MRP Type is grayed out in the material master

Hi all,
I am creating material on my own.The thing is that the MRP type is grayed out in the MRP 1 view.I want to maintain the MRP type. Can any one help

Dear Mano
You have not specified which field you want to edit / maintain data.  Anyway, please do the following:-
Go to material master, select the MRP view which you want to make as editable.  Now place your mouse on the required field and press F1.  Make a note of the Table and Field name.
Now go to OMS9, press F4 in Field so that some fields will be displayed.  Select the above field  and press Enter key.  Below you will find the options to change as Hide, Display, Reqd Entry, Opt entry.  Make the required changes and now check the material master.  Like this, you can make changes for other fields also.
G. Lakshmipathi

Similar Messages

  • MRP TYPE for  Periodic planning in the material master.

    Dear gurus,
    i need planned the materials in the periodic modality, are there the type MRP in the material master for create the planned file ( table MDVM) one once a month or in the specific period chose ?
    Example :
    I need that the material master don't create a file planned ( MD20- TABLE MDVM) for a change of the requirement situation new , but i would like that the flag in the table ( MDVM) or file of the planning MRP created when the today date is in the period specific.
    31.3.2011  (or period 1.4.2011- 10-4-2011)Date for the create a file MRP and after when run MRP planned the material, for others scenary the system must not planned the material.
    Are there the MRP type for my problem? Or the customizing setting?
    Thanks a lot

    Not sure if MRP type or customizing can help here. And even if we are able to achieve this requirement it will be applicable at plant level.
    However, try exploring option of periodic lot size (weekly, monthly, etc). This will work according to period you've set and should give you the results you are looking for.

  • When I type in my account password, the password "dots" gray out and the message "There has been an error" appears.  I cannot access my computer in any way.  Any help would be appreciated.  Thank you.

    When I attempt to sign in to my administrator (or other) account  the computer hesitates, the password "dots) gray out, and the message, "There has been an error" appears.  I have tried the usual methods of password recovery but nothing has worked so far.  I would appreciate any help you can give me.  Thank you very much for your attention to my problem.

    JD1100 wrote:
    I have MacKeeper installed
    Oh dear.
    Many users will see references to an application called MacKeeper on various web sites and via pop-ups on their browser. Not only is it expensive for what it purports to do (freeware applications that do the same or more are readily available), it can sometimes install itself without the user realising it, and it can be very tricky to get rid of.
    Most positive reviews of it have been found to have been paid for by Zeobit (developers of MacKeeper) in the form of ‘free upgrades’ etc. For example (posted by fellow contributor Softwater), on their Facebook page and on their webpage they have this apparent endorsement from UNC Charlotte: 7/450-259/Screen+Shot+2012-06-17+at+17.04.04.png
    Softwater contacted the Director of IT at the College of Arts and Architecture UNC Charlotte, about whether they endorse MacKeeper and his response, quoted here, was:
    No, please do not download and install MacKeeper. We have seen problems with this software in the past.
    MacKeeper has been described by various sources as highly invasive malware* that can de-stablize your operating system, adding that it is unethically marketed, with a history of making false advertising claims, by a company called Zeobit and a rip-off.
    For more details about Zeobit’s alledgedly fraudulent advertising and paid-for ‘reviews’, and their dubious marketing practises, read this:
    Further opinion on it and how to uninstall MacKeeper malware can be read here:
    MacKeeper have recently said that the uninstaller from here: re/
    now works.
    This is also worth reading:

  • Wrong procurement type showing in the material master

    I am creating a material Procurement type is comming as E in the MRP2 view, To where it is comming?
    I have checked the material type setting in the tcode OMS2 and it below are showing there:
    Ext. purchase orders   2
    Int. purchase orders   2
    Hence it's allowed int. and ext. proc. then why in the material master procurement type is comming E not X.
    How can I change it?

    Check to see if you have assigned an MRP Profile which has defaulted Procurement Type. If this is the case, you will have to remove the MRP Profile before you can change the entry. Or you can maintain the MRP Profile by deselecting "Write-protected in material maintenance" and selecting "Only default value in material maintenance" for Procurement Type. The Transaction is MMD2.

  • Server grayed out in the console

    I have several servers which are becoming grayed out in the console very often.
    I found the article but it did not apply as I have already SCOM 2007 R2 CU7 .
    on #1 the event 
    Event Type: Error
    Event Source: Service Control Manager
    Event Category: None
    Event ID: 7031
    Date: 9/15/2014
    Time: 10:24:36 AM
    User: N/A
    Computer: VOSMARTPUMP1
    The System Center Management service terminated unexpectedly. It has done this 5 time(s). The following corrective action will be taken in 60000 milliseconds: Restart the service.
    For more information, see Help and Support Center at
    is happening after each restart of the healthservice then it becomes event id 7034
    Event Type: Error
    Event Source: Service Control Manager
    Event Category: None
    Event ID: 7034
    Date: 9/15/2014
    Time: 10:25:57 AM
    User: N/A
    Computer: VOSMARTPUMP1
    The System Center Management service terminated unexpectedly. It has done this 7 time(s).
    For more information, see Help and Support Center at
    any idea?
    System Center Operations Manager 2007 / System Center Configuration Manager 2007 R2 / Forefront Client Security / Forefront Identity Manager

    How is antivirus software configured?
    Recommendations for antivirus exclusions that relate to Operations Manager
    What if you reinstall the agent on one server, still the same error?
    Same issue here:
    Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread.

  • HT4623 I updated my mini, but some of my apps are no longer available. One of them I purchased from the Apple store.  They are grayed out with the word "waiting" underneath the app.  Any suggestions?

    I updated my mini, but some of my apps are no longer available. One of them I purchased from the Apple store.  They are grayed out with the word "waiting" underneath the app.  Any suggestions?

    If there are multiple apps trying to download at once, only one can download at a time and the rest say "Waiting" until it is then their turn. Try this. Double tap the icon of the Waiting app, and it should resume the download.
    How to Solve the Problem of An iPad App Download Stuck on “Waiting” stuck-on-waiting
    How To Get Rid Of Your iPad App Download Frozen Problem blem-and-not-lose-years-of-your-life-video/
    Another thing to try - Turn the iPad Off & then back ON.
    If that doesn't work:
    •  Log out of your iTunes store account.  Go to Settings > Store > Sign Out Then press the Home button.
    • Then press and hold the Home and Sleep buttons simultaneously and don't release them when it brings up the Turn Off screen; keep holding them until the Apple logo appears.
    • After restart, the Waiting should be gone.
     Cheers, Tom

  • After editing an image in Photoshop it appears grayed out inside the media browser

    After editing an image in Photoshop it appears grayed out inside the media browser when I try to import into Facebook (ie.).
    What has to be done in order for me to be able to select my edited images from Photoshop whithin any media browser?

    function(){return A.apply(null,[this].concat($A(arguments)))}
    LarryM01 wrote: it as sRGB?
    Would you care to comment on why there is an advantage to do this little extra job?
    Perhaps you don't want to hear from me, I don't know.
    I'll answer just this one little question.  Try to get your mind around what color management does, I promise it does make sense (outside of unexplained problems on particular computers).
    You want to save your web image with the sRGB profile embedded because some Internet browsers are color managed, and with an embedded profile it's more likely someone will see your image colors just as you intended.
    The assumption is that a lowly windows user with a cheap monitor and Internet Explorer will be seeing any image you save as "roughly" sRGB anyway.  Tagging the image with sRGB only affects those with color-managed browsers.
    You're looking for the most possible consistency for the viewing audience.

  • Why is the camera icon grayed out in the text message screen so that I cannot text a picture on my iPhone 5?

    Why is the camera icon grayed out in the text message screen so that I cannot text a picture on my iPhone 5? I have an unlocked TMobile phone. My husband has the same phone, plan, and set up; his picture messages work fine.

    Check this it maybe the problem
    Settings > Messages > MMS Messaging > is it on?
    Hope that helps

  • Picking Area in the material master is GRAY

    If I maintain a material master manually by tcode MM01, the picking area in the WM view is not gray (changeable) when I try to change it again via tcode MM02;
    but if I create the data with LSMW, the filed is gray when I try to change it via MM02.
    Kindly please advise what the reason is.

    It is hard to follow this thread. On 8/19 at 4:51you wrote:
    the WM view is not gray (changeable) when I try to change it again via tcode MM02
    on 08/21 at 8:06 you wrote:
    I extend WM views of material master via transaction MM02, the picking area is changeable
    and today at 3:40 you wrote:
    If I maintain the material master via tcode MM02, I can see the field "picking area" is grey,
    Can you clarify what which statement is the correct one?
    Or did you change some settings between theses statements?
    Edited by: Jürgen L. on Aug 22, 2008 8:10 AM

  • Default inspection Type In the Material Master

    We have to assign two -three inspection types in the material master. How to default this inspection types in the material master always .

    Dear JJ
    This you will have to do by putting validation in the material master. I dont think you have a standard solution for that.
    Or esle you can run QA08 wherein you can assign inspection type enmass.
    Please let meknow your feedback

  • I'm trying to Export my completed video; however, the Export option is grayed out in the File Menu.

    I'm trying to Export my completed video; however, the Export option is grayed out in the File Menu.  What am I not doing?

    Thanks for the follow up.
    From what you wrote, you have Premiere Elements 10. Is that on Windows 7 64 bit or other. For now I will assume Windows 7 64 bit. If version 10 is on Windows 7 or 8 64 bit it is a 64 bit application running in the 64 bit system which makes it possible for full use of the 64 bit resources. That is good news especially when you are trying to take a large project to completion.
    You set up the project preset in the new project dialog to match the properties of your source media. That setting directs the program to establish the right space in the Edit Mode Monitor for editing purposes. That project preset also directs the program as to what disc menu set (s, w, or hd) will be available to you in the disc menu section. The project preset also has more subtle effects on the project settings.
    What is you plan for exporting your Timeline, export to file saved to the computer hard drive or burn to disc DVD or Blu-ray? Keep in mind that the setting for the project preset do not prohibit variations in the export choice under most conditions. If you post a description of your source media and how you would like to export it, I will offer some very specific guidelines on that.
    If you do go the purchased book route, please try for one which is specific to your version 10. There has been a marked change in interface starting with version 11. Often principles remain the same from version to version, but features do not. And, I always write "It is very frustrating to be armed with principles when you cannot find a feature."
    I suggest that you start with the Premiere Elements 10 Help PDF and then decide what next.
    Also check out
    A lot of these links that say version 10, roll over to 11.
    Steve Grisetti, the moderator of this forum, writes books on Premiere Elements if you are interested in the purchased book route.
    Hope the information above is helpful. Above all do not hesitate to ask if you have questions on your Premiere Elements workflow or need clarification on anything written.
    Add On...
    I did not see SG's post before I submitted this reply to you.

  • Output type should come Automatically in the material document

    Hi All,
    How the output type will come automatically in the material document after doing some material movement through MB1C.

    Hi Bapu
    Are u asking how it is coming or you want the output to come for MB1C.
    Please check Tcode OMBR there select print version, and you can see for Tcode MB1C settings should be there.(i.e. print version must be maintained there).

  • Why is my iPhone 5 number grayed out in the iMessage?

    Why is my iPhone 5 number grayed out in the iMessage?

    Take a look at this Apple page, it has tons of tips that will help improve battery life -> Apple - Batteries - iPhone

  • Should be the bluetoot symbol grayed out when the bluetooth is turned "ON"or it should be highlighted in white like rest of the active symbols are? Please unswer this simple question clearly. Thank you.

    My blutooth symbol on the new i-Pod 2 is grayed out when the option is turned "ON". Shouldn't be highlighted white like the rest of the symbols are?

    when blue tooth is turned off in settings, the symbol does not show at all.  when BT is turned on in settings, but there is no connected device, it will show the symbol gryed out.  When BT is on, and connected to an active device, it will show as bright white.

  • Inspection type's maintained in the material master

    I want to know the transaction code using which I can check the inspection type's maintained in the material master.
    I do not want to go per material put in mass. I know that I can pull the data from tables but i do not want that.
    I want the standard SAP transaction code.
    Narendra Bora

    Well, you could make the argument that using SQVI to create a query and making this report available to select users is not really development.  It is a standard SAP transaction and users can be limited to only running certain queries. Groups of queries can be created and users assigned to groups.  By adding variants that users can't modify and locking certain fields in the variant you can limit the queries to a maximum number of records.  Usually the argument is that a user will create a massive query or set values that return too many values.  Both of these concerns can be addressed.
    I don't think a lot of people understand the full capabilities of SQVI.  You don't have to give users unlimited access to the transaction!
    If there was a "standard" report or transaction for what you want, I think between Sujit, and myself, we would be aware of it.  It is a common requirement during go lives to have to review inspection type setups.  I would hope by now we would have run across it.

Maybe you are looking for

  • Exception running FML32 sample app.

    Hi, I configured the WTC with weblogic6.1 and tuxedo7.1. I have two sample services running in tuxedo TOUPPER REVERSE_STRING I compiled the ejb classes provided for simapapp and it ran successfully. However when I try to run the simpFML32 example, I

  • BPM Dynamic assignment of task to user

    Hi, I'm working with BPM (without feature pack). I have a requirement to assign a task to a user dynamically, based on data that I pull from a DB query. If the task expires, I will assign it to another user once again based on a DB query. I

  • Itunes has stopped working. Windows will close the program....

    Hi, i need some help. I plug in my iphone, Autoplay pops up and itunes opens... i then immediately get this message: "A problem caused the program to stop working correctly. Windows will close the program and notify you if a solution is available". I

  • Menu bar and hard drive icon don't appear at last stage of boot up

    Machine froze trying to print a PDF document off a flash drive in Preview.  Had to power off the machine.  Upon restart, everything came back to life fine until the very end of the boot up process (chime fine, desktop background pictures appeared, ma

  • I need to specifiy the end of line in a delete comand in sed.

    Hi, With the substitute option ,s, I can do it easily with \\$.  Example is sed ' s\Serial0\/0\\$\Serial0\/1\g This replaces Serial0/0 with Serial 0/1 globally only if Serial0\0 is the whole string to the end of the line i.e. it won't match Serial0/0