Problem importing a module and finding it's commands?

Hi,
I have a problem. I'm trying to import the DFSR module and use it's commands in my PS session.
But, I can't get the commands to show.
I've looked in my system32 directory and I can see the DFSR module folder.
But when I run the command to import the module nothing happens, and it's not showing in my Module window in the ISE.
What could be going wrong?
Thanks

Get-Module -List DFSR
Where did you save the module to?
Modules should be saved to the Modules folder of the profiles folder.
dir "$(Split-Path $profile.CurrentUserCurrentHost)\Modules"
dir "$(Split-Path $profile.AllUsersCurrentHost)\Modules"
¯\_(ツ)_/¯

Similar Messages

Import UPK modules and sections into Knowledge Pathways?

"...i'm trying to export content from UPK and load into Knowledge Pathways.... I would like to maintain the structure of modules and sections... is this possible? if it is.. how? where can i find how to do it?"
What versions of UPK and Knowledge Pathways are you using? If you're using the current versions (UPK 3.5.1 and Knowledge Pathways 5.5), you should have no problems importing importing UPK modules and sections into Knowledge Pathways using the import player content feature, which is detailed in the product documentation. If you have additional questions, please let us know.
Best regards,
Marc

Hello,
This has been posted to the UPK forums:
Import UPK modules and sections into Knowledge Pathways?
Best regards,
Marc

Problem with application modules and switching from 2 tier to 3 tier mode

Hello,
I've got an application in 2 tier mode. Now I wanted to switch to 3 tier mode but get a class cast exception. It has turned out, that panelBinding.getApplication().getApplicationModule().findApplicationModule returns in 2 tier mode <ModuleName>Impl and in 3 tier mode oracle.jbo.client.remote.ApplicationModuleImpl. But searching for modul name with panelBinding.getApplication().getApplicationModule().getApplicationModuleNames() returns the right in names in 2 tier and in 3 tier mode. Does anybody know a way to access <ModulName>Impl in 3 tier mode?

This is the reason that the BC4J project will create an <appmodulename>AM interface and a <appmodulename>AMClient Implementation that you include on the client side if you expose any methods in your app module. You should access them by casting it to the interface, NOT the appModuleImpl class. If you stick to using the interface, then you should be fine.
So to keep your implementation flexible, you should do this on the client to access your custom methods on your app module:
The BC4J project should generate the following classes:
AppModule Name = MyCustomAM.xml
AppModule Implementation = MyCustomAMImpl.java
Custom AppModule Interface = /common/MyCustomAM.java
Custom clientside AppModule Implementation = /client/MyCustomAMClient.java
On the client, do the following:
import my.bc4j.model.package.common.MyCustomAM;
// Call custom method on App module
MyCustomAM am = (MyCustomAM) panelBinding.getDataControl().getApplicationModule();
am.myCustomMethod(someParams);Hope this helps.
Erik

Problems importing into iMovie and which is the required space..

Hi Karsten!
I could see that you know about video editing. And I have some problems and doubts I would like to ask.
The thing is that I have just bougth an ibook of 80 Gb hard disk RAM 512 MB Speed 1.67 GHz and I am trying to edit a documentary with it. The thing is that I started to importing images from a HDV 1080i Sony Camcorder into iMovie and the speed wasnt in real time, was slowing down to half of the original speed. I went to visit the help of iMovie it was saying when it happens is due to the desfragmentation of the disk, but I dont know if it is the real problem, it is a new computer, and how I can solve it.
And I also would like to know if I could have better results in the video importing and editing with an external hard driver other wise I could add more ram and more memory for the hard disk in the computer...
And the last thing, I would like to know how much space would I need in my computer for install and using Final Cut Pro and if it would be easy with more memory or an external hard drive...
Please Karsten or whoever who can have knowledge about these matter could help me. I really need it so much to start with my docu...
Thank you
Mac OS X (10.4) 80 Gb hard disk RAM 512 MB Velocidad 1.67 GHz

"..which is the difference between FCP and FCE?.."
FCE is Final Cut Express, a cheaper and 'cut-down' version of FCP (Final Cut Pro).
FCE changes HDV (hi-definition) video into a slightly different format called 'Apple Intermediate Codec' when it's importing HDV material - just like iMovie HD does. This means that importing is generally slower than importing ordinary DV, because the movie has to be converted while it's importing. On a G4 PowerBook or iBook HDV might import at half-speed, or take even longer (..maybe 4x 'real time'), as you've found.
The latest version of FCP can import HDV, and edit it, without any conversion, Apple says. But I don't know if that applies on any Mac, or if that needs a special capture card to be fitted into a PowerMac. In theory, I'd expect that importing and editing HDV using FCP HD 5 (..the latest version..) would be faster than on a PowerBook - because there's no conversion involved - but I can't say for certain till I receive my latest version of FCP (..I just did an Apple "cross-grade" to convert my FCP HD 4.5 into FCP HD 5).
HDV doesn't take up any more room on a tape than normal DV, because the high-definition is 'squashed' onto the tape, using MPEG-2 compression. Because iMovie HD and FCE HD can't handle this kind of compressed material directly, they convert it into the Apple Intermediate Codec, and that form of the video takes up more storage on a hard disc than the normal DV does!
So although normal DV uses about 13 gigabytes of hard disc space per hour of running time, the converted HDV (..converted into 'AIC'..) takes up, er ..I'm looking for a recent project ..most are on an external disc ..are here's a simple one: one-and-a-quarter minutes' worth uses 904 megabytes; nearly 1 gigabyte! ..Here's another: four-and-a-half minutes' worth takes up 6.5 gigabytes!
Using normal DV, 6.5 gigabytes would hold half an hour's worth of video, not 4.5 minutes' worth!
So you will need a big external hard disc to store hi-def footage. At least, with iMovie HD or FCE HD.
I don't know if FCP HD 5 would store imported footage in the original HDV format, that is with the same storage requirements of ordinary DV - like HDV tapes. If so, that means that you could store hi-def (..if you're using FCP HD 5..) in just the same amount of space as normal DV ..but I don't know for sure. Maybe you could ask in the FCP Discussions. I probably can't tell you till next week or so..
Where to get a 300gb hard disc? I'm sure there must be at least one shop, or electronics store, in Istanbul which sells them at reasonable prices. Otherwise, look online. There are many companies which now sell 300gb discs: Maxtor and LaCie, for example. But you do need one with a FireWire connection; not just USB. You don't need to buy from an Apple store: buy one from any computer shop ..an external hard disc for a PC works exactly the same ..but you must format it for use with a Mac, as described before.
All I know of Istanbul is Cumhuriyet Caddesi, Taksim Square, and the areas around what used to be the floating bridge, and the Spice Market, and round Haigha Sophia, but there must be lots of computer shops somewhere in the city.
"..I have never used iMovie for editing, I understood it is only good for capturing, sample and concise.." and it's also good for transitions, titles, adding photos and audio, adding video effects and for audio tweaking. And it integrates perfectly with iPhoto, iDVD, GarageBand ..and now 'iWeb'.

Problems with browser loading and finder menus

I have a MacPro Tower using airport to connect to a DSL modem. Recently I am having problems with very slow loading of web pages, often showing "Can't Find Server" errors. The problem is not with my DSL provider, because I have two older Macs in the house using the same DSL line and they are working fine. Video tutorials on Adobe's site are freezing about two minutes in and never load entirely (not a problem on the other Macs). This happens with any browser so not a browser problem. Also when quitting applications on occasion the finder menu continues to show the menu for the application I have just quit and seems reluctant to go back to finder or another application.
Anyone have any ideas?

Similar problem here: sometimes ALL browsers (Safari, Camino, Firefox) stuck randomly on certain web pages.
If I force close the browsers, the program remain in Dock (but not in Process Monitor or in Terminal) and the machine refuse to restart (but others programs works as well).
Even if I submit a "sudo reboot" the machine remains in unknow state.
The only way to exit from this situation is to do an hard reset.

Problems with vmware module and Xorg

Hello everybody!
Today I wanted to install and setup Arch Linux on my computer into a VMware Virtual Machine, first steps were very nice and worked ok, but now I trying to install LXDE as a desktop I already installed xorg drivers and lxde this is my Xorg.0.log
http://pastebin.com/f8gwbdcb
[ 979.359] Current Operating System: Linux localhost 3.15.1-1-ARCH #1 SMP PREEMPT Tue Jun 17 09:32:20 CEST 2014 x86_64
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 979.393] Initializing built-in extension MIT-SCREEN-SAVER
[ 979.411] (EE) Failed to load /usr/lib/xorg/modules/drivers/vmware_drv.so: /usr/lib/xorg/modules/drivers/vmware_drv.so: file too short
[ 979.411] (EE) Failed to load module "vmware" (loader failed, 7)
[ 979.411] (EE) No drivers available.
[ 979.411] (EE)
[ 979.411] (EE) no screens found(EE)
[ 979.412] (EE)
[ 979.412] (EE) Please also check the log file at "/var/log/Xorg.0.log" for additional information.
[ 979.413] (EE)
If I want to see what's inside vmware_drv.so.... it's a empty file, all files under /usr/lib/xorg/modules/drivers are empty: `du *`
4 Desktop
0 /usr/lib/xorg/modules/drivers/ark_drv.so
0 /usr/lib/xorg/modules/drivers/ast_drv.so
0 /usr/lib/xorg/modules/drivers/ati_drv.so
0 /usr/lib/xorg/modules/drivers/cirrus_alpine.so
0 /usr/lib/xorg/modules/drivers/cirrus_drv.so
0 /usr/lib/xorg/modules/drivers/cirrus_laguna.so
0 /usr/lib/xorg/modules/drivers/dummy_drv.so
0 /usr/lib/xorg/modules/drivers/fbdev_drv.so
0 /usr/lib/xorg/modules/drivers/glint_drv.so
0 /usr/lib/xorg/modules/drivers/i128_drv.so
0 /usr/lib/xorg/modules/drivers/intel_drv.so
0 /usr/lib/xorg/modules/drivers/mach64_drv.so
0 /usr/lib/xorg/modules/drivers/mga_drv.so
0 /usr/lib/xorg/modules/drivers/modesetting_drv.so
0 /usr/lib/xorg/modules/drivers/neomagic_drv.so
0 /usr/lib/xorg/modules/drivers/nouveau_drv.so
0 /usr/lib/xorg/modules/drivers/nv_drv.so
0 /usr/lib/xorg/modules/drivers/openchrome_drv.so
0 /usr/lib/xorg/modules/drivers/r128_drv.so
0 /usr/lib/xorg/modules/drivers/radeon_drv.so
0 /usr/lib/xorg/modules/drivers/savage_drv.so
0 /usr/lib/xorg/modules/drivers/siliconmotion_drv.so
0 /usr/lib/xorg/modules/drivers/sis_drv.so
0 /usr/lib/xorg/modules/drivers/tdfx_drv.so
0 /usr/lib/xorg/modules/drivers/trident_drv.so
0 /usr/lib/xorg/modules/drivers/v4l_drv.so
0 /usr/lib/xorg/modules/drivers/vesa_drv.so
0 /usr/lib/xorg/modules/drivers/vmware_drv.so
0 /usr/lib/xorg/modules/drivers/voodoo_drv.so
Arch linux looks really nice, clear and simple I want to go on playing with this distro but I have problems with this issue .
Thanks!

Hello everybody!
Today I wanted to install and setup Arch Linux on my computer into a VMware Virtual Machine, first steps were very nice and worked ok, but now I trying to install LXDE as a desktop I already installed xorg drivers and lxde this is my Xorg.0.log
http://pastebin.com/f8gwbdcb
[ 979.359] Current Operating System: Linux localhost 3.15.1-1-ARCH #1 SMP PREEMPT Tue Jun 17 09:32:20 CEST 2014 x86_64
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 979.393] Initializing built-in extension MIT-SCREEN-SAVER
[ 979.411] (EE) Failed to load /usr/lib/xorg/modules/drivers/vmware_drv.so: /usr/lib/xorg/modules/drivers/vmware_drv.so: file too short
[ 979.411] (EE) Failed to load module "vmware" (loader failed, 7)
[ 979.411] (EE) No drivers available.
[ 979.411] (EE)
[ 979.411] (EE) no screens found(EE)
[ 979.412] (EE)
[ 979.412] (EE) Please also check the log file at "/var/log/Xorg.0.log" for additional information.
[ 979.413] (EE)
If I want to see what's inside vmware_drv.so.... it's a empty file, all files under /usr/lib/xorg/modules/drivers are empty: `du *`
4 Desktop
0 /usr/lib/xorg/modules/drivers/ark_drv.so
0 /usr/lib/xorg/modules/drivers/ast_drv.so
0 /usr/lib/xorg/modules/drivers/ati_drv.so
0 /usr/lib/xorg/modules/drivers/cirrus_alpine.so
0 /usr/lib/xorg/modules/drivers/cirrus_drv.so
0 /usr/lib/xorg/modules/drivers/cirrus_laguna.so
0 /usr/lib/xorg/modules/drivers/dummy_drv.so
0 /usr/lib/xorg/modules/drivers/fbdev_drv.so
0 /usr/lib/xorg/modules/drivers/glint_drv.so
0 /usr/lib/xorg/modules/drivers/i128_drv.so
0 /usr/lib/xorg/modules/drivers/intel_drv.so
0 /usr/lib/xorg/modules/drivers/mach64_drv.so
0 /usr/lib/xorg/modules/drivers/mga_drv.so
0 /usr/lib/xorg/modules/drivers/modesetting_drv.so
0 /usr/lib/xorg/modules/drivers/neomagic_drv.so
0 /usr/lib/xorg/modules/drivers/nouveau_drv.so
0 /usr/lib/xorg/modules/drivers/nv_drv.so
0 /usr/lib/xorg/modules/drivers/openchrome_drv.so
0 /usr/lib/xorg/modules/drivers/r128_drv.so
0 /usr/lib/xorg/modules/drivers/radeon_drv.so
0 /usr/lib/xorg/modules/drivers/savage_drv.so
0 /usr/lib/xorg/modules/drivers/siliconmotion_drv.so
0 /usr/lib/xorg/modules/drivers/sis_drv.so
0 /usr/lib/xorg/modules/drivers/tdfx_drv.so
0 /usr/lib/xorg/modules/drivers/trident_drv.so
0 /usr/lib/xorg/modules/drivers/v4l_drv.so
0 /usr/lib/xorg/modules/drivers/vesa_drv.so
0 /usr/lib/xorg/modules/drivers/vmware_drv.so
0 /usr/lib/xorg/modules/drivers/voodoo_drv.so
Arch linux looks really nice, clear and simple I want to go on playing with this distro but I have problems with this issue .
Thanks!

Lightroom 5.4 problem importing older crw and nef files

Built new computer. Fresh install of Photoshop Lightroom 5.4. Imported photos to lightroom 5.4. After import session completed noted some folders in catalog had zero photos. Checked folders in explorer and photos/files are present. Able to open and view photos/files in Photoshop cs5.
Files are raw files format from canon G1 CRW and Nikon d70 NEF.
Any ideas? How do I proceed? Should I download and install the free Adobe DNG Converter? But these are old cameras?
thanks

Thanks for the reply. No the files were not list in a LR Catalog anywhere on the computer. I was able to import the missing files by right clicking on the empty folder in the LR Catalog, selected the import to folder option. This opened the import LR Window, I deselected the "duplicate option" . This allowed the files to become visible, not the usual grayed out thumbnails usually seen if attempting to import a duplicate. Once I selected the raw files LR imported them to the folder. I did get a LR message stating that a "smart preview already was present for files.
If LR was able to verify a smart preview for the files from a previous import, why were the folders in LR displaying a 0 for files/photos?
I am in the process of reviewing the LR Catalog to ensure everything was imported.

Problems importing through log and transfer

anybody know why i cant import canon elph 100HS video files through log and transfer in final cut pro 7?
thanks

Does Canon have a plugin for working with that camera and FCP like they do for their larger DSLRs? If so, download and install it and then try Log & Transfer again. If not, you'll need to convet the files from the camera using other apps like MPEG Streamclip or possibly ClipWrap.
-DH

Importing OLD black and white videotape - please help!

Hello!
I have imported many VHS tapes with a setup that includes iMovie HD '06 and a sony miniDV camera set to pass-through video. Quality of course limited by VHS tape source but problem importing a black and white VHS tape has me stumped. The black and white tape was actually dubbed years ago from reel-to-reel sony videotape, though I don't think that should matter:
Tape is a high-contrast outdoor scene and occasionally when less contrasted imported picture is watchable but mostly plagued by bands of light and dark. The really weird thing is that simultaneously with importing footage with the contrast bands the TV hooked up to the VCR shows a good, watchable picture! Something in the conversion must be astray - though same setup works fine for color (and in fact imports TV channel that VCR is set to when tape is not playing). I have a feeling that this is problem with some compensatory mechanism in camera that attempts to dampen the contrast and overcompensates - sort of like Macrovision works (my limited understanding of it, anyway!). Importantly, the picture on the camcorder shows the same artifacts. Anyone with any ideas? Would getting an S-Video player help (I couldn't find one a while back when I bought this VCR for dubbing purposes)? Any help appreciated! -Bob

It may be that your "black and white" tape is a copy of a tape of another TV system, e.g; it's a PAL recording of a French SECAM tape, or it's a US NTSC tape.
In other words, because it's a copy of an original of a different system, the colour information isn't reproducible.
iMovie may thus be confused about what it's supposed to be importing.
This is suggested because you say that "..the TV hooked up to the VCR shows a good, watchable picture!.." ..If it's a multi-standard TV which can display PAL, SECAM and NTSC, and it's a multi-standard VCR, then it may be showing you a reasonable copy of the original, but iMovie isn't automatically multi-standard (..you have to choose PAL or NTSC when starting a project..) and so it's caught between two systems. Why not see if you get any better result by changing the default standard (PAL or NTSC; 25fps or 30fps) and then starting a new project?
If you're in Euro-PAL land, and you can manage to find and borrow an NTSC player, and import through an NTSC camcorder (..or the other way round, depending on where you are..) you might see if that can play the tape correctly.

Importing PowerShell module in C#

I'm trying to write some C# code to interact with Lync using PowerShell, and I need to import the Lync module before executing the
Lync cmdlets. However, my code doesn't seem to import the module and I keep getting a "get-csuser command not found" exception. Here is my code:
PowerShell ps = PowerShell.Create();
ps.AddScript(@"import-module Lync");
ps.Invoke();
ps.Commands.AddCommand("Get-csuser");
foreach (PSObject result in ps.Invoke())
Console.WriteLine(result.Members["Name"].Value);
Any idea how can I import the Lync module?

Got it, the module needs to be imported by its full path, and also the execution policy for both 64-bit powershell and 32-bit powershell
need to be set to Unrestricted (or anything other than restricted depending on your case). Here's the code:
static void Main(string[] args)
InitialSessionState initial = InitialSessionState.CreateDefault();
initial.ImportPSModule(new string[] {"C:\\Program Files\\Common Files\\Microsoft Lync Server 2010\\Modules\\Lync\\Lync.psd1"} );
Runspace runspace = RunspaceFactory.CreateRunspace(initial);
runspace.Open();
PowerShell ps = PowerShell.Create();
ps.Runspace = runspace;
ps.Commands.AddCommand("Get-csuser");
foreach (PSObject result in ps.Invoke())
Console.WriteLine(result.Members["Identity"].Value);

Files Renamed when importing to LR4 and now can't find them in LR3

Help! What should I do???
Yesterday I installed LR 4 Beta. I had a folder with 300 images in it on LR 3, obviously all files had names. I imported these photos into LR4 to work with LR4 and they were renamed in the process. Now in my LR3 folder, all the files still have there old names and the "missing photo ?" and I assume that's because the name has been changed and LR3 can't find them. Any thoughts on an easy fix?
Thanks,
Matthew Kraus

Thanks so much for helping me with this.
I must admit, I didn't pay too much attention when importing this "test"
group of photos to LR4, therein lies my problem. Now that I look at the
import settings that were used:
1. Files were not added or copied, they were "moved" to a new location and
also renamed.
2. Files were renamed starting with "264" using my regular import template.
Listed below are the first 10 photos with their original LR3 and he
changed LR4 names.
1201_001 changed to 1201_264-2
1201_002 changed to 1201_265-2
1201_003 changed to 1201_266-2
1201_004 changed to 1201_267-2
1201_005-Edit-Edit changed to 1201_268-2
1201_005-Edit changed to 1201_269-2
1201_005-Edit changed to 1201_270-2
1201_005-Edit-Edit-2 changed to 1201_271-2
I have a back up of my images on an EHD from several days ago which has the
original file names, but this backup only has 203 of the 268 images I
imported yesterday and are renamed.
Thanks again,
Matthew Kraus
2012/1/11 Dorin Nicolaescu-Musteață <[email protected]>
Re: Files Renamed when importing to LR4 and now can't find them in LR3 created by Dorin
Nicolaescu-Musteață <http://forums.adobe.com/people/dorin_nicolaescu> in *Photoshop
Lightroom* - View the full discussion<http://forums.adobe.com/message/4132062#4132062>

Problem with modules and ModuleLoader

Hi everybody,
i'm facing a real funny problem with modules and
moduleLoader, i hope
it's not (only) my fault anyway...
If i create a normal flex project with fBuilder, i'm able to
use
modules in a lot of different ways (as mxml, as as in a
function etc..)...
but if i try to use them in my fds application (created with
fds
eclipse plugin or as a dataServices project) i can't use
modules. The compile-time error message is
always the same:
Could not resolve <mx:ModuleLoader> to a component
implementation
I tried a lot of solutions, paying attention to import all
the classes, to declaration, naming, positioning
etc...but nothing changes, this thing is drivining me
crazy!!!.
I will appreciate anykind of help.
TIA
Fabio

Any idea?

Problem with Java keystore and certificates (unable to find valid cert path

Our program is made so that when a certificate is not signed by a trusted Certification Authority, it will ask the user if he/her wishes to trust the certificate or not. If they decide to trust the certificate, it will accept the self signed certificate and import it into the keystore and then use that certificate to log the user in. This works fine. It will import the certificate into the keystore and use the specified ip address to establish a connection with the LDAP server (Active Directory in our case) and authenticate properly. However, the problem arises when we then try and connect to a different ip address (without restarting tomcat, if we restart tomcat, it works fine...). It imports the certificate into the keystore fine, but always gives the exception
"Root exception is javax.net.ssl.SSLHandshakeException: sun.security.validator.ValidatorException: PKIX path building failed: sun.security.provider.certpath.SunCertPathBuilderException: unable to find valid certification path to requested target"
and does not authenticate with our LDAP server (which is Active Directory). The problem seems to be that it is no longer looking at the System.setProperty("javax.net.ssl.trustStore", myTrustStore);
I have tried multiple times to just reset this property and try and "force" it to read from my specified trust file when this error happens. I have also imported the certificates directly into the <java_home>/jre/lib/security/cacerts and <java_home>/jre/lib/security/jssecacerts directories as the java documentation says that it will look at those directories first to see if it can find a trusted certificate. However, this does not work either. The only way that I can get this to work is by restarting tomcat all together.
If both of the certificates are already in the keystore before tomcat is started up, everything will work perfect. Again, the only problem is after first connecting to an IP address using TLS and importing the certificate, and then trying to connect to another IP address with a different certificate and import it into the keystore.
One of the interesting features of this is that after the second IP address has failed, I can change the IP address back to the first one that authenticated successfully and authenticate successfully again (ie
I use ip 1.1.1.1, import self signed certificate, authenticates successfully
login with ip 2.2.2.2 import self signed certificate, FAILS
login again with 1.1.1.1 (doesn't import certificate because it is already in keystore) successfully authenticates
Also, I am using java 1.5.0_03.
Any help is greatly appreciated as I've been trying to figure this out for over a week now.
Thanks

Please don't post in threads that are long dead and don't hijack other threads. When you have a question, start your own topic. Feel free to provide a link to an old post that may be relevant to your problem.
I'm locking this thread now.

HELP! Downloaded LR5 and when open it shows an error message saying error while trying to change from modules and I can not even import photos. Am I doing something wrong?

HELP! Downloaded LR5 and when open it shows an error message saying error while trying to change from modules and I can not even import photos. Am I doing something wrong?

I have the same problem, and the solutions in Error changing modules | Lightroom do not work. Even uninstalling and reinstalling a new copy did not solve the problem. As anyone got an idea what other lingering files might be causing the problem?

How to import a image and compare with another image to find their deviation

i am new to labview , can anyone tell how to import a image and compare it with another image to find their deviation
Solved!
Go to Solution.

This is an quite easy task using the Vision Development Module.
There you can acquire images from cameras or read them form the harddrive, then differntiate them or since VDM 2010 calculate the optical flow between consecutive images.
Christian

Problem importing a module and finding it's commands?

Similar Messages

Maybe you are looking for