Problem in Database Replication in Oracle 9i

i am trying to do database replication but am facing problems in 9i.i have two machines on network and both have a database created.i also have a common schema in both the database (testuser is the name of schema). i have created database links between the two machines and when i check the link through OEM console then it shows that database link is active.when i add object to my master group it shows the status as need generation and when it try to generate replication support for the same the status changes to DOINGGEN.i am not able to get the status to GENERATED.my database names on both machines are different.could that be a problem.do we need to have same database name on both machines.plz help me out with this and if possible give me step wise details of how to do replication.i have tired it by following the steps given in oracle documentation.

use enterprise edition, i think you are using standered edition. moreover there should be primary key column in replicated tables.

Similar Messages

Problem with Database creating on Oracle 8.1.5 for Linux

I found some error when I use dbassist to create database. (
copy from CD method ) Error dialogue show "CD ROM not detected
". I use both '/cdrom' and '/mnt/cdrom' as cd-rom mount point ,
if this's not correct mount-point. Where should I mount my CD-
ROM ?
null

David Tamburin (guest) wrote:
: Does anyone have a successful installation of Oracle 8.1.5
: running on Red Hat 6.0? I have tried to install it but, I
can't
: get the installer to run. I get java errors when I run,
: runInstaller. I have installed jre1.1.6. Any help would be
: appreciated.
We have gotten it running on two RH6 machines. Took a little
extra work.
Briefly...
* Make sure you use the latest JRE, and try using the one
with native threads (if not you will have to hand edit the
netasst script and remove the -native flag)
* For some reason some of the libs that get installed are
zero length. Find the thread on this forum where someone posted
some sample code to recreate these. If I remember right its the
libjni library. It is a very short easy compile.
* Make sure you got lots of RAM (128 min) and double that in
swap
* Watch for binaries that get installed without the execute
bit set. For instance I think tnslsnr is one of them, as well as
SQLPlus. I can't remember exactly, but that's one other problem
to watch out for.
So far things here are working. I even tried a little java in a
stored procedure. My latest issue is trying to get the PROC
samples to compile.
-Scott
null

Problem creating database during installation Oracle 8i

Hi!
When I was installing Oracle 8i a problem appeared. This problem was about Database creation, when the program of the Oracle installation was creating the database an error message was appeared : ORA-01034:ORACLE NOT AVAILABLE. I aborted the creation of the database and Oracle 8i was installed successfully.Now I'm trying to create the database with dbassist program but the same error is showed. Is there some solution?
In addition, I'm installing Oracle 8.1.7 in a Sunblade 100 Sparc with Solaris 8.0.
With best wishes, Jordi Carrasco.

did you define the variable ORACLE_SID and ORACLE_HOME?

Database replication between Oracle RAC and Oracle Standalone DB

Hi,
We have currently 4 node RAC environment and Oracle RAC implementation with 4 Oracle instances. We want to move the one instance and make it Standalone with Oracle database due to availability issue. Thus we will remain with 3 nodes on the RAC database and one Standalone database. We want to implement Oracle replication on this solution, where partial database of RAC environment needs to be replicated to Standalone node.
We will have Oracle 9i database server for both RAC and Standalone machine.
The partial data that we are looking for replication are of size 25GB. Some of questions we have:
1. Is there any other replication mechanism apart from Materilzed view for this solution?
2. Is it feasible to sychronize around 25GB data between servers?
3. What can be estimated time for refresh or Synchronization?
Thanks in advance for help.

The methods that we are evaluating currently for this replication are:
1. Multi Master replication
2. Oracle 9i Datagaurd.
Please let me know if we need to look for some other methods of replication also.

Database replication between Oracle RAC and Oracle Standalone DB in 9i

Hi,
We have currently 4 node RAC environment and Oracle RAC implementation with 4 Oracle instances. We want to move the one instance and make it Standalone with Oracle database due to availability issue. Thus we will remain with 3 nodes on the RAC database and one Standalone database. We want to implement Oracle replication on this solution, where partial database of RAC environment needs to be replicated to Standalone node.
We will have Oracle 9i database server for both RAC and Standalone machine.
The partial data that we are looking for replication are of size 25GB. Some of questions we have:
1. Is there any other replication mechanism apart from Materilzed view for this solution?
2. Is it feasible to sychronize around 25GB data between servers?
3. What can be estimated time for refresh or Synchronization?
The methods that we are evaluating currently for this replication are:
1. Multi Master replication
2. Oracle 9i Datagaurd.
Please let me know if we need to look for some other methods of replication also.
Thanks in advance for help.

ManojMac wrote:
The partial data that we are looking for replication are of size 25GB. Some of questions we have:
1. Is there any other replication mechanism apart from Materilzed view for this solution?Streams is another option
2. Is it feasible to sychronize around 25GB data between servers?Sure. Depending on the rate of change, your latency requirements, whether the standalone database has the horsepower to apply all the changes generated by to other three nodes, etc.
3. What can be estimated time for refresh or Synchronization?Depends on the architecture, the network connection, whether you are doing incremental refreshes, etc. And it depends on what time you're measuring-- you might be measuring the latency between the RAC cluster and the standalone database, you might be measuring the time it takes to incrementally refresh a single materailized view when there have been no changes, you might be measuring the time it takes to do a complete refresh of an entire refresh group, pulling 25 GB of data over the network.
The methods that we are evaluating currently for this replication are:
1. Multi Master replication
2. Oracle 9i Datagaurd.DataGuard is not an option if you only want to replicate a subset of the data. The two realistic options are materialized views and Streams. Are you anticipating that you will be making changes on both nodes? If not, you can use simple materialized views rather than multi-master replication.
Since 9.2 is not longer covered by Premier Support, are you planning to upgrade to a supported version in the near future? In particular, Streams works a lot better in later versions of the database.
Justin

Strange problem with Database LInk

Hi Everyone,
I have strange problem with Database Link in Oracle 11g Express Edition;
There are two computers: computer-server and computer-client. Tnsnames.ora are the same on both computers ie.
CT =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = krzysztof)(PORT = 1521))
(CONNECT_DATA = (SERVICE_NAME = XE)
I created database link :
Create database link zdalny
Connect to <user_id> identified by <password>
using ‘CT’;
Client can’t connect with server when I am using above command. But when I change “using” for using ‘krzysztof:1521’ or using ‘krzysztof’ or using ‘server IP:1521’ – everything is ok.
Why I am asking. Because in all materials which I am reading about Oracle command with using ‘CT’ should be working correct. But there is not. Do you know, why?
Thanks in advance and apologize for my English.
Rgds
Krzysztof

Krzysztof Szymaniak wrote:
Thanks for all replies.
Below is server's tnsnames.ora
CT =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = krzysztof)(PORT = 1521))
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = XE)
EXTPROC_CONNECTION_DATA =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC1))
(CONNECT_DATA =
(SID = PLSExtProc)
(PRESENTATION = RO)
ORACLR_CONNECTION_DATA =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC1))
(CONNECT_DATA =
(SID = CLRExtProc)
(PRESENTATION = RO)
SQL Error: ORA-12154: TNS:could not resolve the connect identifier specified
12154. 00000 - "TNS:could not resolve the connect identifier specifie
Rgds
Krzysztof
PS. I tried with using 'XE' - not working.Assuming that is the correct tnsnames, of course XE is not working. You don't have a tnsnames entry for 'XE'.
You need to be aware that when using a dblink, the client is the db in which the link is defined, not the desktop from which you connect to that database.
I think you need to start here:
http://edstevensdba.wordpress.com/2011/02/26/ora-12154tns-03505/
http://edstevensdba.wordpress.com/2011/02/09/sqlnet_overview/ (Help! I can’t connect to my database )
http://edstevensdba.wordpress.com/2011/02/16/sqlnet_client_cfg/ (Help! I can’t connect to my database (part duex) )
The fact that your client (db link) is a database doesn't change anything taught in the above.

Interactive report performance problem over database link - Oracle Gateway

Hello all;
This is regarding a thread Interactive report performance problem over database link that was posted by Samo.
The issue that I am facing is when I use Oracle function like (apex_item.check_box) the query slow down by 45 seconds.
query like this: (due to sensitivity issue, I can not disclose real table name)
SELECT apex_item.checkbox(1,b.col3)
, a.col1
, a.col2
FROM table_one a
, table_two b
WHERE a.col3 = 12345
AND a.col4 = 100
AND b.col5 = a.col5
table_one and table_two are remote tables (non-oracle) which are connected using Oracle Gateway.
Now if I run above queries without apex_item.checkbox function the query return or response is less than a second but if I have apex_item.checkbox then the query run more than 30 seconds. I have resolved the issues by creating a collection but it’s not a good practice.
I would like to get ideas from people how to resolve or speed-up the query?
Any idea how to use sub-factoring for the above scenario? Or others method (creating view or materialized view are not an option).
Thank you.
Shaun S.

Hi Shaun
Okay, I have a million questions (could you tell me if both tables are from the same remote source, it looks like they're possibly not?), but let's just try some things first.
By now you should understand the idea of what I termed 'sub-factoring' in a previous post. This is to do with using the WITH blah AS (SELECT... syntax. Now in most circumstances this 'materialises' the results of the inner select statement. This means that we 'get' the results then do something with them afterwards. It's a handy trick when dealing with remote sites as sometimes you want the remote database to do the work. The reason that I ask you to use the MATERIALIZE hint for testing is just to force this, in 99.99% of cases this can be removed later. Using the WITH statement is also handled differently to inline view like SELECT * FROM (SELECT... but the same result can be mimicked with a NO_MERGE hint.
Looking at your case I would be interested to see what the explain plan and results would be for something like the following two statements (sorry - you're going have to check them, it's late!)
WITH a AS
(SELECT /*+ MATERIALIZE */ *
FROM table_one),
b AS
(SELECT /*+ MATERIALIZE */ *
FROM table_two),
sourceqry AS
(SELECT b.col3 x
       , a.col1 y
       , a.col2 z
FROM table_one a
    , table_two b
WHERE a.col3 = 12345
AND   a.col4 = 100
AND   b.col5 = a.col5)
SELECT apex_item.checkbox(1,x), y , z
FROM sourceqry
WITH a AS
(SELECT /*+ MATERIALIZE */ *
FROM table_one),
b AS
(SELECT /*+ MATERIALIZE */ *
FROM table_two)
SELECT apex_item.checkbox(1,x), y , z
FROM table_one a
    , table_two b
WHERE a.col3 = 12345
AND   a.col4 = 100
AND   b.col5 = a.col5If the remote tables are at the same site, then you should have the same results. If they aren't you should get the same results but different to the original query.
We aren't being told the real cardinality of the inners select here so the explain plan is distorted (this is normal for queries on remote and especially non-oracle sites). This hinders tuning normally but I don't think this is your problem at all. How many distinct values do you normally get of the column aliased 'x' and how many rows are normally returned in total? Also how are you testing response times, in APEX, SQL Developer, Toad SQLplus etc?
Sorry for all the questions but it helps to answer the question, if I can.
Cheers
Ben
http://www.munkyben.wordpress.com
Don't forget to mark replies helpful or correct ;)

Problem with using database link from oracle 7 to oracle 9i

Hi To Every One
I have two oracle database oracle 7.3.4.0.1 and oracle 9i 9.2.0.1.0.
and the tns alias to connect to oracle 9i database is oracle9i and tns
alias to oracle 7 database is oracle7.I have no problem in connect to
these database using these tns aliases from either database.The tns
alias for oracle 7 is available in tnsnames.ora file of oracle9i and
tns alias for oracle 9i is available in tnsnames.ora file of oracle 7.
So there is no connection problem from each other.Connection is
working fine for each other but the problem with database links is
like this
Problem:
when i create database link from oracle9i user or public database link
from oracle9i for oracle7 user like this
SQL ORACLE9I >CREATE DATABASE LINK ORACLE7 CONNECT TO <ORACLE7USER>
IDENTIFIED BY <PASSWORD> USING 'ORACLE7';
OR
SQL ORACLE9I >CREATE PUBLIC DATABASE LINK ORACLE7 CONNECT TO <ORACLE7USER>
IDENTIFIED BY <PASSWORD> USING 'ORACLE7';
The links get created sucessfully but when i write command like
SQL ORACLE9I> DESC <ORACLE7USER_NAME>.<ORACLE7USER_TABLENAME>@ORACLE7
I RECEIVE A ORACLE ERROR LIKE
ORA-12663 SERVICE REQUIRED BY CLIENT IS NOT AVAILABLE ON THE SERVER.
OR IF MY COMMAND IS LIKE
SQL ORACLE9I> SELECT <FEILD_NAME> FROM
<ORACLE7USER_NAME>.<ORACLE7USER_TABLENAME>@ORACLE7;
I RECEIVE AN ORACLE ERROR LIKE
ORA-01002 FETCH OUT OF SEQUENCE.
ORA-02063: preceding line from ORACLE7
BUT IF I CREATE A LINK FROM ORACLE7 USER FOR ORACLE9I USER
IT WORKS FINE.
PLZ HELP ME WHAT IS THE PROBLEM THAT THE LINK FOR ORACLE 7 IS NOT WORKING WHEN
IT IS BEING CREATED FROM ORACLE9I.
Thank u.

Oracle 9.2.0 does not support connectivity to Oracle 7. The newest version that will support this is 9.0.1.

Problem finding data in an Oracle Database using CMP beans

I am having a problem retrieving data from an Oracle database that has a date as
part of the key. This data was loaded into my database via a batch process writing
in java using java.sql.Date to store the date information. When calling the findByPrimaryKey
method of a CMP Entity Bean I continued to get the FinderException. I know this
data is in my database because I can view the data via SQLPlus and Microsoft Access.
Has anyone ever experience problems with CMP beans accessing data from an Oracle
database that had a date as part if the key or with accessing data in the database
that insert via another method outside of your CMP bean. I desperately need some
answers.

Hi Dave,
You should probably post this type of question in the CMP or JDBC section
for best results. Chances are that the date is suffering from a rounding
problem (it could be a date/time in the database with a different time zone)
or is not the date that you think it is (wrong century or millenium). I've
seen both. You need to write a quick piece of code that loads in those
values as both Java timestamps and dates and makes sure that they are what
you think they are.
Peace,
Cameron Purdy
Tangosol Inc.
Tangosol Coherence: Clustered Coherent Cache for J2EE
Information at http://www.tangosol.com/
"Dave White" <[email protected]> wrote in message
news:3c1a4ac3$[email protected]..
>
I am having a problem retrieving data from an Oracle database that has adate as
part of the key. This data was loaded into my database via a batchprocess writing
in java using java.sql.Date to store the date information. When callingthe findByPrimaryKey
method of a CMP Entity Bean I continued to get the FinderException. Iknow this
data is in my database because I can view the data via SQLPlus andMicrosoft Access.
Has anyone ever experience problems with CMP beans accessing data from anOracle
database that had a date as part if the key or with accessing data in thedatabase
that insert via another method outside of your CMP bean. I desperatelyneed some
answers.

Problem connecting DataBase Link from windows oracle to oracle on Linux

I'm facing a problem with database links from windows oracle to Oracle hosted on Linux server.
I'm able to successfully create the Database Link using the following query on oracle database hosted on a windows server
CREATE DATABASE LINK SampleDB
CONNECT TO myuser IDENTIFIED BY password
USING 'sample';
The tns names entry on windows for database in Linux server is as follows
DSOFT =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = 192.168.0.100)(PORT = 1521))
(CONNECT_DATA =
(SERVICE_NAME = sample)
But while executing the query "select count(*) from doctor@SampleDB;" in sql developer on windows, I'm getting the following error
SQL Error: ORA-12154: TNS:could not resolve the connect identifier specified
12154. 00000 - "TNS:could not resolve the connect identifier specified"
*Cause: A connection to a database or other service was requested using
a connect identifier, and the connect identifier specified could not
be resolved into a connect descriptor using one of the naming methods
configured. For example, if the type of connect identifier used was a
net service name then the net service name could not be found in a
naming method repository, or the repository could not be
located or reached.
Using the above tns entries, i'm successfully able to connect to the database in Linux server through sql developer installed on the windows machine. Then why i'm getting this error while executing the query on Database Link?. Can any one help me?

1005745 wrote:
I'm facing a problem with database links from windows oracle to Oracle hosted on Linux server.
I'm able to successfully create the Database Link using the following query on oracle database hosted on a windows server
CREATE DATABASE LINK SampleDB
CONNECT TO myuser IDENTIFIED BY password
USING 'sample';
The tns names entry on windows for database in Linux server is as follows
DSOFT =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = 192.168.0.100)(PORT = 1521))
(CONNECT_DATA =
(SERVICE_NAME = sample)
But while executing the query "select count(*) from doctor@SampleDB;" in sql developer on windows, I'm getting the following error
SQL Error: ORA-12154: TNS:could not resolve the connect identifier specified
12154. 00000 - "TNS:could not resolve the connect identifier specified"
*Cause: A connection to a database or other service was requested using
a connect identifier, and the connect identifier specified could not
be resolved into a connect descriptor using one of the naming methods
configured. For example, if the type of connect identifier used was a
net service name then the net service name could not be found in a
naming method repository, or the repository could not be
located or reached.
Using the above tns entries, i'm successfully able to connect to the database in Linux server through sql developer installed on the windows machine. Then why i'm getting this error while executing the query on Database Link?. Can any one help me?A database link is acting as a client to the target, remote database in exactly the same fashion and using exactly the same tns infrastructure as any other client trying to connect to that remote database. your ORA-12154 when querying a db link means exactly the same as if you had gotten it trying to connect with sqlplus, from the same server. Check the link SB provided. Keep in mind that the tnsnames file of concern is the one on the source database server.

A Problem with accessing to a Oracle Database

When i try to obtain data from the a database in an Oracle Server, i cannot obtain the data fromthe server, I made the same using the example with LoanBean using the derby client, but I cannot do the same with Oracle.
The result of this is:
java.lang.NullPointerException
and the code:
if (rightName.equals(user.getText() && (rightPass.equals(pass.getText()))
Please, help me.

Hi Ivan,
Are you sure that is't Oracle problem? How code you specified is related to Oracle?
Find out which of variables is null. It cab be easily done with operators like
info("rightName="+rightName);
before operator you specify.
Another way is to use debugger.
Thanks, Misha
(Creator team)

Problem with ACS 4.2 Database replication

Greetings,
I am not able to replicate Database between two ACS SE 4.2. I am getting the following error:
Inbound database replication from ACS 'ACS_BEX_001' denied - shared secret mismatch.
The configuration apparently is ok. I am attaching the configuration from both ACS.

The solution posted by Nevin is correct, but I must add some explanations. I had the problem yesterday and I proceeded like Nevin told:
- I connected to the console and made a "show".
- The IP was the correct one, but as indicated I made a "set ip"
- The system asked for the new IP, showing the old one between brackets: ie "New IP [10.10.10.1]:"
- I pressed Intro, because the IP is correct.
- After confirming the IP, mask, gateway and DNS the system asked me to verify connectivity. I did it and was correct.
- The second time it asked to check connectivity I answered No. and nothing happened.
- We checked through the web but the "Self" IP was still 127.0.0.1.
- So I made the process again BUT this time I changed the the IP to another one. After finishing, (when I answered No to check connectivity) I saw that the system was stopping all ACS processes and starting then again.
- In the web page the "Self" IP was the new one.
- I made the process again changing the IP to the original one. This time also the system stopped and started all processes.
- In the web page the "Self" IP was correct.
- Now the replication worked correctly.
So the problem was that the system is "inteligent" and if it discover that you don't change the IP (even if you change the DNS), it doesn't reconfigure it. So you must change to another IP (even a dummy one) and the change again to the correct one.
I hope this can help to other people.

Problem in establishing connectin to Oracle Database using TOMCAT-APACHE

Hello can anyone help me i can't establish a coonection to Oracle Database eventhough i have set everything in my server.XML...
I manage to connect to ACCES database but not Oracle... help me... here is the resource portion in my server.xml

<Context path="/forum" docBase="forum" debug="0" reloadable="true">
<Logger className="org.apache.catalina.logger.FileLogger" prefix="localhost_forum_log." suffix=".txt" timestamp="true"/>
<Resource name="jdbc/forumDb" auth="Container" type="javax.sql.DataSource"/>
<ResourceParams name="jdbc/forumDb">
<parameter><name>user</name><value></value></parameter>
<parameter><name>password</name><value></value></parameter>
<parameter><name>driverClassName</name><value>sun.jdbc.odbc.JdbcOdbcDriver</value></parameter>
<parameter><name>driverName</name><value>jdbc:odbc:forumDb</value></parameter>
</ResourceParams>
</Context>

<Context path="/pmod" docBase="pmod" debug="0" reloadable="true">
<Logger className="org.apache.catalina.logger.FileLogger" prefix="localhost_pmod_log." suffix=".txt" timestamp="true"/>
<Environment name="maxExemptions" type="java.lang.Integer" value="15"/>
<Parameter name="context.param.name" value="context.param.value" override="false"/>
<Resource name="jdbc/pmodDb" auth="Container" type="javax.sql.DataSource"/>
<ResourceParams name="jdbc/pmodDb">
<parameter><name>user</name><value>pmod_owner</value></parameter>
<parameter><name>password</name><value>pmod_owner</value></parameter>
<parameter><name>driverClassName</name><value>oracle.jdbc.driver.OracleDriver</value></parameter>
<parameter><name>driverName</name><value>jdbc:oracle:thin:@192.9.200.2:1521:PMOD</value></parameter>
</ResourceParams>
</Context>
can anyone help... thanks...
sharil

hello....
here is how i do it if i use access, i just set in my server.xml as bellow....

<Context path="/pmod" docBase="pmod" debug="0" reloadable="true">
<Logger className="org.apache.catalina.logger.FileLogger" prefix="localhost_pmod_log." suffix=".txt" timestamp="true"/>
<Ejb name="ejb/User" type="Session" home="pmod.user.UserHome" remote="pmod.user.User"/>
<Environment name="maxExemptions" type="java.lang.Integer" value="15"/>
<Parameter name="context.param.name" value="context.param.value" override="false"/>
               <Resource name="jdbc/pmodDb" auth="SERVLET" type="javax.sql.DataSource"/>
               <ResourceParams name="jdbc/pmodDb">
               <parameter><name>user</name><value></value></parameter>
               <parameter><name>password</name><value></value></parameter>
<parameter><name>driverClassName</name><value>sun.jdbc.odbc.JdbcOdbcDriver</value></parameter>
          <parameter><name>driverName</name><value>jdbc:odbc:pmodDb</value></parameter>
</ResourceParams>
</Context>
later i would call from my servlet as follows
InitialContext initCtx = new InitialContext ();
DataSource ds = (DataSource)initCtx.lookup ("java:comp/env/jdbc/pmodDb");
conn = ds.getConnection();
then i can establish connection to my database... but now i change to oracle and my server.xml i configure as follows

<Context path="/pmod" docBase="pmod" debug="0" reloadable="true">
          <Logger className="org.apache.catalina.logger.FileLogger" prefix="localhost_pmod_log." suffix=".txt" timestamp="true"/>
<Environment name="maxExemptions" type="java.lang.Integer" value="15"/>
<Parameter name="context.param.name" value="context.param.value" override="false"/>
          <Resource name="jdbc/pmodDb" auth="Container" type="javax.sql.DataSource"/>
          <ResourceParams name="jdbc/pmodDb">
               <parameter><name>user</name><value>pmod_owner</value></parameter>
               <parameter><name>password</name><value>pmod_owner</value></parameter>
               <parameter><name>driverClassName</name><value>oracle.jdbc.driver.OracleDriver</value></parameter>
               <parameter><name>driverName</name><value>jdbc:oracle:thin:@192.9.200.2:1521:PMOD</value></parameter>
</ResourceParams>
</Context>
and i call from my servlet like before ...
InitialContext initCtx = new InitialContext ();
DataSource ds = (DataSource)initCtx.lookup ("java:comp/env/jdbc/pmodDb");
conn = ds.getConnection();
the datasource would return null in other word i cannot find the database
however if i tried to establish connection directly,
String u1 = "pmod_owner";
String p1 ="pmod_owner";
String path = "jdbc:oracle:thin:@192.9.200.2:1521:PMOD";
DriverManager.registerDriver(new oracle.jdbc.driver.OracleDriver());
conn = DriverManager.getConnection( path, u1, p1 );
i can talk with the database....
so if anyone out there can help me to point me where did i go wrong?
fyi: i have put a lib which contains oracle jdbc driver called classes12.zip in my c:\tomcat\common\lib\
thank you

Installation problem of ISSUE_TRACKER_1.6 on Oracle Express XE

Sorry, but I'm new to HTMLDB, and have seen similar problems listed on the forum, but they have not given me insight into my problem.
I am running Oracle XE beta on Windows. I only have one workspace and user at the moment. I imported the application, and had it load into my workspace. The 3 tables are in the database, and the data is loaded.
Unfortunately, when I try to run the Issue Tracker I get:
Error Unable to fetch authentication_scheme in application 100.
The Debug output:
0.00: S H O W: application="100" page="1" workspace="" request="" session="13190102205862944177"
0.00: ...Language derived from: FLOW_PRIMARY_LANGUAGE, current browser language: en-us
0.00: alter session set nls_language="AMERICAN"
0.00: alter session set nls_territory="AMERICA"
0.00: NLS: CSV charset=WE8MSWIN1252
0.00: ...Setting NLS Decimal separator="."
0.00: ...Setting NLS Group separator=","
0.00: ...Setting NLS date format="DD-MON-RR"
0.00: NLS: Language=en-us
0.00: Application 100, Authentication: CUSTOM2, Page Template: 8088318536817124
0.02: Show ERROR page...
0.02: Fetch session state from database
0.02: Processing point: AFTER_ERROR_HEADER
ORA-0000: normal, successful completion
Error Unable to fetch authentication_scheme in application 100.
OK
0.02: Processing point: BEFORE_ERROR_FOOTER
0.02: ...Determine if user MRO with SGID 702411932698381 can develop application 100 in workspace 702411932698381
I'm sure it is something simple, but will await your reply.
Thanks!
<<Martin Farber>>

SQL> select id||':'||security_group_id from wwv_flow_custom_auth_setups where fl
ow_id=100
2 /
no rows selected
SQL> select custom_authentication_process||':'||security_group_id from wwv_flows
where id=100
2 /
CUSTOM_AUTHENTICATION_PROCESS||':'||SECURITY_GROUP_ID
.8095935619817161.:702411932698381

Installation problem with Siebel8.0 on Oracle Enterprise Linux 4 system

We are having installation problem with Siebel8.0 on Oracle Enterprise Linux 4 system.
Using interface, when installation come up to “Installing Wizard” window where Gateway Name Server Configuration window should take place, everything just freeze up
Using console, after installation we obtain following errors:
Installing Siebel Enterprise Server. Please wait...
unable to launch: "ksh export
LD_LIBRARY_PATH=/siebel/gtwysrvr/lib;PATH=${PATH}:.;/root/istemp8058094162222/_bundledJRE_/bin/java
-Dtemp.dir=/root -cp /siebel/gtwysrvr/bin/setup.jar run -args LANG=ENU
MODE=LIVE MODEL_FILE=/siebel/gtwysrvr/admin/enterprise_console.scm" error code:
"236"(SBL-STJ-00152)
LD_LIBRARY_PATH=/siebel/siebsrvr/lib;PATH=${PATH}:.;/root/istemp8058094162222/_bundledJRE_/bin/java
-Dtemp.dir=/root -cp /siebel/siebsrvr/bin/setup.jar run -args LANG=ENU
REPEAT=FALSE MODE=LIVE MODEL_FILE=/siebel/siebsrvr/admin/siebel_server.scm"
error code: "236"(SBL-STJ-00152)
LD_LIBRARY_PATH=/siebel/siebsrvr/mgmtagent/lib;PATH=${PATH}:.;/root/istemp8058094162222/_bundledJRE_/bin/java
-Dtemp.dir=/root -cp /siebel/siebsrvr/mgmtagent/bin/setup.jar run -args
LANG=ENU MODE=LIVE
MODEL_FILE=/siebel/siebsrvr/mgmtagent/admin/mgmtagent_ses.scm" error code:
"236"(SBL-STJ-00152)
Running command :
./ssincfgw -is:javaconsole -console -args LANG=ENU MODE=LIVE MODEL_FILE=/siebel/gtwysrvr/admin/enterprise_console.scm
Infinite loop of following error pops out:
An error occurred during wizard bean change notification:
java.lang.NoClassDefFoundError
at ConfigInitialize.execute(ConfigInitialize.java:21)
at com.installshield.wizard.StandardWizardListener.execute(StandardWizardListener.java:123)
Is there any clue how this error can be solved??
Thanks in advance!!
Gordon
Message was edited by:
user605023

I'm facing the same error message while install Siebel 8.0 on OEL. But before I had this ksh problem, it complains about disc space first, and I actually has plenty of disk space under the directory (it needs only 0.7 G and I have 17G free). Anybody has encountered such problem before?
/net/sdcnas05/vol/engfs01/v_sia/8.0SIA[20405|http://forums.oracle.com/forums/]/Release/Linux/Server/Siebel_Enterprise_Server
-bash-3.00$ ./setuplinux -is:javaconsole -console
Initializing InstallShield Wizard........
Initializing InstallShield Wizard........
Launching InstallShield Wizard........
0% 25% 50% 75% 100%
Welcome to the InstallShield Wizard for Siebel Enterprise Server
The InstallShield Wizard will install Siebel Enterprise Server on your
computer.
To continue, choose Next.
Siebel Enterprise Server
Siebel Systems
Press 1 for Next, 3 to Cancel or 4 to Redisplay [1]
Siebel Enterprise Server Install Location
Please specify a directory or press Enter to accept the default directory.
Directory Name: [siebel] /slot/ems1115/appmgr/20405
Press 1 for Next, 2 for Previous, 3 to Cancel or 4 to Redisplay [1]
Please select the products you wish to install.
[ ] 1 - Gateway Name Server
[ ] 2 - Siebel Server
[ ] 3 - Database Configuration Utilities
[ ] 4 - EAI Connectors
To select an item enter its number, or 0 when you are finished: [0]: 1
[X] 1 - Gateway Name Server
[ ] 2 - Siebel Server
[ ] 3 - Database Configuration Utilities
[ ] 4 - EAI Connectors
To select an item enter its number, or 0 when you are finished: [0]: 2
[X] 1 - Gateway Name Server
[X] 2 - Siebel Server
[ ] 3 - Database Configuration Utilities
[ ] 4 - EAI Connectors
To select an item enter its number, or 0 when you are finished: [0]:
Press 1 for Next, 2 for Previous, 3 to Cancel or 4 to Redisplay [1]
Configuring uninstallers. Please wait...
0% 25% 50% 75% 100%
Choose the setup type that best suits your needs.
[X] 1 - Typical
[ ] 2 - Compact
[ ] 3 - Custom
To select an item enter its number, or 0 when you are finished: [0]
Press 1 for Next, 2 for Previous, 3 to Cancel or 4 to Redisplay [1]
Please select the languages you wish to install.
[X] 1 - enu - English (American)
[ ] 2 - fin - Finnish
[ ] 3 - kor - Korean
[ ] 4 - cht - Chinese (Traditional)
[ ] 5 - ita - Italian (Standard)
[ ] 6 - esn - Spanish (Modern)
[ ] 7 - deu - German (Standard)
[ ] 8 - chs - Chinese (Simplified)
[ ] 9 - tha - Thai
[ ] 10 - dan - Danish
[ ] 11 - heb - Hebrew
[ ] 12 - fra - French (Standard)
[ ] 13 - nld - Dutch (Standard)
[ ] 14 - ptb - Portuguese (Brazilian)
[ ] 15 - csy - Czech
[ ] 16 - jpn - Japanese
[ ] 17 - ptg - Portuguese (Standard)
[ ] 18 - ara - Arabic (Sa`udi)
[ ] 19 - sve - Swedish
To select an item enter its number, or 0 when you are finished: [0]
Press 1 for Next, 2 for Previous, 3 to Cancel or 4 to Redisplay [1]
{color:#ff0000}*Drive "/slot/ems1115/appmgr/20405" does not have enough space to install the*
selected configuration. Please free up "766446" KB on drive
*"/slot/ems1115/appmgr/20405" before continuing.*{color}
-bash-3.00$ pwd
/slot/ems1115/appmgr/20405
-bash-3.00$ df -h .
Filesystem Size Used Avail Use% Mounted on
sdc1002nap-vlan1:/vol/ems_39426_1115
71G 55G 17G 77% /slot/ems1115

Problem in Database Replication in Oracle 9i

Similar Messages

Maybe you are looking for