My new 13 inch Macbook Pro and FCP and FCS 2
Until today I thought I could not run FCP and FCS 2 Full Suite because of my graphics card in my base, stock, 13" Macbook Pro. -- I'm being told that my 9400M with 256 shared memory will run these applications. That's good news to me if it's true. What are some of your views from the Pro camp please. I can bring up the memory and hard drive. I just shoot and edit in Standard Definition with my Canon Optura 50 MINI DV Tapes and my Canon HV20 with the same.
I realize I am on the low end but will it work?
Some of it will, although you might not be happy with the performance of Motion and Color will probably not install at all.
Similar Messages
-
Newest 15-inch MacBook Pro, Parallels 5, and Windows 7 Home Premium 64-bit
With the newest 15-inch MacBook Pro's on the market and with Parallels 5, Windows 7 Home Premium 64-bit should work, correct?
Yes and with Parallels 5 you get full Windows 7 support (Parallels 4 Win7 support wasn't so good) and 5 now runs in 64-bit mode on Snow Leopard (Parallels 4 only ran in 32-bit mode) so you can use more than 4GB RAM
-
I just bought myself a brand new apple MacBook Pro yesterday. Today while using it it has froze on me twice for no apparent reason. Does anyone know why this is happening?
Or have it replaced. Unless you've added a bunch of strange stuff, this shouldn't happen to a brand new one. Let your local Apple Store get you going with a MBP that works perfectly.
-
I just bought a macbook pro 13" with 4gb and would like to get aperture on it. Will aperture require too much ram for my computer? Thanks for any support.
I just bought a macbook pro 13" with 4gb
I have been using Aperture on such a system, and it was o.k. with Snowleopard and moderately sized images. After I upgraded to Lion and started to user larger image files - 30 MB tiffs, I saw the occasional beachball spinning. You should be prepared to quit other applications that will hog the RAM (like Safari), when working with Aperture on Lion or Mt. Lion with only 4 GB. If you can, follow Frank Caggiano's recommendation and upgrade to 8GB. It will make a large difference.
Regards
Léonie -
i have seen many other threads about this, but i just want to know if anyone has found a fix that actually works? or do i just need to wait for apple to send a fix in their next update?
Suppose you elaborate on what you are doing with the MBP that makes the battery life terrible.
-
I have a new MacBook Pro Mid 2012 and it goes into deep sleep when I disconnect if from AC power.
I have a new 13" MacBook Pro mid 2012 and it goes into deep sleep when it is disconnected from AC power. I have to press the power button to wake it up. Is this a known issue or is there something wrong with the MacBook Pro?
There are a few threads about this around. Its a known issue for 2012 non retina users, not sure about Apple. It should not work this way and Apple has not put out an update to fix it yet. Check out these threads for some workarounds. I think I saw if you reinstall and don't update one of the updates you get normal functionality back. Otherwise there are some terminal changes you can make to make it operate mostly normally. I made some changes in terminal.
https://discussions.apple.com/thread/4512384
https://discussions.apple.com/message/20436126#20436126#20436126 -
Brand new Macbook Pro keeps crashing and restarting - Mavericks
Hey guys, I just got a new Macbook Pro on Monday and my first time turning it on it was perfect, the next day I turned it on and kept crashing and "Restarting due to a problem", it wouldn't even make to to the log in page. Every time I power it up now I get the same issue over and over, once I make it passed the log in it is usually fine but does crash sometimes randomly but not much.
I have read here that updating to Mavericks has caused this problem but surely when it came with it and is less than a week old it should be fine? (I'm confused as to why the report says my Mac is Mid 2012, I just bought it!!) Also the only software I have installed is Microsoft Office. I do have Silverlight Plug in installed for Netflix which I read can be an issue with Mavericks.
I downloaded EtreCheck and this is the report I have. Please any help will be great!
Hardware Information:
MacBook Pro (13-inch, Mid 2012)
MacBook Pro - model: MacBookPro9,2
1 2.9 GHz Intel Core i7 CPU: 2 cores
8 GB RAM
Video Information:
Intel HD Graphics 4000 - VRAM: 1024 MB
Audio Plug-ins:
BluetoothAudioPlugIn: Version: 1.0 - SDK 10.9
AirPlay: Version: 1.9 - SDK 10.9
AppleAVBAudio: Version: 2.0.0 - SDK 10.9
iSightAudio: Version: 7.7.3 - SDK 10.9
System Software:
OS X 10.9.1 (13B42) - Uptime: 0 days 0:20:26
Disk Information:
APPLE HDD ST500LM012 disk0 : (500.11 GB)
EFI (disk0s1) <not mounted>: 209.7 MB
Macintosh HD (disk0s2) /: 499.25 GB (469.68 GB free)
Recovery HD (disk0s3) <not mounted>: 650 MB
HL-DT-ST DVDRW GS41N
USB Information:
Apple Inc. BRCM20702 Hub
Apple Inc. Bluetooth USB Host Controller
Apple Computer, Inc. IR Receiver
Apple Inc. Apple Internal Keyboard / Trackpad
Apple Inc. FaceTime HD Camera (Built-in)
FireWire Information:
Thunderbolt Information:
Apple Inc. thunderbolt_bus
Kernel Extensions:
Problem System Launch Daemons:
Problem System Launch Agents:
Launch Daemons:
[loaded] com.adobe.fpsaud.plist
[loaded] com.microsoft.office.licensing.helper.plist
Launch Agents:
User Launch Agents:
User Login Items:
iTunesHelper
3rd Party Preference Panes:
Flash Player
Internet Plug-ins::
SharePointBrowserPlugin: Version: 14.0.0
FlashPlayer-10.6: Version: 11.9.900.170 - SDK 10.6
Flash Player: Version: 11.9.900.170 - SDK 10.6
QuickTime Plugin: Version: 7.7.3
Silverlight: Version: 5.1.20913.0 - SDK 10.6
Default Browser: Version: 537 - SDK 10.9
Bad Fonts:
None
Old applications:
SLLauncher: Version: 1.0 - SDK 10.5
/Library/Application Support/Microsoft/Silverlight/OutOfBrowser/SLLauncher.app
Time Machine:
Time Machine not configured!
Top Processes by CPU:
3% WindowServer
1% EtreCheck
0% firefox
0% hidd
0% coreservicesd
Top Processes by Memory:
303 MB firefox
57 MB mds_stores
41 MB Finder
33 MB Dock
33 MB WindowServer
Virtual Memory Statistics:
5.80 GB Free RAM
1.16 GB Active RAM
223 MB Inactive RAM
844 MB Wired RAM
206 MB Page-ins
0 B Page-outsThe warranty entitles you to complimentary phone support for the first 90 days of ownership.
If you bought the product in the U.S. directly from Apple (not from a reseller), you have 14 days from the date of delivery in which to exchange or return it for a refund. In other countries, the return policy may be different. If you bought from a reseller, its return policy applies. -
I own a 13-inch MacBook Pro and for the past day, my wifi on my laptop says I only have two bars of connection and is running very slow,but all of my other devices such as my iPhone and iPad are connecting perfectly to the wifi. How can I fix this? I have tried to shut my laptop off and let it rest and I have also re-started my wifi router three different times. Someone please help me with this problem so I can begin to use my laptop again as I take it to school and use it for class.
Thanks so much!FCP, and all software on OSX, has a few different "preference" files (the extension is .plist), which store all your user settings. Each time you resize a window, change a setting, anything, this file is re-written. Kinda easy to see how they would become corrupt every now and then.
-Close FCP
-Navigate to User>Library>Preferences and delete com.apple.FinalCutPro.plist
-Navigate to User>Library>Preferences>Final Cut Pro User Data and delete Final Cut Pro 5.0 Prefs
-Empty your trash
Relaunch FCP and see if that worked.
Download FCP Rescue to make this process easier in the future. When you have FCP running really smooth, open FCP Rescue and create a backup of your preference files. If it starts acting wanky, just run FCP Rescue and Restore your backup preferences. Works really slick, and it's free.
EDIT: Or use the really simple explaination that X posted as I was typing. -
I was planning on buying a new 13 inch MacBook Pro with 512 GB memory and 8GB RAM. The main purpose for this purchase Is to be able to run Final Cut Pro anywhere I want to. Should I upgrade to 16 GB of RAM with the added expense and wait time or is that overkill?
8GB should be plenty . . . though as with most things in life, it all depends on exactly what you are doing. If you intend to edit long, highly complex projects loaded with effects and multicam clips you can't get enough RAM.
For over 3 years, I and many others, have been using 4GB with no problems. -
I have the Apple MacBook Pro MC723LL/A and I need a new battery.
Which one would I buy? Thanks
No, that one is for the pre-unibody MBPs models "early 2008" and older that had user-removeable batteries (and silver keyboards). Won't work in the newer "black keys" models like yours.
If anything, it's this one:
http://store.apple.com/us/product/MB772LL/A/rechargeable-battery-15-inch-macbook -pro-aluminum?fnode=5a
However, the advert does not make it clear if it its limited to only certain mdles of 15-inch MBPs.
Best advice is in Leroy's post--take it to Apple and let then figure out which battery you need.
NOTE: Don't put too much faith in the negative reviews in the Store. When people post here that their battery failed prematirely, about 90 percent of the time their complaint includes. "I don't understand. I never use the computer on battery!"
These batteries will die young if not used. I try to run mine on battery once or twice a week. -
I have an early 2008 and mid 2010 13 inch macbook pro running iTunes 10.7. Itunes on both machines doesn't recognize blank cds or allow me to import from a music cd when I insert it.
iTunes does not use the .xml it uses the .itl
If you are sure your old library file migrated across (does the file size and modification dates suggest it has?) start iTunes while holding down the option/alt key and guide it to the .itl file to get it to use that one. -
I am new to iMovies. When I make a video using the mic and camera in my Macbook Pro, the audio and video are not in synch. Very annoying. How can I fix this?
DVD drives read the bottom of the disk, not the top. Smooth out the paper & try again.
-
Windows 7 install and/or environment freezing on new 13" MacBook Pro
Hello! Long post, trying to give as much detail as I can... thank you in advance for your help on this!!
I think I posted in the incorrect forum earlier -- reposting here where it's more relevant.
I have a frustrating issue I've been battling all weekend. I can't seem to figure it out.
I'm trying to set up dual boot (Boot Camp) on my new 13" MacBook Pro, installing Windows 7. I've tried x64 (preferable) and x86. This is the mid-April 2010 13" MacBook Pro. C2D 2.4GHz, 4GB RAM, 250GB HD, nVidia 320M.
The problem I'm having is the machine is hard-locking. Sometimes it locks up during install (the 2nd phase, after it restarts and is "Completing Installation" (this step: http://spsexton.files.wordpress.com/2008/11/install-13.jpg). This makes me have to restart the installation completely, which is frustrating. Sometimes it locks up at the login screen. Sometimes it locks up once I'm logged in to Windows.
I have noticed that if the installation completes and I can get to the desktop, I can generally use it OK until I install the Boot Camp Drivers (3.1, from the 10.6.3 install DVD). I had a hunch and had also read that it may have to do with the nVidia drivers it installs, so I have tried uninstalling those prior to restart. It locks up anyway at restart (during login). Note that this generally is the case -- sometimes it locks up before I even get to the Boot Camp Drivers step. I sometimes can then get in to Safe Mode without it locking (sometimes it does, sometimes it doesn't), and I think I had some repeated errors in the Event Viewer that appeared erroneous (certainly not errors that should cause a hard lock) -- I can post these if needed when I get home from work this evening.
I was having consistent lockups during installation (at the "Completing Installation" step I mentioned above) when I'd let the Boot Camp Assistant set up the partition for me. I thought BCA might be doing something funny, so I set up the partition myself using Disk Utility then installed, and the install went in OK, however I still had it lock up after installing the Boot Camp Drivers.
Here's the steps I've been following:
1. Partition drive, either using Boot Camp Assistant or Disk Utility. Format to FAT if using Disk Utility.
2. Boot into Windows installer
3. Format drive to NTFS in installer
4. Install
5. Reboot
6. Complete install (often locks here as mentioned above)
7. If install completes, boot in to Windows
8. Change some system settings -- temp folders, workgroup name, pagefile size, turn off UAC
9. Reboot
10. Install Boot Camp Drivers from DVD (sometimes locks before I get here)
11. (have tried sometimes) Uninstall nVidia drivers installed by Boot Camp
12. Reboot
13. Consistent locks
14. Start over, both trying a new Partition creation (delete old, expand Mac partition, recreate new partition via BCA or DU), or using existing partition
Some other details:
1. This environment seems to work fine via Parallels. I only appear to have locking issues if I try to boot natively.
2. The Boot Camp Drivers installs a bunch of driver crud for devices the machine does not have. Could this be causing an issue? Drivers that Windows is attempting to load and failing, thus causing issues?
3. I'm mainly trying to install x64 due to the 4GB of RAM -- could this be an issue with the Boot Camp Drivers and Windows x64?
4. I don't think this is a motherboard issue as the machine is completely stable otherwise -- I'd think that if it was a hardware failure, especially with the motherboard, I'd see other issues elsewhere..
Any ideas??? I'm pulling my hair out on this one. The machine is brand new (just got it Tuesday last week, just started using it this last weekend). My last MacBook Pro (previous model 13" MBP) took Windows 7 without a single hitch and ran smooth as butter.
Help?i just got some solution for this... dunno whether it will work for u all... anyone who got the same problem... try to press power button right on welcome screen after u type ur username and password.... or if u didnt put a password, u can press the power button right on the welcome screen... and then it will automatically to the lock state... and then u login again... the windows will appear... i work it on windows 7 64 bit... if u can login for that 1st time, for next time, u dont need to press the power button anymore... for me it works... XD
cheers...
gud luck for u all... =)
Message was edited by: conggg -
I got a new Macbook pro in March and transferred all of my old files into the new macbook from my old one. But ever since then, my iPhoto just does not open up. It says 'error' every time I try to open it, but I am still able to attach the iPhotos saved to emails. Help! How do I get my iPhoto back?
Thanks, Sig.
The old computer is a 2.6 Ghz Intel Core 2 Duo
The new one is a 2.3 GHz intel core i7
In going over this, thanks to "tallking it out" with you, I did discover the Text Edit problem. Because I've still been unable to get the new computer text size (fonts or whatever) to match the old computer, I did not notice that the curser is now different--the line midway down the curser has to be placed on the line I am working upon, otherwise the edits go elsewhere on the page. Now, with a bit of difficulty, I am able to get Text Edit to work correctly.
If you have any ideas as to why my menu bar and Text Edit type are still so slow, I'd love to have them.
(I went through the process you suggested earlier, re my Trackpad preferences, and found no improvement.) -
I got a new laptop (Macbook Pro) and my IPhone is synced with my previous laptop (which I no longer have). I've recorded dozens of very long (un-emailable) Voice Memos over the last few weeks and need to get them from my IPhone onto my new laptop.
How do I do this?
(when I click on the Sync option I get the warning: "Are you sure you want to sync music? All existing songs and playlists on the iPhone will be replaced with songs and playlists from your iTunes library." I fear that if I click this I will lose all of my important Voice Memos as well)Just to add to what ChrisJ4203 said. You can sync them to your new computer using iTunes by selecting to Include Voice Memos on the Music tab of your iTunes sync settings and syncing. However, you still need to re-establish syncing with the new computer without iTunes erasing all the iTunes media from your phone (as the warning mentioned).
If you copy your entire iTunes folder (not just your music) from your old computer to your new one, along with other non-iTunes media you may be syncing with iTunes (such as contacts, calendars and any photos synced to your phone from your old computer) by using migration assistant of following one of these methods: http://support.apple.com/kb/HT4527, then when you sync again with your new computer it will recognize your phone and sync as it did before. You will still have to authorize the new computer for any Apple IDs used to purchase from the iTunes and App stores (in iTunes>Store>Authorize this computer).
After that you can sync your voice memos to your computer as mentioned earlier.
If you want to archive your voice memos before you do anything with iTunes, you can use a 3rd party program such as PhoneView or Touch Copy. -
I have a new apple MacBook Pro. All my music is on my old computer and my i-pad. What is the easiest way to transfer my music onto my new
computer?apps
If you have an iPod touch or iPhone with iOS 4 or later software, or an iPad, you can use iTunes to transfer files between your computer and an app on your device that supports file sharing.
You might want to do this if, for example, you want to save files you create on your device to your computer, or take files with you so you can use them when you’re away from your computer.
You don’t need to sync your device to transfer files, but your device needs to be connected to your computer.
For information about supported apps, see the documentation for your apps.
Hide
To transfer files from your iPod touch, iPhone, or iPad to your computer:
Connect your iPod touch, iPhone, or iPad to your computer.
In iTunes, select your device (below Devices), and click the Apps button.
Below File Sharing, from the list on the left, select the app on your device that you want to transfer a file from.
From the list on the right, select the file you want to transfer, and click “Save to.”
In the window that appears, select the destination where you want to save the file, and click Choose.
The file is saved to the selected destination on your computer.
SImport music and video already on your computer
If you have audio or video files on your computer, you can import them into iTunes so that they appear in your iTunes library.
Hide
Here are ways to add items from your computer to your iTunes library:
Drag a file or folder from the Finder to the iTunes window.
If you add a folder, all the files it contains are added to your library.
In iTunes, choose File > “Add to Library,” locate a file or folder, and then click Choose.
By default, iTunes places a copy of each audio file in the iTunes folder (Home/Music); the original file remains in the current location. For information about adding an alias to the file (instead of creating a copy), see Add items to your library without copying them to your iTunes folder.
Maybe you are looking for
-
Need Greek language on oracle report
Hi, I digged up a lot of stuff on how to get a report to be displayed in diffrent languages. I tried a lot of stuff, change font setting to Greek in Oracle Report Builder , still this doesn't show greek characters , for example, έγγραφο μεταφοράς (Th
-
Centralized purchase organization
Dear All, we have the scenario that one centralized purchase orgnaization is there which is responsible for the negotiation with vendor so after negotiation with vendor they will create the contract and this can be used by other purchase orgnizatio
-
How to make constraints on the size of any file
If I have a file in which data is written which leads to the increase of this file size Is it possible to make a constraint such that this file size mustn't exceed certain size let say 5 MB for instance :) Thanks in advance
-
How to enable create folder Icon
Hi, When I am using the setSaveDialog() method of JFileChooser to select the location, the default directory which appears if no argument is passed is "My Documents". In Windows XP professional edition the create folder icon in this dialog gets disab
-
Video Sidecar Files (.THM) Not Created When Video Exported As Original - They should be.
When exporting video as in it's original format the .THM sidecar file (which contains all the relavent metadata for the video) should be included so that other programs (or even Lightroom itself if using the Add to This Catalog option during export)