Monitering web users at real time using weblogic console?

Is there a way to monitor web users at real time using weblogic console.
I want to see no. of active HTTP sessions, no. of HTTP requests at any
point of time, opening and closing of a session...etc..
thanks in advance

See recent discussion in "servlet" newsgroup.
Cameron Purdy, LiveWater
"Manjunath Kalmani" <[email protected]> wrote in message
news:[email protected]..
Is there a way to monitor web users at real time using weblogic console.
I want to see no. of active HTTP sessions, no. of HTTP requests at any
point of time, opening and closing of a session...etc..
thanks in advance

Similar Messages

What is the real time use of implicit and explicit cursors in pl/sql

what is the real time use of implicit and explicit cursors in pl/sql.............please tell me

You can check the following link ->
http://www.smart-soft.co.uk/Oracle/oracle-plsql-tutorial-part5.htm
But, i've a question ->
Are you student?
Regards.
Satyaki De.

Problem with Deployments of web service Project as EAR in weblogic console

Hi All :-)
I was facing the problem with the Deployments of web service(java class) as EAR.I created the one web project associated with EAR project. After my development i exported this project as EAR and deployed the same on the weblogic console.....But time it will work fine and sometime it Deployments status will not become active (its running status) and failed after activate the changes.
Can any body tell me the real problem with weblogic console for Deployments?
Please tell me the solution...it?s urgent for me...If you know the answer please mail me on [email protected] or reply here on forum
Thank you very much for your time.
Rgds
Ranjit

I received the same message and resolved it by adding the following jars to the classpath. All these jars came from the weblogic92 directory:
server/lib/ant/ant.jar
common/lib/apache_xbean.jar
server/lib/jsafe.jar
server/lib/weblogic.jar
server/lib/webservices.jar
server/lib/webserviceclient.jar
server/lib/webserviceclient+ssl.jar
server/lib/schema/weblogic-container-binding.jar
server/lib/xbean.jar
hth,
John

Cannot start application deployed using Weblogic console after stop

Hello all,
I have deployed an ear file using Weblogic console. If the app. is running, I can press stop and get the 404 error...after that I press start, and get a 503 error. Right after the app is deployed, and started, it always comes up fine. But when the application is running, I must click stop, start, stop, start to get the app to start.
To start the app. I select, start and then "servicing all requests". To stop the app, I select stop and then "Force stop now". I have implemented a subclass of ServletContextListener to handle the start and stop. These methods do get called.
The 503 did not cause any errors to be found in the weblogic.log, stdout.log or access.log.
Does anyone have an idea how to start the app after it is stopped the first time?
Thanks in advance.
-PD
Edited by pauladecker at 10/01/2007 1:47 PM

Hi,
As you see this error.
[J2EE:160149]Error while processing library references. Unresolved application library references, defined in weblogic-application.xml: [Extension-Name: oracle.webcenter.framework, Specification-Version: 11.1.1, exact-match: false], [Extension-Name: oracle.sdp.client, exact-match: false].
there is some miss match in library reference.
Please check with your weblogic-application.xml file.
Regards,
Kal

Using Weblogic Console Extension tag library...

Now i am working with weblogic 8.1
I am using Weblogic Console Extension Example...downloaded from dev2dev.bea.com...
at that example console Jsp program is as below for
the development of node...
 
<wl:node
label='<%="My Console Extension"%>'
icon='/images/folder.gif'
expanded='true'>
</wl:node>
 
But i want two folder icons...for open folder...and closed folder...
 
i have gifs...but how i modify this
jsp...or tag library...any one can help me...
 
raju

"Otherwise let me know tools that can tell me threads, memory, cpu, etc and provide notification, etc." -- Hi, I'm familiar with a third-party tool that is suitable for larger deployments, it collects the data you mention for Weblogic instances and also does performance monitoring at the cluster level. Here is a description of their WebLogic integration pack -- http://www.evidentsoftware.com/products/clearstone-for-weblogic/. Hope this helps.

How to dynamically validate users at run time using connection pools ?

Hi Folks
We are facing a peculiar situation . We have established connection to our
oracle 8i database using Oracle Thin driver using conenction pooling at the weblogic
server . We set up connection pools at the console to set up connections to thge
oracle 8i database. However the user name and password is always static when
we create the connection pool at the console .
How do i dynamically validate other users using the same connection pool ??
Eg - The connection pool at design time in the console uses user A and password
- passA . Now at run time lets say I prompt the user for a login screen and want
to trap the user id and apssword parameters entered by the user and use it with
the connection pool created earlier . I tried using the below code snippet :-
Properties props = new Properties();
props.put("connectionPoolID", "Oracle_Thin_Driver_Pool");
props.put("user" , userId );
props.put("password",userPass);
myDriver = (Driver) Class.forName("weblogic.jdbc.pool.Driver").newInstance();
conn = myDriver.connect("jdbc:weblogic:pool", props);
But always it connects to the database using the userid and password set in the
console while creating the connection pool . So how i get the connection pool
to validate my current userid and password entered through the login screen ??
Thanks in advance
Keith

Hey Bob.
So I assume you're -completely- working with built executables? You're not going to work in the editor environment to modify your projects at all?
If this is the case, then having a generic deployment phase at the beginning of the executable (with a "setting up hardware for your app" splash screen) isn't a bad idea -
Check the binary on the target, ensure it matches the binary you have on the host machine (in case you ever decide to update).
If they don't match, FTP the new file down to replace the old one.
FTP the ni-rt.ini file, ensure the startup exe is enabled and is pointing to the correct location.
If it's not enabled or not pointing to the correct startup file, modify the .INI file and FTP back to the target.
If you had to update the INI file, ask target to reboot itself. Wait 30 seconds, and wait for target to become available again.
Connect to the target. If you cannot connect, reboot target. If the target comes back and you still cannot connect to the app, notify user.
That's almost exactly how we handle installation and deployment via MAX.
The big assumption here is that the built executables were all built with the same version of LabVIEW Real-Time. If not, you'd need a system replication step in there to make sure the proper version of LabVIEW is on the target before launching the built .rtexe.
-Danny

WSDLXML error in Web services for real time job

Hi Experts,
I want to use Data Services as a web services.
I have configured a Batch job and Real time job that is available as a web service.
Web services for Batch job is no problem. but Real time job is problem
I get the following error message in the WSDLXML
<tns:documentation>Web Services published by BusinessObjects Data Services Version 12.1.0.0, using Apache Axis 1.1The following errors and warnings were found during WSDL generation. Please refer to the Data Services Administrator for detailed explanations. *** Unable to create WSDL for service: job_testconnectivity.</tns:documentation>
Version is DATA SERVICES XI (12.1.0.0)
Edited by: moon bum cho on Dec 1, 2008 3:00 PM
Edited by: moon bum cho on Dec 1, 2008 3:15 PM

check whether the Access Server for which this service is configured is running
the real-time service configuration is saved with Access Server, management console will get the information from Access Server while generating the WSDL
to check the status of access server
click on administrator -> Access Servers
click on the Access Server and click on Ping

Need to update content on web page in real time...

Hi all,
I am using jsp with struts to display some information in a web page.
Let's imagine i am displaying a list of stocks and its price in a web page. I want to upload the price of the stock as they are changing. I like to do it in a smart way: it is... i don't like to refresh the whole page every x seconds, i just like to change the value of the field that changed in the server in real time.
Which are your suggestions? My coworked told me to hava a look in Ajax... What do you think about it?
Thanks,
Dani.

Well first thing which i wanna emphasise on AJAX is not the replacement of this it still uses similar logic refreshing of X secs.
Rather instead of refreshing the whole page one would only refresh a view.
If you are using looking at a solution to achieve via struts here is where you should go in read it and look for a solution.
http://today.java.net/pub/a/today/2005/10/27/sprinkle-ajax-magic-into-struts-webapp.html
http://wiki.apache.org/struts/AjaxStruts
http://www.omnytex.com/articles/xhrstruts/
Hope this might help :)
REGARDS,
RaHuL

Any good Power Shell command or script to see connected users in real time for Lync 2013

Are there any good Power Shell commands or scripts that can tell you how many users are connected to a pool in real time so you can evaluate the current load. I have 3 FE servers in a single pool. We just started deploying the lync client to the users and
were curious as to how many are actually connected. I saw a number of home made scripts but really didn't care for any of them. I just want to find out how many users that are actually connected to the pool at a particular moment so we can see how many users
are really using the product.

Have you looked at Pat Richard's get-csconnections script?: http://www.ehloworld.com/269
Please mark posts as answers/helpful if it answers your question.
Blog
Lync Validator - Used to assist in the validation and documentation of Lync Server 2013.

How do i use multiple threads( very much real time), using JavaFX?

I'm creating an application, using JavaFX because one can create awesome GUI using JavaFX. I need to know how to create real time multiple threads using javafx.
JavaFX doesn't support creation of multiple threads, but i think there is another way of doing it. I need it work in real time as my application works with an hardware (wacom intous 3 tablet), and i need mutiple threads to get all the parameters from the stylus of the tablet simultaneously...
any code which will help me out or explaination on how to go about this is appreciated...
Help required quickly...

See example at
[http://jfxstudio.wordpress.com/2009/06/09/asynchronous-operations-in-javafx/|http://jfxstudio.wordpress.com/2009/06/09/asynchronous-operations-in-javafx/]

How can 2 users collaborate real time on a Pages document?

I have two computers at home: an iMac and a macbook pro. We have no problem sharing document via the wireless Timecapsule network. Recently, as we have been deep in editing documents using Pages, we were trying to find out how to configure pages so that we can both edit the same document at the same time (collaboratively) and see each other's edits in real time as we progress. Google docs has this option but it's rather slow.
Is there an option to do this in Pages on a local network?
If no, do you know of any other Apple programs that let you collaborate on text document in real time?
Thank you.

Welcome to the forums!
Pages cannot do what you want. Most word processors can't. However, there are a few solution that can. SubEthaEdit is a collaborative text editor for the Mac, so it can handle this kind of task. It has received pretty positive reviews. You might also check out Collaborate, UNA (although this is more intended for software development), and Gobby.

Default Web Application is not visible in Weblogic Console

We are using Weblogic 5.1.0 SP7
          We moved our Application from the Implicitly Defined Default Web
          Application which is configurated by the
          weblogic properties to a Web Application. Because we don't want to
          change any URL in our Application, we
          decided to deploy it as Explicitly Defined Default Web Application.
          By this we recordniced that the weblogic.httpd.defaultWebApp property
          worked not that way descibed in the
          Weblogic Documentation. You have to write the path to the WebApp not the
          name!
          So we have the following Entry in the weblogic.properties:
          weblogic.httpd.defaultWebApp=i:/if_home2/web
          This works fine. The Server starts and serves the WebApp the way we
          expected. But wenn we start the Weblogic
          Console the WebApp ist not visible in the "myserver/HTTP/Servlet web
          applications" folder. This one is empty
          now! Previously the "General" Entry for the Implicitly Defined Default
          Web Application was shown here, which
          showed our Servlets and JSP's and their hit count and parameters.
          So there is no chance to monitor the Servlets and JSP's of the default
          Web Application.
          I tried to deploy our WebApp a secound time with
          weblogic.httpd.webApp.OurApp=i:/if_home2/web
          but this create a second independent WebApp. OurApp is shown in the
          Weblogic Console but it does not monitor
          the hits to the default WebApp. So this is not a solution!
          Any idea to make the default Web Application visible in the Weblogic
          Console?


in my development environment i checked in site collection feature, it isn't available in site collection feature but still i am getting those web parts in web part gallery while adding it on page.
Also, in Production environment, feature is available in /templates/features folder after deployment, but not available in web part gallery while adding it on page.
I tried with uploading .webpart file which is available in /templates/features production environment as i mentioned, is running for one web part. Not for second web part and giving me security error.
As, uploading .webpart file is not feasible solution, please tell me how could i do that with .wsp file?
please tell me what could be another workaround.

Default Web Application ist not visible in WebLogic Console

We are using Weblogic 5.1.0 SP7
          We moved our Application from the Implicitly Defined Default Web
          Application which is configurated by the weblogic properties to a Web
          Application. Because we don't want to change any URL in our Application,
          we decided to deploy it as Explicitly Defined Default Web Application.
          By this we recordniced that the weblogic.httpd.defaultWebApp property
          worked not that way descibed in the Weblogic Documentation. You have to
          write the path to the WebApp not the name!
          So we have the following Entry in the weblogic.properties:
          weblogic.httpd.defaultWebApp=i:/if_home2/web
          This works fine. The Server starts and serves the WebApp the way we
          expected. But wenn we start the Weblogic Console the WebApp ist not
          visible in the "myserver/HTTP/Servlet web applications" folder. This one
          is empty now! Previously the "General" Entry for the Implicitly Defined
          Default Web Application was shown here, which showed our Servlets and
          JSP's and their hit count and parameters.
          So there is no chance to monitor the Servlets and JSP's of the default
          Web Application.
          I tried to deploy our WebApp a secound time with
          weblogic.httpd.webApp.OurApp=i:/if_home2/web
          but this create a second independent WebApp. OurApp is shown in the
          Weblogic Console but it does not monitor the hits to the default WebApp.
          So this is not a solution!
          Any idea to make the default Web Application visible in the Weblogic
          Console?


Hello Nadar,
Tell me how are you starting server in the cluster, through nodemanager or commnadline.
Kuldeep

Using weblogic console without jdk

Hi,
          We are not allowed to have compilers installed in our production environment. Thus we have to remove the jdk that is shipped with the weblogic installation and only use the jre. For our own applications we precompile the JSP pages at build time, so we don't need the jdk.
          The problem is that the weblogic admin console is also built with JSPs. Does anyone know if it is possible to tell weblogic to install the admin console with pre-compiled JSPs? Or is there another way to use the console whithout having the jdk installed?
          Best regards
          Orjan

Hi.
I need a bit more detail. What exactly do you mean when you say you have
multihomed the server with 5 different web sites? What is your configuration?
How are you connecting to a specific instance? With a java program or
browser? What URL are you using?
A single instance of WLS will bind to only 1 IP address using the
weblogic.system.bindAddr property. Are you starting 5 instances of the server,
each binding to a unique IP address? Having a multihomed machine does not mean
that a single instance of WLS is listening for incoming requests on all IP
addresses.
Thanks,
Michael
Tim Nields wrote:
I am currently running Weblogic 5.10. I have successfully managed to
multihome the server with 5 different websites. However I am running into
problems when attempting to connect to a specific instance. The error that
I am receiving is:
Cannot Connect:
Unknown NamingException, class= javax.naming.NamingException
I have a mirrored machine and I am able to connect using the weblogic
console, but I can't connect to a single one on the other. Can anyone
please offer some help as to why this would be occuring.
Thanks in advance.
Tim Nields--
Michael Young
Developer Relations Engineer
BEA Support

Can't start WebLogic Server with SP6 and jdk1.2.2 using WebLogic Console

Hi All,
I am trying to install WebLogic 5.1 with SP6 under Windows NT 4.0 with SP6. My goal is to run JSP/Servlets. After going through all the steps described in SP6 Readme I am getting th following exception:
ava.lang.reflect.InvocationTargetException: java.lang.NoSuchMethodError: weblogic.boot.ServerClassLoader: method getClassLoadNotify()Lweblogic/boot/ClassLoadNotify; not found
 at weblogic.utils.classloaders.GenericClassLoader.<init>(GenericClassLoader.java:140)
 at weblogic.utils.classloaders.GenericClassLoader.<init>(GenericClassLoader.java:112)
 at weblogic.utils.classloaders.GenericClassLoader.<init>(GenericClassLoader.java:104)
 at weblogic.utils.classloaders.RecursiveReloadOnModifyClassLoader.<init>(RecursiveReloadOnModifyClassLoader.java:53)
 at weblogic.utils.classloaders.RecursiveReloadOnModifyClassLoader$SingleSlave.<init>(RecursiveReloadOnModifyClassLoader.java:149)
 at weblogic.servlet.internal.ServletContextImpl.setClassLoader(ServletContextImpl.java:1408)
 at weblogic.servlet.internal.ServletContextImpl.<init>(ServletContextImpl.java:518)
 at weblogic.t3.srvr.HttpServer.initServletContexts(HttpServer.java, Compiled Code)
 at weblogic.t3.srvr.HttpServer.start(HttpServer.java:388)
 at weblogic.t3.srvr.T3Srvr.start(T3Srvr.java, Compiled Code)
 at weblogic.t3.srvr.T3Srvr.main(T3Srvr.java:827)
 at java.lang.reflect.Method.invoke(Native Method)
 at weblogic.Server.startServerDynamically(Server.java:99)
 at weblogic.Server.main(Server.java:65)
 at weblogic.Server.main(Server.java:55)
The installation document is pretty bad intermixing different types of installations. Where can I find steps or what do I need to do to get WebLogic to run with JDK1.2.2 if I want to start it up from WebLogic console only?
Thanks,
Mark.

Try rather using the 1.4 version available here: http://java.sun.com/j2ee/1.4/
and use this dedicated forum: http://forum.java.sun.com/forum.jsp?forum=136
-Alexis

Monitering web users at real time using weblogic console?

Similar Messages

Maybe you are looking for