Page fault in nipalk.sys when writing large file , system crashes
When reading from VXI 2211 and writing to a file the system crashes with a page fault error in nipalk.sys. I tried loading new drivers for VISA, VXI, even DAQ which I don't use. Where does nipalk.sys come from??
jcnoble wrote:
> When reading from VXI 2211 and writing to a file the system crashes
> with a page fault error in nipalk.sys. I tried loading new drivers for
> VISA, VXI, even DAQ which I don't use. Where does nipalk.sys come
> from??
This is the low level device driver used by all NI hardware device
drivers. PAL stands most probably for Platform Abstraction Layer and
what that means it is providing an uniform device driver API for
managing memory, IO addresses, DMA channels and Interrupts. Most
probably this NIPAL device driver API is almost the same on all
platforms NI develops modern hardware drivers for. This allows easier
porting of device drivers to new hardware as the big work for porting a
hardware driver is about porting this NIPAL device driver.
I
would not think that disk writing is the real culprit here, but it may
trigger a problem occuring earlier during VXI access.
Rolf Kalbermatter
Rolf Kalbermatter
CIT Engineering Netherlands
a division of Test & Measurement Solutions
Similar Messages
-
Out of memory error when writing large file
I have the piece of code below which works fine for writing small files, but when it encounters much larger files (>80M), the jvm throws an out of memory error.
I believe it has something to do with the Stream classes. If I were to replace my PrintStream reference with the System.out object (which is commented out below), then it runs fine.
Anyone else encountered this before?
print = new PrintStream(new FileOutputStream(new File(a_persistDir, getCacheFilename()),
false));
// print = System.out;
for(Iterator strings = m_lookupTable.keySet().iterator(); strings.hasNext(); ) {
StringBuffer sb = new StringBuffer();
String string = (String) strings.next();
String id = string;
sb.append(string).append(KEY_VALUE_SEPARATOR);
Collection ids = (Collection) m_lookupTable.get(id);
for(Iterator idsIter = ids.iterator(); idsIter.hasNext();) {
IBlockingResult blockingResult = (IBlockingResult) idsIter.next();
sb.append(blockingResult.getId()).append(VALUE_SEPARATOR);
print.println(sb.toString());
print.flush();
} catch (IOException e) {
} finally {
if( print != null )
print.close();
}Yes, my first code would just print the strings as I got them. But it was running out of memory then as well. I thought of constructing a StringBuffer first because I was afraid that the PrintStream wasn't allocating the memory correctly.
I've also tried flushing the PrintStream after every line is written but I still run into trouble. -
when downloading large files such as videos of a television season do you need to turn off autolock to prevent download from halting? And if so, if the download will take a significant amount of time (not sure how much offhand) how do you prevent burn in from prolonged screen image?
Among the alternatives not mentioned... Using a TiVo DVR, rather than the X1; a Roamio Plus or Pro would solve both the concern over the quality of the DVR, as well as providing the MoCA bridge capability the poster so desperately wanted the X1 DVR to provide. (Although the TiVo's support only MoCA 1.1.) Just get a third-party MoCA adapter for the distant location. Why the hang-up on having a device provided by Comcast? This seems especially ironic given the opinions expressed regarding payments over time to Comcast. If a MoCA 2.0 bridge was the requirement, they don't exist outside providers. So couldn't the poster have simply requested a replacement XB3 from the local office and configured it down to only providing MoCA bridging -- and perhaps as a wireless access point? Comcast would bill him the monthly rate for the extra device, but such is the state of MoCA 2.0. Much of the OP sounds like frustration over devices providing capabilities the poster *thinks* they should have.
-
When writing e-mails firefox crashes after you go the format section
When writing e-mails firefox crashes. I can put in the address and subject and then go to he body of the e-mail and put a name it crashes. Ican restart firefox but can't send the e-mail.
Firefox doesn't do email, it's a web browser.
If you are using Firefox to access your mail, you are using "web-mail". You need to seek support from your service provider or a forum for that service.
If your problem is with Mozilla Thunderbird, see this forum for support.
[http://www.mozillamessaging.com/en-US/support/] <br />
or this one <br />
[http://forums.mozillazine.org/viewforum.php?f=39] -
I lost my Creative Cloud app when I had a system crash on my old 13" Mac, how can I reinstall Creative Cloud onto my new 15" Mac?
Cloud License allows 2 activations http://www.adobe.com/legal/licenses-terms.html
-Install on a 2nd computer http://forums.adobe.com/thread/1452292?tstart=0
-Windows or Mac does not matter... 2 on the same operating system, or 1 on each
-Both computer Cloud subscription activations may not be in use at the same time -
UTL_FILE write_error when writing large binary files to unix os
I am trying to write large files to a folder in unix from a table containing a BLOB object. The procedure below is called by another procedure I have written to do this. It works in windows environment fine with files up to 360MB. When I run this exact same procedure in UNIX I get an initialization error. When I change the WB in the fopen call to W it works. I can store all the files I want up to 130MB in size. The next size larger file I have is 240MB and it fails after writing the first 1KB passing the utl_file.write_error message. If someone can help me to diagnose the problem, I would really appreciate it. i have been trying everything I can think of to get this to work.
Specifics are, the windows version is 10GR2, on unix we are running on Sun Solaris 9 using 9iR2
PROCEDURE writebin(pi_file_name IN VARCHAR2, pi_file_url IN VARCHAR2, pi_file_data IN BLOB)
IS
v_file_ref utl_file.file_type;
v_lob_size NUMBER;
v_raw_max_size constant NUMBER := 32767;
v_buffer raw(32767);
v_buffer_offset NUMBER := 1;
-- Position in stream
v_buffer_length NUMBER;
BEGIN
-- WB used in windows environment. W used in unix
v_lob_size := dbms_lob.getlength(pi_file_data);
v_file_ref := utl_file.fopen(pi_file_url, pi_file_name, 'WB', v_raw_max_size);
v_buffer_length := v_raw_max_size;
WHILE v_buffer_offset < v_lob_size
LOOP
IF v_buffer_offset + v_raw_max_size > v_lob_size THEN
v_buffer_length := v_lob_size -v_buffer_offset;
END IF;
dbms_lob.READ(pi_file_data, v_buffer_length, v_buffer_offset, v_buffer);
utl_file.put_raw(v_file_ref, v_buffer, TRUE);
v_buffer_offset := v_buffer_offset + v_buffer_length;
END LOOP;
utl_file.fclose(v_file_ref);
END writebin;
Message was edited by:
user599879check if this cample code helps -
CREATE OR REPLACE PROCEDURE prc_unload_blob_to_file IS
vlocation VARCHAR2(16) := ‘LOB_OUTPUT’;
vopen_mode VARCHAR2(16) := ‘w’;
bimax_linesize NUMBER := 32767;
v_my_vr RAW(32767);
v_start_pos NUMBER := 1;
v_output utl_file.file_type;
BEGIN
FOR cur_lob IN (SELECT vmime_type,
blob_resim,
vresim,
dbms_lob.getlength(blob_resim) len
FROM tcihaz_resim a
WHERE rownum < 3 -- for test purposes
ORDER BY a.nresim_id) LOOP
v_output := utl_file.fopen(vlocation,
cur_lob.vresim,
vopen_mode,
bimax_linesize);
dbms_output.put_line(’Column length: ‘ || to_char(cur_lob.len) || ‘ for file: ‘ ||
cur_lob.vresim);
v_start_pos := 1;
IF cur_lob.len < bimax_linesize THEN
dbms_lob.READ(cur_lob.blob_resim,
cur_lob.len,
v_start_pos,
v_my_vr);
utl_file.put_raw(v_output,
v_my_vr,
autoflush => TRUE);
dbms_output.put_line(’Finished Reading and Flushing ‘ || to_char(cur_lob.len) ||
‘ Bytes’ || ‘ for file: ‘ || cur_lob.vresim);
ELSE
dbms_lob.READ(cur_lob.blob_resim,
bimax_linesize,
v_start_pos,
v_my_vr);
utl_file.put_raw(v_output,
v_my_vr,
autoflush => TRUE);
dbms_output.put_line(’Finished Reading and Flushing ‘ || to_char(cur_lob.len) ||
‘ Bytes’ || ‘ for file: ‘ || cur_lob.vresim);
END IF;
v_start_pos := v_start_pos + bimax_linesize;
WHILE (v_start_pos < bimax_linesize) LOOP
-- loop till entire data is fetched
dbms_lob.READ(cur_lob.blob_resim,
bimax_linesize,
v_start_pos,
v_my_vr);
utl_file.put_raw(v_output,
v_my_vr,
autoflush => TRUE);
dbms_output.put_line(’Finished Reading and Flushing ‘ ||
to_char(bimax_linesize + v_start_pos - 1) || ‘ Bytes’ ||
‘ for file: ‘ || cur_lob.vresim);
v_start_pos := v_start_pos + bimax_linesize;
END LOOP;
utl_file.fclose(v_output);
dbms_output.put_line(’Finished successfully and file closed’);
END LOOP;
END prc_unload_blob_to_file;
set serveroutput on
set timing on
create or replace directory LOB_OUTPUT as ‘/export/home/oracle/tutema/’;
GRANT ALL ON DIRECTORY LOB_OUTPUT TO PUBLIC;
exec prc_unload_blob_to_file ;
Column length: 3330 for file: no_image_found.gif
Finished Reading and Flushing 3330 Bytes for file: no_image_found.gif
Finished successfully and file closed
Column length: 10223 for file: OT311.gif
Finished Reading and Flushing 10223 Bytes for file: OT311.gif
Finished successfully and file closed
PL/SQL procedure successfully completedWith 9iR2 PLSQL can write binary files using UTL_FILE put_raw function, prior to Oracle9iR2 you will need to create an external procedure with Java, C, VB or some 3gl language.
Some references -
http://asktom.oracle.com/pls/ask/f?p=4950:8:::::F4950_P8_DISPLAYID:6379798216275
Oracle® Database PL/SQL Packages and Types Reference 10g Release 2 (10.2)
UTL_FILE - http://download-uk.oracle.com/docs/cd/B19306_01/appdev.102/b14258/u_file.htm#sthref14095
http://psoug.org/reference/dbms_lob.html
Metalink Note:70110.1, Subject: WRITING BLOB/CLOB/BFILE CONTENTS TO A FILE USING EXTERNAL PROCEDURES -
Blue Screen Error "Page fault in nonpaged area" when installing software?
Hi,
I just upgraded from Vista to Windows 7, and went on a computer-buying spree and bought a new router (WRT54GS2). Everything was working fine, until I went to actually install the software, at which point I got the Blue Screen of Death and the error message "page fault in nonpaged area." What can I do to fix it?Do not run the linksys CD to configure the router...You can configure the router manually.Connect the modem to the router on the internet port and the computer to the router on ethernet port..Now,open the GUI of linksys and configure the router.
-
Photoshop crash when opening larger files
Hi there,
A recently upgraded iMac now running Creative Cloud on Mountain Lion is having an issue where Photoshop crashes upon opening a large file, the log files show it as Photoshop is hanging when infact it has crashed. I have pasted one of the log files below.
As a note generally restarting the Mac after this has occured will allow the user to open the file.
Any assistance with this issue is much appreciated.
Date/Time: 2013-10-03 11:32:04 +1300
OS Version: 10.8.5 (Build 12F37)
Architecture: x86_64
Report Version: 11
Command: Photoshop
Path: /Applications/Adobe Photoshop CC/Adobe Photoshop CC.app/Contents/MacOS/Adobe Photoshop CC
Version: 14.1.2 (14.1.2.427)
Parent: launchd [148]
PID: 1853
Event: hang
Duration: 1.48s
Steps: 15 (100ms sampling interval)
Hardware model: iMac10,1
Active cpus: 2
Free pages: 29969 pages (+431)
Pageins: 394 pages
Pageouts: 0 pages
Process: Adobe Photoshop CC [1853]
Path: /Applications/Adobe Photoshop CC/Adobe Photoshop CC.app/Contents/MacOS/Adobe Photoshop CC
Architecture: x86_64
Parent: launchd [148]
UID: 503
Task size: 52634 pages (+81)
Pageins: 377 pages
CPU Time: 0.767s
Thread 0x6aa48 DispatchQueue 1 priority <multiple> cpu time 0.762s
15 ??? (Adobe Photoshop CC + 10804) [0x100002a34]
15 ??? (Adobe Photoshop CC + 2967993) [0x1002d49b9]
15 ??? (Adobe Photoshop CC + 2967772) [0x1002d48dc]
15 ??? (Adobe Photoshop CC + 556898) [0x100087f62]
15 ??? (Adobe Photoshop CC + 23843020) [0x1016bd0cc]
15 ??? (Adobe Photoshop CC + 23838178) [0x1016bbde2]
15 -[NSApplication run] + 517 (AppKit) [0x7fff8b4ac1a3]
15 -[NSApplication nextEventMatchingMask:untilDate:inMode:dequeue:] + 128 (AppKit) [0x7fff8b4b4df2]
15 _DPSNextEvent + 685 (AppKit) [0x7fff8b4b5533]
15 BlockUntilNextEventMatchingListInMode + 62 (HIToolbox) [0x7fff8a4dbae3]
15 ReceiveNextEventCommon + 166 (HIToolbox) [0x7fff8a4dbb94]
15 RunCurrentEventLoopInMode + 209 (HIToolbox) [0x7fff8a4dbeb4]
15 CFRunLoopRunSpecific + 290 (CoreFoundation) [0x7fff844bb0e2]
15 __CFRunLoopRun + 1529 (CoreFoundation) [0x7fff844bbad9]
15 __CFRunLoopDoTimer + 557 (CoreFoundation) [0x7fff844d631d]
15 __CFRUNLOOP_IS_CALLING_OUT_TO_A_TIMER_CALLBACK_FUNCTION__ + 20 (CoreFoundation) [0x7fff844d6804]
15 __NSFireTimer + 96 (Foundation) [0x7fff85048463]
15 ??? (Adobe Photoshop CC + 23838420) [0x1016bbed4]
15 ??? (Adobe Photoshop CC + 554787) [0x100087723]
15 ??? (Adobe Photoshop CC + 555164) [0x10008789c]
15 ??? (Adobe Photoshop CC + 620315) [0x10009771b]
15 ??? (Adobe Photoshop CC + 23836436) [0x1016bb714]
15 ??? (Adobe Photoshop CC + 554787) [0x100087723]
15 ??? (Adobe Photoshop CC + 555164) [0x10008789c]
15 ??? (Adobe Photoshop CC + 582218) [0x10008e24a]
15 ??? (Adobe Photoshop CC + 528382) [0x100080ffe]
15 ??? (Adobe Photoshop CC + 531567) [0x100081c6f]
15 ??? (Adobe Photoshop CC + 651011) [0x10009ef03]
15 ??? (Adobe Photoshop CC + 16970549) [0x10102f335]
15 ??? (Adobe Photoshop CC + 653865) [0x10009fa29]
15 ??? (Adobe Photoshop CC + 6331860) [0x100609dd4]
15 ??? (Adobe Photoshop CC + 6757398) [0x100671c16]
15 ??? (Adobe Photoshop CC + 1693078) [0x10019d596]
15 ??? (Adobe Photoshop CC + 1726596) [0x1001a5884]
15 ??? (Adobe Photoshop CC + 1719489) [0x1001a3cc1]
15 ??? (Adobe Photoshop CC + 1728682) [0x1001a60aa]
15 ??? (Adobe Photoshop CC + 1625676) [0x10018ce4c]
15 PDPageGetVisibleBBox + 922 (AdobePDFL) [0x120e9fbec]
15 ??? (AdobePDFL + 1779121) [0x120eb25b1]
15 ??? (AdobePDFL + 1764463) [0x120eaec6f]
15 ??? (AdobePDFL + 1751140) [0x120eab864]
15 ??? (AdobePDFL + 545158) [0x120d85186]
15 ??? (AdobePDFL + 544095) [0x120d84d5f]
15 ??? (AdobePDFL + 661627) [0x120da187b]
15 ??? (AdobePDFL + 492813) [0x120d7850d]
15 ??? (AdobePDFL + 490211) [0x120d77ae3]
15 ??? (AdobePDFL + 465853) [0x120d71bbd]
15 ??? (AdobePDFL + 1378661) [0x120e50965]
15 ??? (AdobePDFL + 238058) [0x120d3a1ea]
15 ??? (AdobePDFL + 226557) [0x120d374fd]
15 ??? (AdobePDFL + 309142) [0x120d4b796]
15 ??? (AdobePDFL + 309280) [0x120d4b820]
15 ??? (AdobeCoolType + 353207) [0x104fbb3b7]
15 CTCleanup + 724119 (AdobeCoolType) [0x105074605]
15 CTCleanup + 388882 (AdobeCoolType) [0x105022880]
15 CTCleanup + 389039 (AdobeCoolType) [0x10502291d]
11 CTCleanup + 724408 (AdobeCoolType) [0x105074726]
11 ??? (AdobeCoolType + 73737) [0x104f77009]
11 CTCleanup + 325486 (AdobeCoolType) [0x1050130dc]
11 CTCleanup + 324222 (AdobeCoolType) [0x105012bec]
9 CTCleanup + 1026803 (AdobeCoolType) [0x1050be461]
9 CTCleanup + 1025680 (AdobeCoolType) [0x1050bdffe]
9 CTCleanup + 1005119 (AdobeCoolType) [0x1050b8fad]
9 CTCleanup + 1005217 (AdobeCoolType) [0x1050b900f]
9 CTFontManagerCreateFontDescriptorsFromURL + 39 (CoreText) [0x7fff83617b78]
9 CGFontCreateFontsWithURL + 444 (CoreGraphics) [0x7fff893a6523]
9 CGFontCreateFontsWithPath + 40 (CoreGraphics) [0x7fff893a68c5]
9 create_private_data_with_path + 19 (libCGXType.A.dylib) [0x7fff864736aa]
9 FPFontCreateFontsWithPath + 173 (libFontParser.dylib) [0x7fff8846fb13]
2 TFont::CreateFontEntitiesForFile(char const*, bool, TSimpleArray<TFont*>&, bool, short, char const*) + 1741 (libFontParser.dylib) [0x7fff884707db]
2 TResourceForkSurrogate::TResourceForkSurrogate(char const*, bool) + 118 (libFontParser.dylib) [0x7fff88477006]
2 TResourceForkFileReference::TResourceForkFileReference(char const*, bool) + 87 (libFontParser.dylib) [0x7fff884770d3]
2 RMNewMappedRefFromMappedFork + 50 (CarbonCore) [0x7fff86b4ec05]
2 CheckMapHeaderCommon + 4 (CarbonCore) [0x7fff86b4ce31]
*2 hndl_alltraps + 228 (mach_kernel) [0xffffff80002ceb24]
*2 user_trap + 768 (mach_kernel) [0xffffff80002b8d90]
*1 vm_fault + 2106 (mach_kernel) [0xffffff8000262e6a]
*1 thread_block_reason + 300 (mach_kernel) [0xffffff800022db9c]
*1 ??? (mach_kernel + 190673) [0xffffff800022e8d1]
*1 machine_switch_context + 366 (mach_kernel) [0xffffff80002b496e]
*1 vm_fault + 3211 (mach_kernel) [0xffffff80002632bb]
*1 vm_fault_enter + 1641 (mach_kernel) [0xffffff8000262109]
*1 lck_mtx_lock_spin + 10 (mach_kernel) [0xffffff80002ad51a]
2 TFont::CreateFontEntitiesForFile(char const*, bool, TSimpleArray<TFont*>&, bool, short, char const*) + 2407 (libFontParser.dylib) [0x7fff88470a75]
2 TTrueTypeFont::IsTrueTypeFont(TSFNTFont const&) + 20 (libFontParser.dylib) [0x7fff884729bc]
2 TSFNTFont::GetFormat() const + 79 (libFontParser.dylib) [0x7fff88472ac9]
*2 hndl_alltraps + 228 (mach_kernel) [0xffffff80002ceb24]
*2 user_trap + 768 (mach_kernel) [0xffffff80002b8d90]
*2 vm_fault + 2106 (mach_kernel) [0xffffff8000262e6a]
*2 thread_block_reason + 300 (mach_kernel) [0xffffff800022db9c]
*2 ??? (mach_kernel + 190673) [0xffffff800022e8d1]
*2 machine_switch_context + 366 (mach_kernel) [0xffffff80002b496e]
1 TFont::CreateFontEntitiesForFile(char const*, bool, TSimpleArray<TFont*>&, bool, short, char const*) + 3276 (libFontParser.dylib) [0x7fff88470dda]
1 TSFNTFont::GetFormat() const + 79 (libFontParser.dylib) [0x7fff88472ac9]
*1 hndl_alltraps + 228 (mach_kernel) [0xffffff80002ceb24]
*1 user_trap + 768 (mach_kernel) [0xffffff80002b8d90]
*1 vm_fault + 2106 (mach_kernel) [0xffffff8000262e6a]
*1 thread_block_reason + 300 (mach_kernel) [0xffffff800022db9c]
*1 ??? (mach_kernel + 190673) [0xffffff800022e8d1]
*1 machine_switch_context + 366 (mach_kernel) [0xffffff80002b496e]
1 TFont::CreateFontEntitiesForFile(char const*, bool, TSimpleArray<TFont*>&, bool, short, char const*) + 3436 (libFontParser.dylib) [0x7fff88470e7a]
1 TOpenTypeDataForkFont::TOpenTypeDataForkFont(TFileDataSurrogate const&) + 51 (libFontParser.dylib) [0x7fff884956b5]
1 TSFNTOpenTypeFont::TSFNTOpenTypeFont(TSFNTData const&) + 263 (libFontParser.dylib) [0x7fff8849585f]
1 TCFFParsingContext::ParseCFFdata(TType1CFFDescriptor const&) + 320 (libFontParser.dylib) [0x7fff88495ac6]
1 TCFFParsingContext::CommenceParse(bool, bool, int&, unsigned int&) + 2743 (libFontParser.dylib) [0x7fff88483d33]
1 SpecialGlyphIDToStringID(TCFFFontInfo const*, MDataReference&, unsigned short) + 559 (libFontParser.dylib) [0x7fff88495e32]
1 ReadBytesInc(MDataReference&, unsigned char) + 6 (libFontParser.dylib) [0x7fff8847f660]
1 <executing in user space>
1 TFont::CreateFontEntitiesForFile(char const*, bool, TSimpleArray<TFont*>&, bool, short, char const*) + 3299 (libFontParser.dylib) [0x7fff88470df1]
1 TSFNTOpenTypeCIDFont::IsCFFCIDFont(TSFNTData const&) + 35 (libFontParser.dylib) [0x7fff8847ec15]
1 TSFNTType1CFFDescriptor::TSFNTType1CFFDescriptor(TSFNTData const&, unsigned int) + 161 (libFontParser.dylib) [0x7fff8847ed03]
1 TType1CFFDescriptor::TType1CFFDescriptor(TDataReference, TStringRef const&) + 273 (libFontParser.dylib) [0x7fff8847ef15]
1 TType1CFFDescriptor::GetCFFFontSet() + 243 (libFontParser.dylib) [0x7fff8847f3eb]
1 TCFFFontSetInfo::GetArrayInfo(TCFFArrayInfo&, unsigned int) const + 202 (libFontParser.dylib) [0x7fff8847f626]
1 TCFFFontSetInfo::GetIndexedArrayOffset(MDataReference&, TCFFArrayInfo const&, unsigned int) const + 203 (libFontParser.dylib) [0x7fff8847f825]
1 ReadByteInc(MDataReference&) + 27 (libFontParser.dylib) [0x7fff8847f4eb]
*1 hndl_alltraps + 228 (mach_kernel) [0xffffff80002ceb24]
*1 user_trap + 768 (mach_kernel) [0xffffff80002b8d90]
*1 vm_fault + 2106 (mach_kernel) [0xffffff8000262e6a]
*1 thread_block_reason + 300 (mach_kernel) [0xffffff800022db9c]
*1 ??? (mach_kernel + 190673) [0xffffff800022e8d1]
*1 machine_switch_context + 366 (mach_kernel) [0xffffff80002b496e]
1 TFont::CreateFontEntitiesForFile(char const*, bool, TSimpleArray<TFont*>&, bool, short, char const*) + 2349 (libFontParser.dylib) [0x7fff88470a3b]
1 TFileDataSurrogate::TFileDataSurrogate(char const*, bool) + 133 (libFontParser.dylib) [0x7fff88472151]
1 TFileDataReference::TFileDataReference(char const*) + 63 (libFontParser.dylib) [0x7fff8847230b]
1 __open + 10 (libsystem_kernel.dylib) [0x7fff86654fee]
*1 hndl_unix_scall64 + 19 (mach_kernel) [0xffffff80002cf453]
*1 unix_syscall64 + 522 (mach_kernel) [0xffffff80005e97ba]
*1 open + 260 (mach_kernel) [0xffffff8000303394]
*1 ??? (mach_kernel + 1059785) [0xffffff8000302bc9]
*1 vn_open_auth + 2089 (mach_kernel) [0xffffff8000310409]
*1 VNOP_OPEN + 70 (mach_kernel) [0xffffff8000318e66]
*1 hfs_vnop_open + 232 (mach_kernel) [0xffffff800051a078]
*1 decmpfs_validate_compressed_file + 274 (mach_kernel) [0xffffff800032d952]
*1 vnode_validate_compressed_file_Type4 + 109 (AppleFSCompressionTypeZlib) [0xffffff7f822b2514]
*1 doValidateType4 + 139 (AppleFSCompressionTypeZlib) [0xffffff7f822b217a]
*1 _getxattr + 221 (AppleFSCompressionTypeZlib) [0xffffff7f822b1285]
*1 VNOP_GETXATTR + 63 (mach_kernel) [0xffffff800031a9ff]
*1 hfs_vnop_getxattr + 691 (mach_kernel) [0xffffff8000520e63]
*1 VNOP_READ + 77 (mach_kernel) [0xffffff8000318f5d]
*1 hfs_vnop_read + 550 (mach_kernel) [0xffffff8000502416]
*1 cluster_read_ext + 882 (mach_kernel) [0xffffff80002ec762]
*1 ??? (mach_kernel + 976357) [0xffffff80002ee5e5]
*1 msleep + 116 (mach_kernel) [0xffffff8000572244]
*1 ??? (mach_kernel + 3612246) [0xffffff8000571e56]
*1 lck_mtx_sleep + 78 (mach_kernel) [0xffffff800022666e]
*1 thread_block_reason + 300 (mach_kernel) [0xffffff800022db9c]
*1 ??? (mach_kernel + 190673) [0xffffff800022e8d1]
*1 machine_switch_context + 366 (mach_kernel) [0xffffff80002b496e]
1 TFont::CreateFontEntitiesForFile(char const*, bool, TSimpleArray<TFont*>&, bool, short, char const*) + 579 (libFontParser.dylib) [0x7fff88470351]
1 TResourceForkSurrogate::TResourceForkSurrogate(char const*, bool) + 118 (libFontParser.dylib) [0x7fff88477006]
1 TResourceForkFileReference::TResourceForkFileReference(char const*, bool) + 87 (libFontParser.dylib) [0x7fff884770d3]
1 RMNewMappedRefFromMappedFork + 50 (CarbonCore) [0x7fff86b4ec05]
1 CheckMapHeaderCommon + 4 (CarbonCore) [0x7fff86b4ce31]
*1 hndl_alltraps + 228 (mach_kernel) [0xffffff80002ceb24]
*1 user_trap + 768 (mach_kernel) [0xffffff80002b8d90]
*1 vm_fault + 2106 (mach_kernel) [0xffffff8000262e6a]
*1 thread_block_reason + 300 (mach_kernel) [0xffffff800022db9c]
*1 ??? (mach_kernel + 190673) [0xffffff800022e8d1]
*1 machine_switch_context + 366 (mach_kernel) [0xffffff80002b496e]
2 CTCleanup + 1026901 (AdobeCoolType) [0x1050be4c3]
2 CTCleanup + 1015024 (AdobeCoolType) [0x1050bb65e]
2 CTCleanup + 1015393 (AdobeCoolType) [0x1050bb7cf]
2 CTCleanup + 1015176 (AdobeCoolType) [0x1050bb6f6]
2 CTFontCreateWithPlatformFont + 150 (CoreText) [0x7fff835e28cc]
2 TFont::TFont(unsigned int, double, CGAffineTransform const*, __CTFontDescriptor const*) + 43 (CoreText) [0x7fff835e7295]
2 TFont::InitDescriptor(unsigned int, __CTFontDescriptor const*) + 89 (CoreText) [0x7fff835e70a7]
2 CGFontCreateWithPlatformFontAndVariation + 47 (CoreGraphics) [0x7fff897c547f]
2 CGFontFinderCreateFontWithPlatformFont + 57 (CoreGraphics) [0x7fff895fa2af]
2 CGFontCreateFontsWithURL + 556 (CoreGraphics) [0x7fff893a6593]
2 CGFontCopyPostScriptName + 9 (CoreGraphics) [0x7fff893a6b0e]
2 get_name_table + 29 (CoreGraphics) [0x7fff893a6b42]
1 CGFontNameTableCreate + 986 (CoreGraphics) [0x7fff893a6f3d]
1 add_root_name + 60 (CoreGraphics) [0x7fff893a73e5]
1 copy_name + 62 (libCGXType.A.dylib) [0x7fff86473b53]
1 TFPFont::CopyFontNames() const + 591 (libFontParser.dylib) [0x7fff884761e9]
1 CFDictionaryAddValue + 189 (CoreFoundation) [0x7fff8449a58d]
1 CFBasicHashAddValue + 3176 (CoreFoundation) [0x7fff8449b268]
1 __CFBasicHashAddValue + 1226 (CoreFoundation) [0x7fff84494b8a]
1 __CFDictionaryStandardRetainValue + 71 (CoreFoundation) [0x7fff84494d57]
1 CFRetain + 164 (CoreFoundation) [0x7fff84488b54]
1 <executing in user space>
1 CGFontNameTableCreate + 928 (CoreGraphics) [0x7fff893a6f03]
1 add_root_name + 60 (CoreGraphics) [0x7fff893a73e5]
1 copy_name + 336 (libCGXType.A.dylib) [0x7fff86473c65]
1 CFDictionarySetValue + 189 (CoreFoundation) [0x7fff844939ed]
1 __CFBasicHashAddValue + 75 (CoreFoundation) [0x7fff8449470b]
1 __CFBasicHashRehash + 625 (CoreFoundation) [0x7fff8449b551]
1 malloc_zone_malloc + 71 (libsystem_c.dylib) [0x7fff87357183]
1 szone_malloc_should_clear + 971 (libsystem_c.dylib) [0x7fff87364b08]
1 tiny_malloc_from_free_list + 1078 (libsystem_c.dylib) [0x7fff8736457e]
1 tiny_free_list_add_ptr + 19 (libsystem_c.dylib) [0x7fff87360db4]
1 <executing in user space>
4 CTCleanup + 724448 (AdobeCoolType) [0x10507474e]
4 CTCleanup + 848573 (AdobeCoolType) [0x105092c2b]
4 CTCleanup + 833672 (AdobeCoolType) [0x10508f1f6]
Hi Mylenium,
I have heard back from the client and they have advised me that this has resolved the issue.
Regards,
Exceldp -
Page faults trying to generate results to text file
I am on Developer 6.0 and when I click on the menu > FILE > Generate to file > Text -- I get an illegal operation message box Stating "RWRBE60 caused an invalid page fault in module CA60.dll at 017f:67f30cb3." Friends in other companies also experience the same problem.
Robert,
You should start by upgrading to a newer version of Reports.
You should be using Reports 6i with at least patch 1 (6.0.8.8.3). Patch 4 is the latest.
Next time you post here, please tell us which version you are using, and in which operating system. Doing that, it's easier for us to help you.
Pedro. -
"Not connected to internet" error only when uploading large files.
Hi,
I have a strange problem that occurs when im uploading large files to any of my servers....
The files upload just fine but while im uploading im unable to use the internet for anything else. For example if I try to open a web page I get an error saying im not connected to the internet. This error will persist until the file finishes uploading.
Its a strange and annoying problem and was wondering if anybody could throw any light on the problem.
I cant be sure but it may have coincided with me connecting a new Netgear wireless modem router.
Many thanks
MattHi Sorry, only just noticed your reply. Didn't get an email alert like I usually do.
Thanks for that. To be honest I have no idea what QOS is but I will take a look at the routers settings to see if it makes sense to me.
Thanks
Matt -
TC and WD500 External drive - Locks up when copying large files
I have a TC with a Western Digital 500GB my Book connected to the USB port on the TC that I use for network Storage. Everything works fine until I try to copy large files or directories from the Finder mounted share. After the copy freezes the external drive can no longer be seen by airport utility. If I look at disks it sees the disk but no partition. I have to power cycle the external drive to have TC see the drive again. Then I disconnect the drive and plug it in directly to the MAC and run disk utility and his repairs the journal. I have to do the repair every time it locks up. Should the external drive be formatted different or does it have to be connected to a USB hub. Or is this just a bug with the TC and afp ?
I have this very same problem.
I tried to copy a 4GB+ folder from the Macbook to the 500GB MyBook attached to my TC and it froze.
Now the the files on the MyBook are invisible when attached to the TC ("0 Items") but are available when the drive is connected directly to the Macbook. I have run disk utility but it hasn't helped. The disk is FAT 32 formatted and the files on the MyBook are still invisible over the network.
When the drive attached to the Macbook directly I can see a 'phantom' file with the same title as the 4GB+ folder I'd tried to copy. This file is "ZERO KB" and it cannot be deleted (error code -43).
Anyone have a clue what is happening here? -
4.2.3/.4 Data load wizard - slow when loading large files
Hi,
I am using the data load wizard to load csv files into an existing table. It works fine with small files up to a few thousand rows. When loading 20k rows or more the loading process becomes very slow. The table has a single numeric column for primary key.
The primary key is declared at "shared components" -> logic -> "data load tables" and is recognized as "pk(number)" with "case sensitve" set to "No".
While loading data, these configuration leads to the execution of the following query for each row:
select 1 from "KLAUS"."PD_IF_CSV_ROW" where upper("PK") = upper(:uk_1)
which can be found in the v$sql view while loading.
It makes the loading process slow, because of the upper function no index can be used.
It seems that the setting of "case sensitive" is not evaluated.
Dropping the numeric index for the primary key and using a function based index does not help.
Explain plan shows an implicit "to_char" conversion:
UPPER(TO_CHAR(PK)=UPPER(:UK_1)
This is missing in the query but maybe it is necessary for the function based index to work.
Please provide a solution or workaround for the data load wizard to work with large files in an acceptable amount of time.
Best regards
KlausNevertheless, a bulk loading process is what I really like to have as part of the wizard.
If all of the CSV files are identical:
use the Excel2Collection plugin ( - Process Type Plugin - EXCEL2COLLECTIONS )
create a VIEW on the collection (makes it easier elsewhere)
create a procedure (in a Package) to bulk process it.
The most important thing is to have, somewhere in the Package (ie your code that is not part of APEX), information that clearly states which columns in the Collection map to which columns in the table, view, and the variables (APEX_APPLICATION.g_fxx()) used for Tabular Forms.
MK -
USB key ejecting itself when transferring large files
I have a LG 16G USB key formatted in MacOS extended (journaled), I've been encountering a particular issue when I try to transfer files taken on another computer and copying them from the key to my Macbook pro ( OSX 10.6.2). after it start transferring it ejects itself with the "the disk was not ejected properly" message, then reappears right away in the finder...
the problem doesn't present itself when I copy a file from my macbook pro to the key, and then try transferring it back to my computer. and I've tried this with both small files (under 200mb) and large files (over 4G).
I've also noticed the transfer rate is very slow when this happens.
so far the problem only presents itself when I transfer files from one of the MacPro's in my university's studios, but since I work a lot on these machine, this is becoming quite a problem. I don't have the complete specs of these machines, they all run on Leopard, probably 10.5.something. not SL... perhaps that's the problem?
I've seen similar post on the forum concerning this issue with TimeMachine backup drives, suggesting it had something to do with the sleep preferences, however I've tried all the potential solutions from these post and the problem persists.
So far the only solution I've found has been to transfer the files to my girlfriend's macbook (running on tiger), and then transferring the files in target mode from her computer to mine... quite inconvenient...
I have a feeling this might be due to the formatting of my key, I have a 2G USB key formatted in MS-DOS (FAT32) and have had no problems with it so far. The reason I formatted in Mac OS extended is simple, I work in the video field and with HD I find myself often moving around single files larger then 4GB, which I've come to understand isn't possible in FAT 32.
I'd like to know how to resolve this, and especially like to know if it is indeed a format issue, since I'm soon going to acquire a new external hard drive for the sole purpose of storing my increasing large media files and would like to know how to format it.Hi,
I have an external USB Card reader (indeed - two different readers), which have the same problems with self-ejecting disks. Every transfer of data from SD card from my camera is the pain now. There is many different themes related to the self-"the disk was not ejected properly" situation, but no working solution now. -
ITunes hangs when syncing large files to network attached drives, ideas?
I've done a lot of research on my problem and have come up blank so far. This is my setup and situation. I use a macbook pro and iTunes 10, but since I use a small SSD, I do not have much room to keep iTunes media on my disk. So, I use an external USB drive, formatted HFS+ J, accessible over my AirPort Extreme as a networked drive and am trying to keep my media there by setting my iTunes Media folder location to my "/Volumes/<drive name>/iTunes/iTunes Media" under iTunes>Preferences>Advanced. For the most part this works, but there are a few gotchas that are making this setup unusable.
The biggest problem is if I try to sync a large file (for example a 250MB app) with iTunes to my networked storage, the culprit almost always being a large iOS app in Mobile Application folder, iTunes will hang with the spinning color wheel, and in the toolbar shows "Not Responding". This also hangs the Finder. After this situation, I pretty much have to force quit everything and reboot my machine to get the Finder and iTunes back to health.
So, I thought that I would try keeping the iOS apps on my local drive and just move my music out to a network drive. But iTunes doesn't allow any granular configuration of the sort (big FAIL on Apple's part), and I've read up that iTunes does not play nice with symbolic links or else I would keep the iTunes Media location set to my local drive and symlink the Music folder out to my network drive.
So, given that 1) I don't have enough space to keep everything local, 2) trying to keep everything on NAS causes my machine to fail when syncing my iPhone or trying to consolidate my iTunes library because of large file transfers over the network making thing go insane, and 3) iTunes doesn't easily let you manage your library with symlinks, any ideas on what I should do?i assume you are connecting wirelessly to the AEBS, correct ?
as a test, run an ethernet cable from your Mac to one of the LAN ports of the AEBS (you might want to turn off airport on your machine), then try again.
does the problem persist ? -
Privileges problem when transferring large files
This just happened, and I don't know what changed. I cannot transfer large files from my Macbook Pro to my MacPro desktop, neither on the network nor by a USB hard drive. I get the infamous "You do not have sufficient privileges" message. The files start copying, and after about 1gb or so, the message pops up. Small files no problem, there's no restriction on those. It does not matter which disk I am trying to copy it to.
I thought it was just a problem with iMovie files and folders (these get big fast), but it seems to be an issue with any large file. I have repaired permissions on both disks, I have made sure that the unlock key is unlocked and that all the boxes are checked "Read & Write".
And this problem just arose today. Nothing has changed, so far as I know.I assume I am always logged in as administrator because I have never logged in as anything else. It also does not matter from what folder, or even disk drive, I am trying to transfer from. If the file is above a certain size, it stops transferring and I get the error.
What interests me is not that I immediately get the "insufficient privileges" error when I try and transfer a forbidden folder or file. I've seen that. This happens after about a gig of data has transferred over already, then that error pops up.
Maybe you are looking for
-
Meeting requests sent with iOS7 don't work correctly
When I create a meeting with invitees in an Exchange calendar on iOS7.0.2 (iPhone4), the receiver get's a mail with a "meeting.ics" file. When opened, it's not possible to select accept,decline, or maybe, but only select "add to calendar" on their iP
-
Business Content Template as a Background
Hi Experts, I need use Business Content Templates for the query background.Here My problem is once I install the templates and start using those templates for my query output those woould be saved in favourties. My doubt is how to make those temp
-
Link translation without content type
i am trying to publish a website which uses a XMLHttpRequest without defining a content type. the result i am getting is that www.internalurl.com/internalPath/?somedatabutnofile is translated in www.externalurl.com/externalPath/internalPath/?somedata
-
Error when AI channel scan at two places in one VI
Hi, everyone: My program mainly reads Analog data from NI-DAQ board, it reads from 4 analog inputs. I use one loop for queue input, and the other loop for execution. For data reading, I use "AI configure", "AI scan", "AI clear" in a stacked sequenc
-
I have a client that has a lot of 1,000 mp3 files to be uploaded in the site. Business Catalyst doesn't have a good deal when it comes to online storage [$10/1 GB annually]. GoDaddy has a great deal so I'm going for that. My question is, Is it possib