ORA-01762: vopdrv: view query block not in FROM ????

Hi All
any one aware of the error.
ORA-01762: vopdrv: view query block not in FROM
Please reply back.

ORA-01762:vopdrv: view query block not in FROM
Cause:This is an internal error message not normally issued.
Action:Contact Oracle Support Services.
Edited by: Karthick_Arp on Sep 23, 2008 11:01 PM

Similar Messages

"ORA-01762: vopdrv: view query block not in FROM" while using LOG ERRORS INTO feature for Update/Delete

Hi
Ours is VPD database in 11GR2. We're using "LOG ERRORS INTO " feature to track list of records violating constraints.
For Inserts it is working as expected but for Updates/Deletes it is throwing mis. ORA- errors. "ORA-01762: vopdrv: view query block not in FROM"
We dint find any clue when searched in net.
Could someone help us here? Is there any limitation with "LOG ERRORS INTO" ?
Below are the steps we're executing
EXEC DBMS_ERRLOG.CREATE_ERROR_LOG(
dml_table_name => 'EMP',
err_log_table_name => 'ERR_EMP'
> DESC EMP
Name                                      Null?    Type
EMPNO                                     NOT NULL NUMBER(4)
ENAME                                              VARCHAR2(10)
SAL                                                NUMBER(7,2)
COMM                                               NUMBER(7,2)
DEPTNO                                             NUMBER(2)
INSERT INTO EMP VALUES('1','Test','@' /* generates Ora */,2,'2); -- ERR_EMP populated
UPDATE EMP set SAL='@'
where EMPNO='1' -- Throwing ORA-01762: vopdrv: view query block not in FROM
Could someone help us?

Hi
Ours is VPD database in 11GR2. We're using "LOG ERRORS INTO " feature to track list of records violating constraints.
For Inserts it is working as expected but for Updates/Deletes it is throwing mis. ORA- errors. "ORA-01762: vopdrv: view query block not in FROM"
We dint find any clue when searched in net.
Could someone help us here? Is there any limitation with "LOG ERRORS INTO" ?
Below are the steps we're executing
EXEC DBMS_ERRLOG.CREATE_ERROR_LOG(
dml_table_name => 'EMP',
err_log_table_name => 'ERR_EMP'
> DESC EMP
Name                                      Null?    Type
EMPNO                                     NOT NULL NUMBER(4)
ENAME                                              VARCHAR2(10)
SAL                                                NUMBER(7,2)
COMM                                               NUMBER(7,2)
DEPTNO                                             NUMBER(2)
INSERT INTO EMP VALUES('1','Test','@' /* generates Ora */,2,'2); -- ERR_EMP populated
UPDATE EMP set SAL='@'
where EMPNO='1' -- Throwing ORA-01762: vopdrv: view query block not in FROM
Could someone help us?

Media Query does not work from GoDaddy redirect?

Website is set up and all looks good, except when the page is loaded from the redirect host name setup in Godaddy, the mobile media queries don't work. I'm not sure why?? The page loads ok, but will not apply the phone.css on a mobile device. However, if I use the local host url all works great. Thank you if you have any recommendations!

Thank you again for taking time to look at this. I failed to mention I had adjusted the media query to 360px. Although, both urls above call up the same web page it seems the first url is wrapping the source into a frame.
Source code from Firefox:
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.01//EN"
"http://www.w3.org/TR/html4/strict.dtd">
<html>
<head>
<title>O'Krent </title>
</head>
<frameset rows="100%,*" border="0">
<frame src="http://www.accu-print.org/okrentgolf" frameborder="0" />
<frame frameborder="0" noresize />
</frameset>



</html>

Viewing pop-up note comments from Acrobat in Reader Mobile

I've added some pop-up note comments to a PDF in Acrobat (though it could have been made in Reader X in the same way). I now want to view those comments in Adobe Reader on my mobile device. However although the text where the comment has been added appears highlighted, when I tap on it I only get the options to change the opacity or color, or clear the highlight.
I've tried this on both my iPhone & Nexus 7, with the same result. I've googled extensively to try & find the answer, but have drawn a blank. Where am I going wrong?
Thanks in advance

I don't want to change or add comments, I just want to be able to view pop-up comments I've added in Acrobat in Adobe Reader Mobile.
It looks like this functionality is not available in Reader Mobile. However I've been able to get round it by using Sticky Notes instead.

ORA-01152: file 1 was not restored from a sufficiently old backup

Hi,
I have restored the control file from auto-backup, but some of my archive logs are missing...
when I am recovering it as
RECOVER DATABASE UNTIL CANCEL USING BACKUP CONTROLFILE;
ORA-00279: change 37158334186 generated at 02/19/2012 02:53:11 needed for
thread 1
ORA-00289: suggestion : /u07/oradata/main/arch/main_738330900_118084_1.dbf
ORA-00280: change 37158334186 for thread 1 is in sequence #118084
Specify log: {<RET>=suggested | filename | AUTO | CANCEL}
CANCEL
ORA-01547: warning: RECOVER succeeded but OPEN RESETLOGS would get error below
ORA-01152: file 1 was not restored from a sufficiently old backup
ORA-01110: data file 1: '/u02/oradata/main/system01.dbf'
and
ALTER DATABASE OPEN RESETLOGS
ERROR at line 1:
ORA-01152: file 1 was not restored from a sufficiently old backup
ORA-01110: data file 1: '/u02/oradata/main/system01.dbf'
how to sort out this issue, I just want to open the database in whatever mode.
Please help me.

If no - then startup in mount state and make this file offline.This is archive log file. Might you thought it as datafile ;-)
@OP.
Once again i suggest you to refer what aman said below.
Aman.... wrote:
This has been discussed already couple of times, tried using the search ?
https://forums.oracle.com/forums/search.jspa?threadID=&q=ORA-01152%3A+file+1+was+not+restored+from+a+sufficiently+old+backup&objID=f61&dateRange=all&userID=&numResults=15
Aman....Also check tihs. but but but but its not an supported format, it can be uesd when there are no other options.
*RECOVER A DATAFILE WITH MISSING ARCHIVELOGS [ID 418476.1]*
Edited by: CKPT on Feb 21, 2012 12:11 PM

ORA-00600: internal error code, arguments: kkqctmdcq: Query Block Could Not

Hi,
I found a error in my alert log file:
Problem Description: problem found on node 1 and node 3 : Alerts ORA-00600: internal error code, arguments: [kkqctmdcq: Query Block Could Not], [], [], [], [], [], [], []
database details:
OS : Linux x86-64
DB: Oracle 10g 2.0.1.0 Production
Please give me your suggestions.
Regards,

Hi,
I would suggest to open a SR with OSS.
From MOS see Note 153788.1 .
Usually patching will suffice.
Regards,

ORA-23401: materialized view ""SYS"".""MV_OPTIONS"" does not exist

Oracle 11gR1
Linux Red Hat 6.3
I have never seem this object SYS.MV_OPTIONS before much less know why it would be missing. Any ideas?
I can no longer refresh my materialized views.

Process worked fine until the addition on new MVs.
What causes error?
Running SP that calls DBMS_MVIEW.refresh. Here is the error in more detail...
"ORA-23401: materialized view ""SYS"".""MV_OPTIONS"" does not exist
ORA-06512: at ""SYS.DBMS_SNAPSHOT"", line 2545
ORA-06512: at ""SYS.DBMS_SNAPSHOT"", line 2751
ORA-06512: at ""SYS.DBMS_SNAPSHOT"", line 2720
What has been changed?
Added new materialized views to my instance that need periodic refreshing.
Note: Running the block below works fine ....
begin
DBMS_MVIEW.refresh('MV_MINE');
end;
I suspect something in the process that calls this function is the issue (of course). But I still wonder what the object SYS.MV_OPTIONS is/does?

Query was not successful in Discoverer viewer

Hi All,
can you please guide me on below issue..
while running the report user is facing the below error.
"query execution was not successful"
-ORA-01722 Invalid number.
Ebiz:12.0.6
DB:11.2.0.2
Disco:10.1.2.55.26
Thanks in Advance.
Regards
Kumar

while running the report user is facing the below error.
"query execution was not successful"This is a generic error which is reported in few docs.
Discoverer Viewer fails Moving Pivot Table Columns: Query Execution was not Successful [ID 948027.1]
Query Execution Not Successful Error In Viewer, Runs In Desktop And Plus [ID 404974.1]
Discoverer 10g (10.1.2.3) Plus/Viewer Cumulative Patch 7 (9112482) Readme For Linux/Unix [ID 821844.1]
Launching A Worksheet In Discoverer 10g / 11g Plus/Viewer On Linux Fails With 'Contact with backend server lost' [ID 871012.1]
Discoverer 10g (10.1.2.3) Plus/Viewer Cumulative Patch 4 (7595032) Readme For Windows [ID 822183.1]
Discoverer 10g (10.1.2.3) Plus/Viewer Cumulative Patch 3 (7319096) Readme For Linux/Unix [ID 761997.1]
Running Some Reports In Discoverer Plus/Viewer 10.1.2.2 Are Failing With "An error occurred while attempting to perform the operation. The operation did not complete successfully." [ID 733603.1]
Discoverer Viewer 10g (10.1.2.3) Passes A Blank Parameter As 'NULL' When Using A 'Drill to Link' [ID 820003.1]
Query Execution was not Successful Error When Running a Workbook [ID 550684.1]
-ORA-01722 Invalid number.Please check the data type of the column or the data type of the records in the table/view and make sure it match the data type of the column.
Thanks,
Hussein

Create Materialized View ORA-01723: zero-length columns are not allowed

I am trying to create a materialized view which derives a column from a function and I get: ORA-01723: zero-length columns are not allowed.
I am using 10gR2 with the following definition (simple version):
CREATE MATERIALIZED VIEW AS
SELECT
function_name(column_name) COLUMN_ALIAS
FROM table_name;
I have even tried to cast it like below:
CREATE MATERIALIZED VIEW AS
SELECT
CAST(function_name(column_name) AS VARCHAR2(200)) COLUMN_ALIAS
FROM table_name;
My function does have an exception to return a value even if no values are found.
I have looked all over for the solution. Does anyone have a way around this issue? I really need my function to derive the column as it has business rules which I cannot join into my materialized view definition. My only hope around this is to insert the values into a table and then create a materialized view from that table, I don't want to do that if someone has a solution around this.
Any help would be greatly appreciated.
Thank you,
Kyle
Edited by: Kyle Miller on Apr 19, 2011 8:28 AM

Have you tried creating a table with the correct structure and then creating the materialized view based on the prebuilt table as described here...
http://www.oaktable.net/content/ultra-fast-mv-alteration-using-prebuilt-table-option
Cheers
Ben

Why does the pop up blocker bar not always give you the option to view a blocked pop up?

Usually when Firefox notifies you that a pop up has been blocked it gives you the option to view the blocked pop up. However, sometimes that option is not there. Typically this isn't a problem at all but once in a while there will be a pop up that I wish to view but there is no option to view it. Does anyone know why the pop up blocker will sometimes give you the fourth option to "Show 'www.blockedwebsite.com'" and sometimes will only give you the three options of "Allow pop-ups for the site", "Edit Pop-Up Blocker Options", and "Don't show this message when pop-ups are blocked"? How can I view a blocked pop-up when it only provides the first three options and not the fourth option to view it? I hope my question was clear enough. Thanks in advance!

It is possible that you run into this maximum (the default value is 20):
* http://kb.mozillazine.org/dom.popup_maximum
To open the about:config page, type about:config in the location (address) bar and press the "Enter" key, just like you type the url of a website to open a website. 
If you see a warning then you can confirm that you want to access that page. 
*Use the Filter bar at to top of the about:config page to locate a preference more easily.
*Preferences that have been modified show as bold(user set).
*Preferences can be reset to the default or changed via the right-click context menu.

How to Export from table view to Excel (not BI query)?

There is a 'How to' document explaining how to export from an iView using a BI query:
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/47fe4fef-0d01-0010-6f87-ed8ecb479123
However:
This 'How-To' document is using an example of a BEx query. I am not using a BEx query, therefore I do not have an "Info port". How can I download to Excel from a table view that is not an iView of a BI query? (It is just a internal table coming from a BAPI).

keenneth,
i am using the query from SQL server, i am having the same problem of not having info port. so did you find a work around for exporting to excel with filters for non sap queries ?
any body who had come across this situation , plz guide me.
thanks in advance
ravi

Content Query Webpart not getting displayed in Mobile view

Hi,
I am having a Content Query Webpart in my page.
In the mobile view it is not getting displayed.
I read that you can create mobile adapters for the control. But I didnt get how to do it for Content Query Webpart.
Any help appreciated..

Is deactivate "Mobile view" a option for you? if then then CQWP will work in same page. You can deactivate that feature from site feature.
Please 'propose as answer' if it helped you, also 'vote helpful' if you like this reply.

Oracle 8.1.7 on linux. plslq block not compiled

I created table test
create test (a varchar2(100),b varchar2(100));
I send query:
delete from test
where (a, b) in (('Z','V'),('X', 'C'),('S', 'P'),('D', 'Y'));
All ok;
I send pl/sql block:
begin
delete from test
where (a, b) in (('Z','V'),('X','C'),('S', 'P'),('D', 'Y'));
end;
Server proccess associated with my session using 100% of CPU and 10 min later
my client receive error ORA-04031:
begin
ERROR at line 1:
ORA-04031: unable to allocate 1024 bytes of shared memory ("shared pool","begin
delete from test
w...","PL/SQL DIANA","PAR.C:parchk:page")
When I send:
begin
delete from test
where (a, b) in (('Z','V'),('X','C'),('S', 'P'));
end;
all ok
What is the reason?
null

I think that the problem is not in size of shared_pool. I changed this parameters but it is not help me. I tested this pl/sql block on such computer with such parameters of kernel and oracle but version of oracle was 8.1.6 - all ok.
I solved this problem by using another pl/sql block:
begin
delete from test
where (a, b) in (('Z','V'),('X','C'),('S', 'P'));
delete from test
where (a, b) in (('D', 'Y'));
end;
And that is why I have a question: Is it Oracle(8.1.7 on Linux) bag or not?
null

View Column info not displaying in Columns Tab

Running XP SP2 and SQL Developer 1.5.1 5440
When looking at views that are using tables from another schema. I don't see any of the columns information. I have DBA role
In rel 1.1.2.25 2579 I see them just fine. (Both loaded on machine right now)
Is this a bug or do I have a setting problem?

Barry,
As a "disclaimer", the points below are based on my usage of SQL Developer and things that bug me about how it works or doesn't work - I know that there are more important things to fix than a number of these.
On to the basics ... and the most basic of the basics for a tool like SQL Developer:
1) Problems with data dictionary queries in navigator or object tabs:
- Triggers not listed in Table tab if trigger owned by different schema to table owner
- Index columns not listed in Table tab if index owned by different schema to table owner
- View columns not listed in View tab if view owned by different schema to current user
- Dependencies not listed in Table/View tab if other object owned by different schema to object owner
- Performance of Table Node (outer join added in 1.5.1)
- there are a lot of other posts about the supplied data dictionary queries not producing the right results and I often find that I am querying the data dictionary directly in a SQL Worksheet for information that should be correct in the navigator/object tabs
Basic things that I expect to work in a tool like SQL Developer (or to work given that they have been included):
1) Popup Describe problems
- schema name is case sensitive, so doesn't find owner.object
- synonym overrides schema name (OWNER.OBJECT will describe local OBJECT synonym instead of OWNER's object)
- position based object name selection includes punctuation
2) Bind variables that work properly in PL/SQL (both Execute Statement and Run Script)
3) Package decomposition in object navigator doesn't report variables or constants of custom types and lists object.column%type constants as "constant"
4) Exporting query results re-executes query to display Export dialog - this presents as SQL Developer freezing after selecting the Export menu option for queries that take a long time for first record to appear
I would use SQL Developer more (or more of SQL Developer) if:
1) More integrated file based development - I still do the bulk of my object creation (largely PL/SQL and views) editing in Wordpad and running via SQL*Plus largely because I get better error reporting.
- display the compile message tab when using the compile button for a file
- show errors doesn't work for views
2) Running Reports hang SQL Developer - I still have my SQL scripts for my common queries, which I can run through SQL Worksheet in a much friendlier fashion (I can cancel them and they don't hang SQL Dev) than I can run reports
Problems that detract from the "polish" of SQL Developer, but don't really have a big impact on usage but discourage me from trying to "convert" non-techie TOAD using colleagues:
1) Multiple TNSNAMES files read - generates multiple entries
2) Export of long string literals causes ORA-972 error
3) "Statement Processed" feedback is extremely sensitive to spaces ("create Statement Processed" where two spaces between the create and view keywords) and assumes simple statements ("create unique Statement Processed" or "create or replace force Statement Processed" as examples)
I think that makes 10 basics to fix (although some as just issues that make the tool look unpolished), however, it does seem as though testing in the following areas could be significantly better:
1) Regression testing - a number of bugs seem to crop up again after being fixed in earlier versions
2) Navigator/object tab queries - especially with multi-schema applications (ie Oracle eBusiness Suite) and just generally objects owned by other schemas
3) Performance with large DBs in terms of object count (ie Oracle eBusiness Suite)
As a final note, it is my impression that SQL Developer development has been unbalanced in focusing too much on including new functionality (which is good) and not enough on getting existing functionality right (which is better).
I hope this helps (and wasn't too long) ...
theFurryOne

ORA-00354: corrupt redo log block header

Hi Guys,
Need your support to resolve one of the oracle issues,
Below are errors visible in alert.log in oracle,
ORA-16038: log 24 sequence# 660467 cannot be archived
ORA-00354: corrupt redo log block header
ORA-00312: online log 24 thread 1: '/oracle/PRD/origlogB/log_g24_m1.dbf'...
2010-10-03 07:26:12.835 20195 kcrr.c
ORA-16014: log 24 sequence# 660467 not archived, no available
destinations
Below is o/p of archive log list seems to be bit strange,
SQL> archive log list
Database log mode Archive Mode
Automatic archival Enabled
Archive destination /oracle/PRD/saparch/PRDarch
Oldest online log sequence 660467
Next log sequence to archive 660467
Current log sequence 660576
And some more info,
SQL> SELECT GROUP#, STATUS, MEMBER FROM V$LOGFILE;
 GROUP# STATUS MEMBER
 28 /oracle/PRD/origlogB/log_g28_m1.dbf
 28 /oracle/PRD/mirrlogB/log_g28_m2.dbf
 27 /oracle/PRD/origlogA/log_g27_m1.dbf
 27 /oracle/PRD/mirrlogA/log_g27_m2.dbf
 26 /oracle/PRD/origlogB/log_g26_m1.dbf
 26 /oracle/PRD/mirrlogB/log_g26_m2.dbf
 25 /oracle/PRD/origlogA/log_g25_m1.dbf
 25 /oracle/PRD/mirrlogA/log_g25_m2.dbf
 24 /oracle/PRD/origlogB/log_g24_m1.dbf
 24 /oracle/PRD/mirrlogB/log_g24_m2.dbf
 23 /oracle/PRD/origlogA/log_g23_m1.dbf
 23 /oracle/PRD/mirrlogA/log_g23_m2.dbf
 22 /oracle/PRD/origlogB/log_g22_m1.dbf
 22 /oracle/PRD/mirrlogB/log_g22_m2.dbf
 21 /oracle/PRD/origlogA/log_g21_m1.dbf
 21 /oracle/PRD/mirrlogA/log_g21_m2.dbf
16 rows selected.
SQL> SELECT GROUP#, SEQUENCE#, MEMBERS, ARCHIVED, STATUS, FIRST_CHANGE# FROM V$LOG;
 GROUP# SEQUENCE# MEMBERS ARC STATUS FIRST_CHANGE#
 21 660571 2 NO INACTIVE 2.9116E+10
 22 660572 2 NO INACTIVE 2.9116E+10
 23 660570 2 NO INACTIVE 2.9116E+10
 24 660467 2 NO INACTIVE 2.9114E+10
 25 660573 2 NO ACTIVE 2.9116E+10
 26 660574 2 NO CURRENT 2.9116E+10
 27 660568 2 NO INACTIVE 2.9116E+10
 28 660569 2 NO INACTIVE 2.9116E+10
8 rows selected.
All file exists but still facing issue, no backup is running
Regards,
Yash

Hi,
Instead of the logfile name, try the command with the logfile integer as mentioned below.
alter database clear unarchived logfile group <integer>;
You can get the logfile integer using the view, v$log.
select GROUP#,MEMBERS,STATUS from v$log;
The value for the parameter GROUP# is the logfile integer.
Hope this helps.
Regards,
Varadharajan M

ORA-01762: vopdrv: view query block not in FROM ????

Similar Messages

Maybe you are looking for