PDF Output Settings for Word Email Merge?

Hi all,
I'm using Acrobat X's integration in Word to do an email merge of PDFs. There are images in my template that need their quality maintained. So far, I've been unable to find a setting that affects the "Merge to Adobe PDF" script.
I've created a new PDFMaker Settings > Conversion Setting that uses all the highest image-preserving settings I've found to change from my research. This includes turning off downsampling and compression. When I simply print to PDF or Save As PDF, the image comes out perfectly. When I Mail Merge to PDF, the image quality is lost again.
Where can I adjust the settings for the script that merges to PDF to preserve the image quality?
Thanks for any help!

Found a workaround, but it does not answer my original question.
My images were in PNG format (which I had intended to use for its transparency). PNGs appear to not handle well in the PDF mail merge. Testing with JPGs, I found they retained much more quality, so I ended up using my Snipping Tool to save the images (with the background seen through the transparent parts) as a JPG, then swapped those images into the document.
Very sloppy workaround, but it got the job done!

Similar Messages

  • What are the settings for verizon email on ipad?

    what are the settings for verizon email on ipad? have tried everything must be missing something.

    Have you looked here?
    https://www22.verizon.com/foryourhome/vzrepair/vziha/requestrepair.aspx?CMP=DMC- CVZ_ZZ_ZZ_Z_ZZ_N_X221
    Check: What are my email settings

  • Error in PB60 "Settings for word processing system are wrong"

    Hello Everybody
    I am working on recruitment,
    i have create applicant activity in SPRO, but when i was going to create applicant activity PB60 maintain and entering the personal number the error display " "Settings for word processing system are wrong"
    then i check feature set word  processing system.
    plz anybody guide me how to resolved this problem
    thanks
    urvashi

    Hi Urvashi,
    Please check the following in your system:
    - Go to PE03
    - feature 'WPROC'
    - select 'Attributes'
    - press 'Display'
    - press 'Struct.'
    - there you will find the Basic information 'Passing type'
      This must be set to '2' (Table Transfer). If this is set
      to '1' i.e. please change this entry.
    Hope this help
    Sarah

  • Recruitment: ERROR -- Settings for Word Processing System are wrong

    Hi All,
    SAP System: 4.7.
    In both cases wheteher I configure feature WPROC to return value as :
    1) RTF - so that MS Word woulds be used for applicant letters, OR
    2) ' ' - so that SAP Script Editor is used for applicant letter.
    get the same error while I try to run transaction PB60
    <b>ERROR: Settings for word processing system are wrong.</b>
    But the very same settings are working in IDES.
    Can you tell me where have I possibly gone wrong or what am I overlooking ?
    Regards,
    Amit

    Hi Urvashi,
    Please check the following in your system:
    - Go to PE03
    - feature 'WPROC'
    - select 'Attributes'
    - press 'Display'
    - press 'Struct.'
    - there you will find the Basic information 'Passing type'
      This must be set to '2' (Table Transfer). If this is set
      to '1' i.e. please change this entry.
    Hope this help
    Sarah

  • I am trying to set up a friends new iPad but am struggling with settings for her email accounts can anyone help me

    can someone help with the email settings for the email accounts on this iPad.? Or tell me what you would expect the default settings to be. currently we mail is a virgin.net account

    Please see: http://help.virginmedia.com/system/selfservice.controller?CMD=VIEW_ARTICLE&ARTIC LE_ID=2979&CURRENT_CMD=SEARCH&CONFIGURATION=1001&PARTITION_ID=1&USERTYPE=1&LANGU AGE=en&COUNTY=us&VM_CUSTOMER_TYPE=Cable for details.
    Regards,
    Steve

  • Settings for incoming email on mac

    settings for incoming email on mac

    If you mean iCloud email settings, see http://support.apple.com/kb/HT4864.

  • Setup failed - Thunderbird failed to find settings for your email account, what does that mean?

    After completing the setup i get the following message:
    Thunderbird failed to find settings for your email account. I don't know where to look for a solution to this problems & it's very frustrating since I'd like to start using Thunderbird.
    Thanks.
    Lorene Albers
    Mississauga
    Canada

    Knowing who is your email provider would be a good starting point.
    Your ISP?
    One of the big free providers? e.g. googlemail, live mail/outlook.com/hotmail, yahoo, gmx/1and1?
    Your webhost?

  • Difficulty cross-referencing PDF created from MS Word Mail Merge

    Hello!
    I'm using MS Word Mail Merge to create PDF documents with Adobe Acrobat 9 (Merge to Adobe PDF ribbon). Adobe allows me to specify the file name to use, which Adobe uses for the first portion of the file name, but the remaining is up to Adobe and varies depending on the total number of documents.
    The help shows as: "The PDF will be named using this text plus a series of numbers. For example, if you type JulyLetter in the Specify PDF File Name box, the mail-merged PDFs might appear as JulyLetter_0000123, JulyLetter_0000124, July Letter_0000125, and so forth."
    If the numbering was sequential, there wouldn't be a problem. However, if the number of records exceeds 50 documents, the convention changes at intervals of 50 and it makes it difficult to cross-reference without opening the document.
    As an example, if there are a total of 67 documents, you get the following results:
    Record 15 is named JulyLetter_15015.pdf. (meaning range 1-50, record 15)
    Record 20 is named JulyLetter_15020.pdf (meaning range 1-50, record 20)
    Record 56 is named JulyLetter_51676.pdf (meaning range 51-67, record 6)
    Record 66 is named JulyLetter_516716.pdf (meaning range 51-67, record 16)
    The breaks are at intervals of 50 records, meaning that if there were 230 records to print, record 143 would be JulyLetter_10115043.pdf, record 180 would be JulyLetter_15120030.pdf.
    Does anyone know where the naming or breaks are controlled within Adobe to just keep it sequential or if there is possibly a cross reference file created that may assist with cataloging?
    Thanks

    In each of the successive versions of Acrobat to the version you have, improvements have been made in converting a PDF to Word format. Acrobat X and the version about to come out, Acrobat XI, do the best job. I can't guarantee that the results would be an improvement in your case, but I have a hunch they would.

  • Microsoft Word email merge with Apple Mail Question

    Hi
    I like using word to merge data such as letters but use apple mail as main email application. Does anyone know if it's possible to email merge from word to be sent by apple mail?

    You may want to search and/or post in Microsoft's own forums for their Office Mac products:
    http://www.officeformac.com/productforums/

  • I updated to iOS 8 on iPhone 5s and now iMessage will not verify my email. It has said "Verifyng" since yesterday, but has not sent a verification email. I checked my iCloud settings for that email address and it shows "pending".

        I updated to iOS 8 on iPhone 5s and now iMessage will not verify my email address to use to send/ receive messages. It has said "Verifyng" beside it in settings since yesterday, but has not sent a verification email. I have also tried Adding it as a new email address several times, but get the same outcome.  I can still send/ receive texts from my phone number, just not from the email address.
         In my iCloud settings under Contact Information for that email address and it shows "pending".  When I select "Resend Verification Email" I get "Cannot Connect to iCloud".

    Hello, Dorian071.  
    Thank you for visiting Apple Support Communities. 
    Here is the best article to reference when experiencing issues with iMessage activation issues.
    iOS: Troubleshooting FaceTime and iMessage activation
    http://support.apple.com/kb/ts4268
    Cheers,
    Jason H.

  • What is the best HD output settings for YouTube uploading?

    Trying out iMovie '09 for the first time.
    I shot a 2.5 minute video (AVCHD) and with
    the video output settings I selected it is taking
    about 20 minutes to encode.
    That is way too much time...or is it?
    Based on a YouTube video I watched on editing
    in iMovie '09 I set my video and audio outputs as follows...
    * Export using Quicktime
    * File Format: MPP4
    * Video Format: H.264
    * Data Rate: 8192
    * Image Size: 1920x1080HD
    * Frame Rate: 60
    Encoding: Faster Encode
    Audio Data Rate: 256kbps
    Encode Quality: Best
    Now where can I improve encoding time without sacrificing
    a huge amount of quality in my YouTube upload? I really want
    the upload to look crisp HD on YouTube.
    Thanks

    For what it's worth, I used these settings earlier today in a test.
    Share/Export Using QuickTime
    Movie to MPEG4
    Options:
    h.264
    10,000 kbits per second
    1920x1080HD
    Frame Rate 30
    Keyframe: Automatic
    Main Profile
    Single Pass.
    Here are the [results for 1920x1080|http://www.youtube.com/watch?v=tdBwUzWZf9M]
    Other test results are in [this thread|http://discussions.apple.com/thread.jspa?threadID=2579263&tstart=0]
    By the way, there is nothing magic about 10,000 kbps. If you used 16,000 kbps, it would be roughly the same data rate as Apple Intermediate Codec. But since YouTube does not penalize you for using a high data rate, as long as it fits their time limit, you can err on the side of high quality. The trick is to start high and then back off until you notice the quality dropping. In your case 8,000 may be fine.
    My guess would be your frame rate is the issue. Most AVCHD camera shoot 30 frames per second (or 60 interlaced fields per second).
    Message was edited by: AppleMan1958
    Message was edited by: AppleMan1958

  • Recomended output settings for screen recordings

    I am fairly new at this and all of the options for outputs, inuts, codecs and the like are bit overwelming. I was wondering if anyoen could share me me some of their seetings that they use for the output of video for the web. I will be outputting at 880 X 660 if that metters.
    Many thanks,
    Houston

    Here is the (perfectly working) code that this resulted in:
    /// <summary>
    /// Using the export function (instead of hard-to-understand-output-script in the SaveForWeb function below)
    /// We have not yet found a way to respect the output setting (regarding) åäö in saving files tab of the flyout-menu
    /// in Save for web and devices (no matter using the export function or the old "script" way).
    /// Currently using a workaround, by setting the final name AFTER that the file has been exported.
    /// </summary>
    /// <param name="docRef">The document to export</param>
    /// <param name="filePath">The path to the file to write</param>
    /// <param name="percentage">Jpeg compression in percent</param>
    private void SaveJpegForWebUsingExport(dynamic docRef, string filePath, int percentage)
        // Begin with deleting the destination image if it already existed on disk.
        if (System.IO.File.Exists(filePath))
            System.IO.File.Delete(filePath);
        //var options = new ExportOptionsSaveForWeb;
        dynamic options = Activator.CreateInstance(Type.GetTypeFromProgID("Photoshop.ExportOptionsSaveForWeb"));
        options.quality = percentage;
        options.format = 6; // JPEG = 6 (according to Object Model Viewer i Extenscript Toolkit)  .Type.GetTypeFromProgID("SaveDocumentType.JPEG");   // Save Format for the file
        var mockupValidFilePath = System.IO.Directory.GetParent(filePath).FullName + "\\tempfile.jpg";
        // dynamic exportType = Type.GetTypeFromProgID("ExportType.SAVEFORWEB"); fungerar inte
        // ExportType.SAVEFORWEB = 2 (according to Object Model Viewe in Extenscript Toolkit)
        docRef.Export(mockupValidFilePath, 2, options);
        // Since "Save for web and devices" (export document) renders unpredictable results,
        // neglecting the output settings, we rename the file after it has been exported.
        System.IO.File.Move(mockupValidFilePath, filePath);

  • Settings for outgoing Email

    Hi
    i am working in crm2007 version and trying to send an outgoing email from UI and once i send the mail and look back into my outlook sent items found no update here...and when i try to send mail from CRM system to my outlook id but not recieved any mail in to my outlook....but outgoing email Activity is created in CRM system...
    could any one let me knoe what settings do i still maitain to have the above send functionality in total....
    Thanks
    Phani

    Phani,
    there is a small customizing that needs to be set.
    link under spro --> CRM -> Basic functions -> One-to-One E-Mail -> define multipart email  ....
    these properties can be set.
    Address Search in Groupware --> where should the app serach for email addresses not identified as CRM contacts
    Groupware for E-Mail Integration -> define mail client for inbound email
    Groupware/E-Mail Copies -> define mail client to put the copy in the sent items 
    Supported E-Mail Formats -> mail format
    Additionally transaction type for inbound mail is 0004, outbound 0005
    pls create a blank outbound mail (no reply) from CRM and check if this reaches the recipients and is getting put in the sent folder after checking those settings.
    is case on that does not help pls create an OSS and send it to me.
    cheers
    martin

  • How do I set the conversion settings for Word to ignore outline autonumbering for headings?

    I have a user manual in Word that uses outline autonumbering for Heading 1, Heading 2, etc. For example, "1.0 Introduction," "1.1 System Settings" and so on).
    I know when setting the conversion settings for FrameMaker, you can select the Ignore Autonumber option in the Conversion Settings dialog to keep only the paragraph content. I don't see anything like this for the Word Conversion Settings. Does this capability exist?

    To clarify:
    I have my paragraphs in Word set up with the required numbering properties using Word's Style settings. In Word, I want the headings to be numbered 1.0, 1.1, 1.1.1, etc. because the intent is for the reader to read through the manual like a book - from start to finish.
    I'm single-sourcing my manual from Word into RoboHelp to generate an online help package. However, I do not want my RoboHelp headings to be numbered because the user may or may not read each topic in order (in other words, they may only need to read what's in section 3.2, but won't get there by reading sections 1.0 through 3.1 first). I might also clarify that each heading is its own topic - so Section 3.2 would be a separate topic from 3.0 and 3.1.
    So for example, in Word, it reads like this:
         "1.0 Introduction
         [content goes here]
         1.1 System Requirements
         [content goes here]
         1.2 References
         [content goes here]"
    And in RoboHelp, I want it like this
         "Introduction
         [content goes here]"
         ---[end of topic]---
         "System Requirements
         [content goes here]"
         ---[end of topic]---
         "References
         [content goes here]"
         ---[end of topic]---
    Does that make sense?
    So how do I keep the numbering in my Word document, but set up the Conversion Settings in RoboHelp to ignore those numbers and only include the text following the autonumber? I have been able to do this when single-sourcing a FrameMaker book into RoboHelp.

  • Output Settings for a Billing Documents

    Where do I make the setting for output for a specific billing type. I will use the standdard layout for testing purposes.
    Thank you.

    Hi,
    Go to SPRO --> Sales and Distribution -->Basic Functions -->Output Control -->Output Determination -->Output Determination Using the Condition Technique -->Maintain Output Determination for Billing Documents
    -->Maintain Output Types (V/40). Here you should select the Standard Output type for Billing RD00. If you want to copy, you may copy the standard and Rename it ZRD0.
    Then assign the condition type ZRD0 to the Output determination procedure V10000 in Maintain Output Determination Procedure.
    Then Assign the Output determination procedure V10000 with the Billing type F2 in Assign Output Determination Procedures.
    Then maintain the condition record in VV31.
    Regards
    M. Lakshmi Narasimhan

Maybe you are looking for