Minimum order value

Hi All,
We are trying to use the standard condition type AMIW and AMIZ to achieve the minimum sales order processing, but for some reason this does not seem to work.
Per OSS Note 999587,18173 we have the necessary condition type maintained as well as they have been included in the pricing procedure as mentioned in the note.
The issue is although the minimum value is not reached, the corresponding surcharge condition has a value of 0. subtotal has been assigned value 'D' for AMIW however WORKD has a value of 0.
Settings in pricing procedure
Condition type AMIW
Field Value
Statistical X
Subtotal D
Account key Blank
Condition type AMIZ
Field Value
Alt.calc.type 13
Account key ERS
We have also setup the condition record, with a fixed value of 200USD for AMIW. I was hoping by using this function the system would determine a minimum order surcharge value if the net value of the order was below 200USD.
Has anyone been able to use  the minimum sales order value function? We are currently on ECC6.0 and our patch level for SAP_AP is at 0020 release 700.
Any help or insight is much appreciated.
Thanks
LD

Hi,
http://help.sap.com/saphelp_46c/helpdata/en/93/7434de546011d1a7020000e829fd11/frameset.htm
Also assign Requirement as 2 and try
Kapil

Similar Messages

  • Minimum order value for Purchase orders

    Hello,
    This is my requirement: -
    A condition type needs to be created for Minimum Oder Value for PO. If the PO value is say, 450 and the condition record in 500, the PO value must be adjusted to 500. If PO value is 550, then it remains 550.
       1. Condition records must be maintained.
       2. Must be calculated on whole PO (all items) and then redistributed among items in a suitable ratio.
    This is what I have already tried:-
      1. Vendor master - No use maintain minimum order value as PO price must be adjusted through condition types.
      2. Tried replicating PMIN condition type and it works but only at item level - this calculation must take place at header level. Also it works only for calculation type "Quantity".
    Please suggest how this can be implemented, hopefully through configuration only.

    Hi,
    Please use user exit MM06E005 and code accordingly. Take help of ABAPer.
    thanks and regards
    Murugesan

  • Minimum Order Value for an internet sales order in the webshop

    Hi Guys,
    I have a requrement of maintaining Minimum Order Value (MOV) for an order created in B2B webshop.
    We have a condition type AMIZ which supports the same function in ECC. Will it support CRM too?
    Current implementation is CRM 5.0 and the backend is R/3 4.7.
    Thanks in advance,
    Srinivas

    Hi Srinivas,
    I believe condition type AMIZ is available in CRM by standard. So its should support. Offcourse you ll have to assign the required requirement routines / condition base values.
    Regards,
    Gaurav Gera

  • Merchandise Distribution Collective PO with SLS - Minimum Order Value

    Hi,
    My organisation is using Merchandise Distribution with SLS to generate collective PO's at our consolidation platforms before generating either STO's or PO to the supply source.
    We're utilising Cross Dock and Flow Through to support our processes but in the case of Cross Dock, we're essentially asking the supply source to pick/pack the stock for the final recipient, therefore it can be quite an expensive process for the supply source (but clearly not for us).
    Before we implemented this the supply source used to simply receive orders directly from the store and within this process we applied Minimum Order Values, as per my previous statement it can be expensive and picking a couple of small items for one store and having to put them on a pallet is not economical for them in either warehousing or transportation.
    I'm looking for some broad suggestions on how this could be achieved whilst utilising collective orders.
    Our store STO's generated by MRP (and soon enough F&R) are large STO's that are not truly supply source specific, they are consolidation platform specific and the collective orders generated off the back of them are supply source specific.
    The key issue i see is that we're asking for a select group of lines within the store STO to meet an MOV of the vendor OR that we somehow ensure that the store STO's are supply source specific and then enforce some MOV logic.
    Obviously this isn't standard but it's causing our organisation big supply issues, so any thoughts or advice would be fantastic.
    Many thanks

    Hi ,
      You can not do directly in ME59N. Check for user exit for this t code.
    Thanks,
    Venkat

  • Freight calculation on minimum order value

    Forum,
    I am wondering if it is possible for Freight to be calculated on an AR Order based on an order's minimum order value. i.e. If an order with a value of <£50 then £5 Freight is applied.
    I cannot see a standard way of doing this, can this be confirmed?
    Regards,
    Juan

    Hi Juan,
    There is no standard way for it. You can try FMS.
    Thanks,
    Gordon

  • Use of minimum order value condtion AMIZ and AMIW

    I am using the above standard SAP conditions to calculate a minimum order value. It is working fine for an order with a single order item but for multi-item orders it is only doing the calcualtion for the last item.  As per standard SAP i have AMIW defined as group condtion but this seems to being ignored.
    Do I need to also fill in the Group Condtion Routine (GRLNR) on AMIZ or AMIW in order for this to work?
    Regards
    Dave Jones

    Settings in Pricing Procedure
    You must enter these condition types in the pricing procedure you use. The following settings are required:
    Condition type AMIW
    Field Value
    Statistical X
    Subtotal D
    Account key Blank
    Condition type AMIZ
    Field Value
    Alt.calc.type 13
    Account key ERS
    Using Referenced Conditions
    The minimum order value function uses referenced condition records. Condition type AMIZ references condition type AMIW. Referencing conditions means that different condition types can share the same condition records.
    Creating Condition Records
    If you use minimum order value requirements, you must create condition records for condition type AMIW. In these condition records, you specify customers and the corresponding minimum order values. During pricing, the system automatically uses these condition records as a reference for determining the relevant minimum order value surcharges (Condition type AMIZ).
    If you want to specify minimum order values that are not customer-dependent but instead are based, for example, on a sales organization, you must create a new condition table with the appropriate key.
    Dependent functions
    Condition referencing is controlled by two fields in condition type definition. For minimum order value processing, the settings for condition type AMIZ are as follows:
    Field Value
    Ref.condition type AMIW
    Ref.application V

  • Cancelling order discounts when below Customer's Minimum Order value

    I've been reading what I can find about discount conditions etc and am slightly confused as all the examples seem to relate to item line situations. We need to have a setup where all possible discounts are cancelled if the order total value is less than a given minimum order value (or threshold) related to that particular customer - and not based upon any line item value.
    We do not use Minimum Order Value as per the SAP examples given i.e. orders not accepted below the MOV and therefore surcharges added. As mentioned we use a threshold value for most customers under which discounts do not apply.
    Because of this we cannot automatically email or fax acknowledgements, and we have a massive time consuming checking operation for orders added to ensure mistakes are not made i.e. discounts applied incorrectly before the acknowledgements are sent out.
    Can anyone advise as to where I can find the path to getting a solution to this problem.
    Thanks
    Jim Jackson
    Edited by: Jim Jackson on Feb 20, 2009 9:11 AM

    I understant AMIW is Header condtion type - statistical- and has the MOV value for the specified customer.
    Maintain AMIW as Header / Line condition type.( T Code V/06)
    Create the condition reocord for AMIW with EXCLUSIVE Indicator X.(VK11)
    Then create a requirement for all the discount condition types, if the total order value = or > AMIW value then do not check the exclusion indicator( KOMP - KZNEP), ELSE check the exclusion indicator.
    ( T Code VOFM)
    During order save - automatically repirce the order in Userexit_save_document_prepare or userexit_save_document.
    If there is a partial delivery, during Invoicing if the copy control(delivery to Invoice) has carry out new pricing B, the above setting might fail. Maintain the copy control setting to copy pricing elements unchanged and redetermine taxes OR try to determine the condition values in the invoice from the order.
    Hope this helps.
    Thanks
    Sai

  • Vendor Master:  Minimum Order Value

    I am new to supporting MM and there is a question about Minimum Order value on the Vendor Master (LFM1-MIMBW)
    It is not currently used.
    Can we simply start populating it?
    Can it be populated for only specific vendors?
    What specifically will it do for us?
    Are there draw-backs?
    Is it "safe" to test?
    Thank you all for information
    Althea

    No problem at all in using Minimum Order value in Vendor master
    It will only applicable for that vendor and only for MRP generated PR's and convertions of those PR's to PO's.
    It is populated for the only vendors in which u maintain this.
    Drawbacks  - If the requirement is of 10 pcs but minimum order value is 100 then system creates the purchase proposals for 100 which may increase ur Inventory./
    Yes it is safe as it doesnot involves any configuration and it is only a master data activity.
    Regards
    Vineet Baweja

  • Minimum order value for delivery

    Hi all,
    I have a problem concerning order value. I want to block orders for delivery that, based on the shipping point for the individual items, do not reach a minimum order value per shipping point. When the customer orders the next time and the combined value on a specific shipping point for the old and the new order(s) reaches the limit, a delivery document should be created. We also want to create a message to the customer saying that the first order wasn't delivered due to low value.
    Is this possible without extensive programming? A little coding in a copying rule or such is ok, but as we can handle this manually in the WH-system we don't want to put to much effort in it.
    best regards,
    Glenn

    Yes you can do that, You can use the mimum order value condition type in the pricing procedure . This condtion type check for the mimimum order value and if this is not met based on the routine in pricing procedure it will block. You can make adjustments in code for the routine for the condition type.Condition type is AMIW
    Reward points!!!!!!!!!!1
    Thanks,
    Kamal

  • Minimum order value in vendor master - error message in SRM

    Hello!
    I am using minimum order value in ERP for some vendors and I am wondering if is it possible to get the same error message in SRM.
    While creating a shopping cart in SRM if the minimum order value is not reached, the following document created is a purchasing requisition.
    I would like to get the error message that the minimum order value is not reached instead of the automatic creation of a purchase requisition.
    Is it possible?
    Thanks in advance!
    Best regards,
    Karin

    Hi Karin, if you need to show an error message during Shopping Cart creation you willl need to implement badi BBP_DOC_CHECK_BADI, and maybe create an RFC Function Module to check in ECC ir the minimum order value was reached or not and show the error message.
    In order to control the following document you will need to implement badi BBP_TARGET_OBJTYPE.
    Find bellow a sample BBP_TARGET_OBJTYPE - Code Approach.
    Hope This Help.
    Celeste

  • Minimum order value maintainance in B2B order

    Hello Gurus,
    We are on CRM 5.0. In b2b web shop, there is a requirement that order should not be saved if the value of the order is below a minimum value for all customers. Addition of surcharges as in AMIW / AMIZ  is not what the business wants. We are proposing to either hardcode the values in the jsp page or store the minimum values in a z table and change the code in the order .jsp file such that a check is made in the z table on save.  Is there a standard solution for this?
    Useful solutions will be rewarded with points.
    Regards,
    Srinivas

    Hi,
    Try configuring from CRM side(similar to minimum order qty and pice) instead of specific custom enhancments.
    regards,
    laxman
    Edited by: laxman on Mar 13, 2008 9:33 PM

  • Process Sales Order based on minimum order

    Hi Sap gurus,
    Can any one Help me Out regarding How the System should have capability to process Sales Order based on minimum order quantity and minimum order value and How we will map In sap
    Thanks
    Points will rewards
    Regards
    Rajesh

    Hi,
    We can set the control for Min order quantity in the Sales org1 view. Like wise we can control min order value also.
    For that we have to use two condition types AMIW & AMIZ.
    AMIW is min order value, where as AMIZ is min ord surcharge
    Let's say AMIW value is 50,000.If the order value is less than 50,000 then AMIZ comes into picture.Amiz compares the automatically determined order value and AMIW value.The difference of those two values Amiz takes as surcharge and it overwrites the automatically determined order value with this value.
    Like wise we can maintain min order value also by using this two cond types.
    In the pricing procedure
                            subtotal      req   Altcal   Altcond+bv
    AMIW                D
    AMIZ                                  2         13
    Award me points if u satisfy
    Thanks,
    Sudheer

  • Minimum Order qty in po

    Hi
    While creating purchase order for a particular material, system should take minimum order quantity.
    For example, i create po 10ea minimum order quantity 25.then system should automatically should pick 25.
    1)pls tell me where to define minimum order quantity?
    2)is it work this scenario?
    pls help me..........
    thanks

    Hi Bhaskar,
    In materail master in the MRP1 Tab under Lot Size Data  you have two options
    Minimum Lot size and maximum lot size These two options would help you in determining the lot size when Placing a PO
    setting the values in here will create a PO for minimum lot size Qty  even if you give lessthan the qty specified in that field
    In the same Material master Under Purchasing tab you have a check box Automatic PO flag this option as well 
    It Defines that purchase orders are generated automatically when purchase requsisitions are converted into purchase orders.
    At the same time in the master record for the vendor with whom the material is ordered, the field "Automatic purchase order" must be flagged in the control data for the purchasing data.
    Now PO's are generated automatically with the specified minimum order value
    How ever this scenarion would be possible only if we are running MRP and finding material requirement and generating PR & PO automatically
    I doubt it would work if you are creating PO manually
    Hope this clarifies your doubt
    Any further clarification required do put a message
    If found useful reward accordingly
    Thanks & regards
    Pavan

  • Minimum Order Surcharge Issue -Urgent-

    Hello Experts,
    We have an issue with minimum order surcharges.  Our minimum order value is $2500.00.  This is the scenario. 
    1)  We create a sales order let's say with 10 line items (totaling $3400.00, so we minimum order surcharge should not be active). 
    2)  We partially delivered and billed the items on the sales (let's say line items 1-7). 
    3)  Our customer changed their mind and did not want one of the items that has not been delivered yet, so we delete the item from the sales order.  (Order total now is $3200). 
    My issue is when we do this, the minimum order surcharge is active when it should be, because the total order value is above $2500.  We should be able to delete items off the sales order, without having to worry getting chraged a surcharge fee.  Why is it charging the minimum order surcharge when we do this?  Is there a setting in SAP that I can modify to make this work, via condition type, etc? 
    We are on SAP 4.7c
    Any help will be greatly appreciated and pts.  Thank you for your time!
    Best Regards,
    WC

    Hi,
    Your question is in in correct place, this is SRM related area.
    Thank you

  • Minimun order value

    Hello
    The standard SAP we two condition types AMIW, AMIZ
    for processing minimum value requirements,
    In standard SAP Is it possible configure the system to give warning /error message when Minimum Order value is not reached .?
    Regards,
    Sateesh

    Hi Ayub,
    I believe that PMIN can only compare price at item level. That is , it will compare PMIN against PR00 less discounts (net value).
    Sateesh : If i understand your question correctly, you want the check to be at Header level (overall order value). And that you want to know if there is any way this can be achieved without customizing (code changes)... correct ?
    I believe that any solution for this would involve condition type AMIW, with little bit of user-exit coding to get the error message.
    Kind Regards
    Sachin Bhonsle

Maybe you are looking for