Moved to new server and needing help with feed

My website www.gothamknightsonline.com has been moved to a new server and I am needing to keep the feed updated with new and old podcasts. I have reposted some of the old episodes as well as a new one I just posted. I have not been able to get the feed to show up. When I view our podcasts itunes page all of the info on each individual podcast is now gone with just the episodes listed and no more information.
Here is the feed URL: http://gothamknightsonline.com/category/podcast/feed/ (I have verified the feed) but I am not certain if this is the same feed URL that was listed before. Either way the plugin i used for my podcasts in wordpress has this in the feed as well as our iTunes id and URL ( http://itunes.apple.com/us/podcast/batman-gotham-knights-online/id315370686)
I am doing all of this on a Wordpress blog using the podpress plugin.
Any help would be appreciated. Thank you
-Garrey

iTunes is looking for a feed at http://www.gothamknightsonline.com/feed/?cat=10 and not finding it - checking this I don't get 'file not found' but if there is a file there it contains no data whatever.
I assume this is your original feed URL. The method for redirecting iTunes to another feed URL involves placing a special tag in the original feed, and is described in detail here:
http://www.wilmut.webspace.virginmedia.com/notes/podcast.html#move
Your new feed contains this tag (effectively redirecting to itself); you need to place a copy of the feed, with the redirect tag, at the original URL and leave it there for a couple of weeks. If you are unable to do this the two alternatives are described in my article.

Similar Messages

New here and need help with design

Hello all, I am working on my son's first birthday thank you cards. I need help removing the line in between the blue and green background. Thanks. Stacey

You also have a narrow black line on the lower left side.
Increase the the magnification to 500% and select the black and the white lines with the Magic Wand (Continuous checked). Feather by one pixel. Sample the green right under the white line, make it the Foreground Color and fill the selection with it.
Juergen

New here and need help with FX1 and FCE

Hey all -
I shot a lot of video this last summer on a Sony FX1 in HDV. I am capturing the video using FCE. I have my Easy set up for HD, 29.97, and HDV - AIC 1080i60.
I am in the US not using PAL.
I can capture the video fine, and export to quicktime fine. I get what seems is good video capture with the following problem:
My video looks fine in the view finder but once captured, it is desaturated and lacks any color.
I do not know much else about FCE. I do not want to do much editing, just grabbing and creating some .mov files for sharing. I just want to see better color.
Questions then...
1. How to boost color?
2. How to color correct for neutral density?
3. What size is best to save as largest size and quality?
I am viewing on a color corrected Apple Cinema Display 23" that I use to edit my photos and use Monaco Optix XR Pro with ColorEyes Pro.
Thanks.
Randal

Keep in mind that computer displays will not have the same gamma and color space of NTSC or ATSC television.
-DH

I'm brand new here and need help with invalid sim in 8120

Hi. I just got an 8120 from someone on Ebay who said the phone was unlocked. I have AT&T and when this phone is powered on it says Cincinnati Bell - and at the top of the screen it says Invalid SIM... I'm guessing either its NOT unlocked or maybe its just an incompatible phone... any ideas?

It sounds like you are absolutely correct. It was probably not unlocked or elase it should work with any sim you put in. There are a ton of sites to purchase the unlock code. Try a google search, most of the codes will run you about $30. You can also find sellers on Ebay that provide unlock codes.

Project Server 2013: I am using Project Server Permission Mode and need help with permission assignments?

Hi
Project Server 2013: I am using Project Server Permission Mode and need help with permission assignments?
How can I change Permissions for the individual users to see specific projects or all projects in project center and to see specific quick launch items?
For Example: if i have 4 users, A, B, C and D. what i want is:
User A can see everything and act as a project manager or Admin.
User B can view all projects in project centre but can change the schedule or resource assignment etc.
User C can only act as approver of projects and can view all projects in project centre.
User D can only view specific projects for which permissions are given.
can i have some expert help in sorting and understanding permission modes... as i was playing with project server mode permissions and can't figure out how to apply the above scenario to set of my user.
Thanks in Advance
Cheers
AJ
Ajay Kumar

Hi Ajay,
Please refer to this link for detailed explanations about PS2013 security model.
http://technet.microsoft.com/en-us/library/cc197638(v=office.15).aspx
Actually, it will take a couple of days to explain in detail the security model that is a fundamental and tricky aspect of every PS implementation. But basically, you NEVER set permissions for a single user. You have groups in which your insert users. Groups
define "what users can do". Then you associate groups to a corresponding category. Categories define "what user can see". Thus the association of a group with a category will set "what the user can do on the objects he can see". Then, for more advanced security
level, you can use the RBS that will consist in "branches" in which you'll insert users. Based on those branches, you'll customize categories to fine-tune what user can see (for projects and resources) depending on the RBS branch and level.
I'd advice you to start "playing" in a test environment with the default categories/groups that might probably cover your need.
Concerning your 4 users:
user A : add him to the "administrator" group. Be careful that you're mentionning either project manager or administrator, which are 2 groups/categories with totally different permissions level.
user B : basically can see everything and change everything? it could be in the project manager group, assuming that there are no project visibility restrictions on the category via the RBS.
user C : waht do you mean by "approver"? Workflow approvals? Then it will be the portfolio manager group. Task update or timesheet approval? Then it is another long topic: please refer in the documentation to the "status manager" and "timesheet manager"
concepts. There are not related to the security model. In a few words, the status manager is the owner of the project plan, is defined for each task and approves tasks updates. The timesheet manager is an attribute defined for each resource in its parameters
and approves resource timesheet.
user D : you have to define which permission level must be given to this user. Basically it could be a team member that will see only projects he's in the project team. Note that team member cannot interact with the project plan in another way than submitting
timesheets and/or tasks updates which must be approved.
Once more, those are large and complex subjects that require a deep dive into your business model and tons of tests in a test environment.
Hope this helps.
Guillaume Rouyre - MBA, MCP, MCTS

I am setting up a new iMac and need help syncing files to Dropbox. On my old computer I had it set where when I saved a document, it was saved on my hard drive, as well as to a folder in Dropbox. I can't remember how I set this up. Any help?

I am setting up a new iMac and need help syncing files to Dropbox. On my old computer I had it set where when I saved a document, it was saved on my hard drive, as well as to a folder in Dropbox. I can't remember how I set this up. Any help?

The way that Dropbox works is that it keeps a copy of all your files in your local Dropbox folder on your hard drive (which is, by default, directly under your home folder). Adding files to that folder will sync them to the Dropbox server.
You do of course have to download the Dropbox application to enable this (download link at the top right of http://dropbox.com ).
Matt

Urgent: im new and need help with this task!

I need help with converting the pseudo code to java code, Any help will b greatly appreciated!
// Declare a variable of type int, called "choice".
// Generate a random number between 0 inclusive and 7
// exclusive, and store that number into the variable
// "choice". (How do you generate a random number? Use the
// nextInt(int) method inside the random object, which takes
// a single int parameter. You can read about this method
// here:
// http://java.sun.com/j2se/1.5.0/docs/api/java/util/Random.html
// If "choice" is equal to 0, then create and return a new
// IBlock object, passing "game" as the parameter to IBlock's
// constructor.
// Otherwise, if "choice" is equal to 1, then create and
// return a new TBlock object, passing "game" as the
// parameter.
// Otherwise, if "choice" is equal to 2, then create and
// return a new OBlock object, passing "game" as the
// parameter.
// Otherwise, .... etc ....
// (please continue to do this for all of the 7 kinds of block
// that can be created)

import java.util.*;
public class Echo{
     public static void main(String[] args)     {
          //System.out.println("enter ur choice");
Random r=new Random();
int choice=r.nextInt(6);
     switch(choice)
     case 0:
          IBlock object0=new IBlock("games");
          break;
     case 1:
          TBlock object1=new TBlock("games");
          break;
     case 2:
          OBlock object2=new OBlock("games");
          break;
     case 3:
          LBlock object3=new LBlock("games");
          break;
     case 4:
          JBlock object4=new JBlock("games");
          break;
     case 5:
          SBlock object5=new SBlock("games");
          break;
     case 6:
          ZBlock object6=new ZBlock("games");
          break;
class TBlock
     TBlock(String s)
          System.out.print("TBlock called"+"\n value passed is "+s);
class IBlock
     IBlock(String s)
          System.out.print("IBlock called"+"\n value passed is "+s);
class JBlock
     JBlock(String s)
          System.out.print("JBlock called"+"\n value passed is "+s);
class OBlock
     OBlock(String s)
          System.out.print("OBlock called"+"\n value passed is "+s);
class LBlock
     LBlock(String s)
          System.out.print("LBlock called"+"\n value passed is "+s);
class SBlock
     SBlock(String s)
          System.out.print("SBlock called"+"\n value passed is "+s);
class ZBlock
     ZBlock(String s)
          System.out.print("ZBlock called"+"\n value passed is "+s);
}

Moving to new server and from 11.2.0.1 to 11.2.0.3 at the same time

I have 2 11.2.0.1 databases running on windows server 2008, and am moving them to a VMware server running the same OS.
While I am doing this, I figure I may as well apply the 11.2.0.3 patch by installing it on the new server and upgrading the databases.
I've yet to do an "out of place" patch, so I'm assuming I can do the following:
Install 11.2.0.3 on the new server running the setup.exe -downloadUpdates command, copy backed up datafiles (from online or offiline backups) over from current prod databases, restore them with rebuild controlfile & open database, then shut down and do startup upgrade?
Or would it be a better practice to create the databases on the new server and just do full imports?
thanks in advance.

Thanks - since the first one I am moving over is a test database, I just created the instance on the new server, shutdown the source test database then copied sp & control files & datafile directory structure over with data files, and decided to try DBUA rather than startup upgrade. Right now it's about 1/2 way through the upgrade so we'll see how it goes.
For the production database I am going to first try my cloning technique then do a startup upgrade or use DBUA. What I'm thinking about doing is copying my last (user managed) online backup over (after creating the instance & directories), doing a startup no mount, rebuild the controlfile to reflect any changes, recover with backup controlfile & apply latest redo, open with resetlogs then shutdown and startup upgrade (or DBUA).
If that works well that's probably the way I'll do the actual production roll over this way, but leave it in recover mode until I shutdown the old database and apply the last redolog, then upgrade it.
I suppose that given these databases are relatively small I could also do the upgrade first then just drop the schemas with tables in them and do a schema level impdp.

Just Bought New Mac Mini Server and Need Help on Migrating Old Single User

This is for my home / home office The issue is I was unable to connect to my old computer using migration assistant for some reason, but I didn't want to go down a rabbit hole to figure it out.
I would like to transfer all of my applications and prefs / settings to the new machine and I was thinking about using a synching program to do it so I wouldn't mess with the SL Server settings. I suppose I could do this manually but am concerned some hidden files or settings may not get moved properly. I am able to mount my old hard drive on the new mini so I just need a strategy. Thanks.

Good question - my angst is subsiding as I type. I was concerned that my preferences and other application linked things like Application Support were the same as it was, but I suppose if I have to mess a bit with it upon opening or reinstalling a program is the worst thing that will happen. After going thru the list of programs I realize that like most people I regularly use about 15% of the things in my Applications folder. The biggest hassle is Adobe CS4 which I need to get reauthorized by Adobe and this could only have been solved if I de-authorized it before blowing out my earlier computer. Luckily that is worst issue I am encountering.

HELP !!!!!!! i new to OS X Server and need help setting up WINS (in DHCP)

i Need help on how to setup the WINS part of DHCP
can any one help ?
what should my settings be for ?
WINS/NBNS PRIMARY SERVER:
WINS/NBNS SECONDARY SERVER:
NBDD SERVER:
NBT NODE TYPE:
netBIOS SCOPE ID:
i have DNS, SMB, AFP, Open Directory all setup
just dont get WINS
kinda old school isnt it ?
so if some one could help i would be thankful \
Jono.

thanks sorry for the "noob" question,
i am having one problem with windows computers not showing up in finder & on the windows computer the OS X Server wont show up when you go to map a driver. or in vista the "networking" place. but you can type in the IP address of the server and it will find it.
all the computers are getting DNS and DHCP from the server but i cant figure out what happening.
there only one server and its OS X leopard 10.5.6
is this because WINS ? or some thing else
and sorry for asking i don't really like asking.
but thanks for the help. ir im being to much of a "noob" just dont reply haha
Jono.

New logic user, need help with multi-channel inst and aux strips.

Greetings all,
So I just purchased a new Mac Pro 2.66 and Logic Pro 7 to run with it. I have been a long time Nuendo/Cubase user on the PC side of things but since I got the Mac I wanted a DAW that was supported fully for the apple platform.
Anyways, its a world of difference and I am very confused as I wrap my head around the learning curve, so in the meantime I have one important question maybe some one could help me with.
The question is regarding Aux channel stips for Multi channel instruments. In this scenario I am working with Battery 3, it took me a while to understand that I actually needed to create these aux channels just to have seperate outs in Battery which seems really wierd and overly time consuming.
As an example in Nuendo once you create the instance of Battery, the audio mixer automatically just creates the corresponding stereo and mono channels instantly. This obviously makes is a sinch to assign Batteries pads to seperate outs for eq/comps for seperate sounds.
Now the Battery manual doesnt even make a reference to Aux channels for assigning outs in Logic, I actually had to do a Google search to figure this out.
Anways, sorry for rambling...
Here is the main issue.... How can I quickly and easily create multiple Aux's? In the mixer there is really only enough room in there to add like 1 more Aux strip, if I want to add more than that I need to re-arrange the entire global mixer which seems like a crazy system, surely there must be a more convenient method for getting muti-channel audio instruments set up quicker.
Any help you can assist with would be exceptional!
Thanks in advance.

Not sure what exactly your question is, especially since I don't use battery. But as far as creating aux tracks:
• go to the audio layer of the environment (not the track mixer window), find the two defalt aux tracks
• Highlight all tracks to the right of the aux tracks (these should be bus and output tracks), and drag to the right far enough to fit in a bunch of aux tracks; you might even want to drag the all underneath the aux tracks, if your screen accomodates
• use the key command shift-command-a multiples times to create several new "audio objects", and double click each one to expand
• highlight all the new objects and select options/clean up/ align objects (makes it look nicer)
• still highlighted, over in the parameters section (left side) select a channel, setting it to the highest number aux (at this point, probably "aux 3")
• now individual set the channel for each aux track – you'll see that now you have available "aux 4"; next time you set a successive track you'll see "aux 5" and so on
• once you've got things set up the way you want, save it as a template so you don't have to do this again later

I am really new and need help with internet

Hi. I am really excited about the new MACS and want one really bad. First, I need to know what I would need to get for wireless internet. Next, are Macs compatible for Internet like MSN?
iBookG4 Windows XP I want to get an iBookG4

I have a PowerBook G4 17 with a gig of ram that I absolutely couldn't live without. I use a Verizon aircard for internet access, and it's proven to be about 90% as fast as a high speed cable connection. I routinely send pics up to 3M in size with no problem. The only thing I have found that it really doesn't do very well is downloading software. And the Verizon card is really affordable--I have an unlimited plan that doesn't hurt each month at all. Hope this helps.

New to MACs and need help with a built-in video camera in MACBOOK

My mother and father just purchased a new MACBOOK a few weeks ago. They reside in Florida and we live in Indiana. We have a wireless camera that is connected to our wireless router. We call my parents and talk to them while we are on camera so they can see their grandchild.
I just found out their new MACBOOK had a built-in camera and I'm wondering how we can set that up so we can see them at the same time? Our child would love to be able to see his grandparents while we talk to them.
Our wireless camera has a built-in server and runs to a specific spot on our website so they can access it. But I don't know how the MAC works or what to do to tell them to set up the computer so we can see them.
Can someone direct me to some instructions on what I can do or give me some direction? I would really appreciate it.
Thanks!
John

I use a Dell Dimension for my computer. I do not use Skype at all. The wireless camera we have on our home network is a Dlink 900. It does not have any sound capabilities so we were not too worried about being able to have a true "video conference" with their laptop. We jsut wanted to be able to see them. I don't know if that video image can be sent to a webpage (like our d-link camera does) or not. Or, maybe there is a much easier way of doing this that I'm not aware of.
Thanks for your response.
John

New to Dreamweaver and need help with PDF and Word

I'm trying to put forms on my web page http://www.troop4084.org and I cannot get them to show up on the internet. I have them in the folder. If there is a step-by-step process to do this?

johnnyc54 wrote:
I think so, that may be the issue. I'm still looking at that one to figure it out. My pictures work fine
and I followed the same procedure for the Word/PDF documents...
Your images are in the 'images' folder:
http://www.troop4084.org/Images/Anacortes%20Sign.jpg
The pdfs are neither in the images folder or where the links says they are in the site folder itself.
See the link below - It says the FOS.pdf is in the site folder itself. Not in any other folders.
http://www.troop4084.org/FOS.pdf
If you upload the FOS.pdf to the site folder on your server the link will be correct.
or you can put the FOS.pdf in the 'images' folder and change the link to as below:
http://www.troop4084.org/images/FOS.pdf
or you may want to create a 'pdf' folder on your server and upload the 'pdfs' into that with the link below:
http://www.troop4084.org/pdfs/FOS.pdf

New to Blackberry and need help with calendar

Hi all,
Just got my very first BB and could do with some help with my laptop and calendar (don't know if what I want is possible or available, so sorry it its not )
I got my BB for my personel use and want to be able to sync it with a calendar on my laptop. I don't have microsoft outlook, so I was wondering if anyone knew of a application or download I can get that will give me a calendar on my Laptop that I can sync with my BB.
Many thanks
Abi
Solved!
Go to Solution.

Abi, welcome to the Forums.
Google Calendar sync is a perfect option.
http://www.google.com/mobile/blackberry/sync.html
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Moved to new server and needing help with feed

Similar Messages

Maybe you are looking for