Possibility of adding new fields to migo transaction

Is there a possiblity of adding new fields in migo transaction so that we can enter the base price of items in po.
Also Can we send mail to relevant authorization if there is difference in price entered in the po and the value entered in GR

Hi, You can use BADI 'MB_MIGO_BADI' for adding custom fields at item as well as header level .
or Check SAP Note 339448 - MIGO: settings of table control
2-You can not do any thing related to price in MIGO, since you cannot enter any manual values in MIGO, it will always pull from PO or MIRO (in case of Imports).

Similar Messages

Regarding - add a new field in migo transaction

Hai guys,
i need to add one field in MIGO transaction, can u pls tell me the step by step procedure for adding the new field in migo transaction.
Regards,
N.selvamuthukumar.

Hi Selvamuthu,
It is possible using the BADI MB_MIGO_BADI to add Additional tabs in header and/or item as required
MB_MIGO_BADI -> BAdI in MIGO for External Detail Subscreens
See the documentation below...........
With the Business Add-In (BAdI) MB_MIGO_BADI, you can extend the interface of the goods movements transaction ( MIGO) with additional tabstrip controls for the detailed information (detail tabstrips) and header information (header tabstrips). It is possible for an external application
to display an additional detail tabstrip with own subscreen (max. 10 lines) in MIGO
to display an additional header tabstrip with own subscreen (max. 3 lines) in MIGO
The program name, screen number and tab page text can be determined dynamically. Different screens can therefore be controlled according to the mode (for example, change mode, display mode, goods receipt, goods issue).
To read the complete documentation --go to se18 --click on BADI -- enter -- MB_MIGO_BADI----Display
inside click on "DOCUMENTATION" button and there is a complete documentation step by step
in addition to it ...--go to se18 --click on BADI -- enter -- MB_MIGO_BADI----Display ->
on the top menu -> "GOTO" -> sample code -> "Display"
in will get the "methods" tab..see the description
Initialization and Registration of Ext. Detail Screens
PBO of Detail Screen
PAI of Detail Screen
Add / Change a Line (GOITEM)
Delete a Line (GOITEM)
MIGO Reset (Delete All Internal Data)
Post Goods Movement
Check Item Data of Goods Movement
Mode of Transaction MIGO (Action / Reference Document)
Status Information and Header Data
Save Held Data
Load Held Data
Delete Held Data
PBO of Header Screen
PAI of Header Screen
Check Header Data of Goods Movement
Publish Item Data After Processing
sample code is given in these methods..so when we create a custom badi implementation of our own go to the sample code and copy the required code in the corresponding methods as required
double click on the method..for eg:IF_EX_MB_MIGO_BADI~PBO_HEADER in the sample code to see code....in this particular method we can see how method calls an external program and screen to create a new tab in MIGO...use code from mainly the following to get a new header/item tab
PBO of Header Screen
PAI of Header Screen
PBO of Detail Screen
PAI of Detail Screen
Pls take some time to analyse the code or flow but we can have the tabs in the header/item level
Hope it helps
Regards
Byju

How to add a new field in migo transaction (header level)

hi guru's
can you please tell me how to add a field in migo transaction?
i want to add a field in header data and that too under "general" tab. i dont have data regarding that field.
and when we enter a value for that field in migo, it has to take .
thank you.

Hi, My problem is allmost like the one you are discussing here....
I have appended MKPF for my Z-fields and created a sub-screen (Design the screen). I am calling this screen in PBO_HEADER. Now i can see my newly created tab along with fields.
Now the problem is:-
1. How I can transfer that data entered in screen fields back to my BADI.
2. How to update my z-fields in MKPF table along with standard fields. I have tried using FM - 'J_1IEXGM_BADI_POST_DOCUMENT' in Method - POST_DOCUMENT, but its not updating table record in MKPF for Z-Fields.
Please advice.....
Thanks

Adding new field in Call transaction

Hi,
i need to add a new field which is in flat file to created transaction(vd01) using call transaction method.
pls help me through step by step process
thanks in advance
Barkath

1. Add the field in the file.
2. Fill the BDCDATA table in your program ( find an exact and insert bdcdata record)
perform bdc_field using 'RF02K-LIFNR' ITAB-LIFNR.
Or
Re-record VD01 and create a temporory program and check where exactly you need add the perform to fill bdcdata table.
Regds
Manohar

Adding new field in ES55 transaction

Hi experts
1)I have to add new input field in transaction ES55( second screen where address and all other details are coming )to input Business Partener Number .
I tried to do so using user exit I tried all function modules of XES55 function group but couldnt find any exit.
What should I do?
2) My second requirement is as soon as user Input Business Partner No. the address details of that business partener should come here by itself as connection object address details.
Any ideas? What should I do?How can this be done.
Thanks

Hi,
good question - as far as I know, there is no solution to this requirement. BUT usually the business partners are created AFTER the connection object was created and get the address of the connection object...
But anyway, only thing I can think of, check the exists ITOB000* - maybe those are passed ...
Otherwise - just use ECC 6.0 and the enhancement framework.
KR
Uwe

Enquiry about adding new field in SAP transaction vl10c

Hi,
requirement:
I want to add additonal field after executing SAP transaction vl10c.
help me
pooja

Hi,
You acn add extra fields with the help of a screen exit.
Try the following Exits:
V50R_USEREXITS
V50R_USEREXIT_PREPARE
V50R_USEREXIT_TRANSF
Related to the program RVV50R10C.
Regards,
Anji

Is it possible to add PERNR field to MIGO or MB1A transaction screens?

Hi,
Ours is a service industry with @ 10000 employees and we have implemented SAP with MM & HR module. We issue uniforms to all the employees when they join (new Joinee) and again once in January every year as reissuance. We intend to keep size information in employee masters in HR along with station code, designation, department and cost centers.
At present we are using two fields goods recipient and unloading point to mention employee code and type of issue (new joinee or reissuance). This is because employee code (PERNR) field is not there in MIGO_GI screen or MB1A screen.
Is it possible to add PERNR field to any of these transaction screens?
If added then we can fetch the relevant information about issuance of information along with station code, designation, department in Z report.
If possible, then how it can be done?
Thanks in advance,
Satish

Hi ,
as i understand we can add new fields in a transaction through user exit /field exit. so please discuss with your ABAP consultant & try to find out all the exit available for MIGO/ MB1A. then you have to decide which one will suit you. here you have to consider some factors like whether you need to enter values in the field or the field needs to fatch any value from any other table & should populate here.
the ABAPer can then write the code & add your required logic here.
i am not very good in this subject. just tried to share what ever i knew.
regards,
anubhab

Adding new field in output layout in transaction ME2N

I would like to know if it is possible to add new fields in the output layout of transaction ME2N. For example field EKPO-AFNAM (Requisitioner) that in the standard layout is not used.
Thanks a lot
Melih

Dear Melih,
We can do.add some functions.In this way SAP provided some dynamic search strategeis.you can use other wise create through variant cofiguration.
press SHIFT+F4 will apper dynamic selection tab there you can select some search strategeis.
Hope this can helps you
Prem.

Error on MIGO with added new field that was not pass empty

Hello,
I added new field and screen to MIGO with MB_MIGO_BADI using Sample
Code. It seems on MIGO. But when i pass empty this new field, i take an
error message. So how can i pass empty for this new field?
Best regards,
Munur

I send all methods codes by order :
Moderator message - Please respect the 5,000 character maximum when posting. Post only the relevant portions of code
Edited by: Rob Burbank on Jan 11, 2011 5:12 PM

How to add a new Field in MIGO

Dear Sir,
We have a requirement of adding a new FIELD in MIGO under the "Detail Data" . The purpose is that at the Item level , we should be able to mention some additional information . For the new Field , an additional Tab has to be created . The Field must except long Text type data and during MIGO Save , the Custom Field data must be saved in Z table .
We request , SAP experts to kindly guide us as how can we do this . A step wise guidence would be highly helpful .
We assure full points for the suggested solution please .
Regards
B Mittal

Hi,
1.Go to SMOD. Press F4 in the Enhancement field. In the next popup window, click pushbutton Information system.
2.Then mention the particular package name of the transaction you need to enhance. Then you will be shown the list of Enhancement components for that particular package.
3.Note down the enhancements. Then, come to the initial screen of SMOD and view the documentation of each enhancement to find out which one is required for your development
4.Go to transaction CMOD and create a project
5.Then, click on the pushbutton Enhancement Assignments in the Application Toolbar
6.Click on the components in Application Toolbar.
7.Here you will be shown the function module exits, screen exits and Include tables.
8.Click on the custom screen in which it suits the requirement of adding the custom field to the layout.
9.Click on layout and go to get from dictionary and select the field you need to add and click ok.
10.Place the field in the layout and activate it.
11.After that you come back and check the respective function module in which you need to implement the code.Therfore we have chosen the Exit_sap_XXX
12.Now, code has to be written in the function modules EXIT_SAPMMXX_00X so that data flows to and fro between the main SAP program and custom sub screen program. Double clicking on the exit we get the following screen
Double click on the include and write the required code inside it. Then activate it.
Now come back and activate the entire project.

Adding new fields from CI Include to Standard SAP Screen

Hi All,
I am enhancing Infotype 0487. I have added new fields to the CI include and created the screen fields in subscreen 0200 with reference to the data dictionary fields. When I test the subscreen alone, the new fields are displaying correctly and F4 help is active. But when I view the whole screen(2000) in PA30, the new field is inactive and I am not able to enter data. Also F4 help option is present for the field but when it is selected, a message 'No Values Found' is displayed. Please suggest some solution.
Thanks in advance
Regards,
Sivasankari
Edited by: Julynila on Oct 7, 2010 10:41 AM

Hi,
This might be the standard transaction, so there is a possibility of adding the fields using the Screen variants using SPRO, get in touch with your functional consultant. there you can copy an existing screen and add the required fields and rename the screen to different number, and in the config this new screen can be added.
Thanks,
Srini.

Adding new fields to assignment block, what are the steps to do this.

CRM 7.
Could someone tell me what the steps are to add new fields to specifdic assignment block. Assume that these fields do not already exist in any given structure/table.
My understanding is that I need to use transaction EEWB and then somehow use the component "BSP_DLC_FS" and view "factsheet". But having never used EEWB before I'ma tad lost. I'm in EEWB and have crfeated a project and believe that I now need to create an extension. When doing this I am displayed a box with 4 fields, being: Name, Description, EEW Bus object and Extension type. What are my next steps?
I assume that the EEW bus object is 'BUPA' and the extension type is 'ADD_NEW_FIELDS'. However, how do I know for sure that the EEW bus object should be 'BUPA', bearing in mind that I'm adding new fields to the Account (BP) main address communication data Assignemnt block?.
I wondered if anyone has a link to any guide docuemnt about how to do this?.
Any help would be very much appreciated.
I attempted to use EEWB to add new fields to BUPA but am hitting the error: BDT-DC is Not Prepared for This Application Object
On searching I can see that there are ways around this, via SM30 against table/view V_TBZ1_DC, changing the BDT BC settings, whatever they are. But it gives me a warning when this happens and mentions that only SAP are allowed to do this, but it will allow me to create a transport if I press on past this. Should I need to make this change though, or have I just done something wrong within EEWB I wonder.
Jason

Hi Jason,
You can try using Application Enhancement Tool (AET) to create new fields instead of EEWB,
Best Regards,
Gobinda

Adding new fields in Custom Infotype

Hi,
I need to change some fields of Custom Infotype. But project is already gone live for 1 country. will making changes to infotype affect for existing live country?
Safe side....We are thinking Adding new fields in Custom Infotype. & displaying corresponding fields for countries in another tab
& hiding the old tab.
Please let me know procedure for Adding new fields in Custom Infotype for displaying in new tab.
Edited by: Sachin Thigale on Aug 23, 2010 7:04 PM
Edited by: Sachin Thigale on Aug 23, 2010 7:05 PM

Please search. Lot of Threads on this.
Follow these steps.
Go to Transaction PM01.
2) Enter the custom Infotype number which you want to create (Should be a 4 digit number, start with 9).
3) Select the u2018Employee Infotypeu2019 radio button.
4) Select the u2018PS Structure Infotypeu2019.
5) Click on Createu2026 A separate table maintenance window appearsu2026
6) Create a PS structure with all the fields you want on the Infotype
7) Save and Activate the PS structure
8) Go back to the initial screen of PM01.
9) Click on u2018Allu2019 push button. It takes a few moments.
10) Click on u2018Technical Characteristicsu2019. Infotype list screen appears
11) Click on u2018Changeu2019(pencil) button
12) Select your Infotype and click on u2018Detailu2019 (magnifying glass) button
13) Give u2018T591Au2019 as subtype table
14) Give u2018T591Su2019 as subtype txt tab
15) Give your subtype field as subtype field
16) Save and come back to PM01 initial screen
17) Click on u2018Infotype Characteristicsu2019 u2026 Infotype list screen appears
18) Click on u2018Changeu2019 (pencil) button
19) Click on u2018New Entriesu2019
20) Enter your Infotype number and short text
21) Here we have to set different Infotype Characteristics as per the requirement. (Better open another session with some standard Infotypeu2019s infotype characteristics screen and use as the reference to fill yours)
22) Save your entries.
23) Now the Infotype is created and ready to use.
24) If you want to change the layout of the Infotype as per your requirementu2026
25) In the PM01 initial screenu2026Select u2018Screenu2019 radio button and give 2000 as the screen name, then click on edit.
26) In the next screen.. Select u2018Layout Editoru2019 and click u2018Changeu2019.
27) Screen default layout appearsu2026here you can design/modify the screen..change the attributes of the fields..etc.
28) Save and activate. (Donu2019t forget to u2018Activate at every level
i think u have to select CI_INCLUDE while enhanceing the Standrad Infotype
The above details are from the following link
Re: How to add fields in custom infotype and update its screens

New field in MIGO

HI all,
Is it possible to add one more date field in MIGO transaction? If yes, how?
Thanks in advance,
Madhu

Hi,
With MB_MIGO_BADI , you can add additional tabstrip controls for the detailed information (detail tabstrips) and header information (header tabstrips) controls.
This badi comes with sample code implement this sample code as a reference I hope it will help you a lot.
For sample code goto tcode se18 enter badi name
From file menu choose goto->sample code->display.
Cheers
Ahsan

Added new field to cube but data not passed from DSO

Hope someone can help.
(BI 7.0) We added new fields into a cube. The fields already existed in the DSO. When we ran the process chain in development for the first time after making this change, we notice that the 'historical' data for these fields is populated in the cube. When we do this in our quality system only new data passed to the cube is updated. In development in the sub-chain DTP request we see all previous requests listed under selections. In quality it is only the latest request. The only difference is that the DeltaInit flag in the DTP request in development is ticked (extraction mode) - but not in quality. Does anyone know whyb this is?

hi peter,
Adding fields to cube doesn't affect delta status...The delta DTP should be able to handle delta requests automatically.
I guess in you quality system, the cube already got all requests updated from ODS before you importing the change request. And in develop system none of the requests in ODS were updated before the change.
Regards,
Frank

Possibility of adding new fields to migo transaction

Similar Messages

Maybe you are looking for