Need to add 2 properties to DisplayObject

I am building a mapping application (think google maps) and
want to be able to add a latitude,longitude to any DisplayObject
(or subclass) so I can still use all the built-in AddChild,
RemoveChild, etc. methods. I was thinking I could just extend
DisplayObject to GeoDisplayObject and add the custom properties and
methods, but then I can't cast any of DisplayObjects subclasses to
a GeoDisplayObject.
Any Ideas?

Hello,
Either you could copy the existing report for MB51 - RM07DOCS into a Z report and add these two fields depending on where these columns are required (header or item level - as the output is a hierarchial alv report) in the corresponding tables defined in the program HEADER or ITEM. populate the respective data in the internal tables and add these fields in the corresponding field catalogs.
As you are using ECC 6.0, you can also check if an implicit enhancement is available. You will have to add these fileds in the internal tables HEADER or ITEM, these fields will also be added in the corresponding field catalogs and a point where the logic to add data into the internal tables.
These values passed to the ALV will display the new columns.
Thanks and Regards,
Sachin

Similar Messages

  • Need to add additional properties to a message

    Hello Friends,
    I need to obtain a JMS message and add properties to that message. Any message I receive is marked as read only. Hence I get a MessageNotWritableException when I try to set a property in that message. I have to call the clearProperties method but that will clear all the existing properties in the message. I would like to create a copy of this message and then add properties to it. Is there a way to this?

    Copy the properties into a HashMap, clear them, set the message payload, put the properties back

  • Need to add a new field to the Schema for MDM Syndicator

    We are running MDM 5.5 SP6.
    We have a requirement to add a new field and syndicate the new field to the our Procurement System.
    I was able to add the new field to the repository and schema in SAP MDM Console.  However, when I went into the Syndicator to map the new field (which I do see) to the new Schema field, I don't see the new field to map in the Schema.
    How can I change the existing syndication jobs (11 of them) to use the new Schema?  Or do I have to recreate all of them?
    Thank you in advance!!!

    Hi Janynne,
    I hope you have modify the Syndication XSD(add new field) and then load it in XML Schema table of MDM Console, right ?
    If you have done it, now open MDM Syndicator>Go to File>Open, select the required Remote system and Available map.
    Now your existing map will be loaded which has not the required added field, Now again, go to file-->Export.
    Give file name and save this syndication map on your Desktop. Once you have done this.
    Go to File>New>Select respective remote system and Type as XML Schema if you have loaded this XSD in Console else select Type as XML Schema file and select the modified XSD (added new field XSD) from Desktop. Once it is loaded, import the existing syndication map(which you have exported as said above) which should have all the fields mapped, now in target side you will have here new added field too, map it with required source field in Item Mapping and then go to file>Save as>select the required Remote system and give new map name. Use this map for exporting files for future reference.
    Also, if your are using Port Concept, you need to change the Properties Map and XML Schema in Port of MDM Console.
    Regards,
    Mandeep Saini

  • How do you add/make properties to layers/timeline without shortcuts?

    How do you add scale, position etc to a layer on the timeline without using shortcut keys?
    I used the tools to scale and whatnot, and know you can use shortcuts but is there a menu where you can add those properties and make them show up in the timeline?

    I'm not sure that I understand your question.
    Every layer has a Position property and a Scale property. You don't need to add them.
    If you're asking about how to _show_ the properties, then it's just a matter of clicking the triangle next to the layer name in the Timeline panel and then clicking the triangle next to the name of the property group. (The Position and Scale properties are in the Transform property group.)
    See this page: "Layer properties in the Timeline panel"
    Since you're new to After Effects, I strongly recommend that you start here:
    http://blogs.adobe.com/toddkopriva/2010/01/getting-started-with-after-eff.html

  • Need to add a link to the masthead area of the Portal

    Hi
    I need to add a link to the masthead area of the portal. That link needs to be able to print the content of the current page.
    Ihave downloaded the com.sap.portal.navigation.masthead into the NWDS.
    Can anybody please let me know where exactly to modify the code.
    i am guessing i may need to use window.print() to print the page.
    Thanks
    Sharath
    Thanks
    Sharath

    Step 1: Adding new link in the masthead
    1. Rename the par file to your own namespace and import the PAR using eclipse
    2. To add your link - modify HeaderiView.jsp appropriately
    3. Build the PAR and export using Eclipse
    Step 2: Create an iView
    1. Content Administrator -> Portal Content -> Select the folder in which you need to create the masthead iView. Right click on the selected folder and "Select New From PAR" -> iView
    2. Select the PAR file name created by you in Step 1 a
    3. Choose "default" in Portal Component Selection
    4. Provide the properties for the iView and save
    Step 3: Modify Portal Masthead
    1. Add the iView created in Step 2 to the Framework Page of your application
    2. Remove the existing Masthead iView from the framework page and add iView created in Step 2 in the framework page.
    3. Note that the position should be the same where the previous masthead is removed.
    Logoff and logon with the user who is assigned the framework page - you should be able to see the new masthead with links
    Incase you are changing the default framework page and default masthead ensure that you have a backup so that you can revert.

  • Captivate 4 - I need to add a Email Button that reads Submit

    I looked in the Help feature for Captivate 4 and couldn't find my answer.
    So my predecessor put a button on the quiz results page that would allow people to submit their quiz results to the LMS. I am unable to recreate this button. When I look at the button on projects she created, it is showing as an "email button". I have no clue how to add an "email button". I also can't copy/paste the button from one project to another. Nor can I copy/paste the slide from one project to another.
    Anyone have a clue how I add a "email button" from scratch?
    Here is a screen shot that partially shows the quiz results page, and the properties window for the button. THANK YOU for all the help!!!!!

    Hi Rick, thanks for the response. I appreciate it!
    So the issue isn't what the buttons are doing on the actual quiz slides, it's needing to add an Email button on the slide that gives the final scoring information (the reporting slide?). The screen shot you have shown me, isn't that the submit button on the quiz slides, not the final scoring slide?
    As you can see here, I have the Submit button on quiz slides:
    When I look at the properties of this Submit button, it shows as a Text button, not an Email button like the Submit button on the reporting slide is.
    Now I know you are probably thinking I should just click the drop down and select "email", but that selection is not there:
    Here are screen shots of my Quiz preferences and Reporting preferences:
    What I need to create is a Submit button on the reporting slide for the quiz that is an Email button. Like this one:
    When I look at the properties of this Submit button, it is an Email button. Notice how the tab says "Email Button" and not "Submit button" like the other properties windows for the other "Submit" buttons.
    This is where I'm stuck. When I go to Captivate projects that have a reporting page with a Submit button, I can't copy/paste the button. I tried to do a right click and I don't have a copy option:
    When I higlight Submit and go to Edit, I don't see the option to copy the button there either.
    So I figured I would copy the slide to the presentation that needs this Submit/Email button and I can't copy/paste the slide either. When I do a right click on the slide, there isn't a copy option:
    When I go to to Edit to try to copy the slide, the option isn't there either:
    I am really thinking that the Submit button the final reporting slide for the quiz is a Widget of some sort. Hum.
    Thanks! Karen

  • What Software Do I need to add Chapter Markers

    I've got a 55 min QuickTime movie file that I'd like to simply add Chapter Makers as well as setup a Chapter Menu selection at that beginning.
    Also, I'd like to be able to render this file to a format that will playback on any DVD player.
    To be able to edit/sweeten the audio and/or video is not a priority....I'd just need to add chapters so to divide up this one-long-movie into...well...chapters.
    What software do I need that will do this?
    Thanks.
    Mac 17" MacBook Pro
    Mac OSX 10.4.10
    Processor: 2.16 Ghz Intel Core Duo
    Memory: 2 GB 667 Mhz DDR2 SDRAM

    You can add chapter markers using Quicktime Pro if you don't need to edit the movie.
    You can find detailed instructions in the Apple document Chapter Tracks.
    These instructions teach how to add a chapter track, containing your chapter titles and timecodes, to an existing quicktime movie without using iMovie or FCE or other editing software. No codec, compression, or conversion is applied to your video and audio, which are left alone. Only a new text track with adequate formatting is added.
    A few additional notes:
    - you need Quicktime Pro (30$)
    - you must correct a couple of points in the Apple instructions:
    a. in step 3. you have first to +enable the text track+ in the Property Window of the movie, and then you can use the Text to Text option in the Export Menu (otherwise no Text to Text option is made available).
    b. step 10 must be corrected as follow: +"Open Show Movie Properties from the Window menu, choose the *Video Track* ( not: new text track). Choose Other Settings then choose your Text track in the Chapters popup"+
    Piero

  • Add custom properties...Please help

    Hello,
    I would appreciate if you please let me know how can I add custom properties to documents such that they are available to all the documents, which are added to a particular datasource/repository.
    I added one custom property to one document but this new property was not available to other documents.
    I also read help pages but am unable to find my problem.
    Please help as I need to report this to my senior asap.
    Awaiting Reply.
    Thanks and Warm Regards,
    Ritu

    Hi,
    this is not possible.
    The admin has to predefine attributes for documents, which should be available to all users within a
    particular repository or folder.
    The custom properties are only for one document and for one user.
    Kind regards,
    Rebecca Ott

  • Need to add arial unicode MS option

    I need to add Arial Unicode MS to my console option in essbase version 11 to see unicode characters. Can anyone tell me how to do this??

    Hi there, not sure if this helps... but here goes. To set up your cube for unicode, you have to enable your server to have "Permission to create unicode-mode applications".
    Right click on your server in EAS, then choose -> Edit -> Properties -> Security -> Permission to create Unicode-mode applications.
    After that, you can set any application to be in unicode.
    To do that, right click your application, then choose -> Edit Properties -> General -> Unicode Mode.
    Then I think in order to see the unicode members in excel, I think you need to install the language you want to see using Windows.
    I've still got to look into that more... Anyway, hope that helps.

  • I need to add bpm to my songs but in some of them i just can't add/modify any info. it seems like it happens only with the verified songs (the ones i download from souncloud work for example) probably verified trough gracenote..is there anything i can do?

    i need to add bpm to my songs but in some of them i just can't add/modify any info. it seems like it happens only with the verified songs (the ones i download from souncloud work for example) probably verified trough gracenote..is there anything i can do?
    this is what happens when i try to add/modify the infos and it doesn't work, i'm even unable to click in the spaces
    thanks for your attention,sorry for the bad english

    Right-click on your main iTunes folder and click Properties, then go to the Security tab and click Advanced. If necessary grant your account and system full control to this folder, subfolders and files, then tick the option to replace permissions on child objects which will repair permissions throughout the library. This is the XP dialog but Windows 7 shouldn't be too different.
    tt2

  • [svn] 4073: Add IViewport properties to FxContainer and FxDataContainer.

    Revision: 4073
    Author: [email protected]
    Date: 2008-11-11 14:09:40 -0800 (Tue, 11 Nov 2008)
    Log Message:
    Add IViewport properties to FxContainer and FxDataContainer. This is using a new property delegation pattern. This pattern may be refined later on. For part of it, we are doing bit manipulation to store a set of booleans efficiently. I removed the Flags32 class and replaced it with static helpers because it's more efficient without the object overhead. So I cleaned up Button and ToggleButton to use the new static helper class.
    Ran checkintests and mustella tests for: List, FxContainer, FxDataContainer, Button, ToggleButton, CheckBox, RadioButton.
    QE Notes: Need to test these new properties (how they facade, setting them explicitly, what happens when skins changed, bindability of these properties, etc...)
    Doc Notes: None
    Bugs: -
    Reviewer: Hans, Evtim
    Modified Paths:
    flex/sdk/trunk/frameworks/projects/flex4/src/mx/components/FxButton.as
    flex/sdk/trunk/frameworks/projects/flex4/src/mx/components/FxContainer.as
    flex/sdk/trunk/frameworks/projects/flex4/src/mx/components/FxDataContainer.as
    flex/sdk/trunk/frameworks/projects/flex4/src/mx/components/FxToggleButton.as
    flex/sdk/trunk/frameworks/projects/framework/src/FrameworkClasses.as
    Added Paths:
    flex/sdk/trunk/frameworks/projects/framework/src/mx/utils/BitFlagUtil.as
    Removed Paths:
    flex/sdk/trunk/frameworks/projects/flex4/src/mx/utils/Flags32.as

    Thats good news.

  • Need to add $ symbol in the amount column

    Hi All,
    i need to add a $ symbol in one of the value column in my SSRS Report.(SSRS 2008 R2).
    But , the problem is $ should be Left Aligned and Value should be
    right aligned.  If the value is zero then also $ has to display as most left aligned as below "$                0".
    Can any one suggest me to get it done.
    Thanks n advance.
    bala krishna

    Hi balakrishna141,
    Based on your description, you want to add a “$” together with the Amount in one textbox, The”$” align to the most left of the textbox and the Amount align to the most right of the textbox, right?
    I have tested on my local environment and find there is some limitation of using the HTML and as you mentioned that the solution provided by Visakh16 have some little problem, so ,we can use another method by creating an rectangle(The rectangle should be
    the same size as the cell of the table) and put two textboxes (TextBox1 to put the value of “$”,TextBox2 to put the value of Amount) in it and replace the [Amount] TextBox with this rectangle, then set the properties of both TextBox(TextBox1:TextAlign=Left,
    TextBox2:TextAlign=right)
    Details steps below for your reference:
    Create an rectangle and place 2 textboxes inside a rectangle
    In the first text, put the $ and right align it
    In the second textbox, put the value of amount and left align it
    Make sure that the width of the first textbox1 is less as it just has to accommodate the $ symbol and give more width for the second textbox2 of amount
    Similar thread are for your reference:
    https://social.msdn.microsoft.com/Forums/sqlserver/en-US/66d91599-d186-46f2-be03-5278612e6c91/right-align-dollar-sign-with-left-justified-number-in-ssrs-2005-matrix-report-column-?forum=sqlreportingservices
    If you still have any question, please feel free to ask.
    Regards
    Vicky Liu

  • Do I need to add Base Station MAC address to list?

    Hi, If I choose to use MAC address filtering on my Airport Extreme Time Capsule, do I need to add the wireless MAC address of the Base Station to the list of allowed MAC addresses???  I'd feel real bad if I set up a list, didn't include the base station's MAC address and then could never get in to the network again because I, in effect, locked myself out???  I doubt that address needs to be included but I would like some feedback on that.
    Second, does the one MAC address filter list apply to the Guest Network as well if I should choose to turn it on???  If that was the case, I would just turn off MAC address filtering why guests were present.
    thanks..  bob

    If I choose to use MAC address filtering on my Airport Extreme Time Capsule, do I need to add the wireless MAC address of the Base Station to the list of allowed MAC addresses???
    No. Timed Access would be for wireless devices....computers, mobile devices, printer, etc., that are connecting to the Time Capsule. The Time Capsule does not connect to itself in this regard.
    I'd feel real bad if I set up a list, didn't include the base station's MAC address and then could never get in to the network again because I, in effect, locked myself out???
    Sometimes, users lock themselves out by mistake by entering incorrect times for devices to connect, and they often forget that they can connect to the base station using an Ethernet connection and get back in that way.....since Timed Access only applies to devices that connect using wireless.
    does the one MAC address filter list apply to the Guest Network as well if I should choose to turn it on???
    Yes

  • VA01 Sales order - Header-- Accounting tab need to add a field

    Dear All,
    The requirement is,
    1. I need to add a field in Sales order.
    Path for the same is as follows:
    VA01> Goto> Header--> Accounting tab
    2. The field will be a date field that needs to calculate date on.
    a)create a new field. ex - zchdt (chq due date)
    b)when customers enters value in Assignment,
    i.e vbak-zuonr
    after that trigger logic is
    3.vabk-kunnr = knvv-kunnr
    a)sy-date + knvv-kvgr2 (exclude sundays)
    example - 14 sept + 30 days = 14th october
    should populate value - 14th october i.e. field (zchdt)
    4. This activity needs to be triggered before the sales order is saved.
    kindly know whether this is possible or not.
    if possible how & which exit & also with example code.
    if you could give me your contact(cell no).
    Regards,
    Nagendra D.S.
    Mobile - +91 9819899082

    Hi All,
    VA01 Sales order - Header--> Accounting tab need to add a field. field name - zchdt(cheque due date)
    when customer enters value in Assignment i.e zuonr & after that trigger logic is
       1.     vbak-kunnr = knvv-kunnr
       2.     sysdat + knvv-kvgr2 (exclude sundays)
    example - 16 sept + 30days = 16 oct
    in field zchdt value 16 oct as to populate
    Pls help me in the code.
    Regards
    Nagendra

  • Need to add number of days to users end date.

    Hi,
    I have a code where we are adding number of days(30) to current date and then updating user's end date in IDM DB.
    Now we have a requirement where we need to add number of days(30) to existing end date of user instead of adding to current date.
    *public String incrementDate(int daysToAdd)
         // Start date
         log.info("NotifyLastDayOfService::incrementDate(): Enter");
         SimpleDateFormat sdf = new SimpleDateFormat("yyyy-MM-dd 00:00:00");
         Calendar c = Calendar.getInstance();
         c.add(Calendar.DATE, daysToAdd); // number of days to add
         String newDate = sdf.format(c.getTime());
         log.info("NotifyLastDayOfService::incrementDate(): Exit");
         return newDate;
    Have any body implemented this scenario?
    Please suggest.
    Thanks,
    Kalpana.

    Hi Nayan,
    Here is the code:
    System.out.println("----inside increment date method-----");     
              HashMap<String, String> hm = new HashMap<String, String>();
              HashMap<String,Date> modifyMap=new HashMap<String,Date>();
              SimpleDateFormat sdf = new SimpleDateFormat("yyyy-MM-dd 00:00:00");
              tcResultSet usrList = null;
         String enddate = null;
         hm.put("Users.Key",usrKey );
         try {
         usrList = this.usrIntf.findUsers(hm);
         usrList.goToRow(0);
         Date endDate =usrList.getDate("Users.End Date");
         System.out.println("-----users end date-----"+endDate);
         String userEndDate=sdf.format(endDate);
         System.out.println("-----String value of users end date-----"+userEndDate);
         Calendar cal=null;
         System.out.println("-----Calender date-----"+cal);
         cal.setTime(endDate);
         System.out.println("-----end date-----"+endDate);
    cal.add(Calendar.DATE, Integer.parseInt(daysToAdd)); // number of days to add
    Date newEnddate = cal.getTime();
    System.out.println("-----new end date-----"+newEnddate);
    //usrList.setEndDate(Edate);
    modifyMap.put(userEndDate,newEnddate);
    usrIntf.updateUser(usrList, modifyMap);
    System.out.println("updated user's end date in OIM DB");
    //System.out.println("-----updated user's end date in OIM DB-----");
    logger.info("NotifyLastDayOfService::incrementDate(): Exit");
         System.out.println("-----new date-----");
         } catch (tcAPIException e) {
         logger.error("Error in finding end date for user" + e);
         } catch (tcColumnNotFoundException e) {
         logger.error("Error in finding end date for user" + e);
    In th log file, I can see that the code is not executing this line:
    cal.setTime(endDate);
    end date is of type Date and stores users end date from DB. Please help in resolving this issue.
    Thakns,
    Kalpana.

Maybe you are looking for