Non-asm to asm restore using duplicate

oracle version 11.2.0.2.0
hello guys a quick question, I am trying to restore a database from non-asm to asm. I want to know if the following will work with the duplicate database.
SET NEWNAME for DATAFILE '/clu15/oracle/database/PROD/dbf/NDX_PROD.dbf' to '+DGDEV1DBDATA03/database/DEV/dbf/NDX_PROD.dbf';
SET NEWNAME for DATAFILE '/clu15/oracle/database/PROD/dbf/NDX_PROD_01.dbf' to '+DGDEV1DBDATA03/database/DEV/dbf/NDX_PROD_01.dbf';
SET NEWNAME for DATAFILE '/clu15/oracle/database/PROD/dbf/NDX_PROD_02.dbf' to '+DGDEV1DBDATA03/database/DEV/dbf/NDX_PROD_02.dbf';
SET NEWNAME for DATAFILE '/clu15/oracle/database/PROD/dbf/NDX_PROD_03.dbf' to '+DGDEV1DBDATA03/database/DEV/dbf/NDX_PROD_03.dbf';
Thank You

This above will work.
If you want to use OFA architecture, you can just give
SET NEWNAME for DATAFILE '/clu15/oracle/database/PROD/dbf/NDX_PROD.dbf' to '+DGDEV1DBDATA03';
You can also set the parameter db_file_name_convert and log_file_name_convert.

Similar Messages

Moving spfile from non-asm to asm file system

Hi All
We are migrating non-asm file system to asm file system, we are held up in moving the spfile from non-asm file system to asm file system ...
we tried the below method
Recreate SPFILE on ASM diskgroup
SQL> create pfile='c:\initTEST.ora' from spfile;
File created.
SQL> create spfile='+DGRP2/spfileTEST.ora' from pfile='c:\initTEST.ora';
File created.
after this we started both the running instance and asm instance
but after starting the instance TEST we saw the instance still using spfile of non-asm file system
what is the correct way of moving the spfile from non-asm to asm file system..
Regards
Hariharan.T

You need to perform this first:
First rename the $ORACLE_HOME/dbs/spfileTEST.ora to spfileTEST.ora_old
create initTEST.ora in dbs location with below contents:
Also i recommend you to recreate the spfile in ASM as it might not be in good shape.
When ever you start the oracle instance there is a specific order to find the oracle pfile/spfile
1. O_H/dbs/spfile<SID>.ora
2. O_H/dbs/init<SID>.ora
3. O_H/dbs/spfile.ora
4. O_H/dbs/init.ora
in your case instance always finds spfileTEST.ora in dbs location (non -ASM) and will stop looking further. If you remove it our of the way it will find initTEST.ora which will redirect to spfile present in ASM.
NOTE: As per your earlier update you created spfile in ASM after puttin spfile='+DG...' in the initTEST.ora..
If you start the instance with this SPFILE you will be getting "maxmimum cursors limit exceeded" error.
-Ravi.M

Oracle Documentation to Migrate RAC to NON-RAC keeping ASM

Oracle Documentation to Migrate RAC to NON-RAC keeping ASM.

93a5de6e-a834-4d99-8192-dbc40f606ffd wrote:
Oracle Documentation to Migrate RAC to NON-RAC keeping ASM.
Surely all you need to do is set CLUSTER_DATABASE=FALSE, and start the instance from a non-RAC Oracle home. Then tidy up the cluster registry: use the srvctl utility to remove the RAC database, and add a non-RAC database. All done in ten minutes.
John Watson
Oracle Certified Master DBA

Soft I/O error in ASM disk volume when using iostat commmand

Dear All,
We are having 2 node 11g rac/sun solaris 10/ASM storage, when we using iostat in node 2 getting soft I/O error keep on increasing.
s/w h/w trn tot device
*82 0 0 82 c4t600A0B80006766CD000003DF4B20A7FCd0*
s/w h/w trn tot device
0 0 0 0 md/d10
0 0 0 0 md/d11
0 0 0 0 md/d12
0 0 0 0 md/d20
0 0 0 0 md/d21
0 0 0 0 md/d22
0 0 0 0 md/d30
0 0 0 0 md/d31
0 0 0 0 md/d32
0 0 0 0 md/d40
0 0 0 0 md/d41
0 0 0 0 md/d42
0 0 0 0 md/d50
4 0 2 6 c0t0d0
0 0 0 0 c1t2d0
0 0 0 0 c1t0d0
0 0 0 0 c1t4d0
0 0 0 0 c1t1d0
2 0 0 2 c3t203200A0B86766CDd31
0 0 0 0 c4t600A0B80006766CD000003E14B20C891d0
40 0 0 40 c4t600A0B80006766CD000003DF4B20A7FCd0
0 0 0 0 c4t600A0B80006766CD000003DD4B20A57Fd0
0 0 0 0 c4t600A0B80006766CD000003C34B0D2D31d0
2 0 0 2 c4t600C0FF0000000000859635DB0097B00d0
2 0 0 2 c4t600C0FF000000000085963724A889B00d0
2 0 0 2 c4t600C0FF0000000000859635AFC5A7F02d0
2 0 0 2 c4t600C0FF0000000000859635AFC5A7F01d0
2 0 0 2 c4t600C0FF0000000000859635AFC5A7F00d0
2 0 0 2 c2t202200A0B86766CDd31
0 0 0 0 c4t600A0B80006766CD000052274FD0B057d0
1 0 0 1 c4t600C0FF0000000000859635DB0097B02d0
2 0 0 2 c4t600C0FF000000000085963565767D300d0
2 0 0 2 c4t600C0FF00000000008596326C5F42901d0
1 0 0 1 c4t600C0FF00000000008596326C5F42900d0
1 0 0 1 c2t203300A0B86766CDd31
0 0 0 0 proddb2.zakathouse.org:vold(pid672)
please advice me how to troubshoot and fix this error
Thanks & Regards

Hi,
I suggest to have a look at following script which is provided by oracle to monitor IO.
ASMIOSTAT Script to collect iostats for ASM disks [ID 437996.1]
Further this i have questions
1) Are you logged in asm sysasm? Make sure that you have proper rights
2) Did you check the liveness of asm instance? Make sure its up and functional also check the asm alert.log for awareness.
Hope this helps

How to create standby database by using duplicate

Dear all,
How to create standby database by using duplicate,is there some doc to read?

Hi;
You can use
Step-By-Step Guide To Create Physical Standby On Normal File System For ASM Primary using RMAN [ID 838828.1]
Creating Physical Standby using RMAN Duplicate Without Shutting down The Primary [ID 789370.1]
Also use goole, there are many blog-site-dogs mention that topic. From googling:
Creating a Standby Database with Recovery Manager
http://docs.oracle.com/cd/B19306_01/backup.102/b14191/rcmdupdb.htm
http://www.pythian.com/news/248/recipes-for-creating-a-managed-standby-with-rman/
http://docs.oracle.com/cd/B19306_01/server.102/b14239/rcmbackp.htm
Regard
Helios

RMAN Restore using RMAN COLD Backup!!

Hi All,
I Need to restore a database using rman cold backup taken a month back.
Can i use Duplicate database option until time/scn just like we do for hotbackup or is there any other procedure for cloning/refreshing the database using RMAN COLD BACKUP of source.
Thanks & Regards,
Pdev

This may be used to clone db
connect target sys/sys@<dba>
connect catalog rman/rman@<dba>
connect auxiliary sys/sys<new>
run {
set newname for datafile 1 to 'e:\oracle\oradata\giri\system01.dbf';
set newname for datafile 2 to 'e:\oracle\oradata\giri\undotbs01.dbf';
set newname for datafile 3 to 'e:\oracle\oradata\giri\users01.dbf';
set newname for datafile 4 to 'e:\oracle\oradata\giri\indx01.dbf';
set newname for datafile 5 to 'e:\oracle\oradata\giri\example01.dbf';
allocate auxiliary channel dupdb1 type disk;
set until sequence 2 thread 1;
duplicate target database to dupdb
logfile
GROUP 1 ('e:\oracle\oradata\giri\redo01.log') SIZE 100k REUSE,
GROUP 2 ('e:\oracle\oradata\giri\redo02.log') SIZE 100k REUSE;
Message was edited by:
Girishh

What is RID in non clustered index and its use

Hi All,
I need help regarding following articles on sql server
1) what is RID in non clustered index and its use.
2) What is Physical and virtual address space. Difference in 32 bit vs 64 bit Virtual address space
Regards
Rahul

Next time Please ask single question in a thread you will get better response.
1. RID is location of heap. When you create Non clustered index on heap and
lookup happens to get extra records RID is used to locate the records. RID is basically Row ID. This is basic definition for you. Please read
this Thread for more details
2. I have not heard of Physical address space. I Know Virtual address space( VAS)
VAS is simple terms is amount of memory( virtual ) 'visible' to a process, a process can be SQL Server process or windows process. It theoretically depends on architecture of Operating System. 32 bit OS will have maximum range of 4 G VAS, it's calculated
like a process ruining on 32 bit system can address max up to 2^32 locations ( which is equivalent to 4 G). Similarly for 64 bit max VAS will be 2^64 which is theoretically infinite. To make things feasible maximum VAS for 64 bit system is kept to 8 TB. Now
VAS acts as layer of abstraction an intermediate .Instead of all request directly mapping to physical memory it first maps to VAS and then mapped to physical memory so that it can manage request for memory in more coordinated fashion than allowing process
to do it ,if not it will soon cause memory crunch.Any process when created on windows will see virtual memory according to its VAS limit.
Please read
This Article for detailed information
Please mark this reply as answer if it solved your issue or vote as helpful if it helped so that other forum members can benefit from it
My Technet Wiki Article
MVP

I have a PowerBook G4 with a non-functioning monitor. It used to work with an external monitor, but I reinstalled the OS, which cleared the display preferences and now when I restart it won't detect the external monitor. How do I fix?

I have a PowerBook G4 with a non-functioning monitor. It used to work with an external monitor, but I reinstalled the OS, which cleared the display preferences and now when I restart it won't detect the external monitor. This means I can't use the computer anymore. How do I fix? I tried using the Command+F2 keyboard shortcut, but it doesnt' work. It's possible that since I reinstalled the OS, it still needs to be set up, so there's only a welcome screen (but since I can't see it I'm not sure).

There is no limit to the number of times you can re-install Office on the same computer.
You can activate by telephone:
The last paragraph is the relevant bit

Restoring using an external hard drive help

Ok so.. ive recnelty received my mac back from apple, after javing the hd replaced. To prevent the loss of all of my stuff i bought an external hd and used this as my time machine backup, so now its all on my external hard drive. The problem ive got is that ive got no idea how to restore my mac using the extermal hard drive so its like it was before it was sent off. ive been told one option is to launch my mac in recovery mode and choose to restore using. my external hard drive there. however i cant access recovery mode because i have a wireless keyboard, and the only wired keyboard i have is a windows one. also, to make matters worse, i cant use any discs because my optical drive is broken, so until i receive my extermal one, discs are also out. of the option.
any other ways to do it?
thanks!

RomeoVersace wrote:
http://support.apple.com/kb/HT4889?viewlocale=en_US
Try this, your going to be using a program called Migration Assistant to restore data from a different computer's Time Machine. Your computer is a different computer now because of the new Hard Drive, so instead of entirely recovering the Operating System, this will save time and data by allowing you to choose individually what you want to restore and what you don't want to.
Do not use Migration Assistant, instead you will use Setup Assistant (which starts automatically when you first start your Mac) if you already started you Mac and added a user then you will have to use MA, but you will need to remove a user afterwards.

My iPad 2 will not restore using iTunes. It keeps telling me - the iPad "iPad" could not be restored. An unknow error occurred (4) - I have tried every suggestion I could find so far. Any ideas as to what I can do?

My iPad 2 will not restore using iTunes. It just quit a week or two ago and showed that I had to connect to iTunes.
When I do the "restore and update" it does not complete the "verifying iPad restore with Apple" and then shows the following message:
The iPad "iPad" could not be restored. An unknown error occurred (40).
I have tried it a number of times. Also turned of anti-virus and firewall. Tried on different computers. All resulted in the same message. The iPad is only 2 1/2 years old, so I hope it can be fixed.
Does anyone have a solution?
KandAfromMO

Found this thread by searching the forum. I hope it helps.
https://discussions.apple.com/thread/5471311

I have copied my CDs into iTunes (currently running v11) to play on my iPod. I have now bought a non Apple mp3 player to use when I am out running. How can I copy the many tracks I want from iTunes onto the new player?

I have copied my CDs into iTunes (currently running v11) to play on my iPod. I have now bought a non Apple mp3 player to use when I am out running. How can I copy the many tracks I want from iTunes onto the new player?
Thanks

I tried Notpod but can't get it to work. Part of the problem, I suspect, is that I can't create a folder on my player (a SanDisk Clip+). I also can't do this in Windows Explorer. Whilst I can see the Clip+ in Explorer, the option to create a new folder isn't there.
The error mesag I get in Notpod is:
"Unhandled exception has occurred in your application. If you click Continue, the application will ignore this error and attempt to continue. If you click Quit the application will close immediately.
InvalidArgument=Value of '0' is not valid for 'SelctedIndex'. Parameter name: SelectedIndex"
Then, when I plug the Clip+ into a USB port, iTunes thinks it is my iPad - which is because, I guess, Notpod hasn't worked.
I can drag and drop files from the Music folder where my iTunes tracks are stored onto the Clip+ and they get converted but I'd rather synchronise a Playlist from iTunes if I can.
Thanks anyone who can help

TS2755 My wife and I both have iPhone 5s, I can't send text messages to non iPhone people that I use to but iPhone people I can, My wife can send text to non iPhone numbers. I have checked and we both have the same settings.

My wife and I both have iPhone 5s, I can't send text messages to non iPhone people that I use to but iPhone people I can, My wife can send text to non iPhone numbers. I have checked and we both have the same settings. Both of our phones are up to date 7.0.4.

The ability to see and send calendar invites is a function of the calendar you are subscribing to and who owns it. We need more information, like what calendar are you subscribing to? MS Exchange? Google? Mobile Me?

I used Duplicate Annihilator to isolate dups in iPhoto on my iMac. At the end it told me it had marked the word duplicate in the comments / description field. How do I find and delete the marked photos?

I used Duplicate Annihilator to isolate dups in iPhoto on my iMac. At the end of its search, it told me it had marked the word duplicate in the comments / description field. How do I find and delete the marked photos?

File -> New Smart Album
Description -> contains -> Duplicate
will find them.
Then the keystroke to delete depends on which version of iPhoto you have. All the keyboard shortcuts are under the Help menu.

How can I import a non-BC site into BC, using Dreamweaver CC, and then use it as one of my free sites?

I am trying to import one of my non-BC sites into BC, using Dreamweaver CC, and then use it as one of my free WebBasics sites.
When I try to create a new BC site in Dreamweaver CC, it creates a BC template site, and I have unsuccessfully tried to update the files on BC - it won't let me connect.
If I import the site from my portal, I don't get the option of a free site - when I try to upgrade, I get the credit card form asking for payment.
I feel like I'm running around in circles with one foot nailed to the floor.
Any tips?

Thank you for your quick reply and for clearing up my confusion. I'm exporting the first section now. I choose the smallest size, 3x4 but I'd prefer to go higher as this DVD was originally a VHS home movie. I'm wondering if after three conversions (VHS,->DVD->MPEG) the resolution will be so poor as to not support a larger size frame? If it can, what size should I select when I export?

Cannot use duplicate table name error in AMDP

Hi Experts,
I'm developing an application which has the following architecture
SAP UI5->Gateway->ABAP Managed DB procedures(AMDP)->HANA SP(Stored Procedure)
We are having a very peculiar problem where the gateway service works inconsistently for the same input data.
i.e If I execute the same service n number of times, I get the results successfully for say n-3 times but the other 3 times I get a "RFC Error :Error while executing Database procedure"
There is no change in the input data or DB table data during all the executions.
Running the stored procedure stand alone in HANA studio works all the time.
We tried executing the AMDP from SE24 and the same behavior occurred.
When trouble shooting we found that the exception occurs inside the AMDP when the call db procedure statement is executed.
Could you please advise what could be the possible reason for this any tuning parameter/unavailability of db connections?
Or could you please suggest some other troubleshooting mechanism by which we can zero in on the cause?
When I go in the debug mode I can see the exact error as
cannot use duplicate table name: [288] SAPXXX.ZCL_PLAN_MAINTENANCE=>GET_COMP_TYPE#stub#20140905055908: line 15 col 3 (at pos 492): cannot use duplicate table name exception:
where ZCL_PLAN_MAINTENANCE=>GET_COMP_TYPE is the AMDP class and method. SAPXXXis the schema.

I reported this to Adobe customer support on 11/29, and here is their response:
Wednesday, December 5, 2007 12:51:27 PM PST
Hello John,
Thank you for contacting Adobe® Web Support for assistance with Adobe
Photoshop Elements® 6.0.
I understand that images are deleted if you accidentally try to move
them to a folder that already includes a file of the same name.
Thank you for bringing this to our attention. I was able to replicate
this behavior as well. The best method to report errors of this nature
is using the following form on our website:
http://www.adobe.com/cfusion/mmform/index.cfm?name=wishform
I will report this to the product team through my channels. You may want to submit this issue through the web form as it goes directly to the product development team.
I hope this information helps to resolve your issue. If you require
further assistance with this issue, please update your web case with
complete details, including what steps you have applied and any error
messages you are receiving.
You may also call Technical Support at (800) 642-3623. We are available from 6:00 am to 5:00 pm Monday - Friday, Pacific Time.
Kind regards,
Alan C.
Adobe Web Support

Non-asm to asm restore using duplicate

Similar Messages

Maybe you are looking for