하면 ReqImport는 주기적으로 실행되게 scheudling 되어 있거나, ADS_PO_REQ_IMPORT_TRG1
와 같은 trigger에 의해 실행된다.
일부 vision demo instances에서 위 trigger를 볼 수 있는데 이 trigger에 의해 po_requisitions_interface_all
table에 data가 insert가 되면 ReqImport가 launch 된다.
Note: 이 Trigger는 standard product이 아니므로 귀사의 instance에서는 찾을 수 없을 것이다.
Solution
1. Short-to-medium term solution at your instance:
1-1) ReqImport가 주기적으로 실행될 수 있게 Schedule 해 놓는다.
-- or --
1-2) Min-Max report(Restock=Yes) 실행 후 manual 하게 ReqImport를 실행한다.
-- or --
1-3) Min-Max와 ReqImport programs을 포함하는 Report Set을 define 하고, Min-Max 대신
이 Report set 만을 실행한다.
-- or --
1-4) po_requistions_interface_all table에 triggers(similar to ADS_PO_REQ_IMPORT_TRG1)를
생성한다.
2. Medium-to-long term solution from Oracle
ER/Doc bug을 등록하고 metalink를 통해 진행과정을 check 한다.
2-1) Enhancement Request via ER/Bug 4310485 to have Min-Max Report to fire ReqImport automatically.
2-2) Documentation Bug 4310487 to have the INV User Guide corrected that Min-Max does NOT create Requisitions,
but ONLY populates the po_requisitions_interface_all table.
Reference
Note 305099.1

Min max planning to get supply quantity

hi
in INV super user there is the standard report for MIN MAX planning report
i see supply_qty but cant find the calculation on how supply_qty is done
kindly guide me

hi
i cud only see ref to supply cut off date ,can u guide me on how the report displays supply qty ie from where is this calculation performed ,is there
a query or a package for the same
in the report i cud see all these values come from INV_MIN_MAX_TEMP ,this is a temporary table,how do values get in here?
kindly guide me
thanking in advance
Edited by: makdutakdu on Feb 2, 2011 7:25 AM

Need some help with the DOF Min Max Planning Logic

Hello All,
Morning...could someone please help us with this issue which we are facing in our production system.
We are running the Dof Min Max Planning Report at the Subinventory level and for a given item.
This item setup in this sub inventory has the Min qty : 2 , Max qty :2.
--We don't see any open orders/ requisitions in the system for this item.
--We also don't see any expected receipts for this item coming to this org/subinventory.. All the shipment lines are in Fully Received status.
--We dont see any stuck supply records in mtl_supply table as well..and also checked for the Inv Transactions interface tables as well ( MTI , mtl_material_transactions_temp)..we dont find any stuck transactions for this item, subinventory & org.
Now when we are running the Dof Min Max report is is showing the Supply Quantity as 2 and Available Quantity as 2.
Hence the Reorder quantity is coming as Zero..basically it is not re stocking the item again for this subinventory level.
Could someone please assist as to what could be reason why this Supply Quantity is showing some value when we dont see any stuck supply / expected open receipts..
What else we need to check here to get this issue resolved and to know the source of the Supply Quantity.
thanks

In the report run, what parameters are considered as Supply?, Also did you check the supply data considering your cutoff dates offset?, the item what you are talking about is a buy item? check if there were requisitions already created.

Min Mx planning report gives an error when run with RE-Stock yes.

Hi All,
We are going to implement Min Max planning for the first time.However when we test it at org level with Re-Stock parameter YES it gave an error.
what are the additional setups need to be done for it?
It works fine when running with re stock no.and gives the out put of the report accurately.
Thanks.
MPH

Hi Garry,
These are the parameters and error codes are also given.
P_ORG_ID='328'
P_LEVEL='1'
P_SELECTION='3'
P_CAT_SET_ID='1'
P_CATG_STRUCT_ID='101'
P_SORT='1'
P_D_CUTOFF='2009/07/03 00:00:00'
P_D_CUTOFF_REL='0'
P_S_CUTOFF='2009/07/03 00:00:00'
P_S_CUTOFF_REL='0'
P_USER_ID='5411'
P_RESTOCK='1'
P_DD_LOC_ID='32488'
P_NET_UNRSV='1'
P_NET_RSV='1'
P_NET_WIP='1'
P_INCLUDE_PO='1'
P_INCLUDE_MO='1'
P_INCLUDE_WIP='1'
P_INCLUDE_IF='1'
P_INCLUDE_NONNET='2'
P_LOT_CTL='3'
P_DISPLAY_MODE='1'
P_SHOW_DESC='2'
P_PUR_REVISION='2'
*MSG-00069: Calling INV_MMX_WRAPPER_PVT.exec_min_max from Before Report Trigger
MSG-00070: INV_MMX_WRAPPER_PVT.exec_min_max returned an error:
REP-1825: Before Report trigger returned FALSE.*

Report errors out.

All,
One of my reports has a parameter (say entity_id) where the user can select one value (entity_id=1) or multiple values (entity_id=1, 2, 3, 4) or All (entity_id =*) values for that parameter (entity_id). The report handles all the 3 cases correctly but in case of 'All' the report errors out and I'm getting an error saying that
the page cannot be displayed in IE This might be because of the huge data retrieved from the DB.
When I run the report for single parameter value the report is taking about 4 to 5 secs. For two values in that parameter it’s taking about 8 to 9 secs and for 3 values in that parameter it’s taking 10-11 secs. So, if say, on an average it’s taking about 5 secs to run the report for one value. If the user selects ‘All’ for that parameter it might take upto 45 mins to run the report.
Is there a timeout thing in BI Pub when the report is running?
Any help is greatly appreciated !
BI Pub Standalone Version 10.1.3.4
Thanks

Does the report error out or does the browser give up? I suspect the browser times out waiting. How much data is being retrieved with the All option? Typically if the report has not rendered within 10 secs then it ought to be scheduled rather than waiting for it i the browser.
there is currently no method to allow the user to submit such a report and after 10 secs offer them the ability to schedule. All they can do is cancel the request and then schedule.
Tim

Min-Max Planning simple questions

Hi
I'm trying to use Min-Max Planning. Inventory User's Guide says that Min-Max Plannig uses a demand to evaluate order quantity, but don't tell if such demand by month, year or whatever. Looking the figures seems to be annual demand (but doesn't match my annual sales). What kind of demand is used?
If demand is calculated on a yearly basis, resulting order qty should be to satisfy sales of a whole year (I guess).
Is there a way to change that? Does really matter?
Please some words of advise
Oscar

OPR wrote:
Hi
I'm trying to use Min-Max Planning. Inventory User's Guide says that Min-Max Plannig uses a demand to evaluate order quantity, but don't tell if such demand by month, year or whatever. Looking the figures seems to be annual demand (but doesn't match my annual sales). What kind of demand is used?Hi Oscar,
depending upon at which level (organization or subinventory) you are running Min-Max planning and the options selected for net demand will determine what will be included under open demand. It is the total open demand on or before the demand cutoff date, based on net demand selection for reserved & unreserved orders and WIP. It is NOT by month, year or any period.
Min-Max at Organization level:
If you choose Yes for Net Unreserved Orders, Net Reserved Orders and Net WIP Demand then Open Demand is the sum of unreserved sales orders, inventory reservations (including reserved sales orders), account issue move orders, and WIP component demand scheduled for issue on or before the demand cutoff date.
Min-Max at Subinventory level:
If you choose Yes for Net Unreserved Orders and Net Reserved Orders (no WIP demand option here) then Open Demand is the sum of inventory reservations (including reserved sales orders), account issue move orders, and subinventory transfer move orders scheduled for issue from this subinventory on or before the demand cutoff
date. At subinventory level inventory reservations referencing a different subinventory, or with no subinventory specified, are not included.
e.g. if the demand cutoff date is 30-Jun-2009 and net options have been selected as Yes then then it will look for demand upto 30-Jun-2009 (Note: some apps reports have time part issue while comparing dates, so in those cases 30-Jun-2009 is taken as 30-Jun-2009 00:00:00 i.e 29-Jun-2009 midnight!).
Also if you specify a past date for demand cutoff date it will consider open demands available, if any, upto that past date (but you plan for the future, not past).

BO 4.1 report errors out

Please help me out with below issue
We have a .net web application accessing BO 4.1 CMS server with SP2 through BO SDK for .net to display existing reports from BO Server and we have below environment
QA Setup =>   .NET app server 1 + BO Server 1
PROD Setup => .NET app server 2 + BO Server 1
in above combination BO reports works as expected from PROD setup but getting below in consistency while accessing the reports from QA box
1. Getting "Problem with server's security certificate" from QA instance of the app but the same BO server works fine from PROD. (verified the server certificate and its valid for another 4 years)
2. after showing java applet window for a while report errors out and just display JRE runtime error without giving much debugg info
3. browser profiler shows data getting downloaded on the client browser but still errors out
we are generating the token as shown below and direct report URL ( with .jsp to call apache server) is passed to load the report to an iFrame.
        if (!ValidateToken(currentToken))
            SessionMgr ses = new SessionMgr();
            EnterpriseSession es = ses.Logon(AppSettings.BusinessObjectsUser, decrypter.DecryptString(AppSettings.BusinessObjectsPass), AppSettings.BusinessObjectsUrl, "secWinAD");
            LogonTokenMgr myToken = es.LogonTokenMgr;
             return myToken.CreateLogonTokenEx("", 1440, -1);
Could you please suggest how to make this work.
Regards
ANoop

Hi All,
Attaching the snapshot of webi report error returned on the application and trace returned on IE 9 developer tool
1. webi report error
2. Trace returned on IE 9 developer tool
as the same BO server render the webi report on other asp.net application with same configuration, is there any way to find either from BO server or the location machine why the report error out... ?

Min Max Planning

Hi,
Is it possible in any way for the system to source it internally for another Inventory/Subinventory if the product is available there or source it from a suplplier if it not available internally when a scheduled Min Max Planning runs.
Regards
Vinay

Not directly.
But you can setup two min-max runs.
One that runs between your SHOPFLOOR subinventory and WAREHOUSE subinventory (i.e. internal source)
And then another one that runs on WAREHOUSE subinventory with source = supplier.
Hope this helps,
Sandeep Gandhi

Min max planning report errors out

Similar Messages

Maybe you are looking for